electric saws - universal constructuniversalconstruct.ro/...the latest generation of electric saws...

The latest generation of electric saws consists of the

DR, DS, DT, DU, DW machines and the new DX high

performance models equipped with the latest tech-

nology.

The most recent series offers a power range to suit all

types of materials, tiles or building materials, as well as

high precision miter cutting and other special angle

cuts, in addition to accepting large formats, with

heights of up to 9” (232 mm.) and cutting lengths of

up to 51” (130 cm.).

These models all incorporate thermal protective devi-

ces and overload cut off switches, and fully comply

with most of current standards and directives, making

RUBI® electric saws the safest on the market.

At the same time, RUBI® also offers a large range of ligh-

ter portable cutters (models D and ND), for tiles and

facings in general. These models are extremely easy to use

and offer maximum safety guarantees, without any detri-

ment to their range of features and high performance.

The whole range of electrically operated machinery is

fully approved by numerous organizations and comply

with current CE, GS, CSA, and MEEI standards, offering

the user full two years warranty in all RUBI® internatio-

nal after-sales service centres.

ELECTRIC SAWS

146

Electric saws Diamant D

• For gres, ceramic, glass, tiles, marble and other materials.• Diamond blade Ø 8” (200 mm.) included.• With thermic security switch.• Water refrigeration of the blade.• Electric cable: 4.9 ft. (1,5 m.).• With guide to allow repetitive cuts.

• Table, internal structure and chassis made entirely of stainless steel.• Tip-up table for mitring up to 16” (42 cm.).• Adjustable accessories (see page 164):

Guide for 45º cuts (Ref. 45345).Guide for cuts from 0 to 90º (Ref. 45880).Cleaning block (Ref. 05973).

The 100% rustproof machine

D-200

DIAMANT D-200Single-phase motor1.2 HP-0.88 kW

1 8

230 V 50 Hz. 8413797459456 45945230 V 50 Hz. UK 8413797459517 45951230 V 50 Hz. CH 8413797459586 45958

230 V 50 Hz. AUSTR. 8413797459418 45941220 V 60 Hz. 8413797459562 45956120 V 50 Hz. UK 8413797459524 45952

RPM

D-200 2875 1 1/2” • Ø 8” 18” x 18” x 10” 35.3 Lb.(35 mm.) (200 mm.) (47x46x 26 cm.) (16 kg.)

Stop for repeated cuts.

100% rustproof.

Foldable table for miter joints.

DIAMANT D REFREF

STANDARD www.rubi.comACCESSORIES

230 V 50/60 Hz. 8413797469905 46990230 V 50/60 Hz. U.K. 8413797469950 46995230 V 50/60 Hz. CH. 8413797469974 46997220 V 50/60 Hz. USA. 8413797469929 46992230 V 50/60 Hz. AUS. 8413797469936 46993

120 V 50/60 Hz. 8413797469912 46991120 V 50/60 Hz. USA. 8413797469981 46998110 V 50/60 Hz. U.K. 8413797469967 46996230 V 50/60 Hz. DK. 8413797459998 46999

230 V 50/60 Hz. 8413797459906 45990230 V 50/60 Hz. U.K. 8413797459951 45995230 V 50/60 Hz. CH. 8413797459975 45997220 V 50/60 Hz. USA. 8413797459920 45992230 V 50/60 Hz. AUSTR 8413797459937 45993

120 V 50/60 Hz. 8413797459913 45991120 V 50/60 Hz. USA. 8413797459982 45998110 V 50/60 Hz. U.K. 8413797459968 45996230 V 50/60 Hz. DK. 8413797459999 45999

147

Electric saws Diamant ND

• For gres, ceramic, glass, tiles, marble and other materials• Ø 4 1/2” (115 mm.) or 5” (125 mm.) diamond blade.• Ø 5” (125 mm.) diamond blade included.• Water refrigeration of the blade.• Electric cable: 4.9 ft. (1,5 m.).• With guide to allow repetitive cuts.

• With carrying case.• Direct drive.• Pal Box Available. See page. 250.• Adjustable accessories (see page 164):

Cleaning block (Ref. 05973).

The lightest most powerful portable in the market.

ND-125

DIAMANT ND-125Single-phase motor0.8 HP-0.6 kW

2 *36

DIAMANT ND-125 WITHOUT CASESingle-phase motor0.8 HP-0.6 kW

2 64

RPM

ND-125 4800 32/32” / 1 1/4” • 4 1/2”-5’’ 15 3/4” x 11” x 5” 8.82 Lb.(25 / 30 mm.) (115-125 mm.) (40 x 30 x 14 cm.) (4 kg.)

Foldable table.

With carrying case.

Lateral Stop.

DIAMANT ND REFREF


148

• For gres, ceramic, glass, tiles, marble and other materials.• Diamond blade Ø 7” (180 mm.) included.• With thermic security switch.• Water refrigeration of the blade.• Electric cable: 4.9 ft. (1,5 m.).• Tip-up table for mitring up to 8” (20 cm.) ND-180-E

and 18’’ (45 cm.) ND-180.• With guide to allow repetitive cuts.

