ecy-csc ds 24 en - messung bacd · configuration, programming, commissioning, and servicing. £...

ECLYPSE™ Connected SystemController

OverviewThe ECLYPSE Connected System Controller(ECY-CSC) is a modular and scalable platformused to control a wide range of HVACapplications. It supports multi-protocolcommunications, including BACnet/IP, and is alisted BACnet Building Controller (B-BC).The ECY-CSC consists of a control, automationand connectivity server, power supply, and I/Oextension modules.This programmable controller providesadvanced functionality, such as customizablecontrol logic, Web-based design andvisualization interface (ENVYSION embedded),logging, alarming, and scheduling.

ApplicationsThe ECY-CSC is typically used as:£ A controller for medium/large sized Air

Handling Units (AHU), central plant, lighting,power monitoring, and other applications.

£ Small building server and equipmentcontroller with embedded ENVYSION. Forexample, it can be used to control and servea boiler room.

Features & BenefitsConnectivityThe different types of connections supported bythe ECY-CSC are as follows:

IP wired connectionInternal switch with two Ethernet ports allowsthe controllers to be wired in a star or daisy-chain topology. With a daisy-chain topology:£ Fewer wire runs to a centralized switch are

required, thereby achieving installation andcost reduction.

£ A laptop can be connected to the secondEthernet port for direct programming,configuration, and commissioning using EC-gfxProgram or ENVYSION.

IP wireless (Wi-Fi) connection£ Wi-Fi Client - Connection to the building’s

existing Wi-Fi network or to anothercontroller’s Wi-Fi Hotspot or Access Point.

£ Wi-Fi Access Point - extending the building’swired IP network to your Wi-Fi Clientdevices.

D a t a s h e e t

2 / 18 ECLYPSE™ Connected System Controller

£ Wi-Fi Hotspot - your own wireless areanetwork, for wireless communicationbetween the controllers, or with a mobiledevice or laptop for configuration,commissioning and servicing.

Both IP wired and wireless (Wi-Fi) connectionThe availability of both Ethernet ports and USBports for the Wi-Fi Adapter, allows forsimultaneous wired IP and Wi-Fi communicationon the same controller, which means you canchoose and combine these connection methods.For example, Wi-Fi can be used between twocontrollers to jump a large atrium.

Connect from anywhereControl technicians, facility managers,occupants, and others can easily connect to thesystem, on-site or off-site, using the differentavailable tools:£ ENVYSION to create and view the graphical

interface£ EC-gfxProgram to create custom control

sequences£ myDC Control to view, edit, and configure

system operating parameters

IP Communication£ Increased speed and improved handling of

numerous trend logs that enableapplications, such as advanced analyticsthat require a large amount of data.

£ Experience faster response and save timewhen programming, configuring, creatingand viewing graphics, and upgrading yoursystem.

£ Control technicians can connect theECLYPSE Wi-Fi Adapter to the ECY-CSCthereby creating a Wi-Fi Hotspot network.The control technician can then connectwirelessly to the system using a mobiledevice or laptop, for faster, easier systemconfiguration, programming, commissioning,and servicing.

£ Hostname management allows the controllerto be addressed by a nickname to facilitatenetwork management.

Open to Web ServicesWith the RESTful API, the ECY-CSC’s data canbe accessed from different applications, such asenergy dashboards, analytics tools, and mobileapplications. The RESTful API documentationexplains the implementation protocol for thisinterface.

HTML5 Visual InterfaceThe ECY-CSC comes embedded with bothENVYSION Studio and Viewer, andxpressENVYSION.

ENVYSION – Web-based graphic design and vi-sualization interfaceENVYSION is a web-based graphic design andvisualization interface used to create and deliverinteractive graphical user interfaces and anoptimal user experience for building owners andfacility managers to better manage facility data.

ProgrammabilitySupports Distech Controls’ EC-gfxProgram,which makes Building Automation System(BAS) programming effortless, by allowing youto visually assemble building blocks to create acustom control sequence for any HVAC ,lighting, or building automation application.

