electric - thermaq€¦ · products promptly and as an engineer you can quickly respond to your...
TRANSCRIPT
Electrical Water Heaters and Cylinders suitable for a comprehensive range of hot water requirements.
ElEctricWater HeatINGPRODUC T.GUIDE
EXCELLENCE IN HOT WATER TECHNOLOGY
Hot Water Association Charter MemberTherma Q is proud to be an independently audited Hot Water Association (HWA) charter member. The HWA Charter’s Code of Practice ensures that all members adhere to supplying fit for purpose products that are clearly and honestly described, and meet all required building and water regulations & standards. In addition, members have a responsibility to provide support to installers and customers in the supply and after-sales service related to their product.
ISO9001QualityManagement
ISO14001EnvironmentalManagement
CHARTER MEMBERMANUFACTURED IN THE
UNITED KINGDOM NEXT DAY DELIVERYUICK
Excellence in Hot Water Technology. 3 ThermaQ Specification Hotline 01924 2708472
QualityEverything we do at ThermaQ is about being committed to excellence providing the very best quality products and customer service. We have invested significantly in the latest manufacturing technology and systems to develop robust and automated processes that ensure we produce the best product at the best value.
Quick In today’s challenging consumer driven market place we aim to respond rapidly to all the demands asked of our business, anything from customer care support, quotations or a technical or delivery query, we have a same day reply policy. If we cannot provide a full response on the day of the enquiry, we will contact you to let you know that your query is being dealt with and a time that we will come back to you.
We also aim to set a high standard with our logistical partners by holding enough stock that will be available for next day delivery as standard*. As a distributor this means you are able to supply the full range of ThermaQ products promptly and as an engineer you can quickly respond to your customer’s requirements.
Quest Our customer focused policies have set us on a quest to achieving and maintaining world class service. We appreciate that in today’s society consumer demands and expectations are very high so we will continually strive to improve our service to meet these demands. In choosing to work with ThermaQ, you can be satisfied and confident that you are investing in a brand that will deliver on its promises.
We are a world class manufacturing company based in the uk. We are focused on our relationships with our customers and in the delivery of the highest quality hot water products. We utilise the latest innovative technologies and provide excellence in customer service.
Introducing ThermaQOur Quest in Hot Water Technology.
INTRO
DU
CIN
G TH
ERMA
QELEC
TRIC
|
tankless Heater stored Heater
HOW muCH WATEr CAn THE unIT PrOvIdE? unlImITEd. lImITEd by THE unIT SIzE.
dOES THE unIT nEEd TImE TO rECOvEr? nO, WATEr HEATS uP InSTAnTly. yES OnCE THE STOrE IS ExHAuSTEd.
CAn THE unIT bE uSEd WITH ECOnOmy 7? nO. yES.
IS THE flOW rATE Of THE unIT AffECTEd?yES, flOW rATE muST bE
rESTrICTEd ACCOrdIng TO THE TEmPErATurE rISE rEQuIrEd.
nO, HOT WATEr IS dISPEnSEd AT A COnSTAnT flOW rATE.
dO THE unITS HAvE SPECIAl POWEr rEQuIrEmEnTS?
yES, SOmE Of THE lArgEr unITS rEQuIrE bIg SuPPlIES, PlEASE
COnSulT An ElECTrICIAn.
nO, Our STOrEd WATEr unITSOnly rEQuIrE A mAxImum
Of 3kW.
We’re committed to fulfilling our customers’ requirements and with our wide product range we offer the very best in both domestic and commercial products. ThermaQ is a world class producer and distributor of products that installers and users alike can trust and rely on.
Tankless or stored water?Tankless water heaters are a relatively new concept in the uk, but around the world these unique and amazing products have become in many cases the standard choice. by heating the water rapidly on demand the tankless units can deliver hot water to one or many outlets (depending on size and requirements) instantly, this means you only heat the water you need.
by only heating the required amount of water we reduce our fuel costs significantly, but not only that, tankless heaters never run out of hot water. This can be extremely useful in situations where demand can rapidly rise and fall, be seasonal, or very occasional use.
To see which technology is right for your requirements please see our quick comparison chart below:
Water heater sizingOn each page of our brochure we have provided all the information required for a professional to be able to assess and accurately size the water heater required, when sizing it is important to consider the style of heater (see above chart), and the physical properties.