• Stainless steel work-table.• Direct drive.• Adjustable accessories (see page 164):

Guide for 45º cuts (Ref. 45345).Guide for cuts from 0 to 90º (Ref. 45880).Cleaning block (Ref. 05973).Tray (Ref. 45434)

ND-180-E

ND-180


The largest product range in the world.

ND

DIAMANT ND-180-ESingle-phase motor0.5 HP-0.37 kW

1 *16

230 V 50 Hz. 8413797459708 45970230 V 50 Hz. UK 8413797459753 45975230 V 50 Hz. CH 8413797459777 45977230 V 50 Hz. AUSTR. 8413797459388 45938

220 V 60 Hz. 8413797459715 45971120 V 50 Hz. UK 8413797459760 45976120 V 60 Hz. USA 8413797459784 45978


1 8


220 V 60 Hz. 8413797459012 45901120 V 50 Hz. UK 8413797459067 45906120 V 60 Hz. USA 8413797459081 45908120 V 60 Hz. CSA 8413797459098 45909

RPM

ND-180-E 2800 8” 1 7/6” • Ø 7” 19” x 15 3/4” x 9 1/16” 28.7 Lb(20 cm.) (35 mm.) (180 mm.) (48 x 40 x 23) (13 kg)

ND-180 2800 18” 1 7/6” • Ø 7” 19” x 17” x 9 1/16” 30.6 Lb(45 cm.) (35 mm.) (180 mm.) (48,5 x 43 x 23 ) (13,9 kg)

DIAMANT ND REFREF


149


1 8



DIAMANT ND-300Single-phase motor2 HP-1.5 kW

1 6



• For gres, ceramic, glass, tiles, marble and other materials.• Ø 8” (200 mm.) diamond disc included in ND-200• Ø 12’’ (300 mm.) diamond disc not included in ND-300• With thermic security switch.• Water refrigeration of the blade.• Electric cable: 4.9 ft. (1,5 m.).• Tip-up table for mitring up to 20” (50 cm.) for ND-200

and 24” (60 cm.) ND-300.

• With guide to allow repetitive cuts.• Stainless steel work-table. • Direct drive.• Adjustable accessories (see page 164):

Guide for 45º cuts (Ref. 45345).Guide for cuts from 0 to 90º (Ref. 45880).Cleaning block (Ref. 05973).Tray (Ref. 45434).

ND-200

ND-300


The largest product range in the world.

ND

RPM

ND-200 2770 20” 1 5/8” • Ø 8” 21” 3/8” x 20 3/4” x 9” 33.1 Lb(50 cm.) (40 mm.) (200 mm.) (51 x 52,5 x 24 cm.) (15 kg)

ND-300 2800 24” 3” — Ø 12” 27” x 24” x 10” 67.2 Lb(60 cm.) (75 mm.) (300 mm.) (69 x 63 x 26 cm.) (30,5 kg)

DIAMANT ND REFREF


150

DIAMANT DU-200Single-phase motor1 HP-0.73 kW

1 4


220 V 60 Hz. 8413797559514 55951120 V 50 Hz. 8413797559569 55956120 V 60 Hz. USA 8413797559583 55958110 V 50 Hz. UK 8413797559538 55953

• For gres, ceramic, glass, tiles, marble and other materials.• Diamond blade Ø 8” (200 mm.) included.• With thermic security switch.• Water pump: refrigeration of blade (with flow control valve).• Motor assembly mounted on fold-away sliding bearings for miter cuts.• Electric cable: 4.9 ft. (1,5 m.).• Reinforced chassis, structural rigidity.

• With guide to allow repetitive cuts and adjustable square.• With table 22” x 14” (57 x 37 cm.).• Direct drive.• Adjustable accessories (see page 164):

Support table (Ref. 50935).Roller table extension (Ref. 057940).Cleaning block (Ref. 05973).

DU-200 / DU-200-L

Electric saws Diamant DU and DU-L

DIAMANT DU-200-LSingle-phase motor1 HP-0.73 kW

1 4



Foldable head for miter cutting.

Gradable stop.

Gradable square.

DIAMANT DU REFREF


RPM

DU-200 2750 18” 13 x 13” 2” • Ø 8” 33” x 15” x 12” 57.3 Lb(45 cm.) (32x32 cm.) (48 mm.) (200 mm.) (85 x 40 x 32) (26 kg)

DU-200-L 2750 25” 18 x 18” 2” • Ø 8” 41’’ x 15’’ x 12’’ 66.1 Lb(65 cm.) (46x46 cm.) (48 mm.) (200 mm.) (105 x 40 x 32) (30 kg)

RPM

DW-200 2750 18”-* 20” 14 x 14” 2” / 3’’ • Ø 8” 33” x 15” x 15” 59.5 Lb •(45-*50 cm.) (35x35 cm.) (48 / 75 mm.) (200 mm.) (85x40x40,6 cm.) (27 kg.)

