engineering mechanics annual report 2015 report 2015.pdf · international standards. selection of...
TRANSCRIPT
Engineering Mechanics Annual Report 2015
Graduate School on Engineering Mechanics c/o Eindhoven University of Technology PO Box 513, building GEM-Z 4.133 5600 MB Eindhoven NL Tel: +31 (0) 40 247 8306 E-mail: [email protected] Internet: http://www.em.tue.nl
Colophon: Editors: Prof.dr.ir. M.G.D. Geers Dr.ir. J.A.W. van Dommelen R.A.M.F. van Outvorst Publication: June 2016 Notice: This Annual Report is available at the EM website:
http://www.em.tue.nl/publications/index.php/2
Contents
Preface
1.
General Information
1.1 Introduction 6. 1.2 Mission 7. 1.3 Outline of the field of Engineering Mechanics 7. 1.4 Organization 9. 1.5 Participants 10. 1.6 Research themes 11. 1.7 Education 12. 1.8 General description of developments in 2015 18. 1.9 Memberships 20.
1.10 Aggregated input and output for 2015 24. 1.11 Overview of input and output per participating group, 2015 25. 1.12 Overview of co-operation 26. 1.13 External developments related to EM 27.
2.
Research documentation per participating group
Eindhoven University of Technology:
1. Dynamics and Control 29. 2. Mechanics of Materials and Microsystems 36. 3. Multiscale Engineering Fluid Dynamics 56. 4. Applied Mechanics and Design 61. 5. Analysis Scientific Computing and Applications 65.
Delft University of Technology:
6. Aerospace Structures and Computational Mechanics 72. 7. Precision and Microsystems Engineering 84. 8. Computational Mechanics, Structural Mechanics and Dynamics 96.
University of Twente:
9. Applied Mechanics 107. 10. Surface Technology and Tribology 120. 11. Production Technology 130. 12. Multi Scale Mechanics 138.
Appendices
A. Joint Research Activities A.1
B. Overview of Input 2011-2015:
Senior Academic Staff PhD-Students Postdocs Total Input in fte
B.1 B.2 B.3 B.4
C.
Overview of Output 2011-2015: Refereed Journals Books, Chapters in Books Refereed Proceedings PhD Theses Completed
C.1 C.2 C.3 C.4
D. Addresses
D.1
Preface
The National Research School on Engineering Mechanics, a joint initiative of the Eindhoven and Delft Universities of Technology and the University of Twente, herewith presents its Annual Report 2015. Since 2011, the new course programme 2011-2015 was started. The set up and contents of this new programme was intensively discussed with the EM staff members, the advisory board and the PhD researchers. Sofar, the new programme has been successful, with positively evaluated courses, among which several new ones. More details are given in section 1.7.1. There was a continuation of ongoing research in the field of Engineering Mechanics and of the structural activities of the Research School, such as the program of EM-graduate courses and the yearly Engineering Mechanics Symposium. Details on these activities are described and documented in this Annual Report 2015. The first chapter contains general and aggregated information on the Graduate School on Engineering Mechanics. Outlined are the Engineering Mechanics fields of research, as well as the organizational structure and the participating groups in the Research School. Furthermore, the selected research themes and the educational program are presented. Finally, there is a description of developments, a survey of the aggregated input and output and an overview of the input and output per participating group for 2015. In the subsequent chapters, the research documentation for 2015 is given in more detail per group, participating in the Research School. More specifically, there is information on research programs related to the Research School on Engineering Mechanics and on group members involved. Furthermore, there is a survey of refereed scientific papers, dissertations completed, memberships of editorial boards, international scientific committees, national science foundation and academies, keynote lectures, awards and patents. Each chapter concludes with an overview of research input and output for 2015. Finally, the appendices contain additional information on ongoing research and addresses of the research groups involved.
1. GENERAL INFORMATION
1.1 Introduction In the Netherlands, graduate schools have been founded for a variety of scientific disciplines. Interuniversity graduate schools are schools in which several Dutch universities participate, as laid down in a formal agreement between the Executive Boards of the participating universities. One of the universities is responsible for the daily organization and administration of the graduate school, including the organization of the PhD educational programme and various scientific activities. These activities are conducted under the responsibility of a scientific director, often, but not necessarily, one of the professors of the university that is in charge of the administration. The primary aims of graduate schools are to provide additional education and training for PhD students of the participating institutions and to foster scientific contacts and collaboration. For the Graduate School on Engineering Mechanics, the aims have been particularized in the Mission Statement, presented in section 1.2. Until 2014, Graduate schools could be accredited by the Royal Netherlands Academy of Arts and Sciences (KNAW), which gives a mark of quality. The accreditation was given on the basis of a proposal in which a coherent educational program for PhD students was described as well as coherence in terms of research between the participating teams. Accreditation was given for six-year periods. After such a period an application for renewal of the accreditation could be filed at the KNAW, which consisted of a self-assessment over the past period, together with a peer review based on a site visit, interviews and this self-assessment. The Graduate School on Engineering Mechanics was founded in 1996 and received a five-year accreditation of the KNAW directly at the first application in 1997. It embraces all research groups that are active in the field at the Eindhoven University of Technology, the Delft University of Technology and the University of Twente, with the Eindhoven University of Technology acting as the commissioner, hosting the secretariat. In 2001, 2006 and 2012 a peer review of the activities of the Graduate School over the first, second and third period of operation by an international review panel took place and in 2002, 2007 and 2013 the ECOS/KNAW-accreditation of the Graduate School on Engineering Mechanics was renewed. In 2014, the KNAW decided to completely abandon the accreditation procedures for Graduate Schools. This implies that the present period of 6 years is the last one for EM, in which the accreditation label still applies. The Graduate School on Engineering Mechanics represents the internationally active groups of the Dutch universities of technology in the area of engineering mechanics. The EM-school also co-ordinates and tunes the research activities in the participating groups (e.g. through the 3TU Centre of Excellence), and it has developed a complete graduate course programme in collaboration with the JM Burgers Centre (Graduate School on Fluid Mechanics). It can therefore be considered as the representative scientific platform in the Netherlands in the engineering mechanics field. This platform sets the strategic directions of future research in the Netherlands in the engineering mechanics field, and it is responsible for the quality of future generations of PhDs, who are the primary determinants of the quality of future activities in this area in the Dutch industries and universities. In the Graduate School on Engineering Mechanics, the individual research groups have an essential responsibility in executing their individual research programs. On basis of consensus, the graduate school thereby stimulates certain focal areas of research. More importantly, it exercises
6
a quality control on the level of research, since it has adopted a lower bound for the quality of the participating groups, which derives from the research assessments at the level of the university departments that are commissioned by the Netherlands Association of Universities (VSNU).
1.2 Mission
The Netherlands Graduate School on Engineering Mechanics has been established with the aim to strengthen research and education in the field of engineering mechanics in The Netherlands. The EM Graduate School intends to be a platform that, on the basis of a number of selected research themes, fosters long-term knowledge and skills in the engineering mechanics field. Although operating primarily at a national level, it intends to stimulate international collaborative research projects within the research themes. Within the foregoing global objectives the following more specific objectives can be formulated:
Training of PhD-students to become qualified independent researchers in the field of engineering mechanics according to international standards. To this end, a series of high-quality graduate courses is developed on specific subjects.
Co-ordination and tuning of the engineering mechanics research activities in the participating groups. Furthermore, the Graduate School aims at strengthening the available infrastructure for research in engineering mechanics. It can be stated that the present infrastructure meets high international standards.
Selection of the main research themes in engineering mechanics carried out within the EM Graduate School. These research themes are being characterized by a strong international
position of the research in the Netherlands, while at the same time they are of importance for Dutch industry and society.
Strengthening of the international scientific position and the international visibility of The Netherlands in the engineering mechanics field.
Cooperation with industries and technological institutes to promote the mutual exchange of knowledge on engineering mechanics.
Maintain close connections and cooperate with related fields of engineering.
Stimulate nation-wide thematic discussions, streamlined research strategies and organization of workshops for representatives from industry, technological institutes and project leaders to
discuss the needs of industries with respect to scientific research.
Guarding the standards of undergraduate education in the engineering mechanics area at the Dutch universities. This is done in particular by influencing policies with respect to the
appointment of professors and other senior staff in this area.
Attracting highly qualified engineers, prospective and established scientists to the Netherlands.
1.3 The field of Engineering Mechanics
Engineering mechanics is concerned with the description, analysis and optimization of the static and dynamic behaviour of materials, products and mechanical processes. Solid mechanics is at the heart of engineering mechanics, but is not necessarily identical to it. Traditionally, engineering mechanics is one of the fundamental cores of engineering sciences such as Aerospace Engineering, Civil Engineering, Mechanical Engineering and Maritime Technology.
7
Assisted by a steady growth in computational power, resources and efficiency, new challenges and perspectives for the engineering mechanics field have emerged. Contemporary developments of engineering mechanics include the following major directions:
Prediction of structural mechanical behaviour from material mechanics and establishment of structure-property relations for engineering materials and structures, including the ultimate failure of the material or structure. The ultimate aim is to bridge the gap between science and technology in the area of materials processing and design, via computational modelling and experimental analysis of the full thermo-mechanical history of material during their formation, processing and final design, in order to be able to quantitatively predict product properties. This equally applies to structures composed of these materials.
Prediction of the dynamic behaviour of engineering systems with full account of nonlinearities and multiphysical dynamic interaction and experimental identification under operational conditions. This area is of crucial importance in many practical dynamical systems where friction, contact and other nonlinearities have a substantial effect on the dynamic behaviour.
Optimization of products, processes and systems by means of computer simulations to enhance the reliability and to tailor their mechanical behaviour for the particular application. Here, it is assumed that the simulation of the mechanical behaviour can be carried out in a sufficiently accurate way, while the optimal design is traced numerically. Among typical application areas, the following can be highlighted:
miniaturization & micro-technology: design, optimization, processing and functionality of MEMS (micro-electro-mechanical systems) and NEMS (nano-electro-mechanical systems); processing, performance and reliability in SiP (systems in package); low-k solutions in IC-technology; lead-free soldering; 3D printing…
high-tech consumer applications: flexible displays; flexible photovoltaic cells; lab-on-a-chip systems; RF-MEMS wireless technology; …
high-tech materials: metastable materials; shape memory alloys; TRIP-steels; GLARE; Ni-based superalloys; thermoshock materials; high-temperature engine materials; self-healing materials; thermoplastic composites, …
innovation and optimization in manufacturing: polymer-coated sheet processing in packaging; discrete die forming; damage engineering in metals; paperboard engineering; friction stir welding; …
dynamics of materials and structures: nonlinear control of motion systems and robotics, vehicle dynamics, tire dynamics, acoustics and control, structural acoustics and noise control, structural health monitoring;...
construction engineering: collision-proof ship hulls; damage control in masonry and concrete structures, …
topology optimization of smart structures As a consequence of the above developments, the traditional boundaries between solid and fluid mechanics are sometimes fading. This happens, for example, in fluid-structure interaction (FSI), in the field of mechanics of materials and in the area of acoustic radiation of structures. In addition, the interactions with other areas of engineering sciences, such as materials technology, thermodynamics and systems and control, become of increasing importance. Finally, it is noted that the successful implementation of the abovementioned developments in practical applications relies on prior experimental validation of the developed simulation tools and physical models. This requires an increasing interaction between computational modelling and experimental analysis.
8
1.4 Organization
The organizational structure of the Graduate School on Engineering Mechanics is summarized in the following organization chart:
The Scientific Director is in charge of the day-to-day management of the Graduate School. Local Directors from the participating Universities assist him in this. Eindhoven as commissioner supplies extra support for general management and secretariat. Altogether they form the Management Team. The Governing Board establishes the annual plans on research, education and finances of the Graduate School. They are advised on this by the Advisory Board, which consists of representatives from industry and applied research institutes. The composition of the Governing Board and the Advisory Board in 2015 is as follows:
Governing Board Advisory Board
Prof.dr.ir. L.J. Sluys (Chairman) Delft University of Technology
Dr.ir. P. van den Berg Deltaris
Prof.dr.ir. F. van Keulen Delft University of Technology
Ir. H.J. ten Hoeve NLR, Marknesse
Prof.dr.ir. A.H. van den Boogaard University of Twente
Dr.ir. F.J. Klever Shell Int. Exploration and Production B.V., Rijswijk
Prof.dr.ir. E.H. van Brummelen Eindhoven University of Technology
Dr.ir. J. van der Lugt Tata Steel Research, IJmuiden
Prof.dr.rer.-nat. S. Luding University of Twente
Prof.dr.ir. H.M.A. Wijshoff Océ Technologies B.V.
Dr. Ir. F.J. Blom NRG, Petten
Ir. H.C.L. Vos TNO, Delft
Drs. M.M. van Wingerde M2i
9
The Board of AIOs represents the PhD-students within the Graduate School towards the Management Team. They are involved in the evaluation and organization of the EM-symposium and initiate activities for fellow PhD-students. Members are:
Board of AIOs
Ir. S.M. (Sandra) Kleinendorst Eindhoven University of Technology Department of Mechanical Engineering
Ir. M. (Matthijs) Oomen University of Twente Department of Engineering Technology
Ir. R.J. (Rob) Dedden Delft University of Technology Department of Mechanical, Maritime and Materials Engineering
1.5 Participants The Graduate School on Engineering Mechanics was founded as an inter-university Graduate School by the Eindhoven and Delft University of Technology and the University of Twente. The Eindhoven University of Technology acts as the commissioner, hosting the secretariat. Co-operation takes place through local institutes and consortia.
Each of them invokes the contributions of specific research groups:
University Department Group, Groupdirector(s) TU/e
Mechanical Engineering
Dynamics and Control, Prof.dr. H. Nijmeijer
Multiscale Engineering Fluid Dynamics Prof.dr.ir. E.H. van Brummelen
Mechanics of Materials and Microsystems Prof.dr.ir. M.G.D. Geers, Prof.dr.ir. J.M.J. den Toonder
Mathematics and Computing Science
Analysis Scientific Computing and Applications (CASA) Prof.dr. M.A. Peletier, Prof.dr.ir. B. Koren
Built Environment Applied Mechanics and Design Prof.dr.ir. A.S.J. Suiker
TUD
Aerospace Engineering Aerospace Structures and Computational Mechanics Prof.dr. C. Bisagni
Mechanical, Maritime and Materials Engineering
Applied Mechanics (PME) Prof.dr.ir. F. van Keulen
Civil Engineering and Geosciences Computational Mechanics, Structural Mechanics and Dynamics Prof.dr.ir. L.J. Sluys, Prof. dr. A.V. Metrikine
UT
Engineering Technology
Applied Mechanics Prof.dr.ir. A. de Boer, Prof.dr.ir. A.H. van den Boogaard
Surface Technology and Tribology Prof.dr.ir. D.J. Schipper
Production Technology Prof.dr.ir. R. Akkerman
Multi Scale Mechanics Prof.dr.rer.-nat. S. Luding
10
On an annual basis contributions from Eindhoven (TU/e), Delft (TUD) and Twente (UT) amount to:
TU/e
(fte) TUD
(fte) UT
(fte) Total (fte)
Senior academic staff 7,2 6,9 7,1 21,2
PhD* 33,6 53,6 53,6 140,8
Postdocs 7,2 5,3 5,0 17,5
Total 48 65,8 65,7 179,5 * Research input per PhD per year: 0,8 fte
More detailed information on the participating groups can be found in subsequent chapters of this Annual Report 2015.
1.6 Research themes
An important goal of the Graduate School on Engineering Mechanics is the co-ordination and combination of research activities of participating groups. In accordance to this it was decided to group the research activities into three research themes: 1. Computational and Experimental Mechanics
This research theme is related to the potential of modern computational and experimental techniques for solving problems in mechanics. Much attention is paid to optimal numerical procedures and to large-scale computing. Important applications are in the field of crash simulation of vehicle systems, simulation of production processes, in particular forming processes, as well as complex structures in civil engineering and aerospace engineering.
2. Structural Dynamics and Control This research theme is related to the dynamic behaviour of engineering structures. Particular attention is paid to nonlinear dynamics and fluid-structure-interaction. Also of importance is the interaction with control. Important applications are in the field of rotating machinery, noise reduction and drive systems.
3. Reliability and Optimization This research theme is related to the development of design procedures based on reliability, as well as to structural optimization with respect to mechanical behaviour. Important applications are in the fields of biomedical technology (e.g. heart valves) and in the field of thin-walled structures.
These research themes fit well with the major directions in contemporary engineering mechanics as described in Section 1.3. Furthermore, they are characterized by a strong international position of the research in the Netherlands, while at the same time they are of importance for Dutch industry and society. Point of departure in all research themes is the development of models based upon the principles of engineering mechanics. These models necessitate and motivate the development of contemporary numerical and experimental tools for solving engineering mechanics problems. The application of these tools in computer-aided design and production processes results in a decrease in the development time of advanced products, and thereby time-to-market, for instance due to a reduction in the required amount of prototypes. Also, an increase in product quality and a reduction in production and operating costs are worth mentioning, improving competitiveness. The optimal use of computational resources for complex numerical simulations
11
as well as the incorporation of nonlinear phenomena in the modeling is common to all three themes.
Research groups participate, depending upon their expertise and affinity, in several themes:
Group
Computational and Experimental Mechanics
Structural Dynamics and
Control
Reliability and Optimization
TU/e
Dynamics and Control
Multiscale Engineering Fluid Dynamics
Mechanics of Materials and Microsystems
Analysis Scientific Computing and Applications
Applied Mechanics and Design
TUD
Aerospace Structures and Computational Mechanics
Applied Mechanics
Computational Mechanics, Structural Mechanics and Dynamics
UT
Applied Mechanics
Surface Technology and Tribology
Production Technology
Multi Scale Mechanics
1.7 Education
The most important goal of the Graduate School on Engineering Mechanics is the formation and education of graduate students to become independent researchers in the field of Engineering Mechanics. In accordance with this, the Graduate School offers a national four-year training program for PhD students in the field of Engineering Mechanics. It consists of a programmatic part and a PhD research project, accompanied by a personal plan of education and supervision per PhD student. In addition to these joint courses the programmatic part contains an individual course program, with initial and post-initial courses selected from the programs offered at participating groups. Furthermore, participation in workshops and summer schools under guidance of foreign visiting lecturers forms part of it, as well as practical work at foreign top institutes.
12
1.7.1 Course curriculum The PhD research project covers about 80% of the four-years training program. Research topics are in connection with the research program of the Graduate School. As the research approach within the Graduate School is thematically oriented, research students get the opportunity both to deepen their knowledge in the context of their own project and to broaden their vision on the research field as a whole. The programmatic part of the training program, including personal and professional skills covers about 20% of the four years training program. The heart of it is formed by a joint series of EM graduate courses, in close connection with the selected research themes. PhD-students can take part in the courses, providing the opportunity to keep track with developments in the field of engineering mechanics outside their own focus of research. EM-graduate full courses all follow a general framework, which consists of two three-day clusters of lecturing, alternated with (computer) exercises to obtain hands-on experience. In principle, staff members of the participating universities teach the courses, inviting (international) experts in the field as guest lecturers where relevant. The programme successfully started in 1998. All courses are evaluated systematically and results are discussed with lecturers and Governing Board. In general, participants are very content with the courses, appreciating their relevance and the new knowledge and information offered. Furthermore, courses enable a fast and effective interaction between research and education. To keep the connection with the selected research themes actual and up-to-date the contents of individual courses is regularly updated. The present courses organized by EM are listed below:
- Continuum thermodynamics Topical course
- Optimization and parameter identification Topical course
- Nonlinear material mechanics Full course
- Solutions methods in computational mechanics Topical course
- Solving structural acoustic coupled problems Topical course
- Stability of Structures Full course
- Mechanics in microsystems Topical course
- Discontinuities, interfaces, fluid-structure interaction, multi-phase Topical course
- Advanced dynamics Full course
- Experimental engineering mechanics Topical course
- Multi-scale and micro-mechanics Full course
- Mechanics of large deformations Topical course
13
1.7.2 Structure of the Engineering Mechanics PhD course programme for the period 2011-2015
In 2008, a new course programme has been established in the interest of the PhD students and
Post-Docs. Key characteristics are: a two-years cycle course programme, formal registration of
credit points, more courses and courses of different type (broad or in depth).
Details are provided below:
The minimum educational load for PhD students is 15 credit points (one credit point is equivalent
to one ECTS-credit and will be further referred to as EC), i.e. 1/4 of a year. After completing the
programme, a PhD student receives a formal certificate, as proof of his/her successful
participation in the EM course programme.
Boundary conditions:
The courses have to be attended completely. PhD students who only attend a part of a course will not receive credit points for that course.
Each individual has to supply a written proof of the successful completion of a local or external course, to be signed by the supervising professor (promoter).
The EC-equivalent of each course will be determined at 0.5 EC/day.
In order to obtain credit points for an external course that has not been previously approved by EM, the PhD student must request for an approval prior to the start of the course.
In order to obtain the EM certificate, a PhD student must have attended the EM symposium at least 2 times during the PhD contract.
EM will publishes a full course calendar on its website.
PhD students who collected a minimum 15 EC, receive a formal certificate, formally handed over during the annual EM symposium.
Outline of the structure of the EM-courses in the programme:
Duration of a cycle in the course programme = 2 years.
Full courses (3 EC): 6 day courses covering the wide scope of key areas in EM. Two such courses are organized every year, i.e. 4 courses in a cycle of 2 years. These courses include a rapid summary of basics followed by advanced topics that are beyond the MSc level.
Topical courses (0.5 or 1 EC): 1- or 2-day courses on specific subjects, for a smaller group of participants. These courses may either strengthen the generic basis or provide specific in-depth knowledge. About 8 such courses are offered in a 2-year cycle.
Recognized courses and allowable share within the programme:
EM-courses and workshops: PhD courses organized by EM (details below). Minimum share = 8 EC.
Recognized external courses organized by external graduate schools or institutes and approved by the EM board.
Master courses given at local institutes to patch missing skills in the training of a PhD student, as required for his/her particular project. If MSc courses are taken, the course exam is compulsory and has to be passed. Maximum share = 5 EC.
Additional courses such as presentation skills, technical writing, etc. can also be mentioned on the certificate.
14
On request of the PhD student, EM will provide the promotor with a list of the EM-courses he/she
participated in. On the basis of this list and on the request of the PhD student, the promotor can
make a letter stating the full overview of all courses taken in the educational plan of the PhD
student applying for this letter.
EM courses
All EM courses are integral part of a 2-year programme, listed in the sections 1.7.3 (cycle 2015-
2016 and 1.7.4. (Provisional planning cycle 2015-2016)
External courses
External courses that may be recognized (0.5 EC/day):
CISM courses
GrasMech courses
Graduate courses J.M. Burgers centre
Graduate courses DISC
1.7.3 The Engineering Mechanics PhD course programme for the present cycle 2015-2016. The following EM courses have been lectured as a part of the educational programme:
Title: Continuum Thermodynamics
Date; Location: April 13 – April 14, 2015, TUD
Lecturers: Turteltaub, Suiker, Kouznetsova
Credit points: 1
Participants: 32
Contents:
General introduction: Objectives and scope, Notation and summary of tensor algebra and analysis
Thermodynamics of continuum media: Basic mechanical and thermal concepts: Reference and
current configurations, Mechanical concepts, Thermal concepts, Energy of a continuüm, Intensive
and extensive quantities in the reference and current configurations. Thermomechanical
principles: Principles in global form (integral relations), Principles in local form (differential
relations). Constitutive theory: Field equations and constitutive models, Thermoelasticity, Theories
with internal variables, Dissipation and kinetic relations: Onsager’s framework.
Thermo-elasticity: Introduction, Thermodynamical laws, General equations of a thermoelastic
material, Thermodynamical equilibrium, Linear thermoelastic material, Isotropic linear
thermoelastic material, Isothermal and adiabatic conditions
Elastoplasticity Introduction, Inelastic materials and internal variables, Constitutive laws and
dissipation inequality Elastoplastic material, Approach based on postulate of maximum
dissipation, Approach based on dissipation potential, Von Mises plasticity with isotropic
hardening, Von Mises plasticity with kinematic hardening, Drucker-Prager plasticity with isotropic
hardening Martensitic phase transformations and damage: Introduction Martensitic phase
transformations: Transformation kinematics and stress-strain response, Formulation in terms of
the Helmholtz and Gibbs energy densities, Thermomechanical constitutive model, Kinetic relation
15
for transformation, Heat conduction and latent heat, Summary of main model equations. Phase
transformations with damage: Derivation of model equations from Helmholtz energy density,
Driving forces for transformation and damage, Stress and conservative entropy, Kinetic law for
damage.
Although the emphasis in the present course is on solid materials, the general thermodynamical
principles are valid for continuum media, including fluids (liquid and gases).
Title: Structural Optimization: algorithms and applications
Date; Location: May 11 and May 18, 2015, Tue/TUD
Lecturers: Geijselaers, Keulen, Langelaar
Credit points: 1
Participants: 35
Contents:
The course consists of lectures and some computer-practical sessions. The course covers the
following topics: Basic principles: Introduction to design optimization, optimization problem
formulation, problem properties, conditions for optimality, classification of optimization problems.
Gradient-based local search methods: Concepts of gradient-based search methods, line search
methods, trust region methods, methods in structural optimization.
Surrogate modeling: Concepts of surrogate modeling, response surface modeling, radial basis
functions, neural networks.
Structural sensitivity analysis: Approaches, finite difference gradients, semi-analytic derivatives,
adjoint formulation, continuum derivatives. Structural topology optimization: Topology optimization
concepts, SIMP method, level set method, sensitivity analysis, applications
Title: Stability of Structures
Date; Location: June 15 – June 17 / June 22 – June 24, 2015, TUD
Lecturers: Tiso, Onck, Sluiter, Meer, Langelaar, Goosen
Credit points: 3
Participants: 38
Contents:
Elastic stability, Introduction to elastic buckling, Asymptotic buckling analysis for elastic problems,
Finite element implementation of Koiter analysis, Multimode post buckling Koiter analysis,
Nonlinear static equilibrium: Newton–Raphson algorithms, path following techniques, Dynamic
buckling, Influence of plasticity on post-buckling response, Rigid-plastic second order analysis,
Computational modelling of plastic collapse, Topology optimization under buckling constraints,
Buckling and residual stress in MEMS/NEMS, Buckling-driven self-formation of microchannels,
Buckles in graphene: Competition between elastic bending energy and substrate-thin film
interaction, Analytical models and molecular dynamics simulations.