TANKLESS - you should consult the flow rate charts carefully and choose a size according to the temperature rise required when the mains is at its coldest such as during the winter months. make sure that the flow rates for this temperature rise are acceptible for your application, if they are not move to the next model up.
STORED - Consider the capacity of your chosen model, and look at the most demanding cases of water consumption, a plumber should be able to look at your application and assess the amount of water being used to arrive at a capacity and style of unit to suit your requirements.
ThermaQ Electric Water HeatingExcellence in Hot Water Technology.
Excellence in Hot Water Technology. 5 ThermaQ Specification Hotline 01924 2708474
ELECTR
IC |
INTRoDUCING TheRmaQ
Our Quest. 3
TheRmaQ eleCTRIC waTeR heaTING
Tankless or Stored. 5
TheRmaQ DeSIGNeR TaP
The heaters in the tap. 6
TheRmaQ mIDI
Low or medium water consumption. 8
TheRmaQ ToUCh
Touch button interface. 10
TheRmaQ elITe ToUCh
For multipoint applications. 12
TheRmaQ mIDI
Installation guidelines. 14
CoNTRolS
Flexible timer switch. 16
oUR PRoDUCTS
Ongoing investments in quality. 17
TheRmaQ evoCyl CylINDeRS
The new standard. 18
evoCyl STaNDaRD DIReCT
The first choice for performance. 20
evoCyl SlImlINe DIReCT
When space is of a premium. 21
DIReCT PRe-PlUmbeD SySTemS
For your environmental concerns. 22
Small home SolUTIoNS
Space saving frames for appartments. 23
Welcome to thermaQ’s electric waterheater product range, that continues to drive new manufacturing technologies and design practices; always leading the way in the uk water heating market. O
UR CO
MM
ITMEN
T
Product recoMMended FloW rate restriction WasHer FloW rate
FloW rate at400c aPProX outPut
3.3kW Designer Tap 1-2l/mInuTE 2l/mInuTE 1.1 l/mInuTE
3.5kW Touch heaTer 1-2l/mInuTE 2l/mInuTE 1.2 l/mInuTE
5.0kW Touch heaTer 2-3l/mInuTE 3l/mInuTE 2.6 l/mInuTE
7.0kW Touch heaTer 3-4l/mInuTE 4l/mInuTE 3.2 l/mInuTE
9.0kW Touch heaTer 4-5l/mInuTE 5l/mInuTE 5.0 l/mInuTE
11.0kW Touch heaTer 5-6l/mInuTE 6l/mInuTE 6.0 l/mInuTE
sPeciFications
proDucT coDe EWH0001
poWer (kW) 3.3
FloW raTe (Upto per Min.) 1-2l
MaTerial HIgH QuAlITy STAInlESS STEEl
VolTage (v) 220 - 240
raTeD currenT (A) 13.6
raTeD Frequency 50-60Hz
recoMMenDeD cable size 2.5mm2
oVerheaT proTecTion 700C
TherMal cuT-ouT 500C
ip raTing IP25
Working pressure 0.4 - 4 bar
WaTer connecTions g1/2”
DiMensions (mm) 198 x 160 x 98
Excellence in Hot Water Technology. 7 ThermaQ Specification Hotline 01924 270847
ELECTR
IC |
6
■ Point of use application so can be located almost anywhere.
■ Compact, stylish unit with built in heating element.
■ Easy installation using supplied power cord.
■ Built-in physical electricity guard.
■ Overheat protection, heating will cut-off automatically at 50⁰C.
■ Manual water and power control switch & automatic mechanical water pressure switch with double control mode to completely avoid dry heating.
■ Simple operation to deliver hot and cold water.
■ Rotatable nozzle.
■ Between 1-2L/min dependent on incoming mains and required temperature.
Hot water on demandConvenient, instant hot water. The new ThermaQ designer tap is the self-contained installable future of hand washing. finished in a clean steel look, the tap provides instant hot water on demand in virtually any location that has access to mains water and electricity – simply mount the tap in the sink or basin, connect the cold mains and have an electrician make a safe connection to a power supply. Easy to use without instructions, the flagship of our new heating range works like a regular tap, but allows for hot water access where it wasn’t possible before.
