edmi smart metering solutions
DESCRIPTION
Product CatalogueTRANSCRIPT
Smart Metering Solutions
EDMI is one of the world’s leading smart metering solutions providers.
We design, develop and manufacturetechnologically advanced digital meters andmetering systems for the global utility industry. Our range of innovative products includes digitalmeters, advanced infrastructure and energymanagement systems.
With over 30 years industry experience weensure all of our products are technologicallyproven and manufactured to the highest quality.The entire EDMI product range is reliable,upgradable and accurate.
We are proud of our extensive market knowledgeand are committed to pre and after salescustomer support. As an international company,we provide global strength and our localpresence enables us to respond quickly to thediverse needs of regional utility markets.
DigitalSmartMetersThe EDMI range of innovative
products includes digital meters,advanced infrastructure and energymanagement systems.
With over 30 years industryexperience, we ensure all of ourproducts are technologically proven and manufactured to thehighest quality.
Mk7BSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2
DISCONNECT RELAY
MEASUREEVERYTHING
MODULAR PREPAYMENT SMARTREADY
OTAUPGRADABLE
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
The EDMI Atlas platform forms the coreof each of the products in the EDMIsmart metering system. Designedaround a low power, yet powerful andflexible metering engine, all of theproducts share the same robust loggingand communications functionality.
76.21(ADJUSTMENT
RANGE)
92.49
24.70
46.00
ø5.0
9.18
170.43
119.65
39.48
65.00
104.80
130.34
Mk7BSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2
Measurement
Δ Class 1 and Class 2 (MID Class B and Class A)
Δ Compliance with IEC 62052-11,62053-21, 62053-23
Δ Compliance with AS 62052.11,62053.21, 62053.23
Δ One Phase Two Wire with 120ADisconnect Switch
Voltage and Power Supply
Δ Nominal voltage: 220V – 240VΔ Operating range: 176V – 276VΔ Withstand: 0 – 288VΔ Frequency range: 45Hz – 65Hz
Current
Δ WC Range: 5/100A, 10/100AΔ WC Limit: 30 times Imax for 0.5
cycles, 7000A for three cyclesΔ Disconnect Relay: 120AΔ Disconnect Rating: IEC62055-31
UC3 @ Imax, 276 VAC
Measured Energy Values
Δ One element four quadrantΔ Import/Export/Absolute/Per
Quadrant: Wh, varh and VAhΔ W, var, VA, VRMS, IRMS,
Fundamental V, IΔ Power Factor, Frequency,
Phasor Angles
Power Quality Indication
Δ Total Harmonic Distortion (THD)Δ Waveform Download
SAG/SWELL
Δ Five Cycle ResolutionΔ Records time/date/phase/
duration/average and worstexcursion
Δ Programmable trigger levels
Inputs/Outputs Configuration
Δ Built-in S0 (27V, 27mA max) or Relay (240V, 2A) Output
Δ Two LED IndicatorsΔ Output Pulse Width:
1ms to 100msΔ Ripple ReceiverΔ Further I/O Expansion via PODs
Environmental
Δ Operating Range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to
75% mean, 95% non-condensing for 30 days
Δ Ingress Protection: IP54 (without suction)
Time Clock and Calendar
Δ Accuracy (internal) within 15 seconds per month
Δ Backup time of 10 years withoutpower (Lithium Battery)
Δ Supports Daylight Saving Time and Gregorian or Persian calendars
Battery Options
Δ Internal batteryΔ External battery, under terminal
cover or inside POD
Large LCD Display
Δ Large seven segment displayΔ Display digit size: 9.3mm (H)Δ Up to 60 user-defined screens of
any meter parameterΔ Display available even without
mains powerΔ Screen ID is full alphanumeric,
five digitsΔ Option for backlight
Load Survey/Profile
Δ AMI ReadyΔ 2.1 megabytes of Non-Volatile
MemoryΔ Over 7200 days (20 years)
storage (two channels, 30 minute intervals)
Δ Up to 32 channels and twoindependent surveys
Δ Intervals programmable fromone to 60 minutes
Δ Energy, instantaneous readings,pulsing inputs as channel sources
Δ Ability to store average/minimum/maximum values for interval duration
Tamper Detection and Alarms
Δ Provision for sealing with conventional wire or plasticseals, meter is sealed for life
Δ Reverse current senseΔ Option for magnetic
tamper detectionΔ Advanced tamper detection
and loggingΔ Pre-programmed alarms for
meter self-checkΔ Alarms trigger LEDs,
enunciators, relay outputs or communications event
Δ Alarms are stored in event logs
POD System
Δ Interchangeable PODs for I/Oand communications
Δ Hot pluggable, automatedconfiguration
Δ Sealable separatelyΔ Robust TCP/UDP/IP/PPP GPRSΔ Standard POD options include:
√ GPRS modem with internalantenna + ZigBee SEP 1.x.
