electrical tools/wiring tools/hole cutting tools/drill bits/hole saws

Up-to-date price list:www.automationdirect.com/pricelist

FREE Technical Support:www.automationdirect.com/support

FREE Videos:www.automationdirect.com/videos

FREE Documentation:www.automationdirect.com/documentation

FREE CAD drawings:www.automationdirect.com/cad

Tools and Test Equipment

In this interactive PDF you can:•Use bookmarks to navigate

by product category

•Use bookmarks to save,search, print or e-mail thecatalog section

•Click on part #s to linkdirectly to our online storefor current pricing, specs,stocking information andmore

w w w . a u t o m a t i o n d i r e c t . c o m / t o o l s mTTE-1

For the latest prices, check AutomationDirect.com.


http://www.automationdirect.com/documentation

http://www.automationdirect.com/pricelist

http://www.automationdirect.com/support

http://www.automationdirect.com/videos

http://www.automationdirect.com

Ratchets, Screwdrivers & Torque Tools Top Wera quality at an AutomAtionDirect price!Wera is one of the world’s leading manufacturers of ratchets, scewdrivers and torque tools.

They are known for their attention to quality, ease of use, and a safety-friendly design.

They know you want to get the job done without having to fight your own tools for a good grip or tight hold. Now AutomationDirect is selling Wera tools in North America, bringing quality tools, that are already used daily around the world, to you at incredible prices.

Standard Screwdrivers Insulated Screwdrivers

Nutdrivers Screwdriver Sets

Chisel ScrewdriversBit Drivers andScrewdriver Bits

1 - 8 0 0 - 6 3 3 - 0 4 0 5mTTE-2



Joker Ratcheting Combination Wrenches

Ratchet and Socket Sets Zyklop Ratchets Torque Tools

Sockets Hexdriver L-Keys and T-Handles

Miniature Screwdrivers Koloss Hammer Ratchet




Tools

Safety PrecautionsInspect each tool BEFORE every use to ensure that it is in proper condition and not damaged.

Avoid risks for yourself and others by making sure your work environment is safe.

Always wear appropriate and approved eye protection.

Always use the right tool profiles for the corresponding screws (for example, Phillips #2 screwdriver for a Phillips #2 screw).

NEVER modify tools.

Only use tools for their intended function:• Never use screwdrivers as a lever.• Never use hand tools as power tool accessories.• Only use insulated tools and tools with appropriate IEC/VDE and GS symbols for working on live electrical applications.• If using VDE insulated tools, never exceed the maximum voltage ratings.• Do not expose the tools to extreme conditions such as extreme heat, which can alter the material properties of the tools and make them unsafe.

FeaturesHandle markings Handle markings include a screw symbol and the size of the tip to help you easily find the right screwdriver in your tool bag or at the workplace.

LasertipLaser treatment creates a microrough surface on the tip of the blade. The drive end literally bites into the head of the screw. The advantages: less slipping, fewer scratches, higher torque transfer and less screwdriving effort. For slotted, Phillips and Pozidriv screws.

Kraftform PlusThe shape that has been built by hand. The smooth hard zones allow the hand to easily glide during hand re-positioning. The easy-to-grip soft anti-slip zones ensure full force transfer to the screw.

Hex-PlusExtends the service life of hexagon socket screws by preventing internal wear. Hex-Plus provides more contact surface with the head of the screw, which reduces the notching effect to a minimum and prevents the rounding of the screw recess.

WERA Limited Lifetime WarrantyIn addition to our standard 30 day money back returns policy, WERA offers a limited lifetime warranty on all screwdrivers and wrenches. Driver bits and hex keys have a lifetime warranty against manufacturer’s defects.

1 - 8 0 0 - 6 3 3 - 0 4 0 5mTTE-4



Screwdrivers

Extra Durable (Black Point)

The Wera Black Point tip and a refined hardening process guarantee a long service life and increased corrosion protection.

Hex Plus Profile

The problem with hexagon socket screws is the easily “rounded” screw recess. This is caused by the sharp edges of the tool pressing against the inside of the screw profile. Gradual wear eventually grinds and destroys the head of the screw. Wera’s Hex-Plus tools provide more contact surface inside the screw profile, which reduces the notching effect and ultimately the deformation of the screw. Hex-Plus tools can also transfer up to 20% more TORQUE.

Kraftform Ergonomics

The Kraftform handle has been designed to fit snugly in your hand, making blisters and calluses a thing of the past even after long-term use. The hard materials used for the handle promote fast grip adjustments and prevent the skin from sticking to the handle. The softer, anti-slip zones facilitate zero-loss transfer of high forces. This is an unbeatable combi-nation! Work is done with a flick of the wrist!

ANTIROLL-OFF

LASERTIP

EXTRADURABLE

HEX-PLUS

Laser Tip

Laser treatment creates a microrough surface on the tip of the blade. The drive end literally bites into the head of the screw. The advantages: less slip-ping, fewer scratches, higher torque transfer and less screwdriving effort.

Anti-Rolloff

The hexagonal non-roll feature prevents any rolling away at the workplace.

Handle Markings

Handle markings include a screw symbol and the size of the tip to help you find the right screwdriver in your tool bag or at the work-place.

KRAFTFORMERGONOMICS

w w w . a u t o m a t i o n d i r e c t . c o m / t o o l s tTTE-1



Standard ScrewdriversKraftform Plus screwdrivers transfer more torque with less effort, relieving physical stress even during intensive use. Combined with other practical and technical product advantages, such as the lasertip for a secure fit in the screw, and greater cam-out protection, Kraftform screwdrivers are the perfect choice for manual work.

Standard Screwdrivers

Part Number Description Price Each

TW-SD-SET-1 Wera screwdriver set. 6 pieces. Wall mount rack included. Manufacturer part number 105650. $29.50

TW-SD-SL-1 Wera flat (slotted) screwdriver, 0.5 mm (0.02 inch) thick x 3mm (0.12 inch) wide x 80mm (3.15 inch) long blade. Manufacturer part number 110001. $2.75

TW-SD-SL-2Wera flat (slotted) screwdriver, 0.8 mm (0.03 inch) thick x 4mm (0.16 inch) wide x 100mm (3.94 inch) long blade with laser etched non-slip tip. Manufacturer part number 110004.

$3.75

TW-SD-SL-3Wera flat (slotted) screwdriver, 1mm (0.04 inch) thick x 5.5 mm (0.22 inch) wide x 125mm (4.92 inch) long blade with laser etched non-slip tip. Manufacturer part number 110007.

$6.00

TW-SD-SL-4Wera flat (slotted) screwdriver, 1.2 mm (0.05 inch) thick x 6.5 mm (0.26 inch) wide x 150mm (5.91 inch) long blade with laser etched non-slip tip. Manufacturer part number 110010.

$8.00

TW-SD-PH-1 Wera Phillips screwdriver, #1 x 80mm (3.15 inch) long blade with laser etched non-slip tip. Manufacturer part number 008710. $5.50

TW-SD-PH-2 Wera Phillips screwdriver, #2 x 100mm (3.94 inch) long blade with laser etched non-slip tip. Manufacturer part number 008720. $7.75

TW-SD-PH-3* Wera Phillips screwdriver, #0 x 60mm (2.36 inch) long blade. Manufacturer part number 008705. $4.25

05138262055* Wera tamper-proof TORX screwdriver, TX20 x 100mm (3.94 inch) long blade. Manufacturer part number 138262. $6.50

* TW-SD-PH-3 and 05138262055 have hardened Black Point tip instead of laser-etched non-slip tip.

TW-SD-PH-1

05008027055

ScrewdriversLIMITED

LIFETIME

TW-SD-SET-1

Extra Long Screwdrivers


05008715055 Wera Phillips extra long screwdriver, #1 x 300mm (11.81 inch) long blade. Manufacturer part number 008715. $6.75

05008730055 Wera Phillips extra long screwdriver, #2 x 300mm (11.81 inch) long blade. Manufacturer part number 008730. $9.00

05008027055Wera flat (slotted) extra long screwdriver, 0.8mm (0.03 inch) thick x 4mm (0.16 inch) wide x 300mm (11.81 inch) long blade. Manufacturer part number 008027.

$7.25

05008060055Wera flat (slotted) extra long screwdriver, 1mm (0.04 inch) thick x 5.5mm (0.22 inch) wide x 300mm (11.81 inch) long blade. Manufacturer part number 008060.

$8.00

TW-SD-Set-1 Contents

Slotted 3*, 4, 5.5, 6.5 mm

Phillips PH1, PH2

Note:* 3mm screwdriver does not have laser-etched non-slip tip.

EXTRADURABLE

ANTIROLL-OFF

KRAFTFORMERGONOMICS

LASERTIP

LASERTIP

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-2



http://www.automationdirect.com/pn/TW-SD-SET-1

http://www.automationdirect.com/pn/05138262055








http://www.automationdirect.com/pn/TW-SD-SL-1




http://www.automationdirect.com/pn/TW-SD-PH-1





Insulated ScrewdriversAs with all other Wera tools, safety is a top priority for series 100 VDE screwdrivers. The quality of the blades exceeds current standards with respect to hardness and torque strength.

Standard Shank Insulated Screwdrivers


TW-SD-SET-2 Wera insulated screwdriver set. 6 pieces. 1000 volt rating. Wall mount rack included. Manufacturer part number 006145. $33.50

TW-SD-VSL-1*Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 0.4 mm (0.016 inch) thick x 2.5 mm (0.10 inch) wide x 80mm (3.15 inch) long blade. Manufacturer part number 006100.

$4.50

TW-SD-VSL-2*Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 0.5mm (0.02 inch) thick x 3mm (0.12 inch) wide x 100mm (3.94 inch) long blade. Manufacturer part number 006105.

$4.75

TW-SD-VSL-3Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 0.8 mm (0.03 inch) thick x 4mm (0.16 inch) wide x 100mm (3.94 inch) long blade with laser etched non-slip tip. Manufacturer part number 006115.

$6.00

TW-SD-VSL-4Wera insulated flat (slotted) screwdriver, 1000V insulation rating, 1mm (0.04 inch) thick x 5.5 mm (0.22 inch) wide x 125mm (4.92 inch) long blade with laser etched non-slip tip. Manufacturer part number 006120.

$7.25

TW-SD-VPH-1Wera insulated Phillips screwdriver, 1000V insulation rating, #1 x 80mm (3.15 inch) long blade with laser etched non-slip tip. Manufacturer part number 006152.

$6.50

TW-SD-VPH-2Wera insulated Phillips screwdriver, 1000V insulation rating, #2 x 100mm (3.94 inch) long blade with laser etched non-slip tip. Manufacturer part number 006154.

$8.75

Note: *TW-SD-VSL-1 and TW-SD-VSL-2 do not have a Lasertip laser-etched non-slip tip.

TW-SD-SET-2

Standard Shank

ScrewdriversLIMITED

LIFETIME

TW-SD-Set-2 Contents

Slotted 2.5*, 3*, 4, 5.5 mm

Phillips PH1, PH2

Note: *2.5mm and 3mm screwdrivers do not have laser-etched non-slip tips.

KRAFTFORMERGONOMICS

VDETOOL

ANTIROLL-OFF

Tested for dielectric strength

Our screwdrivers are tested for dielectric strength under a 10,000 volt load in a water bath to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.

0500645055

Reduced Shank Insulated Screwdrivers


05006450055Wera insulated Phillips screwdriver with reduced diameter shank, 1000V insulation rating, #1 x 80mm (3.15 inch) long blade. Manufacturer part number 006450.

$8.50

05006451055Wera insulated Phillips screwdriver with reduced diameter shank, 1000V insulation rating, #2 x 100mm (3.94 inch) long blade. Manufacturer part number 006451.

$11.00

05006440055Wera insulated flat (slotted) screwdriver with reduced diameter shank, 1000V insulation rating, 0.6 mm (0.02 inch) thick x 3.5 mm (0.14 inch) wide x 100mm (3.94 inch) long blade. Manufacturer part number 006440.

$8.00

05006441055Wera insulated flat (slotted) screwdriver with reduced diameter shank, 1000V insulation rating, 0.8 mm (0.03 inch) thick x 4mm (0.16 inch) wide x 100mm (3.94 inch) long blade. Manufacturer part number 006441.

$8.50

05006442055Wera insulated flat (slotted) screwdriver with reduced diameter shank, 1000V insulation rating, 1mm (0.04 inch) thick x 5.5 mm (0.22 inch) wide x 125mm (4.92 inch) long blade. Manufacturer part number 006442.

$9.75

Reduced Diameter Shank

EXTRA SLIM

Extra Slim

Reduced blade diameter at the tip with inte-grated protective insulation, allows recessed screws and spring elements to be accessed and actuated, individually tested as per IEC 60900.

LASERTIP

LASERTIP





http://www.automationdirect.com/pn/TW-SD-VSL-1




http://www.automationdirect.com/pn/TW-SD-VPH-1

http://www.automationdirect.com/pn/TW-SD-VPH-2









Interchangeable Blades Screwdriver Sets


TW-SD-VDE-7Wera insulated screwdriver with interchangeable blades. 7 pieces. 1000V insulation rating. Durable cloth pouch included. Manufacturer part number 003470.

$35.50

05347108055 Wera insulated screwdriver set with interchangeable blades. 18 pieces. 100V Insulation, Durable cloth pouch included. Manufacturer part number 347108. $75.00

Insulated Driver Sets with Interchangeable BladesThe system “one handle - many inter-changeable blades” - makes Kraftform Kompakt VDE compact screwdriving sets for in-house as well as mobile elec-trical application out of the sets. The belt pouch is practical for tidy storage and transportation.

Screwdrivers LIMITEDLIFETIME

TW-SD-VDE-7

TW-SD-VDE-7 ContentsKraftform handle

Phillips PH1, PH2

Slotted 2.5, 3.5, 4.0, 5.5 mm

ANTIROLL-OFF

VDETOOL

KRAFTFORMERGONOMICS

05347108055 Contents

(2) Kraftform handles

Phillips PH1, PH2

Plus/Minus/Slotted/Phillips PH1, PH2

Plus/Minus/Slotted/Pozi® Drive

PZ1, PZ2

Slotted 2.5, 3.5, 4.0. 5.5 mm

Square #1, #2

Square Enclosure Latch Key 6.3, 8.1 mm

Triangle Enclosure Latch Key

Double-bit Enclosure Latch Key

05347108055

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-4



http://www.automationdirect.com/pn/TW-SD-VDE-7






Chisel ScrewdriversChisel screwdrivers are the tools for the job when regular screwdrivers are not quite enough. The hexagonal blade goes through the handle to an impact cap with integral 1/4 inch square socket. This model is suitable for fastening, chiseling, and loosening seized screws.

Chisel Screwdrivers


05018283055 Wera chisel screwdriver set. 6 pieces. Wall mount rack included. Manufacturer part number 018283. $49.50

05017040055 Wera Phillips chisel screwdriver, #1 x 90mm (3.54 inch) long blade. Manufacturer part number 017040. $11.00

05017041055 Wera Phillips chisel screwdriver, #2 x 113mm (4.45 inch) long blade. Manufacturer part number 017041. $15.25

05018300055Wera flat (slotted) chisel screwdriver, 0.8 mm (0.03 inch) thick x 4.5 mm (0.18 inch) wide x 100mm (3.94 inch) long blade. Manufacturer part number 018300,

$9.75

05018301055Wera flat (slotted) chisel screwdriver, 1.0 mm (0.04 inch) thick x 5.5 mm (0.22 inch) wide x 103mm (4.06 inch) long blade. Manufacturer part number 018301.

$13.00

05018302055Wera flat (slotted) chisel screwdriver, 1.2 mm (0.05 inch) thick x 7mm (0.28 inch) wide x 100mm (3.94 inch) long blade. Manufacturer part number 018302.

$15.75

050170400550501830005505018283055

LIMITEDLIFETIME

Screwdrivers ANTIROLL-OFF

EXTRADURABLE

HEXAGONBOLSTER

POUND-THRUBLADE

KRAFTFORMERGONOMICS

IMPACT CAP


Phillips PH1, PH2

Slotted 3.5, 4.5, 5.5, 7.0 mm

Pound through blade

A hexagonal blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splin-

tering or breaking.

Hexagon bolster

Greater torque can be transferred by fitting an open-jaw or ring spanner

over the integrated hex bolster.

Impact cap with integrated square socket

An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. And the 1/4-inch square socket allows the connection

of a T-handle or a ratchet for applying higher torque.














Miniature ScrewdriversThe hand support on the easy-turning cap and the fast-turning zone below the cap accelerate the screw driving process. This makes time-consuming grip adjustments, which are required with conventional precision screwdrivers, unnecessary.

Miniature Screwdrivers


TW-SD-SET-3 Wera miniature screwdriver set. 6 pieces. Wall mount rack included. Manufacturer part number 118150. $24.50

TW-SD-MSL-1Wera miniature flat (slotted) screwdriver, 0.4 mm (0.016 inch) thick x 2mm (0.08 inch) wide x 60mm (2.36 inch) long blade. Manufacturer part number 118006.

$3.00

TW-SD-MSL-2Wera miniature flat (slotted) screwdriver, 0.4mm (0.016 inch) thick x 2.5 mm (0.10 inch) wide x 80mm (3.15 inch) long blade. Manufacturer part number 118008.

$3.00

TW-SD-MSL-3Wera miniature flat (slotted) screwdriver, 0.5 mm (0.02 inch) thick x 3 mm (0.12 inch) wide x 80mm (3.15 inch) long blade. Manufacturer part number 118010.

$3.25

TW-SD-MPH-1 Wera miniature Phillips screwdriver, #0 x 60mm (2.36 inch) long blade. Manufacturer part number 118022 $3.25

TW-SD-MSL-1

TW-SD-MPH-1

TW-SD-SET-3

ScrewdriversLIMITED

LIFETIME

ANTIROLL-OFF

EXTRADURABLE

FAST SPINNINGZONE POWER

ZONE

PRECISIONZONE

TW-SD-SET-3 Contents

Phillips PH00, PH0

Slotted 1.8, 2.0, 2.5, 3.0 mm

Free spin cap and spinning zone

The fast-turning zone just below the rotating cap allows rapid twisting.

Power zone

The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tight-ening screws without losing contact

with the screw.

Precision zone

The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine

adjustment work.

FREE SPINCAP

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-6




http://www.automationdirect.com/pn/TW-SD-MSL-1



http://www.automationdirect.com/pn/TW-SD-MPH-1


http://www.automationdirect.com/pn/TW-SD-MPH-1



Kraftform Micro ESD Driver Bit SetWhen doing screwdriving jobs on elec-tronic components (like e.g., smart-phones and tablet PCs), there should be no electrostatic discharge as this could cause malfunctions and a complete failure.

Therefore, tools that are secure against electrostatic discharge are indispens-able.

The electric surface resistance of the Wera ESD material is ≤109 ohm. This securely protects components against electrostatic energy and associated damage.

Micro ESD Driver Bit Set


05073671055Wera Kraftform Kompact series driver bit set with Micro ESD bitholding screwdriver, 4mm Halfmoon/HIOS drive, metric. 20 pieces. Durable cloth pouch included. Manufacturer part number 073671.

$186.00

Note: Screwdriver bits are warranted against manufacturer defect only.

Micro ESD Driver Bit Set


Kraftform Micro ESD bitholding screwdriver

Slotted bit, 44mm long

0.23 x 1.5, 0.40 x 2.0, 0.50 x 3.0

Phillips bit, 44mm long PH00, PH0, PH1

Hex-Plus bit, 44mm long 1.5, 2.0

Torx ® bit, 44mm long

TX1, TX2, TX3, TX4, TX5, TX6

Torx Plus bits TX1, TX2, TX3, TX4

Five Lobe bit #1

ANTIROLL-OFF

HALFMOON &HIOS DRIVE

HEX-PLUS

FREE SPINCAP

FAST SPINNINGZONE

POWERZONE

PRECISIONZONE

TEXTILEPOUCH

Note: Fractional dimensions are in inches. Whole and decimal dimensions are in millimeters.

LIMITEDLIFETIME

05073671055

ESD safe screwdrivers

The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 613405-1. This standard also includes a handle that has to be out of a defined conduc-tive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some tech-nology companies.

ESDTOOL







L-KeysHex-Plus L-keys for hexagon socket screws provide more contact surface inside the screw, which prevents rounding.

L-keys can transfer high torque but they must not twist to any great extent, or shear off, to minimize the risk of inju-ries. Wera’s extensive experience with narrow tolerance manufacturing tech-niques, careful material selection and refined hardening technologies delivers maximum safety at work.

L-Keys for Hexagon Socket Screws


TW-HK-SET-MM Wera hex key set, nine-piece, includes metric sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm. Holder included. Manufacturer part number 022086. $11.00

TW-HK-SET-STDWera hex key set, 13-piece, includes inch sizes 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Holder included. Manufacturer part number 022171.

$19.50

05022089055Wera hex key set, nine-piece, multicolor, L-key hexdriver set. Includes metric sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm. Two-component clip included. Manufacturer part number 022089.

$41.00

05022639055Wera hex key set, nine-piece, multicolor, L-key hexdriver set. Includes impe-rial sizes 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8 inch. Includes durable cloth pouch. Manufacturer part number 022639.

$41.00

Note: L-keys are warranted against manufacturer defect only.

TW-HK-SET-MM TW-HK-SET-STD

Screwdrivers for Hexagon Socket Screws

T-Handle Hex Drivers


05344547001 Wera T-handle hexdriver set, 8 pieces. Includes metric sizes 2, 2.5, 3, 4, 5, 6, 8, and 10 mm. Manufacturer part number 344547. $43.50

05344548001Wera T-handle hexdriver set, 10 pieces. Includes imperial sizes 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8 inch. Manufacturer part number 344548.

$57.00

T-Handle Hex DriversThe T-handle is useful whenever higher tightening or loosening torque needs to be applied. The exclusive use of hard material in combination with the large contact surface area in the hand ensures an efficient, positive transfer of power.

HEX-PLUS

HEX-PLUS

LIMITEDLIFETIME

05022089055 05022639055

0534454700105344548001

Hexagon ball tipThe spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, “around-the-corner” screwdriving jobs.

