electric actuator & valve - automa-int

ELECTRIC ACTUATOR & VALVE

www.automa-int.com

VER 0315.03

2

ROTARY ACTUATOR

Hard anodized Aluminum casting and external epoxy powder coated against severe industrialenvironment.

Sealed by O-ring in all interfaces, and double o-ring sealing for IP68(option)

EP type grease, maintenance free service for a long period time

Difference size depending on actuator torque, and knob on hand wheel for easy operation

Precisely machined double worm gear c/w minimum back-lash, low noise, high output torque

Provided by double worm gearing to keep position of valve unchanged against reverse torque fromvalve

● Housing

● Sealing

● Lubrication

● Hand wheel

● Gear

● Self locking

3

ROTARY TYPE ACTUATOR

External mechanical stopper- To prevent over run of travel angle when limit switch fails

Cable entries- Standard 2 X PF 3/4″(Max 1″) cable entry for various

cable gland

Manual override- Auto/Manual switch able lever hand wheel engagement for

emergency manual operating- Drive force automatically resorted by motor start unless

lever padlock to prevent it

Removable drive bushing andISO5211 mounting base- Easy machining for step adaption- Standard ISO5211 mounting base(F03 ~ F16)for easy mounting on valve

- Large size drive bushing accept large valve stem

Terminal block- Specially designed induction motor generate high starting

torque and high efficiency equip with thermal protector toprevent damage from over heating

Space Heater- Anti-condensation equip with thermal

4

ROTARY TYPE ACTUATOR

Captive cover bolt- Cover bolts are captive type designed to prevent loosing

during maintenance or installation

- All external bolts are stainless steel for rust prevention

Torque switches(Open/Close)- To protect actuator from damage caused by overload from

the driven valve over the whole travel

Potentiometer kit(PK)- High resolution potentiometer and precisely machined

gearing are directly engaged with drive shaft to feedbackcontinuous position of valve

Limit switches- Directly engaged with driving shaft to set accurate position

of valve- 1 ea for each travel end (open/close)- Optional Extra Limit Switches

(Max 4 ea for each end)

Indicator position with arrow supported Byspring- Large size position directly engaged with driving shaft for

better visibility from a distance- Spring loaded underneath keeps set position unchanged

unless used move it

5

ELECTRIC ROTARY TYPE ACTUATOR

● Technical Information

ModelRatedtorque

Nm %

Oper.time

50/60Hz90。

Dutycycle

Max boresizemm

Motor insula-

tion class

Rated current (A) 50/60Hz

1Phase 3Phase DC

110V 220V 380V 440V 24V Kg90。

No ofturns

Weight

▶Small ATM-Series

ATM0020

ATM0040

ATM0080

25

40

80

50

50

50

1

3

7

N/A

7.5

7

3.0

3.5

2.9

E

E

E

□9×9

□14×14

□17×17

11

14/12

16/14

0.28/0.40

0.30/0.42

0.17/0.16

0.03/0.31

0.32/0.33

0.18/0.17

0.26/0.25

0.29/0.28

0.48/0.46

0.45/0.44

0.49/0.48

0.92/0.88

▶Large ATM-Series

ATM6000

ATM9000

6000

9000

30

30

152

152

39

39

-

-

F

F

Ø120

Ø120

□100

□100

178/149

178/149

2.3/2.2

2.5/2.4

1.5/1.8

1.6/2.0

2.95/3.15

3.75/3.85

-

-

▶Regular-ATM-Series

ATM0100

ATM0160

ATM0240

ATM0350

ATM0500

ATM0800

ATM1100

ATM2000

ATM3000

100

160

240

350

500

800

1100

2000

3000

40

30

30

30

30

30

30

30

30

7

15

15

20

20

25

25

42

42

10

12

12

14

14

17

17

13

13

2.8

1.8

2.4

3.8

5.0

-

-

-

-

F

F

F

F

F

F

F

F

F

Ø22

Ø25

Ø25

Ø40

Ø40

Ø48

Ø48

Ø75

Ø75

□20

□23

□23

□34

□34

□40

□40

□64

□64

21/18

26/22

26/22

31/26

31/26

39/32

39/32

59/50

59/50

0.59/0.42

0.30/0.32

0.32/0.35

0.32/0.31

0.55/0.58

0.82/0.88

0.84/0.88

2.3/2.2

2.5/2.4

0.43/0.33

0.30/0.30

0.32/0.32

0.30/0.30

0.52/0.56

0.82/0.88

0.84/0.90

1.5/1.8

1.6/2.0

0.52/0.58

0.85/0.90

0.87/0.90

0.93/0.89

2.50/1.60

2.05/2.20

2.15/2.30

2.95/3.15

3.75/3.85

0.98/1.10

1.60/1.70

1.62/1.72

1.75/1.68

3.60/3.90

3.90/4.20

3.90/4.30

-

-

● Standard Specification

Enclosure

Main Power supply

Control power supply

Duty cycle (on-off)

Duty cycle (modulating)

Motor

Limit switches

Torque switches

Stall protection/set temp.

