enclosures road weather station rws200 - vaisala...road weather station rws200 enclosures box652 and...
TRANSCRIPT
Road Weather Station RWS200enclosures
ENC652 and BOX722 with radiation shield and cabling box
Features
• Protects weather stationelectronics
• Acid-proof against de-icingchemicals (stainless steelAISI 316)
• Mounting kits for lattice towersand different size of pole masts
Vaisala high-quality weather station enclosures protect weather station electronicsfrom the weather and other damaging elements. Enclosure materials are selected towithstand harsh roadside conditions, where de-icing chemicals constantly try tocontaminate the enclosure.
Robust designThe enclosures are made of stainlesssteel and the seams are continuouslywelded for maximum strength andsolidity.
Rubber flanges provide cabling accessthrough the bottom of the enclosure.
The door sealing is water proof.
The backplate to which all electronics areattached is made of stainless steel.
Additional shieldingOptional shielding is available for theenclosures. The set contains a cablingbox that protects the cabling fromvandalism and a radiation shield thatprotects the enclosure from excessivesunshine and falling material such as iceand tree branches.
Like the enclosure itself, the shieldingelements are finished with powdercoating.
Easy installationTo ease the installation, the enclosuresare delivered with a mounting frame. Themounting frame can be used to installthe enclosure on a wall or on thebackplate of another enclosure.
Mounting accessories are also availablefor mounting the enclosure on a thin polemast, a thick pole mast, or a lattice mast.
The enclosure door has two hinges and awind lock to keep it open in heavy winds.All installation and maintenance workcan be done without the door bangingon your shoulder.
Standard and slim modelsWith the standard ENC652 enclosure,you have a wider selection ofcomponents that fit inside the enclosure.On the other hand, the slim BOX722 canbe used in places where space is limited.
The following components are onlyavailable with ENC652:
• Additional power supply unit for theWMT700 sensor that has heatedtransducers and array arms
• Output socket for on-site tools orlaptop
• Residual-current circuit breaker (GFCI)
• Mains terminal strip for easier powersupply connection
ENC652 also has room for a larger,26 Ah / 12 V backup battery, whileBOX722 can only accommodate a 12 Ah /12 V backup battery.
ENC652 technical data
SpecificationsApprovals UL 50 / UL 50E-listing
IP rating IP66
NEMA rating NEMA 4X
Materials
Enclosure Stainless steel AISI 316, painted white
Self-clinching screw Stainless steel AISI 304
Backplate Fe/Zn
Flanges Rubber (TPE)
Radiation shield Aluminum EN AW‑5754
Dimensions (H × W × L)
Enclosure only 600 × 500 × 207 mm(23.62 × 19.68 × 8.15 in)
With radiation shield, mounting frame,and cabling box
787 × 581 × 270 mm(30.98 × 22.87 × 10.62 in)
Backplate only 555 × 455 × 42 mm(21.85 × 17.91 × 1.65 in)
Weight
Enclosure only 14.2 kg (31.3 lb)
Enclosure with furnished backplate(excluding backup battery)
27 kg (59.5 lb)
Shipping package
Dimensions Approx. 91 × 72 × 44 cm(36 × 28 × 17 in)
Weight Approx. 60 kg (132 lb)
ENC652 spare parts and accessories
Spare part or accessory Order code
Enclosure ENC652 with mounting plate, locks and flanges,mounting frame, radiation shield, and cabling box
ENC652KIT
Pressure port 16941DM
Cabling box ASM210466SP
Radiation shield ASM210463SP
Rubber flange set (2 pcs) DRFLANGE10SP
Enclosure lock set (2 pcs) ASM213869SP
Backplate assembly ASM211817SP
Enclosure accessories:• Cable ties 2.5×100 mm (20 pcs)• Cable tie holders FTH-13R-01 (5 pcs)• DIN rail end brackets (10 pcs)• Washers with EPDM gasket 6.8/16×1.5/A2/EPDM (4 pcs)• Hex screws M6×16 ISO7380 A4 (2 pcs)• Hex nuts M6 Wulock Fe/Zn (2 pcs)• Torx screws M4×8 ISO14583 TX A4 (10 pcs)• Flat washers A6.4 DIN125 A4 (4 pcs)
BOX652ACC1SP
ENC652 and BOX722 mounting kit options
Mounting kit Order code
Mounting kit for lattice mast ASM210998
Mounting kit for 60 mm (2.36 in) pole mast 1) APPK-SET60
Mounting kit for 75 mm (2.95 in) pole mast 1) APPK-SET75
Mounting kit for 100 mm (3.94 in) pole mast 1) APPK-SET100
Mounting kit for 80 … 600 mm (3.15 … 23.62 in) pole mast,excluding stainless steel band and locks 1) 2)
DRUNIV-US
Mounting kit for 80 … 600 mm (3.15 … 23.62 in) pole mast,including stainless steel band and locks 1)
DRUNIV
1) Installation requires 2 pcs of the mounting kit.2) You can use any suitable stainless steel band and locks for attaching the mounting support to the pole
mast, for example, Band-It 19.1 mm (0.75 in) with Ear-Lokt buckles. If you only need the band for a fewinstallations, use the DRUNIV mounting kit instead.