√ GPRS modem with externalantenna + ZigBee SEP 1.x. + 3 I/O
√ Other combinations includingRS232 and RS485
√ Ethernet + ZigBee SEP 1.x.
Software
Δ EDMI EziView software available for meter programming andreading (Windows 7/Vista/XP/2000)
Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR solutions (Windows 7/Vista/XP/2000)
Δ Supported by many popularthird-party multi-vendor AMRsystems
Prepayment
Δ Credit or debit operationΔ Energy or currency basedΔ STS token compatible (IEC
62055-41)Δ Multiple energy sourcesΔ Eight rates per sourceΔ External debt repayment x2Δ Minimum charges, standing
charges and emergency creditΔ Configurable warnings and
indicators
Time of Use
Δ Up to 48 rates plus unified rateΔ Up to 32 separate import and
export registersΔ Daily, weekly, monthly, yearly and
specialΔ Up to 200 special days and eight
seasonsΔ Up to 61 previous billing periods
plus billing totalsΔ Block or rolling maximum
demandΔ Energy, pulsing inputsΔ Time of maximum demand
Security
Δ Multi-level security (Usernameand password includingencrypted log-in)
Δ Up to seven independentsecurity levels
Δ Up to six individual usersΔ AES128 bit encryption
Communications
Δ Up to three independentlyworking communication ports
Δ Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)
Δ Option for DLMS COSEM (IEC 62056)
Δ POD interface for easy fieldupgrade or replacement
Physical Dimensions
Δ Short cover: 180mm (H) x 131mm (W) x 65mm (D)
Δ Long cover: 210mm (H) x131mm (W) x 65mm (D)
Δ Weight: approx. 0.75 kg (0.95 kg with modem)
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
Mk7CSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2
AMIAMI
READYDISCONNECT
RELAYLARGE DATA
STORAGELARGE
DISPLAYMEASURE
EVERYTHINGTAMPER PROOF
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
The EDMI Atlas platform forms the coreof each of the products in the EDMIsmart metering system. Designedaround a low power, yet powerful andflexible metering engine, all of theproducts share the same robust loggingand communications functionality.
Mk7CSmart Single Phase Electronic Revenue MeterAtlas Series — Class 1 and Class 2
Measurement
Δ Class 1 and Class 2 (MID Class B and Class A)
Δ Compliance with IEC 62052-11,62053-21, 62053-23
Δ One Phase Two Wire withDisconnect Switch
Voltage and Power Supply
Δ Nominal voltage: 220V – 240VΔ Operating range: 180V – 280VΔ Withstand: 0 – 290VΔ Frequency range: 45Hz – 65HzΔ Internal battery
Current
Δ WC Range: 5/100A, 10/100AΔ WC Limit: 30 times Imax for 0.5
cycles, 7000A for three cyclesΔ Disconnect Rating: IEC62055-31
UC3 @ Imax, 276 VAC
Measured Energy Values
Δ One element four quadrantΔ Import/Export/Absolute/Per
Quadrant: Wh, varh and VAhΔ W, var, VA, VRMS, IRMS,
Fundamental V, IΔ Power Factor, Frequency,
Phasor Angles, temperature
Power Quality Indication
Δ Total Harmonic Distortion (THD)Δ Waveform Download
SAG/SWELL
Δ Five Cycle ResolutionΔ Records time/date/phase/
duration/average and worstexcursion
Δ Programmable trigger levels
Inputs/Outputs Configuration
Δ Up to four I/O total in IsolatedGroups (Max. 1 relay Output)
Δ Options include: Passive/ActiveInputs, SO/Relay Outputs
Δ Passive Input Voltage: 5V, 12V,48V, 110V, 240V
Δ Active Input Voltage: 12VΔ SO Output: 27V, 27mA maximumΔ Relay Output: 240V, 5A/2AΔ Two LED IndicatorsΔ Programmable Output Pulse
Width: 1ms to 100msΔ Ripple Receiver
Environmental
Δ Operating Range: -25˚C to 60˚CΔ Limit range: -25˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to
75% mean, 95% non-condensing for 30 days
Δ Ingress Protection: IP54
Time Clock and Calendar
Δ Accuracy (internal) within 15 seconds per month
Δ Backup time of 10 years withoutpower (Lithium Battery)
Δ Supports Daylight Saving Time and Gregorian or Persian calendars
Large LCD Display