Travel angle

Position indicator

Manual override

Self locking

Mechanical stopper

Space heater

Cable entries

Lubrication

Terminal block

Ambient temperature

Ambient humidity

Anti vibration

External coating

Weatherproof IP67, NEMA 4X and 6, O-ring sealed (ATM0020&ATM0040:IP66)

24VDC, 110/220VAC/1Ph/50/60Hz, 380/440VAC/3Ph/50/60Hz ±10%, (ATM0020&ATM0040:1Phase)

110/220VAC/1Ph/50/60Hz ±10%

S2 : 10min ~ 30min

S4 : 30 ~ 50%, 300 ~ 1200 start/hour

Squirrel cage induction motor

2 each for open and close(SPDT 250VAC/10A rating)

2 each for open and close(SPDT 250VAC/10A rating except for ATM0020/0040/0080/0100)

Built in thermal protection, open 150℃±5℃, close 97℃±15℃

90。± 5。(0。~100。)

Continuous mechanical indicator with arrow

De-clutchable (except for ATM0020 : N/A, ATM0040 : by shaft, ATM0080 : by wrench)

Provided by double worm gearing (no brake) (except for ATM0020/0040/0080)

1 each for each travel end (open and close), external adjustable (except for ATM0020/0040)

5W(110/220VAC) for anti condensation

2-PF3/4” TAP except for ATM0020:1-PG11, ATM0040:2-PG13.5, ATM0080:2-M20X1.5

EP type grease

screw and lever push type(spring loaded)

Basic actuator : -20℃ ~ +70℃ except for ATM 0020: -10℃~ +65℃ c/w control option: -10℃~ +60℃

90%RH Max(Non-condensing)

XYZ 10g. 02 ~ 34 Hz, 30 minutes

Dry powder(Polyester), Blue Color, Munsell No. B-0188

6


Potentiometer Kit(output signal:0~1kohm)

High resolution potentiometer and precisely machined gearing

are directly engaged with drive shaft to feedback

continuous position of valve

Current Transmitter(output signal:4~20mA)

Zero/Span Adjustment

Convertible DIP switch(4 wire to 2 wire)

Remote Position Controller(by input and output signal)

Input:4~20mA, 0~10VDC, 2~10VDC, 1~5VDC, 0~5VDC

Output:4~20mA, 0~10VDC, 2~10VDC, 1~5VDC, 0~5VDC

Auto calibration

Reverse operating direction

● Options Available

Symbol

EX

WT

ALS

ATS

EXT

SV

Description

Explosion proof(Exd IIB T4)/Approved by KTL

Watertight(IP68), Temporary submersible/10M Head 1000hours

Auxiliary limit switches(Max 2 for each travel end)

Auxiliary torque switches(Max 2 for each travel end)

Extended travel angle(up to 120。, 135。, 180。, 270。)

Variation in torque and operating speed

Remark

Except for ATM0020/0040/0080

Except for ATM0020/0040/0080

Except for ATM0020/0040

Except for ATM0020/0040/0080/0100

Except for ATM with Large ATM-Series

Please consult before ordering

▶Mechanical

PK

CT

RPC

/Signal

configulation

▶Remote monitoring and control

LP4 / LM4 LP4 for 1 & 3Phase(ATM0160~9000)

Control power : Free Voltage(85~265VAC)50/60Hz, Option:24VDC

Magnetci slector switches, SMPS(Switching Module Power Supply)

:Open/Close & Local/Stop/Remote

Local lamp indication

:Power-White(on), Remote:Blue(on)

:In case of Close Torque Switch Trip-

Yellow(on)+Green(flickering:only at Local Position)

:In case of Open Torque Switch Trip-

Yellow(on)+Red(flickering:only at Local Position)

:Full Close-Green(on), Closing-Green(flickering:only at Local Position)

:Full Open-Red(on), Opening-Red(flickering:only at Local Position)

※ Options Available:PK, CT, RPC(Modulating), IP68, Explosion proof

LM4 for 3 Phase(ATM0160~9000)

Including the same function as LP4

Revesing electric contactors, Transformer

▶Local control

PK CT

RPC

LP4 / LM4

7


ICM1 for 1 & 3 Phase(Integral Control Module)(ATM0160~9000)

Main Power : 3Ph 220V/380/440 VAC

1Ph 110V/220 VAC

Control Power : 24 VDC, 5 VDC

Magnetic selector switches

:Open/Close & Local/Stop/Remote

Reversing electric contactors, Transformer, Phase Detector

Local lamp indication

:Power-White(on), Remote:Blue(on)

