electric drills and drive units - cs unitec€¦ · electric drills and drive units high-torque,...

5
ELECTRIC DRILLS AND DRIVE UNITS 1-800-700-5919 Visit our website at www.csunitec.com 57 Electric Drills and Drive Units High-torque, multi-geared and variable-speed motors Heavy-duty Drills for Industry and Construction: High-torque output Variable-speed, two- and four-geared drills for optimum speed selection Reversible motors and electronic torque control on selected models Ideal for special applications including valve turning, tube rolling and other jobs Safety slip clutch on 1 1 /4" capacities to protect operator and tool Drilling capacities up to 1 1 /4" in steel Special OEM motors available on request One-year warranty EHB 16/1.4 S EHB 16/1.4 S R/L EHB 16/2.4 SR/LC EAW 16/2 R/L EHB 20/2.4 EHB 32/4.2 EAU 34/4** EAU 36/4 R R/L with 4-speed gearbox and variable speed * All units available in 220 Volt / 50Hz ** EAU 34/4 available with control box (on/off, reverse) – order Model. No. EAU 34/4 CB ** EAU 36/4 R R/L available with control box – order Model. No. EAU 36/4 R R/L CB Special Motors available upon request. 7.3 9.6 10 9 10.5 15.5 20 22 Motor Power (Amps) 110V 110V 110V 110V 110V 110V 110V 110V Voltage* 5 /8" 5 /8" 5 /8" N/A 3 /4" 1 1 /4" Drilling Capacity in Steel 12 19 19 8 32 112 203 187 Max. Torque Output (ft./lbs.) NO YES YES YES NO NO YES YES Revers- ible 6.8 7 7 7 9.2 15.2 19.5 20 Weight (lbs.) 5 /8" Keyless 5 /8" Keyless 5 /8" Geared 5 /8" X 16 UN MT2 MT3 MT3 MT3 Chuck/Arbor 0-500 0-450 0-430/0-760 510/950 250/450 110/175/245/385 80/130/360/570 50-120 80-190 110-270 180-420 Load Speed (RPM) Model No. Model EHB 20/2.4 Model EHB 16/1.4 S Model EHB 16/2.4 S Model EHB 16/2.4 SR/LC Model EAU 34/4 CB Model EAU 36/4 R R/L Model EHB 32/4.2

Upload: others

Post on 06-Jun-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Electric Drills and Drive Units - CS Unitec€¦ · Electric Drills and Drive Units High-torque, ... EHB 32/4.2. S L O W-S P E E D E L E C T R I C D R I L L S A N D D R I V E U N

ELEC

TRIC

DRI

LLS

AN

D D

RIV

E U

NIT

S

• 1-800-700-5919 • Visit our website at www.csunitec.com 57

Electric Drills and Drive Units High-torque, multi-geared and variable-speed motors

Heavy-duty Drills for Industry and Construction:

• High-torque output

• Variable-speed, two- and four-geared drillsfor optimum speed selection

• Reversible motors and electronic torque controlon selected models

• Ideal for special applications including valve turning,tube rolling and other jobs

• Safety slip clutch on 11/4" capacitiesto protect operator and tool

• Drilling capacities up to 11/4" in steel

• Special OEM motors availableon request

• One-year warranty

EHB 16/1.4 S

EHB 16/1.4 S R/L

EHB 16/2.4 SR/LC

EAW 16/2 R/L

EHB 20/2.4EHB 32/4.2EAU 34/4**EAU 36/4 R R/L†

with 4-speed gearboxand variable speed

* All units available in 220 Volt / 50Hz ** EAU 34/4 available with control box (on/off, reverse) – order Model. No. EAU 34/4 CB

** EAU 36/4 R R/L available with control box – order Model. No. EAU 36/4 R R/L CB Special Motors available upon request.

7.3

9.6

10

9

10.5

15.5

20

22

MotorPower(Amps)

110V

110V

110V

110V

110V

110V

110V

110V

Voltage*

5/8"5/8"5/8"

N/A3/4"

11/4"

DrillingCapacityin Steel

12

19

19

8

32

112

203

187

Max.TorqueOutput(ft./lbs.)

NO

YES

YES

YES

NO

NO

YES

YES

Revers-ible

6.8

7

7

7

9.2

15.2

19.5

20

Weight(lbs.)

5/8" Keyless5/8" Keyless5/8" Geared5/8" X 16 UN

MT2

MT3

MT3

MT3

Chuck/Arbor

0-500

0-450

0-430/0-760

510/950

250/450

110/175/245/385

80/130/360/570

50-12080-190110-270180-420

Load Speed (RPM)

Model No.