Δ Large seven segment displayΔ Display digit size: 9.3mm (H)Δ Up to 60 user-defined screens of
any meter parameterΔ Display available even without
mains powerΔ Definable enunciators
Time of Use
Δ Up to eight rates plus unifiedrate
Δ Up to 32 separate import andexport registers
Δ Daily, weekly, monthly, yearly andspecial
Δ Up to 200 special days and eightseasons
Δ Up to 61 previous billing periodsplus billing totals
Δ Block or rolling maximumdemand
Δ Energy, pulsing inputsΔ Time of maximum demand
Load Survey/Profile
Δ AMI ReadyΔ 2.1 megabytes of Non-Volatile
MemoryΔ Over 7200 days (20 years)
storage (two channels, 30 minute intervals)
Δ Up to 32 channels two time-independent load surveys
Δ Intervals programmable fromone to 60 minutes
Δ Energy, instantaneous readings,pulsing inputs as channel sources
Δ Ability to store average/minimum/maximum values for interval duration
Tamper Detection and Alarms
Δ Provision for sealing with conventional wire or plastic seals
Δ Reverse current senseΔ Option for magnetic
tamper detectionΔ Advanced tamper detection
and loggingΔ Pre-programmed alarms for
meter self-checkΔ Alarms trigger LEDs,
enunciators, relay outputs or communications event
Δ Alarms are stored in event logs
Software
Δ EDMI EziView software available for meter programming andreading (Windows 7/Vista/XP/2000)
Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR solutions (Windows 7/Vista/XP/2000)
Δ Supported by many popularthird-party multi-vendor AMRsystems
Prepayment
Δ Credit or debit operationΔ Energy or currency basedΔ STS token compatible (IEC
62055-31)Δ Multiple energy sourcesΔ Eight rates per sourceΔ External debt repayment x2Δ Minimum charges, standing
charges and emergency creditΔ Configurable warnings and
indicators
Security
Δ Multi-level security (Usernameand password includingencrypted log-in)
Δ Up to seven independentsecurity levels
Δ Up to six individual usersΔ AES128 bit encryption
Communications
Δ Up to three independentlyworking communication ports
Δ Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)
Δ RS-232 with modem powersupply (2G/3G supported)
Δ RS-485 multi-drop (2 or 4 wireRJ45 or 2 wire screw terminal) orsecond RS-232
Δ Option for passive RS-232Δ UDP/IP BPRS/PPP capableΔ Option for Zigbee Mesh RF, MV-
90 & PLC
Physical Dimensions
Δ Short cover: 180mm (H) x 131mm (W) x 65mm (D)
Δ Long cover: 210mm (H) x131mm (W) x 65mm (D)
Δ Weight: approx. 0.75 kg (0.95 kg with modem)
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
225.0
134.0
213.5
51.7
71.2
Mk10AAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 1 and Class 2
CT/WC CONNECTED
AMIAMI
READYLARGE DATA
STORAGELARGE
DISPLAYMEASURE
EVERYTHINGUPGRADABLE
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
The EDMI Atlas platform forms the coreof each of the products in the EDMIsmart metering system. Designedaround a low power, yet powerful andflexible metering engine, all of theproducts share the same robust loggingand communications functionality.
Mk10AAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 1 and Class 2
240
166 74
152
128 159
Measurement
Δ Class 1 and Class 2 (MID Class B and Class A)
Δ Compliance with IEC 62052-11,62053-21, 62053-23
Δ Compliance with AS 62052.11,62053.21, 62053.23
Voltage and Power Supply
Δ Nominal voltage: 220V – 240VΔ Operating range: 180V – 290VΔ Burden: <10VA/phase @ Vn
(Two Phase)Δ Frequency range: 45Hz – 65Hz
Current
Δ CT Range: 1/6A, 5/20AΔ CT Limit: 20 times Imax for
0.5 secondsΔ WC range: 5/100A, 10/100AΔ WC limit: 30 times Imax for
0.5 cycles, 7000A for three cyclesΔ Burden: <0.5VA/phase
Measured Energy Values
Δ Three element four quadrantΔ Import/Export Wh, varh and VAhΔ Per quadrant Wh, varh and VAhΔ Absolute Wh, varh and VAhΔ Phase A,B,C and total
Other Measured and DisplayedValues
Δ Power: W, var, VA, VRMS, IRMS
Δ Power factor, frequency, phasorangles
