edison high bay ii
TRANSCRIPT
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 2
Table of Contents
General Information ........................................................................................................................................................... 3
Introduction .............................................................................................................................................................. 3
Product Nomenclature ......................................................................................................................................... 3
Dimensions ............................................................................................................................................................................ 4
Absolute Maximum Ratings ............................................................................................................................................ 5
Speci%cations ........................................................................................................................................................................ 5
Illuminance Speci%cations .............................................................................................................................................. 6
Light Patterns ........................................................................................................................................................................ 7
Applications .......................................................................................................................................................................... 8
Environmentally Friendly ...............................................................................................................................................10
Package Information ........................................................................................................................................................11
Installation Information ..................................................................................................................................................12
List of the Modi%cations .................................................................................................................................................13
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 3
High Bay II lighting is typically used in industrial applications. They have the same features as High
Bay II lighting but with a di&erent sized enclosed re$ector. Edison Opto provides a better lighting
solution of light in low/high ceiling applications.
The appearance of Edison High Bay II is as similar as traditional High Bay II lighting but it saves more
energy and has lower light depreciation rates to decrease both energy and maintenance cost.
Without complicated installation and too much limited condition, Edison High Bay II provides a
great lighting solution for industrial applications.
Introduction
Product Nomenclature
General Information
The following table describes the available colors, and wattage.
Table 1. High Bay II nomenclature.
E B F 1 W - 1 2 0 0X1 X2 X3 X4 X5 X6 X7
X1
Product
X2
Module
X3
Re$ector
X4
Color
X5
Watt
Code Type Code Type Code Type Code Type Code Type
E Edison BFBay with Fin
heatsink0 No Cover W Cool White 12 120W
1 AL H Neutral White
2 PC X Warm White
X6
Field Angle
X7
Serial Number
Code Type Code Type
0 90o
0 Driver external
1 40o
1 Driver Internal
2 60o
3 UL Only
3 120o
4 140o
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 4
Ø 153
Ø 360
245
345
Dimensions
High Bay II with AL Re"ector (IP65)
High Bay II with PC Re"ector
Figure 2. High Bay II with PC re$ector dimensions.
Figure 1. High Bay II with AL re$ector dimensions.
Notes:
1. Unit : mm.
2. Tolerance : ± 5.0 mm.
Ø360
Ø153 Ø30
3
45
2
45
Ø 153
245
435
Ø 310
Ø153
Ø310
24
5
4
35
Ø30
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 5
Table 3. High Bay II speci%cations.
Speci#cations
The following describes the choices of color temperature, angles, and CRI of High Bay II for di&erent
demand.
Part No. Rating Units
Power Consumption 120*1, 2
W
Al Re$ector Field Angle 40 / 60 / 90 / 120 Degree
PC Re$ector Field Angle 140 Degree
Color Temperature 5300~6300 / 3800~4500 / 2800~3200 K
CRI 68 / 75 / 80 /
Weight (EBFxx-12xx) 3.3±0.2 kg
Weight (EBF2x-12xx) 2.5±0.2 kg
Part No. Symbol Rating Units
Al Re$ector EDIS Temperature TEDIS 80 °C
PC Re$ector Plastic Temperature TC 80 °C
Operating Temperature Topr -30~40 °C
Storage Temperature Tstg -40~60 °C
AC Input Voltage V 90~277 V
Life Time 25,000 hrs
Table 2. High Bay II absolute maximum ratings.
Absolute Maximum Ratings
The following table shows electrical characteristics and operating temperature of High Bay II.
Notes:
1. Power consumption has 5% tolerance.
2. Thermal equilibrium at 50 degree C ambient.
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 6
Illuminance Speci#cations
Power
ConsumptionPart No. CCT Field Angle Flux (Typ.)