Title: Nonlinear Material Mechanics
Date; Location: October 13 - October 15 / October 20 – October 22, 2015, UT
Lecturers: Akkerman, Boogaard, Geijselaers, Luding, Magnanimo, Perdahcıoğlu
Simone, Sluys, Thornton
Credit points: 3
16
Participants: 31
Contents:
Vectors and tensors, Kinematics (material coordinates, deformation tensor, polar decomposition,
strain tensors), Force and stress, Balance laws, Fundamental concepts of constitutive, equations
(thermodynamics, frame, indifference, elasto-viscoplasticity, yielding and hardening), Multi phase
materials (phase transition, TRIP, composites, anisotropy), Plasticity models and continuüm
damage, models (yield functions, damage loading, functions, tangential formulation, return
mapping, locking), Higher-order continua (non-local, gradient, models, micro polar models)
Deformation mechanics in composite, laminates, extreme anisotropy and, intraply shear locking
Particle Methods (particle systems, molecular dynamics for particle systems, smooth particle
hydrodynamics for, continuum systems), Depth-averaged models (applied to granular systems)
From Particle Systems to Continuum, Theory (micro-macro transition methods, plastic flow
models, higher order continua, advanced theories), Nonlinear solution techniques (Newton-
Raphson methods, convergence criteria, Load-, displacement-, arc-length-control), Discontinuous
models (weak/strong, models (GFEM/XFEM), continuousdiscontinuous, models)
Title: Solutions methods in computational mechanics
Date; Location: November 4 – November 5, 2015, TU/e
Lecturers: Thije Boonkkamp, Anthonissen
Credit points: 1
Participants: 33
Contents:
Partial differential equations (PDEs) are ubiquitous in mechanics, describing a wide range of
phenomenae like stresses in a solid or waves. In this course we will address some numerical
methods for PDEs. In particular, we will discuss discretisation methods for PDEs and iterative
solution methods for the resulting algebraic systems. The following topics are included:
Classification of second order PDEs, Finite difference methods for the Poisson equation (central
differences, compact scheme), Finite volume methods for generic elliptic PDEs, Discretisation
methods for the wave equation (second and fourth order schemes), Newton-type methods for
nonlinear algebraic systems, Iterative solution methods for linear systems (basic methods,
projection methods, Krylov subspace method and preconditioning)
The discretisation methods will be analyzed in terms of accuracy and stability. We like to emphasize
that finite element methods are not covered in this course. As for the iterative solution methods, a
few state-of-the-art methods for sparse systems, both symmetric and no symmetric, will be
discussed. The course will include a number of computer sessions with MATLAB, in which the
participants can put in practice the numerical methods introduced. The required prior knowledge
includes elementary numerical analysis and linear algebra.
1.7.4. The Engineering Mechanics PhD course programme for the upcoming cycle 2016-2017
The provisional planning of the EM courses for the first year of the upcoming cycle 2016-2017 is
given below:
Topical courses (typical duration: 1-2 days) and Full courses (typical duration: 6 days)
17
Subject/title Organizers Scheduling ECTS
Solving Structural Acoustic coupled problems
Lopez, Wijnant 25 - 26 January, 2016 1
Discontinuities, interfaces, fluid-structure interaction and multi-phase problems
van Brummelen v.d.Zee, Remmers, Huyghe
9 - 11 May, 2016 1,5
Mechanics in microsystems Goosen, Sprengen, Ghatkesar, Thijsse
May 24 – May 25, 2016 1
Advanced Dynmaics
Alijani, Aragon, HosseinNia, Schwab, Klerk, Fey, de Boer, Ellenbroek, Schilder
June 20 - June 22 / June 27 - June 29, 2016
3
Experimental Engineering Mechanics
Hoefnagels, September 19-September 20, 2016
1
Multi-scale and micromechanics
Geers , van Dommelen, Hoefnagels
November 14 - November 16, 2016/ November 21 – November 23, 2016
3
Mechanics in Large Deformations
v.d.Boogaard 25 - 26 January, 2017 1
Reliability Tinga Februari, 2017 1
Continuum Thermodynamics Turteltaub March/ April,2017 1
Optimizations and parameter identification
Etman May, 2017 1
Stability of Structures van Keulen June, 2017 3
Nonlinear Material Mechanics
Boogaard, Sluys, Luding September/October, 2017 3
Solutions methods in computational mechanics
Thije Boonkkamp, Anthonissen
November, 2017 1
The main (responsible) organizer is underlined. Tentative date*
1.8 General description of developments in 2015
2015 was another successful year for the graduate school EM. Like in the previous years priority was laid on the continuation of the research activities in the field of Engineering Mechanics. This resulted in the following overall output for 2015:
Scientific publications: refereed journals 226(14*)
Scientific publications: books, chapters in book 15
Scientific publications: refereed proceedings 129
PhD theses 25
* Publications in co-operation between different EM-groups
This output is documented in more detail in subsequent chapters of this Annual Report To stimulate the exchange of information on ongoing research within the Graduate School, the Eighteenth Engineering Mechanics Symposium took place on October 25 and 26, 2015 in congress centre “Hotel Papendal” in Arnhem. One hundred fifty six members of the senior academic staff and PhD-students participating within the Graduate School attended the Eighteenth Engineering Mechanics Symposium.
18
Prof. Dr.-Ing. Stefanie Reese presented a keynote lecture, entitled “Computational modeling from the material point to the black box” The topics of the Workshops at the 2015 EM Symposium were “Composites”, “Frictional cohesive materials”, “Thin walled and flexible structures” and “Wave dynamics” . Each of the workshops started with a Plenary Introduction by the Workshop Organizers on the trends and challenges of the topics of the workshops. Next, two of the actual Workshops were scheduled to run in parallel on the first Symposium day, whereas the other two were scheduled to run in parallel on the second Symposium day. Each Workshop consisted of two parts, separated by a break. Each part consisted of two presentations by PhD-students/Postdocs. In conjunction to the oral presentations there was a PhD-students presentation contest, awarding a prize for the best PhD presentation at each of the Symposium Workshops. Members of the jury were the Workshop Organizers. Winners of the PhD-students presentation contest were: Iuri Rocha (TUD) with a contribution entitled “Hydrothermal Ageing of Glass/Epoxy Composites for Wind Turbine Blades”, Stefano Muraro (TUD) with a contribution entitled “Stress-strain behaviour of peats; an experimental insight”, Zhao Mingjuan(TUD) with a contribution entitled “3D wave scattering by a cylindrical lined tunnel embedded in an elastic half space” and Salman Shafqat (TU/e) with a contribution entitled “A novel bulge test based characterization methodology for buckled membranes”. In two poster sessions 78 PhD-students and Postdocs of the EM Graduate School presented their current research project. This resulted in stimulating discussions on running projects. In conjunction to the poster sessions a poster contest was organized in which a jury selected the best three contributions. The jury consisted of the following members: Dr.ir. L.F.P. (Pascal) Etman, Dr.ir. E.S.(Semih) Perdahcioglu, Prof.dr. C.(Chiara) Bisagni, Dr. ir. F.J. (Frans) Klever.
Winners of the poster contest were: M. Malagù (TUD) with the poster “Computational modeling of size effect in carbon nanotubes and carbon nanotube reinforced polymers ”, A. Ruybalid (TU/e) with the poster “Shedding lights on materials in LED’s”, A. Torkabadi (UT) with the poster “Controlling springback of Advanced High-Strength Steels by understanding the elastic and anelastic behavior”. The contributed posters are published in an information brochure. The winning contributions can be found on the EM website http://www.em.tue.nl/history/index.php/6 Additional remarks:
The Annual Report 2014, with information on participating research groups, was published in 2015. It was distributed among participants and relations of the Graduate School.
There was a meeting of the Advisory Board of the Graduate School on Engineering Mechanics on October 28, 2015, which took place after the Eighteenth Engineering Mechanics Symposium. At this meeting the future strategy and directions of the EM Graduate School were discussed.
There was a meeting of the board of project leaders on October 28, 2015, in which the EM activities were evaluated and the Seventeenth Engineering Mechanics Symposium was discussed. Plans for the Nineteenth Engineering Mechanics Symposium, to be held 25-26 October, 2016 in Hotel Papendal in Arnhem, were also discussed with all faculty members
19
present. The planned workshop topics for 2016 are: “Optimisation and additive manufacturing”, “Multi-physics and coupled problems”, “Experimental mechanics”, and “Dynamics at the small scale”.
1.9 Memberships: 1.9.1 Memberships
Regular Membership – Group based
The regular membership of the Graduate School Engineering Mechanics is based on the
admittance of a 3TU research group to become a group member of the School. The membership
of a group is based on three criteria:
Research programme of the group:
The programme should fit in the mission of the EM graduate school and there needs to be a
solid basis for co-operation between the scientific group members and other members in the
graduate school. The group’s research programme must have a critical mass that lies well
within EM’s scope.
Scientific performance and quality:
A new research group can be admitted to EM: (1) on the basis of a proven scientific track
record that underpins the quality of the group leader and faculty members, for a group with
established scientists; (2) on the basis of good expectations for scientific quality and
performance for the group leader and faculty members for a new (young) group. If a new EM
group has previously been assessed by QANU, the requirements outlined in section 1.9.4 for
existing member-groups apply for the new group as well.
Expectation for integration in the graduate school:
The integration of a new group within EM implies an active participation in the execution of
EM’s PhD course programme and a regular participation of PhD students in the courses
offered by EM. Group members are expected to participate in the annual EM symposium to
present their scientific progress in the oral and poster sessions.
Group based members of EM either fall in one of the following categories:
Faculty members
Faculty members are junior (assistant professor) or senior (associate or full professor)
researchers appointed at the research groups by one of the respective universities. They have
a prime responsibility in supervising the PhD students and Post-Docs during their research
projects, and in assisting all PhD students during their PhD educational programme. A high
quality of the supervision is one of the key requirements. Faculty members from an EM
research group can be voluntary member of EM if their research focus fits in the EM research
programme. As a member of the Graduate School EM, faculty members are expected to
actively contribute to the knowledge dissemination (PhD course programme) and knowledge
exchange (EM symposium).
20
Post-Docs
Post-Docs are young researchers with a PhD degree, who actively contribute to research
projects in the participating research groups. They can take benefit of the EM course
programme and they are expected to participate and contribute to the yearly EM symposium.
They can also play an active role in the Graduate school, by assisting in the PhD educational
programme.
PhD students
PhD students are the research members of the Graduate school, aiming to obtain a PhD with
the support of the Graduate School and the educational part thereof. The PhD projects are
proposed by the supervisors and typically fit within the scope of the EM research topics. PhD
students belonging to member groups are admitted to the Graduate School on proposal of
one of the supervising faculty members (also EM member). They are expected to fully attend
the EM course programme for 15 ECTS and they are expected to participate and contribute to
the yearly EM symposium.
The membership of a group involves a yearly financial contribution, and an individual (small)
contribution to the EM-symposium. The group and individual fees will be determined yearly by
the governing board of the Graduate School. For the yearly fee, full access to the educational
programme for all subscribed group members is granted.
MSc student membership
Excellent MSc students from an EM research group (i.e. an EM group membership as defined in
section 1.1 applies) that are following a MSc-PhD Graduate programme or who have been
identified as potential PhD students in the master phase already, can be admitted as a MSc
student member of the EM Graduate School. These students need to be registered in one of the
adhering Master programmes of the EM graduate school. MSc student members can be admitted
to the Graduate School upon nomination of the MSc/PhD supervisors (EM members). Admittance
implies that MSc student members are allowed to participate in the EM PhD educational
programme and the EM symposium.
Associate Membership – Individually based
Individual faculty members who are not part of an EM research group (as defined in section 1.1)
can be admitted to the Graduate School as an associate member. They can also propose a
maximum of 2 PhD students or Post-Docs to become an associate (PhD student or Post-Doc)
member. Note that only 1 faculty member from a group can be an associate member. A larger
participation in EM necessitates a group membership. Associate members of EM can be (1)
researchers from a non-EM research group of 3TU, (2) researchers from Dutch non-3TU research
groups that have an established scientific track record of high quality in engineering mechanics or
(3) established researchers of high quality from a non-Dutch group.
21
The associate membership implies that Associate members can participate in all EM events,
including its educational programme. Associate members (faculty, Post-Doc or PhDs) have to
contribute financially to the activities (including EM courses) in which they participate.
Industrial Membership
Companies and institutes with long-term research activities in the field of the Graduate School
can request an industrial membership of the Graduate School Engineering Mechanics. The
industrial membership grants full and free access to all courses of the EM course programme for
research employees working in the company. Moreover, as an industrial member, researchers
from these companies or institutes can attend the EM symposium, where they can also actively
participate in the poster sessions. For registration at the symposium, the EM-researchers regular
fee has to be paid.
The industrial membership of a company or research institute involves a yearly financial
contribution, and the individual contribution for participation to the EM-symposium. The level of
the company and individual symposium fees are determined yearly by the governing board of the
Graduate School.
1.9.2 Selection, admission criteria and procedures
Group membership
A group membership is granted by the Board of the Graduate School. The group leader sends a
written motivated request to the scientific director. The Board decides on the basis of all criteria
and arguments provided. Once the group is admitted to EM, all group members (faculty, PhDs,
Post-Docs) can subscribe to EM by completing subscription. The subscription forms of PhD
students and Post-Docs must be approved and signed by the direct project supervisors.
MSc student membership
Excellent master students, who wish to become an MSc student member, can fill in a subscription
request. This request needs a separate motivation from the responsible supervisors, accompanied
by a list of course marks obtained in the MSc course programme. The scientific director decides on
the basis of all information provided.
Associate membership
An associate membership is also granted by the Board of the graduate school. A formal request
has to be sent to the scientific director. The Board decides on the basis of the established
contacts with EM members, the embedding, expected integration and contribution to the EM
graduate school.
22
Industrial membership
An industrial membership can be granted by the Board of the Graduate School to companies or
research institutes with a strong interest for the EM research activities. To this purpose, the
company or institute sends a written motivated letter to the scientific director. The Board
decides on the basis of all criteria and arguments provided. Once a company or institute is
admitted to EM, its research employees can freely participate in the course activities of the
Graduate School.
1.9.3 Double memberships
Faculty members
Faculty members can be member of more than 1 graduate school. They are nevertheless
expected to play a substantial and active role in each of the graduate schools in which they
participate. To be admitted to the graduate school, at least 25% of the research activities should
fit in EM’s research programme.
PhD students and Post-Docs
Researchers (PhD students and Post-Docs) can be member of one graduate school only (KNAW
requirement).
1.9.4 Quality monitoring & control
Quality expectations
The Engineering Mechanics graduate school expects all its group members and associate members
to aim for a contribution to a high quality research programme. This includes high quality
publications with a good citation impact, keynote lectures, patents or inventions, editorial roles in
international journals, memberships of international assessment committees, etc. In terms of PhD
supervision, a good progress monitoring procedure is expected. It is the prime responsibility of the
group leader to work towards these goals.
Independent assessment
Every 6 years, the quality of the research programmes is assessed by QANU. All research
programmes are evaluated in terms of quality, quantity, relevance and viability. The outcome of
this assessment constitutes the prime feedback on the quality of the research programmes. The
quality of the PhD supervision is monitored through direct feedback from PhD students, either
individually or through the PhD student board.
Monitoring
As a minimum threshold for scientific quality, the QANU marks for quality, quantity, relevance
and viability, according to the most recent version of the SEP protocol, have to be at least 3, 3, 3,
3, respectively.
23
In case a research group underperforms as apparent from the QANU assessment its membership
will be reconsidered by the EM Board. If the supervision of an individual PhD student lacks
quality, the EM management team will directly contact the responsible supervisors to address
the problem.
1.9.5 Additional provision
All situations for which this regulation does not apply will be handled by the Governing Board of
the Graduate School.
1.9.6 Documentation other memberships:
Associated Memberschips:
Participating Groups:
Group Control Systems Technology Group Director: Prof.dr.ir. M. Steinbuch TU/e
Group Energy Technology Group Director: Prof.dr.ir. D. Smeulders TU/e
Industrial Memberschips:
Participating Companies:
Shell, Tata Steel, Deltares, Océ
1.10 Aggregated input and output for 2015 1.10.1 Input related to EM, 2015
For 2015 the personnel input, aggregated over all participating groups, amounts to: Sources of financing
1) Total
1 2 3 number fte Senior academic staff 73 2 4 78 21,2 Supporting staff
2) 11 11
PhD3)
9 41 126 176 140,8 Postdocs 6 11 13 30 17,5 Total 99 54 143 296 179,5
1) Sources of financing 1: University;2: STW, NWO, FOM;3: Industry, TNO, Brite-Euram, Nuffic, Min. Econ. Affairs, M2i, DPI, etc.
2) No research input involved for supporting staff.
3) Research input per PhD per year: 0.8 fte
A subdivision of the input in fte over the participating Universities gives the following results: TU/e
(fte) TUD (fte)
UT (fte)
Total (fte)
Senior academic staff 7,2 6,9 7,1 21,2 PhD* 33,6 53,6 53,6 140,8 Postdocs 7,2 5,3 5,0 17,5 Total 48 65,8 65,7 179,5
* Research input per PhD per year: 0.8 fte
24
1.10.2 Output related to EM, 2015 For 2015 the output, aggregated over all participating groups, amounts to:
A subdivision of the output over the participating Universities gives the following results:
TU/e TUD UT Total
Scientific publications: refereed journals 83 67 76 226(14*)
Scientific publications: books, chapters in book 3 6 6 15
Scientific publications: refereed proceedings 24 69 36 129
PhD theses 9 10 6 25 *Publications in co-operation between different EM-groups
1.11 Overview of input and output per participating group, 2015 In this section the 2015-input and the 2015-output per participating group are summarized. Further details can be found in the description of individual groups in subsequent chapters. Aggregated results are reported in the preceding paragraph.
1.11.1 Input related to EM, 2015
Group Senior academic staff
Supp. staff
PhD-partition PhD-totals Post doc
Total
# fte # #PhD1 #PhD2 #PhD3 # fte fte fte
TU/e
Dynamics and Control 10 2,3 0 1 4 6 11 8,8 4 15,1
Multiscale Engineering Fluid Mechanics
2 0,7 0 0 4 0 4 3,2 0 3,9
Mechanics of Materials and Microsystems
10 3,3
2 1 5 14 20 16 3,2 22.5
Analysis Scientific Comp. and Applications
3 0,6 0 0 3 0 3 2,4 0 3.0
Applied Mechanics and Design
2 0,3 0 0 4 0 4 3,2 0 3,5
TUD
Aerospace Structures and Computational Mechanics
7 2 0 1 0 16 17 12,8 0,9 15,7
Applied Mechanics 9 2,6 0 3 6 11 20 16,8 3,2 22,6
Computational Mechanics, Structural Mechanics and Dynamics
7 2,3 1 0 4 26 30 24 1,2 27,5
UT
Applied Mechanics 11 2,7 3 1 4 20 25 20 1,6 24,3
Surface Technology and Tribology
7 1,3 3 2 4 22 28 22,4 0,8 24,5
Production Technology 5 1,5 2 0 0 9 9 7,2 0,5 9,2
Multi Scale Mechanics 6 1,6 0 0 3 2 5 4 2,1 7,7
Scientific publications: refereed journals 226(14*)
Scientific publications: books, chapters in book 15
Scientific publications: refereed proceedings 129
PhD theses 25 *Publications in co-operation between different EM-groups
25
1.11.2 Output related to EM, 2015
Group Ref. journals Books, chapters in
book
Ref. proceedings
PhD- theses
TU/e
Dynamics and Control 8 1 15 1
Multiscale Engineering Fluid Dynamics 8(2*)
0 0 0
Mechanics of Materials and Microsystems 53(2*) 1 6 7
Analysis Scientific Comp. and Applications 10 1 1 1
Applied Mechanics and Design 4(1*) 0 2 0
TUD
Aerospace Structures and Computational Mechanics 20(1*) 5 25 3
Applied Mechanics 22 1 25 3
Computational Mechanics, Structural Mechanics and Dynamics 25 0 19 4
UT
Applied Mechanics 20(4*) 2 15 1
Surface Technology and Tribology 18(1*) 2 11 4
Production Technology 14(3*) 2 5 1
Multi Scale Mechanics 24 0 5 0 *Publications in co-operation between different EM-groups
1.12 Overview of co-operation
1.12.1 Internal co-operation
With reference to its mission statement the Graduate School on Engineering Mechanics fosters the co-operation between participating research groups. This has resulted in an increasing number of joint research projects that received substantial input from different EM-groups. Joint projects for 2015 are summarized in Appendix A. Furthermore, co-operation between members from different participating groups resulted in a total of 14 joint publications in refereed journals and proceedings.
1.12.2 External co-operation
Within the field of mechanics of materials, the Graduate School on Engineering Mechanics has a long tradition of co-operation with one of the former four leading technological institutes, namely the Materials Innovation Institute (M2i). In recent years, M2i had to change its operational roads in financing research, whereby the present route makes use of the STW-HTM calls, in which M2i represents the industrial partners. The EM projects in this institute form a coherent program that concentrates on forming processes and on the fundamental understanding and the predictive analysis of a number of carefully selected generic industrial problems. The main challenge within this program is the accurate prediction of mechanical properties of materials with complex microstructures, in view of their application in micro-systems (functional materials) and various engineering manufacturing processes. Establishing micro-macro structure-property relations with a particular emphasis on the improvement of materials, processes and products at various scales, is thereby a key issue tackled both experimentally and numerically. The scientific work in this area directly supports the long-term strategy of the industrial partners involved, by acquiring fundamental insight that leads to improved materials and processes. At the same time, the investigated applications in several projects are fine-tuned to a particular industrial request, which provides direct answers to specific engineering questions in industry. The EM Graduate School participates in M2i with 2 clusters
26
(cluster 1 on ‘Virtual shaping and structural performance’ and cluster 2 on ‘Multi-scale fundamentals of materials’). The Graduate School on Engineering Mechanics also co-operates with other universities, research institutes and various industrial partners. External Co-operation: Education With respect to education the EM Graduate School co-operates with other Graduate Schools. It has been agreed that the PhD Students of the EM and JMBC (fluid mechanics) Graduate Schools will be enabled to follow each other’s courses. The same holds for PhD students of the EM Graduate School and the Belgian National Graduate School in Mechanics (GraSMech).
1.13 External developments related to EM
The research schools Engineering Mechanics (Solids) and J.M. Burgers Centre (Fluids) jointly compose the 3TU Research Centre of Fluid and Solid Mechanics. There is a long tradition of co-operation between the two research schools. The organizational structure of the research schools and their embedding in 3TU and the Netherlands is shown in the scheme below. At the international level, the two research schools are represented by the Netherlands Mechanics Committee (NMC), through which all formal communication with international scientific organisations (IUTAM, IACM, EUROMECH, etc.) flows. (should 4TU be mentioned as an external development?)
27
In 2014, the students enrolled in the joint EM-JMBC graduate programme (supported by NWO) started the PhD phase. Four students are presently working on their PhD projects, funded by NWO through the Excellence Track ‘Fluid and Solids Mechanics’. The research programme of the joint EM-JMBC graduate programme is composed of the core research areas in Fluid and Solid Mechanics. The Solids pillar in engineering mechanics is concerned with the description, analysis and optimization of the static and dynamic behaviour of materials, products and processes. Solid mechanics is at the heart of engineering mechanics, through which it plays a vital role in economy and society. The Fluids pillar is concerned with the description, analysis and optimization of fluid flows. It is at the heart of phenomena in our environment and is important for a multitude of industrial, biomedical and environmental processes. The interaction between fluids and solids in many engineering problems across the scales, constitutes a natural common part between both disciplines. Solid and Fluid Mechanics play a significant role in many areas of applications that are relevant for our economy, our society and the preservation of our environment. Solid and Fluid Mechanics are a core part of the educational programmes of a number of disciplines, e.g. Civil Engineering, Mechanical Engineering, Maritime Technology, Applied Physics, Aerospace Engineering, Applied Mathematics and Chemical Engineering. The financing of the Graduate Schools has changed considerably, and will be effective from 2015 onwards. As a result of the actions taken by SODOLA and in agreement with the VSNU, the boards of the universities have decided to provide financial support to the interuniversity graduate schools, like EM. For 2015, EM received a financial support of 50 kEuro from the Board of TU/e and and in kind support of 50 kEuro from the Department of Mechanical Engineering of TU/e. In 2014, the accreditation system of KNAW has come to an end. KNAW decided that it is no longer their responsibility to judge the scientific quality of the graduate schools, since this is largely embedded in the research evaluation of the different departments. On the other hand, the educational part is systematically more integrated in the local graduate programmes that each of the universities is developing. At present, discussions are ongoing to embed the quality mark of our graduate school in the 3TU context.
28
Research documentation per participating group
1. RESEARCH DOCUMENTATION OF THE GROUP DYNAMICS AND CONTROL
1. University/Department Eindhoven University of Technology Department of Mechanical Engineering 2. Subprogrammes related to research school EM 2.1 Non-linear Dynamics of Mechanical Systems 2.2 Structural Acoustics and Noise Control, Optimization 2.3 Vehicle dynamics, tire dynamics and control 2.4 Mechanical Design and Vision 2.5 Systems Design Optimization 2.6 Control of Manufacturing Systems 2.7 Nonlinear and hybrid dynamics 3. Group directors
Prof.dr. H. Nijmeijer
4. Senior academic staff: name, position, research input in fte related to research school EM
Besselink, Dr.ir. I.J.M. Assistant Professor 0.3 Fey, Dr.ir. R.H.B. Assistant Professor 0.4 Lopez, Prof.dr.ir. I. Associate Professor 0.2 Nijmeijer, Prof.dr. H. Full Professor 0.2 Rosielle, Dr.ir. P.C.J.N. Associate Professor 0.2 Wouw, Prof.dr.ir. N. v.d. Associate Professor 0.2
Saccon, Dr.ir. A. Adan, Prof.dr.ir. I.J.B.F. Pogromsky, Dr.ir. S. Lefeber, Dr.ir. A.A.J.