Batch EC-gfxProgram Projects andFirmware DownloadEC-gfxProgram projects can be downloaded inbatch to multiple controllers, for greater timesavings. Batch firmware update can also beperformed on multiple controllers.

Simplified Network CommissioningThe XpressNetwork Utility saves you time andexpense by giving you increased control overmultiple ECLYPSE controllers through devicediscovery and batch operations such asconfiguring, programming, and updating multipleECLYPSE controllers on the network.

ECLYPSE™ Connected System Controller 3 / 18

In addition, with the embedded step by stepCommissioning Wizard, all configurationoperations can be setup and applied in one go.Increase productivity using the xpressNetworkCompanion mobile app, making it easier toidentify and locate a controller on the network.Use the QR Code marked on ECLYPSEcontrollers to easily collect key controller dataand to facilitate its network integration withxpressNetwork Utility.

Scalable and ModularThe ECY-CSC is sized to cost-effectively meetthe requirements of any HVAC application fromsmall to medium to large systems. The mostcapable Connected System Controller modelcan be expanded to support up to 20 input/output (I/O) modules (up to 320 I/Os) whilebeing able to adapt to new requirements as theneed arises.A connecting cable is used to connectsuccessive rows of modules within a controls’cabinet to provide power and communication.

ECY-RS485 communication moduleAn ECY-RS485 communication module addstwo extra RS-485 trunks to support moreBACnet MS/TP and Modbus RTU devices.

ECY-MBUS communication moduleAn ECY-MBUS communication module has oneM-Bus port for meter integration, thuseliminating the need for a third-party gateway(from M-Bus to BACnet/IP).

BACnet/IP DeviceThe ECY-CSC is BTL-listed as a BACnetBuilding Controller (B-BC) and is certified WSPB-BC (Europe) and AMEV AS-A & AS-B(German-speaking countries). It supportsBACnet/IP for faster communication incomparison to the traditional twisted paircommunication bus.

Multi-Protocol SupportThe ECY-CSC supports a range ofcommunication protocols such as BACnet MS/TP, Modbus RTU, and Modbus TCP.BACnet MS/TP and Modbus RTUcommunications are made by connectingdirectly to separate RS-485 ports. The ECY-CSC integrates up to three RS-485 ports whenequipped with one ECY-RS485 extensionmodule allowing the controller to support morethan one trunk or communication protocol at atime.

MS/TP to IP routing

Integrate full MS/TP trunks into a supervisorysystem like the EC-NetAX Supervisor, without theneed for other hardware components such asan external BACnet MS/TP to IP router.

Modbus RTU and TCPModbus RTU and TCP communication can beused to integrate a wide variety of Modbusdevices such as power and water meters,Variable Frequency Drives, air flow sensors,and more, without the need for additionalhardware such as a gateway.

FIPS 140-2 Level 1 CompliantFIPS 140-2 Level 1 compliance provides anenhanced level of security to protect data thecontroller is collecting and sharing making itsuitable for use in the most sensitiveenvironments.

Weather ForecastThe weather forecast is directly available fromthe internet to be shown on a connected ECx-Display or to be used by the controller’s code.

Smart Room Control SupportThe Smart Room Control solution is an end-to-end system for the control of HVAC equipment,lighting, and shades/sunblinds, achieving thehighest levels of comfort for occupants whilecutting costs from installation time and wiring/material requirements to energy consumption.This solution combines:£ Lighting and shade/sunblind expansion

modules to control lights (on/off or dimming)and shades/sunblinds (up/down and anglerotation).

£ Multi-sensor combining motion andluminosity (Lux) sensors and an Infraredreceiver that works with a convenient remotecontrol.

£ The ECLYPSE platform is compatible withDistech Controls line of Bluetooth® lowenergy technology enabled devices (AllureUNITOUCH™ and EC-Multi-Sensor-BLE)and mobile application providing state-of-the-art occupant management.

