EN Declaration of Conformity

Manufacturer: Evoko Unlimited AB Hästholmsvägen 32, 5th floor, 131 30 Nacka, SwedenProduct Name: Evoko Liso Room Manager / Evoko LisoPart Number: ERM2001

We, Evoko Unlimited AB, declare under our sole responsibility that the above referenced product complies with the following

Directive 2014/53/EU Directive 2011/65/EU

Art. 3(1)(a): Health & Safety EN 60950-1:2006+A11: 2009+A12: 2011+A2: 2013

Certification #: NL-42058 DEKRA Certification B.V

Art. 3(1)(b): EMC EN 55022: 2010+AC: 2011, Class B EN 55024: 2010+A1: 2015 EN 55032: 2012+AC 2013 EN 61000-3-2:2014 EN 61000-3-3: 2013 EN 301 489-1: V2.1.1 EN 301 489-3: V2.1.1 EN 301 489-17: V3.1.1 Certification #: 1670085R-ITCEP01V00 QuieTek Corporation

Art. 3(2): Radio Spectrum Frequency Power2.400 - 2.4835 GHz <100mW EN 300 328: V2.1.113.56 MHz <100mW EN 300 330: V2.1.1 5.150 - 5.350 GHz <200mW EN 301 893: V2.1.0

Certification #: DEKR25-1AEU Notified Body Number 2280MiCom Labs, Inc.

Additional Compliances: RoHs EN 50581: 2012

Date: 8 January, 2018 Nacka, SwedenName: Richard GlückmanTitle: CEO

Signature:

Class B: (Section 15.105)

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/ TV technician for help.(Section 15.21)

CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

(FCC 2.1091 and FCC 2.1093)RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Canada, Industry Canada (IC) Notices

This device complies with Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

IC