DW-200-L 2750 24”-* 28” 19 x 19” 2” / 3’’ • Ø 8” 41” x 15” x 15” 68.3 Lb •(63-*70 cm.) (50x50 cm.) (48 / 75 mm.) (200 mm.) (105x40x40,6 cm.) (31 kg.)

151

DIAMANT DW-200Single-phase motor1 HP-0.73 kW

1 4



DW-200 / DW-200-L

Electric saws Diamant DW and DW-L

• For gres, ceramic, glass, tiles, marble and other materials.• Diamond blade Ø 8” (200 mm.) included.• With thermic security switch.• Water pump: refrigeration of blade (with flow control valve).• Electric cable: 4.9 ft. (1,5 m.).• Motor assembly mounted on fold-away sliding bearings for miter cuts.• Vertically adjustable mobile head with plunge cut effect.• Reinforced chassis, structural rigidity.

• With guide to allow repetitive cuts and adjustable square.• With table 22” x 14” (57 x 37 cm.)• Direct drive.• Adjustable accessories (see page 164):

Support table (Ref. 50935).Roller table extension (Ref. 057940).Cleaning block (Ref. 05973).

DIAMANT DW-200-LSingle-phase motor1 HP-0.73 kW

1 4



* Using plunge cut effect.


Gradable stop and square.

Adjustable plunge cut.

DIAMANT DW REFREF


DIAMANT DW

152

REFREF

• For gres, ceramic, glass, tiles, marble and other materials.• Diamond blade Ø 8” (200 mm.) included.• With thermic security switch.• Water pump: refrigeration of blade (with flow control valve).• Motor assembly mounted on fold-away sliding

bearings for miter cuts.• Electric cable: 4.9 ft. (1,5 m.).• Reinforced chassis, structural rigidity.

• Vertically adjustable mobile head with plunge cut.• With guide to allow repetitive cuts and adjustable square.• With table 22” x 14” (57 x 37 cm.)• Direct drive.• Adjustable accessories (see page 164):

Roller table extension (Ref. 057940).Cleaning block (Ref. 05973).

DW-200-LP

DIAMANT DW-200-LPSingle-phase motor1 HP-0.73 kW

1 4

230 V 50 Hz. 8413797559954 55995230 V 50 Hz. UK 8413797549850 54985230 V 50 Hz. CH 8413797549874 54987230 V 50 Hz. AUSTR. 8413797559996 55999220 V 60 Hz. 8413797549812 54981220 V 60 Hz. USA 8413797549829 54982

120 V 60 Hz. 8413797549898 54989120 V 60 Hz. USA 8413797549881 54988120 V 50 Hz. 8413797549867 54986110 V 50 Hz. UK 8413797549836 54983100 V 60 Hz. J.P. 8413797549805 54980100 V 50 Hz. J.P. 8413797549843 54984


Electric saws Diamant DW-LP

RPM

DW-200-LP 2750 24-*28’’ 19 x 19” 2” / 3” • Ø 8” 41’’ x 15’’ x 45’’ 83.7 Lb •(63-*70 cm.) (50x50 cm.) (48 / 75 mm.) (200 mm.) (105x40x116 cm.) (38 kg.)





DIAMANT DW-200-NSingle-phase motor1.5 HP-1.1 kW

1 *2

230 V 50 Hz. CH 8413797549072 54907120 V 60 Hz. USA 8413797549089 54908120 V 60 Hz. 8413797549096 54909100 V 50 Hz. JP 8413797549102 54910230 V 50 Hz. AUS 8413797549164 54916230 V 50 Hz. DK 8413797549195 54919

230 V 50 Hz. 8413797549003 54900220 V 60 Hz. 8413797549010 54901220 V 60 Hz. USA 8413797549027 54902110 V 50 Hz. UK 8413797549034 54903100 V 60 Hz. JP 8413797549041 54904230 V 50 Hz. UK 8413797549058 54905120 V 50 Hz. 8413797549065 54906


153

DW-200-N / 250-N

Electric saws Diamant DW-N

DIAMANT DW-250-NSingle-phase motor1.5 HP-1.1 kW

1 *2

230 V 50 Hz. 8413797549409 54940220 V 60 Hz. 8413797549416 54941220 V 60 Hz. USA 8413797549423 54942110 V 50 Hz. UK 8413797549430 54943100 V 60 Hz. JP 8413797549447 54944230 V 50 Hz. UK 8413797549454 54945120 V 50 Hz. 8413797549461 54946

230 V 50 Hz. CH 8413797549478 54947120 V 60 Hz. USA 8413797549485 54948120 V 60 Hz. 8413797549492 54949100 V 50 Hz. JP 8413797549508 54950230 V 50 Hz. AUS 8413797549560 54956230 V 50 Hz. DK 8413797549591 54959

RPM

DW-200-N 2875 28 -*29” 21 x 21” 1 5/8” / 2 3/16” • Ø 8” 45 x 18 x 45” 101.4 Lb. •(73-*75 cm.) (52x52 cm.) (32 / 55 mm.) (200 mm.) (116x48x116 cm.) (46 kg.)