£ Allure™ Series Communicating roomsensors for increased occupant comfortsettings using integrated sensors fortemperature, humidity, CO2, and motion.


Allure™ Series Communicating Sensor SupportThese controllers work with a wide range ofsensors, such as the Allure SeriesCommunicating Sensors that are designed toprovide intelligent sensing and control devicesfor increased user experience and energyefficiency.£ Allure EC-Smart-Vue£ Allure EC-Smart-Comfort£ Allure EC-Smart-Air£ Allure UNITOUCH

MobilityThe controller can be remotely accessed toprogram, configure, or maintain the installationthus reducing costs associated with on-sitevisits. Through a mobile device or PC, a rangeof tasks can be performed using the followingfree-to-use tools and interfaces:£ ENVYSION web-based graphic design and

visualization interface£ EC-gfxProgram graphical programming

interface£ myDC Control mobile application

Hand/Off/Auto Switches andPotentiometersThe front assembly of Hand/Off/Auto (HOA)equipped I/O models allow users to override thecontrol outputs for commissioning andmaintenance purposes.Universal outputs have potentiometers providingmanual analog signal and output control tooverride voltage or current signal.

High-Efficiency DesignThe power supply uses the latest high-efficiencyswitch-mode circuitry to make more poweravailable to operate additional modules and forcooler operation.

Hot-Swappable Tool-Less Design andUnique Latching MechanismThe I/O modules are hot-swappable forreplacement without interrupting power andcommunications to other modules.The front assembly of I/O modules separatefrom the wiring base by pushing the two latchesup to unlock a module’s front assembly and thenopening and pulling the hinged gull-wing covers.The latch design locks the front assembly to thewiring base.The hinged gull-wing design protects and coverthe stacked dual row I/O terminal strips.

Ease of InstallationThe ECY-CSC modules are plug & play devices.They are equipped with HD-15 connectors thattransmits power and communications to the nextmodule for fast and easy assembly.

I/O Status LEDsThe status LEDs on the I/O modules allows theuser to confirm the status of the inputs/outputsand facilitate commissioning andtroubleshooting.

Auto-AddressingThe auto-addressing feature eliminates theneed to manually assign an address to each I/Omodule therefore reducing installation andconfiguration time.

Digital Inputs Up to 120HzThe ECY-16DI module supports pulsed signalsup to 120Hz for equipment status monitoringand alarm point monitoring, commonly used inenergy metering applications.


Color-Coded, Rising Cage TerminalsTerminal blocks are uniquely identified andcolor-coded for clarity and to prevent wiringmistakes. The rising cage clamp terminal blockconnectors offer a more robust and secure wireconnection, designed to withstand activity andvibrations.

Robust ProtectionThe I/O modules are protected against mis-wiring and faults to prevent damage caused byincorrect wiring or other mishaps.The power supply module contains over-voltageand over-current output protection to protect theelectronics in unstable power supply conditionsand against mis-wiring.

Alarms, Trend Log, Schedule SupportEmbedded alarms, trend log and schedulesupport allows for fully distributed data and logicproviding a more robust system. Embeddedtrend logs simplify system troubleshooting whencompared to a centralized system.

Email Notifications ServiceTechnicians & facility managers can receiveautomatic email notifications for system statusand alarms to ensure faster system servicingand response time. Email notification text canbe customized to provide pertinent informationabout the issue at hand.


Model SelectionThe ECLYPSE Connected System Controller consists of a power supply, a control, automation andconnectivity server, I/O extension modules, and communication modules to create a controllertailored to its application. The different models for each are shown in the tables below.

Power SupplyA power supply module must be added after each HD15 cable (see Accessories below).

ECY-PS24 24VAC/VDC power supply module for the ECLYPSE Connected SystemController.

ECY-PS100-240 100 to 240VAC power supply module for the ECLYPSE ConnectedSystem Controller.

Control, Automation and Connectivity ServersConnected System Controller for medium/large sized AHU and plant applications and small buildingserver/controller applications.