ModelEHB 20/2.4

Model EHB 16/1.4 S

Model EHB 16/2.4 SModel EHB 16/2.4 SR/LC

ModelEAU 34/4 CB

ModelEAU 36/4 R R/L

ModelEHB 32/4.2

Page 2: Electric Drills and Drive Units - CS Unitec€¦ · Electric Drills and Drive Units High-torque, ... EHB 32/4.2. S L O W-S P E E D E L E C T R I C D R I L L S A N D D R I V E U N

SLO

W-S

PEED

ELE

CTR

IC D

RILL

S A

ND

DRI

VE

UN

ITS

• 1-800-700-5919 • Visit our website at www.csunitec.com58

Slow Speed: two-geared, variable-speed reversible motors

1/2" and 3/4" Square Driveaccessories allow motorcompatibility for variousdrive applications.*

Up to 11/4" twistdrill capacity

Model EHB 32/2.2 R/RLModel ETE 32/2.3 R/RL

Model ETE 32/2.3 R/RL(shown with optionalSquare Drive adapter)

• High-torque, two-geared and variable-speedreversible motors

• Ideal for drilling, reaming and tapping steel

• Driving applications include mills, spindles, barboring, pipe beveling and valve turning

• Perfect for tube rolling and expanding for fire tube and water tube boilers

• Mechanical safety clutch prevents operator injury ordamage to the tool

• Morse Taper #3 arbor

• One-year warranty

EHB 32/2.2 R/RL

ETE 32/2.3 R/RL

** All units available in 220 Volt / 50Hz*** With Expander (Up to 2 1/2" with Bead Roller)

* 1/2" Square Drive with MT3 – Part No. 830-1230-0503/4" Square Drive with MT3 – Part No. 830-1230-075

16.3

16.3

MotorPower(Amps)

110V

110V

Voltage**

11/4"

N/A

DrillingCap. inSteel

2"

3" ***

TubeRolling(max.)

YES

YES

Revers-ible

14

15

Weight(lbs.)

MT3

MT3

Arbor

92 max.

174 max.

TorqueOutput(ft./lbs.)

YES

NO

TorqueControl

60-140 /200-470

30-75 /90-230

LoadSpeed (RPM)

Model No.

Electric Drills and Drive Units

Page 3: Electric Drills and Drive Units - CS Unitec€¦ · Electric Drills and Drive Units High-torque, ... EHB 32/4.2. S L O W-S P E E D E L E C T R I C D R I L L S A N D D R I V E U N

ELEC

TRIC

DRI

VE

UN

ITS

/ SP

ECIA

L M

OTO

RS

• 1-800-700-5919 • Visit our website at www.csunitec.com 59

Special Electric Motor Options

Driving applicationsinclude mills, spindles,bar boring, tube rolling,valve turning and more.

Custom DesignOptions Include:� Forward/Reverse

� Variable Speeds

� Multiple Gears

� Spindle: MT or Special

� MultifunctionalControl Boxesor Handles

� 1/2 to 4 HP

� Modular Design

Contact us today toconfigure the motorthat meets your specificdriving applications.

Spindle Options: MT2 / MT3

Square Driveor Threaded

Gear Selection Knob

Holes for Mounting(Model EAU 34/4 only)

Control Boxeswith On/Off,

Variable Speed

Forward/Reverse Control

Electronic Torque Control

Variable-speed Dial

High-torque, reversible electric drill motors for custom applications

Page 4: Electric Drills and Drive Units - CS Unitec€¦ · Electric Drills and Drive Units High-torque, ... EHB 32/4.2. S L O W-S P E E D E L E C T R I C D R I L L S A N D D R I V E U N

PNEU

MA

TIC

DRI

LLS

AN

D D

RIV

E U

NIT

S

• 1-800-700-5919 • Visit our website at www.csunitec.com60

Pneumatic Drills and Drive UnitsHigh-torque reversible drilling and tapping machines

Model2 1261 0010

• High-torque reversible drilling, tapping and threading machines

• Ideal for drilling, reaming, tube rolling, tube expanding and tapping

• Use for special applications including mills, spindles, slides, controllers,pipe tapping, valve turning and more

• Drill chucks and Morse Taper arbors

• Hammer drills for drilling concretewith up to 2200 blows per minute

• Special OEM air motors available on request

• One-year warranty

Pistol Drills

2 1261 0010

Hammer Drills (for concrete and underwater applications)

2 1266 0010

D-handle Drills

2 1310 0010

2 1311 0010

Morse Taper Drills w/ Feed Spindle

2 2089*

2 2506*

2 2502*

* The last four digits of the Model No. identify the type of throttle.Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.

0.7

0.75

0.8

0.8

1.7

2.5

2.5

MotorPower(HP)

850

950

650

650

250

220

80

LoadSpeed(RPM)

1/2"

1/2"

1/2"5/8"

11/4"

11/4"

2"

DrillingCap. inSteel

N/A

N/A

N/A

N/A

1"

2"

21/2"

TubeRolling

Cap.