DW-250-N 2875 28 -*29” 21 x 21” 2 5/8” / 3 1/4” • Ø 10” 45 x 18 x 45” 103.6 Lb. •(73-*75 cm.) (52x52 cm.) (65 / 80 mm.) (250 mm.) (116x48x116 cm.) (47 kg.)

Detachable table.

System of foldable legs.

Wheels to facilitate transport.

DIAMANT DW-N REFREF


• For gres, ceramic, glass, tiles, marble and other materials.• Ø 8” (200 mm.) diamond disc included in DW-200-N.• Ø 10 (250mm.) diamond disc included in DW-250-N.• With thermic security switch.• Water pump refrigeration of blade (with flow control valve).• Motor assembly mounted on fold-away sliding bearings for miter cuts.• System of foldable legs.• Includes wheels and a handle to ease the movement

of the machine and its loading on to a vehicle.• Detachable table to facilitate the cleaning of the machine.

• New guide with an easily adjustable ruler.• Electric cable: 4.9 ft. (1,5 m.)• Reinforced chassis, structural rigidity.• Vertically adjustable mobile head with plunge cut.• Direct drive.• Adjustable accessories (see page 164):

Roller table extension (Ref. 57940)Cleaning block (Ref. 05973)Special slides for mitre cutting (Ref. 57991)

154

DS-230-LPS

Electric saws Diamant DS-LPS

• For gres, ceramic, glass, tiles, marble and other materials.• With thermic security switch.• Water pump: refrigeration of blade

(with flow control valve).• Diamond blade Ø 9” (230 mm.) not included.• Motor assembly mounted on sliding bearings, with vertically

adjustable and foldable mobile head for miter cuts.• Electric cable: 4.9 ft. (1,5 m.).

• With guide to allow repetitive cuts.• With table 21” x 26” (55 x 68 cm.)• Direct drive.• For mitre cutting very tough materials, we recommend

the use of the special slides (Ref.57991).• Adjustable accessories (see page 164):

Roller table extension (Ref. 057940).Cleaning block (Ref. 05973).Special slides for mitre cutting (Ref. 57991).

DIAMANT DS-230-LPSSingle-phase motor1.5 HP-1.1 kW

1 **1

230 V 50 Hz. 8413797599008 59900230 V 50 Hz. UK 8413797599015 59901230 V 50 Hz. CH 8413797599107 59910230 V 50 Hz. AUSTR. 8413797599183 59918220 V 60 Hz. 8413797599053 59905

220 V 60 Hz. USA 8413797599084 59908120 V 60 Hz. 8413797599046 59904120 V 60 Hz. USA 8413797599121 59912120 V 50 Hz. 8413797599039 59903120 V 50 Hz. UK 8413797599022 59902


RPM

DS-230-LPS 2875 *28” 19 x19” 2”/3’’ — Ø 9” 43”x21”x55 1/8” 127.9 Lb 145.5 Lb •(*71 cm.) (50x50 cm.) (50 / 90 mm.) (230 mm.) (110x55x140 cm.) (66 kg.) (74 kg.)



Stop for repeated cuts

DIAMANT DS-LPS REFREF


230 V 50 Hz. 8413797599909 59990230 V 50 Hz. U.K. 8413797599916 59991120 V 60 Hz. USA 8413797599923 59992

220 V 60 Hz. 8413797599954 59995120 V 50 Hz. U.K. 8413797599978 59997220 V 60 Hz. USA 8413797599985 59998

155

Electric saws Diamant DS-EP

DIAMANT DS-250-EPSingle-phase motor1.5 HP-1.1 kW

1 **1

• For gres, ceramic, glass, tiles, marble and other materials.• Diamond Blade Ø 10” included (250 mm.).• With thermic security switch.• Water pump: refrigeration of blade (with flow control valve).• Motor assembly mounted on sliding bearings, with vertically

adjustable and foldable mobile head for miter cuts.• Electric cable: 4.9 ft. (1,5 m.).• Reinforced chassis, structural rigidity.• Vertically adjustable mobile head with plunge cut capability

and foldable head for miter cuts.

• With guide to allow repetitive cuts.• With table 21” x 26” (55 x 68 cm.). Direct drive.• Direct drive.• For mitre cutting very tough materials, we recommend

the use of the special slides (Ref.57991).• Adjustable accessories (see page 164):

Roller table extension (Ref. 057940).Cleaning block (Ref. 05973).Special slides for mitre cutting (Ref. 57991).

DS-250-EP


RPM

DS-250-EP 2875 *26” 18 x 18” 2” / 3” • Ø 10” 43” x 21” x 51” 147.7 Lb 165.3 Lb •(*65 cm.) (45x45 cm.) (70 / 92 mm.) (250 mm.) (110x55x130 cm.) (67 kg.) (75 kg.)




