elwe separation sleeve technical datasheet
DESCRIPTION
The Evolution Oil Tools ELWE Separation Sleeve is used to isolate the ports in various Evolution Sliding Sleeves, such as EL, SLFU, SLFD, NEFU, and NEFD. Installed, it effectively isolates the tubing from the casing, regardless of whether the Sliding Sleeve is open or closed.TRANSCRIPT
-
This document is uncontrolled when printed. 2015 Evolution Oil Tools Inc. All rights reserved. www.eotools.com Toll Free: 1-800-265-TOOL
ELWE_Separation_Sleeve_TDS (ELWE Separation Sleeve) REV A
March 2015 Flow Control
ELWE Separation Sleeve Straddles and packs off above and below the flow ports
Applications Blanking off the ports in a sliding sleeve
Shutting off flow from the casing zone
Allowing flow from a lower zone
Features & Benefits Straddles and packs off above and below
flow ports
Allows flow from the lower zone up through
the middle of the tool
Pressure is equalized by breaking the
equalization plug
Description The Evolution Oil Tools ELWE Separation Sleeve is
used to isolate the ports in various Evolution Sliding
Sleeves, such as EL, SLFU, SLFD, NEFU, and NEFD.
Installed, it effectively isolates the tubing from the
casing, regardless of whether the Sliding Sleeve is open
or closed.
Operation
Running The ELWE is run using an EC-1 Running Tool. It is run
downhole until the no-go shoulder on the ELWE locates
above the upper seal bore of a Sliding Sleeve. The
trailing dogs in the ELWE expand into the locking profile
in a Sliding Sleeve, securing the ELWE Separation Sleeve
in place. Downward jarring shears pins in the Running
Tool, releasing it from the Separation Sleeve.
Pulling To pull an ELWE, run in with a model EA Guide and an EA
Equalizing Prong down onto the Separation Sleeve. The
Equalizing Prong will break off an equalizing plug inside
the bore of the Separation Sleeve, allowing equalization
to begin. Retrieve the EA Guide/EA Equalizing Prong to
surface, and when equalized, then run back downhole
again with an ERB Pulling Tool having an attached EB
probe.
This will latch onto the fishneck of the ELWE Lock
Mandrel while simultaneously collapsing the locking
dogs, releasing the Separation Sleeve to be retrieved
from the well.
http://www.eotools.com/http://www.eotools.com/index.php/component/virtuemart/207/13/flow-control/sliding-sleeves/slfuslidingsleeve-detail.htmlhttp://www.eotools.com/index.php/component/virtuemart/107/24/flow-control/running-pulling-and-shifting-tools/ec-1-running-tool-detail.html
-
ELWE Separation Sleeve
www.eotools.com
Item
# Description Qty
1 Lock Mandrel 1
2 Locking Dog 2
3 Lock Pin 2
4 End Adapter Ring 4
5 Vee Seal 12
6 Center Adapter 2
7 Equalizing Plug 1
8 Central Mandrel 1
9 Packing Mandrel 1
-
This document is uncontrolled when printed. 2015 Evolution Oil Tools Inc. All rights reserved. www.eotools.com Toll Free: 1-800-265-TOOL
ELWE_Separation_Sleeve_TDS (ELWE Separation Sleeve) REV A
March 2015 Flow Control
CANADA #3, 1820 30th Ave NE
Calgary, Alberta T2E 7M5
Toll Free: 1-800-265-TOOL (8665)
Main: 403-243-1442
Fax: 403-258-2614
6415A - 63 St. Close
Lloydminster, Alberta T9V 3B5
Tel: 780-522-8294
Fax: 780-875-6337
4512 81 Ave
Edmonton, Alberta
Tel: 587-758-9091
Cell: 780-919-1722
Cell: 780-893-1019
UNITED STATES OF AMERICA P.O. Box 5363
2908 Coffey Street
Victoria, Texas 77903
Main: 361-575-7900
Fax: 361-575-8081
2400 Kermit Hwy
Odessa, Texas 79764
Cell: 432-638-7902
www.eotools.com
http://www.eotools.com/
ELWE Separation SleeveDescriptionApplicationsFeatures & BenefitsOperationRunningPulling
UNITED STATES OF AMERICACANADA