The heaTers in The TaP
Working in much the same way as a kettle, the internal coil rapidly heats
as electrical current passes through it, consequently
warming the water coming in via the cold mains. By using a coil on the inside of the tap, only necessary energy is drawn to heat the water and
minimise waste, whilst keeping the device
safe to touch.rotatable nozzle uP to 180°
Join the handwashing revolution, with our non-boiling 50°c hot water designer tap, designed with the heater built-in. ideal for homes, offices, workshops, garages, public areas, caravans, portable cabins, etc.
ThermaQ Designer TapSuitable for kitchens, sinks or wash basins, replacing the existing standard taps completley.
THERM
AQ
DESIG
NER TA
P
UNVENTED
OPTiOns aVaiLaBLe
PAGE 16
Hot Outlet Cold Inlet
TemperatureDial
HeatingIndicator
PowerIndicator
EWH0005 EWH0006 EWH0007
BELOW SINK
6L 10L 15L
6L 10L 15L
EWH0002 EWH0003 EWH0004
ABOVE SINK
TemperatureDial
HeatingIndicator
PowerIndicator
Hot Outlet Cold Inlet
Excellence in Hot Water Technology.
sPeciFication
proDucT MIDI 6 MIDI 10 MIDI 15
ABOVE SINK proD.coDe EWH0002 EWH0003 EWH0004
BElOw SINK proD. coDe EWH0005 EWH0006 EWH0007
poWer (kW) 2 2.5 2.5
DiMensions (mm) 330 x 300 x 260
360 x 330 x 290
410 x 370 x 320
boDy MaTerial HIgH STrEngTH AbS CASIng
VolTage (v) 220 - 240
recoMMenDeD cable size 2.5mm2
oVerheaT proTecTion 60°C
TherMal cuT-ouT 95°C
conTrol MoDe mECHAnICAl COnTrOl
Working pressure 0.2 - 5 bar
WaTer connecTions g1/2"
9 ThermaQ Specification Hotline 01924 2708478
ELECTR
IC |
ThermaQ MidiMidi hot water storage suitable for low or medium water consumption applications.
■ High strength ABS splash-proof casing.
■ Available in 3 models 6,10 and 15ltrs
■ Streamlined, aesthetic outer body for unobtrusive siting.
■ Built in immersion heater with carefully selected kW ratings mean quick reheats but easy installation. (Midi 6: 2.0kW / Midi 10 and 15: 2.5kW).
■ Compact design makes for easy siting above or below the sink.
■ Fully incorporated safety controls.
■ High value product insulation gives ‘B’ ErP banding for all of the Midi range.
Small volumes, immediate deliveryThe most universally applicable unit in the electric water heater range for low and medium volumes of water, the ThermaQ midi immediately produces good quality hot water at mains pressure whenever you need it. Available in both over and under sink varieties suitable for any water system setup, the midi can be sited almost anywhere. The small dimensions and low power consumption ensure the midi will be leading the ThermaQ revolution in electric water heating.
The Midi UnvenTed OPTiOnThe ThermaQ midi is available as an unvented solution supplied with all the optional extras required: Expansion vessel, Cold Water Set and Tundish. for guidance on the best set up for your requirements please see our guidance table on pAgE 14.
THERM
AQ
MID
I
the Midi is a small unvented electric water heater. it provides a smart appearance and easy to operate thermostat, being wall mounted its easy to incorporate into many applications such as offices, showrooms, kitchens and places where no other hot water source is available.
■ Available in 3.5kW and 5kW options.
■ High strength ABS splash-proof casing.
■ Can be rotated so the unit can provide connectionson the top or bottom of the unit.
■ Stainless steel heating element built-in.
■ Aesthetically pleasing, compact unit that cansupply instant (and unlimited) hot water.
■ Power cable fitted at factory.
■ Easy operation with last setting memory.
■ Touch LCD display.
■ Built-in leakage, overheat and dry heating protection.
■ “A” banding on ErP energy saving scheme.