Power Quality Indication
Δ Total Harmonic Distortion (THD)Δ Unbalance (sequence
components)Δ Waveform download
SAG/SWELL
Δ Five cycle resolutionΔ Records time/date/phase/
duration/average and worstexcursion
Δ Programmable trigger levels
Inputs/Outputs Configuration
Δ Up to four I/O total in threeisolated groups (maximum tworelay outputs)
Δ Options include: passive/activeinputs, S0/BOSFET/relay outputs
Δ Passive input voltage: 5V, 12V,48V, 110V, 240V
Δ Active input voltage: 12VΔ BOSFET Output: 240V, 100mA
maximumΔ S0 output: 27V, 27mA maximumΔ Relay output: 240V, 2AΔ Two LED indicators, independent
of I/OΔ Programmable output pulse
width: 1ms to 100ms
Environmental
Δ Operating range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to
75% mean, 95% non-condensing for 30 days
Δ Ingress protection: IP54, UL50 (3R)
Δ Salt spray resistant (IEC 60068-2-11)
Load Survey/Profile
Δ AMI ReadyΔ 2.1 megabytes of non-volatile
memoryΔ Over 7200 days (20 years)
storage (two channels, 30-minute intervals)
Δ Up to 32 channelsΔ Intervals programmable from
one to 60 minutesΔ Two independent surveysΔ Energy, instantaneous readings,
pulsing inputs as channelsources
Δ Ability to storeaverage/minimum/maximumvalues for interval duration
Physical Dimensions
Δ Standard version: approx.240mm (H) x 166mm (W) x74mm (D)
Δ Weight: approx. 2 kg for WC,approx. 1.8 kg for CT
Time Clock And Calendar
Δ Accuracy (internal) within 15 seconds per month
Δ Backup time of 10 years withoutpower (lithium battery)
Δ Supports Daylight Saving TimeΔ Supports Gregorian or
Persian calendars
Large LCD Display
Δ Large seven segment displayΔ Display digit size: 10.7mm (H)Δ Up to 60 user-defined screens of
any meter parameterΔ Definable enunciatorsΔ Display available without mains
power
Time of Use
Δ Up to eight rates plus unifiedrate
Δ Up to 32 separate import andexport registers
Δ Daily, weekly, monthly, yearly and special
Δ Up to 200 programmable specialdays
Δ Up to 61 previous billing periodsplus billing totals
Δ Block or rolling maximumdemand
Δ Energy, pulsing inputsΔ Time of maximum demand
Security
Δ Multi-level security (usernameand password includingencrypted log-in)
Δ Up to seven independentsecurity levels
Δ Up to six individual usersΔ AES128 bit encryption
Tamper Detection and Alarms
Δ Provision for sealing withconventional wire or plastic seals
Δ Bypassing current and reversecurrent
Δ Advanced tamper detection andlogging
Δ Pre-programmed alarms formeter self-check
Δ Alarms trigger LEDs,enunciators, relay outputs orcommunications event
Δ Alarms are stored in event logs
Communications
Δ Three independently workingcommunication ports
Δ Option for DLMS COSEM (IEC 62056)
Δ Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)
Δ RS-232 with modem powersupply (2G/3G supported)
Δ RS-485 multi-drop (two or fourwire RJ45 or two wire Screwterminal) or second RS-232
Δ UDP/IP/PPP/GPRS capableΔ Compatible with ZigBee SEP 1.x.
Battery Options
Δ Internal batteryΔ Replaceable external battery
Software
Δ EDMI EziView software availablefor meter programming andreading (WindowsVista/XP/2000)
Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR Solutions (Windows Vista/XP/2000)
Δ Supported by many popularthird-party multi-vendor AMRsystems
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
Mk10DAdvanced Three PhaseElectronic Meter withDisconnect and Reconnect FeatureAtlas Series — Class 1 and Class 2
DISCONNECT RELAY
LARGE DATA STORAGE
LARGE DISPLAY
MEASUREEVERYTHING
UPGRADABLE
AMIAMI
READY
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
The EDMI Atlas platform forms the coreof each of the products in the EDMIsmart metering system. Designedaround a low power, yet powerful andflexible metering engine, all of theproducts share the same robust loggingand communications functionality.