DIAMANT DS-EP REFREF


156

DIAMANT DS-250Single-phase motor3 HP-2.2 kW

Three-phase motor4 HP-3 kW

1 **1

230 V 50 Hz. 8413797579703 57970240 V 50 Hz. AUSTR. 8413797579857 57985230 V 50 Hz. UK 8413797579710 57971

220 V 60 Hz. 8413797579758 57975220 V 60 Hz. USA 8413797579789 57978120 V 50 Hz. UK 8413797579727 57972120 V 60 Hz. USA 8413797579772 57977

380 V 50 Hz. 8413797579765 57976

DIAMANT DS-250-FC ( With slab holder).Single-phase motor3 HP-2.2 kW


1 **1

230 V 50 Hz. 8413797599206 59920240 V 50 Hz. AUSTR. 8413797599350 59935230 V 50 Hz. UK 8413797599213 59921220 V 60 Hz. 8413797599251 59925

220 V 60 Hz. USA 8413797599282 59928120 V 50 Hz. UK 8413797599220 59922120 V 60 Hz. USA 8413797599275 59927

380 V 50 Hz. 8413797599268 59926

DIAMANT DS-250-LSingle-phase motor3 HP-2.2 kW


1 **1

230 V 50 Hz. 8413797589207 58920230 V 50 Hz. UK 8413797589214 58921220 V 60 Hz. 8413797589252 58925

220 V 60 Hz. USA 8413797589283 58928120 V 50 Hz. UK 8413797589221 58922120 V 60 Hz. USA 8413797589238 58923240 V 50 Hz. AUSTR. 8413797589351 58935

380 V 50 Hz. 8413797589269 58926

Electric saws Diamant DS and DS-L

• For gres, ceramic, glass, tiles, marble and other materials.• With thermic and overload security switches.• Water pump refrigeration of blade (with flow control valve).• Diamond blade Ø 10” (250 mm.) not included.• Motor assembly mounted on sliding bearings, with vertically

adjustable and foldable mobile head for miter cuts.• With guide for repetitive cuts and fold-away accessory for repetitive miter cuts.• Ceramic fixing accessory (included with DS-250-L and DS-250-FC)

• With large table 21” x 35” (59 x 90 cm.) in DS-250 and33” x 51” (86 x 130 cm.) in DS-250-L.

• Adjustable accessories (see page 164)Roller table extension (Ref. 057940).Special miter joint decks (Ref. 57990).Cleaning block (Ref. 05973).Ceramic fixing accessory for DS-250 (Ref. 57945).

DS-250 / FC / L

(Photo DS-250-L)

PRODUCT ONLY WITH SPECIALORDERS. INQUIRE FOR AVAILABILITY

RPM

DS-250 2800 36” 26x26” 2” — Ø 10” 57”x 25”x48” 248 Lb 280 Lb(92 cm.) (65x65 cm.) (50 mm.) (250 mm.) (145x64x123 cm.) (112,5 kg.) (127 kg.)

DS-250-FC 2800 36” 26x26” 2” — Ø 10” 57”x25”x48” 252.4 Lb 284.4 Lb(92 cm.) (65x65 cm.) (50 mm.) (250 mm.) (145x64x123 cm.) (114,5 kg.) (129 kg.)

DS-250-L 2800 51” 36x36” 2” — Ø 10” 75”x33”x48” 380.3 Lb 498.2 Lb(130 cm.) (92x92 cm.) (50 mm.) (250 mm.) (193x87x123 cm.) (172,5 kg.) (226 kg.)

Ceramic fixing accessory.

Reinforced bars.


DIAMANT DS REFREF


157

• For ceramic tiles and all types of building materialssuch as brick, facebrick, fire brick, etc.

• With thermal and overload protection devices.• Water pump refrigeration of blade (with flow control valve).• Diamond blade Ø 12’’ (300 mm.) and 14” (350 mm.) not included.• Motor assembly mounted on sliding bearings.• Vertically adjustable and foldable mobile head for miter cuts.• Ceramic fixing accessory (included with DS-300-L and DS-300-FC).

• With guide for repetitive cuts and fold-away accessory for repetitive miter cuts.• With large table 23” x 33” (59 x 86 cm.) in DS-300

and 33” x 51” ( 86 x 130 cm.) in DS-300-L.• Adjustable accessories: (see page 164)

Roller table extension (Ref. 57940).Special miter joint decks (Ref. 57990).Cleaning block (Ref. 05973).Ceramic fixing accessory for DS-300 (Ref. 57946).

* Using plunge cut effect. ** Useful cutting height: 1 stroke 3 15/16” (100 mm.) with Ø 14” (350 mm.) disc.

