emission control for engine test facilities · 2019. 7. 24. · emissions from engine test...
TRANSCRIPT
combikat™
A FAURECIA COMPANY
EMISSION CONTROL FOR ENGINE TEST FACILITIES
MORE DETAILS: CIMAC CONGRESS 2019 PAPER NO. 455
TRUST OUR KNOWLEDGE AND MAKE SURE YOU COMPLY WITH THE EMISSION LIMITS!
ECONOMIC & EMISSION COMPLIANT TEST CENTER OPERATION
We reserve the right to make technical modifications and improvements. The details provided are not legally binding and do not represent guaranteed proper-ties. Any claims for compensation on the basis of this information will not be recognised. No liability in the case of printing errors.
Hug Engineering AG | Im Geren 14 | CH- 8352 Elsau | Switzerland | Tel. +41 (0)52 368 20 20 | Fax +41 (0)52 368 20 10
[email protected] | www.hug-engineering.com
Emissions from engine test facilities are incre-asingly under attention by authorities and the public, often as residential areas spread out into former industrial areas.
Hug Engineering already supplied numerous custom-built emission control facilities for engine test centers during the last two decades.
These installations enable engine manufactu-rers- and designers to test their engines while
being compliant with local rules and regula-tions. At the same time, there are no restric-tions by back pressure and temperature of the exhaust gas equipment.
The exhaust gas treatment system delivered by Hug Engineering makes it possible to test engi-nes with unusual load profiles and in extraor-dinary engine running events without emitting visible smoke and other pollutants to the envi-ronment.
Figure: Example of exhaust gas treatment equipment for the control of emissions in a 5 engine test facilitiy with 3 lines
• No emission of visible smoke• Compliance with emission rules and regulations (for e.g. PM, NOx, CO, HC)• Fully automated and independent of engine testing• Works with multiple engines on one or several treatment lines• Covers all engine running profiles• No interruption of test facility operation during construction• No back pressure impact – full comparability with past engine reference runs• Proven equipment and instruments• Running cost optimized and tailor made solution