ec-200d its solution
DESCRIPTION
The EC-200D introduces a new way of creating ITS solutions in the urban and regional road infrastructure. EC-200D is the new compact partner of the successful EC-2. The EC-2 platform is well-known for its flexible architecture that makes it possible, not only to make advanced programs for traffic light control on intersections, but also to create additional applications in the field of data acquisition, processing and control of peripheral systems. The new EC-200D brings ITS data applications and services created on the Peek EC-2 traffic light controller, to places where there is need for these additional applications and services, but there is no need for traffic control. Read the examples below.TRANSCRIPT
EC-200D THE URBAN ITS BUILDING BLOCK
Creating a flexible ITS infrastructure
The EC-200D introduces a new way of creating ITS solutions in the urban
and regional road infrastructure. EC-200D is the new compact partner
of the successful EC-2. The EC-2 platform is well-known for its flexible
architecture that makes it possible, not only to make advanced programs
for traffic light control on intersections, but also to create additional
applications in the field of data acquisition, processing and control of
peripheral systems. The new EC-200D brings ITS data applications and
services created on the Peek EC-2 traffic light controller, to places where
there is need for these additional applications and services, but there is no
need for traffic control. Read the examples below.
VIP
The EC-200D makes it possible to further roll-out the successful loop-based
travel time system. While this VIP (Vehicle Inductive Profile) system already
runs on the EC-2 controller with its own loop-detectors (ED316), it can
now be extended to any other roadside location and even installed in third
party controllers.
Dynamic Public Lighting
Dynamic control of public lighting is based on actual traffic intensity and
weather conditions. A system that not only makes traffic safer, but also
safes energy. This application can be installed on EC-2 and now as a stand-
alone option on the EC-200D.
Uniformity of Interfaces
One of the challenges with different ITS roadside equipment is the
integration of different data sources and communication standards. The
EC-200D solves this problem together with the EC-2. Both platforms
run exactly the same programming environment, called EC-X. Every
protocol (OCIT, IVERA, VLOG, Alert+, RSMP) that runs on your EC-2
controller, will run on the EC-200D. The EC-200D accommodates the same
communication options as for the EC-2: 3/4G, SHDSL, WLAN, MDSL. All
drivers that are supported on the EC-2, will be supported by the compact
EC 200D.
EC-200D
� Very compact powerful ITS platform.
� Extends all the specific applications made on an EC-2 traffic controller to places
where no intersection controller is needed, but there is a need for traffic data
processing.
� Applications made on EC-200D can also easily be transferred to EC-2 controllers.
� Offers extensive and detailed data logging (TDC, MV, VLOG).
� Can be connected to the Imtech RMS, Remote Monitoring System.
� Can be placed in a wired and wireless network.
� Is ready to be mounted in existing cabinets as well as separate installations.
� Fully supports the iBox weather station;
� Supports VIP travel time measurement (Vehicle Inductive Profile by ED316
detection).
System
Roadside
Specifications
Dimensions, order number EC-200D/H half 19”rack, 3U 3522 704 73320
EC-200D/B full 19” rack, 3U 3522 704 73310
Weight EC-200D/H 1300 g (rack only)
EC-200D/B: 1600 g (rack only)
CPU ARM9 CPU card
Temperature range -25 … + 75 °C
Humidity 5 … 95% RH
MTBF 97.000 hours (configuration: ARM CPU, PSU 24VDC, ED316, IO1616)
Power supply 230 VAC (with PSU), 24 VDC with external power (in existing cabinet)
Communication Ethernet, USB, serial
Communication options WLAN, MDSL, SHDSL, 3G/4G
Time sync NTP, GPS (NMEA), Glonass, Galileo, DCF77 (limited range)
Configurable items ARM CPU 3522 704 73360
PSU 24 VDC 3522 704 73340
ED316 3522 704 72260
IO1616 3522 704 24370
Both rack options accommodates standard 4 cards of ED316 or IO1616
Software EC-X Environment (Release 1.5.000 or higher)
EC-X NORDIC Environment (Release 2.1.004 or higher)
User Interface MMI (optional LCD menu driven unit)
Web-interface
Certificates CE
Head office Imtech Traffic & Infra
Basicweg 16
NL-3821 BR Amersfoort
P.O. Box 2542
NL-3800 GB Amersfoort
The Netherlands
Tel. +31 33 454 17 77
Fax +31 33 454 17 40
The total solutions provider www.imtech.eu/traffic-infra