Mk10DAdvanced Three PhaseElectronic Meter withDisconnect and Reconnect FeatureAtlas Series — Class 1 and Class 2
292.5
17595
170
158.5
Measurement
Δ Class 1 and Class 2 (MID Class B and Class A)
Δ Compliance with IEC 62052-11,62053-21, 62053-23
Δ Compliance with AS 62052.11,62053.21, 62053.23
Δ Three phase four wire with 120Adisconnect switch
Voltage and Power Supply
Δ Nominal voltage: 220V – 240VΔ Operating range: 176V – 276VΔ Withstand: 0 - 290VΔ Burden: <10VA/phase @ Vn
(Three Phase)Δ Frequency range: 45Hz – 65Hz
Current
Δ WC range: 10/100AΔ Overcurrent: 30 times Imax for
0.5 cyclesΔ Burden: <0.5VA/phaseΔ Disconnect Relay: 120AΔ Disconnect Rating: IEC62055-31
UC3@Imax, 264.5 VAC
Measured Energy Values
Δ Three element four quadrantΔ Import/Export Wh, varh and VAhΔ Per quadrant Wh, varh and VAhΔ Absolute Wh, varh and VAhΔ Phase A,B,C and total
Other Measured and DisplayedValues
Δ Power: W, var, VA, VRMS, IRMS
Δ Power factor, frequency, phasorangles
Power Quality Indication
Δ Total Harmonic Distortion (THD)Δ Unbalance (sequence
components)Δ Waveform download
SAG/SWELL
Δ Five cycle resolutionΔ Records time/date/phase/
duration/average and worstexcursion
Δ Programmable trigger levels
Inputs/Outputs Configuration
Δ Standard top row I/O√ Up to four I/O total,
independent with 4kV isolation√ Options include: passive/active
inputs, S0/BOSFET/relayoutputs
√ Passive input voltage: 5V, 12V,48V, 110V, 240V
√ Active input voltage: 12V√ BOSFET output: 240V, 2A√ S0 Output: 27V, 27mA
maximum√ Relay output: 240V, 2A
Δ Programmable output pulsewidth: 1ms to 100ms
Environmental
Δ Operating range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: Up to
75% mean, 95% non-condensing for 30 days
Δ Ingress protection: IP54, UL50 (3R)
Δ Salt spray resistant (IEC 60068-2-11)
Load Survey/Profile
Δ AMI ReadyΔ 2.1 megabytes of non-volatile
memoryΔ Over 7200 days (20 years)
storage (two channels, 30-minute intervals)
Δ Up to 32 channelsΔ Intervals programmable from
one to 60 minutesΔ Two independent surveysΔ Energy, instantaneous readings,
pulsing inputs as channelsources
Δ Ability to storeaverage/minimum/maximumvalues for interval duration
Physical Dimensions
Δ Standard version: approx.292.5mm (H) x 175mm (W) x95mm (D)
Δ Weight: approx. 2.5 kg
Time Clock And Calendar
Δ Accuracy (internal) within 15 seconds per month
Δ Backup time of 10 years withoutpower (lithium battery)
Δ Supports Daylight Saving TimeΔ Supports Gregorian or
Persian calendars
Large LCD Display
Δ Large seven segment displayΔ Display digit size: 10.7mm (H)Δ Up to 60 user-defined screens of
any meter parameterΔ Definable enunciatorsΔ Display available even without
mains power
Time of Use
Δ Up to eight rates plus unifiedrate
Δ Up to 32 separate import andexport registers
Δ Daily, weekly, monthly, yearly and special
Δ Up to 200 programmable specialdays
Δ Up to 61 billing periods plusbilling totals
Δ Block or rolling maximumdemand
Δ Energy, pulsing inputsΔ Time of maximum demand
Security
Δ Multi-level security (usernameand password includingencrypted log-in)
Δ Up to seven independentsecurity levels
Δ Up to six individual usersΔ AES128 bit encryption
Tamper Detection and Alarms
Δ Provision for sealing withconventional wire or plastic seals
Δ Bypassing current and reversecurrent
Δ Advanced tamper detection andlogging
Δ Pre-programmed alarms formeter self-check
Δ Alarms trigger LEDs,enunciators, relay outputs orcommunications event
Δ Alarms are stored in event logs
Communications
Δ Three independently workingcommunication ports
Δ Option for DLMS COSEM (IEC 62056)
Δ Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)
Δ RS-232 with modem powersupply (2G/3G supported)
Δ RS-485 multi-drop (two or fourwire RJ45 or two wire Screwterminal)
Δ UDP/IP/PPP/GPRS capableΔ Compatible with ZigBee SEP 1.x.
Software
Δ EDMI EziView software availablefor meter programming andreading (WindowsVista/XP/2000)
Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR Solutions (Windows Vista/XP/2000)
Δ Supported by many popularthird-party multi-vendor AMRsystems
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
Mk10EAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 0.5S and Class 1
ACCURATE
AMIAMI
READYLARGE DATA
STORAGELARGE
DISPLAYTAMPER PROOF
UPGRADABLE
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
The EDMI Atlas platform forms the coreof each of the products in the EDMIsmart metering system. Designedaround a low power, yet powerful andflexible metering engine, all of theproducts share the same robust loggingand communications functionality.
