electronic blasting i-kon™ iii electronic blasting system
TRANSCRIPT
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 1
General
i-kon™ III ELECTRONIC BLASTING SYSTEM PRODUCT CATALOG NORTH AMERICA
MAY 2021
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 2
General
CONTENTS
i-kon™ III System Hardware 6
i-konTM III Logger II 6
i-konTM III Blaster 400 6
i-konTM III Blaster 3000 LAN / WLAN 7
i-konTM III Blaster 3000 SATEL 7
i-konTM III Blaster 3000 Analogue Telephone 8
i-konTM III Blaster 3000 Leaky Feeder UHF 9
i-konTM III UG B3000 Head End Modem Leaky Feeder (UHF) 9
i-konTM III Blaster 3000 Leaky Feeder VHF 10
i-konTM III UG B3000 Head End Modem Leaky Feeder (VHF) 10
i-konTM III Blaster 3000 Moxa 11
i-konTM III Leaky Feeder LAN Extender Kit 11
i-konTM III Blaster 3000 LTE M1 12
i-kon™ III Accessories (Cables, Connectors, and Miscellaneous) 13
SHOTPlus™ Software 13
EBS XS880 SERIAL Converter, USB 2.0 TO RS232 13
EBS Connector Dock 13
EBS Connection Box for Logger I & Logger II 14
Universal Beep Booster 14
i-kon™ Field Connector 6 14
i-kon™ Field Connector 6 with 100g Grease Tube 15
EBS Silicone Grease 15
Copy Cable 15
Download Cable 16
Stethoscope Cable 16
Connection Cable Logger I or II to Blaster 16
90° Connection Cable Logger I or II to Blaster 17
EBS Banana Plug to Alligator Clip Test Lead 17
EBS Banana to Banana Connection Cable 17
Logger I or II to Splice Cable 17
Spare B3000 Analogue Phone Cable 18
Blaster 3000 LAN Network Cable 18
Spare B3000 Cable to LAN Modem 18
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 3
General
EBS Multi Use Charger 18
EBS Multi Use Vehicle Charger 19
Blaster 3000 AC Power Supply 19
i-kon™ 2.2 KΩ Resistor 19
EBS Protective Cable End CAP 19
UG B3000 Cap Antenna Socket 20
i-kon™ Charging Port Connector Cap for B3000 20
EBS Equipment Binder Cap 20
EBS Wire Deployment Tool 20
EBS Carry Bag Strap 21
EBS Sling Bag 21
Logger I Nylon Carry Bag (Blue) 21
Blaster 400 Nylon Carry Bag (Red) 21
EBS Scanner 200/260, Logger II, & Tester III Bag 22
EBS Shoulder Harness 22
EBS Logger II Carrying Bag 22
EBS Black Right Sling Bag 22
EBS Black Left Sling Bag 23
EBS Cargo Sling 23
EBS Harness System 23
EBS Antenna 90° TNC Elbow 23
EBS Antenna (440-470MHz) TNC 24
EBS TNC Magnetic Mobile Antenna Base 24
UG B3000 Leaky Feeder Antenna (VHF) 24
UG B3000 Leaky Feeder Antenna (UHF) 25
EBS Leaky Feeder Antenna 90* BNC Elbow 25
UG B3000 Leaky Feeder Antenna 25
UG B3000 Leaky Feeder Antenna Magnetic Base 25
UG B3000 Leaky Feeder Connection Cable 26
UG B3000 Leaky Feeder Extension Cable 26
i-kon™ III Accessories (Dongle and Keys) 27
Blaster 400 Firing Key 27
Blaster 3000 Dongle Remote (Blue) with Lanyard 27
Blaster 3000 Dongle Master (Red) with Lanyard 27
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 4
General
i-kon™ III Accessories (Training Aids) 28
i-kon™ Dummy Puck 28
EBS Universal dummy puck with a latch on LED. 28
EBS Universal Dummy Puck 28
i-kon™ III Accessories (EBS Cold Weather Warming Pouch (CWWP)) 29
EBS Cold Weather Warming Pouch for Logger I 29
EBS Cold Weather Warming Pouch for Logger II 29
EBS Extension Cable 29
EBS Cold Weather Warming Pouch Spare Battery 30
EBS Cold Weather Warming Pouch Charger 30
i-kon™ III Accessories (EBS Cold Weather Warming Box (CWWB)) 31
EBS Cold Weather Warming Box (CWWB) 31
EBS Cold Weather Warming Box (CWWB-2) 31
EBS Cold Weather Warming Box (CWWB-3) 32
EBS Cold Weather Warming Box (CWWB-4) 32
EBS Cold Weather Warming Box Generator 32
