energy saving steet light timer
TRANSCRIPT
ENERGY SAVING STREET LIGHT TIMER
GROUP-2:
ABHIT SINHA
POOJA CHHABRA
CHARU AGRAWAL
AKSHITA AGGARWAL
VIKAS SINGH
ANKIT DESWAL
HIMANSHUBHAGWAN PARSHURAM INSTITUTE OF TECHNOLOGY
2nd YEAR
INTRODUCTION
This project aims at saving electricity.It's a very good and an innovativeidea.......to save our precious ENERGYRESOURCES. It utilizes our basicknowledge and the specific requirementof ELECTRICITY by the people of aparticular place...
BASIC CONSTRUCTS
It is basically a REAL TIME CLOCK that displays the
following data :
1. TIME
2.DAY
3.DATE
4.SUNSET TIME (IF ASKED TO DISPLAY)
5.SUNRISE TIME (IF ASKED TO DISPLAY)
It also enables us to set MULTIPLE ALARMS.
The sunset and sunrise time act as triggers for the
switching of lights.
It sets the light intensity required by the user at that time
automatically , and hence we make judicious use of
electricity(this prospect makes it an energy saving device).
HARDWARE CONNECTIONS
COMPUTERARDUINO
BOARDUSB CABLE
SETUP
USER SETU
P
MENU
(Start)
CALCULATEsunrise and
sunset time
MEMOR
Y
ALARMStreet
Light
Switching
BLOCK
DIAGRAM
Trigger
Set lat,
long , time
zone
OUTP
UT
1.Set lat, lon,
time zone
2.Set light
switching
timings
3.Set alarms
CONTROL FLOWSetup :
•Define pin modes
•Start ( )
•Time is set
Start ( )
Show menu to the user:
•Set longitude, latitude and time zone ( )
•Set light settings ( )
•Set alarm ( )
Set longitude, latitude and time zone ( )
Input longitude, latitude and time zone
Set light settings ( )
Set the increment, decrement time and night mode time
Set alarm ( )
We can set upto 5 alarms in our digital clock.
Void Loop ( )
Set Sunrise and Sunset time according to the latitude, longitude and time zone
if not set
Digital clock display:
Displays :
1. time
2. date
3. day of week
4. sunrise time(if required)
5. sunset time (if required)
It automatically changes light voltages according to the present time and
the sunrise and sunset time.
Contd.
DESIGN
It is designed using Arduino mega board , a USB cable connected to a computer.
IMPLEMENTATIONThis project is just a simulation of a real lifeproject . Here we will demonstrate it using theArduino kit .THE REAL PROJECT IS THEADVANCED FORM OF THIS PROJECTONLY....i.e. a single LED in this project will bereplaced by a number of street lights (to becontrolled) in the real project.
IMPORTANCE
This project is easy to use and install and has a
number of advantages.
All the settings are to be done by the user
during the time of installation only...once
installed, it requires no maintenance.
It describes the best way of saving electricity
without human intervention . It can also be
used as a digital clock that displays time and
date and has multiple alarm properties.
FUTURISTIC APPROACH
This project can be used anywhere in the
world, its database adjusts itself
according to the present latitude,
longitude and time zone entered by the
user. It can be used to automate street
lights in an housing society, hostel, park,
hotel corridors and in college premises or
anywhere you wish to install it.
PRESENTED
BY:GROUP-2
Designed by:
Pooja chhabra
THANK YOUFOR WATCHING IT