120W
EBF1W-121x 5300~6300K 40° 6500 lm
EBF1H-121x 3800~4500K 40° 5300 lm
EBF1X-121x 2800~3200K 40° 4500 lm
EBF1W-122x 5300~6300K 60° 7300 lm
EBF1H-122x 3800~4500K 60° 6000 lm
EBF1X-122x 2800~3200K 60° 5200 lm
EBF1W-120x 5300~6300K 90° 7600 lm
EBF1H-120x 3800~4500K 90° 6200 lm
EBF1X-120x 2800~3200K 90° 5400 lm
EBF1W-123x 5300~6300K 120° 7300 lm
EBF1H-123x 3800~4500K 120° 6000 lm
EBF1X-123x 2800~3200K 120° 5200 lm
Table 4. Luminous $ux of 120W High Bay II.
Luminous "ux of 120W High Bay II.
Lux with di$erent distance for 120W High Bay II.
Table 5. Lux with di&erent distance for 120W High Bay II.
Power
ConsumptionPart No.
Lux@ 4m
(Typ.)
Lux@ 6m
(Typ.)
Lux@ 8m
(Typ.)
Lux@ 10m
(Typ.)
Lux@12m
(Typ.)
120W
EBF1W-121x 1200 530 290 185 125
EBF1H-121x 950 420 230 145 100
EBF1X-121x 850 360 205 125 90
EBF1W-122x 730 310 175 110 75
EBF1H-122x 580 253 135 85 60
EBF1X-122x 500 210 125 75 55
EBF1W-120x 600 260 145 95 65
EBF1H-120x 480 210 115 65 50
EBF1X-120x 420 180 100 60 45
EBF1W-123x 340 145 80 50 35
EBF1H-123x 270 120 65 40 26
EBF1X-123x 230 95 55 35 23
High Bay II with AL Re"ector (IP65)
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 7
Power
ConsumptionPart No. CCT Field Angle Flux (Min.) Flux (Typ.)
120W
EBF2W-124x 5300~6300K 140° 6500 lm 7200 lm
EBF2H-124x 3800~4500K 140° 5400 lm 5900 lm
EBF2X-124x 2800~3200K 140° 4600 lm 5200 lm
Table 6. Luminous $ux of 120W High Bay II.
Luminous "ux of 120W High Bay II.
Lux with di$erent distance for 120W High Bay II.
Table 7. Lux with di&erent distance for 120W High Bay II.
Power
ConsumptionPart No.
Lux@ 4m
(Typ.)
Lux@ 6m
(Typ.)
Lux@ 8m
(Typ.)
Lux@ 10m
(Typ.)
120W
EBF2W-124x 225 90 55 36
EBF2H-124x 185 75 45 28
EBF2X-124x 130 60 38 25
High Bay II with PC Re"ector
cd/klm C0-C180 C90-C270
2400
1600
cd/klm C0-C180 C90-C270 cd/klm C0-C180 C90-C270 cd/klm C0-C180 C90-C270
1200
800
1600
1200
800
600
400
Light Patterns
EBF1x - xx1x
EBF2x -124x
EBF1x - xx2x EBF1x - xx0x EBF1x - xx3x
Figure 3. High Bay II light patterns.
cd/klm C0-C18 0 C90-C270
230
390
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 8
Figure 4. High Bay II application.
Applications
Edison High Bay II can produce an intense light in a certain area. It can be easily installed or
replaced a traditional High Bay II lighting in warehouse, factory, gymnasium, large outlet, and etc.
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 9
0.0
1.98
3.82
22.00m15.0110.015.010.01
5.89
7.73
9.88
11.72
13.88
15.72
17.88
19.72
21.98
24.00m
Module
Cabinet
Figure 5. High Bay II light plan example : warehouse application.
Figure 6. High Bay II light plan example : warehouse simulation picture.
120W High Bay II Application.
20 30 60 100 120 140 160 180
180180
180
180
180
180
180
180
No.of module: 20
Flux per module: 7,600lm
Total Power: 2,400W
Area: 528m2
/ 5,683ft2
LPD: 4.55 W/m2
/ 0.42 W/ft2
Workplan height: 0.85m
Height of Room: 8.000 m, Mounting Height: 6.400 m,
Light loss factor: 0.80, Values in Lux, Scale 1:309
Surface
Workplane(0.85m) /
Floor(0m) 20
70
50
112
1703 .392 17
200
29
83
6.13
13.68
3.77
21
24
Ceiling(8m)
Walls
Eav [lux] Emin [lux] Emax [lux]
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 10
Figure 7. 120W High Bay II VS 400W Mercury Vapor Lamp.