:In case of Close Torque Switch Trip-Yellow(on)+Green(flickering)

:In case of Open Torque Switch Trip-Yellow(on)+Red(flickering)

:Full Close-Green(on), Closing-Green(flickering:only at Local Position)

:Full Open-Red(on), Opening-Red(flickering:only at Local Position)

:Single & Revese Phasing:(Yellow+Green+Red)all flickering

※ Options Available:Explosion proof, IP68

ICM2 for 1 & 3 Phase(Integral with LCD Display)(ATM0160~9000)

Including the same function as ICM1


Auto-PhaseDiscriminator, LCD Display

※ Options Available:CT, RPC(Modulating), Explosion proof

※ Options Available:IP68, Bus Communication

ICM3 for 1 & 3 Phase(Integral with LCD Display/IP68 Enclosure)(ATM0160~9000)

Including the same function as ICM2


Auto-PhaseDiscriminator, LCD Display, IP68, Explosion proof

RPC(Modulating), Bus Communication

34pins separate compartment for terminal block

▶Fail Safety

BP for 1 Phase(ATM0160~9000)

Rechargeable Battery back up-Fail Safe function

When main power is alive, actuator works as normally

Once power fails, actuator will move to pre-set fail safe position

Input power-Free Voltage(85~265 VAC) 50/60Hz

Output contacts:Open/Close/Alarm relay

LED signal indication:4 LEDs(Full Open/Close, Over Torque and Power)

Rechargeable battery:2.0 AH 27.5 VDC(Ni-Cd)

▶Local control

ICM1

ICM2

8


● Dimensions

ATM0020 ATM0040 ATM0080

9


● Dimensions

ATM0100, ATM0160, ATM0240, ATM0350 ATM0500, ATM0800, ATM1100, ATM2000, ATM3000

ATM6000, ATM9000

10


ATM0100

ATM0160/0240

ATM0350/0500

ATM0800/1100

ATM2000/3000

ATM6000/9000

RPC

X Y Z

340 190 245

○

○

○

○

○

CT

X Y Z

316 172 245

○

○

○

○

○

BP

X Y Z

396 172 245

475 229 259

494 244 288

×

×

×

LP4/LM4/ICM1/ICM2

X Y Z

×

499 229 259

518 244 288

541 284 313

600 375 385

677 417 668

LD2

X Y Z

×

517 284 259

536 284 288

559 284 313

620 375 385

697 417 668

*O : Installed inside of actuator *X : Not available *Z : Height of basic actuator

ATM 0100 ATM 0160~9000

11


● Typical Wiring (ATM 0040~0080)

110/220VAC, 50/60Hz, 1Ph(On-off)

110/220VAC, 50/60Hz, 1Ph(On-Off) 110/220VAC, 50/60Hz, 1Ph(Modulating:RPC)

ATM0020 ATM0040

ATM0080 ATM0080(RPC)

110/220VAC, 50/60Hz, 1Ph(On-off)

12


110/220VAC, 50/60Hz, 1Ph(On-Off)

110/220VAC, 50/60Hz, 1Ph(Modulating:RPC)

ATM0100 ATM0100(3Ph)

ATM0100(RPC)

380/440VAC, 50/60Hz, 3Ph(On-Off)

● Typical Wiring (ATM 0100)

CLS : Close Limit Switch (250VAC 10A)

OLS : Open Limit Switch (250VAC 10A)

ACLS : Aux. Close Limit Switch (250VAC 10A)

AOLS : Aux. Open Limit Switch (250VAC 10A)

ACTS : Aux. Close Torque Switch (250VAC 10A)

AOTS : Aux. Open Torque Switch (250VAC 10A)

TP : THERMAL PROTECTOR (250VAC 15A OPTION)

* Each actuator should be powered through its own

individual switch or relay contacts to prevent cross feed

between two or more actuators.

13



110/220VAC, 50/60Hz, 1Ph(On-Off)

110/220VAC, 50/60Hz, 1Ph(Modulating:RPC)

ATM0160~9000 ATM0160~9000(3Ph)

ATM0160~9000(RPC)

380/440VAC, 50/60Hz, 3Ph(On-Off)

CLS : Close Limit Switch (250VAC 10A)OLS : Open Limit Switch (250VAC 10A)ACLS : Aux. Close Limit Switch (250VAC 10A)AOLS : Aux. Open Limit Switch (250VAC 10A)ACTS : Aux. Close Torque Switch (250VAC 10A)AOTS : Aux. Open Torque Switch (250VAC 10A) TP : THERMAL PROTECTOR (250VAC 15A OPTION)* Each actuator should be powered through its ownindividual switch or relay contacts to prevent cross feedbetween two or more actuators.

