ebco equilibrium float valves for water services equilibrium float valves for water services mark 1...
TRANSCRIPT
ATLANTIC PLASTICS is a company of
EBCO Equilibrium Float Valvesfor Water Services
Mark 1 and 2 for water services
Equilibrium Float Valves
The range of EBCO high flow rate Float Valves are simple and robust and can reliably self-compensate for changes in water supply pressures. One size of seat and one size of ball float will suit any working pressure up to the maximum recommendation of 10bar (150psi) for the reduced bore float valve or 5bar (72psi) for the full bore float valve. Even at these pressures the full bore or reduced bore seat combined with the hydraulically balanced closing action gives fast, quiet and smooth shut-off.
Valves are available in: 3/4” to 6” MK 2 Reduced Bore - Threaded 1 1/2” to 6 MK 2 Reduced Bore - Reduced 1/2” to 4” MK 1 Full Bore - Threaded 3/4” to 4” MK 1 Full Bore - Reduced
Benefits
Available in full or reduced bore configurations to suit pressures up to 10 bar (150psi) whilst still maintaining a fast, quiet and smooth shut off action.
Available with flanged or male BSP threaded connections to suit most connection situations. The body of the valve is made from corrosion immune Gunmetal giving years of trouble free service.
Design and selection of materials gives high strength for installation and operation, and corrosion resistance for long life.
One size of seat and one size of ball float suits any working pressure up to the maximum recommended of 5 bar (72psi) for the full bore valve or 10 bar (150psi) for the reduced bore valve.
Technical help
For further technical data, product specifications and general information please contact our Customer Service Department at the telephone number shown on the closing page.
Technical data
Mark 1 (Full Bore)
Pressures: Working: 5bar (72psi) Test (Max): 10bar (150psi) Integral full bore seat gives full high flow rates
Mark 2 (Reduced Bore)
Pressures: Working: 10bar (150psi) Test (Max): 20bar (300psi) The pressures stated above apply with water temperatures up to 20°C
Temperature (Mark 1 and 2) Up to 65°
Temperature increases may affect the installed life of the product. For further information relating to operating temperatures please contact our customer service department at the telephone number shown in the contact details on the closing page.
Materials (Mark 1 and 2)
Body: Gunmetal Lever arm: DZR Brass Lever arm claw: Gunmetal Ball Float: Copper Back nut: Plastic, Brass or Gunmetal
Safety
As with all industrial products it is important to take adequate safety precautions such as the use of adequate protective clothing like gloves, overalls, eye protection and safety footwear during installation, use and maintenance of this product.
Back nutOutlet
Inlet
Lever Arm
Body
Lever ArmFlangeFace
Body
Outlet
Inlet
Equilibrium Float Valve(Flanged Inlet)
Equilibrium Float Valve(BSP Male Threaded Inlet)
Back nutOutlet
Inlet
Lever Arm
Body
Lever ArmFlangeFace
Body
Outlet
Inlet
Equilibrium Float Valve(Flanged Inlet)
Equilibrium Float Valve(BSP Male Threaded Inlet)
We reserve the right to change the design and specification without notice.
© Tyco 2007 2K (06/07) TEBC/400.2
Equilibrium Float Valves
2
Range - Mark 2 Equilibrium Float Valve - Reduced Bore Seat Size 3/4”� 1”� 11/4”� 11/2”� 2”� 21/2”* 3”* 4”* 6”*
Float Valve internal bore 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 4”Recommended diameter of ball float 41/2” 51/2” 6” 7” 8” 12” 14” 15” 16”
Method of lever/float valve attachment Stud Stud Stud Stud Stud Stud Claw Claw ClawThread size of lever to stud/claw attachment 5/16” 3/8” 3/8” 7/16” 1/2” 9/16” 3/4” 3/4” 7/8”
Length from inlet flange to end of ball 17” 22” 25” 27” 30” 36” 39” 42” 47”Length of lever arm 10” 13” 16” 17” 18” 19” 20” 21” 23”
Length of Screwed inlet (BSP threaded versions only) 11/2” 11/2” 2” 21/4” 21/2” 3” 31/2” 4” 5”Centre line of valve to bottom outlet 1” 11/2” 2” 21/4” 21/2” 3” 31/4” 33/4” 43/4”
Range - Mark 1 Equilibrium Float Valve - Full Bore Seat Size 1/2”� 3/4”* 1”* 11/4”* 11/2”* 2”* 21/2”* 3”* 4”*
Float Valve internal bore 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 4”Recommended diameter of ball float 41/2” 51/2” 6” 7” 8” 12” 14” 15” 16”
Method of lever/float valve attachment Stud Stud Stud Stud Stud Stud Claw Claw ClawThread size of lever to stud/claw attachment 5/16” 3/8” 3/8” 7/16” 1/2” 9/16” 3/4” 3/4” 7/8”
Length from inlet flange to end of ball 17” 22” 25” 27” 30” 36” 39” 42” 47”Length of lever arm 10” 13” 16” 17” 18” 19” 20” 21” 23”
Length of Screwed inlet (BSP threaded versions only) 11/4” 11/2” 11/2” 2” 21/4” 21/2” 3” 31/2” 4”Centre line of valve to bottom outlet 1” 11/2” 2” 21/4” 21/2” 3” 31/4” 33/4” 43/4”
The Mark 1 Equilibrium float valve is available in sizes 1/2” to 4” and is primarily designed for use at pressures of up to 5bar (72psi)� Only available with BSP threaded inlets * Available with BSP threaded inlets or Flanged inlets
The Mark 2 Equilibrium float valve is available in sizes 3/4” to 6” and is primarily designed for use at pressures of up to 10bar (150psi)� Only available with BSP threaded inlets * Available with BSP threaded inlets or Flanged inlets
� To conform with the current UK anti-backsiphonage requirements no provision ismade for the attachment of a silencing pipe to the outlet.
