emmision control in two wheeler using catalytic converter
TRANSCRIPT
BY,
S.S.HARIRAM
A.JENSON JENO
M.JOSE VINOTH
B.SIVA KUMAR
Emmision control in two wheeler using catalytic
converter
The main content of our project is to develop an eco friendly environment by reducing pollution mostly in highly rushed traffic’s porn area’s . We have developed a small change in the earlier design of converter’s where the inner shell has been slightly modified and bought a platinum coated shell which allows to reduce the emmision and makes the vehicle to run more eco friendly, earlier it was made in heavy vehicle’s but we have made out in two wheeler’s
ABSTRACT
Catalyst's Simply put,
catalysts are substances which, when added to a reaction, increase the rate of reaction by providing an alternate reaction pathway with a lower activation energy (Ea).
In biochemistry, catalysts are known as enzymes
The catalytic converter was invented by Eugene Houdry , a French mechanical engineer and expert in catalytic oil refining who lived in the U.S. around 1950. Catalytic converters were further developed by a series of engineers including John J. Mooney and Carl D.Keith creating the first production catalytic converter in 1973
INTRODUCTION
CATALYTIC CONVERTERCatalytic
converters are found in automobiles.
Their role is to reduce to emissions of harmful gases (CO, VOC’s, NOx) that are the result of the combustion of fuel in vehicle engines
Three way converterCatalyst Layer Open
Porous Structure With Support Materials of High Thermal Stability
Mounting Materials With Improved Durability
High Cell Density Ceramic or Metallic Substrates
1 Catalyst Layer Containing Platinum and Rhodium,
2 Ceramic or Metal Substrate Chemical reaction :2 CO +O2 -------> 2 CO22 C2H6 + 7O2 ----> 4CO2 +6 H2O2 NO + 2 CO -------> N2 +2 CO2
METHOD OF OPERATION OF THETHREE-WAY CATALYTIC CONVERTER
Specifics of Catalytic Converters Most modern cars are
equipped with three-way catalytic converters. "Three-way" refers to the three regulated emissions it helps to reduce -- carbon monoxide, and NOx molecules .
The converter uses two different types of catalysts, a reduction catalyst and an oxidization catalyst. Both types consist of a honeycomb-shaped ceramic structure.
The main salint feature’s for the working is the catalytic converter. The emmision taking place in the engine will be lebarated through the exhaust valve and then goes out into the atmosphere here the exhaust from the engine is taken into the converter of platinum filled shell which absorbs the exhaust toxic gases and then goes to the environment which will almost emmit’s the gases coming out , which will reduce the gases of 80% of what exhausted than the earlier .
Working principle
Sensor'sThe rear most
Lambda sensors are not used to adjust the engine mixture but simply to identify the performance of the Catalytic Converters .
Used in vehicle’s to reduce the emmision .Used as a non-toxic agent.
Application's
Used to reduce the toxic gasesHigh efficincy of performance’sLow costHigh durability of core working
Advantage's
We construct a project successfully. On completing the project we come to a conclusion that constructing a mechanical project is a good experience. This project will surely make a change in the environment by running such kind of eco friendly vehicle which make the world to stay more longer.
conclusion
Thank you for making our idea’s to share with you.
Thank you