Note : Calculation based on 24 hours of daily operation.
Power Reduction by 70%Reduction of CO2
emission by 1286 kgSaves 92 trees a year= =
120W High Bay II VS 400W Mercury Vapor Lamp
Environmentally Friendly
3456
1037
70%4000
3000
2000
1000
KWh
01 Year
Mercury Vapor Lamp (400W)
Mercury Vapor Lamp (400W)1500
1000
500
0
dollars
1 2 3 4 Year
Saves:USD224
Saves:USD11.5
Saves:USD436.5
Saves:USD649
Edison High Bay (120W)
Edison High Bay (120W)
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 11
PC Re$ector Packge 120W Packge 120W Packge
(driver external)
Figure 8. High Bay II package.
Package Information
AL Re$ector Packge120W Packge 120W Packge
(driver external)
Carton
Carton
Notes:
1. 1pc package of 120W heatsink length version : 215mm(width)*215mm(length)*460mm(height)
1pc package of 120W heatsink length version (driver extrnal): 215mm(width)*275mm(length)*460mm(height)
2. Carton package : 300mm(width)*458mm(length)*485mm(height) (carton package contains 2pcs 120W packages)
3. AL Re$ector Package : 395mm(width)*395mm(length)*170mm(height)
(Re$ector Package contains 5 pcs 14” re$ectors)
Notes:
1. 1pc package of 120W heatsink length version : 215mm(width)*215mm(length)*460mm(height)
1pc package of 120W heatsink length version (driver extrnal): 215mm(width)*275mm(length)*460mm(height)
2. Carton package : 300mm(width)*458mm(length)*485mm(height) (carton package contains 2pcs 120W packages)
3. PC Re$ector Package : 220mm(width)*170mm(length)*460mm(height)
(Re$ector Package contains 3 pcs 12” PC re$ectors, 3 pcs 12" iron rings, and accessories)
High Bay II with AL Re"ector (IP65)
High Bay II with PC Re"ector
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 12
Installation Information
AC wire
AC terminal
High Bay
Cable Output wire of High Bay AC wire with plug
Phase Conductor
(Line)Brown Any
Neutral Conductor
Blue Any
Protective Conductor
Green-and-Yellow Green-and-Yellow
Table 8. Cabal color code of High Bay II installation
Figure 9. Cable installation of High Bay II series
Lighting Design Manufacturing Service
www.edison-opto.com
Copyright © 2011 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 6 13
List of the Modi#cations
Table 9. list of the modi%cations for High Bay II.
Versions Modi#cation Date
1 1. Establish a Datasheet. 2011.03.17
21. Revised operating temperature of absolute maximum
ratings2011.04.27
31. Revised the part numers of 120w High Bay II in table 5, 6
and %gure 4. 2011.06.10
4
1. Modi%ed the %gures in table 4 (lux with distance for 120W
High Bay II)
2. Update the %gures of Package Information
3. Update the nomenclature
4. Update the dimention of High Bay II
2011.07.14
5 1. Revised the %gures of Package Information 2011.08.22
61. Revised the %gures of Package Information
2. Update the Installation Information2011.09.19
About Edison Opto
Edison Opto is a leading manufacturer of high power LED and a solution provider experienced
in LDMS. LDMS is an integrated program derived from the four essential technologies in LED
lighting applications- Thermal Management, Electrical Scheme, Mechanical Re%nement, Optical
Optimization, to provide customer with various LED components and modules. More Information
about the company and our products can be found at www.edison-opto.com
Copyright©2011 Edison Opto. All rights reserved. No
part of publication may be reproduced or transmitted
in any form or by any means, electronic or mechanical,
including photo copy, recording or any other
information storage and retrieval system, without
prior permission in writing from the publisher. The
information in this publication are subject to change
without notice.
www.edison-opto.com
For general assistance please contact:
For technical assistance please contact: