electrofusion purge tee for gas – sdr 11 (iso s5) tee.pdf · pt90-3"x32yea...
TRANSCRIPT
B-20, MIDC, Ambad, Nashik - 4220 10,Maharashtra, INDIA.
Tel : +91 253 6622701/2Fax: +91 253 6604710
Common Applications:
• Purging of MDPE 80 mains and distribution pipes in a gas
distribution network.
• Gas Purging in areas difficult to access in narrow trenches.
Advantages :
• Fitting Pressure Rating – SDR 11
• One product fits 2 or more pipe sizes including IPS sizes enabling
substantial time and cost saving in service connections.
• Brings down inventory and associated costs.
• Can be supplied with reusable threaded PE-Metal adaptor for
quick connection of riser pipes to the purge tee.
• Same fusion time for various SDR rated pipes.
• Optimal fusion and cold zone for a strong and sturdy joint.
• Permanent Batch Indicator, Raw Material Grade and SDR
marking.
• Each fitting individually packed in PE bag to protect against
contamination and oxidation.
Kimplas Electro-fusion fitting Purge Tee manufactured in PE80 Yellow grade are Standard SDR 11 rated. For exact recommendations on
compatibility, for welding with SDR 9 through SDR 11 pipes, refer Kimplas Technical Specifications Manual. Kimplas Purge Tees are specially
designed for direct purging of MDPE 80 Gas mains and distribution pipes of different diameters, both in straight form as well as coiled form. The tees
are also used for pressure points and temporary bypass loops on PE Gas piping.
Installation :
Joint preparation must be done as specified in the installation
instructions. Pipe outside surface must be scraped to remove oxidised
layer. Before fusing, pipe ends and spigot end of the fittings must be
cleaned to remove dirt and contamination. Complete Installation
Instruction Manual may be downloaded.
Electrofusion Purge Tee for Gas – SDR 11 (ISO S5)
Standards:
• EF components comply with GIS PL 2 Part 4
• PE pipe compatibility- IS: 14885, ISO: 4437, GIS PL 2/2, EN:1555-2
For details about our other products and specifications please refer the corporate websiteDisclamer : Kimplas reserve the right to modify product without prior notice, as part of its continual improvement programme. Whilst every effort is taken to
ensure the accuracy of information contained in the data Sheet, Kimplas accepts no liability for matters arising as a result of errors or omissions.
Gas-Rev
02/A
ug�16
Note : SP = Standard Pack Quantity, g = Weight in Grams, F-T = Fusion Time in Seconds, C-T = Cooling Time in Minutes
dWeight
GramsHPE 80 Yellow
4.7mm Pin Terminal
d63-2"-75X32mm
d90-3"x32mm
d110-4"-140x32mm
d160-213-8"x32mm
d225-250-x32mm
d63-2"x63mm
d75x63mm
d90-3"x63mm
d110-125-4"x63mm
LO
128
123
117
123
112
163
163
187
182
110
110
110
110
110
136
136
136
136
PT63-2"-75X32YEA
PT90-3"X32YEA
PT110-4"-140x32YEA
PT160-213-8"X32YEA
PT225-250-X32YEA
PT63-2"X63YEA
PT75X63YEA
PT90-3"X63YEA
PT110-125-4"X63YEA
70
80
80
80
80
70
70
70
70
4
4
4
4
4
4
4
4
4
210
225
304
238
305
315
333
364
367
30
30
30
26
18
20
20
10
10
PRODUCT CODESP F-T C-T