� These valves must be fitted with a copper ball float. Using a lightweight plasticfloat may impair the action of the valve.
� These fittings are designed for the conveyance of cold potable water. Save withthe express written approval of EBCO, no warranty is given that the fittings are suitable for any other purpose.
Notes
These fittings are designed for the conveyance of cold potable water. Save with the express written approval of EBCO, no warranty is given that the fittings are suitable for any other purpose.
Associated Products
The EBCO range of gunmetal stopcocks and plugcocks provide a reliable and robustselection of shut off devices for use with PE, copper or threaded iron pipes. The rangeconsists of three basic types:
� BS5433 - This screwdown type stopcock is available for use with metric and imperial PE pipe using either compression type outlets or the EBCO Push Fit connection, type B copper pipe or threaded pipe in nominal sizes 20mm (1/2”) to63mm (2”)
� BS2580 - This 1/4 turn plugcock is available for use with metric and imperial PE pipe using either compression type outlets or the EBCO Push Fit connection in 25mm (3/4”) and 32mm (1”)
� WIS 4-23-04 - This 1/4 turn or 360° spherical type shut off device is available with either1/2” to 2” BSP female threaded connections or 25mm (3/4”) or 32mm (1”)connections for PE pipe using the EBCO Push Fit connection.
Tyco WaterworksEdison RoadHams Hall Distribution ParkColeshill, BirminghamB46 1AB United KingdomTelephone: +44 (0)1675 437 900Facsimile: +44 (0)1675 437 909e-mail: [email protected]: www.tycowaterworks.com
EBCO Float Valves.qxp 25/06/2007 14:43 Page 2
Mark 1 and 2 for water services
Equilibrium Float Valves
We reserve the right to change the design and specification without notice.
© Tyco 2007 2K (06/07) TEBC/400.2
Equilibrium Float Valves
2
Range - Mark 2 Equilibrium Float Valve - Reduced Bore Seat Size 3/4”� 1”� 11/4”� 11/2”� 2”� 21/2”* 3”* 4”* 6”*
Float Valve internal bore 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 4”Recommended diameter of ball float 41/2” 51/2” 6” 7” 8” 12” 14” 15” 16”
Method of lever/float valve attachment Stud Stud Stud Stud Stud Stud Claw Claw ClawThread size of lever to stud/claw attachment 5/16” 3/8” 3/8” 7/16” 1/2” 9/16” 3/4” 3/4” 7/8”
Length from inlet flange to end of ball 17” 22” 25” 27” 30” 36” 39” 42” 47”Length of lever arm 10” 13” 16” 17” 18” 19” 20” 21” 23”
Length of Screwed inlet (BSP threaded versions only) 11/2” 11/2” 2” 21/4” 21/2” 3” 31/2” 4” 5”Centre line of valve to bottom outlet 1” 11/2” 2” 21/4” 21/2” 3” 31/4” 33/4” 43/4”
Range - Mark 1 Equilibrium Float Valve - Full Bore Seat Size 1/2”� 3/4”* 1”* 11/4”* 11/2”* 2”* 21/2”* 3”* 4”*
Float Valve internal bore 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 4”Recommended diameter of ball float 41/2” 51/2” 6” 7” 8” 12” 14” 15” 16”
Method of lever/float valve attachment Stud Stud Stud Stud Stud Stud Claw Claw ClawThread size of lever to stud/claw attachment 5/16” 3/8” 3/8” 7/16” 1/2” 9/16” 3/4” 3/4” 7/8”
Length from inlet flange to end of ball 17” 22” 25” 27” 30” 36” 39” 42” 47”Length of lever arm 10” 13” 16” 17” 18” 19” 20” 21” 23”
Length of Screwed inlet (BSP threaded versions only) 11/4” 11/2” 11/2” 2” 21/4” 21/2” 3” 31/2” 4”Centre line of valve to bottom outlet 1” 11/2” 2” 21/4” 21/2” 3” 31/4” 33/4” 43/4”
The Mark 1 Equilibrium float valve is available in sizes 1/2” to 4” and is primarily designed for use at pressures of up to 5bar (72psi)� Only available with BSP threaded inlets * Available with BSP threaded inlets or Flanged inlets
The Mark 2 Equilibrium float valve is available in sizes 3/4” to 6” and is primarily designed for use at pressures of up to 10bar (150psi)� Only available with BSP threaded inlets * Available with BSP threaded inlets or Flanged inlets
� To conform with the current UK anti-backsiphonage requirements no provision ismade for the attachment of a silencing pipe to the outlet.