A sleek look that still deliversdesigned as a slim and discrete point of use product, the new ThermaQ Touch can be located almost anywhere and is perfect for any utility or washroom - either above or below a sink. Available in 2 different kW ratings (dependent on expected water
requirement), the touch button control panel extends the life of the product whilst letting users easily select their desired water temperature for use – saving energy and making the unit safer.
sPeciFications
proDucT TOUCH 3 TOUCH 5
proDucT coDe EWH0008 EWH0009
poWer (kW) 3.5 5.0
boDy MaTerial HIgH STrEngTH AbS CASIng
VolTage (v) 220 - 240
recoMMenDeD cable size 2.5mm2
oVerheaT proTecTion 60°C
TherMal cuT-ouT 95°C
conTrol MoDe TOuCH SCrEEn COnTrOl
Working pressure 0.2 - 6 bar
WaTer connecTions g1/2"
DiMensions (mm) 198 x 1 6 0 x 9 8
importantIt is important to remember that with all instantaneous electric water heaters the incoming cold mains temperature and the flow rate directly affect the temperature of the water coming out. If the water is too cold, decrease the flow at the taps. If it is too hot, increase the flow. Always choose the kW rating carefully and ensure that the rise and flow rates are acceptable for your application.
60oc
50oc
40oc
30oc
20oc
10oc
0oc
FloW raTe l/Min
TOuch 3 TOuch 5
1 2 3 4 5 6 7 8
Excellence in Hot Water Technology. 11 ThermaQ Specification Hotline 01924 27084710
ELECTR
IC |
ThermaQ TouchInstantaneous Water Heater.
TeM
pera
Ture
ris
e
the therma Q touch delivers hot water instantaneously at point of use. no need for unvented kits or disharge arrangements its easy to install in tight spaces and provides single use hot water flow rates for hand basins and residential style applications.
THERM
AQ
TOU
CH
SPeCIaL FeatUre
CaN be USed
SINK
REVERSIBLEABOVE or
BELOW
60oc
50oc
40oc
30oc
20oc
10oc
0oc
FloW raTe l/Min
TOuch 3 TOuch 5
1 2 3 4 5 6 7 8
Excellence in Hot Water Technology.
sPeciFication
proDucT ELITE 7 ELITE 9 ELITE 11
proDucT coDe EWH0010 EWH0011 EWH0012
poWer (kW) 7 9 11
recoMMenDeD cable size 6.0mm2 6.0mm2 10.0mm2
boDy MaTerial STAInlESS STEEl
VolTage (v) 220 - 240
raTeD currenT (A) 47.9
oVerheaT proTecTion 67°C
TherMal cuT-ouT 90°C
conTrol MoDe TOuCH SCrEEn COnTrOlS
Working pressure 6 bar
WaTer connecTions g1/2”
DiMensions (mm) 360 x 215 x 60
13 ThermaQ Specification Hotline 01924 27084712
ELECTR
IC |
the elite touch is suitable for multi-point and single point applications where an instantaneous solution is required.
ThermaQ Elite TouchThe new generation of instantaneous water heaters.
■ Available in 7, 9 and 11kW options.
■ Patented multilayer heat exchanger technology reducing limescale build up.
■ High outputs of hot water for the size of the unit, offering excellent space saving opportunities.
■ Patented enclosed loop heating system.
■ Automatically set and maintain outlet temperature.
■ Large LED display offers users feedback on temperature whilst extending the life of the product.
■ Provides information on power and water consumption.
■ Automatic fault detection via on-screen feedback.
■ “A” banding on ErP energy saving scheme.
When multi-point application is the first requirementThe new Elite Touch provides compact instantaneous hot water in line with the temperature and flow rate graph shown above. As the unit is instantaneous and doesn’t store water this helps guard against Anti legionella, particularly useful in public areas.
The Elite Touch is happy in many situations such as kitchen, washroom and shower facilities.
It is also the ideal affordable solution to retro fit where the hot water system performs poorly. The specifier should match the output of the Elite Touch by deciding on the correct temperature and flow rate, not forgetting the electrical requirements for the project to ensure the correct amount of water is supplied where its needed.
ElITE 7 ElITE 9 ElITE 11
TeM
pera
Ture
ris
e
importantIt is important to remember that with all instantaneous electric water heaters the incoming cold mains temperature and the flow rate directly affect the temperature of the water coming out. If the water is too cold, decrease the flow at the taps. If it is too hot, increase the flow. Always choose the kW rating carefully and ensure that the rise and flow rates are acceptable for your application.