Mk10EAdvanced Three PhaseElectronic Revenue MeterAtlas Series — Class 0.5S and Class 1
175.0
262.44
95.0
Measurement
Δ Class 0.5S and Class 1 (MID Class C and Class B)
Δ Compliance with IEC 62052-11,62053-21, 62053-22, 62053-23
Δ Compliance with AS 62052.11,62053.21, 62053.22, 62053.23
Δ Compliance with EN 50470-1,50470-3
Δ Three phase three wire, threephase four wire
Voltage and Power Supply
Δ Nominal voltage: 57.7V – 240V L-NΔ Operating limit: 52V – 290V L-NΔ Burden: <10VA/phase @ Vn
(three phase) (IEC 52053-61compliant)
Δ Frequency range: 45Hz – 65HzΔ Option for auxiliary supply and
UPS
Current
Δ CT range: 1/4A, 1/10A, 5/20AΔ CT meter: 20 times Imax for 0.5
secondsΔ WC range: 5/100A, 10/100A
(Class 1 or 2)Δ WC meter: 30 times Imax for 0.5
cyclesΔ Burden: <0.5VA/phase
Measured Energy Values
Δ Three element four quadrantΔ Import/export Wh, varh and VAhΔ Per Quadrant Wh, varh and VAhΔ Absolute Wh, varh and VAhΔ Phase A, B, C and total
Other Measured and DisplayedValues
Δ Power: W, var, VAΔ True RMS voltage/current (three
phase)Δ Power factor, frequency, phasor
angles
Power Quality Indication
Δ Total Harmonic Distortion (THD)Δ Sequence componentsΔ Waveform display
SAG/SWELL
Δ Five cycle resolutionΔ Records time/date/phase/
duration/average and worstexcursion
Δ Programmable trigger levels
Inputs/Outputs Configuration
Δ Standard top row I/O:√ Up to four I/O total,
independent common ground,4kv isolation
√ Options include: passive/activeinputs, S0/BOSFET/relayoutputs
√ Passive input voltage: 5V, 12V,48V, 110V, 240V
√ Active input voltage: 12V√ BOSFET output: 240V, 100mA
maximum√ S0 output: 27V, 27mA
maximum√ Relay output: 240V, 5A/2A
Δ Extended bottom row I/O:(Optional)√ As per standard I/O
Δ Output pulse width: 1ms to 100ms
Environmental
Δ Operating range: -25˚C to 60˚CΔ Limit range: -40˚C to 70˚CΔ Storage range: -40˚C to 80˚CΔ Relative humidity: up to 95%
non-condensing for 30 daysΔ Ingress protection: IP54Δ Salt spray resistant
(IEC 60068-2-11)
Load Survey/Profile
Δ AMI ReadyΔ 2.1 megabytes of non-volatile
memoryΔ Over 7200 days (20 years)
storage (two channels, 30-minute intervals)
Δ Up to 32 channelsΔ Intervals programmable from
one to 60 minutesΔ Two independent surveysΔ Energy, instantaneous readings,
pulsing inputs as channelsources
Δ Ability to storeaverage/minimum/maximumvalues for interval duration
Physical Dimensions
Δ Standard version: approx.262mm (H) x 175mm (W) x95mm (D)
Δ Weight: approx. 2.0 kg
Time Clock and Calendar
Δ Accuracy (internal) within 15seconds per month at 23˚C
Δ Backup time of 10 years withoutpower (lithium battery)
Δ Mains synchronised or internalcrystal timing (selectable)
Δ Supports Daylight Saving TimeΔ Supports Gregorian or Persian
calendars
Time of Use
Δ Up to eight rates plus unified rateΔ Up to 32 separate import and
export registersΔ Daily, weekly, monthly, yearly and
specialΔ Up to 200 programmable special
daysΔ Up to 61 previous billing periods
plus billing totalsΔ Block or rolling maximum demandΔ Energy, pulsing inputsΔ Time of maximum demand
Large LCD Display
Δ Large seven segment displayΔ Display digit size: 10.7mm (H)Δ Up to 60 user-defined screens of
any meter parameterΔ Definable enunciatorsΔ Display available without mains
power
Battery Options
Δ Internal batteryΔ Replaceable external batteryΔ Option for additional supercap
Security
Δ Multi-level security (usernameand password includingencrypted log-in)
Δ Up to seven independentsecurity levels
Δ Up to six individual usersΔ AES128 bit encryption
Tamper Detection and Alarms
Δ Provision for sealing withconventional wire or plastic seals
Δ Bypassing and reverse currentΔ Advanced tamper detection and
loggingΔ Pre-programmed alarms for
meter self-checkΔ Alarms trigger LEDs,
enunciators, relay outputs orcommunications event
Δ Alarms are stored in event logsΔ Option for magnetic immunity
Communications
Δ Three independently workingcommunication ports
Δ Option for DLMS COSEM (IEC 62056)
Δ Optical port: FLAG (IEC 62056-21) or ANSI Type 2 (ANSI C12.18)
Δ RS-232 with modem powersupply (2G/3G supported)
Δ RS-485 Multi-Drop (four or twowire, RJ45 or screw terminal)
Δ Option for second RS-232 PortΔ UDP/IP GPRS/PPP capableΔ Option for ZigBee SEP 1.x.
Software
Δ EDMI EziView software availablefor meter programming andreading (Windows7/Vista/XP/2000)
Δ EDMI MultiDrive softwareavailable for large scale AMI andAMR solutions (Windows 7/Vista/XP/2000)
Δ Supported by many popularthird-party multi-vendor AMRsystems.
