e3500 handheld explosive detector

Click here to load reader

Download E3500 Handheld Explosive Detector

Post on 21-Jan-2016

277 views

Category:

Documents

7 download

Embed Size (px)

DESCRIPTION

E3500 Handheld Explosive Detector. E3500 Handheld Explosive Detector Scintrex Trace Corp. Scintrex Trace Corp. has created various units through the years and have always used the old units as a platform for improvement. Below is a brief list of units created through the years: - PowerPoint PPT Presentation

TRANSCRIPT

  • E3500 Handheld Explosive Detector Scintrex Trace Corp.

    E3500 Handheld Explosive Detector

  • Product History

    Scintrex Trace Corp. has created various units through the years and have always used the old units as a platform for improvement. Below is a brief list of units created through the years:

    EVD-1 (no longer available); EVD-8000 (no longer available)E5000 GC/IMS Detection Desktop System (formally the Orion)VE-6000 (formally called the LVBDS)EVD-2500/3000 (most popular and widely used)E3500 (our newest and latest products)

  • RDXNO2PyrolysisNO2Detection Principle, Thermo-Redox Luminol

  • Detection Principle, Thermo-Redox LuminolResults:Greater SensitivityLower False Alarm RateLarger Detection Capability for NO2Bonus Peroxides Capability (TATP -Triacetone) (, HMTD High Organic Explosive Chemical)

  • Trace Explosive Detector: Vapour and Particulate Capabilities Technology: Luminol Chemiluminescence, patent cell type

    Detectable Compounds: Most military and commercially available explosives, TATP, HMTD, Urea nitrate, including ICAO Taggants(DMNB, EGDN, o-MNT, p-MNT)

    Detection Level: low nanogram for particulate and low ppb for vapour.

    Consumables: Luminol cartridges (approximately for 2,000 samplesor 1 to 2 months inside the unit)Specifications

  • Specifications Typical Time/Analysis: 16 seconds, two sample @ 8 seconds

    Warm Up Time: 1 minute initial start-up Carrier gas: none Communication: RS-232 serial output port for remote control and monitoring via personal computer or pocket PC via wireless option Power supply: 12 volt DC rechargeable battery pack (4 hours of samples, 8 hours in idle mode), AC/DC power supply, external battery pack with charger and Car Lighter adapter

  • Specifications Operating temperature: -10C to +55 (+14 to + 131F)

    Storage Temperature: -10 to + 65 (+ 14 to + 149F)

    Unit weight: 3 kg (6.6 lbs) with battery

    Unit dimensions (LxWxH): 51x14x11 cm / 20x5.5x4.3

    Standard Equipment: Carry case, 2 batteries with universal charger, sample screens (12), luminol cells (12), accessory kit, verification samples, serial cable, shoulder strap, fuses (5), earphone, screw drivers (3), cotton gloves, and manual

  • E3500 System

  • E3500 Sample Introduction Particle: dry transfer from wipes onto screen andinsert into the unit via slot Vapour: direct suction through front nozzle

  • Display Information VAPOR RN0038 PK HEIGHT -0970 PK AREA -0002744 PK POS 030This is the main display on the unitPeak HeightPeak AreaSample NumberPeak PositionMessage Centre (Mode of operation, Errors)Sample Values

  • Display InformationThis is the sample display on the unitPeaks, Sample vs BackgroundMessage CentreBaselineMode of UnitZoom LevelBattery Voltage

  • Communication From SystemThe E3500 can easily be connectedvia a computers HyperTerminal connection.This allows the client full access to the unit.

  • Communication From SystemThe unit can be link to any PDF via wireless option

    The unit can be link and controlled remotely via Computer Program option

  • Scintrex Trace Market

  • Summary of E3500This new product comes from a long line of excellent trace detectors and we are confident that this new generation will meet your requirements for many years to come.

    We thank you for your time and interest in our company and its products. If you require further information, contact our AGSC office: +254 20 3743905

    ***************

View more