ego self closing lavatory faucet tx126le · "ego" self closing lavatory faucet tx126le...
TRANSCRIPT
Ø42
S06688RR
OPERATING CONDITIONSWater supply pressure : 0.05 ~ 0.75 MPa.Ensure that water supply is clean ( No Sand, Dirt, Etc.).
1.2.
"EGO" SELF CLOSING LAVATORY FAUCET TX126LE
MAINTENANCEAlways wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
ATTENTION
SPECIFICATIONS TROUBLESHOOTINGINSTALLATION
Lock Nut
Packing
Washer
ADJUSTMENT
- Turn the spindle left, to get the short flow time.- Turn the spindle right, to get the long flow time.
Maximum flow time 20 second at water pressure 0.05 Mpa. For your satisfaction, please adjust the flow time.
Spindle
LONG
SHORT
CHECKPOINT
Flow rate unsatisfactory 1 , 2 Remove and clean
The Handle is loose 3 Tighten
PROBLEM SOLUTION
1. AERATOR
2. STRAINER
3. BOLT
Hex. Key
Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended.
Cap
Bolt
R7
Lavatory Hole Ø25
Faucet
Ø42
S06688RR
OPERATING CONDITIONSWater supply pressure : 0.05 ~ 0.75 MPa.Ensure that water supply is clean ( No Sand, Dirt, Etc.).
1.2.
"EGO" SELF CLOSING LAVATORY FAUCET TX126LE
MAINTENANCEAlways wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap.
ATTENTION
SPECIFICATIONS TROUBLESHOOTINGINSTALLATION
Lock Nut
Packing
Washer
ADJUSTMENT
- Turn the spindle left, to get the short flow time.- Turn the spindle right, to get the long flow time.
Maximum flow time 20 second at water pressure 0.05 Mpa. For your satisfaction, please adjust the flow time.
Spindle
LONG
SHORT
CHECKPOINT
Flow rate unsatisfactory 1 , 2 Remove and clean
The Handle is loose 3 Tighten
PROBLEM SOLUTION
1. AERATOR
2. STRAINER
3. BOLT
Hex. Key
Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended.
Cap
Bolt
R7
Lavatory Hole Ø25
Faucet