DS-300 / FC / L

Electric saws Diamant DS and DS-L

(Photo DS-300-L)

PRODUCT ONLY WITH SPECIALORDERS. INQUIRE FOR AVAILABILITY

DIAMANT DS-300Single-phase motor3 HP-2.2 kW2.6 HP-1.9 kW*Three-phase motor4 HP-3 kW

1 **1

230 V 50 Hz. 8413797579208 57920230 V 50 Hz. UK 8413797579215 57921230 V 50 Hz. CH* 8413797579307 57930220 V 60 Hz. 8413797579253 57925


230 V 50 Hz. 8413797579314 57931220 V 60 Hz. 8413797579291 57929

380 V 50 Hz. 8413797579260 57926380 V 60 Hz. 8413797579277 57927

DIAMANT DS-300-FC ( With slab holder).Single-phase motor3 HP-2.2 kW


1 **1

230 V 50 Hz. 8413797599701 59970240 V 50 Hz. AUSTR. 8413797599855 59985230 V 50 Hz. UK 8413797599718 59971220 V 60 Hz. 8413797599756 59975


380 V 50 Hz. 8413797599763 59976

DIAMANT DS-300-LSingle-phase motor3 HP-2.2 kW2.6 HP-1.9 kW*Three-phase motor4 HP-3 kW

1 **1

230 V 50 Hz. 8413797589405 58940230 V 50 Hz. UK 8413797589412 58941230 V 50 Hz. CH* 8413797589504 58950220 V 60 Hz. 8413797589450 58945

220 V 60 Hz. USA 8413797589481 58948120 V 50 Hz. UK 8413797589429 58942120 V 60 Hz. USA 8413797589436 58943240 V 50 Hz. AUSTR. 8413797589559 58955

230 V 50 Hz. 8413797589511 58951220 V 60 Hz. 8413797589498 58949

380 V 50 Hz. 8413797589467 58946380 V 60 Hz. 8413797589474 58947

RPM

DS-300 2800 *35” 24 x 24” 3” / 5’’ — 12-14” 57” x 25” x 55” 250.2 Lb 302 Lb •(*88 cm.) (62x62 cm.) (75 / 140 mm.) (300-350 mm.) (145x64x140 cm.) (113,5 kg.) (137 kg.)

DS-300-FC 2800 *35” 24 x 24” 3” / 5’’ — 12-14” 57” x 25” x 55” 254.2 Lb 306.4 Lb •(*88 cm.) (62x62 cm.) (75 / 140 mm.) (300-350 mm.) (145x64x140 cm.) (115,5 kg.) (139 kg.)

DS-300-L 2800 *51” 36 x 36” 3” / 5’’ — 12-14” 75” x 33” x 55” 382.5 Lb 529.2 Lb •(*130 cm.) (92x92 cm.) (75 / 140 mm.) (300-350 mm.) (193x87x140 cm.) (173,5 kg.) (240 kg.)

Ceramic fixing accessory.


Plunge cut micro-adjustment.

DIAMANT DS REFREF


158

Electric saws Diamant DX and DX-L


• With thermal and overload security switches.• Water pump refrigeration of blade (with flow control valve).• Ø 14” (350 mm.) diamond blade not included. • Motor assembly mounted on sliding bearings.• Vertically adjustable and foldable mobile head for miter cuts.• With guide for repetitive cuts and fold-away accessory

for repetitive miter cuts.

• Ceramic fixing accessory included in DX-350-L.• Electric cable: 4.9 ft. (1,5 m.)• With table 23” x 33” (59 x 86 cm.) in DX-350

and 33” x 51” (86 x 130 cm.) in DX-350-L.• Belt transmission.• Adjustable accessories (see page 164):

Special DX decks for 5 1/8” (130 mm.) high cutting in one stroke.Roller table extension (Ref. 57940).Ceramic fixing accessory for DX-350 (Ref. 57946).

DX-350

(Photo DX-350)

DIAMANT DX-350Single-phase motor3 HP-2.2 kW2.6 HP-1.9 kW*


1 **1

230 V 50 Hz. 8413797549201 54920230 V 50 Hz. UK 8413797549218 54921230 V 50 Hz. CH* 8413797549300 54930

220 V 60 Hz. 8413797549256 54925120 V 50 Hz. UK 8413797549225 54922120 V 60 Hz. USA 8413797549232 54923

230 V 50 Hz. 8413797549317 54931220 V 60 Hz. 8413797549294 54929

380 V 50 Hz. 8413797549263 54926380 V 60 Hz. 8413797549270 54927

DIAMANT DX-350-LSingle-phase motor3 HP-2.2 kW2.6 HP-1.9 kW*


1 **1

230 V 50 Hz. 8413797549607 54960230 V 50 Hz. UK 8413797549614 54961230 V 50 Hz. CH* 8413797549706 54970

220 V 60 Hz. 8413797549652 54965120 V 50 Hz. UK 8413797549621 54962120 V 60 Hz. USA 8413797549638 54963

230 V 50 Hz. 8413797549713 54971220 V 60 Hz. 8413797549690 54969

380 V 50 Hz. 8413797549669 54966380 V 60 Hz. 8413797549676 54967



Upper motor.

Plunge cut.