EBS Cold Weather Warming Box Set 33
i-kon™ III Obsolete Hardware & Accessories 34
i-konTM III Logger I 34
i-konTM III Blaster 2400S 34
SAP Code: XB2400S 34
i-konTM III Blaster 2400R with Easy Modem 34
i-konTM III Surface Remote Blasting System (SURBS) with Easy Modem 34
i-konTM III Analogue Telephone Remote Blast Box (RBB) 34
i-konTM III LAN/WLAN Remote Blast Box (RBB) 34
i-konTM III Leaky Feeder Remote Blast Box (RBB) 34
i-konTM III Leaky Feeder Remote Blast Box (RBB) 34
i-konTM III Analogue Telephone Lock Box (LB) 35
i-konTM III LAN/WLAN Lock Box (LB) 35
i-konTM III Leaky Feeder Lock Box (LB) (UHF) 35
i-konTM III Leaky Feeder Lock Box (LB) (VHF) 35
CEBS Analogue Lockbox modem spare 35
Synchronization Cable 35
Spare RBB Phone Cable, Heavy Duty, 10’ 35
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 5
General
Spare RBB Phone Cable, Heavy Duty, 3’ 35
Spare RBB cable to LAN modem 15’ 36
Blaster 2400S Charger Type G 36
SURBS/B2400R Charger 36
CEBS RBB Charger 36
Lockbox/Remote Blast Box Spare Key 36
SURBS Dongle (Black) 36
RBB Smart Dongle (White) 36
Lockbox Master Dongle (Green) 36
Blaster 2400S Firing Key 37
i-konTM LAN/WLAN WIPORT WIFI ANTENNA 37
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 6
General
i-kon™ III System Hardware
i-konTM III Logger II SAP Code: 1007432 (XRELII)
The Logger II is used to register (log) i-kon™ detonators and test the detonator network. When logging a detonator, the Logger stores the detonator ID and the following data:
− Logging in automatic or manual (values or increment) mode: o Position in the order of logging o Delay time
− Logging in delay number mode: o Position in the order of logging o Delay number
− Logging in SHOTPlus mode: o Position in the designed order o Borehole identification o Delay time
− Test functions
− The Logger II measures the current in the detonator network and announces leakage warnings.
− The Logger II tests the responses of the detonators and announces detonator errors.
Logger II unit includes: Description SAP Code
− EBS Multi use Charger 1002637 (XCHGRH)
− EBS Carry Bag Strap 1024229 (XRESTRAP)
− Connection Cable Logger I or II to Blaster 1002635 (XCONCD)
− EBS Logger II Carrying Bag 1010835 (XAC02090)
All included accessories can be purchased separately.
i-konTM III Blaster 400 SAP Code: 1002638 (XB400E)
A hand-held device able to provide the voltage and digital signal required to fire up to 400 detonators via two Loggers I from a safe location. Blaster 400 unit includes: Description SAP Code
− EBS Multi use Charger 1002637 (XCHGRH)
− EBS Carry Bag Strap 1024229 (XRESTRAP)
− Blaster 400 Firing Key 1023204 (XB400DONG)
− Blaster 400 Nylon Carry Bag (Red) 1002600 (XBAGB400) All included accessories can be purchased separately.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 7
General
i-konTM III Blaster 3000 LAN / WLAN SAP Code: 1025093 (XAC02181)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Single frequency of operation
• Multi-functional blaster o Capability to be converted to any Blaster 3000 version after
internal changes are performed by Service Provider
• USB Interface for easy data transfer (firmware, reports)
• Compatible with Logger I and Logger II Blaster 3000 LAN / WLAM unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)
• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)
• Blaster 3000 LAN 16.5' Network Cable 1025271 (XAC02188)
• Blaster 3000 AC Power Supply 1012939 (XREB3000PSII) All included accessories can be purchased separately.
