蓋開閉センサー部

1 2 3 4 5 6

SKY-FREE

V5.0（HFP1.7、HSP1.2、HD Voice、Voice Prompts、A2DP1.3、AVRCP1.6、IOS BATTERY STATE MONITOR、Voice reporting、Multipoint）

4

4

25

25

1.イヤホンの充電:イヤホンを充電ケースに入れることで自動的に充電できます。（又は蓋が開いたままの状態では2分後に自動的に充電開始されます。），イヤホン（L/R）充電中は赤色LEDが点灯し，充電ケースのディスプレイはイヤホン（L/R)の充電状態を示します；満充電状態になると，赤色LEDは自動的に消灯し，ディスプレイ上に充電量が表示され5秒後にオフになります。

充電ケースが満充電になった後，充電ケースのUSBポートにOTGアダプタを挿入し、対応するスマホデータケーブルを接続して直接スマホを充電できます。スマホ充電中は、充電ケースのバッテリー残量ディスプレイは100%-1%で減っていきます。スマホの充電が完了すると、ディスプレイ進捗は停止するか充電ケースのバッテリーがなくなった時にオフになります。

充電ケースを開いた後、左右のイヤホンは自動的に接続されます：充電ケースを開けたとき（又は左右イヤホンを取り出したとき），左右イヤホンが充電ケース内にあるとき（又はイヤホンを取り出したとき）青LEDが点灯し、自動的に同期されます，両イヤホンが同期完了後，メインイヤホン（先に取り出したイヤホン）赤青LEDが交互に点滅し，サブイヤホンは消灯します，この時点でスマホとBluetooth接続の準備が可能になります，スマホのBluetooth接続設定画面を開いて“SKY-FREE”を探して，タップして接続を完了させてください。

充電ケースを開けたとき（又は左右イヤホンを充電ケースより取り出したとき）、左右イヤホンは自動的に同期され、自動的にBluetooth接続されます（最後に使用したスマホ）

120

79*47*32mm

5000mAh

SKY-FREE

Intelligent Charging

Charging box working statusBefore using for the first time, put the earphones in the charging box and connect theMicro USB cable to charge the charging box and the earphones.

2.Song switching to prev/next song: Double-click when in the music playback mode L earphone touch area to switch to the previous track; Double-click the R earphone touchbutton area to switch to the next track.

3.Answer/hang up the phone: When the earphone is connected tothe phone, double-click the touch button area of the L or R earphone.

4. Reject the call: Press and hold for 2 seconds in the incomming call state L or R earphone touch button area.

5. Volume adjustment: Press the L earphone touch button areawhen entering the music playback mode, the volume can be graduallyreduced (-). Press the R earphone touch button area to graduallyincrease the volume(+). When the volume is adjusted to the maximumvolume there will be an alarm tone.

6.Siri wakeup: Click the L-earphone or R-earphone touch button area three times.

Touch Aera

(Supports dual earphones stereo calls, and also supports single earphone calls)

Bluetooth products are affected by the use environment and connection distance.Please do not use in strong electromagnetic interference and radiation environments.

Please pay attention to using the original charger or computer port to charge the unit. Do not use cheap and inferior chargers.

This unit must be charged with the original charging cable. The MICRO USB cableshould be connected to a 5V (1A-2A) power adapter and a 5V (1A-2A) car charging head. It is recommended to charge the charging box with a power adapter of 2A or less.

If your bluetooth earphones are not used for a long time, please charge it in about 30 days to prevent failure to start due to lack of electricity.

We may make the changes for this product without prior notice to you for the software or the hardware upgrade and modification, please refer to the actual product as final.

（60% volume）Charging box battery level display

Left earphone charging slot

Hall inductionregion

Right earphone charging slot

Charging box display intelligently monitors power level.Charging box power indicator：Monitor the battery level of the charging box (the power is 1%~100%).Left earphone battery indicador: Monitor left earphone charging level (4 grids, 25% for each grid,100% for full grid).Right earphone battery indicator: Monitor the right earphone charging level(4 grids, 25% for each grid, 100% for full grid).

2. Charging the charging box: Connect the Micro USB charging cable for charging. Thecorresponding power of the charging box display is 1% to 100% until the charging box is full.

Note: When you put the earphone into the charging box, please press gently to stabilize it until the earphone’s battery level display lights up, to make sure the earphone contacts with the charging probe to avoid not charging properly.

Charging box as mobile battery functionAfter the charging box is fully charged, insert the OTG adapter into the USB interface of the charging box to connect the matching mobile phone data cable to directly charge the mobile phone. When the mobile phone is charged, the power of the charging box display is displayed as 100%-1% for the charging box until the mobile phone is fully charged. The display will go off when the display stops after the phone battery is fully charged or when the charging box is depleted.

Please choose the earpieces that are suitable for you from the different sizes ofearpieces we provide. When the earpieces are completely close to the earphones, youcan get the best sound quality. Reminder: Your left ear and right ear may be suitable fordifferent sizes of earpieces (such as A). Insert the earphones with the earpieces intoyour ear canal, then fine-tune the earphones to position them in a firm and comfortableposition (such as B).

Wearing Method

1. Smart and quick connection

2. Use the earphones again

Pairing

When the charging box is opened (or the left/right headphones are taken out from the charging box), the left/right headphones will automatically connect and automatically connect to Bluetooth (the last connected device)

L/R earphones Basic Function Operation1. Music Play/Pause: Open the phone player. When theearphones are connected to the phone, click the toucharea of the L earphone or R earphone.

about

about200about

After the charging box is opened, the left/right headphones will automatically start to connect: when the charging box is opened (or the left/right headphones are taken out from the charging box), the left/right headphones are in the charging box (or the headphones are taken out from the charging box) The blue light is turned on and automatically paired. After the pair of headphones is successfully paired, the main earphone (the headset first taken off has the default priority) flashes red and blue alternately, and the auxiliary earphone light is off. At this point, the mobile phone is connected to the Bluetooth connection, and the mobile phone is turned on. Search for the "SKY-FREE" connection of the Bluetooth device and click it to use it normally.

Tip:Left/right earphone re-pairing: In the case that the left/right earphone pairing fails, the left earphone is taken out from the charging box, and the red and blue lights alternately flash ，then double-click to enter the pairing waiting mode (blue light is on), the mode for right ear is the same as the left ear. When the left/right earphones are double-clicked, they can be automatically paired. (One pair of earphones flashes red and blue alternately after the pairing is successful, and the other earphone turns off).

7.Power on: When the earphone is off, press and hold the earphone for 1.5 seconds. Or just take it out from the case, it will automatically turn on.

8.Power off: When the earphone is on, double-click and press the button for 3 seconds. Or just put it back to the case, it will automatically turn off.

Shut down 1. Put the left/right headphones into the charging box and the earphone will automatically shut down

2. Disconnect the left/right headphone from the mobile phone's bluetooth. After three minutes of no device connection, the left/right headphone will automatically shut down.

Barrier-free distance is about 30 meters

1. Headphone charging: When the earphone is placed in the charging box, closing the cover and the earphone will be automatically charged (or the battery will be automatically charged after 2 minutes in the state of opening the cover). The earphone (L/R) will always light red LED when charging, the charging box display the corresponding headphone (L/R) power follows the change; when the charge is saturated, the red LED will automatically go out, and the corresponding power on the display will turn off within 5 seconds after the display of the headphone power is full.

120g

79*47*32mm

5000mAh

LED display