ef 2000 single seater interior s.a. eduard 32 665 · ef 2000 single seater interior s.a. 32 665 32...
TRANSCRIPT
1/32 scale detail set for Revell kit •sada detailù pro model Revell 1/32
1/3
EF 2000 Single Seater interior S.A.
32 665
32 665
ORIGINAL KIT PARTSPÙVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTSLEPTANÉ DÍLY
PARTS TO BE REMOVEDDÍLY K ODSTRANÌNÍ
FILLTMELIT
eduard
REMOVEODSTRANIT
OPTIONVOLBA?REPLACENAHRADIT
BENDOHNOUT
GRINDOBROUSIT
SYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁŽ
DRILL HOLEVRTAT OTVOR
APPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM
Kit part 116
1
18
25 24
26 27
15
14
21
2
3
Kit part 119
Kit part 118
22
23
Kit part 120
?
8
9
10
30
Kit part 134
126
11
7
135
29
35
28
31
32
33
4
34 17
1636
37
57
Kit part 135
2 pcs
2/3 32 665
39 40
38
59
Kit part 116
Kit part 134
Kit part 117
!ball pen
HOW TO MAKE THE RELIEF ONOPPOSITE - REVERSE -
OF THE PLATE
4853
49 50
Kit part 143
Kit part 121
5251
44
45
56
54
Kit part 8
Kit part
55
47
3 pcs
Kit
pa
rt
170
41
42
Kit part 139
plasticKit part 141
43
3 pcs
3 pcs
Kit
pa
rt
142
2 pcs
Kit part 138
58
Kit part 138
39 40
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part.2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo.
1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted.5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat.
3/3 32 665
© EDUARD M.A. 2010 www.eduard.com Made in Czech Republic
PARTS WITH GLUE . DÍLY OPATØENÉ LEPIDLEM
46
Fuselage
Cockpit
Kit part 136
20
19
Kit part 143