i-konTM III Blaster 3000 SATEL SAP Code: 1012937 (XB3000SATEL)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Repeater capability
• Single frequency of operation
• Multi-functional blaster o Capability to be used as a LAN / WLAN unit
• USB Interface for easy data transfer (firmware, reports)
• Improved RF communication
• Compatible with Logger I and Logger II i-kon™ II Blaster 3000 SATEL has frequency range of 403 to 473 MHz Blaster 3000 unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 XAC02004
• Blaster 3000 Dongle Remote (Blue) 1011998 XAC02005
• EBS Antenna (440-470MHz) 12" TNC 1004137 (XSURBSPRANT)
• B3000 Antenna 90° Elbow 1013309 (XSURBSWST)
• Blaster 3000 AC Power Supply 1012939 XREB3000PSII All included accessories can be purchased separately.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 8
General
i-konTM III Blaster 3000 Analogue Telephone SAP Code: 1025096 (XAC02184)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Single frequency of operation
• Multi-functional blaster o Capability to be used as a LAN / WLAN unit after internal
changes are performed by Service Provider or Field Representative
• USB Interface for easy data transfer (firmware, reports)
• Compatible with Logger I and Logger II Blaster 3000 Analogue Telephone unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)
• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)
• LB & B3000 Analogue Phone Cable 14’ 1013162 (XAPC3M) RJ-11 6P4C Modular Straight Cable9
• Blaster 3000 charger 1012939 (XREB3000PSII) All included accessories can be purchased separately.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 9
General
i-konTM III Blaster 3000 Leaky Feeder UHF SAP Code: 1025095 (XAC02183)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Single frequency of operation
• Multi-functional blaster o Capability to be used as a LAN / WLAN unit
• USB Interface for easy data transfer (firmware, reports)
• Requires HE split port modem to act as router
• Compatible with Logger I and Logger II i-kon™ II Blaster 3000 Leaky Feeder UHF has a frequency range from 380MHz to 520MHz, 12.5 KHz. Blaster 3000 Leaky Feeder UHF unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)
• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)
• B3000 Leaky Feeder Antenna (UHF) 1017691 (XICBSALF)
• B3000 Antenna 90° Elbow 1017617 (XICBSALFH) BNC Connector
• Blaster 3000 AC Power Supply 1012939 (XREB3000PSII) This is used in conjunction with a UG B3000 Head End Modem Leaky Feeder (UHF) All included accessories can be purchased separately.
i-konTM III UG B3000 Head End Modem Leaky Feeder (UHF) SAP Code: 1007349 (XRESPLTUHFRM) (UHF Modem)
This is used in conjunction with a Blaster 3000 Leaky Feeder UHF
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 10
General
i-konTM III Blaster 3000 Leaky Feeder VHF SAP Code: 1025094 (XAC02182)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Single frequency of operation
• Multi-functional blaster o Capability to be used as a LAN / WLAN unit
• USB Interface for easy data transfer (firmware, reports)
• Compatible with Logger I and Logger II i-kon™ II Blaster 3000 Leaky Feeder VHF has a frequency range from 148MHz to 174MHz, 12.5 KHz. Blaster 3000 Leaky Feeder VHF unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)
• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)
• B3000 Leaky Feeder Antenna (VHF) 1006910 (XICBSSALFVHF)
• B3000 Antenna 90° Elbow 1017617 (XICBSALFH) BNC Connector
• Blaster 3000 AC Power Supply 1012939 (XREB3000PSII) This is used in conjunction with a UG B3000 Head End Modem Leaky Feeder (VHF) All included accessories can be purchased separately.
i-konTM III UG B3000 Head End Modem Leaky Feeder (VHF) SAP Code: 1024256 (XREDCBSHMLFNA) (VHF Modem)
This is used in conjunction with a Blaster 3000 Leaky Feeder VHF
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 11
General
i-konTM III Blaster 3000 Moxa SAP Code: 1026709 (XAC02199)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Single frequency of operation
• Multi-functional blaster o Capability to be used as a LAN / WLAN unit
• USB Interface for easy data transfer (firmware, reports)
• Compatible with Logger I and Logger II Blaster 3000 Moxa unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)
• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)
• Blaster 3000 LAN 16.5' Network Cable 1025271 (XAC02188)
• Blaster 3000 AC Power Supply 1012939 (XREB3000PSII) This is used in conjunction with a Leaky Feeder LAN Extender Kit & UG B3000 Head End Modem Leaky Feeder (UHF or VHF) All included accessories can be purchased separately.
i-konTM III Leaky Feeder LAN Extender Kit SAP Code: 1026708 (XAC02198)
This is used in conjunction with a Blaster 3000 Moxa & UG B3000 Head End Modem Leaky Feeder (UHF or VHF) Leaky Feeder LAN Extender Kit unit includes:
− Moxa 5110A-T Serial Ethernet Modem
− Shielded CAT6 Network Cable, Black (6')
− RS-232 Male to Female Cable, Black (6')
− DC Power Plug to Bare-Wires Cable for Moxa 5110A-T Modem
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 12
General
i-konTM III Blaster 3000 LTE M1 SAP Code: 1031834 (XAC02259)
The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:
• Used as a Single Blaster which can fire up to 3000 detonators
• Multiple Remote capability to control up to 6 Remote
• Remote Synchro capability
• Single frequency of operation
• Multi-functional blaster o Capability to be used as a LAN / WLAN unit
• USB Interface for easy data transfer (firmware, reports)
• Compatible with Logger I and Logger II
Frequency (MHz) / (Band)
750 (13)
800 (18-20)
850 (5)
900 (8)
1800 (3)
1900 (2,25)
1700 to 2100 (4,1)
2600 (7)
M1 ✓ ✓ ✓ ✓
✓ ✓
Blaster 3000 LTE unit includes: Description SAP Code
• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)
• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)
• Blaster 3000 AC Power Supply 1012939 (XREB3000PSII) All included accessories can be purchased separately.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 13
General
i-kon™ III Accessories (Cables, Connectors, and Miscellaneous)
SHOTPlus™ Software SHOTPlus™ is blast design and modelling software to optimize every blast. SHOTPlus™ Standard, SHOTPlus™ Premier, SHOTPlus™ UG, and SHOTPlus™ for Tunnels blast design and modelling technologies enable users to design, visualize and analyse blast initiation sequences across surface and underground mining, quarry and construction applications. The highly visual interface makes the program easy to use and provides full Windows® functionality. More information including Software link and Product key, please contact the Blast IQ Team via e-mail at: [email protected]
EBS XS880 SERIAL Converter, USB 2.0 TO RS232 SAP Code: 1006257 (XEBSUSB2RS232)
Serial (RS232) to USB converter has a length of 12in (0.3m) and compatible with:
• Windows 10 32/64
• Windows 7 32/64
• Vista 32/64
• XP 32/64.