BALLEND

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-8



http://www.automationdirect.com/pn/TW-HK-SET-STD

http://www.automationdirect.com/pn/TW-HK-SET-STD

http://www.automationdirect.com/pn/TW-HK-SET-MM

http://www.automationdirect.com/pn/TW-HK-SET-MM









Bit Drivers and Bits

BiTorsion

BiTorsion bits are absolutely premium products. They have a softer BiTorsion zone which reduces the hardness of the shaft by about 20% in comparison to the drive tip. This means that the peak loads that cause bit breakage and premature wear are absorbed in this zone – something which enhances the service life of the bits.

Diamond coated bits

Today, the Wera diamond bit – manufactured with the technology specifically developed by Wera – still sets the standard in terms of resil-ience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head.

Rapidaptor Technology

Wera developed the Rapidaptor that allows rapid bit change without any extra tools with only one hand.

Impact Proof

Impaktor bits are needed when a strong power tool is used. Impact bits were specifically developed to with-stand high power tool forces.

Single hand quick release.

Rapid-out

Simply push the sleeve forward to change the bit.

RAPIDAPTORTECHNOLOGY

DIAMOND

IMPACTPROOF




TW-DB-SET-SD1 ContentsKraftform Kompact bit-holding bayonet screw-driver

1/4 Rapidadaptor bit holder 1/4 x 50

Slotted bit, 25mm long

0.6 x 4.5, 1.0 x 5.5, 1.2 x 6.5


Screwdriver Bit SetsWera bits have been designed for demanding applications in trade and industry. They are able to transfer high torque loads, are safe to use and extremely durable.

Driver Bit Adapter


TW-DB-ADT-MAG Wera Rapidaptor driver bit adapter, 1/4 inch drive, overall length 2-1/4 inch, ring magnet. Manufacturer part number: 052490. $15.50

Note: Bit-holders are warranted against manufacturer defect only.

TW-DB-SET-SD1

TW-DB-ADT-MAG

Screwdriver Bit SetsLIMITED

LIFETIME

Screwdriver Bit Sets


TW-DB-SET-SD1 Wera Kraftform Kompact driver bit set with screwdriver, 1/4 inch drive. 8 pieces. Durable cloth pouch included. Manufacturer part number 051024. $36.50

TW-DB-SET-6A Wera Bit-Check driver bit set, 1/4 inch drive. 7 pieces. Plastic case included. Manufacturer part number 135956. Limited

Note: Screwdriver bits and bit-holders are warranted against manufacturer defect only.

TW-DB-SET-6A


RING-MAGNET


TEXTILEPOUCH

TW-DB-SET-6A Contents

1/4 Rapidaptor bit holder

Slotted bit, 25mm long 1.0 x 5.5, 1.2 x 6.5

Phillips bit, 25mm long (2) PH1, (2) PH2

Note: Fractional dimensions are in inches. Whole and decimal dimensions are in mil-limeters.


DIAMOND

Telescopic blade

When the unique telescopic blade is lowered into the handle, fast, easy screw-driving action is possible, even in the tightest spots! By pushing the clamping sleeve, the telescopic blade can be extended out of the handle and the compact tool becomes a full-sized screwdriver. If the clamping sleeve is pushed again the tele-scopic blade can be taken out of the handle, and be used as a machine bit adaptor.

TELESCOPEBLADE

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-10



http://www.automationdirect.com/pn/TW-DB-SET-SD1

http://www.automationdirect.com/pn/TW-DB-ADT-MAG


http://www.automationdirect.com/pn/TW-DB-ADT-MAG


http://www.automationdirect.com/pn/TW-DB-SET-6A



Bits, Bitholding Screwdriver and L-Keys in One Tool Set This 52-piece set packs maximum screwdriving utility into a compact, light-weight set protected by an extremely robust folding textile box:

• BiTorsion bits for long service life

• Impaktor bits for extreme condi-tions

• Chrome-plated Hex-Plus L-keys with ball-end hex on long arm

• One Rapidaptor bit holder for quick, one-handed bit changes

• One Kraftform Kompact bitholding screwdriver for that ergonomic Kraftform feel

Impact Driver Set


05057460055Wera Kraftform Kompact series driver set with screwdriver, 1/4inch hex socket drive, metric. 52 pieces. Includes Kraftform Kompact bitholding screwdriver and durable cloth pouch. Manufacturer part number: 057460.

$110.00

Note: Screwdriver bits, bit-holders and L-keys are warranted against manufacturer defect only.

Driver Bit Sets


1/4 Kraftform Kompact bitholding screwdriver

1/4 Rapidator holder 1/4 x 50

BiTorsion Phillips, 25mm long (2) PH1, (4) PH2, (2) PH3

Impaktor Phillips bit, 50mm long (2) PH2, PH3

BiTorsion Pozidriv® bits, 25mm long

(2) PZ1, (4) PZ2, (2) PZ3

Impaktor Pozidriv® bits, 50mm long (2) PZ2, PZ3

BiTorsion Torx® bits

(2) TX10, (2) TX15, (3) TX20, (2) TX25, (2) TX30, TX40

Impaktor Torx® bits, 50mm long TX25, TX30, TX40

BiTorsion® slotted bit, 25mm long 0.8 x 5.5, 1.0 x 5.5

Impaktor Hex-Plus bit, 50mm long 4.0, 5.0, 6.0

Hex Plus L-key1.5 x 50, 2.0 x 56, 2.5 x 63, 3.0 x 71, 4.0 x 80, 5.0 x 90, 6.0 x 100, 8.0 x 112

ANTIROLL-OFF

BALLEND

HEX-PLUSIMPACTPROOF


LIMITEDLIFETIME

Note: Fractional dimensions are in inches. Whole and decimal dimensions are in mil-limeters.

05057460055

KRAFTFORMERGONOMICS







Screwdriver BitsScrewdriver BitsWera bits have been designed for demanding applications in trade and industry. They are able to transfer high torque loads, are safe to use and extremely durable.

Screwdriver Bits

Part Number Description Pcs/Pkg

Price Each

TW-DB-PH-1 Wera driver bit, Phillips #1 x 70mm (2.75 inch) long, 1/4 inch hex drive, 10 bits per pack. Manufacturer part number 059755. 10 $11.50

TW-DB-PH-2 Wera driver bit, Phillips #2 x 70mm (2.75 inch) long, 1/4 inch hex drive, 10 bits per pack. Manufacturer part number 059770. 10 $10.50

TW-DB-SL-1Wera driver bit, flat (slotted), 0.5mm (0.02 inch) thick x 3mm (0.12 inch) wide x 50mm (1.97 inch) long, 1/4 inch hex drive, 10 bits per pack. Manufacturer part number 059305.

10 $27.00


TW-DB-SL-1 TW-DB-PH-1

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-12



http://www.automationdirect.com/pn/TW-DB-PH-1


http://www.automationdirect.com/pn/TW-DB-SL-1

http://www.automationdirect.com/pn/TW-DB-SL-1


Torque Screwdrivers

LIMITEDLIFETIME

Torque ScrewdriversWera torque tools permit torque-controlled tightening to prevent damage to screws or work pieces and to guar-antee the safety of screw connection. This makes labor-intensive drilling, re-tapping and production downtimes a thing of the past.

All Wera torque tools are supplied with a calibration certificate.

Torque Screwdrivers


TW-TD-2-11Wera Kraftform 7400 series adjustable torque screwdriver, 2.5-11.5 in·lb set point, numerical torque value, 1/4in hex socket drive. Driver bits not included. Manufacturer part number 074710.

$77.00

TW-TD-11-29Wera Kraftform 7400 series adjustable torque screwdriver, 11-29 in·lb set point, numerical torque value, 1/4in hex socket drive. Driver bits not included. Manufacturer part number 074711.

$77.00

05074712055Wera Kraftform 7400 series adjustable torque screwdriver, 25-55 in·lb set point, numerical torque value, 1/4in hex socket drive. Driver bits not included. Manufacturer part number 074712.

$119.00

05350451055 Wera Kraftform 7400 series adjustable torque screwdriver set, 1/4in hex socket drive. 27 pieces. Includes sturdy plastic case. Manufacturer part number 350451. $319.00


TW-TD-2-11 TW-TD-11-29

LIMITEDLIFETIME

05074712055

ANTIROLL-OFF

KRAFTFORMERGONOMICS



Torque screwdriver 2.5-11.5 in·lb

Torque screwdriver 11-29 in·lb

25-55 in·lb pistol grip torque screwdriver

Hex-Plus bits, 25mm long 2, 2.5, 3, 4, 5, 6

Torx ® bits, 25mm long

TX6, TX7, TX8, TX9, TX10, TX15, TX20, TX25, TX30

Torx® Plus bits, 25mm long

TX6, TX7, TX8, TX9, TX10, TX15, TX20, TX25, TX30

Note: Fractional dimensions are in inches. Whole and decimal dimensions are in millimeters.05350451055

Adjustable torque screwdriver

Simple setting of the required torque by hand. Easy-to-read scale value.

Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached.

TORQUETOOL




http://www.automationdirect.com/pn/TW-TD-11-29









Impact Driver SetImpact drivers are the solution when-ever manual power is insufficient and a pneumatic screwdriver is not readily available.

This 17-piece set comes in a surface-preserving, compact and robust fabric box. Lightweight and compact for simplified mobility.

Impact Driver Set


05072017055 Wera impact driver set, 5/16in hex socket drive. 17 pieces. Includes durable cloth pouch. Manufacturer part number 072017. $221.00


ScrewdriversLIMITED

LIFETIME

05072017055 ContentsImpact driver 5/16 in hex socket

Phillips bits PH2, PH3, PH4

Slotted bit 12

Hex-Plus bits 5, 6, 7, 8, 10

Torx® bit TX30, TX40, TX45, TX50, TX55

Square socket adapters 3/8, 1/2

With an Impact driver, the most tightly seized screw can be loosened.

Double-curved design

The Wera impact driver has particularly high efficiency thanks to its robust double-curved design. Impact forces are converted into rotary motion, so there is no need to use pneumatic tools.


1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-14





NutdriversWera nutdrivers have the same Kraftform Plus handles as standard screwdrivers. Shafts are made of chrome-plated steel and are hollow to allow access to nuts on long screws. Available in inch and metric sets.

Nutdrivers


05345230055Wera nutdriver set. 7 pieces. Includes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2 inch drivers with hollow shafts for clearing long threads. Manufacturer part number 345230.

$35.00

05029510055Wera nutdriver set. 7 pieces. Includes 5.0, 5.5, 6.0, 7.0, 8.0, 10.0 and 13.0 mm drivers with hollow shafts for clearing long threads. Manufacturer part number 029510.

$35.00

0534523005505029510055

NutdriversLIMITED

LIFETIME

ANTIROLL-OFF

KRAFTFORMERGONOMICS

Hollow shaft

A screwdriver with a hollow shaft is needed whenever there are screw-driving jobs involving threaded rods i.e., the threaded rod through the nut can slip into the hollow shaft of the screwdriver.

HOLLOWSHAFT








Wrenches

Joker - Does it all. Better.

Practical holding function

The Joker’s holding function means that nuts and bolts can be directly and reliably positioned where they are needed. The metal jaw plate holds nuts securely for one hand place-ment reducing the risk of dropping.

HOLDINGFUNCTION

Limit Stop for faster assembly

Joker’s limit stop plate keeps the wrench from slipping off of the bolt head or nut preventing constant repositioning of the wrench.

LIMITSTOP

Safer due to anti-slip effect

The Joker’s clever double-hex geometry delivers a very positive connection with nuts or bolts – it’s a perfect fit. The exchangeable, hardened metal gripping plate in the Joker’s mouth literally bites itself into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque.

ANTI-SLIPFINE

TOOTHSMALLANGLE

30°

Small return angle

Conventional open-end wrenches have a 60° return angle. The Joker works twice as fast having a 30° return angle with a double hex design. This, along with the Joker’s straight head eliminate turning the wrench over. The fine 80 tooth ratchet mechanism in the box-end wrench provides even greater flexibility working in confined spaces.

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-16



WrenchesRatcheting Combination WrenchesJoker combination ratchet wrenches revolutionize the humble wrench. The 12-point open end features a unique 6-point stop plate that enables easier turning of bolts and also provides improved grip for loosening stubborn bolts. The fine tooth ratchet mechanism is exceptional for working in tight spaces. Joker wrenches feature chrome molybdenum steel construction with a nickel-chrome coating for corrosion protection.

Metric Ratcheting Combination Wrenches


Price Each

05073290055Wera Joker ratcheting combination wrench set, metric, 4 pieces, includes 10, 13, 17 and 19mm wrenches. Durable cloth pouch included. Manufacturer part number: 073290.

1 set $92.00

05020013055Wera Joker ratcheting combination wrench set, metric, 11 pieces, includes 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm wrenches. Durable cloth pouch included. Manufacturer part number: 020013.

1 set $243.00

05073268055 Wera Joker ratcheting combination wrench, 8mm, special nut holding fea-ture and fine tooth ratchet. Manufacturer part number: 073268. 1 $18.00

05073270055 Wera Joker ratcheting combination wrench, 10mm, special nut holding feature and fine tooth ratchet. Manufacturer part number: 073270. 1 $18.50






05073276055 Wera Joker ratcheting combination wrench, 16 mm, special nut holding feature and fine tooth ratchet. Manufacturer part number: 073276. 1 $24.00




05073270055

05073279055

05073290055

SAE Ratcheting Combination Wrenches


Price Each

05073295055Wera Joker ratcheting combination wrench set, SAE, 4 pieces, includes 7/16, 1/2, 9/16 and 3/4 in wrenches. Durable cloth pouch included. Manufacturer part number: 073295.

1 set $92.00

05020012055Wera Joker ratcheting combination wrench set, SAE, 8 pieces, includes 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 in wrenches. Durable cloth pouch included. Manufacturer part number: 020012.

1 set $173.00

05073280055 Wera Joker ratcheting combination wrench, 5/16 inch, special nut holding feature and fine tooth ratchet. Manufacturer part number: 073280. 1 $17.00








LIMITEDLIFETIME

05020013055

ANTI-SLIP

LIMITSTOP

HOLDINGFUNCTION

SMALLANGLE

30°

FINETOOTH































Extremely slim Long leverage

Forged, chrome-molybdenum steel ratchet has no torque limitation and is

designed to fit in tight areas.

Small return angle

The fine 72 tooth ratchet mechanism has a low return angle of 5°. This short

stroke allows fast and precise work in small spaces.

Ratchets

Zyklop Metal Ratchet

FINETOOTH

Secure socket lock mechanism

The ball lock holds sockets and attachments securely, ensuring safe

operation. To release the socket simply press the release button.

Switch Lever

Switch lever for convenient change of direction

EXTRASLIM UNLOCK

SWITCH

Wera Metal Ratchets and Ratchet Sets


Price Each

05004004055 Wera Zyklop Metal ratchet, switch lever, 1/4 inch drive, 5 degree return angle, all metal construction, secure socket lock mechanism. 1 $39.50



1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-18







Wera socket set with Zyklop Metal switch lever ratchet, 1/4 inch drive, SAE, 28 pieces. Includes the pieces listed in the table below.

1/4 inch Drive Metal Ratchet Sets


05004021055Wera socket set with Zyklop Metal switch lever ratchet, 1/4 inch drive, SAE. 28 pieces. Durable cloth pouch included. Manufacturer part number: 004021.

$94.00

05004018055Wera socket set with Zyklop Metal switch lever ratchet, 1/4 inch drive, metric. 28 pieces. Durable cloth pouch included. Manufacturer part number: 004018.

$94.00


1/4 inch Drive Imperial and Metric Ratchet Sets

Zyklop Metal Ratchet and Socket Sets

LIMITEDLIFETIME


1/4 Zyklop Metal ratchet

6-point socket, 23mm long

3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2

Extension 1/4 x 150

Wobble Extension 1/4 x 56

Bit adaptor 1/4 x 1/4 x 37

Hex-Plus bit, 25mm long 3, 4, 5, 6


Posidriv® bit, 25mm long PZ1, PZ2


TX10, TX15, TX20, TX25, TX27, TX30


Wera socket set with Zyklop Metal switch lever ratchet, 1/4 inch drive, metric, 28 pieces. Includes the pieces listed in the table below.




5, 5.5, 6, 7, 8, 10, 11, 12, 13

Extension 1/4 x 150







TX10, TX15, TX20, TX25, TX27, TX30

FINETOOTH

EXTRASLIM UNLOCK

SWITCH












05004051055Wera socket set with Zyklop Metal switch lever ratchet, 3/8 inch drive, SAE. 29 pieces. Durable cloth pouch included. Manufacturer part number 004051.

$120.00

05004048055Wera socket set with Zyklop Metal switch lever ratchet, 1/2 inch drive, metric. 28 pieces. Durable cloth pouch included. Manufacturer part number 004078.

$120.00

Note: Screwdriver bits and bit-holders are warranted against manufacturer defect.



LIMITEDLIFETIME



6-point socket

8 x 29, 10 x 29, 12 x 29, 13 x 29, 15 x 29, 16 x 30, 17 x 30, 18 x 30, 19 x 30

Extension 3/8 x 200



Hex-Plus bit, 25mm long 3, 4, 5, 6, 8




TX 15, TX 20, TX 25, TX 27, TX 30, TX 40



6-point socket

1/4 x 29, 5/16 x 29, 3/8 x 29, 7/16 x 29, 1/2 x 29, 9/16 x 29, 5/8 x 30, 11/16 x 30, 3/4 x 30

Extension 3/8 x 200



Hex-plus bit, 25mm long

5/32, 3/16, 7/32, 1/4, 5/16




TX 15, TX 20, TX 25, TX 27, TX 30, TX 40



FINETOOTH

EXTRASLIM UNLOCK

SWITCH

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-20











05004081055Wera socket set with Zyklop Metal switch lever ratchet, 1/2 inch drive, SAE. 28 pieces. Durable cloth pouch included. Manufacturer part number 004081.

$175.00

05004078055Wera socket set with Zyklop Metal switch lever ratchet, 1/2 inch drive, metric. 28 pieces. Durable cloth pouch included. Manufacturer part number 004078.

$175.00




LIMITEDLIFETIME




10, 11, 12, 13, 14, 15, 16, 17, 18, 19

Extension 1/2 x 250




Phillips bit, 32mm long PH 2, PH 3


TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55




3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16

Extension 1/2 x 250



Hex-Plus bit, 30mm long 7/32, 1/4, 5/16, 3/8

Phillips bit, 32mm long PH2, PH3





FINETOOTH

EXTRASLIM UNLOCK

SWITCH








Ratchets

Zyklop Speed Ratchet

Small return angle

The fine 72 tooth ratchet mechanism has a low return angle of 5°. This short

stroke allows fast and precise work in small spaces.

FINETOOTH

Swivel ratchet head

The ratchet head pivots freely and locks at 0°, 15° and 90°, making it possible to work in confined spaces

with ample hand clearance.

FLEXIBLEHEAD

Simple direction change

Rotating the large thumbwheel quickly changes rotation from clockwise to

counterclockwise from any position of the ratchet head.

SWITCH

Unbelievably fast

The gyrating mass design along with the Kraftform handle and free-turning sleeve allow for rapid rotation when

used as a screwdriver.

SPEEDRAPID SPIN

SLEEVE

Wera Speed Ratchets


05003500055 Wera Zyklop Speed ratchet, 1/4 inch drive, with locking swivel head and ergonomic grip handle. Manufacturer part number 003500. $66.00



LIMITEDLIFETIME

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-22






1/4 inch Drive Imperial Ratchet Sets


05003535055Wera driver bit and socket set with Zyklop Speed ratchet, 1/4 inch drive, SAE. 41 pieces. Sturdy metal case included. Manufacturer part number` 003535.

$232.00



1/4 Zyklop Speed ratchet

Sliding T-handle 1/4 x 110


3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16

Wobble extension 1/4 x 56

Universal joint 1/4 x 35.5

Lockable extension 1/4 x 150, 1/4 x 75

Bit adaptor 1/4 x 37

Slotted bit, 25mm long 0.6 x 4.5, 1.0 x 5.5, 1.2 x 8.0

Hex-Plus bit, 25mm long

5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32


Posidriv® bit, 25mm long PZ1, PZ2, PZ3



1/4 inch Drive Imperial Ratchet Sets

Wera driver bit and socket set with Zyklop Speed ratchet, 1/4 inch drive, SAE, 41 pieces. Includes the pieces listed in the table below.


Zyklop Speed Ratchet and Socket Sets

LIMITEDLIFETIME

FINETOOTH SWITCH

FLEXIBLEHEAD

SPEEDRAPID SPIN

SLEEVE






1/4 inch Drive Metric Ratchet Sets


05003533055 Wera driver bit and socket set with Zyklop Speed ratchet, 1/4 inch drive, metric. 42 pieces. Sturdy metal case included. Manufacturer part number 003533. $246.00

05051045055 Wera driver bit and socket set with Zyklop Speed ratchet, 1/4 inch drive, metric, 26 pieces. Durable cloth pouch included. Manufacturer part number 051045. $109.00






4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14


Universal joint 1/4 x 35.5



Slotted bit, 25mm long 0.6 x 4.5, 1.0 x 5.5, 1.2 x 8



Posidriv® bit, 25mm long PZ1, PZ2, PZ3



1/4 inch Drive Metric Ratchet Sets

Wera driver bit and socket set with Zyklop Speed ratchet, 1/4 inch drive, metric, 42 pieces. Includes the pieces listed in the table below.