7 max.

7 max.

8 max.

8 max.

36 max.

63 max.

173 max.

TorqueOutput(ft./lbs)

93/4"

12"

121/2"

11"

261/2"

261/2"

261/2"

Length

N/A

N/A

N/A

N/A

15/8"

21/2"

21/2"

FeedLength

4.6

6.7

12

12

28

32

37

Weight(lbs.)

21

21

24

24

24

70

70

CFMat 90PSI

1/2" Chuck

1/2" Chuck

1/2" Chuck

MT1

MT3

MT3

MT4

Chuck/Arbor

NO

NO

NO

NO

YES

YES

YES

Revers-ibleModel No.

Model2 1310 0010

See page 62for Rotary

Hammer Drills

Pneumatic Pistol DrillsPneumatic Hammer Drills

Morse Taper Drills w/ Feed Spindle

D-handle Drills

Model2 2089 0030with reverse andsafety twist throttle

Model 2 1266 0010

ATEXATEX

Page 5: Electric Drills and Drive Units - CS Unitec€¦ · Electric Drills and Drive Units High-torque, ... EHB 32/4.2. S L O W-S P E E D E L E C T R I C D R I L L S A N D D R I V E U N

Corner Drills and Drives

CO

RNER

DRI

LLS

AN

D D

RIV

ES

• 1-800-700-5919 • Visit our website at www.csunitec.com 61

ATEXATEX

Pneumatic, electric and hydraulic: high-torque drilling, reaming and driving units

Model 2 1801 0030

• Small side-to-side distance for tight spaces• Self-closing roll throttle• Built-in oiler for motor• Ideal for bridge

reaming and drilling applications

• One-year warranty• Visit www.csunitec.com for dimensions

2 2081*

2 2087*†

2 2088*†

* The last four digits of the Model No. identify the type of throttle. † Square drive accessories available (see above). Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.

13/16"7/8"7/8"

SquareDrive

ID

413

413

138

TorqueOutput(ft./lbs.)

YES

YES

YES

Revers-ible

3"

3"

2"

TubeRolling

Cap.

11/2"

11/2"3/4"

TappingCap.

53

53

53

CFM at90 PSI

10.9" x 26.5"

10.9" x 26.5"

10.9" x 26.5"

Height xLength

29

29

29

Weight(lbs.)

1.35

1.35

1.35

MotorPower(HP)

20

20

60

LoadSpeed (RPM)

PneumaticDrive UnitModel No.

Nonreversible

2 1602 0030

2 1701 0030

2 1801 0030

Reversible

2 2104 0030

Model No. 2 1602 0030 has a 3/8" NPT air inlet. 1/2" (13mm) hose is recommended. All other models have 3/4" NPT air inlet. A 1/2" (13mm)hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.

#1

#2

#3

#4

MorseTaper

5/8"7/8"

11/4"

21/8"

Drilling(in steel)

N/A

N/A

N/A

2"

TubeRolling

Cap.

7

35

53

86

TorqueOutput(ft./lbs.)

500

270

260

180

LoadSpeed(RPM)

21

49

63

71

CFM at90 PSI

12.5"

20.9"

22.5"

23.8"

Length

7

19

25

37

Weight(lbs.)

0.7

1.8

2.6

3.0

MotorPower(HP)

1/2"5/8"

1"

2"

Reaming(in steel)

PneumaticCorner DrillModel No.

2 1806 0010 #3

MorseTaper

11/4"

Drilling(in steel)

N/A

TubeRolling

Cap.

60

Torque Output(ft./lbs.)

220

LoadSpeed(RPM)

4 GPM@2000

OilFlow/PSI

21"

Length

25

Weight(lbs.)

3.8

MotorPower(HP)

1"

Reaming(in steel)

HydraulicCorner DrillModel No.

EHB 32/2.2R/RL

16.3

MotorPower(Amps)

110

Voltage

11/4"

DrillingCap. inSteel

2"

TubeRolling(max.)

Yes

Revers-ible

Yes

TorqueControl

MT3

Arbor

14

Weight(lbs.)

92 max.

TorqueOutput(ft./lbs.)

60-140200-470

LoadSpeed(RPM)

Electric DrillModel No.

Corner Drills and Bridge Reamers

• Ideal for heavy-duty reaming, tubeexpanding and tapping

• Perfect for special driving applications,including pipe tapping and valve turning

Slow-speed, High-torqueStraight Drive Units

Model 2 2087 0010with reverse and lever throttle

Square Drive Accessories 2 2089 7020 – 7/8" Male Sq. Drive to 3/4" Male Sq. Drive2 2089 7070 – 7/8" Male Sq. Drive to 1" Male Sq. Drive6 1016 7940 – 7/8" Male Sq. Drive to 1" Male Sq. Drive

with retaining pin