EBS Connector Dock SAP Code: 1007132 (XILOGIID)
The EBS Connector Dock is an i-kon™ accessory that can ONLY be used for i-kon™ type connectors. It is a tool for logging the detonator without the need to open the connector (i-kon™ connectors only).
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 14
General
EBS Connection Box for Logger I & Logger II SAP Code: 1013163 (XEBSCB)
The EBS connection box is to connect multiple Loggers I or Logger II to the firing cable. Connect Loggers I or Logger II to the ports 1 to 6. If you have more than 6 Logger I or Logger II, connect another EBS Connection box to the "IN" terminals and Connect the firing cable to the "OUT" terminals. EBS Connection Box unit includes: Description SAP Code
− EBS Banana to Banana Connection 1013070 (XEBSCBC) Cable (Sold separately)
Universal Beep Booster SAP Code: 1002602 (XBEEPP1)
Amplifies the Logger’s & Scanner’s beep for logger/scanner confirmation.
• Works with Logger I
• Works with Logger II (Hardware version 1.5 minimum, and firmware version 1.5.81 or higher)
• Works with eDev™ II Scanner 260 (Hardware version 1.5a minimum, and firmware version 2.11b or higher)
• Works with uni tronic™ 600 Scanner 200 (Hardware version 1.5a minimum, and firmware version 2.11b or higher)
i-kon™ Field Connector 6 SAP Code: 1018762 (XAC02066)
A box of 100 insulation displacement blue connectors to carry signal from the i-kon™ detonator to i-kon™ duplex harness wire.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 15
General
i-kon™ Field Connector 6 with 100g Grease Tube SAP Code: 1020269 (XAC02065)
A box of 100 insulation displacement blue connectors to carry signal from the i-kon™ detonator to i-kon™ duplex harness wire, including a Tube of 100g of Silicone Grease.
EBS Silicone Grease SAP Code: 1013154 (XEBSSTSC444)
100g Tube of T-SC Silicone Grease to insulate the harness wire connection to the Connector 6 IDC Terminals
Copy Cable SAP Code: 1002527 (XCCB)
Cable is used to copy data contained on one Logger I to another Logger I and has a length of 39in (1m). (Previously used to set-up frequency synchronization between a Blaster 2400R and a Surface Remote Blasting Box.)
“To be used with i-konTM Logger I only”
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 16
General
Download Cable SAP Code: 1002528 (XDCA) 3.25ft (1m), Type A 1020374 (XDCA6) 6ft (1.83m)
Cables used for data transfer between the Logger I and Orica SHOTPlus™-i program, which downloads reports from Loggers I and Blast Boxes to a computer.
“Not compatible with Blaster 3000”
Stethoscope Cable SAP Code: 1012548 (XSTETHCBLII)
This 16in (0.4m) cable allows for quick connection between i-kon™ Logger I or Logger II and i-kon™ harness wire for trouble shooting.
Connection Cable Logger I or II to Blaster SAP Code: 1002635 (XCONCD)
Spare connection cable from Logger I or Logger II to the blasting equipment with a length of 39in (1m).
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 17
General
90° Connection Cable Logger I or II to Blaster SAP Code: 1011548 (XCONCDII90)
Spare connection cable from Logger I or Logger II to the blasting equipment with a length of 39in (1m).
EBS Banana Plug to Alligator Clip Test Lead SAP Code: 1020395 (XEBSBPACTL)
A useful tool, when attached to a Logger I or Logger II, that can be attached easily to exposed copper wires on blast lines, firing lines, or harness wires, to test for leakage, errors, or extraneous voltage. The cable is 36in (0.9m) long and used for eDevTM II Scanner 260, OseisTM Tester III, and uni tronicTM 600 Scanner 200.