6-point socket 5.5, 6, 7, 8, 10, 12, 13

Lockable extension 1/4 x 150


Slotted bit 1.0 x 5.5 x 50





TX10, TX15, TX20, TX25, TX30, TX40



Zyklop Speed Ratchet and Socket Sets

LIMITEDLIFETIME

FINETOOTH SWITCH

FLEXIBLEHEAD

SPEEDRAPID SPIN

SLEEVE

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-24










6-point socket

1/4 x 29, 5/16 x 29, 11/32 x 29, 3/8 x 29, 7/16 x 29, 1/2 x 29, 9/16 x 29, 5/8 x 30, 11/16 x 30, 3/4 x 30, 13/16 x 30, 7/8 x 30


Universal joint 3/8 x 50




Hex-Plus bit, 25mm long

5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32


Posidriv bit, 25mm long PZ2, PZ3


TX10, TX15, TX20, TX25, TX27, TX30, TX40

3/8 inch Drive Ratchet Sets


05003596055 Wera driver bit and socket set with Zyklop Speed ratchet, 3/8 inch drive, SAE. 38 pieces. Sturdy metal case included. Manufacturer part number 003596. $279.00





LIMITEDLIFETIMEZyklop Speed

Ratchet and Socket Sets

FINETOOTH SWITCH

FLEXIBLEHEAD

SPEEDRAPID SPIN

SLEEVE




6-point socket

6 x 29, 7 x 29, 8 x 29, 9 x 29, 10 x 29, 11 x 29, 12 x 29, 13 x 29, 14 x 29, 15 x 29, 16 x 30, 17 x 30, 18 x 30, 19 x 30, 20 x 30, 21 x 30, 22 x 30, 24 x 30






Hex-Plus bit, 25mm long 3, 4, 5, 6, 8, 10


Posidriv ® bit, 25mm long PZ2, PZ3

Torx ® bit 25mm long

TX10, TX15, TX20, TX25, TX27, TX30, TX40












05003647055 Wera driver bit and socket set with Zyklop Speed ratchet, 1/2 inch drive, SAE. 38 pieces. Sturdy metal case included. Manufacturer part number 003647. $410.00








6-point socket

3/8 x 37, 7/16 x 37, 1/2 x 37, 9/16 x 37, 19/32 x 37, 5/8 x 37, 11/16 x 37, 3/4 x 37, 25/32 x 37, 13/16 x 37, 7/8 x 37, 15/16 x 37, 31/32 x 37, 1 x 40, 1-1/16 x 40, 1-1/8 x 40, 1-3/16 x 42, 1-1/4 x 42

Wobble exten-sion 1/2 x 52




Hex-Plus bit, 30mm long 7/32, 1/4, 5/16, 3/8

Phillips bit, 35mm long PH3 x 32

Posidriv® bit, 35mm long PZ3 x 32

Torx ® bit, 35mm long TX20, TX25, TX30, TX40, TX45, TX50, TX55

LIMITEDLIFETIMEZyklop Speed

Ratchet and Socket Sets





6-point socket

10 x 37, 11 x 37, 12 x 37, 13 x 37, 14 x 37, 15 x 37, 16 x 37, 17 x 37, 18 x 37, 19 x 37, 20 x 37, 21 x 37, 22 x 37, 24 x 37, 27 x 42, 30 x 42, 32 x 42






Phillips bit, 30mm long PH3 x 32

Posidriv® bit, 30mm long PZ3 x 32

Torx ® bit, 35mm long TX20, TX25, TX30, TX40, TX45, TX50, TX55


FINETOOTH SWITCH

FLEXIBLEHEAD

SPEEDRAPID SPIN

SLEEVE

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-26







Koloss RatchetThe Koloss 1/2 inch drive ratchet is an extra- heavy duty ratchet and hammer combina-tion for tackling big jobs. It comes with a removable extension arm, rubber hammer face pad and durable cloth holster. Ratchets are made of chrome vanadium steel with a brushed chrome-plated finish for corrosion protection.

Wera Koloss Ratchet


05133862055Wera Koloss ratchet set, three-piece, 1/2 inch drive, includes Koloss ratchet with hammer feature and ergonomic grip handle, handle exten-sion with release pin for increased torque and a synthetic rubber hammer face pad. Heavy-duty holster with belt loop included. Manufacturer part number 133862.

$108.00

RatchetsLIMITED

LIFETIME

Wera Zyklop Mini Bit Ratchet


05073230055Wera Zyklop Mini bit ratchet, 1/4 inch drive, 6 degree return angle. Adapter for 1/4-inch sockets included. Manufacturer part number 073230.

$31.00

LIMITEDLIFETIME

Zyklop Mini RatchetThe Wera Zyklop mini bit ratchet is designed for easy, flexible fastening using 1/4” bits and sockets. Its compact design features a small 6° return angle, a thumbwheel for quick operation and a switch lever for convenient direction change. It’s constructed of chrome vanadium steel with a brushed chrome-plated finish for corrosion protection.

FINETOOTH

Small return angle

HAMMERFUNCTION

Hammer Function

PUSH

Push-through direction change

FINETOOTH

Small return angleSwitch Lever

SWITCH

Thumbwheel

SPEED






Zyklop Mini Bit Ratchet Sets


05073220055 Wera Tool-Check driver bit and socket set with Zyklop Mini bit ratchet, 1/4 inch drive, metric. 38 pieces. Plastic case included. Manufacturer part number 073220. $88.00

TW-DB-SET-28R Wera Bit-Check driver bit set with Zyklop Mini bit ratchet, 1/4 inch drive, SAE. 31 pieces. Plastic case included. Manufacturer part number 346293. $66.00

Note: Screwdriver bits are warranted against manufacturer defect.


Zyklop Mini bit ratchet

Rapidaptor bit holder 1/4 x 50

1/4 socket adaptor 1/4 x 25

Slotted 1.0 x 5.5 x 25


Phillips bit, 25mm long (2) PH1, (3) PH2, PH3


TX10, TX15, TX20, TX25, TX30, TX40

Tamper-proof Torx ® bit, 25mm long

TX10, TX15, TX20, TX25, TX30

Posidriv® bit, 25mm long PZ1, (3) PZ2, PZ3

6-point socket 5.5, 6.0, 7.0, 8.0 10.0, 12.0, 13.0

Zyklop Mini Bit Ratchet Sets

LIMITEDLIFETIME

Wera Tool-Check driver bit and socket set with Zyklop Mini bit ratchet, 1/4 inch drive, SAE, 38 pieces. Includes the pieces listed in the table below.

TW-DB-SET-28R

Wera Bit-Check driver bit set with Zyklop Mini bit ratchet, 1/4 inch drive, SAE, 31 pieces. Includes the pieces listed in the table below.

05073220055

FINETOOTH

FULLSTEEL

RAPIDAPTORTECHNOLOGY SPEED

SWITCH

TW-DB-SET-28R Contents

Zyklop Mini bit ratchet

1/4 Rapidaptor bit holder 1/4 x 50

1/4 socket adaptor 1/4 x 25

Phillips bit, 25mm long (2) PH1, (3) PH2, PH3


TX10, TX15, TX20, TX25, TX30, TX40

Tamperproof Torx-® bit, 25mm long

TX10, TX15, TX20, TX25, TX30


Hex-Plus bit, 25mm long 3/32, 1/8, 5/32, 3/16, 1/4

Square bit, 25mm long #1, (3) #2, #3

Note: Fractional dimensions are in inches.Whole and decimal dimensions are in millimeters.

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-28



http://www.automationdirect.com/pn/TW-DB-SET-28R






Socket SetsSocket SetsWera sockets are available in small sets of sockets only or in larger sets that include a Zyklop ratchet and other accessories. Sockets are made from high- quality chrome vanadium steel and have a knurled edge for manual turning. Inch and metric sizes are available in 1/4, 3/8 and 1/2 inch square drive. Sockets are made of chrome vanadium steel with a brushed chrome-plated finish for corrosion protection.

Socket Sets


05300200055Wera metric socket set, six-piece, 1/4 inch drive, includes 6, 8, 10, 12, 13 and 14mm sockets. Storage rail included. Manufacturer part number 300200.

$15.00

05300201055Wera imperial socket set, six-piece, 1/4 inch drive, includes 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2 inch sockets. Storage rail included. Manufacturer part number 300201.

$14.75

05300210055Wera metric socket set, seven-piece, 3/8 inch drive, includes 10, 12, 13, 14, 15, 16 and 17mm sockets. Storage rail included. Manufacturer part number 300210.

$19.50

05300211055Wera imperial socket set, seven-piece, 3/8 inch drive, includes 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 inch sockets. Storage rail included. Manufacturer part number 300211.

$19.75

05300220055Wera metric socket set, seven-piece, 1/2 inch drive, includes 12, 14, 15, 16, 17, 19 and 21mm sockets. Storage rail included. Manufacturer part number 300220.

$27.00

05300221055Wera imperial socket set, seven-piece, 1/2 inch drive, includes 1/2, 9/16, 5/8, 11/16, 3/4, 7/8 and 1 inch sockets. Storage rail included. Manufacturer part number 300221.

$31.50

05300221055

LIMITEDLIFETIME











Torque Wrenches

Torque Wrenches


05075393055 Wera adjustable torque wrench with reversible ratchet. 1.5 to 18 lb·ft, 1/4 inch square drive. Manufacturer part number 075393. $144.00

05075394055 Wera adjustable torque wrench with reversible ratchet 5 to 45 lb·ft, 3/8 inch square drive. Manufacturer part number 075394. $175.00

05075405055 Wera adjustable torque wrench with reversible ratchet. 15 to 80 lb·ft, 3/8 inch square drive. Manufacturer part number 075405. $175.00

05075402055 Wera adjustable torque wrench with reversible ratchet. 30 to 150 lb·ft, 1/2 inch square drive. Manufacturer part number 075402. $184.00

05075393055 05075394055

05075405055 05075402055

LIMITEDLIFETIME

This classic torque wrench is the successful combination of robust design, simple setting of the desired limit value as well as rapid changeover of the ratcheting direction.

When the set value is reached, a distinctly audible and perceptible signal is triggered, after which the wrench is immediately ready for use once again.

All Wera torque tools are supplied with a calibration certificate.

Adjustments are simpleSimple adjustment and locking of the pre-set value on an easy-to-read scale.

Release signalRelease signal when the value is reached.

Choice of hand directionSuitable for right- and left-hand direction.

TORQUETOOL

SWITCH

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-30














Hole Cutting, Threading and Grinding Tools AutomationDirect’s wide line of hole cutting tools makes any job easier and less costly. These tools are designed for use with steel, non-ferrous and light metals, stainless, plastic and cast iron.

These high-quality tools cut quickly and cleanly for a wide variety of applications, including electrical, sanitary engineering, heating technologies, automotive and many more.

Rotary Burrs: High-performance tungsten carbide rotary burrs for duburring, trimming and shaping metals and plastics. Available in a variety of shapes and sizes.

Pneumatic Grinder: A compact, durable, high-speed tool for deburring, grinding, and polishing. Features include a rubberized, non-slip body, an adjustable speed governor, and rear exhaust.

Deburring Tools: A variety of interchangeable HSS blade shapes and sizes with a universal ergonomic handle suitable for a wide range of deburring jobs.

Metal Hole Punches: Easily cut holes in thin sheet metals. Available in four metric sizes and six conduit sizes. Can be used with compact hydraulic punch tool.




Machine Taps: HSS-Co5 machine taps in nine sizes of Unified Coarse (UNC) and Unified Fine (UNF) threads.

Multi-Purpose Hole Saws and Accessories: Bi-metal hole saws up to 8-1/4 inch diameter in HSS and HSS-Co8. Arbor holders and replacement pilot drill bits also available.

Combination Drill Bit/Machine Taps: HSS Combo taps allow you to drill, tap and deburr thru-taps with a single tool.

Jobber Length Drill Bits: High-performance HSS, HSS-Co5, TiN-coated HSS and Black & Gold drill bits

for drilling in all conventional materials. Available in fractional, metric, number

and letter sizes.

Hand Taps: HSS hand taps in fractional, metric, NPT and conduit threads. Wrenches also available.

Step Drill Bits: The ideal tool for sheet-metal working, this durablle and versatile tools will center, spot-drill, bore and debur - all in one smooth, high- performance working cycle. Available in 9 different size ranges in HSS, HSS-Co5 and HSS-TiN.

Countersink Bits: CBN-ground HSS countersink bits suitable for all standard industrial materials. Available in both 82° taper for UNC and UNF fasteners and DIN 33 Type C 90° taper for metric fasteners.

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-32



Self-Starting Step Drill Bits

Frac

tiona

l

Part # High

Speed Steel

Pcs /Pk Price

Part # Titanium Coated

Pcs /Pk Price Part #

Cobalt 5Pcs /Pk Price Drill

Size StepsMin Drill

Size A (in.)

Max Drill Size

B (in.)

Shank Diameter

C (in.)Overall Length D (in.)

101701 1 $17.00 101701T 1 $28.00 101701E 1 $25.50 1 3/16” to 1/2” in 1/16” increments 3/16 1/2 1/4 3-1/8101702 1 $20.00 101702T 1 $31.00 101702E 1 $29.00 2 1/8” to 1/2” in 1/32” increments 1/8 1/2 1/4 2-7/8101703 1 $24.50 101703T 1 $38.50 101703E 1 $35.50 3 1/4” to 3/4” in 1/16” increments 1/4 3/4 3/8 2-7/8101704 1 $33.00 101704T 1 $43.50 101704E 1 $39.50 4 3/16” to 7/8” in 1/16” increments 3/16 7/8 3/8 3-1/4101705 1 $33.50 101705T 1 $46.50 101705E 1 $41.00 5 13/32”, 9/16” to 1” in 1/16” increments 1/4 1 3/8 3-1/16101706 1 $47.00 101706T 1 $73.00 101706E 1 $67.00 6 7/8”, 1-1/8”, 1-7/32”, 1-1/4”, 1-3/8” 1/4 1-3/8 3/8 3101707 1 $19.00 101707T 1 $30.50 101707E 1 $25.50 7 3/8”, 1/2” 3/16 1/2 1/4 1-7/8101708 1 $29.00 101708T 1 $40.50 not available – 8 7/8” 11/64 7/8 3/8 2101709 1 $37.50 101709T 1 $60.00 101709E 1 $55.00 9 7/8”, 1-1/8” 1/4 1-1/8 3/8 2-7/16

Split Point Step DrillsThe spiral flutes of RUKO high-perfor-mance step drills are CBN-ground from the solid hardened form. Because CBN (cubical boron nitride) is a much harder abrasive than even silicon carbide or corundum, a better and sharper cutting edge is achieved without burrs. Because of this higher dimensional precision, the drills will last considerably longer while maintaining precise process tolerances. Drill bits are available in High Speed Steel, Cobalt 5 alloy High Speed Steel and Titanium Nitride-coated High Speed Steel. HSS-Co5 bits are the best choice for cutting stainless steels. The added tita-nium nitride coating increases the surface hardness to approximately 2300 HV and the heat resistance to 1100°F (600°C).

• Point Cut: split point DIN 1412 C• Point angle: 118°• Step angle: 90°• Right-hand cutting

FeaturesWhat makes these step drills special?

• CBN-ground flutes without burrs mean a superior cutting edge and longer tool life.

• Each step has a radially adjusted relief produced by CBN grinding, relating directly to the diameter of the step, so the cutting edge is always the highest point of the diameter.

• Each step is axially CBN relief-ground, meaning the cutting edge is also the highest point of the axial cutting axis.

• The cutting edge of each step has relief angle, meaning the cutting edge is also the highest point in advance direction.

• The CBN-ground point ensures centering and spot-drilling, even in thin-walled material.

ApplicationUse High Speed Steel drills, HSS Cobalt 5 and HSS-TiN coated drills for:

• Sheet metal working in electrical, sanitary engineering, heating technologies, automotive, mechanical engineering, switching systems and aviation

• Non-ferrous metal, steel, stainless steel, thermoplastics, duroplastics, sheet metals up to 0.16” (8 ga.) thick

• Center, spot-drill, bore and debur - all in one operation

CBN-ground flute Axial relief produced by CBN grinding CBN-ground relief angle

Radially adjusted relief produced by CBN grinding

CBN-ground bit with split point DIN 1412C

A B

D

C

Spiral flute step drill bit

101701 shown 101701E shown101701T shown 101702T shown

Tools – Step Drill Bits




http://www.automationdirect.com/pn/101701T

http://www.automationdirect.com/pn/101701E





























Jobber Length Drill Bits - Fractional Sizes

Frac

tiona

l

Part # Black and Gold

HSS-Co5 Pcs/ Pkg Price

Drill Size (Gauge)

(in.)Ø Size (A)

(in.)Flute Length

(B) (in.)

Overall Length (C)

(in.)

For Tapping Use With

228801 10 $16.00 1/16 0.0625 7/8 1-7/8228802 10 $16.50 5/64 0.0781 1 2228803 10 $17.00 3/32 0.0938 1 1/4 2-1/4 228804 10 $18.50 7/64 0.1094 1 1/2 2-5/8228805 10 $19.50 1/8 0.1250 1-5/8 2-3/4

228806 10 $22.00 9/64 0.1406 1-3/4 2-7/8

228807 10 $23.50 5/32 0.1562 2 3-1/8228808 10 $26.50 11/64 0.1719 2-1/8 3-1/4 228809 10 $31.00 3/16 0.1875 2-5/16 3-1/2228810 10 $31.00 13/64 0.2031 2-7/16 3-5/8228811 10 $33.50 7/32 0.2188 2-1/2 3-3/4228812 10 $36.50 15/64 0.2344 2-5/8 3-7/8228813 10 $37.50 1/4 0.2500 2-3/4 4228814 10 $43.00 17/64 0.2656 2-7/8 4-1/8228815 10 $53.00 9/32 0.2813 2-15/16 4-1/4 228816 10 $55.00 19/64 0.2969 3-1/16 4-3/8228817 10 $59.00 5/16 0.3125 3-3/16 4-1/2 265038UNC228818 10 $69.00 21/64 0.3281 3-5/16 4-5/8228819 10 $76.00 11/32 0.3438 3-7/16 4-3/4228820 10 $79.00 23/64 0.3594 3-1/2 4-7/8228821 10 $83.00 3/8 0.3750 3-5/8 5228822 10 $89.00 25/64 0.3906 3-3/4 5-1/8228823 10 $92.00 13/32 0.4062 3-7/8 5-1/4 228824 5 $53.00 27/64 0.4219 3-15/16 5-3/8228825 5 $56.00 7/16 0.4375 4-1/16 5-1/2228826 5 $64.00 29/64 0.4531 4-3/16 5-5/8228827 5 $66.00 15/32 0.4688 4-5/16 5-3/4228828 5 $71.00 31/64 0.4844 4-3/8 5-7/8

228829 5 $76.00 1/2 0.5000 4-1/2 6

Black & Gold DrillsThese high performance twist drills are suitable for all normal drilling in conven-tional materials. High Speed Steel bits with 5% Cobalt alloy (HSS-Co5) and a black oxide surface treatment on the bevel decreases cutting forces and increases wear resistance of the bit.

• Point Cut: from 1/16” dia. with split point DIN 1412 C

• Shank: 5/32 and larger, three-surface shank• Point angle: 135°• Helix angle: 40°• Right hand cutting

FeaturesRUKO black & gold drills 5/32 and larger feature a 3-surface shank that helps align the bit in the chuck and eliminates bit spinning to provide ideal power transmission. A 135° cutting edge precisely aligns the bit and helps prevent drill bit walking. The black oxide surface treatment on the bevel increases wear resistance, preventing cold welding and edge build up and helps reduce current draw on the machine. The 40° helix angle enables fast chip removal and allows a high cutting speed with bit stability.

Application Use black & gold HSS-Co5 drills for:

• Alloyed and unalloyed steel (up to strength of 1200 N/mm2)

• Steel resistant to rust and acid• Cast iron• Aluminum• Aluminum alloys• Copper• Brass and bronze

228807 shown

Jobber length drill bit

Tools – Black & Gold Jobber Length Drill Bits

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-34



http://www.automationdirect.com/pn/265038UNC































Drill Bit Sets

Part # Price Description

228850RO $95.0021-piece jobber length drill set Fractional sizes 1/16 to 3/8 inch in increments of 1/64 inch, Cobalt 5 alloy, golden brown with black oxide bevel finish, 135 degrees point, heavy-duty plastic case included

228851RO $169.0029-piece jobber length drill set Fractional sizes 1/16 to 1/2 inch in increments of 1/64 inch, Cobalt 5 alloy, golden brown with black oxide bevel finish, 135 degrees point, heavy-duty plastic case included

Black & Gold jobber length drill set 228850RO shown

Tools – Black & Gold Jobber Length Drill Bit Sets




http://www.automationdirect.com/pn/228850RO



Jobber Length Drill Bits - Fractional Sizes

Frac

tiona

l

Part # High Speed

Steel Pcs /Pkg Price

Part # Titanium Coated

Pcs/ Pkg Price Part #

Cobalt 5Pcs/ Pkg Price

Drill Size (Gauge)

(in.)Ø Size (A)

(in.)Flute Length

(B) (in.)

Overall Length (C)

(in.)

For Tapping Use With

214801 10 $4.75 250801T 10 $11.00 215801 10 $11.00 1/16 0.0625 7/8 1-7/8214802 10 $4.75 250802T 10 $11.00 215802 10 $11.00 5/64 0.0781 1 2214803 10 $5.00 250803T 10 $11.00 215803 10 $11.00 3/32 0.0938 1 1/4 2-1/4 214804 10 $5.50 250804T 10 $14.50 215804 10 $11.50 7/64 0.1094 1 1/2 2-5/8214805 10 $5.75 250805T 10 $16.50 215805 10 $11.50 1/8 0.1250 1-5/8 2-3/4214806 10 $6.50 250806T 10 $16.50 215806 10 $12.00 9/64 0.1406 1-3/4 2-7/8214807 10 $6.50 250807T 10 $18.00 215807 10 $12.50 5/32 0.1562 2 3-1/8214808 10 $6.75 250808T 10 $22.50 215808 10 $13.50 11/64 0.1719 2-1/8 3-1/4 214809 10 $7.25 250809T 10 $23.00 215809 10 $15.50 3/16 0.1875 2-5/16 3-1/2214810 10 $7.75 250810T 10 $26.50 215810 10 $18.00 13/64 0.2031 2-7/16 3-5/8214811 10 $8.75 250811T 10 $26.50 215811 10 $20.50 7/32 0.2188 2-1/2 3-3/4214812 10 $9.75 250812T 10 $26.50 215812 10 $22.00 15/64 0.2344 2-5/8 3-7/8214813 10 $10.50 250813T 10 $33.00 215813 10 $23.50 1/4 0.2500 2-3/4 4214814 10 $12.00 250814T 10 $34.50 215814 10 $27.00 17/64 0.2656 2-7/8 4-1/8214815 10 $13.00 250815T 10 $40.00 215815 10 $29.00 9/32 0.2813 2-15/16 4-1/4 214816 10 $14.00 250816T 10 $40.00 215816 10 $32.50 19/64 0.2969 3-1/16 4-3/8214817 10 $15.50 250817T 10 $44.50 215817 10 $37.00 5/16 0.3125 3-3/16 4-1/2 265038UNC214818 10 $17.50 250818T 10 $54.00 215818 10 $37.50 21/64 0.3281 3-5/16 4-5/8214819 10 $19.50 250819T 10 $55.00 215819 10 $45.00 11/32 0.3438 3-7/16 4-3/4214820 10 $21.00 250820T 10 $61.00 215820 10 $53.00 23/64 0.3594 3-1/2 4-7/8214821 10 $22.50 250821T 10 $61.00 215821 10 $54.00 3/8 0.3750 3-5/8 5214822 10 $26.00 250822T 10 $65.00 215822 10 $61.00 25/64 0.3906 3-3/4 5-1/8214823 10 $26.50 250823T 10 $71.00 215823 10 $64.00 13/32 0.4062 3-7/8 5-1/4 214824 5 $14.50 250824T 5 $38.00 215824 5 $35.50 27/64 0.4219 3-15/16 5-3/8214825 5 $16.00 250825T 5 $39.50 215825 5 $36.00 7/16 0.4375 4-1/16 5-1/2214826 5 $17.50 250826T 5 $41.50 215826 5 $43.00 29/64 0.4531 4-3/16 5-5/8214827 5 $18.50 250827T 5 $44.00 215827 5 $45.00 15/32 0.4688 4-5/16 5-3/4214828 5 $19.00 250828T 5 $45.00 215828 5 $45.50 31/64 0.4844 4-3/8 5-7/8

214829 5 $20.00 250829T 5 $48.00 215829 5 $46.50 1/2 0.5000 4-1/2 6

Jobber Length DrillsThese high performance twist drills are suitable for all normal drilling in conven-tional materials. Drill bits are available in High Speed Steel (HSS), High Speed Steel with 5% Colbalt alloy (HSS-Co5) and Titanium Nitride-coated High Speed Steel (HSS-TiN).