14


110/220VAC, 50/60Hz, 1Ph(CT)

380/440VAC, 50/60Hz, 3Ph(CT)

ATM0100(CT CARD)

ATM0160~9000(CT CARD, 3PH)

ATM0160~9000(CT CARD)

110/220VAC, 50/60Hz, 1Ph(CT)


CLS : Close Limit Switch (250VAC 10A)

OLS : Open Limit Switch (250VAC 10A)

ACLS : Aux. Close Limit Switch (250VAC 10A)

AOLS : Aux. Open Limit Switch (250VAC 10A)

ACTS : Aux. Close Torque Switch (250VAC 10A)

AOTS : Aux. Open Torque Switch (250VAC 10A)

TP : THERMAL PROTECTOR (250VAC 15A OPTION)

* Each actuator should be powered through its own

individual switch or relay contacts to prevent cross feed

between two or more actuators.

15

ELECTRIC LINEAR ACTUATOR

● AQL Electric Linear Actuator

LeverPadlockable, switchableauto/manual lever for easy operation

Stroke Scale

Indicator

Digital Display unit(Option)

Handwheel

Disc spring arrangementProviding accurate setting force andtight shut up for closing

Folding stackDrive shaft protection

Mounting Coupler

HousingHard anodized aluminum alloy housing external powdercoating against corrosive industrial environment

Pillar

Valve Stem

Automa designs, produces and provides high quality electric actuator and services

related to industrial valve automation and controls.

AQL series linear actuator has been developed for a wide range of linear applications and to service reliable

performance, long trouble free operation, more flexibility and maximized ability to integrate fully into sophisticated

control system.

16


● Robust construction, precise positioning, reliable performance

● Wide range of application

● Compact internal Arrangement

● Modulating control options can be instaled on site

● Local control options for easy commissioning and

emergency operation in the field

Electric Operation- On-off

Modulating control- 4-20mA / input / output- 0-10 V or other signal selection- Transmitter output 4-20 mA

Seals & O-rings- protection to water proof IP67

Terminal

Simple and easier handling and adjustment of Limit &Signal switches

Indicator

Coupler

Pillar

17


● Technical Information

● Standard Specification

AQL04 4 40 0.7/0.9 0.45/0.44 0.26/0.25 0.30/0.31 0.28/0.40 3.00 Max. M20 100 M16 7

AQL06 6 60 0.7/0.9 0.49/0.48 0.29/0.28 0.32/0.33 0.30/0.42 3.50 Max. M20 100 M16 8

AQL08 8 50 0.9/1.1 0.92/0.88 0.48/0.46 0.18/0.17 0.17/0.16 2.90 Max. M20 100 M16 15

AQL10 10 50 0.9/1.1 0.95/0.91 0.50/0.48 0.19/0.18 0.18/0.17 3.20 Max. M20 100 M16 16

AQL12 12 50 0.9/1.1 0.98/0.94 0.52/0.50 0.20/0.19 0.19/0.18 3.50 Max. M20 100 M16 16

AQL20 20 100 0.9/1.1 1.75/1.68 0.93/0.89 0.30/0.30 0.32/0.31 6.00 Max. M24 165 M20 20

AQL25 25 100 0.9/1.1 1.80/1.72 0.95/0.92 0.32/0.32 0.34/0.33 7.00 Max. M24 165 M20 21

Model

Max.Force

Max.Stroke

Speed50/60Hz

ValveStem

Threads

PCD on

FlangeWeight

Rated Current(A)

50/60Hz

KN mm mm/sec1 Phase

110V 220V 380V 440V 24V

DCmm mm kg

3 Phase

Manual Override Handwheel with switchable declutchable lever

Enclosure (EN60529) IP67

Cable Entry 2 × PF 3/4” TAP

Position Indication Scale on pillar pointed by indicator

Housing Aluminum alloy hard anodized for anti-corrosion

Painting Epoxy power coated

Ambient Temperature -20℃ ~ +70℃

Operating Mode (EC34-1, 8) S2-Max. 30 Min / S4-50% ED, 800 c/h / S4-50% ED, 1200 c/h

Motor Protection Thermal Switch, Class F Insulation

Space Heater 5W (110/220VAC) for anti condensation

Limit Switch 1 each for open/close (SPDT 10A 250VAC rating)

Mounting Direction Any direction except for heading downward

Pillar Material Stainless steel, carbon steel with special surface treatment

Available Optional Control

- Remote position control RPC 4~20mA input/output, Selectable other signal

- Potentiometer PK 0~1Kohm feedback

- Current transmitter CT 4~20mA output

Local control

- Local control (1 Phase) LP4 Local control unit

- Local control (3 Phase) LM4 LP4 with reversing contactor and transformer

- Integral unit ICM Local controller with phase detector / discriminator

- Battery back up unit BP Fail Safe (Fail position either open/close)