EBS Banana to Banana Connection Cable SAP Code: 1013070 (XEBSCBC)
EBS Banana to Banana Connection Cable used to connect an eDev II Blast Box 610c with a i-kon II Blaster 3000 with a length of 36in (0.9m). Also, used injunction with EBS Connection Box for Logger I and Logger II (1013163 [XEBSCB]).
Logger I or II to Splice Cable SAP Code: 1012537 (XRELSCII)
39in (1m) Splice Cable. Allows you to use harness wire to quickly connect multiple Loggers to a blast line or Blaster 3000 in parallel setup.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 18
General
Spare B3000 Analogue Phone Cable SAP Code: 1013162 (XAPC3M)
Cable, 14ft (4.3m) - RJ-11 6P4C Modular Straight Cable. (Previously for LB)
Blaster 3000 LAN Network Cable SAP Code: 1025271 (XAC02188)
Cable, 16.5ft (5m) LAN Network Cable
Spare B3000 Cable to LAN Modem SAP Code: 1013023 (XCAT5ENC)
CAT5E Network Cable, 10ft (3m) Cat5e, 350Mhz, Snag less Patch Cable, White (Previously for LB)
EBS Multi Use Charger SAP Code: 1002637 (XCHGRH)
Charger, output 12V DC/1.25A, input 100-240V AC, 72in (1.8m) cable length. Used with Logger I, Logger II, and Blaster 400. Also used for eDevTM II Scanner 260, OseisTM Shooter II & Tester III, and uni tronicTM 600 Scanner 200.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 19
General
EBS Multi Use Vehicle Charger SAP Code: 1024252 (XVCHGR400)
Vehicle charger cable to charge Logger I, Logger II, and Blasters 400 has a 72in (1.8m) cable length. Also used for eDevTM II Scanner 260, OseisTM Shooter II & Tester III, and uni tronicTM 600 Scanner 200.
Blaster 3000 AC Power Supply SAP Code: 1012939 (XREB3000PSII)
Spare Blaster 3000 AC Power Supply with length of 40in (1m)
i-kon™ 2.2 KΩ Resistor SAP Code: 1012966 (X2K2BLTII)
Cable length 12in (0.3m)
EBS Protective Cable End CAP SAP Code: 1012506 (XEBSPCEC)
End Cap to protect binding connector for all EBS cables.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 20
General
UG B3000 Cap Antenna Socket SAP Code: 1013305 (XSURBSAKA)
Cap antenna socket to protect the Blaster 3000 antenna port.
i-kon™ Charging Port Connector Cap for B3000 SAP Code: 1020240 (XAC02030)
(Previously for RBB)
EBS Equipment Binder Cap SAP Code: 1007305 (XEBSIOEBC)
Binder cap to protect the binder Logger I & Blaster400 connector. Also works with:
− i-konTM Blaster 3000s
− i-konTM Logger II
− eDevTM II Scanner 260
− eDevTM II Belt Tester (RDI) (No Longer Supported)
− uni tronicTM 600 Scanner 200
− uni tronicTM 600 Belt Tester (RDI) (No Longer Supported)
− oseisTM Tester III
EBS Wire Deployment Tool SAP Code: 1020298 (XEBSWDT)
The wire deployment tool is to be used by blasters for wire deployment of EBS products on spools. The tool consists of a durable aluminum tube with ergonomic handle, attached to a retractable belt clip. The wire deployment tool is intended to be a portable and easy to use alternative to the wooden rod found in each case of i-kon™ product on spools. The tool will provide an improved wire deployment experience that blasters will love to use.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 21
General
EBS Carry Bag Strap SAP Code: 1024229 (XRESTRAP)
A spare strap to be used with: eDev™ II Scanner 260, i-kon™ II Logger, i-kon™ II Logger II, i-kon™ II Blaster400, oseis™ Tester III, oseis™ Shooter II, and uni tronic™ Scanner 200.
EBS Sling Bag SAP Code: 1012568 (XREOBAGWP)
A specially designed Yellow Sling Bag with a side Pocket to assist deployment of the EBS system at the face or on bench. Designed to deploy a single reel of the draw-from-center harness wire. Side pocket can be used to carry accessories, tools and/or equipment.
Logger I Nylon Carry Bag (Blue) SAP Code: 1002601 (XBAGLOG)
A specially designed carry bag with strap to keep Logger I dry and free from dust and grease.