• Point Cut: 1/8” dia. with split point DIN 1412 C

• Point angle: 118° HSS & HSS-TiN / 135° HSS-Co5

• Helix angle: 20° to 30°• Right hand cutting

FeaturesThe HSS ground twist drill is made of heavy-duty high-speed steel. The fully ground twist drill has a more precise concentricity. HSS-Co5 drills are ideally suited for materials that are especially difficult to drill such as stainlesss steel and for higher chip loading. HSS-TiN models add a titanium nitride coating to increase the surface hardness to approx-imately 2300 HV and the heat resistance to 1100°F (600°C). This also provides longer tool life with increased cutting speeds.

Application Use HSS, HSS-Co5 and HSS-TiN coated drills for:

• Steel and stainless steel• Alloyed and unalloyed cast iron

(up to strength of 13,000 psi)• Grey, malleable, ductile and die-cast iron• Sintered iron, nickel silver, graphite• Short chipping aluminum alloys• Brass and bronze

*118º

C B

A

214816 shown

Jobber length drill bit*Point angle for HSS-Co5 bits is 135°

Tools – Jobber Length Drill Bits

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-36




























































































214816 shown

Jobber Length Drill Bits - Number and Letter Sizes

Num

ber

Part # High Speed

Steel Pcs/Pkg Price Drill Size

(Gauge)Ø Size

A (in. dec.)

Flute Length B

(in.)

Overall Length C

(in.)For Tapping

Use With

2149003 10 $8.75 3 0.2130 2-1/4 3-3/4 265014UNF

2149007 10 $7.75 7 0.2010 2 3-3/8 265014UNC

2149014 10 $7.75 14 0.1820 1-11/16 3-1/8 265120UNF

2149016 10 $7.25 16 0.1770 1-7/8 3-1/8 265120UNC

2149021 10 $6.75 21 0.1590 1-5/8 2-15/16 265100UNF

2149025 10 $6.75 25 0.1495 1-5/8 2-15/16 265100UNC

2149029 10 $6.50 29 0.1360 1-9/16 2-7/8 265080UNC, 265080UNF

2149033 10 $6.00 33 0.1130 1-5/16 2-3/8 265060UNF

2149036 10 $6.00 36 0.1065 1-1/4 2-3/8 265060UNC

2149037 10 $6.00 37 0.1040 1-1/4 2-1/4 265050UNF

2149038 10 $5.50 38 0.1015 1-1/4 2-1/4 265050UNC

2149042 10 $5.25 42 0.0935 1-1/4 2-1/4 265040UNF

2149043 10 $5.00 43 0.0890 1-1/16 2-1/16 265040UNC

Lette

r

214900F 10 $12.00 F 0.2570 2-3/8 4 265516UNC

214900I 10 $13.00 I 0.2720 2-3/4 4-1/4 265516UNF

214900Q 10 $19.50 Q 0.3320 3 4-5/8 265038UNF

214900R 10 $26.00 R 0.3390 3-7/16 4-3/4 231018NPT

Jobber Length Drill Bits - Metric Sizes

Met

ric

Part # High Speed

Steel Pcs/Pkg Price Part #

Cobalt 5 Pcs/Pkg PriceDrill Size

A (mm)

Flute Length B

(mm)

Overall Length C

(mm)214010 10 $6.25 215010 10 $12.00 1.0 12.0 34.0

214015 10 $6.25 215015 10 $12.00 1.5 18.0 40.0

214020 10 $6.25 215020 10 $12.50 2.0 24.0 49.0

214025 10 $7.50 215025 10 $13.00 2.5 30.0 57.0

214030 10 $7.75 215030 10 $13.50 3.0 33.0 61.0

214033 10 $8.25 215033 10 $14.00 3.3 36.0 65.0

214035 10 $8.50 215035 10 $15.00 3.5 39.0 70.0

214040 10 $8.50 215040 10 $15.50 4.0 43.0 75.0

214042 10 $9.00 215042 10 $17.50 4.2 43.0 75.0

214045 10 $9.50 215045 10 $19.50 4.5 47.0 80.0

214050 10 $10.50 215050 10 $23.00 5.0 52.0 86.0

214055 10 $12.00 215055 10 $26.00 5.5 57.0 93.0

214060 10 $12.50 215060 10 $28.00 6.0 57.0 93.0

214065 10 $16.00 215065 10 $34.50 6.5 63.0 101.0

214068 10 $16.50 215068 10 $35.50 6.8 69.0 109.0

214070 10 $17.00 215070 10 $36.00 7.0 69.0 109.0





http://www.automationdirect.com/pn/265014UNF

















http://www.automationdirect.com/pn/231018NPT














http://www.automationdirect.com/pn/214900F

http://www.automationdirect.com/pn/214900I

http://www.automationdirect.com/pn/214900Q

http://www.automationdirect.com/pn/214900R


































Drill Bit Sets


101026USRO $66.00

Three-piece Step Drill Bit Set High Speed Steel, bright finish, spiral fluted with split point. Drill size 1: 6 steps from 3/16” to 1/2” with 1/16” increments. Shank size 1/4” Drill size 2: 13 steps from 1/8 to 1/2” with 1/32” increments. Shank size 1/4” Drill size 3: 9 steps from 1/4” to 3/4“ with 1/16” increments. Shank size 3/8”

101026USERO $99.00

Three-piece Step Drill Bit Set HSS-Co5 spiral fluted with split point. Drill size 1: 6 steps from 3/16” to 1/2” with 1/16” increments. Shank size 1/4” Drill size 2: 13 steps from 1/8 to 1/2” with 1/32” increments. Shank size 1/4” Drill size 3: 9 steps from 1/4” to 3/4“ with 1/16” increments. Shank size 3/8”

101026USTRO $103.00

Three-piece Step Drill Bit Set HSS-TiN coated spiral fluted with split point. Drill size 1: 6 steps from 3/16” to 1/2” with 1/16” increments. Shank size 1/4” Drill size 2: 13 steps from 1/8 to 1/2” with 1/32” increments. Shank size 1/4” Drill size 3: 9 steps from 1/4” to 3/4“ with 1/16” increments. Shank size 3/8”

214214RO $50.00 19-piece jobber Length Drill Set Metric sizes 1.0 to 10.0 mm in increments of 0.5 mmHigh-speed steel, 118 degrees point

214215RO $60.00 25-piece jobber Length Drill Set Metric sizes 1.0 to 13.0 mm in increments of 0.5 mmHigh-speed steel, 118 degrees point

215214RO $98.00 19-piece jobber Length Drill Set Metric sizes 1.0 to 10.0 mm in increments of 0.5 mmHigh-speed steel Cobalt 5 alloy, 135 degrees point

215215RO $116.00 25-piece jobber Length Drill Set Metric sizes 1.0 to 13.0 mm in increments of 0.5 mmHigh-speed steel Cobalt 5 alloy, 135 degrees point

214850RO $34.00 21-piece jobber Length Drill Set Fractional sizes 1/16” to 3/8” in increments of 1/64”High-speed steel, 118 degrees point

214851RO $54.00 29-piece jobber Length Drill Set Fractional sizes 1/16” to 1/2” in increments of 1/64”High-speed steel, 118 degrees point.

215850RO $61.00 21-piece jobber Length Drill Set Fractional sizes 1/16” to 3/8” in increments of 1/64”High-speed steel Cobalt 5 alloy, 135 degrees point

215851RO $89.00 29-piece jobber Length Drill Set Fractional sizes 1/16” to 1/2” in increments of 1/64”High-speed steel Cobalt 5 alloy, 135 degrees point.

250850TRO $39.50 21-piece jobber Length Drill Set Fractional sizes 1/16” to 3/8” in increments of 1/64”TiN-coated high-speed steel, 118 degrees point

250851TRO $59.00 29-piece jobber Length Drill Set Fractional sizes 1/16” to 1/2” in increments of 1/64”TiN-coated high-speed steel, 118 degrees point

Jobber length drill set 214214RO shown

Jobber Length Drill Bits - Metric Sizes Continued

Met

ric

Part # High Speed

Steel Pcs/Pkg Price Part #

Cobalt 5 Pcs/Pkg PriceDrill Size

A (mm)

Flute Length B

(mm)

Overall Length C

(mm)214075 10 $19.00 215075 10 $41.00 7.5 69.0 109.0

214080 10 $23.00 215080 10 $47.00 8.0 75.0 117.0

214085 10 $25.50 215085 10 $57.00 8.5 75.0 117.0

214090 10 $28.00 215090 10 $67.00 9.0 81.0 125.0

214095 10 $29.50 215095 10 $69.00 9.5 81.0 125.0

214100 10 $35.00 215100 10 $56.00 10.0 87.0 133.0

214102 10 $36.50 215102 10 $80.00 10.2 87.0 133.0

214105 5 $19.00 215105 5 $44.50 10.5 87.0 133.0

214110 5 $21.00 215110 5 $46.00 11.0 94.0 142.0

214115 5 $23.00 215115 5 $55.00 11.5 94.0 142.0

214120 5 $25.00 215120 5 $56.00 12.0 101.0 151.0

214125 5 $26.50 215125 5 $55.00 12.5 101.0 151.0

214130 5 $32.00 215130 5 $63.00 13.0 101.0 151.0


Tools – Drill Bit Sets

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-38



http://www.automationdirect.com/pn/101026USERO

http://www.automationdirect.com/pn/101026USTRO

http://www.automationdirect.com/pn/101026USRO

http://www.automationdirect.com/pn/250850TRO

http://www.automationdirect.com/pn/250851TRO




































Drill and Tap CombinationsMetric and fractional drill and tap combination bits.

• High-speed steel • Relief-ground• 1/4” (6.35 mm) hexagonal shank• Thread deburring• For use with mild steel. 1.5x diameter max

material thickness• Approximate thread percentage - 75%

RUKO High-Speed Steel Fractional Drill and Tap Combos

Unifi

ed C

oars

e or

Fi

ne T

hrea

d

Part Number Pcs/Pkg Price Thread

Size

Overall Length

L1 (in.)

Drill Length S1

(in.)

Tap Length

L2 (in.)

Drill Dia. D1

(in.)

Collar Dia. D2

(in.)

Max Material

Thickness (in.)

US270014UNC 1 $8.25 6-32 2.00 0.20 0.40 0.1065 0.28 0.1598

US270015UNC 1 $8.25 8-32 2.00 0.25 0.40 0.1360 0.28 0.2040

US270016UNC 1 $9.00 10-24 2.25 0.25 0.50 0.1495 0.28 0.2243

US270017UNF 1 $9.00 10-32 2.25 0.30 0.50 0.1590 0.28 0.2385

US270018UNC 1 $12.00 12-24 2.25 0.30 0.50 0.1770 0.28 0.2655

US270019UNC 1 $14.00 1/4-20 2.25 0.35 0.50 0.2010 0.28 0.3015

D 2

L 2

L 1

S1

D1

Quick Change Adapter

Part Number Description Price

US270022 RUKO quick change adapter, for use with US2700 series drill bit / machine tap combinations $3.25

RUKO High-Speed Steel Metric Drill and Tap Combo Set

Coar

se T

hrea

d Part Number Pcs/Pkg Price Description

US270020 7 $29.50RUKO combination drill bit and machine tap set, high-speed steel (HSS), 7-piece set includes: (6) metric size drill bit/taps (M3, M4, M5, M6, M8, M10), (1) quick change adapter. Includes heavy-duty plastic case.

RUKO High-Speed Steel Fractional Drill and Tap Combo Set

Unifi

ed C

oars

e or

Fin

e Th

read Part Number Pcs/Pkg Price Description

US270030 7 $29.50

RUKO combination drill bit and machine tap set, high-speed steel (HSS), 7-piece set includes: (6) SAE drill bit/taps (6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC), (1) quick change adapter. Includes heavy-duty plastic case.

RUKO High-Speed Steel Metric Drill and Tap Combos

Coar

se T

hrea

d

Part Number Pcs/Pkg Price Thread

Size

Overall Length

L1 (mm)

Drill Length S1

(mm)

Tap Length

L2 (mm)

Drill Dia. D1

(mm)

Collar Dia. D2

(mm)

Max Material

Thickness (mm)

US270014 1 $8.25 M3x0.5 51.0 5.0 7.0 2.5 7.0 3.75

US270015 1 $8.25 M4x0.7 54.0 6.0 8.5 3.3 7.0 4.95

US270016 1 $9.00 M5x0.8 57.0 7.0 10.0 4.2 7.0 6.30

US270017 1 $9.00 M6X1 60.0 8.0 12.0 5.0 7.0 7.50

US270018 1 $12.00 M8x1.25 68.0 11.0 15.0 6.7 9.5 10.05

US270019 1 $14.00 M10x1.5 75.0 15.0 17.0 8.5 11.5 12.75

US270014 shown

Tools – Drill and Tap Combinations




http://www.automationdirect.com/pn/US270014UNC



http://www.automationdirect.com/pn/US270017UNF



http://www.automationdirect.com/pn/US270022










High-Speed Steel Machine Taps

Unifi

ed C

oars

e Th

read

Part # Pcs/Pkg Price Thread Size Use With

Unifi

ed F

ine

Thre

ad

Part # Pcs/Pkg Price Thread Size Use With

265040UNC 1 $7.50 4-40 2149043 265040UNF 1 $7.50 4-48 2149042

265050UNC 1 $7.50 5-40 2149038 265050UNF 1 $7.50 5-44 2149037

265060UNC 1 $7.50 6-32 2149036 265060UNF 1 $7.50 6-40 2149033

265080UNC 1 $7.50 8-32 2149029 265080UNF 1 $7.50 8-36 2149029

265100UNC 1 $7.50 10-24 2149025 265100UNF 1 $7.50 10-32 2149021

265120UNC 1 $7.50 12-24 2149016 265120UNF 1 $7.50 12-28 2149014

265014UNC 1 $7.50 1/4-20 2149007 265014UNF 1 $7.50 1/4-28 2149003

265516UNC 1 $9.50 5/16-18 214900F 265516UNF 1 $9.50 5/16-24 214900I

265038UNC 1 $10.50 3/8-16 214817, 250817T 265038UNF 1 $10.50 3/8-24 214900Q

Machine TapsChoose from nine sizes in coarse or fine thread machine taps.

• High-speed steel cobalt-alloyed (HSS-Co5)

• Spiral point• Chamfer type B,

4-5 threads with progressive tip• Reinforced shank for through threads

Drill and Tap Selection GuideMachine Screw Size

Tap Drill Size Drill P/N Tap P/N Clearance Hole (in.) Clearance Drill P/N

#4-40 #43 2149043 265040UNC 0.125 214805, 250805T, 215805#4-48 #42 2149042 265040UNF 0.125 214805, 250805T, 215805#5-40 #38 2149038 265050UNC 0.136 2149029#5-44 #37 2149037 265050UNF 0.136 2149029#6-32 #36 2149036 265060UNC 0.149 2149025#6-40 #33 2149033 265060UNF 0.149 2149025#8-32 #29 2149029 265080UNC 0.187 214809, 250809T, 215809#8-36 #29 2149029 265080UNF 0.187 214809, 250809T, 215809#10-24 #25 2149025 265100UNC 0.219 214811, 250811T, 215811#10-32 #21 2149021 265100UNF 0.219 214811, 250811T, 215811#12-24 #16 2149016 265120UNC 0.234 214812, 250812T, 215812#12-28 #14 2149014 265120UNF 0.234 214812, 250812T, 2158121/4-20 #7 2149007 265014UNC 0.281 214815, 250815T, 2158151/4-28 #3 2149003 265014UNF 0.281 214815, 250815T, 2158155/16-18 LTR F 214900F 265516UNC 0.344 214819, 250819T, 2158195/16-24 LTR I 214900I 265516UNF 0.344 214819, 250819T, 2158193/8-16 5/16 214817, 250817T 265038UNC 0.406 214823, 250823T, 2158233/8-24 LTR Q 214900Q 265038UNF 0.406 214823, 250823T, 215823

265050UNC shown

Tools – Machine Taps

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-40




























































































































Fractional and Metric Thread Hand TapsHigh-speed steel fractional and metric size hand taps.

NPT Thread Hand TapsHigh-speed steel National Pipe Taper hand taps.

High-Speed Steel NPT Hand Taps

Part # Pcs/Pkg Price Thread Size Overall Length (in.) Use With

231116NPT 1 $14.00 1/16-27 NPT 2.56 214813, 250813T, 215813

231018NPT 1 $12.50 1/8-27 NPT 2.56 214900R

231014NPT 1 $13.50 1/4-18 NPT 2.76 214825, 250825T, 215825

231038NPT 1 $19.00 3/8-18 NPT 2.95 37/64”

231012NPT 1 $23.50 1/2-14 NPT 3.15 23/32”

Conduit Thread Hand Taps High-speed steel DIN 40430 conduit thread hand taps.

High-Speed Steel Conduit Thread Hand Taps

Part # Pcs/Pkg Price Thread Size Overall Length (mm) Use With

264009 1 $18.00 PG-9 70.0 14.0 mm

264011 1 $26.00 PG-11 80.0 17.25 mm

264016 1 $30.00 PG-16 80.0 21.25 mm

264021 1 $55.00 PG-21 90.0 26.75 mm

264029 1 $75.00 PG-29 100.0 35.5 mm

231100 shown

231038NPT shown

High-Speed Steel Metric Hand Taps

Coar

se T

hrea

d

Part # Pcs/Pkg Price Thread

SizeOverall

Length (mm) Use With

Fine

Thr

ead

Part # Pcs/Pkg Price Thread

SizeOverall

Length (mm) Use With

231030 1 $3.75 M3x0.5 40.0 214025, 215025 235041-2 1 $7.25 M4x0.5 45.0 214035, 215035

231040 1 $3.75 M4x0.7 45.0 214033, 215033 235050-2 1 $7.75 M5x0.5 50.0 214045, 215045

231050 1 $3.75 M5x0.8 50.0 214042, 215042 235081-2 1 $9.25 M8x1 56.0 214070, 215070

231060 1 $4.00 M6X1 50.0 214050, 215050 235122-2 1 $10.00 M12x1 70.0 214110, 215110

231080 1 $4.25 M8x1.25 56.0 214068, 215068 235181-2 1 $19.00 M18x1 80.0 17.0 mm

231100 1 $6.25 M10x1.5 70.0 214085, 215085 235301-2 1 $39.00 M30x1.5 90.0 28.5 mm

231120 1 $7.50 M12x1.75 75.0 214102, 215102

High-Speed Steel Fractional Size Hand Taps

Coar

se T

hrea

d Part # Pcs/Pkg Price Thread

SizeOverall

Length (in.) Use With

Fine

Thr

ead Part # Pcs/

Pkg Price Thread Size

Overall Length (in.) Use With

246080UNC3 1 $8.75 8-32 UNC 1.77 2149029 246100UNF2 1 $8.75 10-32 UNF 1.77 2149021

246100UNC3 1 $8.75 10-24 UNC 1.97 2149025 246014UNF2 1 $6.00 1/4-28 UNF 1.97 2149003

246014UNC3 1 $4.75 1/4-20 UNC 1.97 2149007 246516UNF2 1 $6.50 5/16-24 UNF 2.20 214900I

246516UNC3 1 $5.25 5/16-18 UNC 2.20 214900F

Tools – Hand Taps




http://www.automationdirect.com/pn/246080UNC3

http://www.automationdirect.com/pn/246100UNF2












http://www.automationdirect.com/pn/235041-2







http://www.automationdirect.com/pn/214900R
















































Drill and Hand Tap Sets


245004RO $64.00RUKO hand tap set, high-speed steel (HSS), 15-piece set includes: (7) metric size taps (M3, M4, M5, M6, M8, M10, M12), (7) jobber length drill bits (one for each tap), (1) tap wrench with two-jaw chuck. Includes heavy-duty plastic case.

245004USRO $74.00

RUKO hand tap set, high-speed steel (HSS), 15-piece set includes: (7) SAE taps (8-32 UNC, 10-24 UNC, 10-32 UNF, 1/4-20 UNC, 1/4-28 UNF, 5/16-18 UNC, 5/16-24 UNF), (7) jobber length drill bits (one for each tap), (1) tap wrench with two-jaw chuck. Includes heavy-duty plastic case.

231004USRO $139.00RUKO hand tap set, high-speed steel (HSS), 15-piece set includes: (3) 1/8 x 27 NPT taps, (4) 1/4 x 18 NPT taps, (7) jobber length drill bits (one for each tap), (1) tap wrench with two-jaw chuck. Includes heavy-duty plastic case.