Assistant Professor Full Professor Assistant Professor Assistant Professor
0.1 0.1 0.3 0.3
Total fte: 2.3
29
5. Running PhD project in 2015 related to research school EM: Zhenyu, Ir. Ye, (PhD3) Embedded Vision Architecture (EVA) 09-2009 / 01-2016 Loof, ir. J. (PhD2) Truck steering system 09-2013 / 08-2017 Michielsen, ir. J. (PhD2) Acoustic shielding of high tech systems 02-2011 / 09-2015 Moers, ir. E.M.T. (PhD3) Acoustic Holography 09-2011 / 01-2016 Ran, S. MSc. (PhD3) Shimmy in Vehicles 04-2014 / 01-2016 Wang, J. MSc (PhD3) Vehicle Heterogeneous Cooperative
Driving 09-2012 / 08-2016
Kural, K. MSc (PhD3) Future modular road vehicles 04-2011 / 01-2016 Temiz, M. MSc (PhD2) Study of passive control of sounds 02-2013 / 02-2017 Zhou, H. MSc
(PhD3) Micro-Perforated Plates Broadband Planar Nearfield Acoustic Holography based on One-third- octave Band Analysis
09-2012 / 09-2016
Ir. F. Hoogeboom Ir. S. Fleuren
(PhD1) (PhD2)
Center for cooperative and autonomous driving Impuls VIDI
12-2015 / 12-2019 09-2012 / 09-2016
6. Postdocs: name, country, project title, sub programme, research theme EM and period of stay
Dr. D. Bera (PD2) STW: H-Haptics 10-2014 / 10-2016 Dr. F. Tateo Dr.ir. T. van der Sande Dr.ir. E. Steur
(PD2) (PD1) (PD1)
STW: Acoustic Shielding Vehicle Dynamics and Control With ICMS
2014 / 2016 2015 / 2017 2015 / 2017
7. Dissertations:
Name: Dr.ir. J. Michielsen Title: Low-frequency acoustic optimization of a double-wall panel by means of
Vibration absorbers Advisor: Prof.dr.ir. I. Lopez Arteaga Co-advisor: Prof.dr. H. Nijmeijer Date: September 30, 2015 Current position: ASML
8. Short description of sub programmes related to research school EM
8.1 Non-linear dynamics of mechanical systems
The numerical and experimental study of non-linear and in particular non-smooth mechanical systems, such as systems with friction, impacts or other constraints are key activities in this sub-theme, and play an essential role in the modeling and analysis of advanced mechanical systems. The research on these phenomena is highly relevant in many engineering applications (friction in high-performance/high-precision systems, drill strings, high-speed milling, hybrid control
30
systems etc.). Numerical aspects are notably difficult, but are becoming more and more feasible with increasing computer power. Related to research theme “Structural Dynamics and Control”
8.2 (Structural) acoustics and noise control, optimization This sub-theme deals with various structural vibrations and the associated sound radiation. The focus is on the one hand on numerical/computational tools for acoustic models, and on the other hand on the experimental validation of those tools. Subsequently, both passive and active means for acoustic noise suppression are investigated. Several mechanical applications are used as benchmark examples, particularly tire–road noise. The development of tools for optimization is essential in the dynamic behavior of mechanical constructions. Related to research theme “Structural Dynamics and Control”
8.3 Vehicle dynamics, tire dynamics and control
Vehicle Energy Management Systems Topology Design Research is done on energy management of the complete power train, including the design trade-offs for hybrid vehicles with an internal combustion engine and an electromotor. Advanced model-based optimisation methods, like dynamic programming, are used for the off-line generation of optimal trajectories for the variables that dictate the energy supply from the combustion engine and/or the electromotor. We started a new research project on a hybrid truck. Vehicle Dynamics and Tyres The group is responsible for the research and teaching in vehicle dynamics. The research focuses on modeling, analysis and control of articulated vehicles, and modeling and analysis of vehicle tires. For the latter, extensive use is made of the flat plank tire tester in the Automotive Engineering Lab. The tire research is linked to the tire–road noise research referred to above. Related to research theme “Structural Dynamics and Control”
8.4 Mechanical Design and Vision The mechanical design group Construction and Mechanism is jointly headed with Prof.Dr.Ir. M. Steinbuch (Control Systems Technology). Dr.ir. P.C.J.N. Rosielle leads the activities in the C&M lab, which comprises on average 6 PhD students and about 10 MSc students. Focal point in the lab is the construction and design of advanced, novel mechanical systems. Related to research theme “Structural Dynamics and Control”
8.5 Systems Design Optimization Optimization methods to support systematic design and improvement of complex engineering systems are investigated. We concentrate on simulation-based design optimization in the context of manufacturing system and distribution centre networks, manufacturing machines, automotive systems, and micro-mechanical systems. Optimization methods and tools are being developed that can deal with typical governing characteristics such as: one or more computationally expensive computer simulation models in the loop, a mix of continuous and
31
discrete design variables, stochastic design variables and responses, and dynamic response behaviour. The development of techniques for approximation, meta-modelling, and lumped-parameter modelling that can be utilized in the optimization plays a central role in our research work. Furthermore, methods for design optimization of multidisciplinary and multi-level decomposed systems have our special interest. Related to research theme "Reliability and Optimization".
8.6 Control of Manufacturing Systems
In this sub programme two main streams can be considered. The first stream considers a class of manufacturing systems that can be approximately modelled by means of a continuous time fluid or flow model. For this approximate model, standard techniques from control theory can often be used to design controllers. As the manufacturing system has a discrete-event nature, a connection between the discrete event plant and the continuous time controller has to be developed. Continuous time signals have to be converted to discrete-events and measurements of discrete states need to be filtered for a better control performance. Currently available flow models often ignore variability, whereas queuing theory often considers only steady state behaviour. For that purpose new (mathematical) models need to be developed that include both variability and dynamics. It is clear that preferably these models should be suited for applying standard control theory in order to control these systems. The second stream considers the control of a network of servers through which many types of jobs flow, where it is assumed that servers require a setup time when switching between types. Such networks can be used to model complex communication, traffic or manufacturing systems. Related to research theme “Structural Dynamics and Control”
8.7 Nonlinear and hybrid dynamics
In this subprogram two main directions can be considered. First, general questions of nonlinear dynamics and control of mechanical systems including switched (hybrid) systems are studied. In recent years hybrid systems attracted a considerable attention due to possible applications in various fields of science and technology. The theory of hybrid systems is far from its completeness. Therefore it is of interest to further develop methods of analysis and design for such systems. In this research particular attention is drawn to the following two questions: analysis of oscillations in hybrid systems and formalization of some mathematical models of hybrid systems using the formal languages approach. The formal language used is Chi developed in the Systems Engineering group. The second direction of the research is to study applications for the theoretical results in the framework of systems engineering. Nowadays complex manufacturing machines contain discrete-event and continuous-time parts with interactions between the components. These interactions can result in nonlinear dynamical phenomena that should be taken into account during design and real-time control of the machine. This research theme has a strong relation with the topic Embedded Systems (within the Institute for Programming and Algorithmic). Related to research theme “Structural Dynamics and Control”
32
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Murguia Rendon, CG, Fey, RHB & Nijmeijer, H 2015, 'Network synchronization of time-delayed coupled nonlinear systems using predictor-based diffusive dynamic couplings' Chaos, vol 25, no. 2, 023108, pp. 023108-1-1/17., 10.1063/1.4906820 Ran, S, Besselink, I & Nijmeijer, H 2015, 'Energy analysis of the Von Schlippe tyre model with application to shimmy' Vehicle System Dynamics : International Journal of Vehicle Mechanics and Mobility, vol 53, no. 12, pp. 1795-1810., 10.1080/00423114.2015.1093151
9.2 Books, chapters in book
Chapters in book:
E. Steur & H. Nijmeijer (2015) ‘Network topology and synchronization of systems with linear
time-delayed coupling'. In MK Camlibel, AA Julius, R Pasumarthy & JMA Scherpen (eds),
Mathematical Control Theory I: Nonlinear and Hybrid Control Systems. Lecture Notes in Control
and Information Sciences, vol. 461, Springer, Berlin, pp. 321-341., 10.1007/978-3-319-20988-
3_17
9.3 Proceedings Gorban, AN, Jarman, NN, Steur, E, Nijmeijer, H, Leeuwen, van, CC & Tyukin, IYIY 2015, 'Directed
cycles and multi-stability of coherent dynamics in systems of coupled nonlinear oscillators'. in 4th IFAC Conference on Analysis and Control of Chaotic Systems CHAOS 2015 — Tokyo, Japan, 26–28 August 2015. IFAC-PapersOnline, vol. 48,no.18, Elsevier, Amsterdam, pp. 19-24,
Hosseini, N, Kornilov, V, Teerling, OJ, Lopez Arteaga, I & de Goey, P 2015, 'Transfer function calculations of segregated elements in a simplified slit burner with heat exchanger'. in The 22nd International Congress on Sound and Vibration., 10.13140/RG.2.1.2824.4007
Hosseini, N, Kornilov, V, Teerling, OJ, Lopez Arteaga, I & de Goey, P 2015, 'Investigating the
effects of heat exchanger on flame transfer function in a simplified boiler'. in COMBURA'15
Combustion Research and Application., 10.13140/RG.2.1.3531.6243
Morales Medina, A, van de Wouw, N & Nijmeijer, H 2015, 'Automation of a T-intersection using
virtual platoons of cooperative autonomous vehicles'. in Proceedings of the 2015 IEEE 18th
International Conference on Intelligent Transportation Systems, 15-18 September 2015, Gran
Canaria, Spain. IEEE Service Center, Piscataway, pp. 1696-1701., 10.1109/ITSC.2015.275
33
Murguia Rendon, CG, Pena-Ramirez, J, Jeurgens, NLM, Fey, RHB, Oguchi, T & Nijmeijer, H 2015, 'Synchronization in Cartesian-product networks of time-delay coupled systems'. in 4th IFAC Conference on Analysis and Control of Chaotic Systems (IFAC CHAOS 2015), 26-28 August 2015, Tokyo, Japan.
Ran, S, Besselink, IJM & Nijmeijer, H 2015, 'Energy balance and tyre motions during shimmy'. in
4th International Tyre Colloquium : Tyre Models for Vehicle Dynamics Analysis, 20-21 April 2015,
Guilford, United Kingdom. University of Surrey, Guildford, pp. 129-138
Rijnen, M, Saccon, A & Nijmeijer, H 2015, 'On optimal trajectory tracking for mechanical systems
with unilateral constraints'. in IEEE 54th Annual Conference on Decision and Control (CDC),
December 15-18, 2015. Osaka, Japan. IEEE Service Center, Piscataway, pp. 2561-2566
Steur, E, Leeuwen, van, CC & Pogromsky, A 2015, 'Synchronous oscillations in networks of time-delay coupled inert systems'. in 4th IFAC Conference on Analysis and Control of Chaotic Systems CHAOS 2015 — Tokyo, Japan, 26–28 August 2015. IFAC-PapersOnline, vol. 48,no.18, Elsevier, Amsterdam, pp. 31-36
10. Overview of research input and output “Dynamics and Control” related to EM, 2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 10 10 2,3
Supporting staff 2)
PhD 3) 1 4 6 11 8,8
Postdocs 2 2 4 4
Total 13 6 6 25 15,1
1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 2
Scientific publications: books, chapters in book 1
Scientific publications: refereed proceedings 8
PhD theses 1 * In cooperation with other EM-groups.
34
11. Keynote lectures and seminars
12. Memberships 12.1 Editorial boards international journals
Prof.Dr. H. Nijmeijer:
Editor Communications in Nonlinear Science and Numerical Simulations
Corresponding editor SIAM J Control Optimization
Subject editor International J. of Robust and Nonlinear Control
Member Editorial Board International J. of Control
Member Editorial Board Nonlinear Dynamics
Member Editorial Board International Journal of Bifurcation en Chaos
Board International Physics and Control Society (IPACS)
12.2 International scientific committees
Prof.dr. H. Nijmeijer:
IFAC ( International Federation of Automatic Control ) Council Member (2012-2014)
Panel Member VolkswagenStiftung, Hannover
Member Platform of Complex Systems
Advisory Board AMOS (Trondheim, Norway)
12.3 National Science Foundation and Academies
Scientific Director DISC
Member of the KNAW advisory Council TWINS (Technische Wetenschappen, Wiskunde, Informatica, Natuurkunde, Sterrenkunde)
NWO Advisory Board Complexity 13. Awards, patents and NWO grants 14. International collaborations:
Prof.dr. Nathan van de Wouw Full Adjoint Professor University of Minnesota
Prof.dr.ir. Ines Lopez Arteaga Full Professor KTH Stockholm
35
2. RESEARCH DOCUMENTATION OF TU/e MECHANICS OF MATERIALS AND MICROSYSTEMS
1. University/Department
Eindhoven University of Technology Department of Mechanical Engineering
2. Subprogrammes related to research school EM 2.1 Multi-scale Mechanics & Structure-Property Modelling 2.2 Computational and Experimental Micromechanics 2.3 Damage, Fracture and Reliability 2.4 Microsystems 3. Group directors
Prof.dr.ir. M.G.D. Geers Prof.dr.ir. J.M.J. den Toonder
4. Senior academic staff: name, position, research input in fte related to research school EM
Prof. dr. V.S. Deshpande Part time Professor 0.1 Dr.ir. J.A.W. van Dommelen Associate Professor 0.4 Prof.dr.ir. M.G.D Geers Full Professor 0.4 Dr.ir. J.P.M. Hoefnagels Assistant Professor 0.4 Ir. F.G.A. Homburg, Assistant Professor 0.4 Dr.ir. V.G Kouznetsova Assistant Professor 0.4 Dr.ir. R.H.J. Peerlings Associate Professor 0.4 Dr.ir. J.J.C. Remmers Associate Professor 0.4 Dr.ir. O. van der Sluis Part time Assistant Professor 0.1 Prof.dr.ir. J.M.J. den Toonder Full Professor 0.3 Total fte: 3.3
5. Running PhD-projects in 2015 related to research school EM:
5.1 Multi-scale Mechanics & Structure-Property Modelling
Bastawrous, M. (PhD 3) A multiscale experimental study of the hygro-mechanics of paper
09-2013 / 08-2017
Gao, K. (PhD 2) Multiscale modeling of acoustic shielding 03-2012 / 02-2016 Geus, T. de (PhD 3) Ductile failure of Dual Phase steel: a
microstructural analysis 04-2012 / 03-2016
Lewinska, M. (PhD 3) Application to nonlinear acoustic 02-2015 / 02-2019
36
metamaterials: design, optimization, synthesis, testing
Maraghechi, S. (PhD 3) Coupled micro-fluctuation-based 08-2014 / 08-2018 experimental multiscale analysis Mohammad Ameen, M.
(PhD 3) The fundatmentals of luctuation-enriched Computational homogenization methods
06-2014 / 06-2018
Ruybalid, A. (PhD 3) In-situ identification of interface properties within 3D microelectronic devices
02-2013 / 01-2017
Sridhar, A. (PhD 3) Multiscale transient dynamic analysis 08-2014 / 08-2018 Of heterogeneous materials using Computational homogenization Tuijl, R. van (PhD 3) Parallelisation and multiscale reduced 12-2014 / 12-2018 order modelling
5.2 Computational and Experimental Micromechanics
Hernandez, H. (PhD 3) 09-2013 / 09-2017 Irani, N. (PhD 1) Large-strain discrete dislocation analysis 04-2011 / 03-2015 Mannheim, A. (PhD 3) Modelling and analysis of extreme 11-2014 / 11-2018 materials for energy applications Samantray, P. (PhD 3) Geometricall evolution of microstructure 11-2014 / 11-2018 In complex fibre materials Shafqat, S. (PhD 2) Stretching the limits in IC stretchability 02-2014 / 02-2018 Sharma, L. (PhD 2) 04-2015 / 04-2019
5.3 Damage, Fracture and Reliability
Bormann, F. (PhD 2) Understanding interface decohesion in 06-2014 / 06-2018 complex polycrystalline microstructures– towards tougher advanced high-strength steels Du, C. (PhD 3) From damage to fracture in dual-phase
steels: a focused experimental-numerical approach
09-2012 / 08-2016
Schormans, J. (PhD 2) Physics based modelling of failure in 06-2014 / 06-2018 textile composites under complex stress states
5.4 Microsystems
Pelt. S. van (PhD 3) Gas Sensor Window 09-2009 / 12-2016 M. van Riel (PhD 3) 3D vibrating microprobe 12-2010 / 06-2016
37
6. Postdocs:
Borodachenkova, M. (PD 1) 06-2015 / 06-2016 Bosco, E. (PD 3) A multiscale modelling study of the
hygro-mechanics paper 03-2013 / 03-2016
Chockalingam, K. (PD 3) 01-2015 / 01-2017 Krushynska, A. (PD 3) Towards development novel acoustic
metamaterials: a transient computational homogenization approach
03-2014 / 03-2016
7. Dissertations:
Name: Beers, P.R.M. van Title: Multiscale modelling of grain boundary plasticity Advisor: prof.dr.ir. M.G.D. Geers Co-advisor: dr.ir. V.G. Kouznetsova Date: 05-01-2015 Current position: Technologist at Philips Research Name: Beeck, J. van Title: Deformation-induced interface roughening and failure in polymer-
coated steel Advisor: prof.dr.ir. M.G.D. Geers Co-advisor: dr.ir. P.J.G. Schreurs Date: 07-04-2015 Current position: Principal researcher at Tata steel Name: Champion, A. Title: Local effective volume changes in fused silica induced by femtoscecond
laser irradiation Advisor: prof.dr.ir. J.M.J. den Toonder Co-advisor: prof.dr. Y. Bellouard Date: 26-01-2015 Current position: researcher at LASEA SA Name: Pina, J.C. Title: Elevated temperature thermo-mechanical behaviour of cast irons.
A numerical-experimental investigation Advisor: prof.dr.ir. M.G.D. Geers Co-advisor: dr.ir. V.G. Kouznetsova Date: 13-05-2015 Current position: Mechanical analyst at ASML
38
Name: Vossen, B.G. Title: Multiscale mechanics of delamination in stretchable electronics Advisor: prof.dr.ir. M.G.D. Geers Co-advisors: dr.ir. P.J.G. Schreurs dr.ir. O. van der Sluis Date: 25-06-2015 Current position: Consultant at Laboratory for Industrial Mathematics Eindhoven (LIME) Name: Maresca, F. Title: Multi-scale modleing of plasticity and damage of lath martensite in
multi-phase steels Advisor: prof.dr.ir. M.G.D. Geers Co-advisor: dr.ir. V.G. Kouznetsova Date: 26-11-2015 Current position: Postdoctoral Researcher at EPFL Name: Kooiman, M. Title: Collective dynamics of dislocations Advisor: prof.dr.ir. M.G.D. Geers Co-advisor: dr.sc.nat. M. Hütter Date: 10-12-2015 Current position: Design-engineer at ASML
8. Short description of subprogrammes related to research school EM 8.1 Multi-scale Mechanics & Structure-Property Modelling
Upscaling from microstructure towards engineering properties requires advanced methods to extract relevant information from small scales and reveal the emergent behaviour at larger scales. The subprogramme targets this goal through the development of advanced homogenisation and multi-scale approaches, with a challenging application perspective. This subprogramme plays a central role in the research portfolio and can be identified in most of the research projects. Among the topics addressed are:
multi-scale mechanics as a link between materials science and materials engineering: homogenisation theories and models, study of the collective behaviour of small-scale processes, structure-property relations for complex microstructures
multi-scale methods for lattice networks, e.g. based on an extension of the quasi-continuum method (applied to paper and electronic textile)
discrete-continuum transitions: from dislocation pile-ups to crystal plasticity
diffusionless phase transformations, e.g. martensitic transformations as used in TRIP steels and metastable steels
microstructure evolution: substructuring, patterning, self-organisation etc.
39
path or history dependency in material deformation
time-dependent mechanics of thin films used for systems-in-foil
8.2 Computational and Experimental Micromechanics
The ultimate performance of materials and high-tech microsystems originates from the mechanics at underlying characteristic length scales, at which microstructures play an intrinsic role. To achieve a comprehensive understanding of these phenomena, this subprogramme focuses on the development of advanced physical models, computational tools and state-of-the-art experimental techniques to study them at the micro-scale. Attention is given to the mechanics of different engineering phenomena that emerge from the micro-scale on the one hand and from the mechanics of microsystems for small-scale applications on the other hand. Special emphasis is given on flexible electronics applications such as rollable displays and roll-to-roll production of solar cells and organic light emitting diodes (OLEDs). The latter have great technologic and commercial value, while stretchable electronics has the potential to open up a realm of possible applications in or around the human body, such as sensitive prosthetic skin or neuron- or retina-interfaces, e.g., for control of epileptic attacks. In these devices, the functionality is delivered by integration of, often brittle, micro-electronic components into a compliant, often polymer, substrate in order to make the device flexible or even stretchable. A primary concern is the reliability, because the systems can be highly fragile and are subjected to large thermo-mechanical loading during manufacture and use. Among the topics addressed are:
modelling of the mechanics and physics of micron-scaled plasticity: dislocation dynamics, -plasticity problems, thin films, crystal plasticity
computational-experimental analysis of the mechanics of single phases and metallic polycrystals, including size effects: grain boundaries, grain size effects, orientation-texture evolution, strain gradient effects, surface grain effects, strain path effects
mechanics of microsystems, including MEMS, NEMS and substructured materials, size dependent properties
thermo-mechanical and hygroscopic deformation of polymer films used as a substrate for
flexible electronics
delamination of the copper electronic wiring from the rubber substrate in stretchable
electronics
development of global digital image correlation (DIC) and integrated DIC to bridge the experimental work in the multi-scale lab to the modelling work done in parallel
8.3 Damage, Fracture and Reliability
The lifetime and reliability of engineering components and devices at all length scales are governed by damage and fracture of their constituting materials and interfaces. This subprogramme develops the in-depth understanding of all the related failure phenomena, and provides powerful models and computational solution strategies, together with dedicated integrated numerical-experimental identification methods. This subprogramme focuses on quasi-brittle damage, ductile damage and interface damage. Among the topics addressed are:
advanced 3D continuum ductile damage models
numerical methods to nucleate and propagate 3D cracks from continuum damage fields
interfacial failure in systems-in-package
mechanics of failure in fibrous networks (paper, paperboard, electronic textile)
40
thermo-shock failure in ceramics
functional damage as the result of dynamic overstraining in brain tissue
8.4 Free-Boundary & Interface Problems
Many problems in science and engineering are characterized by a connection between disparate subsystems at a common boundary or, similarly, by a fundamental change in the behavior of a single system across an infinitesimally thin layer. Typical examples are dynamic and thermodynamic interactions between a fluid and a solid, the interaction between two distinct immiscible fluids, or the intrusion of a tumor into healthy tissue. Generally, the interface between the subdomains constitutes a free-boundary, i.e., it is not fixed, but its motion is interconnected with the (initial-)boundary-value problems on the adjacent subdomains. Interface and free-boundary problems pose fundamental challenges to numerical simulation methods, on account of the resolution requirements at the interface and/or the complicated interdependence between the boundary-value problems and their domain of definition. A central theme in the research of the MEFD group is the development and analysis of advanced numerical techniques for interface and free-boundary problems.
8.5 Computational Fluid-Structure Interaction
A particularly important class of interface problems is fluid-structure interaction. In accordance with the reductionistic approach that pervades modern science, the fields of fluid and solid mechanics have historically developed independently. In fluid-structure interaction, a proper understanding of both subsystems is required. In addition, the interface between the fluid and the structure introduces additional complications, on account of its free-boundary character and the nontrivial interconnection between the fluid and structure subsystems via boundary conditions. The disparity between the fluid and structure subsystems moreover generally reflects in a wide range of length and time scales in the aggregated problem. An important focal point of the group pertains to the development and analysis of efficient iterative solution techniques and advanced finite-element discretization methods for strongly-coupled large-displacement fluid-structure-interaction problems.
8.6 Microsystems
Trends in Microsystems science and technology are the ongoing miniaturization, increased function integration, adaptivity to environmental conditions, interaction and merging with biological materials, and low-cost manufacturing approaches. The mission of the Microsystems group is to carry out excellent scientific and technologically driven research that contributes to these developments. The concrete objectives are to develop microsystems design approaches and out-of-cleanroom micro-manufacturing technologies that are rapid and flexible. These are applied to realize active mechanical control in micro-fluidics, to create and study cells and organs on chips, and to develop advanced microsystems applications in collaboration with industrial partners. The group’s research is carried out in 4 subprogrammes. (1) Micro-manufacturing technologies, which forms the heart of the group. The focus is on out-of-cleanroom technologies such as laser micro-manufacturing, soft lithography, on-foil processing, and printing. (2) Active control in microfluidics: We develop and apply micro-actuators, responsive surfaces, and magnetic bead actuation systems, to realize functions in microfluidic systems. (3) Cells and organs on a chip: In collaboration with biological, biomedical, and clinical groups, we apply our microsystems to studying and understanding the behavior of cells, tissues, and organs. This work is aimed at learning about health and disease, and eventually developing
41
novel therapies and medicines. (4) Microsystems applications, which can be found in many areas. In this subprogramme, we work with industrial partners to develop relevant technologies for these applications, in medical devices, high precision metrology, flexible electronics, and advanced sensors and actuators.
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Arutinov, G., Mastrangeli, M., Smits, E.C.P., Heck, van, G., Toonder, den, J.M.J. & Dietzel, A.H. / Foil-to-foil system integration through capillary self-alignment directed by laser patterning. Journal of Microelectromechanical Systems, Vol.24(1), 2015, p. 126-133.
Arutinov, G., Mastrangeli, M., Heck, van, G., Lambert, P., Toonder, den, J.M.J., Dietzel, A.H. & Smits, E.C.P. / Gripping and self-alignment : a route towards autonomous heterogeneous assembly. IEEE Transactions on Robotics, Vol.31(4), 2015, p. 1033-1043. Ayas, C., Dautzenberg, L.C.P., Geers, M.G.D. & Deshpande, V.S. (2015). Climb-enabled discrete
dislocation plasticity analysis of the deformation of a particle reinforced composite. Journal of Applied Mechanics : Transactions of the ASME, 82(7):071007
Beeck, van, J.; Schreurs, P.J.G.; Geers, M.G.D. / Numerical-experimental assessment of roughness-induced metal-polymer interface failure. Mechanics of Materials, Vol. 80B, 2015, p. 234-245.
Beeck, van, J.; Breemen, van, L.C.A.; Schreurs, P.J.G.; Geers, M.G.D. / Preventing interface damage by pre-conditioning polymer-coated steels via rolling. International Journal of Solids and Structures, Vol. 58, 2015, p. 1-11.
Beers, van, P.R.M.; Kouznetsova, V.; Geers, M.G.D.; Tschopp, M.A.; McDowell, D.L. / A multiscale model of grain boundary structure and energy : from atomistics to a continuum description. Acta Materialia, Vol. 82, 2015, p. 513-529.
Beers, van, P.R.M.; Kouznetsova, V.; Geers, M.G.D. / Defect redistribution within a continuum grain boundary plasticity model. Journal of the Mechanics and Physics of Solids, Vol. 83, 2015, p. 243-262.
Beers, van, P.R.M.; Kouznetsova, V.; Geers, M.G.D. / Grain boundary interfacial plasticity with incorporation of internal structure and energy. Mechanics of Materials, Vol. 90, 2015, p. 69-82.
Beex, Lars; Peerlings, Ron; van Os, K.; Geers, Marc / The mechanical reliability of an electronic textile investigated using the virtual-power-based quasicontinuum method. Mechanics of Materials, Vol. 80, 01.2015, p. 52-66.
42
Blaysat, B.; Hoefnagels, J.P.M.; Lubineau, G.; Alfano, M.; Geers, M.G.D. / Interface debonding characterization by image correlation integrated with Double Cantilever Beam kinematics. International Journal of Solids and Structures, Vol. 55, 2015, p. 79-91.
Bosco, E.; Kouznetsova, V.G.; Geers, M.G.D. / Multi-scale computational homogenization–localization for propagating discontinuities using X-FEM. International Journal for Numerical Methods in Engineering, Vol. 102, No. 3-4, 2015, p. 496-527. Bosco, E.; Peerlings, R.H.J.; Geers, M.G.D. / Predicting hygro-elastic properties of paper sheets based on an idealized model of the underlying fibrous network. International Journal of Solids and Structures, Vol. 56-57, 2015, p. 43-52. Bosco, E.; Bastawrous, M.; Peerlings, R.H.J.; Hoefnagels, J.P.M.; Geers, M.G.D. / Bridging network properties to the effective hygro-expansivity of paper: experiments and modelling. Philosophical Magazine, Vol. 95, No. 28-30, 31.12.2015, p. 3385-3401. Bosco, E.; Peerlings, R.H.J.; Geers, M.G.D. / Explaining irreversible hygroscopic strains in paper : a multi-scale modelling study on the role of fibre activation and micro-compressions. Mechanics of Materials, Vol. 91, No. 1, 2015, p. 76-91. Dogge, Michael; Peerlings, R. H. J.; Geers, M. G. D. / Interface modeling in continuum dislocation transport. In: Mechanics of Materials, Vol. 88, 09.2015, p. 30-43. Dogge, Michael; Peerlings, Ron; Geers, Marc / Extended modelling of dislocation transport-formulation and finite element implementation. Advanced Modeling and Simulation in Engineering Sciences, Vol. 2, No. 1, 29, 01.12.2015. Du, Guansheng, Fang, Q. & den Toonder, Jaap / Microfluidics for cell-based high throughput screening platforms : a review. Analytica Chimica Acta, Vol.903, 2015, p. 36-50. Frimat, J.M.S., Xie, S., Bastiaens, A.J., Schurink, B., Wolbers, F., den Toonder, J.M.J. & Luttge, R. / Advances in 3D neuronal cell culture. Journal of Vacuum Science and Technology, B: Microelectronics and Nanometer Structures--Processing, Measurement, and Phenomena, Vol.33:06F902, 2015 Gao, K.; Dommelen, van, J.A.W.; Göransson, P.; Geers, M.G.D. / A homogenization approach for characterization of the fluid-solid coupling parameters in Biot’s equations for acoustic poroelastic materials. Journal of Sound and Vibration, Vol. 351, 2015, p. 251-267. Gao, Kun; van Dommelen, Hans; Göransson, P.; Geers, Marc / Computational homogenization of sound propagation in a deformable porous material including microscopic viscous-thermal effects. Journal of Sound and Vibration, Vol. 365, 17.03.2016, p. 119-133.
43
Gao, Y., Beerens, J., Reenen, van, A., Hulsen, M.A., Jong, de, A.M., Prins, M.W.J. & Toonder, den, J.M.J. / Strong vortical flows generated by the collective motion of magnetic particle chains rotating in a fluid cell. Lab on a Chip, Vol.15, 2015, p. 351-360.
Geus, de, T.W.J.; Peerlings, R.H.J.; Geers, M.G.D. / Microstructural topology effects on the onset of ductile failure in multi-phase materials – A systematic computational approach. International Journal of Solids and Structures, Vol. 67-68, 2015, p. 326-339. Geus, de, T.W.J.; Peerlings, R.H.J.; Geers, M.G.D. / Microstructural modeling of ductile fracture initiation in multi-phase materials. Engineering Fracture Mechanics, Vol. 147, 2015, p. 318-330. Goriely, A.; Geers, M.G.D.; Holzapfel, G.A.; Jayamohan, J.; Jerusalem, A.; Sivaloganathan, S.; Squier, W.; Dommelen, van, J.A.W.; Waters, S.L.; Kuhl, E. / Mechanics of the brain : perspectives, challenges, and opportunities. Biomechanics and Modeling in Mechanobiology, Vol. 14, No. 5, 2015, p. 931-965. Gorodetskyi, O.; Speetjens, M.F.M.; Anderson, P.D. / Eigenmode analysis of advective-diffusive transport by the compact mapping method. European Journal of Mechanics. B, Fluids, Vol. 49A, 2015, p. 1-11. Gursel, G., Frijns, A.J.H., Homburg, F.G.A. & Steenhoven, van, A.A. / A mass-spring-damper model of a pulsating heat pipe with a non-uniform and asymmetric filling. Applied Thermal Engineering, Vol.91(1), 2015, p. 80-90. Hartmann, X.H.M., van der Linde, P., Homburg, F.G.A., van Breemen, L.C.A., de Jong, A.M. & Luttge, R. / Insertion Process of Ceramic Nanoporous Microneedles by Means of a Novel Mechanical Applicator Design. Pharmaceutics, Vol.7(4), 2015, p. 503-522. Hernandez Velazquez, Hector Alonso; Massart, T. J.; Peerlings, R. H. J.; Geers, M. G. D. / Towards an unconditionally stable numerical scheme for continuum dislocation transport. Modelling and Simulation in Materials Science and Engineering, Vol. 23, No. 8, 085013, 12.2015, p. 1-24. Hoefnagels, J.P.M.; Tasan, C.C.; Maresca, F.; Peters, F.J.; Kouznetsova, V. / Retardation of plastic instability via damage-enabled micro-strain delocalization. Journal of Materials Science, Vol. 50, No. 21, 2015, p. 6682-6897. Hoefnagels, J.P.M.; Ruybalid, A.P.; Buizer, C.A. / A small-scale, contactless, pure bending device for In-situ testing. Experimental Mechanics, Vol. 55, No. 8, 2015, p. 1511-1524. Hosseini, S.; Remmers, J.J.C.; Verhoosel, C.V.; Borst, de, R. / Propagation of delamination in composite materials with isogeometric continuum shell elements. International Journal for Numerical Methods in Engineering, Vol. 102, No. 3-4, 2015, p. 157-179.
44
Irani, Nilgoon; Remmers, Joris; Deshpande, Vikram / Finite strain discrete dislocation plasticity in a total Lagrangian setting. Journal of the Mechanics and Physics of Solids, Vol. 83, 2015, p. 160-178. Kleinendorst, S.M.; Hoefnagels, J.P.M.; Verhoosel, C.V.; Ruybalid, A.P. / On the use of adaptive refinement in isogeometric digital image correlation. International Journal for Numerical Methods in Engineering, Vol. 104, No. 10, 07.12.2015, p. 944-962. Kooiman, M.; Hütter, M.; Geers, M.G.D. / Microscopically derived free energy of dislocations. Journal of the Mechanics and Physics of Solids, Vol. 78, 2015, p. 186-209. Kooiman, M.; Hütter, M.; Geers, M.G.D. / Effective mobility of dislocations from systematic coarse-graining. Journal of Statistical Mechanics : Theory and Experiment, Vol. 2015, P06005, 2015, p. P06005-1-23. Leuschner, M.; Fritzen, F.; Dommelen, van, J.A.W.; Hoefnagels, J.P.M. / Potential-based constitutive models for cohesive interfaces : theory, implementation and examples. Composites Part B: Engineering, Vol. 68, 2015, p. 38-50. Mastrangeli, M., Arutinov, G., Smits, E.C.P. & Lambert, P. / Modeling capillary forces for large displacements. Microfluidics and Nanofluidics, Microfluidics and Nanofluidics, Vol.18(4), 695-708.
McMillen, B.W. & Bellouard, Y. / On the anisotropy of stress-distribution induced in glasses and crystals by non-ablative femtosecond laser exposure. Optics Express, Vol.23(1), 2015, p. 86-100. Neggers, J., Blaysat, B., Hoefnagels, J.P.M. Geers, M.G.D. / On image gradients in digital image correlation, Int. J. Num. Meth. Engng. Vol. 105, (2015), 243–260 Neggers, J.; Hoefnagels, J.P.M.; Geers, M.G.D.; Hild, F.; Roux, S. / Time-resolved integrated digital image correlation. International Journal for Numerical Methods in Engineering, Vol. 103, No. 3, 2015, p. 157-182. Neggers, J.; Hoefnagels, J.P.M.; Sluis, van der, O.; Sedaghat, O.; Geers, M.G.D. / Analysis of the dissipative mechanisms in metal-elastomer interfaces. Engineering Fracture Mechanics, Vol. 149, 17.07.2015, p. 412-424. Neggers, J.; Hoefnagels, J.P.M.; Sluis, van der, O.; Geers, M.G.D. / Multi-scale experimental analysis of rate dependent metal-elastomer interface mechanics. Journal of the Mechanics and Physics of Solids, Vol. 80, 2015, p. 26-36. Nie, C., Frijns, A.J.H., Mandamparambil, R. & Toonder, den, J.M.J. / A microfluidic device based on an evaporation-driven micropump. Biomedical Microdevices, Vol.17(2), 47-2015, p. 1/12.
45
Nie, C., Frijns, A.J.H., Mandamparambil, R., Zevenbergen, M.A.G. & Toonder, den, J.M.J. / An evaporation based digital microflow meter. Journal of Micromechanics and Microengineering, Vol.25:11, 2015 Pina, J.C.; Kouznetsova, V.; Geers, M.G.D. / Thermo-mechanical analyses of heterogeneous materials with a strongly anisotropic phase: the case of cast iron. International Journal of Solids and Structures, Vol. 63, 2015, p. 153-166. Pina, J.C.; Kouznetsova, V.; van Maris, M.P.F.H.L.; Geers, M.G.D. / Microstructural model for the time-dependent thermo-mechanical analysis of cast irons. GAMM-Mitteilungen, Vol. 38, No. 2, 2015, p. 248-267. Poluektov, M.; Dommelen, van, J.A.W.; Govaert, L.E.; Geers, M.G.D. / Micromechanical modelling of reversible and irreversible thermo-mechanical deformation of oriented polyethylene terephthalate. Computational Materials Science, Vol. 98, 2015, p. 189-200. Remij, E.W.; Remmers, J.J.C.; Huyghe, J.M.R.J.; Smeulders, D.M.J. / The enhanced local pressure model for the accurate analysis of fluid pressure driven fracture in porous materials. Computer Methods in Applied Mechanics and Engineering, Vol. 286, 2015, p. 293-312. Ruybalid, A.P.; Hoefnagels, J.P.M.; Sluis, van der, O.; Geers, M.G.D. / Comparison of the identification performance of conventional FEM-updating and integrated DIC. International Journal for Numerical Methods in Engineering, 2015. Salvadori, A.; Grazioli, D.; Magri, M.; Geers, M.G.D.; Danilov, D.L.; Notten, P.H.L. / On the role of saturation in modeling ionic transport in the electrolyte of (Lithium ion) batteries. Journal of Power Sources, Vol. 294, 2015, p. 696-710. Salvadori, A.; Grazioli, D.; Geers, M.G.D.; Danilov, D.L.; Notten, P.H.L. / A multiscale-compatible approach in modeling ionic transport in the electrolyte of (Lithium ion) batteries. Journal of Power Sources, Vol. 293, 2015, p. 892-911. Vossen, B.G.; Sluis, van der, O.; Schreurs, P.J.G.; Geers, M.G.D.; Neggers, J.; Hoefnagels, J.P.M. / On the role of fibril mechanics in the work of separation of fibrillating interfaces. Mechanics of Materials, Vol. 88, 2015, p. 1-11. Wang, Y., Gao, Yang, Wyss, H.M., Anderson, P.D. & Toonder, den, J.M.J. / Artificial cilia fabricated using magnetic fiber drawing generate substantial fluid flow. Microfluidics and Nanofluidics, Vol.18(2), 2015, p. 167-174.
46
9.2 Books, chapters in book
Remmers, Joris; Verhoosel, Clemens; de Borst, René / Isogeometric analysis for modelling of
failure in advanced composite materials.
Numerical Modelling of Failure in Advanced Composite Materials. ed. / S.R. Hallett; P.P.
Camanho. 1. ed. Amsterdam : Elsevier, 2015. p. 309-329 (Woodhead Publishing Series in
Composites Science and Engineering).
9.3 Refereed proceedings
Cattarinuzzi, E., Lucchini, R., Gastaldi, D., Vena, P., Lorenzelli, L., Hoefnagels, J.P.M., / In-Situ
Experimental Characterization of Interfacial Toughness of Aluminum Thin Films on Polyimide
Substrates, 20th International Conference on Composite Materials (ICCM), Copenhagen, 19-24th
July 2015.
Dommelen, J. A. W. van, Poluektov, M., MacKerron, D., Govaert, L. E., Geers, M. G. D. /
Micromechanics of the thermo-mechanical behaviour of oriented semicrystalline polymer foils,
16th International Conference on Deformation, Yield and Fracture of Polymers, Kerkrade, The
Netherlands, 2015.
Hoefnagels, J.P.M. , Du, C., Geus, T.W.J. de, Peerlings, R.H.J., Geers, M.G.D. / A
Statistical/Computational/Experimental Approach to Study the Microstructural Morphology of
Damage, Chapter 8 in Fracture, Fatigue, Failure and Damage Evolution, Volume 8: Proceedings
of the 2014 Annual Conference on Experimental and Applied Mechanics; Eds.: A.M. Beese et al.,
p. 61–65 (2015); DOI: 10.1007/978-3-319-21611-9_8. Springer International Publishing.
Remmers, J.J.C.; van der Sluis, O. / A quantitative investigation of the competition between cohesive and adhesive fracture at interfaces. 4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), 3-5 June 2015, Cachan, France. 2015.
Ruybalid, A.P., Hoefnagels, J.P.M., Sluis, O. van der ,Geers, M.G.D. / Performance Assessment of Integrated Digital Image Correlation Versus FEM Updating, Chapter 2 in Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems Volume 9: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics; Eds.: S. Bossuyt et al., p. 11–15 (2015); DOI: 10.1007/978-3-319-21765-9_2 van der Sluis, O.; Vossen, B.G.; Neggers, J.; Hoefnagels, J.P.M.; Schreurs, P.J.G.; Geers, M.G.D. / High toughness fibrillating interfaces in stretchable electronics a multi-scale numerical and experimental analysis.. 4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), 3-5 June 2015, Cachan, France. 2015.
47
10 Overview of research input and output “Mechanics of Materials and Microsystems” related to EM, 2015
10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 9 10 3.3
Supporting staff 2) 2 2
PhD 3) 1 5 14 20 16
Post docs 1 3 4 3.2
Total 13 5 17 36 22,5
1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 53
Scientific publications: books, chapters in book 1
Scientific publications: refereed proceedings 6
PhD theses 7
* In cooperation with other EM-groups.
11. Keynote lectures and seminars
Dr.ir. J.A.W. van Dommelen
Dommelen, J. A. W. van, Poluektov, M., Govaert, L. E., Geers, M. G. D., Micromechanics of
the thermo-mechanical behaviour of oriented semicrystalline polymer foils, EMN Polymer
meeting, Orlando, Florida, USA, January 7-10, 2015 (Invited).
Dommelen, J. A. W. van, Micromechanics of Materials: from structure to properties,
Forschungszentrum Jülich, Jülich, Germany, April 24, 2015 (Seminar).
Dommelen, J. A. W. van, Poluektov, M., MacKerron, D., Govaert, L. E., Geers, M. G. D.,
Characterization and micromechanical modelling of the thermo-mechanical behaviour of
oriented semicrystalline polymer foils, 9th European Solid Mechanics Conference (ESMC),
Madrid, Spain, 2015 (Invited).
48
Dommelen, J. A. W. van, Poluektov, M., Sedighiamiri, A., Govaert, L. E., Micromechanics of semicrystalline polymers: towards quantitative predictions, Université Catholique Louvain-la-Neuve, 24 November, 2015 (Seminar).
Prof.dr.ir. M.G.D. Geers
M.G.D. Geers, B. Vossen, P.J.G. Schreurs, O. van der Sluis; From fibrils to toughness in
stretchable electronics interfaces: a multi-scale approach; EUROMECH Colloquium 559
"Multi‐scale computational methods for bridging scales in materials and structures",
Eindhoven, The Netherlands, February 23-25, 2015, Invited.
M.G.D. Geers, Size effects and crystal plasticity, IAP Summer school, KU Leuven, Belgium,
May 21-22, 2015, Invited.
M.G.D. Geers, F. Maresca, V.G. Kouznetsova; Unraveling the apparent ductility of
martensite: a computational micro-scale analysis; IV International Conference on
Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC),
Cachan, France, June 3-5th, 2015, Keynote.
M.G.D. Geers, A. Krushynska, B. Vossen, V.G. Kouznetsova, O. Van der Sluis,
Microfluctuations in Solid Mechanics: Small matters!, European Solid Mechanics
Conference, Madrid, July 6-10, 2015, Plenary.
M.G.D. Geers, A. Sridhar, V.G. Kouznetsova, A. Krushynska, Multi-scale mechanics of
dynamical metamaterials, PCM-CMM, Gdansk, September 7-11, 2015, Plenary.
M.G.D. Geers, Multi-scale mechanics & methods, Computational Multiscale Mechanics
School, Pre-congress school 8th International Congress of Croatian Society of Mechanics,
Opatija, Croatia, September 28th, 2015, Invited.
M.G.D. Geers, A. Sridhar, V.G. Kouznetsova, A. Krushynska, Scale transitions for locally
resonant acoustic metamaterials, IWCMM, Bochum, Germany, October 1-2, 2015, Plenary.
M.G.D. Geers, F. Maresca, V.H. Kouznetsova, On the apparent ductility of martensite
emerging from interlath retained austenite, MRS Fall meeting, Boston USA, November 30 –
December 4, 2015, Invited.
Dr.ir. J.P.M. Hoefnagels
Interface delamination characterization: in-situ testing and integrated image correlation,
Januari 8th 2015, seminar at LMT-Cachan, Paris, France
A multi-scale mechanical analysis of high-toughness metal-elastomer Interfaces, April 2th
2015, seminar at Université Blaise-Pascal, Clermont-Ferrand, France
49
Dr.ir. V.G. Kouznetsova
V.G. Kouznetsova, E. Bosco, M.G.D. Geers, Multi-scale computational homogenization of microscale localization towards macroscale X-FEM description, 13th United States National Congress on Computational Mechanics, USNCCM13, 26-30 July, 2015, San Diego, USA (keynote)
V.G. Kouznetsova, A. Sridhar, A. Krushynska, M.G.D. Geers, Transient computational homogenization for locally resonant metamaterials, 4th International Conference on Material Modelling, ICMM4, May 27-29, 2015, Berkeley, USA (invited)
V.G. Kouznetsova, P. van Beers, M.G.D. Geers, Grain boundary plasticity model incorporating grain boundary structure, energy and defect redistribution, Society of Engineering Science 52nd Annual Technical Meeting, October 26-28, 2015, Texas A&M University, USA (invited)
Dr.ir. R.H.J. Peerlings
Fracture initiation in multi-phase materials: a micromechanical approach. Invited lecture at IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), Cachan, France, June 2015.
Dimensional stability of paper sheets undergoing hygroscopic loading – a multiscale study. Seminar at Czech Technical University in Prague, Department of Civil Engineering, November 2015.
Dr.ir. J.J.C. Remmers
An Adaptive Isogeometric Continuum Element for the Analysis of Delamination in Composite Materials, Division of Material and Computational Mechanics, Department of Applied Mechanics, Chalmers University of Technology Göteborg, Sweden, November 2015.
CZM for the prediction of inter- and intra-granular cracks in polycrystalline silicon, The 2nd Workshop on Impact of mechanical and thermal loads on the long term stability of PV modules. Institute of Structural Analysis (ISD), Leibniz University, Hannover, Germany, February 2015.
Dr.ir. O. van der Sluis
O. van der Sluis, B.G. Vossen, J. Neggers, J.P.M. Hoefnagels, P.J.G. Schreurs, M.G.D. Geers. International Conference on Computational Fracture and Failure of Materials and Structures (CFRAC2015 – Cachan), ‘High toughness fibrillating interfaces in stretchable electronics a multi-scale numerical and experimental analysis’, 2015.
50
Prof. dr.ir. J.M.J. den Toonder
Biomimetic microfluidic control -Principles from naturetranslated into technology, invited lecture, Mini-Symposium "Microfluidic Flow Control For Medical Applications" (2015), Enschede, the Netherlands.
Integrating optics and microfluidics to automatically identify algae species in water samples, invited lecture, 1st Next Generation Analytical Platforms for Environmental Sensing Workshop (NAPES) (2015), Eindhoven, the Netherlands.
Microfab lab facilities for research at TU/e, invited lecture, Labtechnology 2015 (2015), Utrecht, the Netherlands.
Organs on Chips: in-vitro models applied to understand cancer, invited keynote lecture, European Congress and Exhibition on Advanced Materials and Processes (Euromat 2015) (2015), Warsaw, Poland.
Artificial cilia: biomimetic microfluidic flow manipulation, invited keynote lecture, European Congress and Exhibition on Advanced Materials and Processes (Euromat 2015) (2015), Warsaw, Poland.
Microfluidic devices for mechanical characterization of circulating cells, invited keynote lecture, Computational Fluid Dynamics in Medicine and Biology II (2015), Albufeira, Portugal.
Trends and Challenges in Engineering Mechanics, invited keynote lecture, 3TU Innovation & Technology Conference (2015), Rotterdam, the Netherlands.
Smart materials for micro-fluidic devices: applications to lab-on-a-chip and organ-on-a-chip, invited keynote lecture, 1st World Congress on Smart Materials (2015), Busan, South-Korea.
12. Memberships
12.1 Editorial boards international journals Dr.ir. J.A.W. van Dommelen
International Journal of Experimental and Computational Biomechanics
The Open Physics Journal Prof.dr.ir. M.G.D. Geers
Associate Editor of the European Journal of Mechanics A/Solids
Editorial Board of Computational Mechanics
Editorial Board of Computer Methods in Applied Mechanics and Engineering
Editorial Board of the Proceedings of the Royal Society A
Editorial Board of the International Journal of Multiscale Computational Engineering
Editorial Board of the Journal of Multiscale Modelling
Editorial Board of the Journal of Nanomechanics & Micromechanics
Editorial Board of the International Journal of Automotive & Mechanical Engineering
Editorial Board of Advanced Modeling and Simulation in Engineering Sciences
Editorial Board of the Journal of Coupled systems and Multiscale Dynamics
51
Editorial Board of the Journal of Mechanical Behaviour of Materials
Editorial Board of the Journal of Surfaces and Interfaces of Materials
Editorial Board of Plasticity and Mechanics of Defects
Editorial Panel of Advanced Materials Theory
Dr.ir. J.P.M. Hoefnagels
Associate Editor of Strain – an international journal for experimental mechanics
Editorial board of Strain – an international journal for experimental mechanics Dr.ir. V.G. Kouznetsova
Editorial Board of the Journal of Multiscale Modelling
Dr.ir. R.H.J. Peerlings
Fracture initiation in multi-phase materials: a micromechanical approach. Invited lecture at IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), Cachan, France, June 2015.
Dimensional stability of paper sheets undergoing hygroscopic loading – a multiscale study. Seminar at Czech Technical University in Prague, Department of Civil Engineering, November 2015.
Dr.ir. J.J.C. Remmers
Chairman of "5th ECCOMAS Thematic Conference on Mechanical Response of Composites", September 7-9, 2015, University of Bristol, UK.
Dr.ir. O. van der Sluis
Journal of Applied Mathematics
Prof.dr. ir. J.M.J. den Toonder
M of the Editorial Board of Lab on a Chip
Editorial Board of Micro- and Nanoelectromechanical Systems
12.2 International scientific committees
Prof.dr.ir. M.G.D. Geers:
Member of the Council of the European Mechanics Society
Chairman of the Euromech Mechanics of Materials EMMCC committee
52
Member of the General Assembly of the International Union of Theoretical and Applied Mechanics (IUTAM)
Member of the Editorial Committee of the Éditions de l'École polytechnique
Member of the GAMM research group on Multiscale Material Modelling
Member of the GAMM research group on Analysis of Microstructures
Technical Program Committee of the International Conference on Surface and Interface of Materials (SIM2015), Shanghai, China, January 29-31, 2015.
International Scientific Committee of the 12th French National Conference in Computational Structural Mechanics (CSMA), Giens, May 18-22, 2015.
Scientific Committee of the International Conference on Mechanics of Complex Solids and Fluids (ICMSF), Lille, May 17-22, 2015.
Scientific Committee of the 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete, May 25-27, 2015.
Scientific Board of the 4th International Conference on Material Modeling (ICMM), Berkeley, California, USA, May 27th- 29th, 2015.
Scientific Committee of the International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC), Paris, June 3-5, 2015.
International Advisory Committee of the 3rd International Conference on Mechanical Engineering Research (ICMER 2015), Kuantan, Pahang, Malaysia on August 18-19, 2015.
International Advisory Board of the joint 3rd Polish Congress of Mechanics and the 21st International Conference on Computer Methods in Mechanics (PCM-CMM-2015), Gdansk, September 8-11, 2015.
Scientific Board of the 8th International Congress of the Croatian Society for Mechanics, Opatija, Croatia, September 29 – October 2nd, 2015.
International Advisory Board of the 25th International Workshop on Computational Micromechanics of Materials (IWCMM), Bochum, Germany, October 1-2, 2015.
Scientific Committee of the Euromech colloquium on Multiscale analysis of the impact of microstructure on plasticity and fracture in interface-dominated materials, Houffalize, October 20-23, 2015
Dr.ir. J.P.M. Hoefnagels
Dutch representative of the ‘European Structural Integrity Society (ESIS)
Dr.ir. V.G. Kouznetsova
Chair of EUROMECH Colloquium 559 Multi-scale computational methods for bridging scales in materials and structures, 23-25 February, 2015, Eindhoven, The Netherlands
Dr.ir. R.H.J. Peerlings:
Member of International Scientific Committee of IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2015), Cachan, France.
Member of International Scientific Committee of 2nd International Conference on Damage Mechanics (ICDM2), Troyes, France.
53
Dr.ir. O. van der Sluis
Technical Committee Member of the IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE (2007–present).
Prof.dr.ir. J.M.J. den Toonder:
Technical Committee member of the microTAS Conference, Korea, October 2015.