Blaster 400 Nylon Carry Bag (Red) SAP Code: 1002600 (XBAGB400)
A specially designed carry bag with strap to assist keeping Blaster dry and free from dust and grease.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 22
General
EBS Scanner 200/260, Logger II, & Tester III Bag SAP Code: 1007022 (XEBSSCN2XXB)
Water resistance carrying bag for uni tronic™ Scanner 200, eDev™ Scanner 260, oseis™ Tester III, and i-kon™ Logger II.
EBS Shoulder Harness SAP Code: 1010833 (XAC02088)
A specially designed adjustable shoulder harness.
EBS Logger II Carrying Bag SAP Code: 1010835 (XAC02090)
A specially designed carry bag with strap to keep Logger II dry and free from dust and grease. This carry bag can be used with the EBS Shoulder Harness or by itself. - Including Neck Sling
EBS Black Right Sling Bag SAP Code: 1010836 (XAC02091)
A specially designed black Sling Bag for the right hip. Designed to deploy a single reel of the “draw-from-center” harness wire at the face or on bench. Includes a second pocket that can be used to carry accessories and tools.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 23
General
EBS Black Left Sling Bag SAP Code: 1010837 (XAC02092)
A specially designed black Sling Bag for the left hip. Designed to deploy a single reel of the “draw-from-center” harness wire at the face or on bench. Includes a second pocket that can be used to carry accessories and tools.
EBS Cargo Sling SAP Code: 1010834 (XAC02089)
Help to carry a Box
EBS Harness System The EBS Harness System is composed of the following items:
Description SAP Code EBS Shoulder Harness 1010833 (XAC02088) EBS Logger II Carrying Bag 1010835 (XAC02090) EBS Black Right Sling Bag 1010836 (XAC02091) EBS Black Left Sling Bag 1010837 (XAC02092) EBS Cargo Sling 1010834 (XAC02089)
EBS Antenna 90° TNC Elbow SAP Code: 1013309 (XSURBSWST)
An antenna 90° elbow to TNC connect the B3000 antenna to the side of the blast box. (Previously for SURBB)
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 24
General
EBS Antenna (440-470MHz) TNC SAP Code: 1004137 (XSURBSPRANT)
A spare 12in (0.3m) Surface antenna for i-kon™ Blaster 3000. (Previously for i-kon™ SURBB and i-kon™ Blaster 2400R)
EBS TNC Magnetic Mobile Antenna Base SAP Code: 1024313 (XRTNCMMAB)
Magnetic Antenna Base for Surface & 12ft (3.6m) cable. This can be used with:
• I-konTM II Blaster 3000 SATEL Note: antenna is ordered separately.
UG B3000 Leaky Feeder Antenna (VHF) SAP Code: 1006910 (XICBSSALFVHF)
VHF stubby antenna attaches to the B3000 equipment with the elbow. (Previously for CEBS) The antenna must be cut to the right length to function at desired frequency as per manufacture instructions included with antenna.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 25
General
UG B3000 Leaky Feeder Antenna (UHF) SAP Code: 1017691 (XICBSALF)
UHF stubby antenna attaches to the B3000 equipment with the elbow. (Previously for CEBS) The antenna must be cut to the right length to function at desired frequency as per manufacture instructions included with antenna.
EBS Leaky Feeder Antenna 90* BNC Elbow SAP Code: 1017617 (XICBSALFH)
An antenna 90° elbow to BNC connect the B3000 antenna to the side of the blast box. (Previously for RBB LF)
UG B3000 Leaky Feeder Antenna SAP Code: 1007443 (XLFSMA)
A portable antenna used in the B3000. Leaky Feeder Std Metal Antenna attaches to the Magnetic Base below (SAP# XLFDPAMB). (Previously for CEBS) The antenna must be cut to the right length to function at desired VHF or UHF frequency as per manufacture instructions included with antenna.
UG B3000 Leaky Feeder Antenna Magnetic Base SAP Code: 1007077 (XLFDPAMB)
A leaky feeder antenna Magnetic Base used in the B3000. (Previously for CEBS) Leaky Feeder Antenna Magnetic Base comes with 10ft (3m) cable and male BNC connector.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 26
General
UG B3000 Leaky Feeder Connection Cable SAP Code: 1007131 (XLFDPCA)
A Leaky Feeder Cable used in the B3000. (Previously for CEBS) Leaky Feeder 5ft (1.5m) Cable with M/M BNC Connector. (From Head End Modem to Head End monitor cabinet)
UG B3000 Leaky Feeder Extension Cable SAP Code: 1007444 (XLFDPC)
A Cable used in the B3000. (Previously for CEBS) Leaky Feeder 34ft (10.4m) Cable with M/F connector. (From B3000 to Magnetic Antenna)
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 27
General
i-kon™ III Accessories (Dongle and Keys)
Blaster 400 Firing Key SAP Code: 1023204 (XB400DONG)
Firing key required to activate communications and initiate the blasting sequence when using the Blaster 400. Note: A Blaster 400 key has a black cap
Blaster 3000 Dongle Remote (Blue) with Lanyard SAP Code: 1011998 (XAC02005)
Remote Dongles are marked with a blue belt and record access data on Remote Blasters. You cannot fire a blast with a blue Remote Dongle.