Model WithEmbeddedENVYSION

Application MaximumNumber ofPointsSupported

BACnet MS/TPto IP RoutingSupport –MaximumNumber ofBACnet MS/TPDevices

MaximumNumber ofModbusDevices (RTUor TCP)

ECY-S1000-28 Small sizeequipment such

as a large rooftopunit or a small

AHU.

28 No1 3ECY-S1000E-28ECY-S1000-28-MS 28 Yes2 3ECY-S1000E-28-MSECY-S1000-48 Medium size

equipment suchas an AHU or asmall size plant

room.

48 No1 10ECY-S1000E-48ECY-S1000-48-MS 48 Yes2 10ECY-S1000E-48-MSECY-S1000 Large size

equipment suchas large plant

rooms and largedata centers.

3204 Yes2 963

ECY-S1000E

1. Upgrade and enable the functionality of your ECLYPSE controller’s RS-485 ports with our capacity-based upgrade to ECYS1000-48MS.2. Up to 50 BACnet MS/TP devices recommended on each RS-485 port.3. Up to 32 Modbus RTU devices recommended on each RS-485 port. The maximum amount of Modbus TCP devices is limited to available system resources (too

many devices can affect system performance).4. The ECY-S1000 models support a maximum of 320 points OR up to a maximum of 20 IO modules.


I/O Modules SelectionInputs Outputs

Basi

c Po

wer

Con

sum

ptio

n2 ,WQ

uant

ity

Digital Analog

18VD

C P

ower

Sup

ply

Qua

ntity

Digital Analog

HO

A

Con

tact

Cou

nter

120H

z Pu

lse

Cou

ntin

g0

to 1

0VD

C0

to 5

VDC

0 to

20m

AR

esis

tanc

eTh

erm

isto

r

0-27

7VAC

/ 0-

30VD

CFo

rm-C

, 10A

24VA

C T

riac,

0.5

A0

or 1

2VD

CPW

MFl

oatin

g0

to 1

0VD

C1

0 to

20m

A1

ECY-8UI 8 0.94ECY-16DI 16 0.94ECY-6UO 6 UO1

UO2UO3

0.94

ECY-6UO-HOA 6 UO1UO2UO3

0.94

ECY-8DOR 8 0.94ECY-8DOR-HOA 8 0.94ECY-4UI4UO 4 4 UO1

UO2UO3

0.94

ECY-4UI4UO-HOA 4 4 UO1UO2UO3

0.94

ECY-8UI6UO 8 6 UO1UO2UO3

0.94

ECY-8UI6UO-HOA 8 6 UO1UO2UO3

0.94

ECY-8UI6DOT 8 6 0.94ECY-8UI6DOT-HOA 8 6 0.941. 0 to 10VDC is available on UO1 to UO6. 0 to 20 mA is available on UO1, UO2, and UO3; this option is individually selected through an on-board DIP switch

setting.2. External loads excluded. See the ECLYPSE Selection Tool to calculate the number of Input/Output Extension Modules that can operate with a power supply.

Communication Modules SelectionCommunications Module DescriptionECY-RS485 ECLYPSE Communication module with two RS-485 ports for Modbus

RTU or BACnet MS/TP.ECY-MBUS ECLYPSE Communication module with one M-Bus port, supporting up to

20 M-Bus meters. Upgrade license for the ECY-MBUS communicationmodule to support up to 60 M-Bus meters.

AccessoriesECLYPSE HD15 Cable 6ft (1.8m) cable for Connected System Controller multiple-row panel

installations. An HD15 cable must always be followed by a power supplymodule. For more information, refer to the Hardware Installation Guide.

ECLYPSE Wi-Fi Adapter Wi-Fi Adapter for ECLYPSE Connected Controllers.