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
G6000Smart Ultrasonic Gas MeterClass 1.5
AMIAMI
READYDISCONNECT
VALVE
IP67INGRESS
PROTECTIONSMARTREADY
TAMPER PROOF
UPGRADABLE
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
The G6000 is a compact and precise smart gas meter based onproven ultrasonic measurement technology. The meter is bothrobust and flexible. The meter offers an extended temperaturerange from -25°C to 55°C and is IP67 certified.
The unit comes complete with an integrated valve which, alongwith advanced software/firmware features, allows the unit to beremotely configured.
G6000Smart Ultrasonic Gas MeterClass 1.5
234
158
131
79.49
22
Measurement and Certification
Δ Ultrasonic gas meter compliantto EN14236:2007 (MID) andR137-142:2012 (OIML)
Δ Smart Meter Certified to Ex ic IIB T4 Gc and Ex ib IIA T1 Gb(ATEX Zone 1 and 2)
Δ Measurement accuracy: 0.03 to 0.06m3 <+/- 3%0.6 to 6m3 <1.5%
Δ Measurement class 1.5Δ Temperature compensation
Gas Supply
Δ Natural Gas SG 0.64m3 typicalΔ Meter capacity: 6m/h at <200Pa
pressure loss (including valve)Δ H and L gas
Environmental
Δ Operating range: -25˚C to 55˚CΔ Storage range: -30˚C to 70˚CΔ Relative humidity: 95%Δ Ingress Protection: IP67Δ Corrosion: 1000h salt
spray compliant
Disconnect Valve
Δ DC-powered stepping motorΔ <0.25dm/h leak rateΔ Oil-less constructionΔ Local/remote operation
Battery
Δ Main Cell: D Type Lithium (15years service life – replaceable)
Δ BackUp: Third AA Lithium(internal)
Time Clock and Calendar
Δ Accuracy: <+/- 5 sec/monthΔ Backup time 30 days without
main batteryΔ Supports Daylight Saving Time
for 15 years
Connections and PhysicalDimensions
Δ Connections: 1”BS 746couplings 6” centres
Δ Other centres also availableΔ 158mm (H) x 234mm (W) x
79.49mm (D)
LCD Display
Δ Large 16 x 2-character displayΔ Display digit size: 5.3 x 3.3mmΔ Multiple screens of any meter
parameterΔ Customisable and supports
multiple languageΔ Backlight standard
Load Survey/Profile
Δ AMI readyΔ Up to 2.0 Megabytes of non-
volatile memoryΔ 13 months of half hourly data
(also accessible on the LCD) Δ 48, 30 minute intervalsΔ Volume as channel sourceΔ Configurable Gas Day
Tamper Detect and Alarms
Δ Metrological seals to gas meterΔ Communications and battery
cover tamper evident sealsΔ Meter tamper detection alarmΔ Pre-programmed alarm logged
in event logΔ Alarms programmable to display
LCD status and communicationsevent
Software
Δ Supported by Interactive BackOffice (IBO) for meter datacollection and management
Δ Supported by Clariti browser-based energy data visualisationand reporting tool
Δ Supported by the Clariti iPhoneapp
Security
Δ Configurable user name andpassword login
Δ TRNG ANSI X9.31
Communications
Δ Optical Port compliant to EN62056-21
Δ WAN: GSM GPRS or SMSΔ Other custom options availableΔ Programmable Network
Settings:– Wake up schedule– Retry schedule– Network retry and logging– Diagnostics and monitoring
Materials
Δ Metal enclosure: powder-coatedzinc-plated steel/polycarbonate/nylon
Δ Smart index: polycarbonateΔ Ultrasonic unit: Polybutylene
terephthlateflow path, sensorand PCB
Processor
Δ Low powerΔ Extendable memory optionΔ Hardware cryptographyΔ Dual core Cortex M4Δ Back up software images for
high reliability
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
W
t
)
2
r
TRADITIONAL AUTOMATIC METER READING
SOFTWARE
TRADITIONAL METER
CONFIGURATION TOOL
NETWORK MANAGEMENT
SYSTEMS
MULTIDRIVE
MultiDriveComplete Head EndSoftware for Smart Meter/AMI Deployments
Why choose MultiDrive?
Reliable and robust data retrieval andmanagement for up to 500,000 meters
Fast and easy to use commissioning system.Reduces installation time and guaranteesquality meter installation andcommunications link
Unlocks all the functionality of the feature richEDMI Atlas Series smart meters
Large scale meter management withdedicated fleet management features aroundconfiguration change and firmware upgrades
Reliable end to end communications solution
The EDMI range of innovative productsincludes digital meters, advancedinfrastructure and energymanagement systems.
With over 30 years industry experience,we ensure all of our products aretechnologically proven andmanufactured to the highest quality.The entire EDMI product range isreliable, upgradable and accurate.
