Varies - See Table

Varies - See Table

min. 50mm recommended 100mm

(allowing tolerance)

Rails tpyically @ 1167mm

32

Please refer to the technical note: Installer guidance for quilt insulation in Elite Wall Systems

Refer to Technical for advice on constructions requiring better U values than those shown.

Please Note:

System is fire rated using Knauf Factoryclad 40 ECOSE insulation of minimum thickness 80mm with steel outer sheet only, to achieve 120 minutes Integrity, 15 minutes

(min) Insulation which meets the requirements of Building Regulations Part B for external walls where fire attack is from inside the building and the wall is 1M or more

from the boundary.

System can be fire rated using Rockwool insulation of minimum thickness 120mm with steel outer sheet only, with liner stitched at 300mm centres, to achieve 120

minutes Integrity, 30 minutes (min) Insulation.

Ensure roll edges are lapped/butted to ensure no gaps.

*

*

*Fixings with an asterix are required on sheet ends and end laps only.

Elite System 55

Bracket Height

Insulation

Thickness

Insulation Value

Overall System

Depth

U Value at 1.5M

Centres

120mm

140mm

160mm

180mm

200mm

220mm

120mm

140mm

160mm

180mm

200mm

220mm

0.36

0.31

0.27

0.24

0.22

0.20

100mm 100mm 0.040 0.43

0.040

0.040

0.040

0.040

0.040

0.040

153mm

173mm

193mm

213mm

233mm

253mm

133mm

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

1 of 15

ELITE SYSTEM 55 SIDE LAP DETAIL

ELITE SYSTEM 55 END LAP DETAIL

Euroclad EC 19-167-1000

Liner 0.4mm Steel

50mm x 1mm butyl sealing tape

Quattro Bar & Bracket to required

depth rail typically @ 1167mm centres

Fixings in every trough at intermediate

supports, sheet ends and end laps

Quattro Bar & Bracket to required

depth rail typically @ 1167mm centres

4mm Bead class A

butyl sealant

Euroclad EC 19-167-1000

Liner 0.4mm Steel

COLOUR SIDE

min. 50mm recommended 100mm

(allowing tolerance)

9 x 3 mastic sealant

COLOUR SIDE

Please Note:

System is fire rated using Knauf Factoryclad 40 ECOSE insulation of minimum thickness

80mm with steel outer sheet only, to achieve 120 minutes Integrity, 15 minutes (min)

Insulation which meets the requirements of Building Regulations Part B for external walls

where fire attack is from inside the building and the wall is 1M or more from the boundary.

System can be fire rated using Rockwool insulation of minimum thickness 120mm with

steel outer sheet only, with liner stitched at 300mm centres, to achieve 120 minutes

Integrity, 30 minutes (min) Insulation.

Ensure roll edges are lapped/butted to ensure no gaps.

Min 60

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

Euroclad EC 19-167-1000 Liner

19_2L 0.4mm Steel Side lap

Euroclad EC 32-167-1000

Wall 32_6Rev

0.5mm steel Side lap

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

2 of 15

23

94

1

2

9

°

73

32

167 2321

3

9

5

3

9

1000

COLOUR SIDE

COLOUR SIDE

COLOUR SIDE

COLOUR SIDE

167167

104

19

R

4

22

2

8

1

3

7

°

1

0

1000

18

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

EUROCLAD EC 32-167-1000 Wall 32_6Rev 0.5mm

EXTERNAL SHEET

EUROCLAD EC 19-167-1000 Liner 19_2L 0.4mm

LINER

3 of 15

40

Brackets less than 260mm require

2 fixings diagonally opposite.

Brackets 260mm or more require

4 fixings.

< 260mm

≥ 260mm

40

33

34

60

59

VARIES D

EPEN

DIN

G

ON

BRACKET H

EIG

HT

VARIES D

EPEN

DIN

G

ON

BRACKET H

EIG

HT

SIDE ELEVATION

Maximum bar cantilever at free

ends is 300mm.

Spigot can fall anywhere between

two brackets.

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

4 of 15

Class A Butyl Sealant to thickness

required to provide adequate air

sealing to masonry wall.

Profile Filler

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Liner flashing sealed to masonry

Class A Butyl Sealant to thickness

required to provide adequate air

sealing to masonry wall.