Product SpecificationsPower Supply (ECY-PS24)Power Supply InputVoltage Range 24VAC/DC; ±15%; Class 2Power Consumption 60VAFrequency Range 50 to 60HzOvercurrent Protection Field replaceable fuseFuse Type 4A, fast-acting, 5 × 20mm (GMA-4A)

Power Supply OutputDC Voltage 18VDC regulatedRated Current Range 0 to 1.6ARated Power 30W1

1. The total power consumption of all modules connected to the right of this power supply, and up to the next connected power supply, including any connectedloads, must be less than this value. A separate transformer rated at 60VA minimum and 100VA maximum must be used for each ECY-PS24 power supply for it tooperate at full capacity.

HardwarePower Distribution Direction Powered modules are connected to the rightBackplane Bus Pass-through connection for data and control signalsStatus Indicator Green LED: power status

MechanicalDimensions (H × W × D) 4.74 × 2.85 × 2.31" (120.31 × 72.38 × 58.56mm)

4.74" 120.31 3.18" 80.82

18.390.72

21.130.83

2.31" 58.5672.38

Inches Millimeters

0.01" 0.40Inter-Connection Gap:

2.61" 66.190.06" 1.44

0.17" 4.24 2.85"

5.20" 132.00

Front BackProfile

Shipping weight 0.75lbs (0.34kg)Mounting DIN rail or screw mountingEnclosure Material1 FR/ABSEnclosure Rating Plastic housing, UL94-V0 flammability ratingPlenum rating per UL19951. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE)

directive


EnvironmentalOperating Temperature 32 to 122°F (0 to 50°C)Storage Temperature -22 to 158°F (-30 to 70°C)Relative Humidity 0 to 90% non-condensingIngress Protection Rating IP20Nema Rating 1

Standards and RegulationsCE:£ Emission EN61000-6-3: 2007; A1:2011; Generic standards for residential,

commercial and light-industrial environments£ Immunity EN61000-6-1: 2007; Generic standards for residential,

commercial and light-industrial environmentsFCC This device complies with FCC rules part 15, subpart B, class BUL Listed (CDN & US) UL916 Energy management equipment

Power Supply (ECY-PS100-240)Power Supply InputVoltage Range 100 to 240 VAC Universal; +10%/-15%Input Current 400mA typicalFrequency Range 50 to 60HzStandby Power consumption <0.5WOvercurrent Protection Field replaceable fuseFuse Type 2.5A, Fast-acting, high-breaking, 250VAC, 5 × 20mm (TF2.5AH250V, IEC60127-2)

Power Supply OutputDC Voltage 18VDC regulatedRated Current Range 0 to 2ARated Power 40W1

1. The total power consumption of all modules connected to the right of this power supply, and up to the next connected power supply, including any connectedloads, must be less than this value.

HardwarePower Distribution Direction Powered modules are connected to the rightBackplane Bus Pass-through connection for data and control signalsStatus Indicator Green LED: power status



3.18" 80.82

18.390.72

21.130.83

2.31" 58.56

0.06" 1.44BackProfile

103.654.08"

5.24 133.03

4.74" 120.31

0.44" 11.13

3.83" 97.33Front

0.01" 0.40Inter-Connection Gap:

Inches Millimeters

Shipping weight 0.71lbs (0.32kg)Mounting DIN rail or screw mounting

Refer to Hardware Installation Guide for more informationEnclosure Material1 FR/ABSEnclosure Rating Plastic housing, UL94-5VB flammability rating1. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE)

directive

EnvironmentalOperating Temperature 32 to 122°F (0 to 50°C)Storage Temperature -22 to 158°F (-30 to 70°C)Relative Humidity 0 to 90% non-condensingAltitude <6562ft (2000m)Pollution Degree 2Ingress Protection Rating IP20(must be mounted in a protective enclosure to conform with electrical installation standards)Overvoltage Category II - 2.5 kVElectrical Protection DC output is Separated Extra-Low Voltage (SELV);