THERM
AQ
ELITE TOU
CH
Is the unit over 15 litres.
YES NO
YES NO
YES
NO YES
YES
NO YES NO
NO
INSTALL INSTALLINSTALL INSTALL INSTALL INSTALL
Do any check valve, stop taps with loose jumpers or devices that prevent reverse flow exist in the supply pipework?
Is the mains pressure> 3.5 bar?
Is the mains pressure> 3.5 bar?
Is the mains pressure> 3.5 bar?
Will the inlet pipework accomodate the expanded water without the hot
water entering any supply pipe connected to the cold water draw-off?
System 3Incoming Cold Mains - 5 Bar or Above.
Additional Equipment Required:2L Portable Expansion Vessel
Check ValvePressure Reducing Valve
HEATER
Chec
k Va
lve
Closest ColdDraw O�
PressureReducing Set
TQX0060 Service Valve
(Not Supplied)
System 2Pressure Relief - Closer Than Required (See System 1).
Additional Equipment Required:2L Portable Expansion Vessel
Check Valve
HEATER
Expansion VesselTQX0061
Expansion VesselTQX0061
Chec
k Va
lve
Closest ColdDraw O�
Service Valve(Not Supplied)
Discharge To Drain
No Additional Equipment Required
HEATER
Closest ColdDraw O�
Service Valve(Not Supplied)
Discharge To Drain
Discharge To Drain
System 1Incoming Cold Mains - Below 5 Bar. A indicates minimum distance required
to pressure relief for expansion.
A
6L Unit - 1.85m10L Unit - 2.80m15L Unit - 4.20M
OPTIONAL EXTRAS
Excellence in Hot Water Technology.
2Ltr PortabLe veSSeL aNd 15mm
SINGLe CHeCk
TQX 0061
15mm PreSSUre redUCING vaLve
(No GaUGe) Pre-Set
TQX 0060
KIT
AKIT
B
15 ThermaQ Specification Hotline 01924 270847
ELECTR
IC |
14
the thermaQ Midi electric Water Heater can be installed as an unvented item in a number of ways. the following guidelines are designed to help select the correct method prior to installation.
As demonstrated in this selection chart, storage vessels such as the midi require additional parts to allow full usage of our Electric Water Heating range within an unvented water system. These parts are normally installed with a regular unvented water system but are available as purchasable extras from ThermaQ should you require them.
MID
I ELECTRIC G
UID
ELINES
■ Holiday Mode: Programmable from 1-99 days, holiday mode keeps the hot water system on low activity while you’re away, and resumes regular activity upon your return.
■ System Protection: In periods of low heating activity, the time switch will regularly activate to ensure that the heating system does not drop below freezing in order to protect pipes and valve from freezing damage.
■ Landlord Feature: Useful for any properties being rented, the landlord feature allows for home owners to demonstrate to tenants via the room stat when the hot water cylinder and boiler require servicing (for up 31 days before the due date), allowing them to make sure their property is kept in correct and safe working order. Should the system not be serviced in time due to tenant non-cooperation, the landlord is able to pre-program the time switch to reduce the amount of heating the tenant receives (to a maximum of 1 hour per day) until serviced and reset by a competent engineer.
Excellence in Hot Water Technology. 17 ThermaQ Specification Hotline 01924 270847
MA
NU
FAC
TUR
ING
|
16
The TQx0064 is a 16 Amp 1 Channel Timeswitch, making it ideal for use with immersion heaters and electric boilers, controlling up to 3kW of heating at one time. It has been designed with the homeowner in mind with easy-to-use function buttons, simple overrides and a clear backlit lCd display. The programmer can be configured for 24 hour, 5/2 day or 7 day operation with preset programs for each mode, and comes with automatic bST/gmT time change clock.
The TQx0064 is packed full of features, including system protection, holiday mode, optional landlord service and a 1 to 3 hour heating boost function available as a top up from the automatic running settings, perfect for social housing.
thermaQ constantly invests in the latest manufacturing technology and systems to develop robust and automated processes. this ensures we supply the best product at the best value and consistently set the standards others aspire too.