- Explosion proof EX Exd IIB T4

● Option Specification

- Auxiliary limit switch ALS1 each for open/close (SPDT 10A 250VAC rating) (Except for AQL04/AQL06)

Pillar

Threads

18

ELECTRIC LINEAR ACTUATOR AQL04/06

Dimensions(mm)

Setting closing(opening) force

Standard wiring

F : Closing(opening) force S : Amount of disc spring compression

1PH WIRING DIAGRAM 1PH+RPC WIRING DIAGRAM 3PH+RPC WIRING DIAGRAM

AQL04 AQL06

Disc spring arrangement

Correct mounting direction

19

ELECTRIC LINEAR ACTUATOR AQL08/10/12

Dimensions(mm)


Standard wiring



AQL08 AQL10 AQL12



20

ELECTRIC LINEAR ACTUATOR AQL20/25

Dimensions(mm)


Standard wiring



AQL20 AQL25



ELECTRIC 1 PIECE BALL VALVE

Application■ Water Distribution pipes.■ Industrial Cleaning Machines.■ Sterilizers, Boilers■ Air Conditioners , Water Filters■ Medical Equipments, Vacuum Packing

● Dimension (mm)

● Specification

Valve Size

Actuator Model

Actuator Type

Electrical

Output Torque

Operating time

Operating Type

Rotating Angle

Fluid Temp

Rating

Body Material

Electric

AC110V, 220V

ON-OFF

1000Psi

10A(3/8″) 15A(1/2″) 20A(3/4″) 25A(1″) 32A(1-1/4″) 40A(1-1/2″) 50A(2″)

ATM0020-10S1

ATM0020-15S1

ATM0020-20S1

ATM0020-25S1

ATM0040-32S1

ATM0040-40S1

ATM0040-50S1

10A

15A

20A

25A

32A

40A

50A

SizeModel

3/8″

1/2″

3/4″

1″

1-1/4″

1-1/2″

2″

89.4

89.4

89.4

89.4

113.5

113.5

113.5

A

109.7

109.7

109.7

109.7

121.8

121.8

121.8

A1

156.5

168.5

188.5

192.5

200

200

200

H(APPROX.)

45

56.5

59

71

78

83

100

L

7.7

9.2

12.5

15

20

25

32

Ød

END CONNECTION(PT SCREW) Motor

SUS316 / BODY SUS316 / BALL PTFE / SEAT

ATM0040 ATM0020

40Nm25Nm

11/50Hz, 60Hz

90。±5。

-10℃~ +65℃

90。±10。

-20℃~ +70℃

14/50Hz, 12/60Hz

21

22

ELECTRIC 3 PIECE BALL VALVE

Application■ Water Distribution pipes■ Industrial Cleaning Machines■ Sterilizers, Boilers■ Air Conditioners , Water Filters■ Medical Equipments, Vacuum Packing

● Specification

Valve Size

Actuator Model

Actuator Type

Electrical

Output Torque

Operating Type

Rotating Angle

Fluid Temp

Rating

Body Material

Operating time

Electric

AC110V, 220V

10A(3/8″)8A(1/4″) 15A(1/2″) 20A(3/4″) 25A(1″) 32A(1-1/4″) 40A(1-1/2″) 50A(2″)

SUS316 / BODY SUS316 / BALL PTFE / SEAT

ATM0080

80Nm

16/50Hz,

14/60Hz14/50Hz, 12/60Hz11/50, 60Hz

(mm)● Dimension

ATM0020-8S3

ATM0020-10S3

ATM0020-15S3

ATM0020-20S3

ATM0040-25S3

ATM0040-32S3

ATM0040-40S3

ATM0080-50S3

8A

10A

15A

20A

25A

32A

40A

50A

SizeMotor

Model

1/4″

3/8″

1/2″

3/4″

1″

1-1/4″

1-1/2″

2″

89.4

89.4

89.4

89.4

113.5

113.5

113.5

160

A109.7

109.7

109.7

109.7

121.8

121.8

121.8

121

A1173.5

173.5

173.5

173.5

216

227

231

218

H(APPROX.)