DIAMANT DX REFREF

RPM

DX-350 2800 *32” 23 x 23” 4 / 9’’ — 14’’ 57’’x25’’x59’’ 287.7 Lb 319.7 Lb •(*82,5 cm.) (58x58 cm.) (111 / 232 mm.) (350 mm.) (145x64x151 cm.) (130,5 kg.) (145 kg.)

DX-350-L 2800 *49” 35 x 35” 4 / 9’’ — 14’’ 75’’x34’’x59’’ 418.9 Lb 582 Lb •(*124,5 cm.) (88x88 cm.) (111 / 232 mm.) (350 mm.) (193x87x151 cm.) (190 kg.) (264 kg.)


159

Electric saws Diamant DT

• For ceramic tiles and all types of building materials such as brick,facebrick, firebrick, etc.

• With thermic and overload security switches.• Water pump refrigeration of blade (with flow control valve).• Diamond blade Ø 10” (250 mm.) not included.• Vertically mobile head with plunge cut and fold-away for miter cuts.• Electric cable: 4.9 ft. (1,5 m.).

• With guide to allow repetitive cuts.• With table 17” x 15” ( 44 x 40 cm.). • Belt transmission.• The saw allows a 10 1/2” (26 cm.) tile to be cut in half. • Adjustable accessories: (see page 164)

Support table (Ref. 50935).Cleaning block (Ref. 05973).

DT-250

DIAMANT DT-250Single-phase motor2 HP-1.5 kW1.5 HP-1.1 kW*

1 **1


220 V 60 Hz. 8413797589054 58905120 V 50 Hz. U.K.* 8413797589023 58902120 V 60 Hz. USA* 8413797589122 58912230 V 50 Hz. DK 8413797589191 58919


Lateral Stop


Belt drive.

DIAMANT DT REFREF

RPM

DT-250 2800 *21” 14 x 14” 3” / 4” — 10’’ 33”x21’’x24’’ 119 Lb. 152.1 Lb •(*52 cm.) (37x37 cm.) (60 / 110 mm.) (250 mm.) (85x54x61 cm.) (54 kg.) (69 kg.)


160


• With thermal and overload protection devices.• Water pump refrigeration of blade (with flow control valve).

diamond Blade Ø 12” (300 mm.) – 14” (350 mm.) not included.• Vertically mobile head with plunge cut capability

and foldable head for miter cuts.• Electric cable: 4.9 ft. (1,5 m.)

• With guide to allow repetitive cuts.• Large sliding table 22 7/8” x 20 2/3” (58 x 52 cm.)

mounted on sealed bearings.• Direct drive.• The saw allows a 12 1/2” (31,5cm.) tile to be cut in half• Adjustable accessories (see page 164


DR-300-EN

Electric saws Diamant DR-EN

DIAMANT DR-300-ENSingle-phase motor3 HP-2.2 kW2.6 HP-1.9 kW*


1 1**

230 V 50 Hz. 8413797589702 58970230 V 50 Hz. UK 8413797589719 58971230 V 50 Hz. CH* 8413797589603 58960

240 V 50 Hz. AUSTR. 8413797589658 58965220 V 60 Hz. 8413797589757 58975120 V 50 Hz. UK 8413797589726 58972120 V 60 Hz. USA 8413797589733 58973

230 V 50 Hz. 8413797589610 58961220 V 60 Hz. 8413797589795 58979

380 V 50 Hz. 8413797589764 58976380 V 60 Hz. 8413797589771 58977

* Using plunge cut effect. ** Useful cutting height: 1 stroke 4 5/8” (117 mm) with Ø 14” (350 mm) disc.




DIAMANT DR-EN REFREF

RPM

DR-EN 2800 *30’’ 17 x 17” 3 5/8’’ / 6’’ — 12’’ - 14’’ 43’’ x 27’’ x 52’’ 169.9 Lb. 220.5 Lb. •(*76 cm.) (44x44 cm.) (92 / 150 mm.) (300-350 mm.) (111x71x130 cm.) (77 kg.) (100 kg.)


161


• With thermal and overload protection devices.• Water pump refrigeration of blade (with flow control valve).

diamond Blade Ø 12” (300 mm.) – 14” (350 mm.) not included.• Vertically mobile head with plunge cut capability

and foldable head for miter cuts.• Electric cable: 4.9 ft. (1,5 m.)

• With guide to allow repetitive cuts.• Large sliding table 22 7/8” x 20 2/3” (58 x 52 cm.)

mounted on sealed bearings.• Direct drive.• The saw allows a 12 1/2” (31,5cm.) tile to be cut in half• Adjustable accessories (see page 164):


Electric saws Diamant DR

DR-300

DIAMANT DR-300Single-phase motor3 HP-2.2 kW2.6 HP-1.9 kW*


1 1**

230 V 50 Hz. 8413797569209 56920240 V 50 Hz. AUSTR. 8413797569353 56935230 V 50 Hz. UK 8413797569216 56921230 V 50 Hz. CH* 8413797569308 56930

220 V 60 Hz. 8413797569254 56925120 V 50 Hz. UK 8413797569223 56922120 V 60 Hz. USA 8413797569322 56932230 V 50 Hz. DK. 8413797569360 56936

230 V 50 Hz. 8413797569315 56931220 V 60 Hz. 8413797569292 56929

380 V 50 Hz. 8413797569261 56926380 V 60 Hz. 8413797569278 56927

* Using plunge cut effect. ** Useful cutting height: 1 stroke 4 5/8” (117 mm) with Ø 14” (350 mm) disc.