SELV is implemented through reinforced insulation

Standards and RegulationsCE:£ Electrical Safety EN 60730-1 : 2011 - Automatic electrical controls for household

and similar use - Part 1: General requirements£ Emission EN61000-6-3: 2007; A1:2011; Generic standards for residential,


commercial and light-industrial environmentsUL Listed (CDN & US) UL 61010-1 Safety Requirements For Electrical Equipment

For Measurement, Control, And Laboratory Use - Part 1: General Requirements - Edition 2 - Revision Date 2008/10/28

FCC This device complies with FCC rules part 15, subpart B, class B


Control, Automation and Connectivity Server (ECY-S1000)Power Supply InputVoltage 18VDCPower Consumption 8.9W; external loads excluded

CommunicationsEthernet Connection Speed 10/100 Mbps£ Addressing IPv4 or HostnameBACnet Profile BACnet Building Controller (B-BC)), AMEV AS-A and AS-B (pending)BACnet Listing BTL, WSP B-BCBACnet Interconnectivity BBMD forwarding capabilities

BACnet/IP to BACnet MS/TP routingBACnet Transport Layer IP & MS/TP (optional)Web Server Protocol HTML5Web Server Application Interface REST APISupported BACnet MS/TP and Modbus RTU and TCP Connectivity:£ BACnet MS/TP or Modbus RTU 1 × RS-485 serial communications ports

Each RS-485 port supports one communication protocol at a time£ RS-485 Wiring 1-pair + Common/shield£ RS-485 EOL Resistor Built-in£ RS-485 Baud Rates 9600, 19 200, 38 400, or 76 800 bps£ RS-485 Addressing Controller’s Web Configuration Interface£ Modbus TCP Devices must be on the same subnetSupported Wireless Connectivity:£ Wireless Adapter Optional, USB Port Connection£ Wi-Fi Communication Protocol IEEE 802.11b/g/n and 802.11s£ Wi-Fi Network Types Client, Access Point, Hotspot

Supported Smart Room Control Components1

Maximum number of standard devices supported per controller combined 12£ Allure EC-Smart-Vue Series 122

£ Allure EC-Smart-Comfort Series 6£ Allure EC-Smart-Air Series 62

£ EC-Multi Sensor 4£ ECx-Light-4 / ECx-Light-4D / ECx-Light-DALI 4£ ECx-Blind-4 / ECx-Blind-4LV 4Maximum number of Bluetooth low energy devices per controller combined 6£ Allure UNITOUCH 2£ EC-Multi-Sensor-BLE 4

A mixed architecture with standard room devices and Bluetooth low energy enableddevices is not recommended.

1. For more details about supported quantities, see the ECLYPSE Selection Tool.xlsm spreadsheet file available for download from SmartSource.2. A controller can support a maximum of 2 Allure sensor models equipped with a CO2 sensor. Any remaining connected sensors must be without a CO2 sensor.


HardwareProcessor Sitara ARM processorCPU Speed 1GHzMemory 4GB Non-volatile Flash (applications & storage)

512MB RAMReal Time Clock (RTC) Real Time Clock with rechargeable battery

Supports SNTP network time synchronizationRTC Battery 20 hours charge time, 20 days discharge time

Up to 500 charge / discharge cyclesCryptographic Module FIPS 140-2 Level 1 CompliantCommunications Ports:£ Ethernet 2 switched RJ-45 Ethernet ports

Supported Protocols BACnet/IP, Modbus TCP, NTP, and REST£ USB Connections 2 × USB 2.0 Ports

1 × Micro-USB 2.0 Ports£ RS-485 Serial Communications Screw terminals

Supported Protocols BACnet MS/TP or Modbus RTU£ Subnet RJ-45Status Indicators Green LED: Power status, Subnet TX, RS-485 TX, and Ethernet Traffic

Orange LED: Controller status, Subnet RX, RS-485 RX, and Ethernet Speed


3.18" 80.82

18.540.73

21.080.83

3.33" 84.47

0.4" 1.092.31" 58.563.57" 90.67

Inches Millimeters

Inter-Connection Gap: 0.01" 0.40

5.13" 130.29

0.06" 1.44

4.74" 120.31

0.39" 9.98 Front BackProfile

Shipping weight 0.85lbs (0.39kg)Mounting DIN rail or screw mountingEnclosure Material FR/ABSEnclosure Rating1 Plastic housing, UL94-V0 flammability rating