Quattro bracket to required depth

rail typically @ 1167mm centres

Quattro Spacer Rail

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

5 of 15

Quattro bracket to required depth

rail typically @ 1167mm centres

Fixings in all troughs on intermediate

supports, sheet ends and end laps

9x3mm Mastic Sealant

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Internal Flashing fixed and sealed

to internal elements

9x3mm Mastic Sealant

Door detail by others

External Flashing

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Timber Packer

Sealant

Profile Filler

Flashing stitched at

300mm - 450mm centres

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

6 of 15

Profile Filler

External flashing

Quattro bracket to required depth

rail typically @ 1167mm centres

Quattro Bar & Bracket to required

depth typically @ 1.2m centres

Euroclad EC 19-167-1000 Liner 0.4mm Steel

Quattro Spacer Rail

Internal flashing fixed and sealed to liner

to provide air tightness and vapour control

Euroclad EC 19-167-1000 Liner 0.4mm Steel

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

9x3mm Mastic Sealant

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

7 of 15

Euroclad EC 19-167-1000 Liner 0.4mm Steel

Drip Flashing

Drainage Point

Quattro bracket to required depth

rail typically @ 1167mm centres

Large amount of sealant to make

allowance for imperfection in concrete and

ensure good airtightness. Seal may be achieved

at flashing or structural element such as ring beam,

depending on project specific details.

Profile Filler

Internal Flashing

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

8 of 15

Quattro Spacer Rail

Quattro bracket to required depth

rail typically @ 1167mm centres

Internal flashing fixed and sealed to liner

to provide air tightness and vapour control

9x3mm Mastic Sealant

Euroclad EC 19-167-1000

Liner 0.4mm Steel

External Flashing

9x3mm Mastic Sealant

Quattro bracket to required depth

rail typically @ 1167mm centres

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

9 of 15

150

Large amount of sealant to make

allowance for imperfection in concrete and

ensure good airtightness. Seal may be achieved

at flashing or structural element such as ring beam,

depending on project specific details.

Closure Flashing

Quattro bracket to required depth

rail typically @ 1167mm centres

Closure Flashing

Profile Filler

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Drip Flashing stitched at max 450mm centres

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

10 of 15

Quattro bracket to required depth

rail typically @ 1167mm centres

Fixings in all troughs on intermediate

supports, sheet ends and end laps

9x3mm Mastic Sealant

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Internal Flashing fixed and sealed

to internal elements

9x3mm Mastic Sealant

Vehicle Access Door Detail by others

External Flashing

Timber Packer

Sealant

Profile Filler

Flashing stitched at approx 300 - 400mm centres

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

11 of 15

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

40

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

Profile Filler

Sealant

Drip Flashing

Closure Flashing

Liner Flashing fillers fixed and sealed to liners to

provide air tightness and vapour control

Quattro bracket to required depth

rail typically @ 1167mm centres

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Timber Packing

Vehicle Access Door Detail by others

Internal Flashing fixed and sealed

to internal elements

9x3mm Mastic Sealant

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

12 of 15

40

Liner Flashing fillers fixed and sealed to liners to

provide air tightness and vapour control

Window Detail by others

Internal Flashing fixed and sealed

to internal elements

Sealant

Timber Packer

Quattro bracket to required depth

rail typically @ 1167mm centres

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Sealant

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

13 of 15

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

40

Internal Flashing fixed and sealed

to internal elements

Quattro bracket to required depth

rail typically @ 1167mm centres

Euroclad EC 19-167-1000 Liner 0.4mm Steel

Timber Packing

Window Detail by others

Profile Filler

Sealant

Drip Flashing

Closure Flashing

Liner Flashing fillers fixed and sealed to liners to

provide air tightness and vapour control

Sealant

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

14 of 15

Quattro bracket to required depth

rail typically @ 1167mm centres

Fixings in all troughs on intermediate

supports, sheet ends and end laps

9x3mm Mastic Sealant

Euroclad EC 19-167-1000

Liner 0.4mm Steel

Internal Flashing fixed and sealed

to internal elements

9x3mm Mastic Sealant

Window detail by others

External Flashing

Timber Packer

Sealant

Profile Filler

Flashing stitched at approx 300 - 400mm centres

EUROCLAD ELITE SYSTEM 55 WALL CONSTRUCTION

Insulation excluded for clarity

A range of mineral & glass wool insulations are available for different requirements

Euroclad EC 32-167-1000

Wall 32_6Rev 0.7mm steel

TITLE: Elite System 55

DWG NO: E55

DRAWN: CD

DATE: Jan 2020

CHECK: MP

SCALE: NTS

ELITE SYSTEMS

To be read in conjunction with

Elite System specification

documents

This draft drawing has been

supplied by Euroclad Group Ltd

for the purpose of guidance free

of charge. It is a suggested

typical detail and as such should

not be assumed suitable for any

specific project or application.

No responsibility is assumed for

errors or misinterpretations

resulting from the information

contained in the drawing. Details

are for illustration only and no

liability is accepted. We reserve

the right to change the details

without notice.The drawing is

copyright, it remains our

property.

Fax: +44 (0)2922 010 122

www.euroclad.com

Tel: +44 (0)2922 010 101

15 of 15