engineersspeanconengineers.com/wp-content/uploads/2018/08/...cold saw blades are designed to cut...
TRANSCRIPT
SPEANCONE N G I N E E R S
w w w.s p e a n c o n e n g i n e e r s.c o m
PREC I S ION AND PRODUCT IV ITY ASSURED
OUR COMPANY:Speancon Engineers has been associated with the cutting tools Industry since several years
We are committed to manufacture Tungsten Carbide Tipped (TCT) Circular saws to cut
wood, Plastics and composites such as Brass, Aluminium, Copper and steel.
Speancon has the latest plant & machinery with completely automatic manufacturing line.
We use the best raw material procured globally. We are strict to manufacture TCT Circular
Saw Blade of Industrial Premium quality.
Through the year, Speancon Engineers has developed an extensive relationship with the
clients by providing the products that are 'quality par excellence'. We have a technical
support team to provide not only after sales support but also guidance to use appropriate
tools for optimum finish. We believe in the philosophy or "Total Customer Satisfaction".
OUR VISIONLeadership is the capacity to translate Vision into reality.
Our goal is to maintain ahead of technology and continuously build capabilities to
bring practical applications of global knowledge to India, which in turn satisfied the
growth of our clients through the latest products and equipment.
SPEANCON PRODUCTS AND THEIR APPLICATIONS:
TCT Finger Joint CutterHigh Quality carbide tip for long life
& many Re-sharpenings, Precision
ground, 4 wing cutters for ultimate
balance&performance.
TCT CIRCULAR SAW BLADES TCT CIRCULAR SAW BLADES to cut Wood, Plywood, Veneers,
Chip boards, Particle boards, Fibreboards, Composite Boards,
Cement and Plaster boards, Calcium Silicate boards,
Industrial Laminates, Printed Circuit boards, Glass Fibre,
Plastics, Nylon, PVC, Bakelite Hylam, Acetate, Acrylic,
Celluloid, Thermoplastic boards, Asbestos, Polystyrene,
Rubberized cork, Rochwool Insulation boards, Gas Formed
concrete brick wood-wool building slabs etc. It is also used to
cut carcassing timbers and shutter boards with metal, nails &
concrete residues.
SCORING SAW BLADESPEANCONE N G I N E E R S
SPEANCONENGINEERS
TCT CIRCULAR SAW BLADES Non Ferrous Metal
TCT CIRCULAR SAW BLADES to cut non-ferrous metals like
aluminium, aluminium alloy, copper, copper alloy, cupronickel,
brass, brass alloy, bronze, zinc, magnesium, lead etc.
TCT COLD CIRCULAR SAW BLADES (Ferrous Steel Cut)TCT COLD CIRCULAR SAW BLADES to cut ingots, billets, forgings, bars, structural shapes, Ferrous heavy extrusions like rails, sections and rods.
SPEANCON
E N G I N E E R S
480x2.8x50x80Z
FRICTION CIRCULAR SAW BLADES
CIRCULAR KNIVES
FRICTION CIRCULAR SAW BLADES to cut metal
pipes, tubes, angles, profiles, channels, sections etc.
(Operating temperature up to 350°C) and also for
cutting PVC Pipes.
HSS CIRCULAR SAW BLADESCold Saw Blades are designed to cut ferrous and
non-ferrous metals. Cold Saw blades are made
From European M-2 HSS (Dm05) steel and are
specifically suited for use on manual,
semi-automatic and fully-automatic cold saws.
CIRCULAR KNIVES to cut Tobacco, Paper,
Cloths, Synthetic materials, cardboards,
cellophane, cement fiber, PVC, nylon, plastic,
leather, strawboard, jute, knitting fiber etc.
SPEANCONE N G I N E E R S
SPEANCONE N G I N E E R S
Mfg. of : Carbide T ipped Saw Blades & Finger Jo int Cutters
SPEANCON ENGINEERSOffice Address: Plot No. 512/6/10, Shayona Corporation, Road No.13 Kathwada GIDC Odhav, Ahmedabad-382415, Gujarat-India.
7069312978, 9879657065, Mail: [email protected], Website: www.speanconengineers.com
SPEANCONE N G I N E E R S
GEOMETRY OF CIRCULAR SAW BLADES
1. Positive hook angle
2. Negative hook angle
3. Expansion slot
4. Cooling slot
5. Outside wiper slot
6. inside wiper slot
7. Chip limiter
8. Single or double keyway
9. Pin hole
10. Pitch circle
11. Countersink holes
12. Recess for hogger attachment
13. Semi low noise cut
14. Low noise cut
D. Outside tool diameter
B. Tooth thickness
b. Saw body thickness
d. Bore diameter
DX Right hand rotation
SX Left hand rotation
Z. Number of teeth
TECHNICAL INFORMATION
PRECAUTIONS TO GET THE BEST RESULT FROM TCT CIRCULAR SAW BLADES:1. The machine spindle must run free without vibration.
2. Flange diameter must be 1/3 of the saw diameter.
3. Proper coolant must be use while cutting metals.
4. Clean the saw regularly, re-sharpen the saw timely.
5. The work piece must be guided correctly.
6. The circular twist of spindle must not exceed 0.02mm.