12.3 National Science Foundation and Academies Prof.Dr.Ir. M.G.D. Geers
Member of the Board of Governors of FOM (Foundation for Fundamental Research on Matter)
Member of the KHMW
Fellow of the European Mechanics Society
Prof. dr. ir. J.M.J. den Toonder
Member of FOM scientific committee “Phenomenological Physics”
Member of the Scientific Board of hDMT 13. Awards, patents and NWO grants 14. International collaborations:
Group Geers, with van Dommelen, Hoefnagels, Kouznetsova, Peerlings, Remmers, van der Sluis
Prof Bob Svendsen, RWTH Aachen, Germany
Prof Vikram Deshpande, Cambridge University, UK (part-time at TU/e)
Prof Norman Fleck, Cambridge University, UK (Honorary doctor and Distinguished professor at TU/e since 2014)
Prof Samuel Forest, Ecole des Mines, Paris, France
Prof Esteban Busso, Ecole des Mines, Paris, France
Prof Raabe, Dr. Roters Max Planck Institut für Eischenforschung, Düsseldorf, Germany
Prof Göransson, KTH Stockholm, Sweden
Dr. L.H. Poh (National University of Singapore)
Prof. Francois Hild (LMT-Cachan, France)
Prof. Stephane Roux (LMT-Cachan, France)
Prof. Alan Needleman (University of North Texas, USA)
Prof. Thomas Pardoen (UCL, Belgium)
Dr. Jeroen van Kan (National University of Singapore)
Dr. Dmitry Terentyev (SCK-CEN, Belgium)
Prof. Felix Fritzen (Universität Stuttgart, Germany)
54
Prof. Pasquale Vena (Polytechnico di Milano, Italy)
Dr. Blaysat (Université Blaise Pascal, Clermont Ferrand, France)
Prof. Thierry Massart (Université Libre de Bruxelles, Belgium)
Dr. Martin Fagerströ m (Chalmers University, Göteborg, Sweden)
Group den Toonder
Prof. Kenny Breuer (Brown University, USA)
Prof. Xun Fang (Zheijang University, China)
Prof. Katsuaki Suganuma (Osaka University)
Prof. Donald Ingber (Harvard University)
Prof. Yves Bellouard (EPFL)
Prof. Philippe Renaud (EPFL)
55
3. RESEARCH DOCUMENTATION OF TU/e MULTISCALE ENGINEERING FLUID DYNAMICS
1. University/Department
Eindhoven University of Technology Department of Mechanical Engineering
2. Subprogrammes related to research school EM 2.1 Free-Boundary & Interface Problems 2.2 Computational Fluid-Structure Interaction 3. Group director
Prof.dr.ir. E.H. van Brummelen
4. Senior academic staff: name, position, research input in fte related to research school EM
Prof.dr.ir. E.H. van Brummelen Full Professor 0.3 Dr.ir. C.V. Verhoosel Assistant Professor 0.4 Total fte: 0.7
5. Running PhD-projects in 2015 related to research school EM:
5.1 Free-Boundary & Interface Problems Singh, N. (PhD 2) Phase-field modeling of hydraulic
fracturing using isogeometric analysis 06-2013 / 06-2017
Garikapati, H. (PhD 2) Uncertainty quantification in hydraulic fracturing processes
05-2015 / 05-2019
5.2 Computational Fluid-Structure Interaction
Wu, X. (PhD 2) Adaptive discretization techniques for diffuse-interactive tumor-growth models
02-2012 / 03-2016
Hoang, T. (PhD 2) Isogeometric finite cell analysis of fluid-structure interactions in biomechanics
11-2013 / 11-2017
6. Postdocs: - 7. Dissertations:
-
56
8. Short description of subprogrammes related to research school EM 8.1 Free-Boundary & Interface Problems
Many problems in science and engineering are characterized by a connection between disparate subsystems at a common boundary or, similarly, by a fundamental change in the behavior of a single system across an infinitesimally thin layer. Typical examples are dynamic and thermodynamic interactions between a fluid and a solid, the interaction between two distinct immiscible fluids, or the intrusion of a tumor into healthy tissue. Generally, the interface between the subdomains constitutes a free-boundary, i.e., it is not fixed, but its motion is interconnected with the (initial-)boundary-value problems on the adjacent subdomains. Interface and free-boundary problems pose fundamental challenges to numerical simulation methods, on account of the resolution requirements at the interface and/or the complicated interdependence between the boundary-value problems and their domain of definition. A central theme in the research of the MEFD group is the development and analysis of advanced numerical techniques for interface and free-boundary problems.
8.2 Computational Fluid-Structure Interaction
A particularly important class of interface problems is fluid-structure interaction. In accordance with the reductionistic approach that pervades modern science, the fields of fluid and solid mechanics have historically developed independently. In fluid-structure interaction, a proper understanding of both subsystems is required. In addition, the interface between the fluid and the structure introduces additional complications, on account of its free-boundary character and the nontrivial interconnection between the fluid and structure subsystems via boundary conditions. The disparity between the fluid and structure subsystems moreover generally reflects in a wide range of length and time scales in the aggregated problem. An important focal point of the group pertains to the development and analysis of efficient iterative solution techniques and advanced finite-element discretization methods for strongly-coupled large-displacement fluid-structure-interaction problems.
9. Refereed scientific publications related to research school EM
9.1 Refereed journals Akyildiz, A.C. Speelman, L., Nieuwstadt, H.A., Brummelen, E.H. van, Virmani, R., Lugt, A. van der,
Steen, A.F.W. van der, Wentzel, J.J. & Gijsen, F.J.H. (2015). The effects of plaque morphology and material properties on peak cap stress in human coronary arteries, Computer Methods in Biomechanics and Biomedical Engineering, 1–9.
Simsek, G., Wu, X., Zee, K.G. van der & Brummelen, E.H. van (2015). Duality-based two-level
error estimation for time-dependent PDEs: Application to linear and nonlinear parabolic equations, Computer Methods in Applied Mechanics and Engineering. 288 (2015), 83–109.
Opstal, T.M. van, Bauman, P.T., Prudhomme, S. & Brummelen, E.H. van (2015). Goal-oriented model adaptivity for viscous incompressible flows, Computational Mechanics, 1–10. Opstal, T.M. van, Brummelen, E.H. van, Zwieten, G.J. van (2015). A finite-element/boundary-element method for three-dimensional, large-displacement fluid–structure-interaction, Computer Methods in Applied Mechanics and Engineering. 284, 637–663.
57
Kleinendorst, S.M., Hoefnagels, J.P.M., Verhoosel, C.V. & Ruybalid, A.P. (2015). On the use
of adaptive refinement in isogeometric digital image correlation. International Journal for
Numerical Methods in Engineering, 104(10), 944–962.
Joneidi, A.A., Verhoosel, C.V., Anderson, P.D. (2015). Isogeometric boundary integral analysis of
drops and inextensible membranes in isoviscous flow. Computers and Fluids, 109, 49–66.
Verhoosel, C.V., Zwieten, G.J. van, Rietbergen, B. van & Borst, R. de (2015). Image-based goal-
oriented adaptive isogeometric analysis with application to the micro-mechanical modeling of
trabecular bone. Computer Methods in Applied Mechanics and Engineering, 284, 138–164.
Hosseini, S., Remmers, J.J.C., Verhoosel, C.V. & Borst, R. de (2015). Propagation of delamination
in composite materials with isogeometric continuum shell elements. International Journal for
Numerical Methods in Engineering, 102, 159–179.
9.2 Books, chapters in book -
9.3 Refereed proceedings
-
10 Overview of research input and output “Multiscale Engineering Fluid Dynamics” related to EM, 2015
10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 2 2 0.7
Supporting staff 2)
PhD 3) 4 4 3.2
Post docs
Total 2 4 6 3.9
1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
58
10.2 Output
Total
Scientific publications: refereed journals 8 (2*)
Scientific publications: books, chapters in book -
Scientific publications: refereed proceedings -
PhD theses -
* In cooperation with other EM-groups.
11. Keynote lectures and seminars
Prof.dr.ir. E.H. van Brummelen
E.H. van Brummelen, M. Abdel-Malik, G.J. van Zwieten, High-order Moment Closure Approximations of the Boltzmann Equation, The 18th International Conference on Finite Elements in Flow Problems, 16-18 March 2015, Taipei, Taiwan, Semi plenary.
E.H. van Brummelen, T.M. van Opstal, P.T. Bauman, S. Prudhomme, G.J. van Zwieten, A Coupled Finite-Element/Boundary-Element Method for Large-Displacement FSI, Advances in Computational Fluid–Structure Interaction and Flow Simulation, 11–13 May 2015, Istanbul, Invited
E.H. van Brummelen, M. Torrilhon, On Wellposedness for Moment Equations in Kinetic Theory. Analysis of boundary conditions for the R13 thermal subsystem, MathCCES Seminar, Aachen, 12 February 2015, Invited seminar
E.H. van Brummelen, T.M. van Opstal, G.J. van Zwieten. Isogeometric FE/BE Methods for Fluid-Membrane Interactions with B-Splines and Subdivision Surfaces. 3rd International Conference on Isogeometric Analysis, 1–3 June 2015, Trondheim, Norway, Invited
E.H. van Brummelen, M. Shokrpour-Roudbari, G.J. van Zwieten, G. Simsek, H.M.A. Wijshoff. Complex-Fluid-Solid Interaction based on the Navier-Stokes-Cahn-Hilliard Equations. Fluids and MHD Seminar, University of Leeds, 12 November 2015, Leeds, UK, Invited seminar
Dr.ir. C.V. Verhoosel
F. de Prenter, W.H. Wong, C.V. Verhoosel, G.J. van Zwieten, E.H. van Brummelen. Condition number estimation and improvement strategies for the isogeometric finite cell method. 3rd International Conference on Isogeometric Analysis, 1–3 June 2015, Trondheim, Norway, Invited
12. Memberships
12.1 Editorial boards international journals
Prof.dr.ir. E.H. van Brummelen:
Associate editor of Coupled Systems Mechanics
Guest editor special issue Comput. Math. Appl.
Guest editor special issue Int. J. Numer. Meth. Fluids
59
12.2 International scientific committees
Prof.dr.ir. E.H. van Brummelen:
Chairman of the Committee for Computational and Applied Mathematics of the European Community on Computational Methods in Applied
Director of the Eindhoven Multiscale Institute
12.3 National Science Foundation and Academies -
13. Awards, patents and NWO grants - 14. International collaborations:
Prof. Ferdinando Auricchio, University of Pavia, Italy
Prof. Alessandro Reali, University of Pavia, Italy
Prof. Pedro Diez, Polytechnic University of Catalonia, Barcelona, Spain
Prof. Manuel Torrilhon, RWTH Aachen University, Aachen, Germany
Prof. René de Borst, University of Glasgow, UK
Dr. Kris van der Zee, University of Nottingham, UK
Dr. Serge Prudhomme, Polytechnique Montreal, Canada
Dr. Sergei Zhuk, IBM Dublin research lab, Ireland
Dr. Timo van Opstal, NTNU / SINTEF, Trondheim, Norway
60
4. RESEARCH DOCUMENTATION OF THE GROUP
APPLIED MECHANICS AND DESIGN
1. University/Department Eindhoven University of Technology Department of Built Environment 2. Subprogrammes related to research school EM 2.1 Modelling of failure and deformation at various scales 2.2 Multi-physics modelling of structures and materials 2.3 Morphology and topology optimization 3. Group director
Prof.dr.ir. A.S.J. Suiker
4. Senior academic staff:
Dr. ir. H. Hofmeyer Associate professor 0.1 Prof.dr.ir. A.S.J. Suiker Full professor 0.2 Total fte: 0.3
5. Running PhD-projects in 2015 related to research school EM:
J.Liu, MSc (PhD2) Multi-scale modelling of granular materials
09-2013 / 09-2017
R. Luimes, MSc (PhD2) Thermal-hygral-mechanical modelling of wood for art preservation
04-2014 / 04-2018
F. Geng, MSc (PhD2) Improvement of efficiency and fatigue life of vertical-axis wind turbines
09-2014 / 09-2018
Z. Wang (PhD2) Advanced optimization of horizontal-axis wind turbine rotor baldes
09-2015 / 09-2019
6. Postdocs:
C. Gauvin, Dr. (PD) Experimental characterization of damage and deformation in art objects
10-2015 / 10-2017
61
7. Dissertations: related to research school EM:
----
8. Short description of sub programmes related to research school EM 8.1 Modelling of failure and deformation at various scales: Modelling failure and deformation of structures and materials at various scales for
understanding how small-scale (microscopic) information affects the behaviour at larger (meso and macroscopic) scales. The activities focus on the development of robust and accurate computational models that follow the physics of the problem closely, and obey rigorous mathematical principles characterizing the separate scales and their coupling.
8.2 Multi-physics modelling of structures and materials:
Modelling processes characterized by the interactive phenomena originating from multiple physical processes, such as thermo-mechanical processes that define the failure response of metals under varying temperatures, or thermal-chemical-mechanical processes that define the fracture behaviour of brittle coating systems under thermal oxidation.
8.3 Morphology and topology optimization: Studying structural shape, size, phase distribution and texture at the microscale (morphology) and structural shape and space at the macroscale (topology) for optimizing the mechanical properties and interactions of materials and structures.
9. Refereed scientific publications related to research school EM 9.1 Refereed journals Yadegari, S., Turteltaub, S. R., & Suiker, A. S. J. (2015). Generalized grain cluster method for Multiscale response of multiphase materials. Computational Mechanics, 56, 193-219. 10.1007/s00466-015-1167-9 Busso, E. P., Mühlhaus, H-B., Sluys, L. J., & Suiker, A. S. J. (2015). Preface. Philosophical Maga- zine, 95(28-30), 3053-3054. 10.1080/14786435.2015.1108028 Hofmeyer, H., & Davila Delgado, J. M. (2015). Coevolutionary and genetic algorithm based build ing spatial and structural design. Artificial Intelligence for Engineering Design, Analysis and Man- ufacturing, 29, 351-370. 10.1017/S0890060415000384 Hoenderkamp, H., Snijder, B., & Hofmeyer, H. (2015). Racking shear resistance of steel frames with corner connected precast concrete infill panels. Steel and Composite Structures, 19(6), 1403-1419. 10.12989/scs.2015.19.6.1403
62
9.2 Books, chapters in book
----
9.3 Refereed proceedings Boonstra, S., & Hofmeyer, H. (2015). Generation of a hierarchic structure via 3D-topology opti misation using black and white filtering. In Electronic proceedings of the 22nd EG-ICE workshop, 13-15 July 2015 Eindhoven, The Netherlands. (pp. 1-10). Eindhoven, The Netherlands: Eindhoven University of Technology, Design Systems Group.
Hofmeyer, H., & Davila Delgado, J. M. (2015). Strategies for building spatial and structural design generation and optimisation. In V. Popovic, A. Blackler, D-B. Luh, N. Nimkulrat, B. Kraal, & Y. Nagai (Eds.), iadsdr 2015 interplay, November 2-5, 2015, Brisbane, Australia, Proceedings. (pp. 946-962). Brisbane: Queensland University of Technology.
10. Overview of research input and output ‘Applied Mechanics and Design’ related to EM, 2014
10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 2 2 0.3
Supporting staff 2)
PhD 3) 4 4 3.2
Post docs
Total 2 4 6 3.5 1) Sources of financing: 1: University, 2: STW, NWO, FOM, 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc.
2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 4
Scientific publications: books, chapters in book
Scientific publications: refereed proceedings 2
PhD theses * In cooperation with other EM-groups.
11. Keynote lectures and seminars
Prof.dr.ir. A.S.J. Suiker
• Generalized grain cluster method for the multiscale response of multiphase materials, Catholic University of Leuven, upon invitation of Profs. G Lombaert and G. Degrande.
63
12. Memberships
12.1 Editorial boards international journals
Prof.dr.ir. A.S.J. Suiker:
• Guest editor of “Philosophical Magazine” • Member of editorial board “Journal of Composite Materials” • Member of editorial board “The Open Industrial and Manufacturing Engineering Journal” • Member of editorial board “Recent Patents on Materials Science” • Member of editorial board “Journal of Mechanics and MEMS”
• Member of editorial board “Heron”
12.2 International scientific committees Prof.dr.ir. A.S.J. Suiker:
• Board member of the “Granular Materials Technical Committee” of the ASCE • Member of EUROMECH (European mechanics society)
12.3 National Science Foundation and Academies ---- 13. Awards, patents and NWO grants ---- 14. International collaborations: ----
64
5. RESEARCH DOCUMENTATION OF THE GROUP ANALYSIS SCIENTIFIC COMPUTING AND
APPLICATIONS (CASA)
1. University/Department Eindhoven University of Technology Department of Mathematics and Computer Science 2. Subprogrammes related to research school EM 2.1 Scientific Computing 2.2 Applied Analysis 3. Group director Prof.dr.ir. B. Koren Prof.dr. M.A. Peletier 4. Senior academic staff:
Koren, Prof.dr.ir. B Full Professor 0.2 Muntean, Dr.habil. Assistant professor 0.2 Peletier, Prof.dr. M.A. Full professor 0.2 Total fte: 0.6
5. Running PhD-projects in 2015 related to research school EM: 5.1 Scientific Computing and Applied Analysis
6. Postdocs: ---
Lungten, S. (PhD2) Indefinite linear systems 07-2012 / 07-2016 Zisis, I. (PhD2) Comparison between hypervelocity impact
of particles and pulsed laser thermal impact models in glue bonded laminates under cryogenic conditions
04-2011 / 03-2015
Vromans, A. (PhD2) Theoretical estimates of heat losses in
geothermal wells
06-2014 / 05-2018
65
7. Dissertations: Name: Meurs, P.J.P. van Title: Discrete-to-continuum limits in variational models describing interacting dislocations Advisor: Prof.dr. M.A. Peletier Co-advisor: Dr.habil. A. Muntean Date: 16 September 2015 Current position: Kanazawa University, Japan
8. Short description of sub programmes related to research school EM
8.1 Scientific Computing
The main emphasis in this program is on analysis and numerical simulation of problems arising
in technology. Research is often induced by specific applications, yet being seen as part of a
larger area where mathematical tools and in particular numerical methods can be applied.
Hence both fundamental (numerical) research and applying the results to specific applications
are typical for Scientific Computing. The following areas specify the actual research:
8.1.1 Ordinary Differential Equations and DAE
Problems that exhibit an evolutionary character will result in ODE after spatial discretization.
Moreover problems in control and mechanics often lead to such equations more directly. Quite
often they are coupled with some (algebraic) constraint equations, resulting in DAE. Matters like
stability and accuracy of numerical methods still provide for important questions. Co-operation
exists with the TU/e-department of Mechanical Engineering.
Related to research theme “Computational Mechanics”.
8.1.2 Large Scale System Solving
In solving partial differential equations numerically, one encounters complex larger (non) linear
systems which exhibit a sparsity structure. In order to be able to solve them one need special
iterative solvers, like multigrid. In this area one can also often employ parallel architectures
fruitfully. Co-operation exists with TNO-TPD and the TU/e-department of Computer Science.
Related to research theme “Computational Mechanics”.
8.1.3 Modelling and Finite Element Applications
Although there exists a variety of FEM packages, it is often necessary to tailor methods for
specific problems. Further development and improving them is a core activity. A particular
aspect is the visualization, which is increasingly important due to the ever increasing complexity
of problems to be solved.
Related to research theme “Computational Mechanics”.
66
8.1.4 Boundary Element Methods and Approximation
The research on BEM is concentrating on the quality of approximations of non-homogeneous
problems. In particular it is investigated how various basic approximation methods like radial
basis functions lead to convergence and therefore efficient methods. Related to research theme
“Computational Mechanics”.
8.1.5 Wave Analysis for lithography
Analysis of diffraction gratings that are used to determine the position of a wafer in a wafer
stepper. Numerical methods like RCWA (Rigorous Coupled-Wave Analysis) are investigated to
solve these equations in a stable and accurate way. New software tools will be developed for
sensors that have the improved RCWA algorithm incorporated.
Related to research theme “Computational Mechanics”.
8.2 Applied Analysis
The main emphasis in this program is on mathematical analysis of technological problems.
Research is often fostered by specific applications, after which it may trigger more fundamental,
and thus more generally applicable research:
8.2.1 Mathematical Methods in Continuum Physics
Slow viscous flow of polymeric melts: considered is the mathematical simulation of manufacturing processes for polymers such as fiber spinning, extrusion and injection moulding. These processes are considered as slow viscous (Stokes-) flows. The polymeric melts are described as nonlinear thermoviscoelastic fluids. Analytical and numerical evaluation of the resulting system of partial differential equations is looked for.
Analysis of dislocation structures in crystal lattices: Dislocations are the carriers of microscopic plastic deformation. In this project we develop rigorous mathematical methods for the upscaling of a large number of such dislocations, with the aim of constructing a rigorous derivation of mesoscopic crystal-plasticity models.
8.2.2 Fundamental Analysis of (Non-Linear) Evolution Problems
Our research in functional analysis is concentrated on evolution equations. An inspiring source
of inspiration are non-linear evolution equations arising from free boundary value problems in
quasi-stationary fluid dynamics (Stokes flow, Hele-Shaw flow, polymer flow).
8.2.3 Industrial Mathematics
Problems and questions from industry.
All subprograms within 8.2 are related to research theme “Mechanics of Materials”.
67
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Aiki, T. & A. Muntean (2015). Large-time behavior of a two-scale semilinear reaction-diffusion
system for concrete sulfatation. Mathematical Methods in the Applied Sciences, 38(7), 1451-
1464.
Cirillo, E.N.M., O. Krehel, A. Muntean & R. van Santen (2015). Residence time estimates for
asymmetric simple exclusion dynamics on strips. Physica A. Statistical Mechanics and its
Applications, 442, 436-457.
Corbetta, A., A. Muntean & K. Vafayi (2015). Parameter estimation of social forces in crowd
dynamics models via a probabilistic method. Mathematical Biosciences and Engineering, 12(2),
337-356.
Evers, J.H.M., S.C. Hille & A. Muntean (2015). Mild solutions to a measure-valued mass evolution
problem with flux boundary conditions. Journal of Differential Equations, 259(3), 1068-1097.
Evers, J.H.M., S.C. Hille & A. Muntean (2015). Modelling with measures: approximation of a
mass-emitting object by a point source. Mathematical Biosciences and Engineering,12(2), 357-
373.
Fokkema, J., E. Bernard, P. de Bont, F. den Hollander, C. Kloeditz, B. Koren, J. Koster, J.K. Lenstra,
I. Moerdijk, G. Timmer & N. Verhoef (2015). Een Deltaplan voor de Nederlandse wiskunde,
Nieuw Archief voor Wiskunde, vol. 5/16, pp. 265–267.
Ijioma, E.R., A., Muntean & T. Ogawa (2015). Effect of material anisotropy on the fingering
instability in reverse smouldering combustion International Journal of Heat and Mass Transfer,
81, 924-938.
Krehel, O., A. Muntean & P. Knabner (2015). Multiscale modeling of colloidal dynamics in porous
media including aggregation and deposition. Advances in Water Resources, 36, 209-216.
Zisis, I., R. Messahel, A. Boudlal, B. van der Linden & B. Koren (2015). Validation of robust SPH
schemes for fully compressible multiphase flows, The International Journal of Multiphysics, vol.
9, pp. 225–234.
Zisis, I., B. van der Linden, C. Giannopapa & B. Koren (2015). On the derivation of SPH schemes
for shocks through inhomogeneous media, The International Journal of Multiphysics, vol. 9, pp.
83–100.
68
9.2 Books, chapters in book
Muntean, A. (2015). Continuum Modeling. An Approach through Practical Examples, Springerbriefs in
Applied Sciences and Technology- Mathematical Methods, Berlin, Heidelberg
9.3 Proceedings
Kumar, N., J.H.M. ten Thije Boonkkamp & B. Koren (2015). A sub-cell discretization method for
the convective terms in the incompressible Navier-Stokes equations, Proceedings Spectral and
Higher Order Methods for Partial Differential Equations (ICOSAHOM), Salt Lake City, 2014,
Lecture Notes in Computational Science and Engineering, vol. 106, pp. 295–303 (R.M. Kirby, M.
Berzins and J.S. Hesthaven, eds.), Springer.
10 Overview of research input and output ‘CASA’ related to EM, 2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 3 3 0.6
Supporting staff 2)
PhD 3) 3 3 2.4
Post docs
Total 3 3 0 6 3.0
1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 10
Scientific publications: chapters in book 1
Scientific publications: proceedings 1
PhD theses 1
11. Keynote lectures and seminars
Prof.dr.ir. B. Koren:
A finite-element method for the full viscoresistive MHD equations, application to tokamak plasma dynamics, Frontiers in Computational Physics, June 2-5, 2015, Zürich.
Film blowing modeling to enhance film properties prediction, ICIAM 2015, August 10-14, 2015, Beijing.
69
Shock propagation through inhomogeneous materials with the SPH numerical method, ICIAM 2015, August 10-14, 2015, Beijing.
About Navier-Stokes, its mathematics millennium problem, turbulence and tokamak plasmas, guest lecture KU Leuven, October 6, 2015, Leuven.
Explicit and implicit Runge-Kutta methods for incompressible Navier-Stokes, guest lecture KU Leuven, October 6, 2015, Leuven.
Dr.habil. A. Muntean:
Capturing secondary nucleation effects in Becker-Doering interactions: the homogenization route, Mathematics an Applications Sussex Seminar, Department of Mathematics, University of Sussex, UK, February 19, 2015
On integration theory, Karlstad University, February 12, 2015, Sweden Mathematician’s view on multiscale analysis: a modeling trip through smoldering
combustion and collagen networks, talk in the seminar of the research group INTERACT, Karlstad University, Sweden, November 2, 2015
Prof.dr. M.A. Peletier:
Stochastic origins of energies and gradient flows: a modelling guide, Winter School tutorial, January 21, Bonn
Exact crystallization in a block copolymer model, May 19, Rome
Onsager Reciprocity, Gradient Flows, and Large Deviations, July 7, Hilvarenbeek
Variational convergence for the analysis of boundary layers in dislocation pileups, May 4, Bonn
Open problems in the upscaling of dislocations, December 7, London
12. Memberships
Prof.dr.ir. B. Koren:
NWO-committee Deltaplan Wiskunde.NL
program committee Shell-NWO/FOM program Computational Sciences in Energy Research
board EURANDOM
jury Stieltjes Prize for best PhD thesis in mathematics in the Netherlands
computational science board Lorentz Center
steering committee Werkgemeenschap Scientific Computing
board of project leaders J.M. Burgerscentrum, Research School for Fluid Mechanics
CFD Committee of European Community on Computational Methods in Applied Sciences
steering committee STW-Perspectief program Excellence in Uncertainty Reduction of Offshore Wind Systems
steering committee STW-Perspectief program Sloshing of Liquefied Natural Gas
committee Research Assessment Mathematics 2009-2015
committee Research Assessment Computer Science 2009-2015
70
Prof.dr. M.A. Peletier:
Member of the board of NDNS+
Member of TOP
12.1 Editorial boards international journals
Prof.dr.ir. B. Koren:
Journal of Computational Physics
Mathematics and Computers in Simulation
Prof.dr. M.A. Peletier:
Associate editor IMA Journal of Applied Mathematics
Editor European Journal of Applied Mathematics
Editor Mathematics in Industry Case Studies
12.2 International scientific committees
---
13. Awards, patents and NWO grants --- 14. International collaborations:
---
71
6. RESEARCH DOCUMENTATION OF THE CHAIR OF AEROSPACE STRUCTURES AND COMPUTATIONAL MECHANICS (ASCM)
1. University/Department
Delft University of Technology Faculty of Aerospace Engineering
2. Subprogrammes related to research school EM
2.1 Structural tailoring, design and optimization 2.2 Stability of thin-walled structures 2.3 Advanced computational methods for structural and functional materials 2.4 Lightweight composite structures 2.5 Smart structures 3. Group director
Prof. dr. C. Bisagni 4. Senior academic staff: name, position, research input in fte related to research school EM
Prof. dr. C. Bisagni Full Professor 0.4 Dr. M.M. Abdalla Associate Professor 0.4 Dr. ir. R. de Breuker Assistant Professor 0.2 Dr. C. Kassapoglou Associate Professor 0.2 Dr. S. Turteltaub Associate Professor 0.4 Dr. ir. S. Shroff Assistant Professor 0.1 Dr. ing. M. Ruess Assistant Professor 0.3*
Total fte: 2.0 *Prorated 0.4 fte (Jan-Sept 2015)
5. Running PhD-projects in 2015 related to research school EM:
Anusuya Ponnusami, S. (PhD 3) Self-healing thermal barrier coatings
10-2011 / 09-2016
72
Brandsen, Jaco, MSc (PhD 1) Shape optimization for dynamic
fluid-structure interaction
problems
08-2014 / 08-2018
Duckitt, S., MSc (PhD 3) Multidisciplinary optimization of an impacted fan blade
04-2013 / 04-2017
Esrail, F., MSc (PhD 3) Low velocity impact damage:
Damage creation and effect on
residual strength
01-2014 / 01-2018
Ferede, Ir. E. (PhD 3) Passive-stall controlled wind turbine rotors
10-2011 / 09-2016
Gillebaart, E., MSc (PhD 3) Simultaneous shape and stiffness aeroelastic optimization of composite wings
04-2013 / 04-2017
Guo, Y., MSc (PhD 3) Isogeometric analysis and design of layered composites
09-2011 / 01-2016
Hegberg, Ir. T. (PhD 3) Aeroelastic design of wind turbine blades
09-2009 / 12-2016
Jovanov, K., MSc (PhD 3) Multifidelity aeroelastic analysis and design of composite airliner wings
10-2013 / 10-2017
Krishnasamy, JP., MSc (PhD 3) Lifetime analysis of self-healing thermal barrier coatings
02-2014 / 02-2018
Peeters, D., MSc (PhD 3) Optimisation of manufacturable variable stiffness, variable thickness laminates
02-2013 / 02-2017
Rajpal, D. (PhD 3) Optimisation of composite wings including certification loads
03-2013 / 03-2017
Wang, Z., MSc (PhD 3) Isogeometric analysis and optimization of time-dependent problems
09-2011 / 01-2016
Werter, N., MSc (PhD 3) Aeroelastic shape and stiffness optimization using isogeometric analysis
09-2012 / 09-2016
Zheng, W., MSc (PhD 3) Analysis of impact damage tolerance of non-conventional AP-PLY laminates
11-2011 / 05-2016
Zhi, H., MSc (PhD 3) Large-scale optimization of composites structures under stress constraints
09-2014 / 09-2018
6. Postdocs:
Sodja, J. AGILE, EU 06-2015 / 12-2017 Wang, D INWIND EU, 11-2013 / 05-2016 Liang, K DESICOS, EU 10-2013 / 02-2015
73
7. Dissertations:
Name: Sourena Yadegari Varnamkhasti Title: Multiscale thermomechanical analysis of multiphase materials Advisor: Prof.dr. ir. Rinze Benedictus Co-advisor: Dr. Sergio Turteltaub Co-advisor: Dr.ir. Akke Suiker Date: 2015, Dec 06 Current position: Continental AG Name: Lars Bernhammer Title: Smart wind turbine: analysis and autonomous flap Advisor: Prof.dr. ir. Gijs van Kuik Co-advisor: Prof. Moti Karpel Co-advisor: Dr.ir. Roeland De Breuker Date: 2015, Oct 12 Current position: Siemens Wind Power Name: Erwin van Solingen Title: Control design for two-bladed wind turbines Advisor: Prof. dr.ir. M. Verhaegen Co-advisor: Dr.ir. J.W. Wingerden Co-advisor: Dr.ir. Roeland De Breuker Date: 2015, Sep 29 Current position: Postdoctoral researcher TUD
8. Short description of subprogrammes related to research school EM 8.1 Structural tailoring, design and optimization
The demands of high-performance, structural integrity, durability, low weight, and minimum cost pose an important challenge to structural designers. New materials may assist in satisfying some of these demands, but at the same time give rise to significant new problems for the designers. Furthermore the structural design can no longer be seen as an isolated activity, but must play its part in a multi-disciplinary approach to the design of the aircraft or spacecraft as a whole. The traditional approach to design is no longer adequate unless it can be supplemented by a numerical, computer-based approach in which the trade-off between conflicting design requirements can be quantified, and many more alternatives evaluated. Optimization plays an important role in this process, by providing a tool to identify the active design constraints and to steer the design towards some required goal such as minimum weight or cost. The goal of the research efforts in this area is the development of efficient and robust design and optimization tools for a variety of challenging structural design problems, which meet the needs that industry is facing.
The following topics are included in this sub-program:
Development of design and optimization procedures for specific structural design problems; Theoretical optimization including multi-level procedures and optimization of structural shape and layout;
74
Tailoring of advanced fiber-reinforced composite structures; Design and optimization of actively sensed and actuated structures. 8.2 Stability of thin-walled structures
In modern designs, which are often obtained by use of one of the structural optimization codes and which may be of new high strength materials such as advanced composites, structural response is often dictated by the stability and vibration behavior. This is due to the drive for achieving lightweight structures which result in thin-walled constructions. Such structures are sensitive to imperfections and display nonlinear response characteristics. This implies the need to investigate and understand the response characteristics of thin-walled structures under different loading conditions by carrying out extensive numerical calculation and/or experimental validation. A key issue is the development of fast and accurate analysis capabilities for thin-walled structures, incorporating all the theoretical knowledge accumulated in the last decades through intensive research in the aerospace, nuclear, and offshore fields, and making efficient use of the currently available interactive and (super-) computing facilities. Part of the ongoing thin-walled structures research is therefore concerned with the buckling, post-buckling and dynamic stability behavior of shells. The goal of the research efforts in this area is the availability of improved design criteria and the necessary analysis tools. The following topics are included in this sub-program:
Theoretical, numerical, and experimental studies of the collapse behavior and nonlinear behavior of composite panels and shells under static and dynamic loading; Development of an International Imperfection Data Bank and DISDECO (Delft Interactive Shell DEsign COde); Development of efficient semi-analytical and Finite Element based tools (reduced-basis methods) for the nonlinear analysis of slender and thin-walled composite structures. 8.3 Advanced computational methods for structural and functional materials
A wide variety of challenging problems in aerospace engineering cannot be satisfactorily solved using the traditional finite element method based on Lagrange polynomials. Limitations of the traditional FEM are related to its high computational cost in complex systems and/or its inability to model relevant features in the problems. The sub-program on advanced computational methods focuses on the development of novel computational methodologies intended to address the shortcomings of the traditional FEM. One main thrust in this program pertains to the area of Isogeometric Analysis, which provides a seamless connection between objects created in CAD software and the corresponding analysis. This computational approach streamlines the design process and supports the activities in other research sub-programs. A second focus point is the development of computationally-efficient Multiscale Analysis algorithms that relate the microscopic behavior of materials and systems to their effective (macroscopic) response. Both concurrent and hierarchical multiscale approaches are used for advanced material modelling and solution of coupled problems. The following topics are included in this sub-program:
Isogeometric analysis and design of composite turbine blades and shells
Isogeometric analysis of fluid-structure problems
Multiscale simulations of multiphase steels
Lifetime predictions of self-healing thermal barrier coatings used in aeroengines
75
8.4 Lightweight composite structures
Increased use of composite materials in aerospace, automobile, shipping, and civil engineering structures has revealed several areas where improved understanding of the performance of these structures under mechanical loading is required in order to decrease their weight further or tune their performance more accurately to specific requirements. Relevant requirements are frequency response, crash absorption capability, and geometric stability under thermomechanical loads. Work is continuing in the areas of damage tolerance and fatigue of composite structures. Quasi-static finite element-based modeling of impact of monolithic laminates and grid stiffened structures showed that a combination of failure criteria for fiber failure and a critical energy release rate calculation for delamination in a progressive failure model gives good accuracy in the extent and type of damage caused during low speed impact. Different models are used for the residual stiffness and strength of the damaged material. The method is extended to compression after impact and comparison with published results shows very good agreement for most quasi-isotropic laminates. The following topics are included in this sub-program:
Use of advanced physics-based failure criteria to predict onset of failure during impact
Progressive failure with continuous updating of strength and stiffness of fibers and matrix for impact damage and fatigue analysis
Use of failure criterion in finite element modeling of the impact event in grid-stiffened structures
Experimental verification of analytical predictions for compressive failure of composite grid-stiffened structures with damage.
Use of degree of bonding to predict the quality of laminates produced using automated manufacturing techniques in composites with FEM
Experimental validation of interlaminar shear strength of laminates produced using automated tape laying
8.5 Smart structures
Smart Structures may very well lead the way to the next breakthrough and major technological advancements in aerospace. Applying smart structures to aerospace engineering requires a new way of thinking in terms of integration as well as multidisciplinarity and multifunctionality. The focus of the smart structures research at ASCM is dedicated towards solving the design challenge that is posed by smart structures because of their multidisciplinarity and multifunctionality. Furthermore research efforts are dedicated towards practical solutions for smart structures. The goal is to develop concepts starting from initial ideas all the way to proof of concept in a realistic environment like a wind tunnel of a large-scale UAV. The following topics are included in this sub-program:
Numerical aeroelastic analysis and design of smart structures
Concept development and hardware of morphing structures
Wind tunnel experiment of smart structures
Active control and performance optimisation using smart structures
76
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Abramovich, H & Bisagni, C (2015). Behavior of curved laminated composite panels and shells
under axial compression. Progress in Aerospace Sciences, 78(October), 74-106.
Bisagni, C & Vescovini, R (2015). A fast procedure for the design of composite stiffened panels.
The Aeronautical Journal, 119(1212), 185-201.
Bisagni, C (2015). Composite cylindrical shells under static and dynamic axial loading: An
experimental campaign. Progress in Aerospace Sciences, 78(October), 107-115.
Bisagni, C (2015). Overview of the DAEDALOS project. Progress in Aerospace Sciences,
78(October), 1-7.
Bronstein, M, Feldman, E, Vescovini, R & Bisagni, C (2015). Assessment of dynamic effects on
aircraft design loads: The landing impact case. Progress in Aerospace Sciences, 78(October), 131-
139.
Friedrich, L, Loosen, S, Liang, K, Ruess, M, Bisagni, C & Schroder, KU (2015). Stacking sequence
influence on imperfection sensitivity of cylindrical composite shells under axial compression.
Composite Structures, 134(December), 750-761.
Fu, X , Ricci, S & Bisagni, C (2015). Minimum-weight design for three dimensional woven
composite stiffened panels using neural networks and genetic algorithms. Composite Structures,
134(December), 708-715.
Guo, Y & Ruess, M (2015). A layerwise isogeometric approach for NURBS-derived laminate
composite shells. Composite Structures, 124(June), 300-309.
Guo, Y & Ruess, M (2015). Weak Dirichlet boundary conditions for trimmed thin isogeometric
shells. Computers & Mathematics with Applications, 70(7), 1425-1440.
Liang, K, Zhang, Y, Sun, Q & Ruess, M (2015). A new robust design for imperfection sensitive
stiffened cylinders used in aerospace engineering. Science China Technological Sciences, 58(5),
796-802.
Ludwig, T, Doreille, M, Merazzi, S, Vescovini, R & Bisagni, C (2015). Dynamic finite element
simulations of composite stiffened panels with a transverse-isotropic viscoelastic energy
dissipation model. Progress in Aerospace Sciences, 78(October), 30-38.
77
Peeters, DMJ, Baalen, D van & Abdallah, M (2015). Combining topology and lamination
parameter optimisation. Structural and Multidisciplinary Optimization: computer-aided optimal
design of stressed solids and multidisciplinary systems, 52(1), 105-120.
Peeters, DMJ, Hesse, S & Abdalla, MM (2015). Stacking sequence optimisation of variable
stiffness laminates with manufacturing constraints. Composite Structures, 125(July), 596-604.
Ponnusami, SA, Turteltaub, SR & Zwaag, S van der (2015). Cohesive-zone modelling of crack
nucleation and propagation in particulate composites. Engineering Fracture Mechanics,
149(November), 170-190.
Rooij, R de & Abdalla, MM (2015). A finite element interior-point implementation of tension field
theory. Computers & Structures, 151, 30-41.
Shroff, S & Kassapoglou, C (2015). Progressive failure modelling of impacted composite panels
under compression. Journal of Reinforced Plastics & Composites, 34(19), 1603-1614.
Vescovini, R & Bisagni, C (2015). A procedure for the evaluation of damping effects in composite
laminated structures. Progress in Aerospace Sciences, 78(October), 19-29.
Vescovini, R & Bisagni, C (2015). Semi-analytical buckling analysis of omega stiffened panels
under multi-axial loads. Composite Structures, 120(February), 285-299.
Wang, ZP & Turteltaub, SR (2015). Isogeometric shape optimization for quasi-static processes.
International Journal for Numerical Methods in Engineering, 104(5), 347-371.
Yadegari, S, Turteltaub, SR & Suiker, ASJ (2015). Generalized grain cluster method for multiscale
response of multiphase materials. Computational Mechanics, 56(2), 193-219.
Proceedings:
Bernhammer, LO, De Breuker, R & Kuik, GAM van (2015). Aeroelastic time-domain simulation of
SNL Smart rotor experiment. In s.n. (Ed.), Proceedings of the 33rd wind energy symposium (pp. 1-
10). Reston: AIAA.
Bernhammer, LO, Navalkar, ST, Sodja, J, Breuker, R de & Karpel, M (2015). Experimental and
numerical study of an autonomous flap. In S Kuzmina (Ed.), Proceedings of the International
Forum on Aeroelasticity and Structural Dynamics (pp. 1-18). IFASD.
Bernhammer, LO, Navalkar, ST, Sodja, J, De Breuker, R & Karpel, M (2015). Experimental
78
investgation of an autonomous flap for load alleviation. In Proceedings 56th AIAA/ASCEAHS/ASC
Structures, Structural Dynamics and Materials Conference (pp. 1-16). Reston, VA, USA: AIAA.
Bisagni, C, Furfari, D & Pacchione, M (2015) Fatigue and Damage Tolerance Assessment of 3-D
reinforced CFRP Bonded Joints, 28th ICAF Symposium – Helsinki, 3–5, (pp 496-509).
Ciarella, A, Tsotskas, C, Hahn, M, Werter, NPM, Breuker, R de, Beaverstock, C.S., Friswell, M.I.,
Yang, Y., Ozgen, S, Antoniadis, A, Tsoutsanis, P & Drikakis, D (2015). A multi-fidelity, multi-
disciplinary analysis and optimization framework for the design of morphing UAV wing. In s.n.
(Ed.), Proceedings of the 16th AIAA/ISSMO multidisciplinary analysis and optimization conference
(pp. 1-21). Reston: AIAA.
Dalenbring, M, Falk, U, Zdunek, A, Vescovini, R & Bisagni, C (2015) Static and Dynamic Buckling of
a DAEDALOS Composite Panel Including Material Damping, Proceedings of the 56th
AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials conference, paper AIAA 2015-
0184.
Dávila, CG, Bisagni, C, & Rose, CA (2015) Effect of Buckling Mode on the Fatigue Life and Damage
of Stiffened Structures Tolerance, Proceedings of the 56th AIAA/ASCE/AHS/ASC structures,
structural dynamics, and materials conference, paper AIAA 2015-1436.
Gillebaart, E & Breuker, R de (2015). Low-fidelity 2D isogeometric aeroelastic optimization with
application to a morphing airfoil. In M Zichenkov (Ed.), Proceedings of the 16th international
forum on aeroelasticity and structural dynamics, IFASD 2015 (pp. 1-19). s.l.: Central
Aerohydrodynamic Institute (TsAGI).
Gillebaart, E & Breuker, R de (2015). Reduced-order modeling of continuous-time state-space
unsteady aerodynamics. In s.n. (Ed.), Proceedings of the 53rd AIAA aerospace sciences meeting
(pp. 1-14). Reston: AIAA.
Guo, Y & Ruess, M (2015). Isogeometric weak coupling of shell structures. In s.n. (Ed.),
Proceedings of the 56th AIAA/ASCE/AHS/ASC structures, structural dynamics, and materials
conference (pp. 1-14). Reston: AIAA.
Jeliazkov, M, Sardar Abadi, PM, Lopes, CS, Abdalla, MM & Peeters, DMJ (2015). Buckling and first-
ply failure optimization of stiffened variable angle tow panels. In OT Thomsen (Ed.), Proceedings
of the 20th international conference on composite materials, ICCM 20 (pp. 1-12). s.l.: ICCM.
Jovanov, K & Breuker, R de (2015). Accelerated convergence of high-fidelity aeroelasticity using
low-fidelity aerodynamics. In M Zichenkov (Ed.), Proceedings of the 16th international forum on
aeroelasticity and structural dynamics, IFASD 2015 (pp. 1-12). s.l.: Central Aerohydrodynamic
79
Institute (TsAGI).
Jovanov, K & Breuker, R de (2015). Accelerated convergence of static aeroelasticity using low-
fidelity aerodynamics. In s.n. (Ed.), Proceedings of the 56th AIAA/ASCE/AHS/ASC structures,
structural dynamics, and materials conference (pp. 1-10). Reston: AIAA.
Lancelot, PMGJ, Sodja, J, Werter, NPM & Breuker, R de (2015). Design and testing of a low
subsonic wind tunnel gust generator. In M Zichenkov (Ed.), Proceedings of the 16th international
forum on aeroelasticity and structural dynamics, IFASD 2015 (pp. 1-18). s.l.: Central
Aerohydrodynamic Institute (TsAGI).
Peeters, DMJ & Abdalla, MM (2015). Effect of steering limit constraints on the performance of
variable stiffness laminates. In OT Thomsen (Ed.), Proceedings of the 20th international
conference on composite materials, ICCM 20 (pp. 1-12). s.l.: ICCM.
Peeters, DMJ & Abdallah, M (2015). Optimisation of variable stiffness composites with ply drops.
In s.n. (Ed.), Proceedings of the 56th AIAA/ASCE/AHS/ASC structures, structural dynamics, and
materials conference (pp. 1-13). Reston: AIAA.
Peeters, DMJ & Abdalla, MM (2015). Structural approximations for composite optimisation. In
NH Kim (Ed.), Proceedings of the 11th world conference on structural and multi-disciplinary
optimisation (pp. 1-6). Sidney: The University of Sidney.
Sardar Abadi, PM, Jeliazkov, M, Sebaey, TA, Lopes, CS, Abdalla, MM & Peeters, DMJ (2015).
Damage resistance of dispersed-ply laminates. In OT Thomsen (Ed.), Proceedings of the 20th
international conference on composite materials, ICCM 20 (pp. 1-11). s.l.: ICCM.
Sodja, J, Martinez, MJ, Simpson, JC & Breuker, R de (2015). Experimental evaluation of the
morphing leading edge concept. In s.n. (Ed.), Proceedings of the 23rd AIAA/AHS Adaptive
Structures Conference (pp. 1-12). Reston: AIAA.
Vescovini, R & Bisagni, C, (2015) Optimization of Non-Symmetric Composite Panels using Fast
Analysis Techniques, Proceedings of the 20th international conference on composite materials,
ICCM 20, (pp. 19-24)
Wang, D & Abdalla, MM (2015). Buckling optimization of steering stiffeners for grid-stiffened
composite structures. In OT Thomsen (Ed.), Proceedings of the 20th international conference on
composite materials, ICCM 20 (pp. 1-12). s.l.: ICCM.
Werter, NPM & Breuker, R de (2015). A framework for the aeroelastic analysis and design of
generic morphing wings. In s.n. (Ed.), Proceedings of the 23rd AIAA/AHS Adaptive Structures
80
Conference (pp. 1-15). Reston: AIAA.
Werter, NPM & Breuker, R de (2015). Aeroelastic tailoring and structural optimisation using an
advanced dynamic aeroelastic framework. In M Zichenkov (Ed.), Proceedings of the 16th
international forum on aeroelasticity and structural dynamics, IFASD 2015 (pp. 1-20). s.l.: Central
Aerohydrodynamic Institute (TsAGI).
Werter, NPM, Breuker, R de & Abdalla, MM (2015). Continuous-time state-space unsteady
aerodynamic modelling for efficient aeroelastic load analysis. In M Zichenkov (Ed.), Proceedings
of the 16th international forum on aeroelasticity and structural dynamics, IFASD 2015 (pp. 1-18).
s.l.: Central Aerohydrodynamic Institute (TsAGI).
Werter, NPM, Sodja, J & Breuker, R de (2015). Design and testing of an aeroelastically tailored
wing under manoeuvre loading. In M Zichenkov (Ed.), Proceedings of the 16th international
forum on aeroelasticity and structural dynamics, IFASD 2015 (pp. 1-16). s.l.: Central
Aerohydrodynamic Institute (TsAGI).
9.2 Books, chapters in book
Books:
Kassapoglou, C (2015). Modeling the effect of damage in composite structures. London: Wiley
Chapters in book:
Kassapoglou, C (2015). Modeling the stiffness and strength of aerospace structural elements. In
PE Iriving & C Soutis (Eds.), Polymer Composites in the Aerospace Industry (Composites Science
and Engineering, 50) (pp. 117-154). Sawston, Cambridge: Woodhead Publishing.
Ponnusami, SA, Turteltaub, SR, Zhang, X & Xiao, P (2015). Modelling crack propagation in
particle-dispersed self-healing thermal barrier coatings. In S van der Zwaag & E Brinkman (Eds.),
Self healing materials : Pioneering research in the Netherlands (pp. 229-241). Amsterdam: IOS
Press.
Shroff, S (2015). Skin and bones: Grid stiffened structures. In RNHW Gent & A Diemel (Eds.),
CleanEra: A collection of research projects for sustainable aviation (pp. 81-93). Amsterdam: IOS
Press BV.
Sloof, WG, Turteltaub, SR, Carabat, AL, Derelioglu, Z, Ponnusami, SA & Song, GM (2015). Crack
healing in yttria stabilized zirconia thermal barrier coatings. In S van der Zwaag & E Brinkman
(Eds.), Self healing materials : Pioneering research in the Netherlands (pp. 219-227). Amsterdam:
IOS Press.
81
10. Overview of research input and output Aerospace Structures and Computational Mechanics,
2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 7 7 2.0
Supporting staff 2) 0 0
PhD 3) 1 16 17 12.8
Post docs 3 3 0.9
Total 8 19 27 15.7 1) Sources of financing:
1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 20
Scientific publications: books, chapters in book 5
Scientific publications: refereed proceedings 25
PhD theses 3 *In cooperation with other EM-groups.
11. Keynote lectures and seminars
C. Bisagni:
Plenary Lecture for Track 1: Advances in Aerospace Technology at ASME conference, Houston, USA, November 16, 2015.
Inaugural Lecture at Delft University of Technology, December 9, 2015.
CEAS Conference, IN2SAI session, Delft, Netherlands, September 9, 2015.
Airbus RTG3 Composite Modeling Working Group, Bordeaux, France, June 11, 2015.
C. Kassapoglou:
10-day seminar in Chengdu China, July 2015 on "Design and Analysis of Composite Structures"
12. Memberships
82
12.1 Editorial boards international journals
C. Bisagni:
Associate Editor of American Institute of Aeronautics and Astronautics AIAA Journal.
Member of the Editorial Advisory Board of the Journal of Sandwich Structures and Materials
Member of the Editorial Board of International Journal of Crashworthiness.
Special Guest Editor of Progress in Aerospace Sciences.
12.2 International scientific committees C. Bisagni:
Executive Council Member of the International Committee on Composite Materials (ICCM).
Member of NAFEMS Composites Working Group.
International Member of the American Institute of Aeronautics and Astronautics (AIAA) Struc-tures Technical Committee.
Fourth Asian/Australian Rotorcraft Forum Conference, IISc, Bangalore, November 16 - 18, 2015.
Aerospace Structural Impact Dynamics International Conference, Seville, Spain, November 17-19, 2015.
3rd Int. Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Struc-tures, Braunschweig, Germany, March 25-27, 2015.
12.3 National Science Foundation and Academies 13. Awards, patents and NWO grants
C. Kassapoglou: Patent on "Detection of defects in adhesive bondlines" 14. International collaborations:
NASA Langley, Politecnico di Milano, DLR, RWTH, Technion, RMIT, SMR, Airbus Defense and
Space, Riga Technical University, ENSAIT, University of Manchester, National University of Singapore, IMDEA
83
7. RESEARCH DOCUMENTATION OF THE GROUP APPLIED MECHANICS (PME)
1. University/Department Delft University of Technology Faculty of Mechanical, Maritime and Materials Engineering (3mE) Department of Precision and Microsystems Engineering 2. Subprogrammes related to research school EM 2.1 Structural Optimization and Mechanics 2.2 Dynamic Behavior of Mechanical Systems 3. Group director Prof.dr.ir. F. van Keulen 4. Senior academic staff:
Dr.ir. F. Alijani Dr.ir. A.M. Aragon Dr.ir. C. Ayas
Assistant Professor Assistant Professor Assistant Professor
0.2 0.2 0.2
Dr.ir J.F.L. Goosen Prof.dr.ir. E.G.M. Holweg Prof.dr.ir F. van Keulen Dr.ir. M. Langelaar
Assistant Professor Full Professor Full Professor Assistant Professor
0.2 0.2 0.6 0.4
Dr.ir. H. Sadeghian Marnani Dr. Ir. P. Tiso
Guest Researcher Assistant Professor
0.4 0.2
Total fte: 2.6
5. Running PhD-projects in 2014 related to research school EM:
5.1 Structural Optimization and Mechanics
Bijster, Ir. R.J.F. (PhD2) Beyond conventional instrument: meta-
instrument
08-2014/08-2018
Boom, Ir. S.J. van den (PhD1) Design and optimization of tunable
acoustic metamaterials and phononic
crystals
03-2015/03-2019
Gupta, Ir. D.K. (PhD2) Topology optimization of electrode 09-2013/09-2017
84
patterns for solar cells: TopSol
Hooijkamp, Ir. E.C. (PhD3) PID Xtreme motion 02-2010-08-2015
Keyvani Janbahan, Ir. A. (PhD3) Design of smart probes for massively
parallel atomic force microscopy
04-2013/04-2017
Kempen, Ir. F.C.M. van (PhD3) Topology optimization of nanostructured
materials and layers for energy
conversion and storage
11-2012/11-2016
Kolk, Ir. M.van der (PhD3) Thermal Design & Optimization 12-2015/12-2019
Peters, Ir. H.J. (PhD3) Control of resonant compliant structures 11-2011/11-2015
Sajadi, Ir. B. (PhD3) Stability calibration of micro/nano
cantilever structures
01-2013/01-2017
Tamer, Ir. M.S. (PhD3) System design and construction for
massively paralleled atomic force
microscope cantilever array
06-2013/06-2017
Ur Rehman, Ir. S. (PhD2) Robust design optimization for
integrated photonic systems
10-2011/10-2015
Ven, Ir. E.A. van de (PhD2) Topology optimization for additive
manufacturing with process constraints
(TopAM)
02-2015/02-2019
Wang, Ir. Q. (PhD1) Design and optimization of wings for a
flapping-wing micro air vehicle
09-2012/09-2016
Zocca, Ir. M. (PhD2) Robust design optimization for
integrated photonic systems
10-2011/10-2015
85
5.2 Dynamic Behaviour of Mechanical Systems
Dedden, Ir. R.J. (PhD3) Dynamics of micro nozzles in large arrays 02-2013/02-2017 Kerst, Ir. S.M.A.A. (PhD3) Bearing load estimation for load based
vehicle dynamics control 11-2013/11-2016
Kirschneck, Ir. M. (PhD3) Mastering electro-mechanical dynamics of direct drive generators for large wind turbines
10-2011/10-2015
Kunnappillil Madhusudanan, Ir. A.
