The e series clip with its unique

geometric design offers a lightweight, low

cost rail fastening. Spring and torsion

work together to provide a high clamping

force, excellent resistance to rail rollover

and longitudinal restraint.

The e clip is driven parallel to the rail and

is easily installed, manually with standard

track tools, or with mechanical equipment.

'e' CLIP

In the interests of product improvement, Pandrol reserves the right to change the specifications contained herein at any time without prior notice.6/10 .5M

SPECIFICATIONS:

Made from high spring steel alloy

Bar diameter: 20mm

Approximate shipping weigh: 1.7 lbs.

Normally packed 50 to a bag

P/N ECL-2055 (right hand)

P/N ECL-2056 (left hand)

Clip e 2055

Bar Diameter 20 mm

Nominal toe load 2,750 lbs

Working deflection 7/16

Nominal Rail Seat

Clamping Force 5,500 lbs

Surface Area in

contact with insulator

or rail .82 sq. in.

Pandrol Canada Limited6910 34th StreetEdmonton, Alberta T6B 2X2, Canada

(780) 413-4281

www.pandrolcanada.ca

Pandrol USA, LP501 Sharptown RoadP.O. Box 367Bridgeport, NJ 08014(856) 467-3227(800) 221-CLIP

www.pandrolusa.com

2 1/4"

Toe

CenterLeg

Front Arch

Rear Arch

Heel4 3/16"

3000

2000

1000

CLIP

TO

E L

OA

D

CLIP TOE DEFLECTION

0

e 2

055

2750 lbs.

1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

The e clip design utilizes the toe to bear on the rail

base. The toe is flattened to provide a large bearing

area on the rail or insulator.

Chamfered center leg allows easy setting and driving.