eaz lift weight distribution hitches · fits 2” x 2” receiver part number shank size length...
TRANSCRIPT
Adjustable tow ball mount height positions
Easy tow ball mount angle adjustments
Easy assembly and installation
Tested in Australia and compliant with Australian Standards (ADR62/01)
Manufactured from high grade materials
Designed with ease of operation in mind, the Eaz Lift Weight Distribution Hitch has high grade machine tapered round spring steel bars and is available in
a 600 or 800 Series with various shanks sold separately. The Eaz Lift range of weight distribution hitches include
bolt together tow ball mounts that are completely adjustable for changing tow ball heights and angles to
suit different applications. The left and right sway control mounting facility is already provided for, should you later require a sway control kit for additional towing comfort and safety. All necessary parts come with each hitch including hook-up brackets, spring bars, chains,
tow ball mount, hitch pin, clip and bolt package for adjusting your hitch.
• Please note shanks are sold separately
TIP - Do not overload any part of your towing system. Consult the vehicle manual for towing recommendations
and limitations.
EAZ LIFT WEIGHT DISTRIBUTION HITCHES
EAZ LIFT WEIGHT DISTRIBUTION HITCHES
WEIGHT DISTRIBUTION HITCHES
DEALER / SUPPLIER
WEIGHT DISTRIBUTION HITCH AVAILABLE SHANKS
SWAY CONTROL BAR AND LUBRICANT
The Eaz Lift screw on sway controls minimize the sway caused from passing trucks and sudden gusts of wind. Its double friction disc brake principle enables it to constantly reduce the sway and hence improves vehicle handling. Note: Vehicles over 24’ may require two sway controls.
350-05800 EAZ LIFT SCREW-ON SWAY CONTROL -DRIVERS SIDE/RIGHT HAND MOUNTED350-05810 EAZ LIFT SCREW-ON SWAY CONTROL -PASSENGER SIDE/LEFT HAND MOUNTED
The EazLift Adjustable Ball Mount offers a huge range tow ball height adjustment, up to 680mm across EazLift’s range of compatible shanks.
350-05730 Adjustable Ball Mount
350-05720CAN BE USED IN HIGH OR LOW POSITION
350-05724CAN BE USED IN HIGH OR LOW POSITION
350-05728TO BE USED IN LOW POSITION ONLY
HI-LOW SHANK EXTRA LOW SHANKS EXTRA HI-LOW SHANK
Used in either the high or low position to match the tow ball mount to any coupler height. Long hi-low shanks provide the extra length sometimes needed to obtain clearance from bumper interference.
HI-LOW SHANKFits 2” x 2” receiver
Low mounted: + 45mm lift / + 135mm liftHigh mounted: + 135mm lift / + 225mm lift
EXTRA HI-LOW SHANKFits 2” x 2” receiver
Low mounted: - 50mm lift / + 40mm liftHigh mounted: + 225mm lift / + 315mm lift
EXTRA LOW SHANK
Low mounted:- 50mm lift / - 140mm lift
EAZ LIFT 600 SERIES (272KG) WEIGHT DISTRIBUTION HITCH No Shank350-05600
EAZ LIFT 800 SERIES (363KG) WEIGHT DISTRIBUTION HITCH No Shank350-05610
AUSTRALIA: www.coastrv.com.au NEW ZEALAND: www.coastrv.co.nz Email: NSW: [email protected]
QLD: [email protected] VIC: [email protected]: [email protected] NZ: [email protected]
TECHNICAL: [email protected]
PROUDLY DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY