electrical data - intense lighting l3 10w 16w 20w 26w 3000k / 82 cri 3000k / 82 cri ... 6’ 8 ’...
TRANSCRIPT
MXG2ARTR3.5” MX G2 LED Adjustable
FEATURES ■ Multiple architectural trim options ■ High center beam spot up to 24,500 CBCP ■ Field changeable optics: 9°, 12°, 24°, 36°, 50°
LED LIGHT ENGINE ■ 92 CRI & 82 CRI in 2700K, 3000K, 3500K and 4100K with 2 SDCM binning
■ 50,000 hours L70 (rated life at 70% output)
ELECTRICAL SYSTEM ■ Multiple dimming drivers available ■ 120V or 277V input; Power factor >.9, 50/60Hz ■ This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Additional surge protection recommended. Damage from power surge is not covered by warranty.
HOUSINGHeavy duty black powder coated 18 gauge steel frame. Standard plaster frame accommodates 5/8” ceiling thickness. Extended collar options available for ceilings up to 1” or 2” thick, must specify either EC1 or EC2.
TRIM SPECIFICATIONAiming with locking 35° vertical and 360° horizontal adjustment. High quality trims are die-cast using A380 aluminum with durable powder coat available in multiple finishes. Architectural, discrete self flange or painted white flange options available. Trims available in 1” regress for greater visual comfort or 1/2” regress for consistent look throughout space.
INSTALLATIONHousing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3” away from insulation. Butterfly brackets are compatible with C-channel, adjustable bar hangers (14”-25”) and EMT. C-channel is recommended for T-bar ceilings. Bar hangers must be ordered separately. Max. ambient temperature: 131°F (55°C).
EMERGENCY BACKUPRemote test switch included. External battery operates LED load at a minimum of 500 to 850 lumens for 90 minutes, depending on backup wattage selected. See trim multipliers for detailed performance. Servicing requires above ceiling access.
ACCESSORIESLuminaire will accommodate (2) accessories, accessory holder required, see page 2.
LISTING / WARRANTY ■ 5-Year Intense LED Limited Warranty ■ ETL listed to US and Canadian standards for damp locations ■ (-IC/CP Only) Air-Tight Certified ASTM E283 ■ (-IC/CP Only) ETL listed for direct contact w/insulation ■ (-CP Only) CCEA Chicago Plenum ■ ENERGY STAR® Qualified 1
■ Can be used to comply with 2016 Title 24-Part 6 High Efficacy LED Light Source Requirements 2
21
ELECTRICAL DATA
LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt
L0L1L2L3
10W16W20W26W
3000K / 82 CRI3000K / 82 CRI3000K / 82 CRI3000K / 82 CRI
950lm1300lm1550lm1850lm
95817871
* System wattage includes driver and LED module consumption.** Delivered lumens will vary depending on trim, CCT, CRI, optic and ceiling thickness
1/2”
3 1/2”
4 1/2”
Housing dimensions are on Page 2
MXTG2-RTRA300(1” Regress)
3 1/2”
4 1/2”
1”
B W SN
Available finishes
AB WH
B W SN
Available finishes
AB WH
0.15” trim thickness
0.15” trim thickness
MXTG2-RTRR300(1/2” Regress)
Notes:1. ENERGY STAR® Qualified (White reflectors only;
Excludes: L2, L3, 92 CRI & 9° options)2. Excludes: L2, L3, 82 CRI & 9° options3. L3 available with Non-IC housings only4. Available in 120V only5. Available in L0, L1 & L2 only6. DMX512 RDM not available in L0 & L17. Access above ceiling required8. Not available in L09. Consult factory for lead times10. 9° Narrow spot not available in L2 & L3
Housing Part Number (Example: MXG2ARTR-ICL1)
Housing Installation Type Ceiling Thickness Wattage Dimming Voltage Options
MXG2ARTR -NC-IC-CP
(Non-IC)(Air-Tight IC)(Chicago Plenum)
blankEC1EC2
(5/8”)(1”)(2”)
L0L1L2L33
(10W)(16W)(20W)(26W)
blankDELV4
D101ED10V15
ED10V015
LUT1LUTEDALI15
EDALI015
DMXR6
(Non-Dimming)(Phase Dimming)(0-10V Dimming 1%)(eldoLED 0-10V 1%)(eldoLED 0-10V 0.1%)(Lutron Hi-Lume® 1%)(Lutron EcoSystem® 1%)(eldoLED DALI 1%)(eldoLED DALI 0.1%)(DMX512 RDM 0.1%)
blank27
(120V)(277V)
I100I200I400EM77
EM127, 8
(C-Channel Bar Hangers)(Flat Bar Hangers)(Wood Joist Bar Hangers)(7W Emergency BackupIOTA Part #ILB-CP07-A)(12W Emergency BackupIOTA Part #ILB-CP12-A)
Trim Part Number (Example: MXTG2-RTRA300W-SFL13024)
Trim Finish Wattage CCT / CRI Optic
MXTG2-RTRA300 (1” Regress)MXTG2-RTRR300(1/2” Regress)
B-SFB-SFWW-SFSN-SFSN-SFW9
AB-SFAB-SFW9
WH-SFWH-SFW9
(Black / Self Flanged)(Black / Self Flanged White)(White / Self Flanged)(Satin Nickel / Self Flanged)(Satin Nickel / Self Flanged White)(Antique Bronze / Self Flanged)(Antique Bronze / Self Flanged White)(Wheat / Self Flanged)(Wheat / Self Flanged White)
L0L1L2L33
(10W)(16W)(20W)(26W)
27279303093535941419
(2700K / 82 CRI)(2700K / 92 CRI)(3000K / 82 CRI)(3000K / 92 CRI)(3500K / 82 CRI)(3500K / 92 CRI)(4100K / 82 CRI)(4100K / 92 CRI)
0910
12243650
(9° Narrow Spot)(12° Spot)(24° Narrow Flood)(36° Flood)(50° Wide Flood)
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-1
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
35°
MXG2ARTR3.5” MX G2 LED Adjustable
4 1/4”
5 3/8”
12”
12”7 3/4”
NON-IC & AIR TIGHT IC DIMENSIONS
CCEA CHICAGO PLENUM DIMENSIONS
Ceiling Cut Out: 4 1/8”
5/8” StandardEC1 = 1”EC2 = 2”
12”
12”7 3/4”
4 1/4”
7 1/4”
5/8” StandardEC1 = 1”EC2 = 2”
35°
Ceiling Cut Out: 4 1/8”
ACCESSORIESLuminaire will accommodate (2) accessories, accessory holder required.
INSTALLATION1. Rotate release cap by turning counter clockwise.2. Install accessories into accessory holder and replace accessory holder’s retaining clip.3. Place accessory holder and accessory flush against optic and replace release cap.
OPTICS REPLACEMENT1. Rotate release cap by turning counter clockwise.2. Install accessories into accessory holder and replace accessory holder’s retaining clip.3. Place accessory holder and accessory flush against optic and replace release cap.
Release cap
Accessory holder
Release cap
Accessories
Retainer ring
Accessory holder’s retaining clip
Optic
Module
Accessories
LH47LH47WPFLMB-47PFL1-47PFL2-47PFL4-47
(Accessory Holder, Black)(Accessory Holder, White)(Hex Louver, Black)(Prismatic Spread Lens)(Linear Spread Lens)(Soft Focus Lens)
Optics
IP-OP4712IP-OP4724IP-OP4736IP-OP4750
(12° Spot)(24° Narrow Flood)(36° Flood)(50° Wide Flood)
Plaster Frame Accommodation
Collar Type Standard EC1 EC2
Max Ceiling Thickness Up-to 5/8” Up-to 1” Up-to 2”
Plaster Frame Accommodation
Collar Type Standard EC1 EC2
Max Ceiling Thickness Up-to 5/8” Up-to 1” Up-to 2”
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-2
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD0° HORIZONTAL 35° HORIZONTAL 35° VERTICAL
D FC W L D C FC W L D C FC W L
MXTG2-RTRA300WL03000K
12° Spot
6’8’
10’12’
37721213694.2
1.21.61.92.3
1.21.61.92.3
6’8’
10’12’
4578
20210374.650.5
1.72.52.9
3.47
1.351.812.432.92
3’4’5’6’
4678
38720214596.8
1.121.351.581.98
1.862.552.943.61
MXTG2-RTRA300WL03000K
24° Narrow Flood
6’8’
10’12’
12570.345
31.2
2.53.44.25
2.53.44.25
6’8’
10’12’
4567
71.241.126.318
3.394.395.526.69
2.973.764.725.75
3’4’5’6’
4568
14180.450.635.4
22.693.44.02
3.274.265.356.36
MXTG2-RTRA300WL03000K
36° Flood
6’8’
10’12’
75.342.427.118.8
3.64.75.97.1
3.64.75.97.1
6’8’
10’12’
3456
5028.218
12.5
4.195.546.938.32
3.684.976.187.39
3’4’5’6’
3567
92.252.734.624.3
2.813.524.485.23
4.035.336.57.71
MXTG2-RTRA300WL03000K
50° Wide Flood
6’8’
10’12’
29.116.410.55.8
5.67.49.311.1
5.67.49.311.1
6’8’
10’12’
2345
22.212.98.35.8
5.326.848.4910.14
5.166.728.3810.01
3’4’5’6’
3456
43.124.315.510.8
3.534.755.957.12
4.495.97.448.87
APPLICATION DATA:
W and L are the outer points where the candle power drops to 50% of maximum. FC are the initial foot candles at the center of the beam.
W Beam widthL Beam lengthC Distance to center of beamD DistanceFC Footcandles
Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.
279
558
837
1116 10° 20°
50° Wide Flood (50)
Watts: 10Lumens: 836 LPW: 84 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
1049111198857122257
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
13572757856695345
3393
6786
10179
13572 10°
80°
70°
60°
50°
40°
30°20°
12° Spot (12)
Watts: 10Lumens: 783 LPW: 78 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
450039821402227253
1125
2250
3375
4500 10°
80°
70°
60°
50°
40°
30°20°
24° Narrow Flood (24)
Watts: 10Lumens: 875 LPW: 87 CCT: 3000K
80°
70°
60°
50°
40°
693
1386
2078
2771 10° 20°
36° Flood (36)
Watts: 10Lumens: 964 LPW: 96 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
271127421629457726
80°
70°
60°
50°
40°
30° 30°
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
35°
35°
MXTG2-RTRA300WL0Report #: ILL-01262016-39 (12) ILL-01262016-42 (24) ILL-01262016-45 (36) ILL-01262016-48 (50)
MXTG2-RTRA300Ceiling Thickness Multipliers: 5/8” Thickness (x 1.00)1” Thickness (x 0.87)2” Thickness (x 0.74)
MXTG2-RTRR300Ceiling Thickness Multipliers: 5/8” Thickness (x 0.80)1” Thickness (x 0.69)2” Thickness (x 0.58)
CCT MULTIPLIERS: 82 CRI 92 CRI2700K (x 0.93) (x 0.76)3000K (x 1.00) (x 0.87)3500K (x 1.00) (x 0.87)4100K (x 1.00) (x 0.87)
EMERGENCY MULTIPLIER: 7W Emergency (x 0.70)
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-3
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD0° HORIZONTAL 35° HORIZONTAL 35° VERTICAL
D FC W L D C FC W L D C FC W L
MXTG2-RTRA300WL13000K
12° Spot
6’8’
10’12’
527297190132
1.21.51.92.3
1.21.51.92.3
6’8’
10’12’
4578
28214310470.4
1.692.52.893.48
1.351.812.422.91
3’4’5’6’
4678
540282203135
1.121.341.571.98
1.852.542.923.6
MXTG2-RTRA300WL13000K
24° Narrow Flood
6’8’
10’12’
17598.362.943.7
2.53.34.14.9
2.53.34.14.9
6’8’
10’12’
4567
99.557.336.625.1
3.334.345.456.59
2.923.694.625.63
3’4’5’6’
4568
19711270.449.3
1.952.643.353.92
3.224.195.286.28
MXTG2-RTRA300WL13000K
36° Flood
6’8’
10’12’
89.950.632.422.5
3.85.16.47.7
3.85.16.47.7
6’8’
10’12’
3456
60.534
21.815.1
4.375.767.228.66
3.865.246.557.78
3’4’5’6’
3457
11464.241.128.5
2.93.664.765.6
4.055.456.788.14
MXTG2-RTRA300WL13000K
50° Wide Flood
6’8’
10’12’
42.323.815.210.6
5.47.29
10.8
5.47.29
10.8
6’8’
10’12’
3345
31.818.311.88.2
5.276.838.4810.17
5.066.6
8.239.89
3’4’5’6’
3456
61.934.822.315.5
3.464.665.786.97
4.475.897.388.82
APPLICATION DATA:
W and L are the outer points where the candle power drops to 50% of maximum. FC are the initial foot candles at the center of the beam.
W Beam widthL Beam lengthC Distance to center of beamD DistanceFC Footcandles
403
806
1209
1612 10° 20°
50° Wide Flood (50)
Watts: 15.6Lumens: 1163 LPW: 75 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
15231607139778230177
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
1898010528788131477
4745
9490
14235
18980 10°
80°
70°
60°
50°
40°
30°20°
12° Spot (12)
Watts: 15.6Lumens: 1088 LPW: 70 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
629255361898304324
1573
3146
4719
6292 10°
80°
70°
60°
50°
40°
30°20°
24° Narrow Flood (24)
Watts: 15.6Lumens: 1190 LPW: 76 CCT: 3000K
35°
35°
80°
70°
60°
50°
40°
817
1633
2450
3266 10° 20°
36° Flood (36)
Watts: 15.6Lumens: 1303 LPW: 84 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
32363217212168713614
80°
70°
60°
50°
40°
30° 30°
Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.
MXTG2-RTRA300WL1Report #: ILL-01262016-15 (12) ILL-01262016-18 (24) ILL-01262016-21 (36) ILL-01262016-24 (50)
MXTG2-RTRA300Ceiling Thickness Multipliers: 5/8” Thickness (x 1.00)1” Thickness (x 0.87)2” Thickness (x 0.74)
MXTG2-RTRR300Ceiling Thickness Multipliers: 5/8” Thickness (x 0.80)1” Thickness (x 0.69)2” Thickness (x 0.58)
CCT MULTIPLIERS: 82 CRI 92 CRI2700K (x 0.93) (x 0.76)3000K (x 1.00) (x 0.87)3500K (x 1.00) (x 0.87)4100K (x 1.00) (x 0.87)
EMERGENCY MULTIPLIER: 7W Emergency (x 0.50)12W Emergency (x 0.85)
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-4
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD0° HORIZONTAL 35° HORIZONTAL 35° VERTICAL
D FC W L D C FC W L D C FC W L
MXTG2-RTRA300WL23000K
12° Spot
6’8’
10’12’
601338216150
1.31.72.12.5
1.31.72.12.5
6’8’
10’12’
4578
34118511985.1
1.782.483.163.64
1.371.772.683.05
3’4’5’6’
4678
672341237168
1.111.381.672.04
1.892.633.143.7
MXTG2-RTRA300WL23000K
24° Narrow Flood
6’8’
10’12’
27115297.567.7
2.33
3.84.5
2.33
3.84.5
6’8’
10’12’
4568
15386.854.938.3
3.124.075.146.14
2.713.464.385.3
3’4’5’6’
4578
30216810775.6
1.792.53.163.66
3.044.03
55.89
MXTG2-RTRA300WL23000K
36° Flood
6’8’
10’12’
10860.738.827
3.95.26.57.8
3.95.26.57.8
6’8’
10’12’
3456
72.740.926.218.2
4.385.787.258.66
3.895.286.597.84
3’4’5’6’
3456
13777.349.434.3
2.913.7
4.795.63
4.055.466.88.13
MXTG2-RTRA300WL23000K
50° Wide Flood
6’8’
10’12’
39.822.414.310
681012
681012
6’8’
10’12’
2345
30.417.411.17.7
5.276.98.61
10.33
5.317.018.7610.52
3’4’5’6’
3456
56.531.820.314.1
3.745.016.317.56
4.566.017.579.04
APPLICATION DATA:
W and L are the outer points where the candle power drops to 50% of maximum. FC are the initial foot candles at the center of the beam.
W Beam widthL Beam lengthC Distance to center of beamD DistanceFC Footcandles
363
726
1088
1450 10° 20°
50° Wide Flood (50)
Watts: 20.8Lumens: 1230 LPW: 59 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
143214471338837355110
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
21637135188171756910
5409
10818
16228
21637 10°
80°
70°
60°
50°
40°
30°20°
12° Spot (12)
Watts: 20.4Lumens: 1346 LPW: 66 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
974682062395275344
2436
4873
7309
9746 10°
80°
70°
60°
50°
40°
30°20°
24° Narrow Flood (24)
Watts: 20.4Lumens: 1549 LPW: 76 CCT: 3000K
35°
35°
80°
70°
60°
50°
40°
974
1948
2922
3897 10° 20°
36° Flood (36)
Watts: 20.4Lumens: 1576 LPW: 77 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
38843842257983217014
80°
70°
60°
50°
40°
30° 30°
Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.
MXTG2-RTRA300WL2Report #: ILL-01262016-27 (12) ILL-01262016-30 (24) ILL-01262016-33 (36) ILL-02102016-06 (50)
MXTG2-RTRA300Ceiling Thickness Multipliers: 5/8” Thickness (x 1.00)1” Thickness (x 0.87)2” Thickness (x 0.74)
MXTG2-RTRR300Ceiling Thickness Multipliers: 5/8” Thickness (x 0.80)1” Thickness (x 0.69)2” Thickness (x 0.58)
CCT MULTIPLIERS: 82 CRI 92 CRI2700K (x 0.93) (x 0.76)3000K (x 1.00) (x 0.87)3500K (x 1.00) (x 0.87)4100K (x 1.00) (x 0.87)
EMERGENCY MULTIPLIER: 7W Emergency (x 0.40)12W Emergency (x 0.68)
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-5
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD
WL
FC
D
FC
D
LC W
L
W
D
C
D
L
W
C
L
W
CD0° HORIZONTAL 35° HORIZONTAL 35° VERTICAL
D FC W L D C FC W L D C FC W L
MXTG2-RTRA300WL33000K
12° Spot
6’8’
10’12’
686386247172
1.31.72.22.6
1.31.72.22.6
6’8’
10’12’
4578
38721213696.7
1.832.53.193.74
1.411.842.723.11
3’4’5’6’
4678
753387271188
1.111.411.722.19
1.922.73.23.81
MXTG2-RTRA300WL33000K
24° Narrow Flood
6’8’
10’12’
30917411177.2
2.43.24
4.7
2.43.24
4.7
6’8’
10’12’
4568
17610163.743.9
3.224.185.36.39
2.83.574.535.5
3’4’5’6’
4568
34719612386.8
1.882.563.283.8
3.134.15.156.08
MXTG2-RTRA300WL33000K
36° Flood
6’8’
10’12’
15084.654.237.6
3.54.75.87
3.54.75.87
6’8’
10’12’
3456
96.654.334.824.1
4.175.526.898.27
3.644.936.097.34
3’4’5’6’
3567
17710367.347.1
2.83.464.375.16
4.025.246.437.65
MXTG2-RTRA300WL33000K
50° Wide Flood
6’8’
10’12’
52.429.518.913.1
681012
681012
6’8’
10’12’
2345
39.922.814.610.1
5.286.928.6210.36
5.337.018.74
10.54
3’4’5’6’
3456
74.341.826.718.6
3.745.016.37.53
4.556
7.579.01
APPLICATION DATA:
W and L are the outer points where the candle power drops to 50% of maximum. FC are the initial foot candles at the center of the beam.