245004R0 shown

Tools – Hand Taps

Hand Tap Wrenches

Hand Tap Wrenches

Part # Pcs/Pkg Price Description Construction Material Use With

241010 1 $22.50 Sliding T-handle ratcheting tap wrench Chrome plated steel M3 to M10, 1/8” to 3/8” taps

241020 1 $25.50 Sliding T-handle ratcheting tap wrench Chrome plated steel M5 to M12, 7/32” to 1/2” taps

241103 1 $13.00 Two-jaw chuck tap wrench Die cast zinc housing, steel handles, hardened chuck jaws M5 to M20, 1/4” to 3/4” taps

241112 1 $6.75 Two-jaw chuck tap wrench Die cast zinc housing, steel handles, hardened chuck jaws M1 to M12, 1/8” to 1/2” taps

241010 shown241103 shown

Tools – Hand Tap Wrenches

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-42












RUKO countersinks are CBN ground from fully hardened, High-Speed Steel (HSS) blanks. Since CBN (cubic crystalline boron nitride) is a much harder abrasive than either silicon carbide or corumdum, CBN grinding of the fully hardened material creates a sharper and more durable cutting edge with precise tolerances.

Radially-adjusted relief grinding ensures that the cutting edge is always the highest point. Combined with the axial relief grinding, this guarantees a smooth, low-heat, chatter-free cut up to 30% faster than competing countersink bits.

This tough tool is suitable for all standard industrial materials: steel, cast iron, stainless steel, non-ferrous metal, thermoplas-tics, and duroplastics. Best results are achieved at low cutting speeds. Use of cutting oil or paste will provide longer tool life and superior quality work.

Available in both 82˚ taper for UNC and UNF fasteners and DIN 335 Type C 90˚ taper for metric fasteners.

RUKO Countersink Bits - Metric with 3-Flat Shank - 90˚ Taper

Part # Price Countersink Diameter (d1)

Nose Diameter (d3)

Total Length (L)

Shank Diameter (d2)

102714 $12.50 10.4 mm [0.41 in] 2.5 mm [0.10 in] 50.0 mm [1.97 in] 6.0 mm [0.24 in]





102153 $106.00 5-piece, 90˚ Countersink set - Includes: 102714, 102716, 102719, 102721, 102723

102719 shown

102153 shown

Tools – Countersink Bits

RUKO Countersink Bits - Inch with Round Shank - 82˚ Taper

Part # Price Countersink Diameter (d1)

Nose Diameter (d3)

Total Length (L)

Shank Diameter (d2)

102182 $10.00 1/4 in [6.4 mm] 3/64 in [1.2 mm] 1.77 in [45 mm] 0.2 in [5 mm]


102184 $13.00 3/8 in [9.5 mm] 5/64 in [2 mm] 1.97 in [50 mm] 0.24 in [6 mm]





102191 $22.00 1 in [25.4 mm] 9/64 in [4.3 mm] 2.99 in [76 mm] 0.39 in [10 mm]

102193RO $85.00 5-piece, 82˚ Countersink set - Includes: 102182, 102184, 102186, 102189, 102191






























Knockout PunchesRUKO’s knockout punch hole-cutting tool includes punch, die and draw bolt (without ball bearing). Use for sheet steel, stainless-steel sheets, non-ferrous and light metals, and plastics. Replacement bolts are offered in three of the most popular sizes.

Features• Cuts holes in thin materials quickly,

easily, cleanly and without burrs. • 3-point cut ensures less deformation of

the punched parts, preventing damage to the draw-in bolt.

• The optional ball bearing between draw-in bolt and die plate makes handling simpler and quicker, reducing the force required by approx. 67% (replacement bolt part numbers, 103110K, 103112K, and 103116K).

• The metric draw-in bolts are of the highest quality and are designed for extreme loads. If lost, they can be replaced for short periods of time by standard metric fine threaded bolts.

Knockout Punches

Part # Pcs/Pkg Price Description Actual Hole Size (Ø A)

Draw Bolt Size (Ø B)

Trade Hole Size Works With

109220 1 $24.00

Knockout punchhole-cutting tool

22 mm M10 22 mm 101703, 103110K109225 1 $24.00 22.5 mm M10 22.5 mm 101703, 103110K109300 1 $31.00 30 mm M12 30 mm 101703, 103112K109305 1 $31.00 30.5 mm M12 30.5 mm 101703, 103112K

1097012 1 $24.00 0.875 inch M10 1/2 inch101703, 103110KRA-16G, RA-16K,

CUR-16G, CUR-16K

1097034 1 $26.50 1.115 inch M12 3/4 inch101703, 103112KRA-20G, RA-20K,

CUR-20G, CUR-20K

1097010 1 $32.00 1.362 inch M12 1 inch101703, 103112K,RA-25G, RA-25K,

CUR-25G, CUR-25K

1097114 1 $38.00 1.6875 inch M16 1-1/4 inch101703, 103116K, RA-32G, RA-32K,

CUR-32G, CUR-32K1097112 1 $46.00 1.9375 inch M16 1-1/2 inch 101703, 103116K

1097020 1 $49.00 2.375 inch M16 2 inch 101703, 103116K

Replacement Draw Bolts

103110K 1 $18.50 M10 replacement bolt with ball-bearing bushing 22 mm, 22.5 mm1/2 inch 109220, 109225, 1097012

103112K 1 $20.00 M12 replacement bolt with ball-bearing bushing 30 mm, 30.5 mm3/4 to 1 inch

109300, 109305, 1097034 1097010

103116K 1 $23.00 M16 replacement bolt with ball-bearing bushing 1-1/4 to 2 inch 1097114, 1097112,1097020

Hole Punch Recommendations

Draw-In Bolt Sheet Steel Pilot Hole Ø Stainless Steel Sheets Non-Ferrous/Light Metals Plastics

M8 x 1.0 mm 14 Ga, 2 mm 7/16” 18 Ga, 1 mm 8 Ga, 4 mm 8 Ga, 4 mm




ØA

BØ

109220 shown

Note: Part number 109225 is recommended when punching holes for 22mm pilot devices. Part number 109305 is recommended when punching holes for 30mm pilot devices.

Ball bearing only available with replacement draw bolts P/N 103110K, 103112K and

103116K

Tools – Punches

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-44



http://www.automationdirect.com/pn/103110K









http://www.automationdirect.com/pn/CUR-16G

http://www.automationdirect.com/pn/CUR-16K





































http://www.automationdirect.com/pn/RA-16G

http://www.automationdirect.com/pn/RA-16K



















Tools – PunchesHydraulic Knockout Punch KitRUKO’s squeeze activated hydraulic knockout punch kit allows a user to quickly and precisely punch clean holes in sheet metal and plastic up to 5/32 inch thick. For use with RUKO knockout punches, sold separately.

Features• Compact design• Manually actuated pistol grip• 50kN (11,000 lbf) of punching force• Use with RUKO knockout punches, sold

separately.

RUKO Hydraulic Knockout Punch Kit


109101 $845.00 RUKO compact hydraulic punch, manual, pistol-grip, 50kN (11,000 lbf). Distance sleeve, adapter bolts and heavy-duty plastic case included.

Spare Parts

109000 $52.00 RUKO distance sleeve, replacement. For use with 109101.

109110 $40.50 RUKO adapter bolt, replacement, MF 10 x 1.0 x 52, 3/4 UNF. For use with punches having MF 10 x 1.0 threads.












Tools – Pneumatic Die GrinderPneumatic Die GrinderThe RUKO pneumatic grinder has a rubberized, non-slip handle that absorbs vibration and protects the users’ hand from slipping while working. Speed is adjusted by a governor on top of the grinder. It has a tool adapter made of hardened steel. The exhaust port directs air backwards through the handle. It features an integrated air filter.

RUKO Pneumatic Die Grinder Specifications

Speed Range 0 - 25,000 RPM

Tool Adapter 1/4 in, collet type

Average Air Consumption 4.00 cfm (113 liters/min)

Air Inlet 1/4 in

Recommended Air Pressure 90 psi (6.2 bar)

Recommended Hose Size 3/8 in

Noise Level 77 dB(A)

Overall Length 7.75 in (196.9 mm)

Weight 1.26 lb (570 g)

RUKO Pneumatic Die Grinder


116100US $61.00 RUKO compact pneumatic grinder, 25,000 rpm, adjustable governor, rear exhaust, rubberized non-slip handle. 116101L coupling plug and (2) collet wrenches included.

RUKO Pneumatic Die Grinder Kits

116112US $241.00 RUKO compact pneumatic grinder set, 14 pieces, includes 116100US compact pneumatic grinder, 116101L coupling plug, 116002US tungsten carbide rotary burr set and (2) collet wrenches.

116113US $124.00 RUKO compact pneumatic grinder set, 7 pieces, includes 116100US compact pneumatic grinder, 116101L coupling plug, 116001US tungsten carbide rotary burr set and (2) collet wrenches.

Spare Parts

116101L $3.50 RUKO coupling plug, pneumatic, European, 1/4 inch nominal hose size, G1/4 male, steel (fits universal couplings)

116119 $3.50 RUKO collet, 1/4 inch, replacement. For use with 116100US.

116112US shown 116119 116101L

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-46



http://www.automationdirect.com/pn/116100US









http://www.automationdirect.com/pn/116101L







Tools – Rotary BurrsRotary BurrsHigh-performance tungsten carbide rotary burrs provide maximum cutting edge stability and high cutting edge tenacity. Double-cut pattern provides a higher cutting capacity compared with single cut burrs, particularly on materials which are difficult to cut.

Application For deburring, trimming, breaking edges, processing weld seams and surface processing on the following materials:

• High-alloy steels• Non-rusting steels• Acid resistant steels• Heat resistant steels• Diecasts• PlasticsDouble cut

pattern

Rotary Burrs

Part # Price Description D1 D2 L1 L2(inch)

116403 $17.00

RUKO rotary burr, cylinder without end cut, tungsten

carbide, double cut

3/8 1/4 2-1/2 3/4

116404 $27.00 1/2 1/4 2-3/4 1

L1L2

D1

D2

116407 $13.50

RUKO rotary burr, cylinder with end cut, tungsten carbide,

double cut

1/4 1/4 2 3/4

116409 $19.00 3/8 1/4 2-1/2 3/4

L1L2

D1

D2

116410 $29.50 1/2 1/4 2-3/4 1

116413 $14.50

RUKO rotary burr, radius, tungsten carbide, double cut

1/4 1/4 2 3/4

116415 $18.50 3/8 1/4 2-1/2 3/4

L1L2

D1

D2

D12

116416 $29.00 1/2 1/4 2-3/4 1

116419 $13.00

RUKO rotary burr, ball, tungsten carbide, double cut

1/4 1/4 2 7/32

116421 $16.00 3/8 1/4 2-1/8 3/8

L2

D1

D2

L1116422 $21.50 1/2 1/4 2-3/16 1/2

116431 $15.00

RUKO rotary burr, tree, tungsten carbide, double cut

1/4 1/4 2 3/4

116433 $18.00 3/8 1/4 2-1/2 3/4

L1L2

D1

D2

116434 $27.00 1/2 1/4 2-3/4 1


















Rotary Burrs (cont’d)

Part # Price Description D1 D2 L1 L2(inch)

116437 $15.00

RUKO rotary burr, pointed tree, tungsten carbide, double cut

1/4 1/4 2 5/8

116439 $20.50 3/8 1/4 2-1/2 3/4

L1L2

D1

D2

116440 $27.50 1/2 1/4 2-3/4 1

116468 $29.00 RUKO rotary burr, pointed cone, tungsten carbide, double cut 1/2 1/4 2-5/8 7/8

L1L2

D1

D2

Tools – Rotary Burrs

Rotary Burr Sets


116001US $48.50 RUKO rotary burr set, 3 pieces, tungsten carbide, includes 116409, 116421 and 116439. Plastic case included.

116002US $172.00 RUKO rotary burr set, 10 pieces, tungsten carbide, includes 116407, 116410, 116413, 116416, 116419, 116422, 116431, 116434, 116437 and 116440. Plastic case included.

116003US $206.00RUKO rotary burr set, 10 pieces, tungsten carbide, includes 116403, 116404, 116415, 116416, 116422, 116433, 116434, 116439, 116440 and 116468. Heavy duty plastic case included.

116003US shown

Rotary Burrs Sets

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-48


































RUKO Hole Saws Selection GuidePart # High Speed Steel

Price Part # High Speed Steel Cobalt 8

Price Diameter (mm) A

Diameter (inch) A

Conduit Size

Pipe Size (inch)

Arbor Holders

106014 $5.00 126014 $6.25 14 9/16 – – A1 / A5

106016 $5.00 126016 $6.50 16 5/8 – – A1 / A5

106017 $5.00 not available – 17 11/16 – – A1 / A5

106019 $5.25 126019 $6.75 19 3/4 – 3/8 A1 / A5

106020 $5.25 not available – 20 25/32 – – A1 / A5

106021 $5.50 not available – 21 13/16 – – A1 / A5

106022 $5.50 126022 $7.00 22 7/8 1/2 1/2 A1 / A5

106024 $5.50 126024 $7.25 24 15/16 – – A1 / A5

106025 $5.75 126025 $7.25 25 1 – – A1 / A5

106027 $5.75 126027 $7.50 27 1-1/16 – – A1 / A5

106029 $6.00 126029 $7.75 29 1-1/8 3/4 3/4 A1 / A5

106030 $6.00 126030 $7.75 30 1-3/16 – – A1 / A5

106032 $6.25 126032 $8.00 32 1-1/4 – – A2 / A6

106033 $6.25 not available – 33 1-5/16 – – A2 / A6

106035 $6.75 126035 $8.75 35 1-3/8 1 1 A2 / A6

106036 $7.00 not available – 36 1-13/32 – – A2 / A6

106037 $7.00 not available – 37 1-7/16 – – A2 / A6

106038 $7.25 126038 $9.00 38 1-1/2 – – A2 / A6

106040 $7.25 not available – 40 1 9/16 – – A2 / A6

106041 $7.50 126041 $9.75 41 1-5/8 – – A2 / A6

106043 $7.75 126043 $9.75 43 1-11/16 – – A2 / A6

106044 $7.75 126044 $10.00 44 1-3/4 1-1/4 1-1/4 A2 / A6

106046 $8.00 126046 $10.00 46 1-13/16 – – A2 / A6

106048 $8.25 126048 $10.50 48 1-7/8 – – A2 / A6

106051 $8.25 126051 $11.00 51 2 1-1/2 1-1/2 A2 / A6

106052 $8.50 not available – 52 2-1/16 – – A2 / A6

106054 $8.75 126054 $11.50 54 2-1/8 – – A2 / A6

106055 $9.00 not available – 55 2-11/64 – – A2 / A6

106057 $9.25 126057 $12.00 57 2-1/4 – – A2 / A6

106059 $9.50 not available – 59 2-5/16 – – A2 / A6

Bi-Metal Hole Saws •

ApplicationsUse High Speed Steel saws with varied cutting teeth for easily cut materials, such as unalloyed steel (up to 101,521 psi strength), non-ferrous and light metals, plastics, plasterboard and light building boards, fiberboard, plywood and wood.

Use High Speed Steel Cobalt 8 saws with fine cutting teeth for cutting metals such as alloyed and non-alloyed steels (up to 145,037 psi strength), high chro-mium alloyed steels, such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.

Features• Cutting edges of HSS or HSS Co 8• Alloyed steel 6135 jacket• Cutting depth up to 1-1/2” (38 mm)• High rotational precision• Sturdy construction• Hole saw and shank in two parts, so

hole saws of different diameters can be exchanged and fitted faster

• Positive chipping and cutting angles ensure more aggressive cutting

• Teeth welded onto steel jacket • HSS hole saws have 5 teeth per inch,

Co 8 hole saws have 6 teeth per inch• Good chip removal• Slots in the jacket side aid in removal

of cutouts• Exchangeable centering drill• Right-hand cutting• Arbors are sold separately

Tools – Hole Saws






















































RUKO Hole Saws Selection Guide, continuedPart # High Speed Steel


Price Diameter (mm) A

Diameter (inch) A

Conduit Size

Pipe Size (inch)

For Arbor Holders

106060 $9.75 126060 $12.50 60 2-3/8 – – A2 / A6

106063 $10.00 not available – 63 2-15/32 – – A2 / A6

106064 $10.00 126064 $13.00 64 2-1/2 2 2 A2 / A6

106065 $10.50 not available – 65 2-9/16 – – A2 / A6

106067 $10.50 126067 $13.50 67 2-5/8 – – A2 / A6

106068 $10.50 not available – 68 2-11/16 – – A2 / A6

106070 $10.50 126070 $14.00 70 2-3/4 – – A2 / A6

106073 $11.00 126073 $14.50 73 2-7/8 – – A2 / A6

106076 $11.50 126076 $15.00 76 3 2-1/2 2-1/2 A2 / A6

106079 $12.50 126079 $16.50 79 3-1/8 – – A2 / A6

106083 $13.50 126083 $17.50 83 3-1/4 – – A2 / A6

106086 $14.00 126086 $18.00 86 3-3/8 – – A2 / A6

106089 $14.50 126089 $18.50 89 3-1/2 – – A2 / A6

106092 $15.00 126092 $19.50 92 3-5/8 3 3 A2 / A6

106095 $16.00 126095 $21.00 95 3-3/4 – – A2 / A6

106098 $17.00 126098 $22.00 98 3-7/8 – – A2 / A6

106102 $18.00 126102 $23.50 102 4 – – A2 / A6

106105 $19.00 not available – 105 4-1/8 3-1/2 3-1/2 A2 / A6

106108 $20.00 126108 $26.00 108 4-1/4 – – A2 / A6

106111 $21.00 126111 $27.50 111 4-3/8 – – A2 / A6

106114 $21.50 126114 $28.00 114 4-1/2 4 4 A2 / A6

106121 $22.50 126121 $29.00 121 4-3/4 – – A2 / A6

106127 $24.00 126127 $31.50 127 5 – – A2 / A6

106133 $27.50 not available – 133 5-1/4 – – A2 / A6

106140 $28.00 126140 $36.00 140 5-1/2 – 5 A2 / A6

106152 $31.50 126152 $41.00 152 6 – – A2 / A6

106160 $35.50 126160 $46.00 160 6-5/16 – – A2 / A6

106168 $39.50 126168 $51.00 168 6-5/8 – – A2 / A6

106177 $43.50 not available – 177 6-31/32 – – A2 / A6

106200 $48.00 126200 $61.00 210 8-1/4 – – A2 / A6

Important Operating Notes• These saws are unsuitable for hammer drill operation• Only slight pressure required to start drilling• Drill with light, steady pressure• Avoid pendulum movements while drilling• Follow table of cutting speeds• Use cooling agents recommended for material• Arbors are sold separately

Note: For pushbuttons, use RUKO knockout punches listed in previous pages.

Dimensions

“A” Outside Diameter

Inside cutting depth 1.5” (38 mm)

Tools – Hole Saws

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-50

























































A

retractable collar

RUKO Arbor Holders with Pilot Drill for HSS Hole SawsPart # High Speed Steel

Price Hole Saws Diameter (inch)

Arbor Holders Type

Shank Diameter (inch) A Shank Shape Thread

106201 $7.00 9/16” - 1-3/16” A1 7/16” Hex 1/2” x 20

106202 $13.00 1-1/4” - 8-1/4” A2 7/16” Hex 5/8” x 18

106209 $12.50 1-1/4” - 8-1/4” A6 3/8” Hex 5/8” x 18

106210 $9.00 9/16” - 1-3/16” A5 3/8” Hex 1/2” x 20

RUKO Pilot Drill for HSS and HSS Co8 Hole SawsPart # High Speed Steel


Price Arbor Holders Type Description

106206 $4.00 126206 $7.50 A1, A2, A5, A6Pilot drill HSS / HSS Co 5, ground, Ø 6.35 mm x 82 mm and split point in accordance with DIN 1412 C

Arbor Holders with Pilot Drill

Pilot Drills

To select the correct arbor size, find the arbors that are compatible with your hole saw diameter.

From those, choose one with a shank size that fits into your drill chuck.

Arbors include HSS pilot bit, ejector spring and 4 mm allen wrench.

A

Part Numbers 106201, 106210Part Numbers 106202, 106209

Pilot drill: 6.35 mm (1/4”) x 82 mm (3-1/4”)Pilot drill: 6.35 mm (1/4”) x 82 mm (3-1/4”)

RUKO Bi-Metal Hole Saw KitsPart # HSS Varied Tooth

Price Part # HSS-Co8 Fine Tooth

Price Type Hole Saw Diameters Included inches (mm)

Arbors Included

Pcs / Pkg

106302 $79.00 126302 $79.00 Electricians 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-11/16 (22.0, 29.0, 35.0, 44.0, 51.0, 68.0) A2, A4 8

106304 $108.00 126304 $119.00 Super7/8, 1, 1-1/4, 1-3/8, 1-5/8, 1-3/4, 2, 2-1/8,

2-3/8, 2-1/2 (22.0, 25.0, 32.0, 35.0, 41.0 44.0, 51.0, 54.0,

60.0, 64.0)A2, A4 12

106318 $207.00 126318* $239.00 Premium5/8, 3/4, 13/16, 15/16, 1, 1-1/8, 1-1/4, 1-7/16,

1-9/16, 1-7/8, 2, 2-1/8, 2-3/8, 2-7/8, 3-1/4 (16.0, 19.0, 21.0, 24.0, 25.0, 29.0, 32.0, 37.0,

40.0, 48.0, 51.0, 54.0, 60.0, 73.0, 83.0)A1, A2 19

106341A $42.00 not available Special 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 (22.0, 29.0, 35.0, 44.0, 51.0, 64.0) A2, A4 8

Bi-Metal hole saw kits include either 6, 10 or 15 High-speed steel or Colbalt 8 hole saws of various sizes in a plastic case.