� These valves must be fitted with a copper ball float. Using a lightweight plasticfloat may impair the action of the valve.
� These fittings are designed for the conveyance of cold potable water. Save withthe express written approval of EBCO, no warranty is given that the fittings are suitable for any other purpose.
Notes
These fittings are designed for the conveyance of cold potable water. Save with the express written approval of EBCO, no warranty is given that the fittings are suitable for any other purpose.
Associated Products
The EBCO range of gunmetal stopcocks and plugcocks provide a reliable and robustselection of shut off devices for use with PE, copper or threaded iron pipes. The rangeconsists of three basic types:
� BS5433 - This screwdown type stopcock is available for use with metric and imperial PE pipe using either compression type outlets or the EBCO Push Fit connection, type B copper pipe or threaded pipe in nominal sizes 20mm (1/2”) to63mm (2”)
� BS2580 - This 1/4 turn plugcock is available for use with metric and imperial PE pipe using either compression type outlets or the EBCO Push Fit connection in 25mm (3/4”) and 32mm (1”)
� WIS 4-23-04 - This 1/4 turn or 360° spherical type shut off device is available with either1/2” to 2” BSP female threaded connections or 25mm (3/4”) or 32mm (1”)connections for PE pipe using the EBCO Push Fit connection.
Tyco WaterworksEdison RoadHams Hall Distribution ParkColeshill, BirminghamB46 1AB United KingdomTelephone: +44 (0)1675 437 900Facsimile: +44 (0)1675 437 909e-mail: [email protected]: www.tycowaterworks.com
EBCO Float Valves.qxp 25/06/2007 14:43 Page 2
Range - Mark 1 Equilibrium Float Valve - Full Bore Seat
Range - Mark 2 Equilibrium Float Valve - Reduced Bore
Notes
• ToconformwiththecurrentUKanti-backsiphonage requirements no provision is made for the attachment of a silencing pipe to the outlet.
• Thesevalvesmustbefittedwithacopperballfloat. Using a light weight plastic float may impair the action of the valve.
• Thesefittingsaredesignedfortheconveyanceof cold potable water. Save with the express written approval of EBCO, no warranty is given that the fittings are suitable for any other purpose.
Your Choice in Waterflow Control
TALIS UK Edison Road Hams Hall Distribution Park Coleshill, Birmingham B46 1AB United Kingdom
Tel: +44 (0) 1675 437900 Fax: +44 (0) 1675 437909 Email: [email protected] Web: www.talis-group.com
TALIS is always the number one choice whenever water transport or control is required. TALIS has the best solution for water and energy management, as well as for industry and municipal applications. With a varied range of products we offer comprehensive solutions for the entire water cycle. From hydrants to butterfly valves. From the knife-gate valves to the needle valves. Our experience, innovative technology, global expertise and individual con-sultation process form the basis for developing sustainable solutions for the efficient handling of the vital resource “water”.
Rückgewinnung
Pumpwerk Rohrnetze
Wassergewinnung
Speicher
Bewässerung
Talsperre Aufbereitung
Industrie
Kraftwerk Klärwerk Gas
Rückgewinnung
Pumpwerk Rohrnetze
Wassergewinnung
Speicher
Bewässerung
Talsperre Aufbereitung
Industrie
Kraftwerk Klärwerk Gas
Rückgewinnung
Pumpwerk Rohrnetze
Wassergewinnung
Speicher
Bewässerung
Talsperre Aufbereitung
Industrie
Kraftwerk Klärwerk GasRückgewinnung
Pumpwerk Rohrnetze
Wassergewinnung
Speicher
Bewässerung
Talsperre Aufbereitung
Industrie
Kraftwerk Klärwerk Gas
Rückgewinnung
Pumpwerk Rohrnetze
Wassergewinnung
Speicher
Bewässerung
Talsperre Aufbereitung
Industrie
Kraftwerk Klärwerk GasRückgewinnung
Pumpwerk Rohrnetze
Wassergewinnung
Speicher
Bewässerung
Talsperre Aufbereitung
Industrie
Kraftwerk Klärwerk Gas
Note: Specifications may be changed without notification at any time.Copyright: No copying without express written permission of TALIS.EBCOFLOATVALVES (02/12)