elcord capability statement rev 11 july 2015
TRANSCRIPT
Elcord Capability Statement July 2015 2
Background We are a relatively new company that prides itself on being that. Even as our management team and staff have a long history of serving the Building, Mining and Construction Industries, it has been a new and rewarding experience to build this company with fresh thoughts and fresh ideas. Why choose Elcord? In short, because not only do you get the best quality and designs, but Elcord projects run more smoothly, saving you time and money. Elcord’s highly experienced management team have successfully delivered many of Western Australia’s most important construction projects. Our services can help you from the initial planning stage of your project to ensure your design will achieve the impact you desire, maintaining appropriate engineering standards, and be cost-effective to fabricate and install. Committed to Your Success Attention to Detail Flexibility and Choice Guaranteed Workmanship Value OHS and Environmental Policies: We have in place compliant Occupational Health and Safety and Environmental Policies and Procedures that are implemented throughout the company. Specialise in: Structural Steel Balustrade Commercial Glazing Cladding Metal Work Modular Housing
Elcord Capability Statement July 2015 3
Capacities & Capabilities
Workshops In 2013 we amalgamated three Workshops under one roof, to our newly built 2,600m2 workshops and offices at 15 Christable Way, Landsdale WA 6065
Operational employees We employ over 55 operational employees, including design, engineering, boilermakers, welders, stainless steel fabricators, glaziers, sheet metal workers, carpenters, crane drivers and riggers. The structural steel workshop is currently operating over two shifts.
Workshop/ Fabrication The workshops feature the following;
4 x 10 tonne gantry cranes
130Ton Press Brake and Guillotine up to 8mm plate
1000mm jaw opening Band Saw, capable of mitre cutting in both directions
500mm jaw opening Bandsaw
300mm plate width capacity Punch and Shear, plate up to 25mm thick
Pipe, tube and bar rollers
Plate roller
Numerous 400+ Amp welders
Automated glass cutting table - 4000mm x 4000mm Air Flotation Table with 6 tonne capacity free fall racks
Glass edge polishers
Bench saws
Circular saws
Routers
Lathes
Mills
8Ton Truck
Cutting, punching and forming Much of this work is completed in-house and, where required, outsourced to quality specialists.
Elcord Capability Statement July 2015 4
Welding processes We employ our own in-house Welding Supervisor, and Production Systems Manager.
NDT All Non Destructive Testing (NDT) is outsourced to a NATA endorsed inspection company. We offer the following welding processes: •GMAW and GMAW Pulse •Flux Cord Arc Welding (FCAW) •Manual Metal Arc Welding (MMAW) •Gas Tungsten Arc Welding (GTAW) – (TIG)
Mobile crane capacity
2.9 Tonne Maeda Mini Crawler Crane MC 305C
2.8 Tonne Maeda Mini Crawler Crane MC 285
Subject to individual requirements and job specifications, mobile cranes brought in to suit each project.
Site work We have our own specialised site installation teams; made up of qualified installers to handle all aspects of the site installation, be it erecting structural steel, glass, curtain walling, stick systems, aluminium, or stainless steel. Elcord has a full complement of mobile plant and equipment, which insures prompt mobilisation.
Surface treatment We use external painting contractors who are fully accredited and conform to ISO 9001:2008 standards.
Drafting division Elcord employs in-house drafts people. Our experienced and professional drafting staffs use the latest 3D software. Elcord Pty Ltd has access to a network of professional external drafts people.
Quality Assurance/ Accreditation Elcord is always working to improve quality assurance and accreditation systems. Elcord does offer full compliance reports, such as;
Coating Inspection Reports
Material Test Certificates
Weld Inspection Reports
Weld Procedures Qualification Reports
Welding Procedures Specification
Mill certificates
100% traceability of all fabrication & installation
Elcord Capability Statement July 2015 5
Current & Previous Project Experience
Project Name Scope of Work Value ($)
City Square Structural Steel / Glazing / Cladding $15,000,000
Fiona Stanley Hospital Structural Steel / Metal Work / Glazing $8,500,000
Perth City Link Structural Steel / Metal Work $3,000,000
Fiona Stanley Hospital, Bldg D Glazing Internal and External $1,300,000
Joondalup Hospital Glazing $1,600,000
541 Hay Street Structural Steel / Cladding $1,100,000
Leighton Beach Metal Work $1,000,000
Pro Build, Cockburn Central Balustrading $800,000
Cataby Abattoir Structural Steel $800,000
Notre Dame University Glazing / Structural Steel $700,000
Cannington Medical Centre Structural Steel / Glazing $360,000
226 Adelaide Terrace Metal Work $350,000
32 Henry Street (Apartments) Glazing / Louvers $300,000
Venn Art Gallery Structural Steel / Glazing / Metal Work $280,000
Optima Office Structural Steel / Glazing / Metal Work $240,000
BHP Housing Metal Work $180,000
Coolbelup Library Glazing $180,000
QEII Car Park Structural Steel / Metal Work $1,600,000
Butler Railway Station Structural Steel $2,500,000
One40William Stage 2 Structural Steel / Glazing / Metal Work $1,960,000
Midland Health Campus Façade Works $11,260,000
Cloisters on Hay Canopies / Glazing / Metal Work $1,050,000
Cockburn Gateway Shopping City Stage 3 Canopies / Glazing / Metal Work $2,260,000
999 Hay Street, Perth Structural Steel / Viewing Platform $768,000
Brookfield Place Tower 2 Podium Façade & Footbridge $6,017,000
New Children’s Hospital Block G Link Bridge $3,380,000
Elcord Capability Statement July 2015 6
Cladding
& Metal Works
Structural Steel
& Commercial Glazing
Elcord Capability Statement July 2015 10
Contact Details:
Elcord Construction Pty Ltd 15 Christable Way
LANDSDALE WA 6065
Phone: (08) 9406 1500 Fax: (08) 9406 1555
Email: [email protected]
Web: www.elcord.com.au
ABN: 56 131 885 464
ACN: 131 885 464
Insurance Details: $20,000,000 Legal Liability $20,000,000 Products Liability $5,000,000 Professional Indemnity
National Code of Practice for the Construction Industry Compliant
Member of Chamber of Commerce and Industry WA (CCIWA)
Elcord Enterprise Agreement 2013