W Beam widthL Beam lengthC Distance to center of beamD DistanceFC Footcandles
477
954
1431
1908 10° 20°
50° Wide Flood (50)
Watts: 26.6Lumens: 1616 LPW: 61 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
1887190517581099467144
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
24710158688851937412
6177
12355
18532
24710 10°
80°
70°
60°
50°
40°
30°20°
12° Spot (12)
Watts: 26.3Lumens: 1571 LPW: 60 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
1112196542982345405
2780
5560
8341
11121 10°
80°
70°
60°
50°
40°
30°20°
24° Narrow Flood (24)
Watts: 26.3Lumens: 1889 LPW: 72 CCT: 3000K
35°
35°
80°
70°
60°
50°
40°
1364
2727
4091
5454 10° 20°
36° Flood (36)
Watts: 26.3Lumens: 1854 LPW: 70 CCT: 3000K
Candelas at Nadir
Degree Candela
0°5°15°25°35°45°
54185336309484515013
80°
70°
60°
50°
40°
30° 30°
Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.
MXTG2-RTRA300WL3Report #: ILL-01262016-12 (12) ILL-01262016-09 (24) ILL-01262016-03 (36) ILL-02102016-05 (50)
MXTG2-RTRA300Ceiling Thickness Multipliers: 5/8” Thickness (x 1.00)1” Thickness (x 0.87)2” Thickness (x 0.74)
MXTG2-RTRR300Ceiling Thickness Multipliers: 5/8” Thickness (x 0.80)1” Thickness (x 0.69)2” Thickness (x 0.58)
CCT MULTIPLIERS: 82 CRI 92 CRI2700K (x 0.93) (x 0.76)3000K (x 1.00) (x 0.87)3500K (x 1.00) (x 0.87)4100K (x 1.00) (x 0.87)
EMERGENCY MULTIPLIER: 7W Emergency (x 0.35)12W Emergency (x 0.59)
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-6
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
DIMMING COMPATIBILITY
DRIVERINPUT
GREY (-)
0-10V DIMMER
BLACK - NEGATIVE
LED LIGHT ENGINE
RED - POSITIVE
VIOLET (+)
BLACK
WHITE
GREEN
FORWARD / REVERSE PHASE DIMMING ■ 120V only ■ See chart below for minimum dimming levels ■ Consult dimming manufacturer for installation instructions
DRIVER
120V INPUT FROM
DIMMERBLACK - NEGATIVE
LED LIGHT ENGINE
RED - POSITIVEBLACK
WHITE
GREEN
DMX512 RDM DIMMING ■ 120V or 277V ■ Dims down to 0.1% light output ■ RDM channel programmable
LED LIGHT ENGINE
LED LIGHT ENGINE
DMX512 IN
120 OR 277V INPUT
120 OR 277V INPUT
DRIVER
DRIVER
BLACK
WHITE
GREEN
ORANGE (DMX -)
ORANGE/WHITE (DALI DA)
BROWN (DMX GROUND)
BLACK - NEGATIVE
RED - POSITIVE
ORANGE/WHITE (DMX +)
ORANGE (DALI DA)
BLACK
WHITE
GREENBLACK - NEGATIVE
RED - POSITIVE
COMPATIBLE DIMMERS MX MODULE DIMS DOWN TOProduct Part Number(s) Type L0 L1 L2 L3Leviton IPE04 Reverse 8% 6% 8% 8%Leviton IPI06-1LZ Forward - 1% 1% 1%Leviton 6633-P Forward 1% 1% 1% -Lutron DVELV300P Reverse 8% 6% 9% 9%Lutron DVCL-153P Forward 1% 1% 1% 1%Lutron S600P Forward 3% 1% 2% 2%Cooper DLC03P Forward - 1% 1% 2%Cooper DAL06P Forward - 1% 1% 1%