106304 shown

*Includes 1/4” pilot drill and 11.81 inch long extension

Tools – Hole Saws

Tools – Hole Saw Kits




http://www.automationdirect.com/pn/106341A


















RUKO Hole Saws Recommended Cutting Speeds

MaterialHigh carbon

structural steel up to

101,521 psi

Alloyed steel up to

145,037 psiCast iron over

36,259 psi CuZn alloyAluminium alloy up to

11% SiliconThermo-plastics Duro-plastics Wood

Vc = m/min 30 20 10 35 30 20 15 40Coolant Cutting spray Cutting spray Compressed air Compressed air Cutting spray Water Compressed air Compressed air

Ø inch Ø mm r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m.9/16 14 682 455 227 796 682 455 341 9105/8 16 597 398 199 697 597 398 299 796

11/16 17 562 375 187 656 562 375 281 7493/4 19 503 335 168 587 503 335 251 670

25/32 20 477 318 159 557 477 318 239 63713/16 21 455 303 152 531 455 303 227 6077/8 22 434 290 145 507 434 290 217 579

15/16 24 398 265 133 464 398 265 199 5311 25 382 255 127 446 382 255 191 510

1-1/16 27 354 236 118 413 354 236 177 4721-1/8 29 329 220 110 384 329 220 165 4391-3/16 30 318 212 106 372 318 212 159 4251-1/4 32 299 199 100 348 299 199 149 3981-5/16 33 290 193 97 338 290 193 145 3861-3/8 35 273 182 91 318 273 182 136 364

1-13/32 36 265 177 88 310 265 177 133 3541-7/16 37 258 172 86 301 258 172 129 3441-1/2 38 251 168 84 293 251 168 126 3351-9/16 40 239 159 80 279 239 159 119 3181-5/8 41 233 155 78 272 233 155 117 311

1-11/16 43 222 148 74 259 222 148 111 2961-3/4 44 217 145 72 253 217 145 109 290

1-13/16 46 208 138 69 242 208 138 104 2771-7/8 48 199 133 66 232 199 133 100 265

2 51 187 125 62 219 187 125 94 2502-1/16 52 184 122 61 214 184 122 92 2452-1/8 54 177 118 59 206 177 118 88 236

2-11/64 55 174 116 58 203 174 116 87 2312-1/4 57 168 112 56 196 168 112 84 2232-5/16 59 162 108 54 189 162 108 81 2162-3/8 60 159 106 53 186 159 106 80 212

2-15/32 63 152 101 51 177 152 101 76 2022-1/2 64 149 100 50 174 149 100 75 1992-9/16 65 147 98 49 171 147 98 73 1962-5/8 67 143 95 48 166 143 95 71 190

2-11/16 68 141 94 47 164 141 94 70 1872-3/4 70 136 91 45 159 136 91 68 1822-7/8 73 131 87 44 153 131 87 65 175

3 76 126 84 42 147 126 84 63 1683-1/8 79 121 81 40 141 121 81 60 1613-1/4 83 115 77 38 134 115 77 58 1533-3/8 86 111 74 37 130 111 74 56 148

3-1/2 89 107 72 36 125 107 72 54 143

Tools – Hole Saws Recommended Cutting Speeds

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-52



RUKO Hole Saws Recommended Cutting Speeds, continued

MaterialHigh carbon

structural steel up to

101,521 psi

Alloyed steel up to

145,037 psiCast iron over

36,259 psi CuZn alloyAluminium alloy up to

11% SiliconThermo-plastics Duro-plastics Wood

Vc = m/min 30 20 10 35 30 20 15 40

Coolant Cutting spray Cutting spray Compressed air Compressed air Cutting spray Water Compressed air Compressed air

Ø inch Ø mm r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m.

3-5/8 92 104 69 35 121 104 69 52 138

3-3/4 95 101 67 34 117 101 67 50 134

3-7/8 98 97 65 32 114 97 65 49 130

4 102 94 62 31 109 94 62 47 125

4-1/8 105 91 61 30 106 91 61 45 121

4-1/4 108 88 59 29 103 88 59 44 118

4-3/8 111 86 57 29 100 86 57 43 115

4-1/2 114 84 56 28 98 84 56 42 112

4-3/4 121 79 53 26 92 79 53 39 105

5 127 75 50 25 88 75 50 38 100

5-1/4 133 72 48 24 84 72 48 36 96

5-1/2 140 68 45 23 80 68 45 34 91

6 152 63 42 21 73 63 42 31 84

6-5/16 160 60 40 20 70 60 40 30 80

6-5/8 168 57 38 19 66 57 38 28 76

6-31/32 177 54 36 18 63 54 36 27 72

8-1/4 210 45 30 15 53 45 30 23 61

Note: Vc equals the recommended maximum linear speed of hole saw for each material.

Jig Saw Blades

Part # Pcs/Pkg Price Construction Tooth Spacing Recommended Applications DimensionsLength x Height x Thickness

3218009 5 $6.25HSS 24 teeth/in

Metals up to 5/64in [2mm]Fiberglass up to 5/32in [4mm]

Hard plastics, hard fabrics, pressed materials and insulation materials up to 5/16in [8mm]

77.0 x 7.1 x 1.0 mm [3.03 x 9/32 x 0.04 in]3238009 20 $23.50

3218011 5 $6.25HSS 14 teeth/in

Mild steel up to 5/16in [4mm]Stainless steel up to 7/64in [3mm]

Non-ferrous metals up to 3/8in [9.5 mm]

77.0 x 7.9 x 1.0 mm [3.03 x 5/16 x 0.04 in]3238011 20 $23.50

3218033 5 $9.25Bi-metal 21 teeth/in Mild steel, stainless steel and non-ferrous metals 1/16

to 5/32in [1.5 to 4 mm]77.0 x 7.9 x 1.0 mm

[3.03 x 5/16 x 0.04 in]3238033 20 $35.50

Note - Competitive blade specifications may vary.

3218009 shown

Wavy Side Set

Tools – Hole Saws – Recommended Cutting Speeds, continued

Tools – Jig Saw BladesRUKO T-shank jig saw blades in 5 or 20 piece sets for a variety of applications. Fits power tools by Bosch®, Atlas Copco®, AEG®, Makita®, Metabo®, Black and Decker® and Hitachi®.

• All models have a wavy side set to prevent clamping of the saw blade in the work piece.• Narrow blades (7.1 mm height) are suitable for profiled cuts.• Bi-metal blades have a high-speed steel (HSS) cutting edge and high carbon steel (HCS) spine. This makes them highly flexible with high

cutting performance and long service life for conditions where the saw blade is subjected to extreme stresses.











Deburring ToolsPart # Pcs/Pkg Price Description Common Uses

107010 1 $5.50 Universal deburring Handle, with spare blade storage compartment –

107011 1 $3.50 Steel blade holder for B blades –

107012 1 $10.00 Deburring blade - B10HSS blade most commonly used for internal and external deburring work on long-chipping materials such as

steel, aluminum, plastics etc.

107014 1 $10.00 Deburring blade - B20HSS blade used for short-chipping

materials such as brass and cast iron. Can be used in both directions.

107015 1 $11.50 Deburring blade - B30HSS blade suitable for the

simultaneous deburring of inside and outside bores in material up to 5/32”

thick.

107016 1 $8.25 Deburring blade - B50 Scriber with carbide-tipped point, regrindable.

107019 1 $3.50 Steel blade holder for C blades –

107020 1 $9.25 Deburring blade - C40Small HSS triangular scraper for

precision work on surfaces up to 5/32” wide.

107021 1 $12.00 Deburring blade - C42Large HSS triangular scraper for

precision work on surfaces up to 5/16” wide.

107025 1 $3.50 Steel blade holder for E blades –

107026 1 $11.50 Deburring blade - E100

HSS blade with B 10 cutting edge, long shank only. For internal and external deburring work on long- chipping materials such as steel,

aluminum, plastics etc.

107027 1 $11.50 Deburring blade - E200HSS blade with B 20 cutting edge,

long shank only. For short-chipping materials such as brass and cast iron.

Usable in both directions.

107028 1 $11.50 Deburring blade - E300HSS blade with B 30 cutting edge, long shank only. For simultaneous deburring of internal and external

bores in materials up to 5/32” thick.

107029 1 $11.50 Deburring blade - E350 HSS blade suitable for deburring straight edges, keyways etc.

107031 1 $3.50 Steel blade holder for F countersinks –

107032 1 $8.75 Countersink F12 HSS countersink for deburring holes up to 1/2” Dia

107033 1 $15.00 Countersink F20 HSS countersink for deburring holes up to 3/4” Dia

107034 1 $29.00 Countersink F30 HSS countersink for deburring holes up to 1-3/16” Dia

107054 1 $8.50 Deburring tool with changeable E100 Blade

Internal and External deburring on long-chipping materials such as steel,

aluminum and plastic.

Tools – Deburring Tools

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-54






















Deburring Tool KitsPart # Pcs/Pkg Price Description Includes

107003 1 $11.00Deburring Kit including

Universal Handle, B Holder, B10 and B20 Blades

107010, 107011, 107012, 107014


Universal Handle, C Holder, and C42 Blade

107010, 107019, 107021


Universal Handle, E Holder, E100, E200, and E300 Blades

107010, 107025, 107026, 107027, 107028


Universal Handle, F Holder and F20 Countersink

107010, 107031, 107033

Tools – Deburring Tool Kits























Pliers Family Overview

Combination PliersCombination pliers, or combi pliers, combine the basic functions of grip-ping and cutting in one tool. The cutting edges are suitable for cutting wire, nails, and smaller cables. The serrated gripping jaws hold flat parts and small tools tightly. The burner hole is suitable for gripping and turning items.

Wire Stripping Pliers & ToolsThese tools are suitable for strip-ping insulation from a variety of wires. Anti-slip ergonomic handles provide for user comfort and safety.

KNIPEX PliersThe world’s leading pliers brand, KNIPEX focuses on quality, performance, and setting the pace for product innovations. We offer the following KNIPEX pliers:

Gripping PliersThese pliers are designed for finer grip-ping and manipulating. Rubberized handles ensure a comfortable grip.

Cutting PliersKNIPEX cutting pliers are designed for exceptional cutting capacity and to provide better handling. These pliers are available for a variety of applications, including electronics and for cutting plastics and bolts.

Water Pump PliersThese pliers are designed to provide an infinite variable adjustment of gripping capacity. They are suitable for grip-ping large and small items, regardless of whether they are round, square, or hexagonal.

Shears, Crimpers & Circlip PliersWe offer shears for cutting copper and aluminum, tools for crimping insulated and non-insulated terminals, as well as pliers for fitting circlips into bores and shafts.

Safety PrecautionsInspect each tool BEFORE every use to ensure that it is in proper condition and not damaged.

Avoid risks for yourself and others by making sure your work environment is safe. Avoid working in dark or unlit areas.

Always wear appropriate and approved eye and hand protection.

NEVER modify or alter tools in any way.

Only use pliers for their intended purpose:• Do not use pliers on nuts and bolts. Never use them in place of a wrench or screwdriver.• Do not use pliers as a hammer.• Ensure your pliers are appropriately sized for the job at hand.• Protect pliers from rain, snow, and excessive heat. This will prevent problems such as rust and tool deformation.• Oil pliers periodically; a drop of light machine oil at the hinge will lengthen tool life and ensure ease of operation.• Always ensure that the jaws are clean and teeth are sharp before each use.• Power off equipment before cutting wires/cables.

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-56



Pliers Product Features

Long cutting edges forgreater cutting versatility High-grade special tool steel

Ergonomic slip-resistant handles

Surface treated for optimumcorrosion resistance

Slim head design for greater accessibility in tight spaces High leverage design for greater

cutting power

Thin head is perfect for working in confined or hard to reach areas

Polished edges

Multi-component comfort grip handlesprovide a slip-resistant,

high-friction grip

Durable self-locking jaws prevent workpiece slippage

Fast and comfortableadjustment by pushing

a button

Built-in pinch guard protects against blood blisters

Multiple adjustment positions ensure that the correct

capacity is reached every time




KNIPEX® Combination Pliers

0202180

0201180 0308180SBA

0908240SBA 0911240SBA

0912240SBA

High Leverage Combination Pliers

Features• High leverage increases cutting capacity

while reducing user effort by 35%• Gripping zones for flat and round material• Long cutting edges for thicker cables• Cutting edges for hard, soft, and piano wire• Hardness approximately 63 HRC• High-grade special tool steel; oil-hardened

and tempered

Lineman’s Pliers

Features• New England style head• High transmission ratio for easy cutting• Requires 40% less effort compared to

conventional combination pliers• Ergonomically designed to reduce fatigue• Rounded nose for ease of access in restricted spaces• Cutting edges for hard and soft wire• Hardness approximately 64 HRC• Vanadium electric steel; oil-hardened and tempered

High Leverage Combination Pliers

Part Number DescriptionWire Cutting Capacity Ø

Length Weight Pcs/ Pkg Price

Hard Piano Stranded

0201180 Combination pliers with polished head and plastic-coated handles

0.10 in[2.5 mm]

0.08 in[2.0 mm]

5 AWG[16.0 mm²]

7.09 in[180 mm]

7.13 oz[202 g] 1 $25.00

0202180 Combination pliers with polished head and multi-component comfort grip

8.47 oz[240 g] 1 $29.00

0308180SBA Combination pliers insulated to 1,000V with multi-component comfort grip

9.24 oz[262 g] 1 No Match!

High Leverage Lineman’s Pliers

Part Number Description Wire Cutting Capacity Ø Length Weight Pcs/ Pkg PriceMedium-hard Hard

0911240SBA New England lineman’s pliers with non-slip plastic coated handles, tape puller and crimper 0.18 in

[4.6 mm]0.12 in

[3.0 mm] 9.45 in[240 mm]

15.34 oz[435 g] 1 $56.00

0912240SBA New England lineman’s pliers with multi-component comfort grip, tape puller, and crimper

16.58 oz[470 g] 1 $60.00

0908240SBA New England lineman’s pliers, VDE tested and insulated to 1,000V with multi-component comfort grip

0.18 in[4.6 mm]

0.12 in[3.0 mm]

18.17 oz[515 g] 1 $61.00

Wire Classes

Wire Type Examples Tensile Strength lb/in² N/mm²

Soft wire Copper, plastics 31,908 220Medium-hard Nail, wire pin 108,778 750Hard Wire rope strand, steel wire 261,067 1800Piano wire Spring steel wire 333,586 2300

1,000 V

1,000 V

Inch dimensions are rounded to the nearest hundredth. HRC refers to Rockwell C Scale.


1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-58



http://www.automationdirect.com/pn/0308180SBA












KNIPEX® Gripping Pliers

2502160SBA

2501125 2502140

Snipe Nose (Needle Nose) and Electronics Pliers

Features• For gripping and cutting work in precision

mechanics• Pointed, half-round jaws• Serrated gripping surfaces• With cutting edges for soft, medium-hard

and hard wire• Cutting edge hardness approximately

61 HRC• Vanadium electric steel; oil-hardened

and tempered

2508160SBA

2611200SBA 3562145

Gripping Pliers

Part Number Description Cutting Capacity Ø Overall Length

Jaw Length

Jaw Width

Jaw Height

Curved Nose

Nose Width

Nose Height Weight Pcs/

Pkg PriceMed-hard Hard

2501125 Needle nose pliers with plastic-coated handles and wire cutter

0.09 in[2.2 mm]

0.06 in[1.6 mm]

4.92 in[125 mm]

1.06 in[27.0 mm]

0.51 in[13.0 mm]

0.28 in[7.0 mm] N/A 0.10 in

[2.5 mm]0.07 in

[1.8 mm]2.57 oz[73 g] 1 $25.00

2502140Needle nose pliers with multi-component comfort grip and wire cutter

0.10 in[2.5 mm]

0.06 in[1.6 mm]

5.51 in[140 mm]

1.65 in[42.0 mm]

0.59 in[15.0 mm]

0.31 in[8.0 mm] N/A 0.10 in

[2.5 mm]0.08 in

[2.0 mm]3.84 oz[109 g] 1 $28.50

2502160SBANeedle nose pliers with multi-component comfort grip and wire cutter

0.10 in[2.5 mm]

0.06 in[1.6 mm]

6.30 in[160 mm]

1.97 in[50.0 mm]

0.65 in[16.5 mm]

0.35 in[9.0 mm] N/A 0.12 in

[3.0 mm]0.10 in

[2.5 mm]5.08 oz[144 g] 1 $30.50

2508160SBANeedle nose pliers insulated to 1,000V with comfort grip and wire cutter

0.10 in[2.5 mm]

0.06 in[1.6 mm]

6.30 in[160 mm]

1.97 in[50.0 mm]

0.65 in[16.5 mm]

0.35 in[9.0 mm] N/A 0.12 in

[3.0 mm]0.10 in

[2.5 mm]9.24 oz[262 g] 1 $35.00

2611200SBA Needle nose pliers with wire cutter, plastic-coated handles

0.13 in[3.2 mm]

0.09 in[2.2 mm]

7.87 in[200 mm]

2.87 in[73.0 mm]

0.69 in[17.5 mm]

0.37 in[9.5 mm] N/A 0.12 in

[3.0 mm]0.10 in

[2.5 mm]5.60 oz[170 g] 1 $31.00

2622200SBA40º angled needle nose pliers with multi-component comfort grip and wire cutter

0.13 in[3.2 mm]

0.09 in[2.2 mm]

7.87 in[200 mm]

2.87 in[73.0 mm]

0.69 in[17.5 mm]

0.37 in[9.5 mm]

0.91 in[23.0 mm]

0.12 in[3.0 mm]

0.10 in[2.5 mm]

6.95 oz[197 g] 1 $42.00

3422130Precision electronics pliers with multi-component comfort grip, opening spring, and bolted joint

N/A N/A 5.31 in[135 mm]

0.89 in[22.7 mm]

0.44 in[11.2 mm]

0.26 in[6.5 mm] N/A 0.06 in

[1.6 mm]0.06 in

[1.6 mm]2.15 oz[61 g] 1 $56.00

3562145Precision electronics pliers with multi-component comfort grip, opening spring, box joint. For gripping smooth surfaces.

N/A N/A 5.71 in[145 mm]

1.57 in[40.0 mm]

0.47 in[12.0 mm]

0.29 in[7.5 mm] N/A 0.10 in

[2.5 mm]0.06 in

[1.5 mm]3.63 oz[103 g] 1 $49.50

Wire Classes



1,000 V

2622200SBA

3422130





















KNIPEX® Cutting Pliers

Cutting Pliers

Part Number DescriptionWire Cutting Capacity Ø Overall


Soft Med/Hard Hard

7202125 Diagonal cutter for plastics with multi-component com-fort grip handles and opening spring Plastics N/A 4.92 in

[125 mm]3.84 oz[109 g] 1 $36.50

7001110 Diagonal cutter with plastic-coated handles 0.12 in[3.0 mm]

0.08 in[2.0 mm]

0.05 in[1.2 mm]

4.33 in[110 mm]

2.82 oz[80 g] 1 $22.50

7001180 Diagonal cutter with plastic-coated handles 0.16 in[4.0 mm]

0.12 in[3.0 mm]

0.10 in[2.5 mm]

7.09 in[180 mm]

7.05 oz[200 g] 1 $29.50

7002160 Diagonal cutter with multi-component comfort grip 0.16 in[4.0 mm]

0.11 in[2.8 mm]

0.08 in[2.0 mm]

6.30 in[160 mm]

7.27 oz[206 g] 1 $31.50

7008180SBA Diagonal cutter, VDE tested, insulated to 1,000V with multi-component comfort grip

0.16 in[4.0 mm]

0.12 in[3.0 mm]

0.10 in[2.5 mm]

7.09 in[180 mm]

9.24 oz[262 g] 1 $39.50

7002160

6212120

7001110 / 7001180

Diagonal Cutters

Features• Induction-hardened precision cutting edges• Cutting edge hardness approximately 62 HRC• Clean cutting of thin copper wires• Narrow head style for use in confined areas• Vanadium electric steel; oil-hardened

and tempered7008180SBA

7202125

7512125

7732115ESD 7702115 7803125

Cutting Pliers

Part Number Description Wire Cutting Capacity Ø Overall Length Weight Pcs/

Pkg PriceSoft Med/Hard Hard Piano

6212120Electronics oblique cutting nipper with multi-component comfort grip, 15º angled face, opening spring

0.01-0.04 in[0.3-1.0 mm]

0.03 in[0.7 mm] N/A N/A 4.72 in

[120 mm]3.28 oz[93 g] 1 $51.00

7512125 Electronics diagonal cutter with plastic-coated handles, 16 AWG

0.01-0.05 in[0.2-1.3 mm]

0.04 in[1.0 mm]

0.02 in[0.6 mm]

0.02 in[0.4 mm]

4.92 in[125 mm]

2.82 oz[80 g] 1 $56.00

7702115 Electronics diagonal cutter with multi-component com-fort grip and opening spring, electrostatic discharge

0.01-0.06 in[0.3-1.6 mm]

0.05 in[1.2 mm]

0.02 in[0.6 mm] N/A 4.53 in

[115 mm]2.82 oz[80 g] 1 $51.00

7732115ESD Electronics diagonal cutters with electrostatic discharge protection.

0.01-0.05 in[0.3-1.3 mm]

0.04 in[1.0 mm]

0.02 in[0.5 mm] N/A 4.53 in

[115 mm]2.79 oz[79 g] 1 $56.00

7803125 Electronics Super Knips® precision cutters with multi-component comfort grip and opening spring

0.01-0.06 in[0.2-1.6 mm]

0.04 in[1.0 mm] N/A N/A 4.92 in

[125 mm]1.98 oz[56 g] 1 $30.50

Electronics Cutters

Features• Induction-hardened cutting edges• Low friction double spring for gentle and even opening• High grade special tool steel, oil-hardened and

tempered

1,000 V


Inch dimensions are rounded to the nearest hundredth.

