edge.rit.eduedge.rit.edu/content/p15661/public/test plans/word do…  · web viewp15661 –...

3
P15661 – Friction Tester: Reciprocating Base T19 - System Size Date Completed: ____4/9/2015________________________ _ Performed By: ____Chris Karamanos ______________________ Objective: The objective of this test is to show that our friction tester meets the size requirements from the PRP. Engineering Requirement: S1 S1- System not to large Materials Complete Friction tester Tape measure Procedure: 1) Measure the length and width of the system 2) Check measurements against engineering requirement Data Sheet: Length: 12.5” Width: 24” Height: 12.6” Sketch:

Upload: others

Post on 06-May-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: edge.rit.eduedge.rit.edu/content/P15661/public/Test Plans/Word Do…  · Web viewP15661 – Friction Tester: Reciprocating Base. T19 - System Size. Date Completed: ____4/9/2015_____

P15661 – Friction Tester: Reciprocating Base

T19 - System Size

Date Completed: ____4/9/2015________________________ _

Performed By: ____Chris Karamanos______________________

Objective:

The objective of this test is to show that our friction tester meets the size requirements from the PRP.

Engineering Requirement: S1

S1- System not to large

Materials

Complete Friction tester Tape measure

Procedure:

1) Measure the length and width of the system2) Check measurements against engineering requirement

Data Sheet:

Length: 12.5”

Width: 24”

Height: 12.6”

Sketch:

Page 2: edge.rit.eduedge.rit.edu/content/P15661/public/Test Plans/Word Do…  · Web viewP15661 – Friction Tester: Reciprocating Base. T19 - System Size. Date Completed: ____4/9/2015_____

P15661 – Friction Tester: Reciprocating Base

Height

Length

Page 3: edge.rit.eduedge.rit.edu/content/P15661/public/Test Plans/Word Do…  · Web viewP15661 – Friction Tester: Reciprocating Base. T19 - System Size. Date Completed: ____4/9/2015_____

P15661 – Friction Tester: Reciprocating Base

Width