Blaster 3000 Dongle Master (Red) with Lanyard SAP Code: 1011997 (XAC02004)
The red marked Master Dongle is needed to control the blasting sequence and to fire the blast.
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 28
General
i-kon™ III Accessories (Training Aids)
i-kon™ Dummy Puck SAP Code: 1007359 (XPUCKDUMMYII) (20cm) 1007111 (XPUCKIIHIGH) (20cm High leakage) (4.8 – 4.9mA) 1007119 (XPUCKIILOW) (20cm Low leakage) (1.4 – 1.5mA)
Dummy i-kon™ detonator series display used for training purposes.
EBS Universal dummy puck with a latch on LED. SAP Code: 1013094 (XPUCKDUMMYLED)
This universal dummy puck has features including a latching “fired” indication, an automatic LED reset after a period of 1 hour to save battery power, plus a pushbutton for resetting the “fired” indication. It can be used as a i-kon™, uni tronicTM 600, eDevTM II and oseisTM training puck. A replaceable lithium battery providing 150 hours of continuous LED operation.
EBS Universal Dummy Puck SAP Code: 1013086 (XEBSPUCKDUMMY)
This universal dummy puck is a basic dummy puck that can be used as a i-kon™ II, uni tronic™ 600, eDev™ II and oseis™ II training puck.
Note: Universal Dummy Puck and i-kon Dummy Puck cannot be mixed when logging
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 29
General
i-kon™ III Accessories (EBS Cold Weather Warming Pouch (CWWP))
EBS Cold Weather Warming Pouch for Logger I SAP Code:1013130 (XEBSCWWP1)
The Cold Weather Warming Pouch (CWWP-1), is designed to contain a Logger I, Tester, B400, Shooter II or RDI tester and keep it at a reliable operating temperature in sub-zero conditions. It is designed so they can be operated while still inside the CWWP-1. The heater in the pouch is powered by a rechargeable 12VDC battery. Connections are made via sealed locking connectors.
EBS Cold Weather Warming Pouch for Logger I unit includes: Description SAP Code
− EBS Cold Weather Warming Pouch XEBSCWWPSB Spare Battery
− EBS Cold Weather Warming Pouch XEBSCWWPC Charger
+
EBS Cold Weather Warming Pouch for Logger II SAP Code: 1013131 (XEBSCWWP2)
The Cold Weather Warming Pouch (CWWP-2), is designed to contain a Logger II, Tester III, Scanner 260 or Scanner 200 and keep it at a reliable operating temperature in sub-zero conditions. It is designed so they can be operated while still inside the pouch. The heater in the pouch is powered by a rechargeable 12VDC battery. Connections are made via sealed locking connectors. EBS Cold Weather Warming Pouch for Logger II unit includes: Description SAP Code
− EBS Cold Weather Warming Pouch XEBSCWWPSB Spare Battery
− EBS Cold Weather Warming Pouch XEBSCWWPC Charger
The following Ext Cable must be ordered to complete The Cold Weather Warming Pouch Kit for Logger II.
________________________________________________________
EBS Extension Cable
SAP Code: 1010827 (XAC02082)
90° Banana plugs to EBS Connector with length of 24in (0.6m)
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 30
General
EBS Cold Weather Warming Pouch Spare Battery SAP Code: 1013044 (XEBSCWWPSB)
Spare rechargeable 12VDC battery
EBS Cold Weather Warming Pouch Charger SAP Code: 1013132 (XEBSCWWPC)
Spare battery 12VDC charger
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 31
General
i-kon™ III Accessories (EBS Cold Weather Warming Box (CWWB))
EBS Cold Weather Warming Box (CWWB) SAP Code: 1013027 (XEBSCWWB)
For SURBBS & (12x) Logger I The Cold Weather Warming Box (CWWB), is designed to contain a SURBB and a full complement of 12 loggers I and keep them at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors. (Pelican Case 1690 Dimension W: 33.36in (847mm) H: 18.23in (463mm) D: 28.44in (722mm))
EBS Cold Weather Warming Box (CWWB-2) SAP Code: 1013127 (XEBSCWWB2)
For Blaster 3000 The Cold Weather Warming Box (CWWB-2), is designed to contain a B3000 and keep it at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors. (Pelican Case 1610 Dimension W: 24.83in (630mm) H: 11.88in (300mm) D: 19.69in (500mm))
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 32
General
EBS Cold Weather Warming Box (CWWB-3) SAP Code: 1013128 (XEBSCWWB3)
For (12x) Logger I The Cold Weather Warming Box (CWWB-3), is designed to contain a full complement of 12 logger I’s and keep them at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors.
