7/27/2019 EEE-553.doc

1/3

PSIT | PSIT-College of Engineering, Kanpur

Electrical & Electronics Engineering Department

B. Tech, Final Year, VII semester, Session-2013-14

LIST OF EXPERIMENTS

EEE 553 ELECTRICAL INSTRUMENTATION LAB

(GBTU LIST)

1 Measurement of displacement using LVDT.

2. Measurement of displacement using strain gauge based displacement transducer.3. Measurement of displacement using magnetic pickup.

4. Measurement of load using strain gauge based load cell.5. Measurement of water level using strain gauge based water level transducer6. Measurement of flow rate by anemometer

7. Measurement of temperature by RTD.

8. Measurement of temperature by thermocouple9. Study of P,PI and PID controllers

10. Study of storage oscilloscope and determination of transient response of RLC circuit.

11. Determination of characteristics of a solid state sensor/fibre-optic sensor

12. Design and test a signal conditioning circuit for any transducer13. Study of data acquisition system using lab view software and test all signal points

14. Measurement of sine, triangular ,square wave signal of function generator and verify its

frequency at 100 Hz tap point using labview software.15. Measurement of voltage and current signal of programmable power supply using

Lab view GPIB interface.

Note: - Three more software based experiments may be added in place of experiments

nos.13 to 15.at the institute level.

LAB PLAN

NAME OF THE FACULTY: PIYUSH AGNIHOTRISUBJECT NAME :ELECTRICAL INSTRUMENTATION LAB.

SUBJECT CODE: EEE-553

7/27/2019 EEE-553.doc

2/3

LAB PLAN

S.No. PRACTICAL NAME LAB DATE No of

LABS

CUMULATIVE

NO. OF LABS

1 Measurement of displacement using

LVDT

1 1

2 Measurement of displacement usingstrain gauge based displacementtransducer

1 2

3 Measurement of displacement usingmagnetic pickup.

1 3

4 Measurement of load using straingauge based load cell.

1 4

5 Measurement of water level usingstrain gauge based water leveltransducer

1 5

6 Measurement of flow rate byanemometer

1 6

7 Measurement of temperature by RTD 1 7

8 Measurement of temperature bythermocouple

1 8

9 Study of P,PI and PID controllers 1 9

10 Study of storage oscilloscope and

determination of transient response ofRLC circuit.

1 10

11 Determination of characteristics of asolid state sensor/fibre-optic sensor

1 11

12 Design and test a signal conditioningcircuit for any transducer

1 12

13 Study of data acquisition system usinglab view software and test all signal

points

1 13

14 Measurement of sine, triangular,square wave signal of function

generator and verify its frequency at100 Hz tap point using labview

software.

1 14

15 Measurement of voltage and currentsignal of programmable power supplyusing Lab view GPIB interface.

1 15

7/27/2019 EEE-553.doc

3/3