The key to our success has been our ability to source quality products at a reasonable price and to produce the majority of our cylinder range in-house giving us 100% control over a wide range of hot water storage solutions we are able to manufacture and supply, all under one roof. This flexibility allows us to meet customers needs and deadlines even if there is a change in specification requirements.
you may have a need for a Horizontal, Slimiline or Pre-Plumbed cylinder for additional capabilities with one of our water heaters and we pride ourselves on using experienced local skills to manufacture these products to offer prompt and flexible service to satisfy these requirements.
Our range of cylinders are manufactured in accordance with british Standards. We offer a vast selection, including made to order, bespoke types using our Therma Quick service. See from page 14.
All our stainless steel cylinder products are manufactured from a high specification grade of duplex stainless steel to resist all forms of corrosion, including crevice and stress, whilst its high mechanical strength gives it fantastic durability.
Apart from our significant capability to produce large volumes of standard products, we have also developed a reputation as the go-to business when our customer needs a bespoke or special product.
All the component parts we supply are from leading manufacturers and are fully Cd compliant or bEAb approved.
We aim to set the benchmark when it comes to quality, performance and endurance. Our products are fully tested and compliant with the latest standards and regulations and supplied with a field service engineer backed manufacturers guarantee.
Our ProductsOngoing Investment in Quality.
Flexible Timer SwitchWith the home owner in mind.
INv
ESTING
IN O
UR P
RO
DU
CTS
Excellence in Hot Water Technology. 19 ThermaQ Specification Hotline 01924 27084718
ELECTR
IC |
Delivering QualityEnsuring excellence through our process.
ThermaQ Evocyl range is the first choice for value while providing superior performance.How do we guarantee our customers the best possible performance, quality and reliability, whilst ensuring our products provide powerful mains pressure showers and faster-filling baths, with maximum reliability and efficiency?
The answer is in our process. When developing the ThermaQ range of products we set about using the most advanced water heating technology available. When this doesn’t meet the high standards of performance, efficiency and reliability we insist upon, we develop innovative new technology of our own.
These advances come in many forms; Sophisticated duplex stainless steel cylinder construction for maximum strength and corrosion resistance, manufacturing the cylinder with robots for efficiency and technical accuracy, CfC and HCfC free injected foam, encasing the entire system for the best possible heat retention. To prove our confidence in this process, we provide every new Evocyl cylinder with a 25 year guarantee* against manufacturing defects.
Manufacturing our CylindersThermaQ manufacture all our domestic cylinders using duplex stainless steel. duplex has been selected against other materials such as copper, glass lined mild steel and lesser grades of stainless steel due to its substantially higher tensile strength and because it is a low carbon, high chromium content alloy. It allows units to be produced using thinner walls resulting in a lighter unit and offers a superior resistance to all forms of corrosion including, pitting, crevice corrosion and stress corrosion cracking.
When welding our cylinders a backing gas is used to ensure deep welding penetration and a clean internal weld surface. This ensures the welded area has the same corrosion resistance and mechanical strength as the parent metal.
Once the welding process has been completed the cylinder is ‘pickled and passivated’, this involves coating all internal surfaces of the cylinder with a chemical solution followed by water flushing, restoring the chromium surface finish. This process restores the passive film to all welded areas providing protection against premature corrosion, ensuring the longest possible working life for every cylinder.
Installer friendly design.
Standard units available from 60 - 600 litres.
Bespoke units up to 1000L manufactured to your own design.
Full range of slim units available, 60L to 210L, featuring a diameter of only 475mm - one of the slimmest on the market.
A range of horizontal cased units.
High performance coil-in-coil heat exchanger manufactured by ThermaQ.
External expansion for reliability and flexible locations.
Full NSF-WRc product approval.
vessel constructed from Duplex stainless steel for maximum strength and fully pressure tested.
Totally insulated with HCFC & CFC free foam.
Comprehensive controls and fixing kit from leading brands
Digital cylinder stat for optimum control of domestic hot water temperature.
Compression fittings supplied on all Evocyl cylinders.
Minimum water supply 1.5 Bar, 20 Litres/ Min.
Stainless steel stat pocket guaranteed against corrosion.
All units are pickled and passivated to ensure longer life.
25 year fully transferable warranty*.
All other cylinder components guaranteed for 2 years.
Our coil-in-coil heat exchanger is a technical triumph.
