electrolux refrigerator - marcone servicers...
TRANSCRIPT
ELECTROLUX REFRIGERATOR
Marketing
Information Luxury-Design™ Formed-Glass Shelving
Luxury-Design™ shelving system features Luxury-Glide™ slide-out, formed-glass
shelves that are as beautiful as they are functional. These shelves are the only full-
sized, refrigerator-depth shelves in a counter-depth refrigerator. Fully extendable
glidesoffer convenience and ease of use.
Marketing
Information Luxury-Lighting™
Luxury-Lighting™ features tri-level,
ultrawhite, shadowless interior lighting — premium theatre-styled lighting that gently
increases from soft to full intensity.
Marketing
Information PureAdvantage™ Filtration Systems
PureAdvantage™ Ice, Water and Air filtration systems — total filtration for your refrigerator.
Convenient access to the top shelf allows filters to be changed easily.
Marketing
Information Chill Zone™ Drawer
Chilled air is vented directly into this Luxury-Glide™ drawer to keep contents extra cold.
Marketing
Information Luxury-Glide™ Crispers
Drawers smoothly glide out and keep produce fresh with adjustable humidity
control and minimal temperature variation.
Specifications
Counter-Depth Refrigerator Specifications • Product Weight – 300 Lbs. • Voltage Rating –120V/60Hz/15 or 20 Amps • Connected Load (kW Rating) @120 Volts = 1.02kW • Amps @120 Volts = 8.5 Amps • Optimum door swing factory set for 130°. When installing
next to wall where handle may make contact, allow 4- 1/2" minimum clearance for 90° door swing. At 90° door stop position, drawer access will be maintained but removal will be restricted.
•Minimum opening of 70-3/8"H x 36"W x 24"D required for standard “Built-In Look.” (70-1/4"H to be measured from finished floor to underside of overhead cabinet.)
Specifications
Side-by-Side Refrigerator Specifications • Product Weight – 325 Lbs. • Voltage Rating –120V/60 Hz/15 or 20 Amps • Connected Load (kW Rating) @120 Volts = 1.02kW • Amps @120 Volts = 8.5 Amps • Optimum door swing factory set for 130°. When installing
next to wall where handle may make contact, allow 4- 1/2" minimum clearance for 90° door swing. At 90° door stop position, drawer access will be maintained but removal will be restricted.
• Minimum opening of 70-3/8"H x 36"W x 28-7/8"D required for standard “Built-In Look.” (70-1/4"H to be measured from finished floor to underside of overhead cabinet.)
Two Types of Controls
Wave-Touch™ Electronic Controls
Picture and comments
TEARDOWN
• Dispenser/Interface Board
• Ice Producing System
• Water/Filter System
• Damper Assembly
• Refrgeration Component Compartment
MAIN BOARD ASSEMBLY
Main board is under the refrigerator – held in with one screw
Dispenser and Interface Control
PRY CAREFULLY!!!
Remove ? Screws.
Dispenser and Interface Control
Dispenser and Interface Control
Dispenser and Interface Control
Dispenser and Interface Control
Dispenser Components
Dispenser Components
Ice Bucket Mount
Filters
Water Air Charcoal Filter
Damper Assembly
Cover
Damper Assembly
Removing Cover
Remove one screw
Water Inlet System
Condenser Fan
Compressor