60

60

65

75

81

94.5

108

121.5

L

8

10

15

20

25

32

40

50

Ød

END CONNECTION(PT SCREW )

ATM0040ATM0020

20Nm 40Nm

-20℃ ~ +70℃

1000Psi

ON-OFF

90。±5。

-10℃ ~ +65℃

90。±10。

ON-OFF MODULTING SAME LEFT

23

ELECTRIC FLANGE BALL VALVE

Application■ Water distribution pipes■ Industrial cleaning machines■ Sterilizers, Boilers ■ Air conditioners, Water filters■ Medical equipments, Vacuum packing■ Food & Beverage lines■ Vacuum distribution pipes

● Dimension

Valve Size

Actuator Model

Actuator Type

Electrical

Rotating Angle

Operating Type

Fluid Temp

Rating

Body Material

Electric

AC110V 220V, AC380V 440V

90。±5。

ON/OFF, MODULATING(Except for ATM0040)

-20℃ ~ 70℃

JIS10K (20K) (40K) ANSI150# (300#) (600#)

SCS13 (SCS14)/Body SUS304 (SUS316)/Ball PTFE(RTFE PEEK, METAL)/Seat

※ ( ) Option

15A ~ 350A

ATM0040 ~ ATM3000

Model

(mm)

SizeA A1

● Specification

ATM0040-15FATM0040-20FATM0040-25FATM0040-32FATM0040-40FATM0080-50FATM0160-65FATM0160-80FATM0350-100FATM0500-125FATM0500-150FATM1100-200FATM2000-250FATM3000-300FATM3000-350F

15A20A25A32A40A50A65A80A100A125A150A200A250A300A350A

113.5113.5113.5113.5113.5160338338357357357380440440440

121.8121.8121.8121.8121.8121229229244244244287375375375

233236245248269256406482492547543645813875951

-----

40115115145145145170225225225

108117127140165178190203229356397457533610686

121414161616181818202222242426

1520253240506580

100125150200250300350

5258708085100120130155185215265325375415

707590

100105120140150175210240290355400445

95100125135140155175185210250280330400445490

4-154-154-194-194-194-194-198-198-198-238-2312-2312-2316-2516-25

1/2″3/4″1″

1-1/4″1-1/2″

2″2-1/2″

3″4″5″6″8″10″12″14″

Motor END CONNECTION(JIS 10K RF)H(Approx) H2

T Ød ØRF ØC ØD N-ØHL±1.6

24

ELECTRIC BUTTERFLY VALVE

Application■ Water distribution pipes■ Industrial cleaning machines■ Sterilizers, Boilers ■ Air ventilation■ Medical equipments, Vacuum packing■ Air ventilation systems

Valve Size

Actuator Model

Actuator Type

Electrical

Rotating Angle

Operating Type

Fluid Temp

Rating

Body Material

Electric

AC110V 220V, AC380V 440V

90。±5。

ON/OFF, MODULATING(Except for ATM0040)

-20℃~±70℃

JIS10K Wafer ANSI150# Wafer

FC (SCS13)/Body SCS13 (SCS14)/Disc EPDM (MTFE)/Seat

※ ( ) Option

40A ~ 1000A

ATM0040 ~ ATM3000

● Specification

● Dimension

Model Size A A1H1 H2 L

ØD ØC N-ØHEND CONNECTION(JIS 10K WAFER)H

(APPROX.)

(mm)

ATM0040-40BFATM0040-50BFATM0080-65BFATM0080-80BFATM0100-100BFATM0160-125BFATM0240-150BFATM0350-200BFATM0500-250BFATM0800-300BFATM0800-350BFATM1100-400BFATM2000-450BFATM2000-500BFATM3000-600BF

40A50A65A80A100A125A150A200A250A300A350A400A450A500A600A

1-1/2″2″

2-1/2″3″4″5″6″8″10″12″14″16″18″20″24″

113.5113.5160160258338338357357380380380440440440

121.8121.8121121172229229244244244287287375375375

263270268278418472489581608660669713836900985

58657183100110130163227252272343366421493

--

4040

100115115145145170170170225225225

4143464652565660687878

102114127154

86105114129155180207260331377416475535590695

105120140150175210240290355400445510565620730

4-194-194-198-198-198-238-2312-2312-2516-2516-2516-2720-2720-2724-33

Actuator

25

ELECTRIC LINEAR TYPE ACTUATOR (ON/OFF)

Very excellent to generate various thrust by accelerating gear and power supplyequipment which using the turning power of synchronous motor.It is usually used with 2-WAY and 3-WAY globe valves for Heating.Ventilating. Air Conditioning, plant.

A. Robust DesignB. EnclosureC. Reliable Operating

General

Model

Storke (mm)

Output Torgue (N)

Operating Time (Sec)

Power Supply

Rated Load (A)

Condenser (μF)

Rated Current (VA)

Control Signal

Control Output

Motor effic.

Ambient Temp.

