echostream integration with ibase and flexibase panels

VERIFIED ELECTRONIC SECURITY Intrusion Access Video Fire www.sonitrol.com Call: 877-SONITROL (877-766-4876) © 2012 Stanley Convergent Security Solutions, Inc. Inovonics ® EchoStream ® Integration with iBase and FlexiBase Panels The iBase and FlexiBase panels integrate with the Inovonics ® EN4200 EchoStream ® Serial Receiver, a security only product that decodes radio frequencies from up to 64 optional wireless alarm point security devices and repeaters. The EN4200 EchoStream ® Serial Receiver connects directly to an iBase or FlexiBase control panel via a serial connection and outputs data to the attached control panel. Based on SonIP/Panel programming, the panel will send any necessary alarms to the SonIP Central Station so that an alarm operator can perform an action based on receiving the event. SONIP SECURITY SOLUTIONS NEW TECHNOLOGY INTEGRATION How Can Sonitrol Help You? As one of the nation’s premier commercial security companies, Sonitrol offers integrated security solutions, featuring our unique veriﬁed audio detection technology. EchoStream ® Housing Dimensions and Weight n 6.38" W x 3.60" H x 1.10" D (16.2cm x 9.14cm x 2.79cm) n 4.7 oz. (139 ml) Power Requirements n 10-14VDC at 100mA Operating Frequency n 902-928 MHz Required Equipment n EN4200 EchoStream ® Serial Receiver Installation Instructions–05854A n 19810005_Rev C iBase Installation.pdf or n 19810022 Rev C FlexiBase Installation.pdf n 19810015 Rev B iBase programming guide.pdf n Minimum 20AWG 4 conductor stranded-tinned copper with PVC insulation no longer than 50ft. rated to 300V at 80°F (26°C) Approvals n AMCX UL 1610, “Central Station Burglar Alarm Units” n APOU UL 1076, “Proprietary Burglar Alarm Units and Systems” n APAW UL 365, “Police Connected Burglary” Alarm Points n 64 optional wireless alarm points n Wireless End Devices alarm status is programmable at the Wireless End Device, and not at the Host panel or Central Station. iBase/FlexiBase Signal Processing The following details the supervision intervals for the wireless devices, repeaters, and the receiver. n Wireless End Devices are marked as down by iBase/FlexiBase after 15 minutes of no contact with the panel. This value is non-adjustable and therefore these devices can not be removed from the installed facilities premises and should be tested after installation to ensure that there is no interference. n Repeaters are marked as down by iBase/FlexiBase after 27 minutes of no contact with the panel. n EN4200 EchoStream ® Serial Receiver is marked as down by iBase/ FlexiBase after 90 seconds of no contact with the panel.

Upload: vanduong

Post on 09-Dec-2016

221 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: EchoStream Integration with iBase and FlexiBase Panels

VERIFIED ELECTRONIC SECURITY Intrusion Access Video Fire

www.sonitrol.comCall: 877-SONITROL (877-766-4876)

Inovonics® EchoStream® Integration with iBase and FlexiBase PanelsThe iBase and FlexiBase panels integrate with the Inovonics® EN4200 EchoStream® Serial Receiver, a security only product that decodes radio frequencies from up to 64 optional wireless alarm point security devices and repeaters. The EN4200 EchoStream® Serial Receiver connects directly to an iBase or FlexiBase control panel via a serial connection and outputs data to the attached control panel. Based on SonIP/Panel programming, the panel will send any necessary alarms to the SonIP Central Station so that an alarm operator can perform an action based on receiving the event.

SONIPSECURITY SOLUTIONS

NEW TECHNOLOGY INTEGRATION

How Can Sonitrol Help You?As one of the nation’s premier commercial security companies, Sonitrol offers integrated security solutions, featuring our unique verified audio detection technology.

EchoStream® Housing Dimensions and Weightn 6.38" W x 3.60" H x 1.10" D

(16.2cm x 9.14cm x 2.79cm)n 4.7 oz. (139 ml)

Power Requirementsn 10-14VDC at 100mA

Operating Frequencyn 902-928 MHz

Required Equipmentn EN4200 EchoStream® Serial Receiver

Installation Instructions–05854An 19810005_Rev C iBase Installation.pdf orn 19810022 Rev C FlexiBase Installation.pdfn 19810015 Rev B iBase programming guide.pdfn Minimum 20AWG 4 conductor stranded-tinned

copper with PVC insulation no longer than 50ft. rated to 300V at 80°F (26°C)

Approvalsn AMCX UL 1610, “Central Station Burglar

Alarm Units”n APOU UL 1076, “Proprietary Burglar Alarm Units

and Systems”n APAW UL 365, “Police Connected Burglary”

Alarm Pointsn 64 optional wireless alarm pointsn Wireless End Devices alarm status is programmable

at the Wireless End Device, and not at the Host panel or Central Station.

iBase/FlexiBase Signal ProcessingThe following details the supervision intervals for the wireless devices, repeaters, and the receiver.nWireless End Devices are marked as down by

iBase/FlexiBase after 15 minutes of no contact with the panel. This value is non-adjustable and therefore these devices can not be removed from the installed facilities premises and should be tested after installation to ensure that there is no interference.

n Repeaters are marked as down by iBase/FlexiBase after 27 minutes of no contact with the panel.

n EN4200 EchoStream® Serial Receiver is marked as down by iBase/ FlexiBase after 90 seconds of no contact with the panel.