en-masse drag conveyor - easyfairs · en-masse drag conveyor flight selection ... l flexible screw...
TRANSCRIPT
The Right Equipment For The Job
We’re here to make a difference Contact our team at: +48 77 4743850, or by e-mail at [email protected] hapman.eu
En-Masse Drag Conveyor
The most efficient and versatile conveying technology.
• Move up to 1,000 TPH in a single unit.
• Convey in an enclosed, long-lasting, abrasion-resistant housing.
• Efficient size-to-capacity ratio; convey high volumes in a small footprint.
• Uses the longest-wearing drop-forged chain in the industry.
• Conveys a wide range of material from ash to zinc.
Streamline your process with an En-Masse drag conveyor system engineered for the unique needs of your application:
• Complete material handling systems from off-load to process or storage.
• Engineered electrical and controls with system integration.
• On-sight installation and start-up supervision available.
Standard Horizontal Conveyor
High Temperature Conveyor
NOMINAL CONVEYOR SIZES AND CAPACITIES*
* The hourly capacities are nominal and meant to provide the preliminary data for conveyor sizing. Each product has its own special characteristics, volumetric efficiency, kW factors, recommended chain speed, etc. Capacities reflect chain speeds from 0.05 - 1.03 m/s; contact Hapman for specific recommended speeds. For application of incline or vertical conveying, please contact Hapman. Higher capacities and wider dual strand conveyors are also available.
Conveyor SizeKg/Cubic
Meter 9” 11” 15” 19” 25” 30”Product: (Density) Hourly Capacity in TPH
Alumina 960 11 TPH 16 TPH 32 TPH 50 TPH 72 TPH 100 TPH
Ash (Dry) 800 8 TPH 13 TPH 23 TPH 36 TPH 54 TPH 77 TPH
Cement (Finished) 1442 72 TPH 109 TPH 204 TPH 331 TPH 481 TPH 690 TPH
Coal (Bituminous) 800 72 TPH 109 TPH 204 TPH 331 TPH 481 TPH 690 TPH
Fertilizers (Multiple) 1200 59 TPH 90 TPH 163 TPH 263 TPH 390 TPH 544 TPH
Grains (Whole) 1200 59 TPH 90 TPH 163 TPH 263 TPH 390 TPH 544 TPH
Limestone 1282 64 TPH 90 TPH 172 TPH 281 TPH 408 TPH 580 TPH
Malt 560 73 TPH 109 TPH 200 TPH 326 TPH 476 TPH 680 TPH
Meals (Food) 640 73 TPH 109 TPH 200 TPH 326 TPH 476 TPH 680 TPH
Petro-Coke 720 32 TPH 50 TPH 90 TPH 150 TPH 208 TPH 308 TPH
Phosphate Rock 1282 68 TPH 100 TPH 181 TPH 300 TPH 444 TPH 635 TPH
Salt Cake 160 3 TPH 5 TPH 9 TPH 15 TPH 21 TPH 32 TPH
Soda Ash (Dense) 960 45 TPH 68 TPH 132 TPH 209 TPH 308 TPH 440 TPH
Silica/Quartz (Sand) 1602 14 TPH 23 TPH 45 TPH 73 TPH 100 TPH 145 TPH
Wood chips (Sized) 400 18 TPH 27 TPH 54 TPH 82 TPH 122 TPH 181 TPH
Urea 720 41 TPH 64 TPH 118 TPH 190 TPH 281 TPH 400 TPH
Zinc (Calcined) 1762 90 TPH 145 TPH 272 TPH 435 TPH 635 TPH 907 TPH
ul. Niemodlinska 87/2,45-864 Opole, Poland
Phone: +48 77 4743850 Fax: +48 77 4745075
© 2014 Hapman. All Rights Reserved.HE1000A4-A
En-Masse Drag Conveyor
FLIGHT SELECTION These flight options represent the most common designs. Other styles are available.
T BT U
OOO OO(with filler plate)
See More Equipment At hapman.eu
We offer a true performance guarantee ensuring your Hapman equipment achieves the specific results it was designed and
manufactured to deliver. And if you need technical support, call us. We are available 24/7.
Hapman offers a complete line of material handling equipment that easily integrates into existing systems, including:
l Flexible Screw Conveyors l Bulk Bag Unloadersl En-Masse Conveyors l Bulk Bag Fillersl Bag Dump Stations l Bag Compactors l Feeders l Lump Breakers l And More
In-line Scoop Mounted Drives, Oil Tight
Chain Casings
Segmental/Symmetrical Drive Sprockets Reversible Teeth
Safety End Flap(Optional)
Packing Gland Shaft Seals(Optional)
(4) Bolt Split Pillow Block Spherical Roller Bearings
Heavy A.R.S. Construction
Drop-Forged Carburized Chain with Machined Pins
Split Pillow Block Roller Bearings (Optional)
Synthetic Backed Bearing Slide Plates
Spring Loaded Chain Take-ups
Segmental Rim Terminal IdlersSelf-Feeding Side Inlets
(Optional)
Adjustable Top Flanged Draw-off Box Inlets
(Optional)
Specifications Options
Horizontal
Straight Incline
L-Path
LAYOUT OPTIONS
ENGINEERED CONVEYOR DESIGN
• Our core hardness for strength and ductility is set at 300-400 BHN.
• Chain links are totally carburized to provide an effective case hardness of 550-650 BHN (60Rc) at a depth of 0.76 mm to 1 mm.
DROP FORGED CHAIN — CrMn Alloy Chain Link