(Pelican Case 1610 Dimension W: 24.83in (630mm) H: 11.88in (300mm) D: 19.69in (500mm))
EBS Cold Weather Warming Box (CWWB-4) SAP Code: 1013129 (XEBSCWWB4)
For (5x) Logger II The Cold Weather Warming Box (CWWB-4), is designed to contain a full complement of 5 logger II’s and keep them at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors.
(Pelican Case 1600 Dimension W: 24.25in (616mm) H: 8.68in (220mm) D: 19.43in (494mm))
EBS Cold Weather Warming Box Generator SAP Code: Ask for SAP Code (XEBSCWWBG)
For CWWB, CWWB-2, CWWB-3 & CWWB-4
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 33
General
EBS Cold Weather Warming Box Set Including the following items
• EBS Cold Weather Warming Box (CWWB-2)
o SAP Code: 1013127 (XEBSCWWB2)
• EBS Cold Weather Warming Box (CWWB-4)
o SAP Code: 1013129 (XEBSCWWB4)
• EBS Cold Weather Warming Box Generator
o SAP Code: Ask for SAP Code (XEBSCWWBG)
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 34
General
i-kon™ III Obsolete Hardware & Accessories
i-konTM III Logger I SAP Code: 1002530 (XREL)
i-konTM III Blaster 2400S SAP Code: XB2400S
i-konTM III Blaster 2400R with Easy Modem SAP Code: XREB2400REM
i-konTM III Surface Remote Blasting System (SURBS) with Easy Modem SAP Code: XRESURBBEM
i-konTM III Analogue Telephone Remote Blast Box (RBB) SAP Code: XREDCBSR
i-konTM III LAN/WLAN Remote Blast Box (RBB) SAP Code: XREDCBSRLW
i-konTM III Leaky Feeder Remote Blast Box (RBB) SAP Code: XREDCBSRLFUHFNA (UHF Modem)
i-konTM III Leaky Feeder Remote Blast Box (RBB) SAP Code: XREDCBSRLFNA (VHF Modem)
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 35
General
i-konTM III Analogue Telephone Lock Box (LB) SAP Code: XREDCBSL
i-konTM III LAN/WLAN Lock Box (LB) SAP Code: XREDCBSLLW
i-konTM III Leaky Feeder Lock Box (LB) (UHF) SAP Code: XREDCBSLLFUHF (UHF Modem)
i-konTM III Leaky Feeder Lock Box (LB) (VHF) SAP Code: XREDCBSLLF (VHF Modem)
CEBS Analogue Lockbox modem spare SAP Code: XREDCBSM
Synchronization Cable SAP Code: XSYNCF
Spare RBB Phone Cable, Heavy Duty, 10’ SAP Code: XRBBXCBL
Spare RBB Phone Cable, Heavy Duty, 3’ SAP Code: XRBBXCBLS
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 36
General
Spare RBB cable to LAN modem 15’ SAP Code: XREDCBSRLWCBL
Blaster 2400S Charger Type G SAP Code: XCHGRG
SURBS/B2400R Charger SAP Code: XCHGRSURBB
CEBS RBB Charger SAP Code: XCHGRRBB
Lockbox/Remote Blast Box Spare Key SAP Code: XCEBSKEY
SURBS Dongle (Black) SAP Code: XSURBS
RBB Smart Dongle (White) SAP Code: XRBBSPRDGL
Lockbox Master Dongle (Green) SAP Code: XCBSSMSTRDI
i-kon™ III Electronic Blasting System | Product Catalog | May 2021 37
General
Blaster 2400S Firing Key SAP Code: XB2400SKEY
i-konTM LAN/WLAN WIPORT WIFI ANTENNA SAP Code: XRBBLWLA
Please note that the images in this catalogue are not to scale.
For further information on the full range of Orica’s Electronic Blasting Systems please visit our website
www.oricaminingservices.com or contact your local Orica Representative.
1 Nicholson Street, East Melbourne, Victoria, Australia.
© 2016 Orica Group. All rights reserved. All information contained in this document is provided for informational purposes only and is subject to change without notice. Since the Orica Group cannot anticipate or control the conditions under which this information and its products may be used, each user should review the information in the specific context of the intended application. To the maximum extent permitted by law, the Orica Group specifically disclaims all warranties express or implied in law, including accuracy, non-infringement, and implied warranties of merchantability or fitness for a particular purpose. The Orica Group specifically disclaims, and will not be responsible for, any liability or damages resulting from the use or reliance upon the information in this document.
The word Orica and the Ring device are trademarks of the Orica Group.