8/3/2019 Embeeded Sep

1/20

EMBEEDED SEP

WADE-8056/WADE-8556Presented

ByS.PREETHI

08011012104

FIANL CSE-A

8/3/2019 Embeeded Sep

2/20

INTRODUCTION

Port well Inc., a world-leading innovator in theIndustrial PC (IPC) market and a

member of the Intel Communications Alliance,has launched its new WADE-8056 in

response to market demand for a simplifiedembedded system board (ESB) that

combines robust computing power, a smaller

footprint and lower power consumption with increased product longevity.

The WADE-8056 Mini-ITX ESB

8/3/2019 Embeeded Sep

3/20

Hardware Configuration

This chapter indicates jumpers, headers andconnectors locations. Users may find

useful information related to hardware settingsin this chapter. The default settings

are indicated with a star sign ().

8/3/2019 Embeeded Sep

4/20

Jumper Setting

In the following sections, Short means coveringa jumper cap over jumper pins; Open

or N/C (Not Connected) means removing ajumper cap from jumper pins. Users can

.

8/3/2019 Embeeded Sep

5/20

WADE-8056 Jumper andConnector Locations

8/3/2019 Embeeded Sep

6/20

Grading

8/3/2019 Embeeded Sep

7/20

Connector Allocation

8/3/2019 Embeeded Sep

8/20

8/3/2019 Embeeded Sep

9/20

8/3/2019 Embeeded Sep

10/20

8/3/2019 Embeeded Sep

11/20

System Installation

3.1 Intel LGA 775 Processor

Installing LGA775 CPU

1) Lift the handling lever of CPU socketoutwards and upwards to the other end.

Following step A position to step B position.

8/3/2019 Embeeded Sep

12/20

Step 2

2) Align the processor pins with pinholes on thesocket. Make sure that the notched corner ordot mark (pin 1) of the CPU corresponds to thesockets bevel end. Then

press the CPU gently until it fits into place (seeIf this operation is not easy

or smooth, dont do it forcibly. You need to

check and rebuild the CPU pin

uniformly

8/3/2019 Embeeded Sep

13/20

setup

8/3/2019 Embeeded Sep

14/20

Removing CPU

1) Unlock the cooling fan first. 2) Lift the lever of CPU socket outwards and

upwards to the other end.

3) Carefully lifts up the existing CPU to removeit from the socket.

4) Follow the steps of installing a CPU tochange to another one or place handling bar

to close the opened socket.

8/3/2019 Embeeded Sep

15/20

Configuring System Bus

WADE-8056 will automatically detect the CPUused. CPU speed of Intel P4 /Celeron

D can be detected automatically.

I t lli th Si l B d

8/3/2019 Embeeded Sep

16/20

Installing the Single BoardComputer

To install your WADE-8056 & 8556 intostandard chassis or proprietary environment,

please perform the following:

Step 1 : Check all jumpers setting on properposition

Step 2 : Install and configure CPU and memorymodule on right position

Step 3 : Place WADE-8056 into the dedicatedposition in the system

Step 4 : Attach cables to existing peripheraldevices and secure it

8/3/2019 Embeeded Sep

17/20

WARNING

Please ensure that SBC is properly insertedand fixed by mechanism.

Note:

Please refer to section 3.3.1 to 3.3.4 to installINF/VGA/LAN/Audio drivers.

8/3/2019 Embeeded Sep

18/20

8/3/2019 Embeeded Sep

19/20

.

8/3/2019 Embeeded Sep

20/20