Housing protection

Conduit Entries

Weight (Kg)

0.5 (0.075)

34 (0.474)

12 (16.5)

2.1 (0.25)

150, (5)

51, (55)

※ ( ) Option

20 40 70 80

● Specification

3, (0.35)

210, (5)

72,(77)

(1)

(6)

(220)

2.4 3.2 3.3 10.4 11.6 21.3

AGE-10 AGE-20 AGE-35 AGE-55 AGE-100 AGE-250

1000 2000 3500 5500 10000 25000

50 50

24V (220V) AC. ±10%

CW / CCW

- Option (2*Open/Close 3A) (2*Open/Close 10A)

S4 - 30% ED - 600c/hr

-15℃ ~ 60℃

220V (110V)

100 94 94 210

IP54 (EN60529)

PF 1/2 × 2EA

IP65 (EN60529)

Cap Screws

Cap

Terminal Box

Linkage Frame

Manual Handle

Coupling Piece

Quick MountClamp jaws

● Design Feature•Assembling actuator and valve requires neither special tools nor adjustments•Blocking proof geartrain with self-lubricating bearings•Manual operation with automatic resetting to control operation

(When motor operate, Manual handle returns to its own position for electric operation)

26

ELECTRIC LINEAR TYPE ACTUATOR

● Dimension

● Wiring Diagram

AGE-10

ΦB

AGE-20

AGE-35

AGE-55

AGE-100

AGE-250

Model

208

295

330

355

585

665

H

62

90

90

100

100

120

E

62

125

125

135

170

200

G

81

106

130

125

195

250

D

111

185

185

215

330

445

F

168

140

140

160

180

270

(mm)

TERMINAL BLOCK

OPEN(Down)

COM

CLOSE(Up)

Field Wiring

AC Power24V or 220V

Actuator Wiring

Close Torque Limit

Motor

Open Torque Limit

27

ELECTRIC LINEAR TYPE ACTUATOR (CONTROL)

Very excellent to generate various thrust by accelerating gear and power supplyequipment which using the turning power of synchronous motor.It is usually used with 2-PORT and 3-PORT globe valves for Heating.Ventilating. Air Conditioning, plant.

A. Manual Handle for Hand/Auto Switch System.B. Torque Switch for Protection from overloadC. Signal Output for Remote Control.D. Easy Transition for Normal Open/Normal Close.E. It is operated 24V AC voltage (0~10V DC / 4~20mA) or 220V AC (4~20mA or

0~10V DC)

General

Model

Storke (mm)

Output Torgue (N)

Operating Time (Sec)

Power Supply

Rated Torque (A)

Condenser (μF)

Rated Current (VA)

Control Signal

Output Signal

Motor effic.

Ambient Temp.

Housing protection

Conduit Entries

Weight (Kg)

0.5, (0.075)

34 (0.474)

12 (16.5)

2.1, (0.25)

150, (5)

51, (55)

20 40 70 80

● Specification

3, (0.35)

210, (5)

72, (77)

1

6

(220)

2.4 3.2 3.3 10.4 11.6 21.3

AGE-10P AGE-20P AGE-35P AGE-55P AGE-100P AGE-250P

1000 2000 3500 5500 10000 25000

50 50

24V (220V) AC. ±10%

(AC 24V : 0 ~ 10V / 4 ~ 20mA D.C) ( AC220V : 0 ~ 10V or 4 ~ 20mA D.C)

0 ~ 10V or 4 ~ 20mA D.C

S4 - 30% ED - 600c/hr

-15℃ ~ 60℃

IP 54 (EN60529)

220V AC ±10%

100 94 94 210

PF1/2 × 2EA

● Mounting and Installation Guide

(permitted) (Not permitted)

28


STANDARD (AGE-10P, 20P, 35P, 55P AC24V)

OPTION (AGE-20P, 35P, 55P AC24V)

(AGE-20P, 35P, 55P, 100P, 250P AC220V)

● Wiring Diagram

29


K0 : Volumetric flow 0%

K100 : Volumetric flow 100%

S : Signal (0~10V, 2~10V, 4~20mA d.c)

K100

K0

04

10V20mA

S

● Technical Features

AGE-10

ΦB

AGE-20

AGE-35

AGE-55

AGE-100

AGE-250

Model

208

295

330

355

585

665

H

62

90

90

100

100

120

E

62

125

125

135

170

200

G

81

106

130

125

195

250

D

111

185

185

215

330

445

F

168

140

140

160

180

270

(mm)● Dimension

30

ELECTRIC LINEAR TYPE VALVE (FLANGED)

The valve which controls two positions or proportion of cold/hot water,steam andair, The body and the seat are manufactured in castiron and the valvestem,seat,valve plug are in stainless steel.The stuffing box prevents leakage viaO-ring and teflon.

■ Technical DataOperating Pressure : JIS 10 Kgf/cm2

Operating Temp : -25 ~ 120℃Valve curve : Equal percentage or linearLeakage rate : ≤ 0.01% of Kvs value Class IV

■ ApplicationHot water : max 120℃Chilled water : -25℃ max. in closed circuit only water with following additives- Hydrazine, Phosphate, for frost protection. - Glycol, max 50%, for frost protection.- Saturated steam, superheated steam.