533 [20.98]
495 [19.49]
440 [17.32]
56
0 [2
2.0
5]
43
0 [1
6.9
3]
mm[in]
Mounting frame dimensions
BOX722 technical data
SpecificationsIP rating IP66
Materials
Enclosure, mounting frame base,cabling box, nuts, washers
Stainless steel AISI 316
Self-clinching screw Stainless steel AISI 304
Backplate Steel
Radiation shield Aluminum EN AW-5754
Flange, gaskets, plugs Rubber (TPE)
Dimensions (H × W × D)
Enclosure only 700 × 200 × 207 mm(27.55 × 7.87 × 8.14 in)
With radiation shield, mounting frame,and cabling box
887 × 322 × 270 mm(34.92 × 12.67 × 10.62 in)
Weight
Enclosure only 9.5 kg (20.9 lb)
Enclosure with backplate 19.3 kg (42.6 lb)
Shipping package
Dimensions Approx. 86 × 40 × 34 cm(34 × 16 × 13 in)
Weight Approx. 50 kg (110 lb)
BOX722 spare parts and accessories
Spare part or accessory Order code
Enclosure BOX722 with mounting plate, locks and flanges,mounting frame, radiation shield, and cabling box
BOX722KIT
Enclosure BOX722 BOX722SP
Cabling box ASM211127SP
Radiation shield ASM211081SP
Rubber flange set (2 pcs) DRFLANGE10SP
Enclosure lock set (2 pcs) ASM213869SP
Enclosure accessories:• Cable ties 2.5×100 mm (20 pcs)• Cable tie holders FTH‑13R‑01 (5 pcs)• DIN rail end brackets (10 pcs)• Washers with EPDM gasket 6.8/16×1.5/A2/EPDM (4 pcs)• Hex screws M6×16 ISO7380 A4 (2 pcs)• Hex nuts M6 Wulock Fe/Zn (2 pcs)• Torx screws M4×8 ISO14583 TX A4 (10 pcs)• Flat washers A6.4 DIN125 A4 (4 pcs)
BOX652ACC1SP
ENC652 and BOX722 mounting kit options
Mounting kit Order code
Mounting kit for lattice mast ASM210998
Mounting kit for 60 mm (2.36 in) pole mast 1) APPK-SET60
Mounting kit for 75 mm (2.95 in) pole mast 1) APPK-SET75
Mounting kit for 100 mm (3.94 in) pole mast 1) APPK-SET100
Mounting kit for 80 … 600 mm (3.15 … 23.62 in) pole mast,excluding stainless steel band and locks 1) 2)
DRUNIV-US
Mounting kit for 80 … 600 mm (3.15 … 23.62 in) pole mast,including stainless steel band and locks 1)
DRUNIV
175 [6.89]
268 [10.55]
66
0 [2
5.9
8]
230 [9.06]
53
0 [2
0.8
7]
mm[in]
Mounting frame dimensions
Published by Vaisala | B211470EN-D © Vaisala 2020
All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners.Any reproduction, transfer, distribution or storage of information contained in this document is strictlyprohibited. All specifications — technical included — are subject to change without notice.
www.vaisala.com