DIAMANT DR REFREF

RPM

DR-300 2800 *30’’ 17 x 17” 3 5/8’’ / 6’’ — 12’’ - 14’’ 43’’ x 27’’ x 52’’ 183.9 Lb. 237.7 Lb. •(*76 cm.) (44x44 cm.) (92 / 150 mm.) (300-350 mm.) (111x71x130 cm.) (83.4 kg.) (106 kg.)


162

Electric Saws

163

Electric Saws

164

Accessories for Electric Saws

Ref. 05973 Ref. 45345 Ref. 45880

Ref. 57990/91/54939 Ref. 57945/46 Ref. 57947/48Ref. 45434/534

ACCESSORIES FOR ELECTRIC SAWS REF

CERAMIC BLOCK 5 8413797059731 05973• For cleaning of diamond blades.

DIAGONAL CUTTING GUIDES

• Fixed 45º. Plastic. 1 8413797453454 45345• 0 to 90º adjustable guide. Metallic. 1 8413797458800 45880• For portable saws D-200 and ND-180/200/300.

WATER TRAY

• For ND-180-E/180/200. 1 8413797454342 45434• Dimensions: 22 x 21 x 1” (56 x 55 x 2,5 cm.).

WATER TRAY

• For ND-300. 1 8413797455342 45534• Dimensions: 27 x 25 x 1” (71 x 65 x 2,5 cm.).

SET OF DECK SPECIAL FOR MITRING CUTS

• Special set of deck for mitering cuts. To create cuts in mitering judge accuracy. 1 8413797579918 57991• For machines DS-230-LPS, DS-250-EP, DW-LPS and DW-N.

SET OF DECK SPECIAL FOR MITRING CUTS 1 8413797579901 57990• Special set of deck for mitering cuts. To create cuts in mitering judge accuracy.• For machines DS-250/250-L and DS-300/300-L.

DX SPECIAL DECKS 1 8413797549393 54939• Small diameter decks connectable to DX-350

and DX-350-L for making higher cuts.

DS-250 CERAMIC FIXING

FOR MACHINES BEFORE 2003 (includes table and securing). 1 8413797579451 57945FOR MACHINES AFTER 2003 (only includes securing). 1 8413797579475 57947• DS-250 mounting for ceramic fixing and perfect measurement

of the whole length of the cut. Guarantees a perfect finish with no size error.• Indicate reference and series number of tile cutter before making order.

DS-300 AND DX-350 CERAMIC FIXING

FOR MACHINES BEFORE 2003 (includes table and securing). 1 8413797579468 57946FOR MACHINES AFTER 2003 (only includes securing). 1 8413797579482 57948• DS-300 and DX-350 mounting for ceramic fixing and perfect measurement

of the whole length of the cut. Guarantees a perfect finish with no size error.• Indicate reference and series number of tile cutter before making order.

WATER PUMP B101 1• For DIAMANT D, DR, DS, DT and DX and for the electric cleaner SPOMATIC.

230 V 50 Hz. 8413797569902 56990220 V 60 Hz. 8413797569919 56991120 V 50 Hz. 8413797569926 56992120 V 60 Hz. 8413797569933 56993

WATER PUMP B100 1• For DIAMANT DU and DW.

230 V 50 Hz. 8413797569865 56986220 V 60 Hz. 8413797569872 56987120 V 50 Hz. 8413797569889 56988120 V 60 Hz. 8413797569896 56989

SUPPORT TABLE 1 8413797509359 50935• New reinforced structure for greater stability.• For DT-250, DU-200/200-L and DW-200/200-L.• Dimensions: 26 x 20 x 28” (67 x 53 x 72 cm.).

ROLLER TABLE EXTENSION 1 8413797579406 57940• For electric cutter DS-230-LPS, DS-250/FC/L, DS-300/FC/L, DU-200/200-L,

DW-200/L/LP/LPS, DW-250-LPS and DX-350/350-L.• With rollers to simplify movement of the tiles.• With adjustable fold-away legs.• Dimensions: 20 x 22 x 3” (51 x 56 x 8 cm.)..

• For other accessories and any replacements, verify in the exploding for each machine.

SPARE PARTS FOR ELECTRIC SAWS REF

165

Accessories for Electric Saws

Ref. 57940

Ref. 50935

B-101B-100

Ref. 50935

electric saws - universal constructuniversalconstruct.ro/...the latest generation of electric saws...

Documents