(PhD3) SKF Load based global chassis control 08-2011/08-2015
Seijs, Ir. M.V. van der
(PhD3) Real-time substructuring: a novel analysis and design method for development of high-tech systems
09-2011/09-2015
Tabak, Ir. U. (PhD2) Model reduction of multiphysical high-tech systems
06-2012/11-2015
Wu, Ir. L. (PhD1) Model order reduction for nonlinear structural dynamics
09-2013/09-2017
6. Postdocs:
Arat, Dr.ir. M.A (PD1) - 04-2014/04-2016 Iapichino, Dr.ir. L. (PD3) Dynamics of micro nozzles in large arrays 05-2015/01-2017 Shyrokau, Dr.ir. B (PD2) A step towards autonomous driving 02-2014/02-2017 Veen, Dr.ir. G.J. van der
(PD3) Integrated optimization of topology and controller for motion systems
05-2013/05-2016
7. Dissertations: related to research school EM:
Name: Akram, Ir. M. Title: Surface modification of titanium and polymide sheet for adhesive bonding. Advisor: Ernst, Prof.dr.ir. L.J. Co-advisor: Jansen, Dr.ir. K.M.B. Date: 26 February 2015 Name: Ozturk, Ir. B. Title: On the nonlinear thermomechanical behavior and delamination of conductive adhesives Advisor: Ernst, Prof.dr.ir. L.J. Co-advisor: Jansen, Dr.ir. K.M.B.
86
Date: 29 June 2015 Current position: Project leader Robert Bosch GmBH Name: Verbart, Ir. A. Title: Topology optimization with stress constraints Advisor: Keulen, Prof.dr.ir. A. van Co-advisor: Langelaar, Dr.ir. M. Date: 3 July 2015 Current position: Postdoc Technical University of Denmark
8. Short description of subprogrammes related to research school EM
8.1 Structural Optimization and Mechanics
For the case of Micro-Electrical-Mechanical Systems (MEMS) and high-tech applications, the interaction between mechanics and other domains of physics becomes critical. For mechanical problems related with engineering materials, different length scales need to be taken into account with various multi-scale approaches. Because of these aspects, the analysis of practical problems usually takes a tremendous effort. Therefore, further development of efficient, multidisciplinary, multi-scale numerical modelling techniques is required. It is also important to increase the computational efficiency of numerical techniques by smart choices of model order reduction without compromising the desired level of accuracy. These techniques should be tailored for high-performance computer architectures.
Vital to the numerical techniques aforementioned is the finite element method (FEM), which has become the de facto methodology for the analysis of problems in computational solid mechanics. The activities being developed at SOM not only make use of the FEM for solving challenging problems, but also involve developments to improve the numerical techniques themselves. In particular, finite element formulations of the Generalized/eXtended (GFEM/XFEM) type have the spotlight nowadays because of their ability to deal with complex geometries with very simple and structured finite element meshes. Decoupling the problem geometry from the mesh it is solved upon brings extra flexibility that could be exploited in the search for optimal designs.
Once numerical techniques are incorporated in a design process, for which often many intermediate designs and corresponding design sensitivities must be evaluated, the efficiency requirements are even more demanding. This holds for a design process in which intermediate designs are evaluated "manually", but becomes more important for (partially) automated optimization processes. Improvement of structural optimization techniques cannot be achieved independently from new developments in Computational Mechanics. Only a close integration of structural optimization techniques and numerical analysis strategies can yield the most efficient design tools. Clearly, manufacturing constraints impose additional challenges on the optimization. Within this theme, the fundamentals for modelling, analysis, design sensitivities and optimization of structures will be developed. The focus will be on the multidisciplinary links between these aspects. Furthermore, new developments will be translated in prototype designs, ready for laboratory testing and ultimately made available for
87
day-to-day practice. For this purpose we are collaborating with more application-oriented groups and companies.
8.2 Dynamic Behavior of Mechanical Systems
The design of current and future mechanical systems across different space/time scales becomes more challenging as new material developments, manufacturing technologies and design techniques make the systems lighter, more complex, more flexible and multi-functional. The challenge is mainly associated with the activation of nonlinearities which can give rise to a variety of phenomena that are not typical of linear systems: nonlinear modal interactions, transfers of energy from low to very high frequencies (situation which can become critical in complex micro-nano systems architectures), bifurcations, parametric multiplicative instabilities, subcritical behaviors, sub/superharmonic resonances, saturation, etc.
The aim of the Engineering Dynamics group is to develop studies addressing open problems in nonlinear dynamics with ground-breaking innovations in experimental, theoretical and numerical investigation. In particular, the goal is to put multi-scale nonlinear dynamical systems under a powerful microscope and pull as much as possible in full, three-dimensional formulations to unfold subtle behaviors, understand and frame them in unified theories and pave the way to their exploitation for enhanced mechanical designs. These are carried out by (i) developing innovative numerical codes based on reduced-order models together with analytical dynamics tools such as perturbation methods coupled with modern path following and bifurcation techniques, (ii) developing sophisticated measuring systems and experimental procedures to validate numerical codes, and observe complex dynamics.
The stated goals call for new tools or innovative modifications of existing tools to resolve the various time and space scales that can coexist in multi-scale nonlinear dynamical systems. Moreover, the nonlinear dynamical phenomenology is not simply investigated to avoid it during systems operations, but to integrally embed it into the design process so as to drastically improve controllability in new passive/active vibration systems architectures, sensitivity in sensing systems such as mass, and pressure sensing, actuability in actuator systems, and observability in damage detection systems.
9. Refereed scientific publications related to research school EM
9.1 Refereed journals Akram, M, Jansen, KMB, Ernst, LJ, Bhowmik, S, Ajeesh, G, Ahmed, S & Chakraborty, D (2015). Effect of atmospheric pressure plasma modification on polyimide and adhesive joining with titanium. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 46(10), 4680-4687. Arat, MA, Taheri, S & Holweg, EGM (2015). Road profile estimation for active suspension applications. SAE International Journal of Passenger Cars - Mechanical Systems, 8(2), 492-500.
88
Ayas, C, Dautzenberg, LCP, Geers, MGD & Deshpande, VS (2015). Climb-enabled discrete dislocation plasticity analysis of the deformation of a particle reinforced composite. Journal of Applied Mechanics, 82(7), 071007-1-071007-13. Cuba Ramos, A, Aragon, AM, Soghrati, S, Geubelle, PH & Molinari, JF (2015). A new formulation for imposing Dirichlet boundary conditions on non-matching meshes. International Journal for Numerical Methods in Engineering, 103(6), 430-444. Gupta, DK, Langelaar, M, Barink, M & Keulen, A van (2015). Topology optimization of front metallization patterns for solar cells. Structural and Multidisciplinary Optimization: computer- aided optimal design of stressed solids and multidisciplinary systems, 51(4), 941-955. Herfst, R, Dekker, B, Witvoet, G, Crowcombe, W, Lange, D de, Sadeghian Marnani, H. A miniaturized, high frequency mechanical scanner for high speed atomic force microscope using suspension on dynamically determined points. Review of Scientific Instruments 86, 113703 (2015). Ivanov, V, Savitski, D & Shyrokau, B (2015). A survey of traction control and anti-lock braking systems of full electric vehicles with individually-controlled electric motors. IEEE Transactions on Vehicular Technology, 64(9), 3878-3896. Kirschneck, M, Rixen, DJ, Polinder, H & Ostayen, RAJ van (2015). Electromagnetomechanical coupled vibration analysis of a direct-drive off-shore wind turbine generator. Journal of Computational and Nonlinear Dynamics, 10(4), 1-12. Kolk, M van der, Veen, GJ van der, Vreugd, J de, Langelaar, M. Multi-material topology optimization of viscoelasticity damped structures using a parametric level set method. Journal of Vibration and Control, 1-14. Kunnappillil Madhusudhanan, A, Corno, M & Holweg, EGM (2015). Sliding mode-based lateral vehicle dynamics control using tyre force measurements. Vehicle System Dynamics: international journal of vehicle mechanics and mobility, 53(11), 1599-1619. Ma, X, Kato, Y, Kempen, FCM van, Hirai, Y, Keulen, F van, Tsuchiya, T & Tabata, O (2015). Experimental Study of Numerical Optimization for 3-D Microstructuring Using DMD-Based Grayscale Lithography. Journal of Microelectromechanical Systems, 24 (6), pp 1856-1867. Peters, HJ, Tiso, P, Goosen, JFL & Keulen, A van (2015). A modal-based approach for optimal active modifications of resonance modes. Journal of Sound and Vibration, 334, 151-163. Peters, HJ, Tiso, P, Goosen, JFL & Keulen, F van (2015). Effective response modifications of non- proportionally damped resonating structures. Applied Mechanics and Materials, 704, 143-147. Peters, HJ, Goosen, JFL & Keulen, F van (2015). Optimal FWMAV wing design for a combination of energy-effective hovering and roll control. International Journal of Micro Air Vehicles, 7(1), 41-54.
89
Rehman, SU & Langelaar, M (2015). Efficient global robust optimization of unconstrained problems affected by parametric uncertainties. Structural and Multidisciplinary Optimization: computer-aided optimal design of stressed solids and multidisciplinary systems, 52, 319-336. Rixen, DJ, Boogaard, MA, Seijs, MV van der, Schothorst, G van & Poel, T van der (2015). Vibration source description in substructuring: A theoretical depiction. Mechanical Systems and Signal Processing, 60-61, 498-511. Roy, PNS & Gupta, DK (2015). FractalAnalyzer: A MATLAB application for multifractal seismicity analysis. Seismological Research Letters, 86(5), 1424-1431. Shyrokau, B, Wang, D, Savitski, D, Hoepping, K & Ivanov, V (2015). Vehicle motion control with subsystem prioritization. Mechatronics, 30, 297-315. Tabak, U, Rixen, DJ (2015). Vibro-Lanczos, a symmetric Lanczos solver for vibro-acoustic simulations. International Journal for Numerical Methods in Engineering 2015, DOI: 10.1002/nme.5170. Valk, PLC van der, Voormeeren, SN, Valk, PC de & Rixen, DJ (2015). Dynamic models for load calculation procedures of offshore wind turbine support structures: overview, assessment, and outlook. Journal of Computational and Nonlinear Dynamics, 10(4), 1-15. Veen, GJ van der, Langelaar, M & Keulen, F van (2015). Integrated topology and controller optimization of motion systems in the frequency domain. Structural and Multidisciplinary Optimization: computer-aided optimal design of stressed solids and multidisciplinary systems, 51(3), 673-685. Wu, L & Tiso, P (2015). Nonlinear model order reduction for flexible multibody dynamics: a modal derivatives approach. Multibody System Dynamics, PP(99), 1-21.
9.2 Books, chapters in book Books: None
Chapters in book:
Veen, GJ van der, Wingerden, JW van & Verhaegen, M (2015). Active vibration control using subspace predictive control. In M Lovera (Ed.), Control-oriented Modelling and Identification: theory and practice (IET Control Engineering Series, 80) (pp. 269-274). Stevenage, UK: IET. 9.3 Refereed proceedings Ayas, C & Deshpande, V (2015). Climb enabled discrete dislocation plasticity of superalloy. In A Ofenheimer, C Poletti, D Schalk-Kitting & C Sommitsch (Eds.), Proceedings of the 8th International ESAFORM Conference on Material Forming Vol. 651-653. Key Engineering Materials (pp. 981-986). Pfaffikon, Switzerland: Trans Tech Publications.
90
Berens, J, Tiso, P & Schmehl, R (2015). Dynamic nonlinear aeroelastic behaviour of flexible wings in an airflow. In R Schmehl (Ed.), Book of Abstracts of the Airborne Wind Energy Conference (pp. 46-47). Delft, The Netherlands: TU Delft. Eling, R, Ostayen, RAJ van and Rixen, DJ (2015). Oil flow in connecting channels of oating ring bearings. In H. Ecker, H. Irretier, R. Liebichand, R. Markert, R. Nordmann, and J. Strackeljan, editors, 11. Internationale Tagung Schwingungen in Rotierenden Maschinen (SIRM), 2015. Gupta, DK, Langelaar, M, Keulen, F van & Barink, M (2015). Topology optimization for improving the performance of solar cells. In A Araujo, H Rodrigues & et al (Eds.), Engineering Optimization IV - Proceedings 4th International Conference on Engineering Optimization (pp. 323-328). Leiden, The Netherlands: CRC Press/Balkema. Keyvani, A, Sadeghian Marnani, H, Goosen, JFL, Keulen, F van (2015). Dynamically Compliant
Probes for Atomic Force Microscopy, 12th Annual International Workshop on Nanomechanical
Sensing, 13-15 Jul 2015 Auckland, New Zealand.
Keyvani, A, Sadeghian Marnani, H, Goosen, JFL, Keulen, F van (2015). Tip-Sample Interactions in
Dynamically Compliant AFM Probes, 12th Annual International Workshop on Nanomechanical
Sensing, 13-15 Jul 2015 Auckland, New Zealand.
Keyvani, A, Sadeghian Marnani, H, Goosen, JFL, Keulen, F van (2015). Transient tip-sample
interactions in high-speed AFM imaging of 3D nanostructures, Proc. SPIE 9424, Metrology,
Inspection, and Process Control for Microlithography, doi:10.1117/12.2185848, San Jose,
California, United States | February 22, 2015
Keyvani, A, Sadeghian Marnani, H, Goosen, JFL, Keulen, F van (2015). Low Force Tapping Mode
Imaging of Biological Samples with Tapered Cantilevers, 17th Annual winter workshop on
Advances in Single Molecule research for biology and NanoScience, 30 Jan-2 Feb 2015, Linz
Austria.
Kirschneck, M, Rixen, DJ, Polinder, H & Ostayen, RAJ van (2015). In-situ experimental modal analysis of a direct-drive wind turbine generator. In J De Clerck (Ed.), Experimental Techniques, Rotating Machinery, and Acoustics, Volume 8: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015 Conference Proceedings of the Society for Experimental Mechanics Series (pp. 157-165). Cham, Switzerland: Springer International Publishing & The Society for Experimental Mechanics, Inc.. Kirschneck, M, Polinder, H, Ostayen, RAJ, van, Kempen, FJ and Rixen, DJ (2015).Structural Dynamic Topology Optimization of a Direct-Drive Single Bearing WindTurbine Generator, June 11, Sydney, Australia, WCSMO 11.
91
Ma, X, Kato, Y, Hirai, Y, Kempen, FCM van, Keulen, F van, Tsuchiya, T & Tabata, O (2015). Optimization methods for 3D lithography process utilizing DMD-based maskless grayscale hotolithography system. Proc. SPIE 9426, Optical Microlithography XXVIII, 94260F, 22 February 2015. Madhusudhanan, AK, Corno, M and Holweg, E (2015). Vehicle Sideslip Estimation Using Tyre
Force Measurements, the 23rd Mediterranean Conference on Control & Automation,
Torremolinos, Spain, pp. 88-93, June 16-19, 2015.
Madhusudhanan, AK, Corno, M and Holweg, E (2015). Vehicle Yaw Rate Control Using Tyre
Force Measurements, the 14th European Control Conference, Linz, Austria, pp. 2582-2587, July
15-17, 2015.
Ozturk, B, Lou, P, Gromala, P, Silber, C, Jansen, KMB & Ernst, LJ (2015). Characterization and simulation of LTCC/adhesive and alloy 42/adhesive interface strength for automotive applications. In Proceedings of the 2015 16th International Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Microelectronics and Microsystems (pp. 1-10). Piscataway, NJ, USA: IEEE. Peters, HJ, Wang, Q, Goosen, JFL and Keulen, F van (2015). Active Control of the Passive Pitching of a Flapping Wing with Electrostatic Clamping, In Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2015), 3–6 June 2015, Ponta Delgada, Azores, Portugal. Peters, HJ, Wang, Q, Goosen, JFL and Keulen, F van (2015). An Inventory of Structural Changes to Modify the Dynamic Response of Lightweight Compliant FWMAV Designs, In Proceedings of International Micro Air Vehicle Conference and Flight Competition (IMAV2015), 15–18 September 2015, Aachen, Germany. Sajadi, B, Goosen, JFL & Keulen, F van (2015). Pull-in Instability of Clamped Plates for Pressure
Measurements. In Proceedings of the 12th Annual International Workshop on Nanomechanical
Sensing (pp. 1-2). Auckland, New Zealand.
Seijs, MV van der, Pasma, EA, Klerk, D de & Rixen, DJ (2015). A comparison of two component TPA approaches for steering gear noise prediction. In M Allen, RL Mayes & DJ Rixen (Eds.), Dynamics of Coupled Structures, Volume 4: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015 Conference Proceedings of the Society for Experimental Mechanics Series (pp. 71-79). Cham, Switzerland: Society for Experimental Mechanics & Springer International Publishing. Sombroek, C, Renson, L, Tiso, P & Kerschen, G (2015). Bridging the gap between nonlinear normal modes and modal derivatives. In G Kerschen (Ed.), Nonlinear Dynamics Volume 1; Proceedings of the 33rd IMAC - A Conference and Exposition on Structural Dynamics, 2015 Conference Proceedings of the Society for Experimental Mechanics Series (pp. 349-361). Cham, Switzerland: Society for Experimental Mechanics & Springer International Publishing.
92
Teunisse, N, Tiso, P, Demasi, L & Cavallaro, R (2015). Computational reduced order methods for structurally nonlinear joined wings. In Proceedings of the 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (pp. 2008-2021). Reston, VA, USA: AIAA. Veen, GJ van der, Langelaar, M, Meulen, S van der, Aangenent, W, Laro, D and Keulen, F van
(2015). Topology optimization for the conceptual design of precision mechatronic systems,
30th ASPE Annual Meeting 2015, Austin, 2-6 November 2015.
Ven, E van de, Driessen, AM, Keulen, F van, and Langelaar, M (2015). Overhang Angle Control
and Optimal Part Orientation in Topology Optimization for Additive Manufacturing. In
Proceedings of the 9th European Solid Mechanics Conference (ESMC), 6-10 July 2015, Leganés-
Madrid, Spain.
Ven, E van de, Hooijkamp, EC, Langelaar, M and Keulen F van (2015). Topology Optimization of a
Transient Thermo-Mechanical Problem using Material Penalization, Advances in Structural and
Multidisciplinary Optimization - Proceedings of the 11th World Congress on Structural and
Multidisciplinary Optimization, Qing Li, Grant P. Steven and Zhongpu (Leo) Zhang (Eds), page
966-971, International Society for Structural and Multidisciplinary Optimization (ISSMO), Sydney,
Australia, 7-12 June 2015 (ISBN 13: 978-0-646-94394-7).
Wang, Q, Goosen, JFL & Keulen, F van (2015). Optimal pitching axis of flapping-wings for hovering flight. In A Araujo, H Rodrigues & et al (Eds.), Engineering Optimization IV - Proceedings 4th International Conference on Engineering Optimization (pp. 409-414). Leiden, The Netherlands, UK: CRC Press/Balkema. Wu, L, Tiso, T, Jain, S and Keulen, F van (2015). Quadratic manifolds for reduced order modelling of highly flexible multibody Systems, ECCOMAS Thematic Conference on Multibody Dynamics. 10 Overview of research input and output ‘Applied Mechanics (PME)’ related to EM, 2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 7 - 2 9 2.6
Supporting staff 2) - - - - -
PHD 3) 3 6 12 21 16.8
Post docs 2 1 1 4 3.2
Total 12 7 18 37 22.6 1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
93
10.2 Output
Total
Scientific publications: refereed journals 22
Scientific publications: books, chapters in book 1
Scientific publications: refereed proceedings 25
PhD theses 3 * In cooperation with other EM-groups.
11. Keynote lectures and seminars
-
12. Memberships
12.1 Editorial boards international journals -
12.2 International scientific committees Prof.dr.ir. F. van Keulen ASPE, Achieving Precision Tolerances in Additive Manufacturing, Raleigh, NC, April 2015
WCSMO-11, Sydney 2015
Spring Topical Meeting, Achieving Precision Tolerances in, Additive Manufacturing, North Carolina State University, Raleigh, North Carolina,, MaUSA, April 26-29, 2015
Dr.ir. C. Ayas Small Scale Plasticity, Damage and Fracture mini-symposium in Metal Forming ESAFORM Conference 2015, Graz Austria 12.3 National Science Foundation and Academies Prof.dr.ir. F. van Keulen Vice-chair Executive Board NanoNextNL 13. Awards, patents and NWO grants - 14. International collaborations:
Alijani F, collaboration with Amabili, M, McGill University, Canada; with Garziera R, University of Parma, Italy; and with Karazis, K, AREVA Inc, USA.
Aragón, AM, collaboration with A. Simone at TU Delft; with C. A. Duarte at the University of Illinois Urbana-Champaign, USA; with J. F. Molinari at the École Polytechnique Fédérale de Lausanne, Switzerland; with S. Soghrati at Ohio State University, USA; and with V. Yastrebov at MINES ParisTech, France.
Ayas, C, collaboration with Deshpande, V, Cambridge University, UK
94
Keulen, A van, collaboration with Prof. Tabata, Kyoto
Langelaar, M, collaboration with K. Maute, University of Colorado at Boulder, CO, USA; with G.H. Yoon, Hanyang University, Seoul, Korea; with J. Korvink, Freiburg University, Freiburg, Germany; with O. Sigmund, Technical University of Denmark, Lyngby, Denmark; and with M. Ruess, University of Glasgow, Glasgow, UK.
95
8. RESEARCH DOCUMENTATION OF THE GROUP COMPUTATIONAL MECHANICS, STRUCTURAL MECHANICS AND DYNAMICS
1. University/Department Delft University of Technology
Faculty of Civil Engineering and Geosciences 2. Subprogrammes related to research school EM 2.1 Computational Modelling of Failure 2.2 Advanced Computational Procedures 2.3 Structural Dynamics 3. Group director
Prof.dr.ir. L.J. Sluys
4. Senior academic staff: Dr. R.I.N. Al-Khoury Associate Researcher 0.2 Dr.ir. K.N. van Dalen Associate Researcher 0.4 Dr.ir. F.P. van der Meer Associate Researcher 0.4 Prof.dr. A.V. Metrikine Professor 0.4 Dr. A. Simone Associate Professor 0.4 Prof.dr.ir. L.J. Sluys Professor 0.4 Dr.ir. M.Stroeven Associate Researcher 0.1 Total fte: 2.3
5. Running PhD-projects in 2014 related to research school EM:
Barcelos, MSc. I. (PhD 3) Micromechanics Based
Modelling and Condition
Monitoring of Rotor Blade
Composites
10-2014 / 10-2018
Berg, van den, MSc. M. (PhD 3) Actions and action effects of
ice ridges on floating
structures and moorings
08-2014 / 08-2017
96
Cao, MSc. Y (PhD 3) Computer modelling of
failure processes in
composite structures under
dynamic loading
01-2016 / 01-2020
Ghavamian, MSc F. (PhD 3) Computational Modelling of
Structural Batteries
02-2015 / 01-2019
Goudarzi, MSc. M. (PhD 3) Computational modelling of
fiber-reinforced composites
for structural batteries
09-2014 / 09-2018
Hendrikse, MSc. H. (PhD 3) Ice-induced vibrations of
bottom-founded structures
09-2011/ 09-2016
Karamnejad, MSc. A. (PhD 2) Multi-scale modelling of
impact-resistant materials
02-2011 / 02-2016
Keijdener, MSc. Chr. (PhD 3) Effect of the ice-floater
dynamic interaction on the
ice breaking process
01-2013 / 01- 2016
Lahuerta, MSc. F. (PhD 3) Fatigue in thick laminates 10-2012 / 10-2016
Latifi, , MSc. M. (PhD 3) Modelling of fatigue in
composite laminates
10-2012 / 10- 2016
Li, MSc. K. (PhD 3) Computational modelling of
hydration processes in
brittle materials
10-2012 / 10-2016
Liu, MSc. Y. (PhD 3) Efficient computational
modelling of high-rate
effects in FRP laminated
composites
09-2014 / 09-2018
Lu, MSc. T (PhD 3) Dynamics of a flexible train
wheel
09-2012 / 09-2016
Magalhaes Pereira, MSc. L.F.
(PhD 3) The experimental and
computational analysis
towards damage prediction
in concrete panels due to
close-in explosions.
02-2013 / 02- 2017
97
Malagu, MSc. M. (PhD 3) Modeling of high-performance fiber-reinforced composites
04-2013 / 04-2016
Mandapalli, MSc. P.R. (PhD 3) Multi-physics computational
modelling of damage
development in
heterogeneous materials
under plane impact loading.
01-2009 / 01- 2015
Mostofizadeh, MSc. S. (PhD 3) Failure of thin walled
structures under blast and
impact loading
04-2013 / 03-2016
Musivand Arzanfudi, MSc. M.
(PhD 3) Computational modelling of
CO2 sequestration
01-2012 / 01-2016
Oikou, MSc. N. (PhD 3) The dynamics of a deep
water
09-2011 / 08-2016
Paknahad, MSc A. (PhD 3) Computational modelling of
fibre-reinforcement of bio
ceramic cements for bone
implants
10-2015 / 09-2019
Piani, MSc. T. Li, (PhD 3) Computational modelling of
adobe materials
09-2015 / 09-2019
Renting, MSc. F.W. (PhD 3) The effect of soil
nonlinearity on the short-
term and long-term
dynamics of offshore mono
piles
01-2014 / 01-2018
Sanchez Gomez, S. (PhD 3) Building components in high
rise buildings
01-2014 / 01-2017
Sillem, MSc. A. (PhD 2) Computational modelling of
fibre-reinforced concrete
04-2010 / 04- 2015
Simons, MSc. E. (PhD 3) Computational material design
and characterization of
ceramics for ballistic protection
10-2014 / 09-2018
98
Srinivasan, MSc. P. (PhD 2) Harvesting thermal energy with a new stimuli responsive polymer composite
09-2013 / 08-2017
Vliet, MSc. R. (PhD 3 ) Numerical modelling of the
dynamic interaction of ice
with an ice-veining vessel
12-2012 / 12- 2016
Voormeeren, MSc. L (PhD 3) Modelling of load-sequence
effects on fatigue crack
grouth
05-2014 / 05-2018
Zhao, MSc. M. (PhD 3) Stability of thin walled
structures under blast and
impact loading
09-2013 / 08-2017
Zhuo, MSc. M (PhD 3) Computational modelling of
fiber-reinforced composites
for structural batteries
08-2015 / 07-2019
6. Postdocs:
Arash, B.. PD3 investigation of fundamental
aspects of failure in short
glass fiber reinforced
composites
01-9-2015 / 08-2016
Grazioli, D. PD3 Computational Modelling of
materials for structural
batteries
01-2016 / 12-2017
Verners, O PD3 Computational modelling of
materials for structural
batteries
09-2014 / 09-2017
7. Dissertations: related to research school EM:
Name: Fan, J. Title: Dynamic response of a polymer and polymer composite systems Advisor: Prof.dr.ir. L.J. Sluys Co-advisor: Dr.ir. J. Weerheijm
99
Date: 22 december 2015 Current position: Name: Le, L.B.N. Title: Micro-level porosimetry of virtual cementitious materials. Structural impact on mechanical and durability evolution Advisor: Prof.dr.ir. L.J. Sluys Co-advisor: . Date: 19 oktober 2015 Current position: Name: Talebian, M. Title: Computational modeling of hydro-electro-mechanical flow during CO2 geosequestration. Advisor: Prof.dr.ir. L.J. Sluys Co-advisor: Dr. RIN Al-Khoury Date: 9 maart 2015 Current position: Name: Tsouvalas, A. Title: Underwater noise generated by offshore pile driving. Advisor: Prof.dr. A. Metrikine Co-advisor: Date: 27 november 2015 Current position: UD faculteit Civiele Techniek en Geowetenschappen, sectie Offshore, TU Delft
8. Short description of sub programmes related to research school EM 8.1 Computational Modelling of Failure
Simulation of failure and the associated phenomenon of strain localisation for a range of
materials. Activities focus on multiscale modelling techniques, improved computational
procedures and the integration of experimental methods and sophisticated computational
procedures.