ΔPvmax in kgf/cm2=Max. permissible pressure difference across the valve at which the drive can stillsafely open and close the valve

ΔPsmax in kgf/cm2=Max. permissible pressure difference across the valve during malfunction at which thedrive can close the valve

(KV=Cv/1.167)

General

● Material

PartName

Material

NO

Body

FC20

1

Cover

FC20

2

PackingBox

VITON

Plug

SCS13

3

Stem

SUS304

4 5

AGE-15F

AGE-20F

AGE-25F

AGE-32F

AGE-40F

AGE-50F

AGE-65F

AGE-80F

AGE-100F

AGE-125F

AGE-150F

● Specification

DNModel

mm

15

20

25

32

40

50

65

80

100

125

150

inch

1/2″

3/4″

1″

1-1/4″

1-1/2″

2″

1-1/2″

3″

4″

5″

6″

Kv

3

5

10

16

25

39

65

91

130

188

283

Cv

3.5

5.8

11.7

18.7

29

45

75.8

106

152

219

330

FLOW Stroke

mm

20

20

20

20

20

20

20

20

40

40

40

50

50

50

50

50

50

50

50

50

50

50

∆Pv

PvmaxSv

AGE-35AGE-20

10

10

10

10

10

10

10

8

4

4

4

10

10

10

10

10

8

5

3

-

-

-

-

-

-

-

-

-

-

-

3.5

2

1.5

Actuator ∆Ps(Kgf/cm2)

31

ELECTRIC LINEAR TYPE VALVE (FLANGED)

AGE-15F

AGE-20F

AGE-25F

AGE-32F

AGE-40F

AGE-50F

AGE-65F

AGE-80F

AGE-100F

AGE-125F

AGE-150F

Model A C D E F B H2 H1

330

334

334

339

339

339

360

360

-

-

-

330

334

334

339

339

339

360

360

421

432

448

-

-

-

-

-

-

-

-

-

-

478

5.5

6

6.9

8.9

10

15

22

25

42

76

87

DNH

AGE-20 AGE-35 AGE-55

WeightValve(Kg)

● Valve sizing chart-size 15A ~ 50A

● Dimensions

15

20

25

32

40

50

65

80

100

125

150

130

150

160

200

200

230

290

310

350

400

480

95

100

125

135

140

155

175

185

210

250

280

16

18

18

20

20

20

22

22

24

24

26

70

75

90

100

105

120

140

150

175

210

240

15X4

15X4

19X4

19X4

19X4

19X4

19X4

19X8

19X8

23X8

23X8

69

75

75

97

97

147

180

186

205

238

279

67.5

67.5

67.5

67.5

67.5

67.5

67.5

67.5

92.5

92.5

92.5

75

80

77

74

74

70

83

73

129

118

140

▶FLOW DIAGRAM

V : WATER FLOW (㎥/h) ΔPv : VALVE PRESSURE DROP (Kgf/㎠)

(mm)

32

ACTUATORS INSTALLATION MANUAL-AC200V

■ It is recommended that the valves be mounted upright in an easily accessible location. The actuator

must be protected against dripping water, which could enter the housing and damage the

mechanism or motor.

■ How to connect the vallve and actuator

•Unfasten the coupling nut and insert in the valve shaft. <Figure 2- >

•Fit the coupling washer to the groove on the shaft. <Figure 2- >

•Fit the actuator to the groove on the valve body and then

fasten the actuator by using the hexagonal bolt.

Hexagonal wrench(6mm) needed. <Figure 2- >

•Tighten the coupling nut completely.

<Figure 1- >

■ Manual Operating

•The actuator is delivered with factory(auto) settings. Use when manual operating or power off.

<Figure 3>

•Turn right the Lever to clockwise(90°) and then turn the manual override slightly.

•When turning the manual override to clockwise, the shaft of the actuator come down and in case of

counterclockwise, the shaft go up. <Figure 3- >

After using it, turn the lever to clockwise(90°) and also turn the manual override slightly.

After that, use auto settings.

Manual Operation : Do not use when power on.

MODEL : AGE-SERIES

<Figure 1>

<Figure 3>

<Figure 4>

<Figure 2>

( 20P )

Coupling Washer

(35P,55P:Cutting required)

※ The product is subject to change for technical development and quality improvement without prior notice.

021502

(JB0247)

Automa Bldg. Ⅱ #35 , Bucheon-ro 168beon-gil,

Wonmi-Gu, Bucheon-City, Gyeonggi-Do, Korea

TEL : 82-(0)32-613-4800

FAX : 82-(0)32-613-4801

www.automa-int.com

electric actuator & valve - automa-int

Documents