ec manufacturer's declaration · procedure is ped sep article 4.3. pressure equipment...

1
Member of th e E LAFL EX Gro up EC MANUFACTURER'S DECLARATION Description of Product: Type: Model Variant Name of Manufacturer: Address: Check Valve 300 Series - NPT I SAE I BSP & ORFS CV304 I CV306 I CV308 Standard & Heavy Duty Oasis Engineering Ltd 129 Birch Ave Tauranga 3110 New Zealand www.OasisNGV.com We hereby declare that the products described above comply with the relevant provisions of the appropriate EC Directives, Harmonised Standards of the European Union and other recognised standards listed below and accordingly carry the required markings. Pressure Equipment Directive: 2014168/EU Compliance procedure is PED SEP Article 4.3. The following Standards are applicable: BS EN 12516-2: 2014 AS/NZS/ISO 9001: 2015 BS EN 10272: 2016 ISO 228-1:2000 BS EN 10204: 2004 ISO 5208: 2015 ASME 1.20.1-2013 (R2018) SAE J1453-1: 2012 SAE J1926-1 SEP2016 Note: The 300 series Check Valve models described above have been manufactured to Sound Engineering Practice (SEP) and therefore carries no GE marking. Evidence of SEP is contained within the Technical File as required by the EC Pressure Equipment Directive 2014/68/EU. Date of Declaration: 23 s1 July 2020 Place of Declaration: Tauranga NZ Date of Issue: 29 th July 2020 Declaration No. NZCE 317-2020 -Andrew Cameron Managing Director Oasis Engineering Ltd NZCE 317:Oasis CPI 2017 rev5 23/07/2020 CEf? !, O~t www.ceproof.com CEproof International (NZ)Ltd Keeper of technical documents in the European Union

Upload: others

Post on 20-Aug-2020

42 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: EC MANUFACTURER'S DECLARATION · procedure is PED SEP Article 4.3. Pressure Equipment Directive: 2014/68/EU The following Standards are applicable: BS 12516-2:2014 AS/NZS/ISO 9001:

Member of the ELAFLEX Group

EC MANUFACTURER'S DECLARATION

Description of Product:

Type:

Model

Variant

Name of Manufacturer:

Address:

Check Valve

300 Series - NPT I SAE I BSP & ORFS

CV304 I CV306 I CV308

Standard & Heavy Duty

Oasis Engineering Ltd

129 Birch Ave Tauranga 3110 New Zealand

www.OasisNGV.com

We hereby declare that the products described above comply with the relevant provisions of the appropriate EC Directives, Harmonised Standards of the European Union and other

recognised standards listed below and accordingly carry the required markings.

Pressure Equipment Directive: 2014168/EU Compliance procedure is PED SEP Article 4.3.

The following Standards are applicable:

BS EN 12516-2: 2014 AS/NZS/ISO 9001: 2015 BS EN 10272: 2016 ISO 228-1:2000 BS EN 10204: 2004

ISO 5208: 2015 ASME 1.20.1-2013 (R2018) SAE J1453-1: 2012 SAE J1926-1 SEP2016

Note: The 300 series Check Valve models described above have been manufactured to Sound Engineering Practice (SEP) and therefore carries no GE marking. Evidence of SEP is

contained within the Technical File as required by the EC Pressure Equipment Directive 2014/68/EU.

Date of Declaration: 23s1 July 2020 Place of Declaration: Tauranga NZ

Date of Issue: 29th July 2020 Declaration No. NZCE 317-2020

-Andrew Cameron Managing Director

Oasis Engineering Ltd

NZCE 317:Oasis CPI 2017 rev5 23/07/2020

CEf?!,O~t www.ceproof.com

CEproof International (NZ)Ltd Keeper of technical documents in the European Union