Plenum rating per UL19951. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE)

directive

EnvironmentalOperating Temperature 32 to 122°F (0 to 50°C)


Storage Temperature -22 to 158°F (-30 to 70°C)Relative Humidity 0 to 90% non-condensingIngress Protection Rating IP20Nema Rating 1

Standards and RegulationsCE:£ Emission EN61000-6-3: 2007+A1:2011; Generic standards for residential,



I/O ModulesPower Supply InputVoltage 18VDCPower Consumption Calculate power supply requirements with the ECLYPSE Selection Tool

HardwareStatus Indicator Green LEDs: inputs and outputs

For ECY-8UI, ECY-16DI, ECY-6UO, ECY-6UO-HOA, ECY-4UI4UO, ECY-4UI4UO-HOA, ECY-8UI6UO, ECY-8UI6UO-HOA, ECY-8UI6DOT, & ECY-8UI6DOT-HOAModels:


2.95" 74.99

4.74" 120.31

3.20" 81.17 2.31" 58.56

3.18" 80.82

18.540.73

21.080.83

Inches Millimeters


Front BackProfile0.06" 1.44

4.80" 121.75

Shipping weight 0.85lbs (0.39kg)Mounting DIN rail or screw mountingHot-swappable Yes


Enclosure Material FR/ABSEnclosure Rating1 Plastic housing, UL94-V0 flammability rating; Plenum rating per UL19951. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE)

directive

EnvironmentalOperating Temperature 32 to 122°F (0 to 50°C)Storage Temperature -22 to 158°F (-30 to 70°C)Relative Humidity 0 to 90% non-condensingIngress Protection Rating IP20 in accordance with IEC 60537Nema Rating 1

Standards and RegulationsCE:£ Emission EN61000-6-3: 2007; A1:2011; Generic standards for residential,



I/O Modules - Universal Inputs (UI)GeneralInput Type Universal; software configurableCurrent Input Option Selection DIP switchInput Resolution 16-bit analog to digital converterPower Supply Output 18VDC; 20mA maximum per 0 to 20 mA input

ContactType Dry contact

CounterType Dry contactMaximum Frequency 1Hz maximum,Minimum Duty Cycle 500milliseconds On / 500milliseconds Off

0 to 10VDCRange 0 to 10VDC (40kΩ input impedance)

0 to 5VDCRange 0 to 5VDC (high input impedance)

0 to 20mARange 0 to 20mA

249Ω DIP-switch configurable internal resistor


Resistance/ThermistorRange 0 to 350 KΩSupported Thermistor Types Any that operate in this rangePre-configured Temperature Sensor Types:£ Thermistor 10KΩ Type 2, 3 (10KΩ @ 77ºF; 25ºC)£ Platinum Pt1000 (1KΩ @ 32ºF; 0ºC)£ Nickel RTD Ni1000 (1KΩ @ 32ºF; 0ºC)

RTD Ni1000 (1KΩ @ 69.8ºF; 21ºC)

I/O Modules - Digital Inputs (DI)GeneralInput Type Dry contact or Open-CollectorLow Threshold < 2.5VHigh Threshold > 3.0V

Pulse/CounterPulse Input S0 output compatibleMaximum Frequency 120HzMinimum Duty Cycle 4.167milliseconds On / 4.167milliseconds Off

I/O Modules - Universal Outputs (UO)GeneralOutput Type Universal; software configurableOutput Resolution 10-bit digital to analog ConverterOutput Protection Built-in snubbing diode to protect against back-EMF,

for example when used with a 12VDC relayLoad Resistance Minimum 200Ω for 0 to 10VDC and 0 to 12VDC outputs