Manufactured in-house from one single piece of stainless
steel tube, this high efficiency heat exchanger allows the
cylinder to heat all the way to the bottom of the cylinder.
always leading the way in the uk water heating market thermaQ continue to drive new manufacturing technologies and design practices. We’re committed to fulfilling our customers’ requirements and with our wide product range we offer the very best in both domestic and commercial products that perfectly compliment our range of electric water heaters when storage of very large volumes of hot water are required.
ThermaQ EvocylThe New Standard in Hot Water Generation. Ev
OC
YL - TH
E NEW
STAN
DA
RD
Excellence in Hot Water Technology. 21 ThermaQ Specification Hotline 01924 27084720
ELECTR
IC |
dimensions in mm. Capacity in litres. Weight in kg.
b
C
C E
fd
A A
d
E g
b
Evocyl Standard Direct
the number one choice. designed for performance and reliability along with environmental care and responsibility.
Our standard range of superior quality Evocyl cylinders are built using high grade duplex stainless steel and designed to provide fast flowing hot water to single or multiple outlets. manufactured to the highest standards and supplied with innovative components to ensure quick recovery, low heat loss and economic use of energy. for your peace of mind, they come with a 25 year cylinder and 2 years parts guarantee, so we believe it will be a great investment you make in your hot water.
■ 25 year cylinder warranty and 2 years parts warranty.
■ Sizes 90L to 300L in 545mm diameter.
■ Manufactured from high grade Duplex Stainless Steel.
■ Totally insulated with 50mm 100% CFC and HCFC free polyurethane to minimise heat loss.
■ Supplied with high quality unvented installation components.
■ All plumbing connections are clearly identified and accessible at the front of the cylinder.
■ Lightweight construction with White Goods finish.
■ 22mm threaded connections.
■ Efficient primary coil.
■ Solar versions available.
■ Long-life 3kW Incoloy immersion heater supplied as standard. Upgrade to Titanium and or 6kw immersion heater on request.
■ Supplied with all safety controls as required by UK Building Regulations and Water Regulations.
475mm WIdtH
b
d
C E
fd
A A
C
E H
g
b
Evocyl Slimline Direct
When installation space is at a premium, we offer the same great product but with a much smaller footprint.
With a nominal diameter of only 475mm and sizes from 60l to 210 l our Evocyl Slimline is designed to fit In those smaller awkward spaces. This means many older dwellings with smaller airing cupboards can now enjoy the benefits of mains pressure hot water with fast filling baths and modern showers.
for your peace of mind, all our cylinders come with a 25 year cylinder and 2 years parts guarantee, it just might be the best small investment you make in your hot water.
NoW avaILabLe
SLiMLine
EvO
CY
L CY
LIND
ERS
EvOCYL SLIMLINE SOLAR DIRECT
coDeTqssD0150
TqssD0180
TqssD0210
capaciTy aT 3 bar (l)
150 180 210
heighT h 1510 1775 1980
DiaMeTer 475 475 475
colD inleT a 105 105 105
boTToM coil b 280 280 355
iMMersion c 335 335 445
sTaT pockeT D 320 320 395
iMMersion e 916 1093 1256
sec. reTurn F - - 1676
T&p ValVe/sTaTs g 1273 1538 1783
EvOCYL SLIMLINE DIRECT
coDeTqnDi 0060
TqnDi 0090
TqnDi 0120
TqnDi 0150
TqnDi 0180
TqnDi 0210
capaciTy aT 3 bar (l)
60 90 120 150 180 210
heighT e 640 940 1205 1470 1750 1920
DiaMeTer 475 475 475 475 475 475
colD inleT a 162 162 162 162 162 162
iMMersion b 212 212 212 212 212 212
iMMersion c - - 722 905 1082 1245
T&p ValVe D 437 722 987 1262 1527 1739
EvOCYL STANDARD DIRECT
coDeTqDir 0090
TqDir 0120
TqDir 0150
TqDir 0180
TqDir 0210
TqDir 0250
TqDir 0300
capaciTy aT 3 bar (l)
90 120 150 180 210 250 300
heighT e 760 940 1140 1320 1510 1760 1980
DiaMeTer 545 545 545 545 545 545 545
colD inleT a 195 195 195 195 195 195 195
iMMersion b 242 242 242 242 242 242 242
iMMersion c - 519 619 719 819 959 1109
T&p ValVe D 515 703 890 1078 1266 1516 1829
EvOCYL STANDARD SOLAR DIRECT SINGLE COIL
coDeTqsDi 0150
TqsDi 0180
TqsDi 0210
TqsDi 0250
TqsDi 0300
capaciTy aT 3 bar (l)
150 180 210 250 300
heighT g 1140 1320 1510 1760 1980
DiaMeTer 545 545 545 545 545
colD inleT a 195 195 195 195 195
boTToM coil b 285 295 375 370 370
sTaT pockeT c 345 350 425 425 430
iMMersion D 390 460 525 680 785
iMMersion e 605 710 815 955 1115
T&p ValVe/sTaT F 895 1065 1260 1510 1785
SMA
LL HO
ME SO
LUTIO
NS
CYLINDER SpECIfICatIoN
■ 25 year cylinder warranty and 2 years parts warranty.