EDMI’s MultiDrive is a reliable andscalable Head End Software systemwhich allows back office utility systemsaccess to the AMI functionality providedby the EDMI range of Atlas Series digitalsmart meters.
Traditional Automatic Meter Reading Software
Δ Enables communication with a range of differentmeter vendor products
Δ Allows data retrieval for billing purposesΔ Do not support configuration change operations or
AMI functions
Traditional Meter Configuration Tool
Δ Allows users to perform configuration changesΔ Diagnostic analysis on individual meter devicesΔ Allows users to perform firmware upgradesΔ Allows users to access smart meter/AMI
functionality
Network Management Systems
Δ Manages the communications network to ensurethat back end systems can communicate reliablywith meters
MultiDrive
Δ Single product providing a combination of thefunctionality listed above
Δ Integrated and automated approachΔ MultiDrive provides utilities with the ability to unlock
the power of the EDMI smart meter productsΔ Easy to use access to all functions
MultiDriveComplete Head EndSoftware for Smart Meter/AMI Deployments
Network Management
Management of the communication connections Δ Support for multiple meter protocolsΔ Management of the connections to meters
across multiple bearersΔ Retrieval of signal strength informationΔ Bi-directional communicationsΔ Automatic linking of metering devices to correct
communication address or pathwayΔ Simplifies the deployment process via automatic
commissioning
Fleet Management
Management of the configuration, operation andgeneral maintenance of a fleet of metersΔ Management of meter setup/configuration
including reading and writing configuration to themeters
Δ Management of meter firmware includingupgrading or downgrading firmware in themeters
Δ Retrieval, storage and management of eventsreceived from smart meters
Measured Data Management
Retrieval and short term storage of measured dataΔ Retrieval of time of use data. The system
supports multi-register billing requirements,daily, monthly and three monthly billing cyclesand snapshot and interval values
Δ Retrieval of interval data including energyconsumption data and water and gas data
Δ Retrieval of power quality event data includingSag/Swell, Total Harmonic Distortion, Unbalance,over current exceedance
Δ Retrieval of minimum, maximum and averagevoltage, current and other electrical quantities
Non-Measurement Functionality
The control of other smart meter functions Δ Control of the connect/disconnect functionalityΔ Control of the load control functionality used in
demand side response, load shedding and loadlimiting business processes
Δ Send messages to In Home Displays via HANtechnologies
Scheduling
Δ Robust scheduling engine to trigger functions viatimed schedules, on an adhoc basis or based onevents received from meters
Δ Supports server or meter initiated connections
B2B Interface
Δ Includes file/database export and applicationprogramming interface to supportcommunicating with utility back office systems
Architecture/Performance
MultiDrive is based on traditional Client ServerarchitectureΔ Supports multiple communications servers to
allow scalabilityΔ Thick and thin clients for supporting multiple
concurrent usersΔ Ability to export data to other systems via file/DBΔ API’s to allow full control of functionality from back
office systemsΔ Can be tailored to match operational constraintsΔ Can be deployed to either Oracle or MS SQLΔ MultiDrive is a Wintel based systemΔ Designed to operate in a utility environment with
24/7 up timeΔ Supports virtual machine, clustering and other HA
technology so it can be integrated with the latestDR and business continuity planning
Δ Designed to resume upon restoration ofcommunications or other infrastructure failures
Δ Tested for reading up to 500,000 devices usingtypical GPRS communications on a daily basis
B2B INTERFACE
TOU
MEASURED DATA MANAGEMENT NON MEASUREMENT FUNCTIONALITY
METER SETUP FIRMWARE METER EVENTS
FLEET MANAGEMENT
PROTOCOLS CONNECTION MANAGEMENT COMMISSIONING
NETWORK MANAGEMENT
INTERVAL DATA PQ DATA/EVENTS DISCO/RECO LOAD CONTROL INFO DISPLAY
SCH
EDU
LIN
G
MultiDrive Functionality
MULTIDRIVE SERVER
DATABASE
APIs PROCESSMODULE
PROCESSMODULE
FILE/DBEXPORTS APIs ADD-ONS
COMSERVER
COMSERVER
MDCLIENT
} {}
{}
{}
{}
}
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom www.edmi-meters.co.uk
Copyright © 2013 EDMI Limited. All Rights Reserved. Atlas is a registered trademark of EDMI Pty Ltd. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
Tel: +44 (0)191 233 6322
Email: [email protected]@edmi-meters.co.uk
EDMI Europe LtdThe Grainger SuiteDobson HouseRegent CentreNewcastle upon TyneNE3 3PFUnited Kingdom
Tel:+44 (0)191 233 6322
Email:[email protected] [email protected]
www.edmi-meters.co.uk