DALI DIMMING ■ 120V or 277V ■ Dims down to 1% or 0.1% light output
0-10V DIMMING ■ 120V/277V ■ Dims down to 1% or 0.1% light output ■ Consult dimming manufacturer for installation instructions and power packs
COMPATIBLE DIMMERSManufacturer Part Number(s)HUNT PS-010-IV-120V, PS-010-WH-120V, PS-010-3W-IV-120, PS-010-3W-WH-120V, PS-010-IV-277V, PS-010-WH-277V, PS-010-3W-IV-277V, PS-010-3W-WH-277V, FD-010: PS-IFC-010-IV, PS-IFC-010-WH-120/277V, FD-010: PS-IFC-010-3W-IV, PS-IFC-010-3W-WH-120/277V, FD-010-120V, FD-010-277VLeviton Leviton Centura Fluorescent Control System, IllumaTech™ IP7 Series, DPSPE-212Lightolier ZP600FAM120, MP1500FAM120, V2000FAMULithonia LEQ BC, LEQ LVBC, SLD LVBC, SQ1DCLutron DVTV, NTFTVSynergy ISD BC 120/277
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-97
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.
DIMMING COMPATIBILITY
LUTRON ECOSYSTEM® DIMMING ■ 120V or 277V ■ Dims down to 1% ■ Consult dimming manufacturer for installation instructions
COMPATIBLE DIMMERSProduct Part Number(s)EcoSystem CS-1L-WM, CS-2L-WM, CS-1L-CM, CS-2L-CM, EcoSystem ESN, Grafik Eye QS with EcoSystem, Quantum
DRIVER
3-WIRE CONTROL
(BY OTHERS)BLACK - NEGATIVE
LED LIGHT ENGINE
RED - POSITIVEBLACK
WHITE
GREEN
ORANGE
DRIVER
ECO SYSTEM
CONTROL (BY OTHERS)
ECO SYS BUS
BLACK - NEGATIVE
LED LIGHT ENGINE
RED - POSITIVE
VIOLET (E1)
VIOLET (E2)
BLACK
WHITE
GREEN
LUTRON HI-LUME® DIMMING ■ 120V or 277V ■ Dims down to 1% ■ Consult dimming manufacturer for installation instructions
COMPATIBLE DIMMERSAYF-103P, AYF-103P-277, DVF-103, DVF-103P-277, DVSCF-103P, DVSCF-103P-277, HQRD-F6AN-DV, LXF-103PL, LXF-103PL-277, NF-10, NF-103P, NF-103P-277, NF-10-277, NTF-10, NTF-103P, NTF-103P-277, NTF-10-277, RRD-F6AN-DV, SF-12P-277-3, SF-103P, MAF-6AM, MAF-6AM-277, MSCF-6AM, MCSF-6AM-277, MRF2-F6AN-DV, SF-10P, SF-12P-277, SPSF-6A, SPSF-6A-277, SPSF-6AM, SPSF-6AM-277, VF-10, VTF-6AM
JOB NAME
CATALOG NUMBER
NOTES TYPE
MX ADJUSTABLE L/M-1211:17 P-98
INTENSE LIGHTING | 3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883For Intense Lighting’s limited product warranty, go to www.intenselighting.com. For a printed copy of the warranty, you may call 800 961-5321.© 2017 Intense Lighting, LLC. All rights reserved. Note: This document is subject to change without notice.