■ Cylinder manufactured from marine grade Duplex Stainless Steel specially selected for its high strength and resistance to stress and crevice corrosion.
■ Lightweight construction with white goods finish.
■ Flat base for additional stability.
■ All plumbing connections are clearly identified and accessible at the front of the cylinder.
■ Pre-fitted pipework.
■ Totally insulated with 100% CFC-Free (ODP zero) polyurethane to minimise heat loss (50mm thick).
■ Long-life 3kW Incoloy immersion heater with integral thermostat and thermal cut-out.
■ 1/2” temperature and pressure relief valve operating at 90°C/7 bar.
■ Smart Stat fitted in bottom as standard.
SMA
LL HO
ME SO
LUTIO
NS
Evocyl Direct pre-plumb cylinders come with cold inlet set, T&P relief valve, 3kW immersion heater and expansion vessel as standard.
ThermaQ Cylinders reserve the right to change the design and style of the components supplied at any time. When ordering spare parts to ensure consistency and compatibility please contact our technical department who will be pleased to help you with your enquiry.
Cold water inlet setT Q X 0 0 1 7
tundishT Q X 0 0 2 4
t&P relief valveT Q X 0 0 0 1
3kw immersion heaterT Q X 0 0 0 2
exPansion vesselT Q X 0 0 3 4 ( 1 2 L ) T Q X 0 0 3 5 ( 1 8 L ) T Q X 0 0 3 6 ( 2 4 L )
Excellence in Hot Water Technology. 23 ThermaQ Specification Hotline 01924 27084722
ELECTR
IC |
As part of our desire to fulfil any installation requirement, we can provide our space-saving handmade washing machine frames. These are perfect for utilising space in smaller apartments, meaning that an unvented cylinder can be mounted above a washing machine in an airing cupboard - perfect in combination with our direct pre-plumb units.
Combining these frames with our pre-plumbed direct cylinder range gives a compact and tidy look to the airing cupboard. utilising the Evocyl Air model would also eliminate the need for any expansion vessels, saving further space as well as time on installation!
model shown in picture: Evocyl Slimline 90l direct.
SMA
LL HO
ME SO
LUTIO
NS
Direct Pre-Plumbed Systems
the ready-to-go pre-plumbed units are available across our range of standard and slimline direct cylinders in internal and external expansion, saving time on large volume installations in apartment blocks.
Small Home SolutionsOur washing machine frames are perfect for saving space in apartments, allowing a full cylinder to be supported above a white goods appliance.
■ Available in plain steel or painted finish.
■ L 880 x W 660 x D 710 (mm)
■ Capable of supporting full weight of any of our domestic direct cylinders Evocyl or Evocyl Air, 60-300L.
DIRECT
TQ/EWH/FEBUARY/2018/VER2
RoHS
ErPCOMPLIANT
UNIT 3 SANDBEDS TRAD. EST. DEWSBURY ROAD OSSETT WEST YORKSHIRE WF5 9ND
t 01924 270847 F 01924 271310
[email protected] WWW.tHerMaQ.co.uk
EXCELLENCE IN HOT WATER TECHNOLOGY
ThermaQ endeavour to keep the content of this brochure as up-to-date as possible. We reserve the right to make changes to all ThermaQ products and services at anytime. To ensure you have the most current information please contact ThermaQ directly.
Follow us on twitter @ thermaQ