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-60





http://www.automationdirect.com/pn/7732115ESD

http://www.automationdirect.com/pn/7732115ESD

















KNIPEX® Cutting Pliers

7122200SBA7102200SBA

7401200SBA

7401140

7408250SBA 7422200SBA

High Leverage Cutters

Features• Precision cutting edges for soft, hard,

and piano wire• Exceptional cutting performance with minimum

effort because of effective lever action design• Induction-hardened cutting edges to 64 HRC• Chrome vanadium heavy-duty steel,

oil-hardened and tempered

Cutting Pliers

Part Number DescriptionWire Cutting Capacity Ø Overall


Soft Med/Hard Hard Piano

7102200SBA High leverage compact Cobolt® cutter with multi-component comfort grip

0.24 in[6.0 mm]

0.20 in[5.2 mm]

0.16 in[4.0 mm]

0.14 in[3.6 mm]

7.87 in[200 mm]

12.87 oz[365 g] 1 $62.00

7122200SBA High leverage compact Cobolt® 20˚ angled cutter with multi-component comfort grip

0.24 in[6.0 mm]

0.20 in[5.2 mm]

0.16 in[4.0 mm]

0.14 in[3.6 mm]

7.87 in[200 mm]

13.23 oz[375 g] 1 $73.00

7401140 High leverage diagonal cutter with plastic-coated handles N/A 0.12 in

[3.1 mm]0.08 in

[2.0 mm]0.06 in

[1.5 mm]5.51 in

[140 mm]4.62 oz[131 g] 1 $32.00

7401160SBA High leverage diagonal cutter with plastic-coated handles N/A 0.13 in

[3.4 mm]0.10 in

[2.5 mm]0.08 in

[2.0 mm]6.29 in

[160 mm]6.24 oz[177 g] 1 $33.50


[4.2 mm]0.12 in

[3.0 mm]0.10 in

[2.5 mm]7.87 in

[200 mm]9.28 oz [263 g] 1 $37.00


[4.6 mm]0.14 in

[3.5 mm]0.12 in

[3.0 mm]9.84 in

[250 mm]13.76 oz[390 g] 1 $48.00

7408250SBA High leverage diagonal cutter, VDE tested, insulat-ed to 1,000V with multi-component comfort grip N/A 0.18 in

[4.6 mm]0.14 in

[3.5 mm]0.12 in

[3.0 mm]9.84 in

[250 mm]11.71 oz[332 g] 1 $59.00

7421200SBA High leverage 12˚ angled diagonal cutter with plastic-coated handles N/A 0.17 in

[4.2 mm]0.12 in

[3.0 mm]0.10 in

[2.5 mm]7.87 in

[200 mm]9.10 oz[258 g] 1 $38.00

7422200SBA High leverage 12˚ angled diagonal cutter with multi-component comfort grip N/A 0.17 in

[4.2 mm]0.12 in

[3.0 mm]0.10 in

[2.5 mm]7.87 in

[200 mm]10.58 oz[300 g] 1 $42.50

7421200SBA

Wire Classes



1,000 V


7401250SBA

7401160SBA






















KNIPEX® Cable Shears and Cutters

9512200SBA

9511165SBA 9511200SBA

Cable Shears

Features• Designed for cutting copper wire, aluminum

single- and multiple stranded cables• Precision ground, hardened blades• Not suitable for steel wire or hard drawn copper

conductors• Clean and smooth cut without crushing

or deformation• Adjustable screw joint, self-locking • Special tool steel; oil-hardened

and tempered

Cable Shears

Part Number DescriptionCutting Capacity


Solid Stranded

9511165SBA Cable shears with plastic-coated handles 0.59 in[15 mm]

1/0 AWG[50 mm²]

6.50 in[165 mm]

7.58 oz[215 g] 1 $36.50

9511200SBA Cable shears with twin cutting edge, non-slip plastic-coated handles

0.79 in[20 mm]

2/0 AWG[70 mm²]

7.87 in[200 mm]

9.98 oz[283 g] 1 $61.00

9512200SBA Cable shears with twin cutting edge, multi-component comfort grip handles

0.79 in[20 mm]

2/0 AWG[70 mm²]

7.87 in[200 mm]

11.43 oz[324 g] 1 $71.00

9522165 Cable shears with multi-component comfort grip and opening spring

0.59 in[15 mm]

1/0 AWG[50 mm2]

6.50 in[165 mm]

8.96 oz[254 g] 1 $59.00

9531250SBACable cutter with ratchet action, two-speed tooth gear drive, fixed sleeve with stand for placing tool when cutting, multi-component comfort grip

1.26 in[32 mm]

MCM 500[240 mm²]

9.84 in[250 mm]

23.85 oz[676 g] 1 $309.00

9522165

9531250SBA

Wire Classes



Initial cut: using the front cutting edge to cut the insulating sheath on larger cable diameters leaves an ergonomic handle opening width.

Final cut: where greater force is required (cutting conduc-tors), the conductor can be placed into the cutting-edge profile at the joint again. Front for initial cut - back for final cut.

Large cutting capacity Ratchet principle and two-stage ratchet drive for easier cutting


1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-62













9722240 9771180

Crimping PliersFeatures

• Threaded holes for cutting copper and brass screws (plug connector pliers)

• 9 deep troughs with conical side faces (ferrule crimper)

• Constructed of special tool steel, oil-hardened and tempered

Crimping P liers

Part Number Description Capacity # of Crimping Positions Length Weight Pcs/

Pkg Price

9722240 Crimping pliers for insulated terminals and plug connectors, multi-component comfort grip handles

18-10 AWG[0.75-6.0 mm²] 3 9.45 in

[240 mm]10.58 oz[300 g] 1 $34.00

9771180 Crimping pliers for wire end ferrules, non-slip plastic-coated handles 23-5 AWG[0.25-16.0 mm²] 9 7.09 in

[180 mm]8.47 oz[240 g] 1 $59.00

4431J22SBA 4631A22SBA

Circlip Pliers

Features• Solid style, forged• Non-slip solid tips• Chrome vanadium steel; oil-hardened

and tempered

Circlip Pliers

Part Number Description Capacity Length Weight Pcs/ Pkg Price

4431J22SBA Internal 45˚ circlip snap-ring pliers, designed to fit circlips into bores0.75-2.36 in[19-60 mm]Bore Size Ø

7.09 in[180 mm]

4.94 oz[140 g] 1 $26.50

4631A22SBA External 45˚ circlip pliers, designed to assemble external circlips on shafts

0.75-2.36 in[19-60 mm]Shaft Size Ø

7.28 in[185 mm]

4.69 oz[133 g] 1 $28.50

KNIPEX® Crimping and Circlip Pliers






http://www.automationdirect.com/pn/4431J22SBA

http://www.automationdirect.com/pn/4631A22SBA

http://www.automationdirect.com/pn/4431J22SBA

http://www.automationdirect.com/pn/4631A22SBA





KNIPEX® Wire Stripping and Dismantling Tools

1630135SB

1301160 1301614SBA

Electrician’s Pliers

Features• Designed for gripping and bending wire• Ideal for cutting soft, medium, and hard wire• Precision cutting edges induction-hardened to 60 HRC • Vanadium electric steel; oil-hardened, and tempered

Wire Stripping and Dismantling Tools

Part Number Description Stripping Capacity Cutting Capacity Ø


Med-Hard Hard

1301160 4 in 1 electrician pliers, plastic-coated handles : for gripping, cutting, stripping, and crimping

20-18/ 15 / 13 AWG[0.5-0.75 / 1.5 / 2.5 mm²]

0.10 in[2.5 mm]

0.06 in[1.6 mm]

6.30 in[160 mm]

3.95 oz[112 g] 1 $43.50

1301614SBA 4 in 1 electrician pliers, plastic-coated handles: for gripping, cutting, stripping, and crimping

14, 12, 10 AWG[2.1 / 3.3 / 5.3 mm²]

0.10 in[2.5 mm]

0.06 in[1.6 mm]

6.30 in[160 mm]

3.95 oz[112 g] 1 $44.50

1665125SB

Wire Stripping Tools

Cable Stripping Tool Features• Designed to dismantle round PVC, rubber,

silicone, PTFE cables• Self-cocking holding lever• Replaceable blade• Plastic housing; impact-resistant

Wire Stripping and Dismantling Tools

Part Number Description Stripping Capacity Ø

Stripping Capacity Cross Section Length Weight Pcs/

Pkg Price

1630135SB Shock-resistant cable stripping tool, plastic body 0.24 - 1.14 in[6.0 - 29.0 mm] N/A 5.31 in

[135 mm]4.23 oz[120 g] 1 $78.00

1639135 Spare blade for 1630135SB N/A N/A N/A 0.39 oz[11 g] 1 $16.00

1665125SB Data cable stripper, Cat 5, Cat 6, Cat 7, Twisted-Pair (UTP/STP)

0.18 - 0.39 in[4.5 - 10.0 mm]

24 - 11 AWG[0.2 - 4.0 mm²]

4.92 in[125 mm]

1.76 oz[50 g] 1 $66.00

Data Cable Stripping Tool Features• Designed to strip UTP and STP data cables• Double shell, folding back stripping tool• Opening spring and locking lever• Practical clip for safe transport• Plastic housing; fiberglass-reinforced



1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-64





http://www.automationdirect.com/pn/1630135SB








KNIPEX® Water Pump Pliers

Pliers Wrench

Part Number Description Pliers Length

Max Jaw Opening

Adjustment Positions Weight Pcs/

Pkg Price

8603150SBA Nickel-plated mini adjustable Pliers Wrench with plastic-coated handles for precision mechanics

5.91 in[150 mm]

1.06 in[27 mm] 14 6.17 oz

[175 g] 1 $57.00

8603250SBA Nickel-plated adjustable Pliers Wrench with plastic-coated handles

9.84 in[250 mm]

1.81 in[46 mm] 17 18.91 oz

[536 g] 1 $65.00

8603300SBA Nickel-plated adjustable Pliers Wrench with plastic-coated handles

11.81 in[300 mm]

2.36 in[60 mm] 22 25.71 oz

[729 g] 1 $81.00

8603300SBA

8603150SBA 8603250SBA

Pliers WrenchFeatures

• Adjustable screwing tool replaces a full set of inch and metric open end wrenches

• Designed for gripping, holding, pressing, and bending workpieces

• Zero backlash jaw surface pressure prevents damage to edges of sensitive components

• Adjustment at the touch of a button• Parallel jaws allow for gripping of all widths to the

specified maximum size

8701125SBA

8701250SBA

8701180SBA

8701300SBA

8702180SBA

Cobra® Pump PliersFeatures

• Self-locking on pipes and nuts, no slipping• Pushbutton adjustment• Low hand force required• Hardness of 61 HRC• Guard prevents finger pinching• Chrome vanadium electric steel, oil-hardened

and tempered

Cobra® Pump Pliers


Max Jaw Capacity Adjustment Positions Weight Pcs/

Pkg PricePipe Nut

8701125SBA Mini Cobra® pliers with non-slip plastic-coated handles for use in precision mechanics and hobbies

4.92 in[125 mm]

1.06 in[27 mm]

1.06 in[27 mm] 13 3.00 oz

[85 g] 1 $34.50

8701180SBA Cobra® pliers with non-slip plastic-coated handles 7.09 in[180 mm]

1.65 in[42 mm]

1.42 in[36 mm] 18 6.00 oz

[170 g] 1 $36.50


1.97 in[50 mm]

1.81 in[46 mm] 25 11.08 oz

[314 g] 1 $39.00


2.76 in[70 mm]

2.36 in[60 mm] 30 18.70 oz

[530 g] 1 $54.00

8702180SBA Cobra® pliers with multi-component comfort grip handles

7.09 in[180 mm]

1.65 in[42 mm]

1.42 in[36 mm] 18 6.91 oz

[196 g] 1 $40.00






















Alligator® Pliers



Pkg PricePipe Nut

8801180SBA Alligator® pliers with non-slip plastic-coated handles

7.09 in[180 mm]

1.26 in[32 mm]

1.18 in[30 mm] 7 6.35 oz

[180 g] 1 $26.00


9.84 in[250 mm]

1.97 in[50 mm]

1.81 in[46 mm] 9 11.25 oz

[319 g] 1 $29.00


11.81 in[300 mm]

2.76 in[70 mm]

2.36 in[60 mm] 9 18.02 oz

[511 g] 1 $43.50

8802250SBA Alligator® pliers with multi-component comfort grip handles

9.84 in[250 mm]

1.97 in[50 mm]

1.81 in[46 mm] 9 12.59 oz

[357 g] 1 $34.00

8808250SBA Alligator® pliers, VDE tested, insulated to 1,000V with multi-component comfort grip handles

9.84 in[250 mm]

1.97 in[50 mm]

1.81 in[46 mm] 9 13.97 oz

[396 g] 1 $43.50

8801300SBA

8801180SBA

8802250SBA

8808250SBA

KNIPEX® Water Pump PliersAlligator® PliersFeatures

• Can be used for outdoor work environments

• High stability box joint design• Self-locking on pipes and nuts,

no slipping• Guard prevent finger pinching• Thin V-jaw profile• Chrome vanadium electric steel;

oil-hardened and tempered• Hardness of 61 approximately HRC

Wire Classes



1,000 V

8801250SBA


1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-66













8741250SBA

KNIPEX® Water Pump PliersRaptor™ Pliers - Multiple Slip Joint SpannerFeatures

• Smooth parrot jaw design for metric and imperial nuts and screws• Self-locking from 17 mm to 32 mm• Zero backlash gripping of metric or imperial hexagonal head screws• Secure and tight grabbing of bolt heads, even those with rounded edges,

rusted nuts or heavily coated workpieces• Chrome vanadium electric steel, oil-hardened and tempered

Multiple Slip Joint Spanner


Jaw Opening

Adjustment Positions Weight Pcs/

Pkg Price

8741250SBA Raptor™ pliers - multiple slip joint spanner with non-slip plastic-coated handles

9.84 in[250 mm]

0.39-1.26 in[10-32 mm] 15 11.57 oz

[328 g] 1 $43.00

Cobra® Extra Slim Pump PliersFeatures

• Thin head allows for powerful gripping in confined work spaces• Long narrow jaws• Three-point rest provides a firm grip on flat material• Adjustment at the touch of a button directly on the workpiece• Self-locking on pipes and nuts, no slipping• High stability box joint design• Guard prevents finger pinching• Chrome vanadium electric steel, forged, oil-hardened

Extra Slim Cobra® Pliers



Pkg PricePipe Nut

8751250SBA Cobra® extra slim pump pliers with non-slip plastic-coated handles

9.84 in[250 mm]

1.26 in[32 mm]

1.34 in[34 mm] 19 11.57 oz

[328 g] 1 $41.50

8751250SBA










002005US

KNIPEX® Pliers Sets and Accessories

Pliers Sets and Accessories

Part Number Description Weight Pcs/ Pkg Price

002005US Set of 3 high-leverage diagonal cutters; 6¼” diagonal cutter (p/n 7401160SBA), 10” diagonal cutter (p/n 7401250SBA), and 8” angled diagonal cutter (p/n 7421200SBA) 2.15 lb [975 g] 3 $110.00

002006US1Set of 3 Cobra® pliers, non-slip, plastic-coated handles, push-button adjustment, thin jaw profile, self-gripping; 7” (p/n 8701180SBA), 10” (p/n 8701250SBA), and 12” (p/n 8701300SBA) lengths.

2.6 lb [1179 g] 3 $120.00

002006US2Set of 3 Pliers Wrenches, push-button adjustment, box joint, self-ratcheting, non-slip plastic-coated handles, chrome vanadium steel; 7” (p/n 8603180SBA), 10” (p/n 8603250SBA), 12” (p/n 8603300SBA) lengths

2.34 lb [1061 g] 3 $190.00

002007US1Set of 3 Alligator® pliers, chrome vanadium steel, self-gripping, thin jaw profile, non-slip plastic-coated handles; 7” (p/n 8801180SBA), 10” (p/n 8801250SSBA), and 12” (p/n 8801300SBA) lengths

2.15 lb [975 g] 3 $91.00

002072V01 2-Piece mini pliers set in practical belt pouch. Includes (1) 6” Wrench Pliers (p/n 8603150SBA and (1) 5” (p/n 8701125SBA) mini Cobra® pliers 0.77 lb [349 g] 2 $113.00

001101Twin universal control cabinet key. Two 4-way wheel wrenches connected in a space-saving way with magnets. Includes lock profiles: square (5-6, 7-8, 9-10, 11mm), triangular (7, 8-9, 10-11, 12mm), double-bit (3-5mm), half-moon (6mm), stepped square (6-9mm), reversing bit (slot 1x7mm, cross-recess PH2). Die-cast zinc material.

0.31 lb [140 g] 1 $43.50

002006US1 002006US2 002007US1

002072V01 001101

KNIPEX® Pliers Sets and Accessories

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-68















http://www.automationdirect.com/pn/002006US1



http://www.automationdirect.com/pn/002072V01




http://www.automationdirect.com/pn/002072V01





Stroboscopes and Tachometers

DT-315A Rechargeable StroboscopeThe DT-315A heavy duty, rechargeable battery powered stroboscope possesses the same great features of the DT- 311A with the added convenience of total portability via its own internal power supply. The quick recharge battery lasts up to two hours of full continuous usage at its high intensity flash rate. The DT-315A provides power flexibility by utilizing either its rechargeable internal battery or AC line power when plugged into the included AC adapter/charger unit.

DT-725 Rechargeable StroboscopeThe DT-725 portable, lightweight stroboscope with rechargeable battery possesses many of the same features as the DT-300 Series Stroboscopes, but is lighter in weight. Constructed of strengthened high-impact plastic, these rugged units are exceptionally reliable and withstand the same harsh conditions as more expensive units.

DT-311A AC Powered StroboscopeThe DT-311A heavy duty, AC-powered stroboscope provides the illusion of “stopped motion” by adjusting the strobe’s flash rate, causing the equipment to appear to be standing still or in slow motion. The DT-311A also measures rotational (RPM) or reciprocating (strokes per minute) speeds with the same precision as an electronic digital tachometer.

* Requires additional cables and / or accessories not available from AutomationDirect.

• Highly polished and focused reflector eliminates “blind” viewing areas

• External trigger for automatic synchronization with equipment*

• Phase shift allows visual analysis of rotating/reciprocating objects

• High accuracy (±0.01% of reading) is ideal for QC inspection and process control

• Synchronous output enables strobe to drive other strobes*

• Internal, fast-charging rechargeable battery supply

• Aluminum construction provides exceptional durability

• Highly polished and focused reflector eliminates “blind” viewing areas

• Continuous duty cycle eliminates need to shut down for cooling


• High accuracy ( ±0.01% of reading) is ideal for QC inspection and process control

• Bright LED display aids viewing in poorly lit areas

• Lightweight design• External trigger for automatic

synchronization with equipment*


• Easy adjust flash rate controller dial• Internal, fast-charging rechargeable

battery supply




http://www.automationdirect.com/pn/DT-315A






http://www.automationdirect.com/pn/DT-725


DT-100A Series Contact TachometersThe DT-100A Series Handheld Tachometers with microprocessor technology

offer superior accuracy and capabilities for measuring and recording rotational speed, linear speed and linear travel. DT-100A battery-oper-

ated tachometers feature rugged, high quality components.

PT-110 Non-Contact Laser TachometerThe Shimpo Model PT-110 Non-Contact Laser Tachometer is a simple-to-use, ergonomic, rugged test instrument that operates with optical laser technology. This velocity analyzing and measuring device is ideal for rotational machine inspection and process speed analysis.

DT-200LR Series Combination Laser TachometersThe DT-200LR Series Combination Contact/Non-Contact Laser Handheld Tachometers enable precise non-contact RPM measurement up to 20 feet away. The Series DT-200LR digital tachometers incorporate laser technology and feature a field-upgradeable contact adapter for linear rate measure, conveniently allowing both non-contact and contact measurements.

ST-1000 LED StroboscopeThe Shimpo ST-1000 is a Stroboscope-Tachometer with LED flash technology. This velocity analyzing and measuring device is ideal for rotational machine inspection.

**Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us for any calibration needs.

• Adjustable in either coarse or fine step flash-rate tuning

• Backlit display shows current flash rate, 10 user--stored pre-set flash rates, as well as a low battery warning

• LED technology extends operation• Typical applications are to inspect rotors,

meshing gears, vibration diagnostic equipment

• Outstanding accuracy• Rugged die-cast aluminum housing• Wide field selection of measured units• Large 5-digit display• Expansive 10 measurement memory

capacity for quick retrieval of stored data• Long battery life

• Compact, easy grip design • CE compliant with free NIST certificate.**

• Outstanding accuracy• Sophisticated laser beam detection to

20 feet provides operator safety during testing

• Rugged die-cast aluminum housing• Wide field selection of units• Large 5-digit display

• Expansive 10 measurement memory capacity for quick retrieval of stored data

• Long battery life• Available display options of either

LCD or red LED• CE compliant with free N.I.S.T.

certificate.**

• Measures RPM, Hz or Total by simply adjusting selector switch

• Lightweight, ergonomic design• Large, backlit LCD for easy viewing in

both bright and dim environments

• Automatically records Maximum, Minimum, Last Value as well as up to 96 data points during testing

• Laser operation shows point of measurement for easy aiming on equipment

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-70



http://www.automationdirect.com/pn/ST-1000


http://www.automationdirect.com/pn/PT-110


Handheld Tachometers

Features• Outstanding accuracy for the strictest applications• Rugged die-cast aluminum housing enables usage in the harshest

conditions• Wide field selection of units in both instantaneous rate as well as

totalized length satisfies a multitude of user requirements• Large 5-digit display aids user visibility• Expansive 10 measurement memory capacity allows quick retrieval

of stored data plus additional last, maximum & minimum values• Long battery life (25-40 hrs. continuous use)• Compact, ergonomic design allows easy grip• Rear threaded inserts (1/4-20 x 5/16 in.) provide additional

mounting options• Available display options of either LCD or vibrant, bright red LED• CE compliant. Includes free NIST certificate.*• 2-year warranty

DT-100A Series Contact TachometersThe DT-100A Series Handheld Tachometers with micropro-cessor technology offer superior accuracy and capabilities for measuring and recording rotational speed, linear speed and linear travel. The DT-100A battery-operated tachom-eters feature the rugged, high quality components that have made them the benchmark in the industry. These user friendly, value-packed units offer memory storage, quick adjustment units knob, length functions, retrieval of last and maximum and minimum values. Each unit also comes standard with a free NIST certificate.* Units are available with an LCD or vibrant red LED display.

DT-107A

DT-100A Series Handheld TachometersPart

Number Description Price

DT-105A Handheld tachometer, contact, 5-digit LCD display $257.00

DT-107A Handheld tachometer, contact, 5-digit LED display $257.00

Included AccessoriesEach DT-100A Series Handheld Tachometer includes (2) 1/2-inch cone adapters, a 1/2-inch funnel adapter, a 6-inch circumference measuring wheel, a 3.5-inch extension shaft, two AA alkaline batteries and carrrying case. Additional and replacement accessories can be found on the following page.

carrying case

DT-100A Series Tachometer

(DT-105A shown)

* NIST certificates are valid one year from the date the unit ships from Shimpo to AutomationDirect. In order to maintain stock levels for immediate availability, up to six-months “shelf time” may have elapsed before a unit is received by the customer.

DT-105A

DT-FPM-6

EXT-SHAFT

DT-FUNNEL

Calibration services are not available from AutomationDirect. Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us for any calibration needs.

