en 1090 welding from selco · english w. s e l c o d m for fabricators of steel and other metal...
TRANSCRIPT
EN 1090
Qualified Welding Procedure
s
en
glis
h
www.selcoweld.comwwwwwwwwwwwwwwwwwwwww...ssssssseeeeeeelllllllcccccccooooooowwwwwwweeeeeeelllllllddddddd...cccccccooooooommmmmmmwww.selcoweld.comwww.selcoweld.com
For fabricators of steel and
other metal structures
EN 1090 WELDING FROM SELCO
wwwwwwwwwwwwwwwwwwwwwww
EN 1090
Qualified Welding Procedure
s
wwwwwwwwwwwwwww
EN 1090 CE marking Starting in 2014, all fabricators of steel structures need to
CE mark their products in compliance with EN standard
1090-2.
On the one hand, this new legislation will make the European
market more competitive by introducing a uniform standard for
all countries in the European Community. On the other hand,
it will also require fabricators to adapt their working methods
and procedures according to the new certification system.
In order to simplify the certification process, Selco is
offering a chance to purchase a special 1090 version
of its Genesis Series MSE/PME/GSM MIG/MAG welding
power sources with 54 welding procedures conforming
to EN standard 1090-2 already incorporated. These
procedures refer to the most common execution
conditions (EN 1090-2, Table 12, Execution
Class EXC2) and cover the needs of
most normal welding in the
field of structural
fabrication.
go to the EN 1090 qualified procedures menu
select the procedure you want to use
start welding
wwwwwwwwwwwwwwww
Selco can lend a hand!
Welding power sources with integrated certifi cation
Genesis MSE 1090
MIG/MAG Standard320 A / 400 A / 500 A
Genesis PME 1090
MIG/MAG StandardMIG/MAG Pulsed320 A / 400 A / 500 A
Genesis GSM 1090
MIG/MAG StandardMIG/MAG PulsedTIG DC HF 320 A / 400 A / 500 A
• Reduced certification costs
• Simplified certification process
• Wide range of welding
procedure specifications (WPS)
(standard and pulsed
MIG/MAG)
MIG/MAG STANDARD
Steel
G3/4 Si1 Ø 0.8 / 1.0 / 1.2 mm 82% Ar 18% CO2
2.1 - 10.0 mm
CERTIFIED WELDING PROCEDURESPosition Joint Base
MaterialMaterial
Thickness(mm)
Validity Range
Consumable Gas 0(mm)
Program Code
PA BW Steel
(≤S355J2)
3.0 2.1 – 3.9 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CaS1.008CaS1.009Cf
PC BW Steel
(≤S355J2)
3.0 2.1 – 3.9 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CbS1.008CbS1.009Cg
PF BW Steel
(≤S355J2)
3.0 2.1 – 3.9 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CcS1.008CcS1.009Ch
PB FWSteel
(≤S355J2)
3.0 2.1 – 6.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CdS1.008CdS1.009Ci
5.0 3.0 - 10.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CkS1.008CkS1.009Ck
PF FW Steel
(≤S355J2)
3.0 2.1 – 6.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CeS1.008CeS1.009Cj
MIG/MAG STANDARD
Steel
G3/4 Si1 Ø 0.8 / 1.0 / 1.2 mm 82% Ar 18% CO2
3.0 - 24.0 mm
CERTIFIED WELDING PROCEDURESPosition Joint Base
MaterialMaterial
Thickness(mm)
Validity Range
Consumable Gas 0(mm)
Program Code
PA BW Steel
(≤S355J2)
12.0 3.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CfS1.008CfS1.009Ca
PC BW Steel
(≤S355J2)
12.0 3.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CgS1.008CgS1.009Cb
PF BW Steel
(≤S355J2)
12.0 3.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007ChS1.008ChS1.009Cc
PB FW Steel
(≤S355J2)
12.0 6.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CiS1.008CiS1.009Cd
PF FW Steel
(≤S355J2)
12.0 6.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
S1.007CjS1.008CjS1.009Ce
MIG/MAG PULSED
Steel
G3/4 Si1 Ø 0.8 / 1.0 / 1.2 mm 82% Ar 18% CO2
2.1 - 10.0 mm
CERTIFIED WELDING PROCEDURESPosition Joint Base
MaterialMaterial
Thickness(mm)
Validity Range
Consumable Gas 0(mm)
Program Code
PA BW Steel
(≤S355J2)
3.0 2.1 – 3.9 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CaP1.008CaP1.009Cd
PC BW Steel
(≤S355J2)
3.0 2.1 – 3.9 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CbP1.008CbP1.009Ce
PB FWSteel
(≤S355J2)
3.0 2.1 – 6.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CcP1.008CcP1.009Cf
5.0 3.0 – 10.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CgP1.008CgP1.009Cg
MIG/MAG PULSED
Steel
G3/4 Si1 Ø 0.8 / 1.0 / 1.2 mm 82% Ar 18% CO2
3.0 - 24.0 mm
CERTIFIED WELDING PROCEDURESPosition Joint Base
MaterialMaterial
Thickness(mm)
Validity Range
Consumable Gas 0(mm)
ProgramCode
PA BW Steel
(≤S355J2)
12.0 3.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CdP1.008CdP1.009Ca
PC BW Steel
(≤S355J2)
12.0 3.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CcP1.008CcP1.009Cb
PB FW Steel
(≤S355J2)
12.0 6.0 – 24.0 G3/4 Si1
ER70-S
82%Ar18%CO2
(M21)
0.81.01.2
P1.007CfP1.008CfP1.009Cc
SELCO s.r.l.Via Palladio, 19 - 35019 Onara di Tombolo (Padova) ITALY
Tel. +39 049 9413111 - Fax +39 049 9413311
[email protected] - selcoweld.com
Via P
Tel. +39 049 9
[email protected] - selcoweld.c
SELCO s.r.l.Via Palladio, 19 - 35019 Onara di Tombolo (Padova) ITALY
9 049 9413111 - F +39 049 9413311
- selcoweld.com
di Tombolo (Pado
Fax +39
cod.
90
.08
.18
60
1 G
rou
p m
arke
tin
g d
epar
tmen
t