ec manufacturer's declaration
TRANSCRIPT
Member of the ELAFLEX Group
EC MANUFACTURER'S DECLARATION
Description of Product:
Type:
Name of Manufacturer:
Address:
CNG Dispenser Manifold
100 Series
DM104 - 87/83
Oasis Engineering Ltd
129 Birch Ave Tauranga 3110 New Zealand
www.OasisNGV.com
We hereby declare that the products described above comply with the relevant provisions of the appropriate EC Directives, Harmonised Standards of the European Union and other
recognised standards listed below and accordingly carry the required markings. Compliance procedure is PED SEP Article 4.3.
Pressure Equipment Directive: 2014/68/EU
The following Standards are applicable:
• BS EN 12516-4: 2014+A1:2018 • BS EN 754-2: 2016 • AS/NZS/ISO 9001: 2015 • B5 EN 13445-3: 2014 • BS EN 10272: 2016 • BS EN 10204: 2004 • 8S EN 755-2: 2016 • /SOI/EC 17067: 2013 • SAE J1926/1: 2016
Note: The CNG Dispenser Manifold 100 series described above have been manufactured to Sound Engineering Practice (SEP) and therefore carries no GE marking. Evidence of SEP is
contained within the Technical File as required by the EC Pressure Equipment Directive 2014/68/EU.
Date of Declaration: 2nd February 2021 Place of Declaration: Tauranga NZ
Date of Issue: 8th February 2021 Declaration No. NZCE 320-2020
Andrew Cameron Managing Director
Oasis Engineering Ltd
NZCE 320:Oasis CPI 2020 rev1 27/01/2021
www.ceproof.com
CEproof International (NZ)Ltd Keeper of technical documents in the European Union