DT-CONE




http://www.automationdirect.com/pn/EXT-SHAFT

http://www.automationdirect.com/pn/DT-FUNNEL

http://www.automationdirect.com/pn/DT-FPM-6






http://www.automationdirect.com/pn/DT-CONE

DT-100A Series SpecificationsDisplay Range 0.10 - 25,000 RPM with floating decimal

Accuracy±0.06 RPM @ 0.10 - 999.9 RPM

±0.6 RPM @ 1,000.0 - 9,999.9 RPM ±0.006% of reading ±1 digit (±2 RPM max.) 10,000 - 25,000 RPM

Display DT-105A – 5-digit 0.47 in. (12 mm) high LCD DT-107A – 5-digit 0.40 in. (10 mm) high LED

Measuring UnitsRevolution: RPH, RPM; Feet: FPH, FPM; Miles: MPH; Yards: YPH, YPM; Inches: IPM; Meters: mPH, mPM;

Length: m, cm, inches, feet, yards; Total Revolutions: REV

Memory System 13 readings are stored in memory and retained for 5 minutes (last, max., min., and 10 extra measurements)

Detection Optical coupler, 60 pulses/rev.

Update Time 1 second (typical)

Power Requirement 2 AA 1.5V batteries (Approx.life - DT-105A: 65 hrs.; DT-107A: 40 hrs.)

Operating Temperature 32 - 113 °F (0 - 45 °C)

Construction Die-cast aluminum housing


Agency Approvals CE

Dimensions 7.2 in. L x 2.4 in. W x 1.8 in. H (182.5 mm x 60 mm x 46 mm)

AccessoriesDT-100A Series Accessories


DT-CONE Replacement standard cone adapter for Shimpo DT series handheld tachometers, 1/2 inch diameter $6.75

EXT-SHAFT Replacement extension shaft for Shimpo DT series handheld tachometers, 3-1/2 inch length $11.50

DT-FPM-6 Replacement measuring wheel for Shimpo DT series tachometers, 6 inch circumference $31.50

DT-FPM-12 Measuring wheel for Shimpo DT series handheld tachometers, 12 inch circumference $52.00

DT-FUNNEL Replacement standard funnel adapter for Shimpo DT series tachometers, 1/2 inch diameter $6.75

Handheld TachometersDT-100A Series Contact Tachometers

DT-FPM-12

DT-FPM-6

EXT-SHAFT

DT-FUNNEL

DT-CONE

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-72


















Features• Outstanding accuracy for the strictest applications• Sophisticated laser beam detection to 20 feet provides operator safety

during testing• Rugged die-cast aluminum housing enables usage in the harshest

conditions• Wide field selection of units in both instantaneous rate as well as

totalized length satisfies a multitude of user requirements• Large 5-digit display aids user visibility• Expansive 10 measurement memory capacity allows quick retrieval of

stored data plus additional last, maximum & minimum values• Long battery life (25-40 hrs. continuous use)• Compact, ergonomic design allows easy grip• Rear threaded inserts (1/4-20 x 5/16 in.) provide additional mounting

options• Available display options of either LCD or vibrant, bright red LED• CE compliant. Includes free N.I.S.T. certificate.*• 2-year warranty

DT-200LR Series Combination Laser TachometersThe DT-200LR Series Combination Contact/Non-Contact Laser Handheld Tachometers enable precise non-contact RPM measurement up to 20 feet away. The Series DT-200LR digital tachometers incorporate laser technology yet retain rugged construction and reliable quality components. These instruments feature a field-upgradeable contact adapter for linear rate measure, conveniently allowing both non-contact and contact measurements. These user friendly, value-packed units feature memory storage, quick adjustment units knob, length func-tions, retrieval of last, maximum and minimum values. Each unit comes standard with a free NIST certificate*. Units are available with an LCD or vibrant red LED display.

DT-205LR

DT-207LR

DT-200LR Series Handheld TachometersPart


DT-205LR Handheld tachometer, non-contact / contact, 5-digit LCD display $291.00

DT-207LR Handheld tachometer, non-contact / contact, 5-digit LED display $291.00

Included AccessoriesEach DT-200LR Series Handheld Tachometer includes a contact adapter, (2) 1/2-inch cone adapters, a 1/2-inch funnel adapter, a 6-inch circumference measuring wheel, a 3.5-inch extension shaft, 1-inch x 7.75-inch reflective tape, (2) AA alkaline batteries and carrrying case. Additional and replacement accessories can be found on the following page.

DT-200LR Series Tachometer

(DT-205LR shown)

* NIST certificates are valid one year from the date the unit ships from Shimpo to AutomationDirect. In order to maintain stock levels for imme-diate availability, up to six-month “shelf time” may have elapsed before a unit is received by the customer.

carrying case

DT-FPM-6

EXT-SHAFT

DT-FUNNEL

DT-ADP-200LR

DT-TAPE

Calibration services are not available from AutomationDirect. Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us for any calibration needs.

DT-CONE




http://www.automationdirect.com/pn/DT-ADP-200LR



http://www.automationdirect.com/pn/DT-205LR






http://www.automationdirect.com/pn/DT-TAPE


DT-200LR Series SpecificationsDisplay Range 6 - 99,999 RPM

Accuracy±1 RPM @ 6 - 8,300 RPM

±2 RPM @ 8,300 - 25,000 RPM ±0.006% of reading ±1 digit (±6 RPM max.)

25,000 - 99,999 RPM

Display DT-205A – 5-digit 0.47 in. (12 mm) high LCD DT-207A – 5-digit 0.40 in. (10 mm) high LED

Measuring UnitsRPM (using included contact adapter)

YPM, mPM, FPM, IPM, and Length: YRD, m, FT and INUse wheel with 200L adapter

Measuring Distance 1 in. (25.4 mm) to 20 feet (6m)

Memory System 13 readings are stored in memory and retained for 5 minutes (last, max., min., and 10 extra measurements)

Detection Laser diode / contact

Update Time 1 second (typical)

Power Requirement 2 AA 1.5V batteries (Life: Approx. 25 hrs.)


Construction Die-cast aluminum housing


Agency Approvals CE

Dimensions6.6 in. L x 2.4 in. W x 1.8 in. H (167.5 mm x 60 mm x 46 mm)

With contact adapter: Length = 8.25 in. (209 mm)

AccessoriesDT-200LR Series Accessories


DT-CONE Replacement standard cone adapter for Shimpo DT series handheld tachometers, 1/2 inch diameter $6.75

DT-ADP-200LR Replacement contact adapter for Shimpo DT-205LR or DT-207LR handheld tachometers $73.00

EXT-SHAFT Replacement extension shaft for Shimpo DT series handheld tachometers, 3-1/2 inch length $11.50

DT-FPM-6 Replacement measuring wheel for Shimpo DT series tachom-eters, 6 inch circumference $31.50

DT-FPM-12 Measuring wheel for Shimpo DT series handheld tachometers, 12 inch circumference $52.00

DT-FUNNEL Replacement standard funnel adapter for Shimpo DT series tachometers, 1/2 inch diameter $6.75

DT-TABReflective tabs, sheet of (35) 1/2-inch squares, for use with Shimpo DT-205LR, DT-207LR and PT-110 handheld tachometers

$3.20

DT-TAPEReplacement reflective tape strip, 1 x 7-3/4 inch, for use with Shimpo DT-205LR, DT-207LR and PT-110 handheld tachometers

$2.60

Handheld TachometersDT-200LR Series Combination Laser Tachometers

DT-TAB

DT-FPM-12

DT-FPM-6

EXT-SHAFT

DT-FUNNEL

DT-CONEDT-ADP-200LR

DT-TAPE

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-74























http://www.automationdirect.com/pn/DT-TAB





Features• Measures RPM, Hz or Total by simple adjusting selector switch• Lightweight, ergonomic design allows comfortable long term usage• Large, backlit LCD for easy viewing in both bright and dim

environments• Automatically records Maximum, Minimum, Last Value as well as up to

96 data points during testing. Quickly review after testing by pushing the MEM button.

• Laser operation shows point of measurement for easy aiming on equipment

PT-110 Non-Contact Laser TachometerThe Shimpo Model PT-110 Non-Contact Laser Tachometer is a simple-to-use, ergonomic, rugged test instrument that operates with optical laser technology. This velocity analyzing and measuring device is ideal for rotational machine inspection and process speed analysis. The PT-110 features a large backlit LCD screen that provides clear viewing in any environment. Users can obtain results in either Hertz or RPM, as well as Total counts with the simple selection switch. During testing, the unit automatically saves maximum, minimum, last recorded values and up to 96 logged data readings. The compact, lightweight PT-110 Tachometer comes standard with reflective tape, 3 AAA batteries and protec-tive carrying case.

PT-110

PT-110 Handheld TachometerPart


PT-110 Handheld tachometer, non-contact, 5-digit LCD display $110.00

PT-110 SpecificationsDisplay Range 2.5 - 99,999 RPM; 0.05 - 1666 Hz; 1 - 99999 Count

Resolution0.1 RPM (2.5 - 999.9 RPM) 1 RPM (above 1000 RPM) 0.01 Hz (0.05 - 99.99 Hz)

0.1 Hz (above 100 Hz)

Display 5 digit, 0.7 in. (18 mm) LCD

Accuracy ± 0.05% + 1 digit

Sampling Time 0.8 second (over 60 RPM)

Detection Laser

Measuring Distance 2 - 20 in. (50 - 500 mm)

MemoryAutomatically stores Maximum (UP), Minimum (DN), last value

(LA) and up to 96 readings for review. Maximum speed for reading storage is every 0.8 seconds.

Dimensions 6.1 in. L x 2.8 in. W x 1.4 in. H (155 mm x 70 mm x 35 mm)

Power (3) AAA 1.5V batteries

Enclosure ABS plastic housing



Agency Approvals N/A

Included Accessories (3) AAA alkaline batteries, protective carrying case, reflective tape.

PT-110 Accessories


DT-TAB Reflective tabs, sheet of (35) 1/2-inch squares, for use with Shimpo DT-205LR, DT-207LR and PT-110 handheld tachometers $3.20

DT-TAPE Replacement reflective tape strip, 1 x 7-3/4 inch, for use with Shimpo DT-205LR, DT-207LR and PT-110 handheld tachometers $2.60





















Handheld Stroboscopes

Features• Aluminum construction provides exceptional durability• Highly polished and focused reflector eliminates “blind”

viewing areas• External trigger allows unit to be automatically synchronized

with equipment*• Continuous duty cycle eliminates need to shut down for cooling• Phase shift allows visual analysis of rotating/reciprocating objects• High accuracy ( ±0.01% of reading ) is ideal for QC inspection and

process control• Synchronous output enables strobe to drive other strobes*• Flash timer control conserves flash tube life• Easy tripod or permanent mounting with 1/4-20 UNC x 5/16 in. deep

integral mounting thread • Grounded power cord, 9-feet long• 2-year warranty

DT-311A AC Powered StroboscopeThe DT-311A heavy duty, AC-powered stroboscope provides the illusion of “stopped motion” by adjusting the strobe’s flash rate, causing the equipment to appear to be standing still or in slow motion. The DT-311A also measures rotational (RPM) or reciprocating (strokes per minute) speeds with the same precision as an electronic digital tachometer. The DT-311A stroboscope is ideally suited for printing inspection, motion analysis, preventive maintenance and speed measurement of repetitive motion. The DT-311A strobe provides timely data on vibrating parts, leaks, spray patterns and a variety of industrial and scientific operations. The unit is extremely easy to maneuver and operate via its light-weight and compact design and simplified user interface. Its rugged metal construction provides unequaled reliability in the harshest environments.

DT-311A

DT-311A AC Powered StroboscopePart Number Description Price

DT-311A Heavy-duty digital stroboscope, 120VAC input, 5-digit LED display $548.00

DT-311A SpecificationsFlashing Range 40.0 - 35,000 FPM (flashes per minute)

Accuracy ±0.01 % of reading

Resolution0.1 FPM: 40.0 - 5,000 FPM 0.2 FPM: 5,001 - 8,000 FPM 0.5 FPM: 8,001 - 10,000 FPM 1 FPM: 10,001 - 35,000 FPM

Display Update Time 0.2 seconds approximate

Output Signal Synchronous, 400 μsec Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance

Rate Multiplier / Divider Multiply by 2, Divide by 2

External Mode Accuracy ±0.01 % ±1 digit

Phase Shift 0 to 359° with 1° resolution

Delay Time 0 to 2,000 msec from 40 - 10,000 FPMExternal Trigger Input Signal

LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open collector (NPN),pulse width 50 μsec min.

Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V

Display 5 digit, 0.4 in. (10 mm) high, LED

Flashtube Power/Life Xenon, 10 W max. (100 million flashes)

Flash Duration 10 - 40 μsec

Sensor Power Supply 12 VDC (40 mA)

Power Requirement 115 VAC ±10% 60/50 Hz, 30 VA

Operating Temperature 32 - 104°F (0 - 40°C)

Weight 2.6 lbs (1.18 kg)


Agency Approvals CE

Construction Aluminum



DT-CARRYING-CASE Carrying case for DT-311A or DT-315A stroboscopes $125.00

FLASHTUBE311-2 Replacement flashtube for DT-311A or DT-315A stroboscopes $49.00

DT-SG-300 Rubber strobe guard for DT-311A or DT-315A stroboscopes $103.00

* Requires additional cables and / or accessories not available from AutomationDirect. Contact Shimpo Instruments at (800) 237-7079 or www.shimpoinst.com/contact-us

DT-CARRYING-CASE

FLASHTUBE311-2

DT-SG-300

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-76



http://www.automationdirect.com/pn/DT-CARRYING-CASE


http://www.automationdirect.com/pn/FLASHTUBE311-2


http://www.automationdirect.com/pn/DT-SG-300



















Features• Internal, fast-charging rechargeable battery supply• Aluminum construction provides exceptional durability• Highly polished and focused reflector eliminates “blind”

viewing areas• External trigger allows unit to be automatically synchronized

with equipment*• Continuous duty cycle eliminates need to shut down for cooling• Phase shift allows visual analysis of rotating/reciprocating objects• High accuracy ( ±0.01% of reading ) is ideal for QC inspection and

process control• Synchronous output enables strobe to drive other strobes.*• Flash timer control conserves flash tube life• Easy tripod or permanent mounting with 1/4-20 UNC x 5/16 in. deep

integral mounting thread• 2-year warranty

DT-315A Rechargeable StroboscopeThe DT-315A heavy duty, rechargeable battery powered stroboscope possesses the same great features of the DT-311A with the added convenience of total portability via its own internal power supply. The quick recharge battery lasts up to two hours of full continuous usage at its high intensity flash rate. The DT-315A provides power flexibility by utilizing either its rechargeable internal battery or AC line power when plugged into the included AC adapter/charger unit. These features make the DT-315A ideal for quality inspection and preventive maintenance of automated motion equipment.

DT-315A

DT-315A Rechargeable StroboscopePart Number Description Price

DT-315A Heavy-duty digital stroboscope, battery powered with 120VAC charger, 5-digit LED display $738.00

DT-315A SpecificationsFlashing Range 40 - 35,000 FPM (flashes per minute)


Resolution0.1 FPM: 40.0 - 5,000 FPM 0.2 FPM: 5,001 - 8,000 FPM 0.5 FPM: 8,001 - 10,000 FPM 1 FPM: 10,001 - 35,000 FPM

Display Update Time 0.2 seconds approximate

Output Signal Synchronous, 400 μsec Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 K Ω impedence


External Mode Accuracy ±0.01 % ±1 digit

Phase Shift 0 to 359° with 1° resolution

Delay Time 0 to 2,000 msec from 40 - 10,000 FPMExternal Trigger Input Signal

LO level: 0 -0.8 VDC, HI level: 2.5 - 12 VDC or open collector (NPN),pulse width 50 μsec min.

Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V

Display 5 digit, 0.4 in. (10 mm) high, LED



Sensor Power Supply 12 VDC (40 mA)

Battery Life 1 - 2 hours depending on flash rate

Power Requirement Rechargeable Battery or AC Line Power with included AC adapter


Weight 4.4 lbs (2 kg)


Agency Approvals CE

Construction Aluminum



DT-CARRYING-CASE Carrying case for DT-311A or DT-315A stroboscopes $125.00

FLASHTUBE311-2 Replacement flashtube for DT-311A or DT-315A stroboscopes $49.00

DT-SG-300 Rubber strobe guard for DT-311A or DT-315A stroboscopes $103.00

BAT-DT315A-P Replacement internal battery for DT-315A stroboscope $119.00

DT-315CHARGER Replacement AC adapter / charger for DT-315A stroboscope, 100-240 VAC $115.00


DT-CARRYING-CASE

FLASHTUBE311-2DT-SG-300

BAT-DT315A-P

DT-315CHARGER








http://www.automationdirect.com/pn/DT-315CHARGER

http://www.automationdirect.com/pn/DT-315CHARGER

http://www.automationdirect.com/pn/BAT-DT315A-P

http://www.automationdirect.com/pn/BAT-DT315A-P






















Features• Bright LED display aids viewing in poorly lit areas• Lightweight design• External trigger allows unit to be automatically synchronized

with equipment*• Continuous duty cycle eliminates need to shut down for cooling• Phase shift allows visual analysis of rotating/reciprocating objects• Easy adjust flash rate controller dial• Synchronous output enables strobe to drive other strobes*• Easy tripod or permanent mounting with 1/4-20 UNC x 5/16 in. deep

integral mounting thread• Internal, fast-charging rechargeable battery supply• 2-year warranty

DT-725 Rechargeable StroboscopeThe DT-725 portable, lightweight stroboscope with rechargeable battery possesses many of the same features as the DT-300 Series Stroboscopes, but are lighter in weight. Constructed of strengthened high-impact plastic, these rugged units are exceptionally reliable and withstand the same harsh conditions as more expensive units. Employing its unique phase shifting feature, the DT-725 “freezes” rotating or reciprocating machinery for visual inspection of covered gear teeth, shafts, oil/fuel/ink injector patterns, and print media; all without stopping production.

These features make the DT-725 ideal for quality inspection and preventive maintenance of automated motion equipment. Units can be ordered separately or as a convenient kit.

DT-725

DT-725 Rechargeable StroboscopePart


DT-725 Lightweight digital stroboscope, with rechargeable internal battery $519.00

DT-725KIT Lightweight digital stroboscope kit, DT-725, fast charger, case $662.00

DT-725 SpecificationsFlashing Range 40.0 - 12,500 FPM (flashes per minute)


Resolution0.1 FPM: 40.0 - 4,999 FPM

0.2 FPM: 5,000 - 7,999.9 FPM 0.5 FPM: 8,000 - 9,999.5 FPM 1 FPM: 10,001 - 12,500 FPM

Phase Shift Use +/- push buttons (360° in 6 seconds)

Display Update Time Ext. mode: varies with flashing rate

Output Signal NPN open collector (24 VDC max., 50 mA), 150 μsec typical


External Trigger Input Signal

a) 12 - 24 VDC thru a 3-wire NPN output sensor (requires external power)

b) 12 VDC thru a 2-wire proximity sensor (leakage current 1 mA max., load current 8 mA min.)

c) Switch or relay contact

Display 5 digits, 0.4 in. (10 mm) high, LED



Low Battery Indicator Flashing LED

Battery Life 1 - 2 hours depending on flash rate

Power Requirement 115 VAC ±10% 60/50 Hz / Internal battery pack*


Weight 2.75 lbs (1.25 kg)


Agency Approvals CE

Construction ABS Plastic*Note - Batteries are not field replaceable. For battery replacement contact Shimpo

Instruments at (800) 237-7079.

AccessoriesDT-725 Accessories


FLASHTUBE721 Replacement flashtube for DT-725 stroboscope $49.00

DT-12V120 Replacement AC adapter / charger for DT-725 stroboscope, 120 VAC $28.00


FLASHTUBE721

DT-12V120

1 - 8 0 0 - 6 3 3 - 0 4 0 5tTTE-78



http://www.automationdirect.com/pn/FLASHTUBE721

http://www.automationdirect.com/pn/FLASHTUBE721

http://www.automationdirect.com/pn/DT-725KIT

http://www.automationdirect.com/pn/DT-12V120

http://www.automationdirect.com/pn/DT-12V120













Handheld StroboscopesST-1000 LED StroboscopeThe Shimpo ST-1000 is a Stroboscope-Tachometer with LED flash technology. This velocity analyzing and measuring device is ideal for rotational machine inspection. The stroboscope is capable of flashing the light in a synchronous frequency to the operating machinery. This creates the illusion of viewing stopped or slowed images so that machine parts and processes may be inspected for defects. Plus, the rotational speed of the machinery and systems may be recorded for further performance analysis.

The ST-1000 is adjustable in either coarse or fine step flash-rate tuning. The backlit display shows the current flash rate, 10 user-stored pre-set flash rates, as well as a low battery warning. The backlit feature can be switched off to save battery life if desired. The ergonomic, handheld device is made of sturdy ABS plastic and comes with batteries and protective carrying case. The LED tech-nology extends operation due to the low energy requirement of the light diodes compared with xenon stroboscopes. Typical applica-tions for the ST-1000 are to inspect rotors, meshing gears, vibration diagnostic equipment, textile equipment, printing production lines, power tools, speaker acoustical analysis, fan balancing and many more.

ST-1000

ST-1000 LED StroboscopePart


ST-1000 Portable LED stroboscope, disposable battery powered, 5-digit backlit LCD display $199.00

ST-1000 SpecificationsRange 60 - 40,000 FPM (flashes per minute)

Accuracy ± 0.05% FS

Lux Rating650 Lux @ 3000 RPM & 3.9 in (10 cm) 350 Lux @ 3000 RPM & 7.9 in (20 cm) 185 Lux @ 3000 RPM & 11.8 in (30 cm)

Display 5 digit with backlight 40000 maximum reading

Resolution < 1000 FPM: 0.1 FPM > 1000 FPM: 1 FPM

Tuning <1000 FPM: Coarse=10 FPM increments; Fine= 0.1 FPM increments. >1000 FPM: Coarse=100 FPM increments; Fine= 1 FPM increments

Rate Storage10 stored user-defined flash rates.

Factory Defaults: 4000, 8000, 12000, 16000, 20000, 24000, 28000, 32000, 36000, 40000.

Power Supply (4) AA alkaline batteries


Housing ABS plastic


Weight Approx. 0.44 lb (0.2 kg)

Included Accessories Protective carrying case, (4) AA batteries

Agency Approvals CE












electrical tools/wiring tools/hole cutting tools/drill bits/hole saws

Documents