Maximum 500Ω for 0 to 20mA outputAuto-reset Fuse 60mA @ 140ºF; 60ºC

0 or 12VDC (On/Off)Range 0 or 12VDC

PWMRange Adjustable period from 2 to 65seconds

FloatingMinimum Pulse On/Off Time 500millisecondsDrive Time Period Adjustable

0 to 10VDCRange 0 to 10VDC linear

0 to 20mARange 0 to 20mA


Current Source 20mA maximum per 0 to 20 mA outputPorts UO1, UO2, and UO3 only DIP switch

HOAHand-Off-Auto switch When equipped

Supervision allows control logic to read the current HOA switch and potentiometer settings

Threshold ConfigurablePotentiometer Voltage Range 0 to 12VDC

I/O Modules - Digital Output (DOT)GeneralOutput Type 24VAC Triac; software configurableMaximum Current 0.5A continuous

1A @ 15% duty cycle for a 10 minute periodPower Source External power supply

0 or 24VAC (On/Off)Range 0 or 24VAC

PWMRange Adjustable period from 2 to 65seconds

FloatingMinimum Pulse On/Off Time 500millisecondsDrive Time Period Adjustable


Supervision allows control logic to read the current HOA switch setting

I/O Modules - Digital Output (DOR)For ECY-8DOR & ECY-8DOR-HOA Models:GeneralOutput Type Relay contactRelay Type Form CPower Source Dry contact (external power supply)Operating Voltage 0 to 277VAC or 0-30VDC ±10%, see HIG for mounting specifications

Maximum Current£ Resistive Load 10A£ Inductive Load 6A£ Motor Load 3AProtection Outputs must be protected with max 10 A external circuit breaker


DigitalRange On/Off


Supervision allows control logic to read the current HOA switch setting


4.74" 120.31

2.31" 58.56

Front Profile

O6O3O1 O4 O7 O8O5O2

MAN

AUTO

OFF


5.15" 130.07

4.94" 125.32

Back

3.18" 80.82

18.540.73

21.080.83

Inches Millimeters0.06" 1.44

4.8" 121.75

Shipping weight 0.75lbs (0.34kg)Mounting DIN rail or screw mountingHot-swappable Yes (once high voltages have been removed)Enclosure Material FR/ABSEnclosure Rating1 Plastic housing, UL94-5VB flammability rating1. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE)

directive

EnvironmentalOperating Temperature 32 to 122°F (0 to 50°C)Storage Temperature -22 to 158°F (-30 to 70°C)Relative Humidity 0 to 90% non-condensingAltitude <6562ft (2000m)Pollution Degree 2Ingress Protection Rating IP20

(must be mounted in a protective enclosure to conform with electrical installation standards)Overvoltage Category II - 2.5 kV

Standards and RegulationsCE:£ Electrical Safety EN 60730-1 : 2011 - Automatic electrical controls for household

and similar use - Part 1: General requirements£ Emission EN61000-6-3: 2007; A1:2011; Generic standards for residential,


commercial and light-industrial environments

18 / 18 ECY-CSC_DS_24_EN

UL Listed (CDN & US) UL 61010-1 Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 1:

General Requirements - Edition 2 - Revision Date 2008/10/28FCC This device complies with FCC rules part 15, subpart B, class B

Specifications subject to change without notice.ECLYPSE, Distech Controls, the Distech Controls logo, EC-Net, Allure, and Allure UNITOUCH are trademarks of Distech Controls Inc. BACnet is a registered trade-mark of ASHRAE; BTL is a registered trademark of the BACnet Manufacturers Association. The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks is under license. All other trademarks are property of their respective owners.©, Distech Controls Inc., 2015 - 2018. All rights reserved.

Global Head Office - 4205 place de Java, Brossard, QC, Canada, J4Y 0C4 - EU Head Office - ZAC de Sacuny, 558 avenue Marcel Mérieux, 69530 Brignais, France

ecy-csc ds 24 en - messung bacd · configuration, programming, commissioning, and servicing. £...

Documents