8.2 Advanced Computational Procedures
This research topic is concerned with the development of computational models for the
simulation of the behaviour of materials and structures. For this purpose accurate and robust
models are made for the temporal and spatial discretization and algorithms are constructed for
the efficient, accurate and robust solution of the ensuing non-linear algebraic equations.
100
8.3 Structural Dynamics
The development, experimental validation, and numerical implementation of prediction models
of (i) ground vibration from high-speed trains and (ii) vibration of submerged flexible offshore
structures in waves and currents
9. Refereed scientific publications related to research school EM 9.1. Refereed Journals
Ahmed, A & Sluys, LJ (2015). A computational model for the simulation of dynamic fracture in laminated composite plates. Journal of Composite Materials, 49(14), 1717-1738.
Ahmed, A & Sluys, LJ (2015). A phantom node method for modelling coupled adiabatic-isothermal cracking in FRP composites. Computer Methods in Applied Mechanics and Engineering, 49(14), 1717-1738.
Alfaiate, Dias-da-Costa, D & Sluys, LJ (2015). Modelling mixed-mode fracture using an energy-based damage model. Key Engineering Materials, 627, 49-52.
Amiri-Rad, A, Mashayekhi, M, Meer, FP van der & Hadavinia, H (2015). A two-scale damage model for high cycle fatigue delamination in laminated composites. Composites Science and Technology, 120(December), 32-38.
Dalen, KN van, Mikesell, TD, Ruigrok, EN & Wapenaar, CPA (2015). Retrieving surface waves from ambient seismic noise using seismic interferometry by multidimensional deconvolution. Journal Of Geophysical Research-Solid Earth, 120(2), 944-961. Dalen, KN van, Tsouvalas, A, Metrikine, A & Hoving, JS (2015). Transition radiation excited by a surface load that moves over the interface of two elastic layers. International Journal of Solids and Structures, 73-74(November), 99-112.
Fan, J, Weerheijm, J & Sluys, LJ (2015). Dynamic compressive mechanical response of a soft polymer material. Materials and Design, 79(August), 73-85. Fan, J, Weerheijm, J & Sluys, LJ (2015). Glass interface effect on high-strain-rate tensile response of a soft polyurethane elastomeric polymer material. Composites Science and Technology, 118(October), 55-62.
Fan, J, Weerheijm, J & Sluys, LJ (2015). High-strain-rate tensile mechanical response of a polyurethane elastomeric material. Polymer, 65(May), 72-80. Hendrikse, H & Metrikine, A (2015). Interpretation and prediction of ice induced vibrations based on contact area variation. International Journal of Solids and Structures, 75-76(December), 336-348.
101
Karamnejad, A & Sluys, LJ (2015). A multi-scale scheme for modelling fracture under dynamic loading conditions. Key Engineering Materials, 627, 37-40. Lahuerta, F, Nijssen, RPL, Meer, FP van der & Sluys, LJ (2015). Experimental-computational study towards heat generation in thick laminates under fatigue loading. International Journal of Fatigue, 80(November), 121-127.
Latifi, M, Meer, FP van der & Sluys, LJ (2015). A level set model for simulating fatigue-driven delamination in composites. International Journal of Fatigue, 80(July), 434-442. Li, K, Stroeven, P & Le, LBN (2015). Methodology for porosimetry in virtual cementitious composites to economically and reliably estimate permeability. Image Analysis and Stereology, 34(2), 73-86. Malagu, M, Benvenuti, E & Simone, A (2015). One-dimensional nonlocal elasticity for tensile single-walled carbon nanotubes: A molecular structural mechanics characterization. European Journal of Mechanics A - Solids, 54(November/December), 160-170.
Meer, FP van der & Sluys, LJ (2015). The Thick Level Set method: Sliding deformations and damage initiation. Computer Methods in Applied Mechanics and Engineering, 285(March), 64-82. Meer, FP van der (CiTG-StrE-SM Structural Mechanics) (2015). A level set model for delamination in composite materials. In SR Hallett & PP Camanho (Eds.), Numerical modelling of failure in advanced composite materials (93-107). Cambridge: Woodhead. Metrikine, A, Kudarova, A, Hoving, JS & Vliet, R van (2015). On the minimization of wave reflection at the interface of a discrete system and a dispersively similar continuum. Journal of Sound and Vibration, 346(June), 191-199. Musivand Arzanfudi, M & Al-Khoury, RIN (2015). A compressible two-fluid multiphase model for CO2 leakage through a wellbore. International Journal for Numerical Methods in Fluids, 77(8), 477-507.
Nord, TS, Lourens, E, Oiseth, O & Metrikine, A (2015). Model-based force and state estimation in experimental ice-induced vibrations by means of Kalman filtering. Cold Regions Science and Technology, 111(March), 13-26. Saeid, S, Al-Khoury, RIN, Hamidreza M. Nick, & Hicks, MA (2015). A prototype design model for deep low-enthalpy hydrothermal systems. Renewable Energy, 77(May), 408-422. Sillem, A, Simone, A & Sluijs, LJ (2015). The orthonormalized generalized finite element method-OGFEM: Efficient and stable reduction of approximation errors through multiple orthonormalized enriched basis functions. Computer Methods in Applied Mechanics and Engineering, 287(April), 112-149. Steenstra, W, Meer, FP van der & Sluys, LJ (2015). An efficient approach to the modeling of compressive transverse cracking in composite laminates. Composite Structures, 128(September), 115-121.
102
Stroeven, P, Li, K, Le, LBN, He, H & Stroeven, M (2015). Capabilities for property assessment on different levels of the micro-structure of DEM-simulated cementitious materials. Construction and Building Materials, 88(July), 105-117. Tsouvalas, A, Dalen, KN van & Metrikine, A (2015). The significance of the evanescent spectrum in structure-waveguide interaction problems. Journal of the Acoustical Society of America, 138(4), 2574-2588.
9.2 Books, chapters in book ---
9.3 Refereed proceedings
De Oliveira Barbosa, JM, Versteijlen, WG, Dalen, KN van & Metrikine, A (2015). Method for extracting an equivalent Winkler model of the 3D dynamic soil-structure interaction of large-diameter offshore monopile foundations. In DA Indeitsev & AM Krivtsov (Eds.), Proceedings of the 43th international summer school conference, APM 2015 (pp. 436-447). St. Petersburg: SPBSPU / IPME RAS. Hoving, JS & Metrikine, A (2015). A mixed time-frequency domain method to describe the dynamic behaviour of a discrete medium bounded by a linear continuum. In DA Indeitsev & AM Krivtsov (Eds.), Proceedings of the 43th international summer school conference, APM 2015 (pp. 132-143). St. Petersburg: SPBSPU / IPME RAS.
Keijdener, C & Metrikine, A (2015). A simple numerical model of a geometrically nonlinear Timoshenko beam. In DA Indeitsev & AM Krivtsov (Eds.), Proceedings of the 43th international summer school conference, APM 2015 (pp. 156-167). St. Petersburg: SPBSPU / IPME RAS. Keijdener, C & Metrikine, A (2015). An efficient method for computing the time domain response of a floating ice block including hydrodynamics. In K Hoyland, E Kim, R Lubbad & W Lu (Eds.), Proceedings of the 23rd international conference on port and ocean engineering under arctic conditions, POAC15 (pp. 1-14). Trondheim: Lulea University of Technology. Lahuerta, F, Nijssen, RPL, Meer, FP van der & Sluys, LJ (2015). Static and dynamic through thickness lamina properties of thick laminates. In OT Thomsen & C Berggreen (Eds.), Proceedings of the 20th international conference on composite materials (pp. 1-9). s.l.: ICCM.
Latifi, M, Meer, FP van der & Sluys, LJ (2015). A thick level set interface model for simulating fatigue-drive delamination in composites. In SR Hallett & JJC Remmers (Eds.), Proceedings of the 5th ECCOMAS thematic conference on mechanical response of composites (pp. 1-12). Bristol: University of Bristol. Le, NLB, Stroeven, P, Stroeven, M & Sluys, LJ (2015). Demonstration and validation by simple examples of a complete analogue porosimetry methodology for virtual cement pastes on micro-level. In AM Brandt, J Olek, MA Glinicki, CKY Leung & J Lis (Eds.), Proceedings of the 11th international symposium on brittle matrix composites, BMC-11 (pp. 1-10). Warsaw: Institute of Fundamental Technological Research PAS.
103
Li, K, Stroeven, P, Stroeven, M & Sluys, LJ (2015). Liquid water permeability of partially saturated cement paste assessed by dem-based methodology. In AM Brandt, J Olek, MA Glinicki, CKY Leung & J Lis (Eds.), Proceedings of the 11th international symposium on brittle matrix composites, BMC-11 (pp. 1-10). Warsaw: Institute of Fundamental Technological Research PAS. Lu, T & Metrikine, A (2015). On the existence of a critical speed of a rotating ring under a stationary point load. In DA Indeitsev & AM Krivtsov (Eds.), Proceedings of 43th international summer school-conference advanced problems in mechanics (APM) 2015 (pp. 234-244). St. Petersburg: SPBSPU / IPME RAS. Magalhaes Pereira, LF, Weerheijm, J & Sluys, LJ (2015). Modelling dynamic tensile failure of quasi-brittle materials using stress-enhanced nonlocal models. In Z Zhao & L Heng Eu Chang (Eds.), Proceedings of the 5th international conference on design and analysis of protective structures (pp. 1-10). Singapore: Nanyang Technological University. Rocha, IBCM, Raijmaekers, S, Nijssen, RPL & Meer, FP van der (2015). Hydrothermal ageing of glass/epoxy composites for wind turbine blades. In OT Thomsen & C Berggreen (Eds.), Proceedings of the 20th international conference on composite materials (pp. 1-11). Shamasundar, R, Al-Khoury, RIN & Mulder, WA (2015). Dispersion analysis of finite-element schemes for a first-order formulation of the wave equation. In M Mozetic (Ed.), Proceedings of the 77th EAGE conference and exhibition, 2015 (pp. 1-5). Houten: EAGE. Srinivasan, P, Nicola, L, Thijsse, BJ & Simone, A (2015). Molecular dynamics simulations of the two-way shape-memory effect in NiTi nanowires. In R Yang, HD Espinosa, M Migliorato & X Wang (Eds.), Proceedings Symposium P: Nanogenerators and Piezotronics Vol. 1782. Materials Research Society Symposium Proceedings (pp. 35-40). Cambridge, UK: Cambridge University Press. Stroeven, P (2015). How to measure path length? In AM Brandt, J Olek, MA Glinicki, CKY Leung & J Lis (Eds.), Proceedings of the 11th international symposium on brittle matrix composites, BMC-11 (pp. 1-10). Warsaw: Institute of Fundamental Technological Research PAS. Tsouvalas, A & Metrikine, A (2015). A three-dimensional semi-analytical model for the prediction of underwater noise from offshore pile driving. In Y Wijnant & D Botteldooren (Eds.), Proceedings of the 10th European congress and exposition on noise control engineering, Euronoise 2015 (pp. 617-622). Heerde: NAG. Tsouvalas, A & Metrikine, A (2014). A three-dimensional semi-analytical model for the prediction of underwater noise generated by offshore pile driving. In Y Zhou, Y Liu, L Huang & DH Hodges (Eds.), Proceedings of the 2nd symposium on fluid-structure-sound interactions and control Lecture Notes in Mechanical Engineering (pp. 259-264). Dordrecht: Springer. Verners, O, Duin, ACT van, Wagemaker, M & Simone, A (2015). Molecular dynamics modeling of structural battery components. In OT Thomsen (Ed.), Proceedings of the 20th international conference on composite materials, ICCM 20 (pp. 1-12). s.l.: ICCM.
104
Weemstra, C, Wapenaar, CPA & Dalen, KN van (2015). Reflecting boundary conditions for interferometry by multidimensional deconvolution. In RV Schneider (Ed.), Proceedings of the 85th SEG annual meeting, expanded abstracts Vol. 2015. SEG Technical Program Expanded Abstracts (pp. 2440-2444). Tulsa: SEG.
10 Overview of research input and output ‘Computational Mechanics, Structural Mechanics and Dynamics’ related to EM, 2014
10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 5 2 7 2.3
Supporting staff 2) 1 1
PhD 3) 4 26 30 24
Post docs 3 3 1.2
Total 6 6 28 40 27,5 1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 25
Scientific publications: books, chapters in book 0
Scientific publications: refereed proceedings 19
PhD theses 4 * In cooperation with other EM-groups.
11. Keynote lectures and seminars 12. Memberships
12.1 Editorial boards international journals
Prof.dr.ir. L.J. Sluys Editor-in-Chief “HERON” Guest-editor Philosophical Magazine Member Editorial Board “Computers & Concrete” Member Editorial Board “Journal of Multiscale Modelling” Member Review Editorial Board “Frontiers in Materials”
105
Prof.dr. A. Metrikine Deputy Editor-in-Chief “Journal of Sound and Vibration” Member Editorial Board “The International Journal of Railway Technology”
12.2 International scientific committees
Prof.dr.ir. L.J. Sluys Member Managing Board and General Assembly ECCOMAS Member Scientific Committee Civil Engineering and Geomechanics ISTE-Wiley Member General Council IACM (International Association on Computational Mechanics) Prof.dr. A. Metrikine Member of the general Assembly and Scientific Advisory Committee of the SAMCOT (Center for research-based innovation Sustainable Arctic Marine and Coastal Technology )
12.3 National Science Foundation and Academies - 13. Awards, patents and NWO grants - 14. International collaborations -
106
9. RESEARCH DOCUMENTATION OF GROUP APPLIED MECHANICS 1. University/Department University of Twente
Faculty of Engineering Technology 2. Subprogrammes related to research school EM 2.1 Structural Dynamics and Control 2.2 Computational and Experimental Mechanics 3. Group directors
Prof.dr.ir. A. de Boer Prof.dr.ir. A.H. van den Boogaard Prof.dr.ir. T. Tinga
4. Senior academic staff: Prof.dr.ir. A. de Boer Full Professor 0.1 Prof.dr.ir. A.H. van den Boogaard Full Professor 0.4 Prof.dr.ir. T. Tinga Full Professor 0.2 Dr.ir. A.P. Berkhoff Associate Professor 0.1 Dr.ir. M.H.M. Ellenbroek Visiting Associate Professor 0.1 Dr.ir. H.J.M. Geijselaers Associate Professor 0.4 Dr.ir. R. Loendersloot Assistant Professor 0.4 Dr.ir. V.T. Meinders Associate Professor 0.1 Dr.ir. E.S. Perdahcioglu Assistant Professor 0.4 Ir. J.P. Schilder Assistant Professor 0.1 Dr. J. Hazrati Marangalou Assistant Professor 0.2 Dr.ir. Y.H. Wijnant
Assistant Professor Total fte:
0.2 2.7
5. Running PhD-projects in 2015 related to research school EM:
5.1 Structural Dynamics and Control
Bezemer-Krijnen, Ir. M. (PhD 3) Tyre road noise 11-2012 / 11-2016
Le, P. MSc. PDEng. (PhD 3) Dynamics of micro-reaction wheels
*
Sanchez Ramirez, Ir. A. (PhD 3) Wireless Vibration Monitoring 03-2012 / 08-2016
Hwang, J. MSc. (PhD3) Structural Health Monitoring *
107
Hernandez, H. MSc. (PhD 3) Health assessment of water mains
07-2014/06-2018
Schilder, Ir. J.P. (PhD 1) Flexible multi body dynamics 11-2014 / 11-2018*
Farzan Nasab, F. MSc. (PhD 3) Optimization of Thermoplastic structures
01-2015/01-2019
Tajdari, F. MSc. (PhD 3) Acoustics of flat source structures
06-2015/06-2019
Amoiralis, F. MSc. (PhD 3) Predictive maintenance of maritime systems
01-2015/02-2016
Mostafa, N. MSc. (PhD 3) Structural Health Monitoring of railway bridges
07-2015/06-2019
Meghoe, A. MSc. (PhD 3) Physics based predictive maintenance of rail infrastructure
10-2015/09-2019
Cordova Gonzalez, L. MSc.
(PhD 3) Effects of 3D printing technology on maintenance
11-2015/10-2019
*part time
5.2 Computational and Experimental Mechanics
Kooiker, Ir. H. (PhD 3) Modelling of damage and
fracture in microforming 06-2013 / 06-2018*
Mulder, H. Ing. (PhD 3) Directional hardening 10-2010 / 10-2016*
Naseem, S. MSc. (PhD 3) Full process microforming 09-2014 / 09-2018
Torkabadi, Ir. A. (PhD 2) Anelastic deformation of AHSS
05-2014 / 05-2018
Wang, C. MSc. (PhD 3) Damage in hot ring rolling 09-2011 / 11-2015
Havinga, Ir. G.T. (PhD 3) Adaptive process control 10-2011 / 10-2015
Eller, Ir. T.K. (PhD 3) Spot welding hot stamped sheet
12-2012 / 04-2016
Toptop, K. MSc. (PhD 3) Thermomechanical contact of carbon foam
02-2013 / 02-2017
Nejadseyfi, O. MSc. (PhD 2) Material property and process scatter in forming of high strength steels
03-2015 / 03-2019
Asik, E.E. MSc. (PhD 2) Anisotropic damage, physically based modelling
05-2015 / 05-2019
Loiseaux, Ir. J. (PhD 3) Friction in hot stamping 06-2015 / 06-2019
De Vries, Ir. F.H. (PhD 3) Simulation of pipe-laying 10-2015 / 10-2019
Misiun, G. MSc. (PhD 2) Simulation of Selective Laser Melting
12-2015 / 12-2019
*part time
108
6. Postdocs: Computational and Experimental Mechanics
Waanders, Dr.ir. D. (PD 3) PressPerfect 09-2012 / 09-2015
Pjetri, O. MSc (PD 3) Micro Acoustics 10-2015/ 05-2016
7. Dissertations: related to research school EM:
Name: Jong, de J.A. Title: Numerical modelling of thermoacoustic systems Advisor: Boer, A. de Co-advisor: Wijnant, Y.H. Date: 3-7-2015 Current position: 4Silence
8. Short description of sub programmes related to research school EM 8.1 Structural Dynamics and Control (Prof.dr.ir. A. de Boer, Prof.dr.ir. T. Tinga)
The research in this EM subprogramme is directed towards:
Structural dynamics, involving rotating components in machinery and optimisation and actuation of vibrating structures.
Fluid-structure interaction and acoustics, with emphasis on thermal viscous wave propagation and acousto-elastic coupling and the accompanying noise production.
Dynamics Based Maintenance, with focus on vibration based structural health monitoring and physical model based predictive maintenance.
The research of the group aims at generation of new, fundamental knowledge by combining numerical and experimental techniques. Based on this knowledge engineering tools are validated and made ready for application in key industrial problems. A characteristic feature of all themes is the innovative use of advanced numerical simulation methods in a design environment. Crucial information that is difficult or even impossible to obtain from experiments is added through numerical models. Current topics are:
Structural Dynamics (Prof.dr.ir. A. de Boer) (1) Optimization of Dynamic Systems with emphasis on model reduction methods.
Optimization problems concerning complex structures with many design variables may entail an unacceptable computational cost. This problem can be reduced considerably with a multi-level approach; a structure consisting of several components is optimized as a whole (global) as well as on component level. This year a new PhD (Farshad Farzan Nasab) has
109
been started on this topic in the framework of the Dutch TAPAS 2 (Thermoplastic Affordable Primary Aircraft Structure) programme.
(2) Rotor Dynamics and Multi body dynamics Rotating parts in machinery are sources of vibrations and can therefore affect the life time of the rotating part itself and the whole machine drastically. The tendency to optimize the functional performance of structures results in modern designs which often exhibit a minimal weight and very tight safety factors. In 2015 research has been carried out (by PhD P. Le) on performance improvement of micro-reaction wheels. This is done in collaboration with Moog Bradford and TU/e department of Applied Physics. Further in 2014 a new project has been started with the goal to develop methods to couple flexible multi body dynamics with other physical phenomena such as hydraulics and acoustics. In 2015 this research (carried out by PhD J. Schilder) focussed on the coupling of ship movement and water on the one hand and rotating blades with air on the other hand.
Fluid-structure interaction (FSI) and acoustics (Prof.dr.ir. A. de Boer) (1) Viscothermal wave propagation
Together with the Thermal Mechanics group of the University of Twente research is carried out on Thermo-acoustic heat pumps. PhD student Anne de Jong defended the research he did on this topic on July the 3rd 2015 succesfully.
(2) Sound-absorbing materials.
A closely related part of the FSI research program, involves the development of methods and models concerning sound-absorbing materials. Marieke Bezemer focus on the angle dependence of the absorption coefficient for road pavement. In 2015 she used her model for porous pavement for the design of silent pavement. The pavement was constructed and tested. The results are now analysed.
(3) Efficient analysis and measuring methods for source localisation
(4) Thermo-acoustic structural interaction
In june 2015 Farnaz Tajderi started research on the development of flat acoustic source structures driven by multiple controlled energy efficient actuators that can be used to realize a sound source capable of generating low frequency sound to be useful for sound generation and active noise control applications as the secondary source.
Dynamics Based Maintenance (prof.dr.ir. T. Tinga) (1) Structural Health Monitoring (SHM)
Several research projects are conducted on this topic, some of which are in collaboration with Production Technology, Prof.dr.ir. R. Akkerman (see chapter 11 ‘Production Technology’ for more details). Jason Hwang (NLR) started a part-time PhD project, focusing on the development of performance indicators for SHM methods. Within the European WIBRATE project Andrea Sanchez Ramirez further developed her strategy for wireless vibration monitoring of (rotating) systems and complete structures. Neda Mostafa started as a PhD in the H2020 project DestinationRail, developing SHM methods for railway bridges. Hector Hernandez is working in the TTIW Wetsus Water distribution program - InnoWator. The research program of the Technological Top Institute Water, financed by the Dutch government and Dutch industry, focuses on improving the water distribution networks. The
110
InnoWater project, executed by, focuses on ultrasonic measuring technologies to measure the dynamic response of a water pipe during service. The dynamic response provides insight in the age of the material and the resulting remaining life time. This project is in collaboration with Production Technology, Prof.dr.ir. R. Akkerman. See chapter 13 ‘Production Technology’ for more details
(2) Predictive Maintenance
In several projects predictive maintenance methods are developed, mostly focusing on a physical model based approach. By modelling the relevant failure mechanisms, monitored loads on the systems can be used to predict the time to failure and optimize the maintenance program. Filippos Amoiralis, PhD student in the Dinalog funded Maselma project, developed models for maritime systems, specifically focusing on marine diesel engines. Annemieke Meghoe started working on similar methods predicting railway time to failure in a project funded by Strukton. The NWO funded SINTAS project on the impact of additive manufacturing (3D printing) on maintenance decisions and logistic processes was started. Laura Cordova, one of the three PhD students in this project, investigates the durability and life time aspects of parts produced by different AM techniques, which is used as input for the maintenance and logistics optimization models in the other two work packages.
8.2 Computational and Experimental Mechanics (Prof.dr.ir. A.H. van den Boogaard)
The research in this EM subprogramme is directed towards Nonlinear Solid Mechanics. The mission of the Chair Nonlinear Solid Mechanics (NSM) is to develop and experimentally validate advanced numerical methods for the accurate simulation of nonlinear mechanical behaviour, in order to support the industrial needs for optimal and efficient methods for designing and manufacturing of parts and products. The main application areas of the chair are Material Forming Processes
Mechanical behaviour of biological tissues Increased demands for accurate and computationally efficient simulations require that a number of topics have to be addressed:
Improved macroscopic material models Accurate constitutive equations are required in order to predict the final shape of a work piece after forming and subsequent spring back and its subsequent service properties. In particular the effect of the initial and evolving anisotropy, the changes in loading path as present in multi-stage forming processes, the strain rate dependency, the consequences of temperature changes in warm forming processes and the effects of annealing periods between successive forming steps have to be properly accounted for, including the effects of phase transformations. Nonlinear material behaviour in biological materials is related to large visco-elastic deformations in fibrous materials or to fracture phenomena of hard materials like bone. Both types of materials show significant anisotropy. Material properties are commonly determined from uni-axial tensile experiments, but the deformation mode in forming is usually 3-dimensional and non-proportional. Therefore, constitutive models need to be able to consider arbitrary 3D loading paths. Although macroscopic models are required for full-process simulations (regarding CPU-time), development of the models benefits from considering micro-structural evolution and therefore microscopic
111
models are also investigated. Examples of this approach are the modelling of damage and thermal conduction in carbon foam press fittings and the anelastic deformation of steel at unloading. In order to validate material models under multiaxial stress state and arbitrary deformation paths, a biaxial test facility is available. The test facility allows for biaxial loading under simultaneous bi-directional shear and tension/compression of sheet material, including strain path changes and strain rate changes.
Advanced solution algorithms The focus of the sub-programme ‘solution algorithms’ is on efficiency. I.e. increase accuracy of calculations and/or reduction of calculation time. For steady-state type of processes, like rolling and extrusion, the ALE method is developed in this group, where the relevant deformation zone can be modelled in isolation of the non-deforming part of billet or product. For use in optimization or control algorithms, fast simulations are required and Reduced Order Modelling techniques are investigated. Finally, full process chain simulation requires the numerically efficient coupling of several forming stages, often with their own modelling details.
Joining, surfaces, contact and friction Similar as for material modelling, also the surface behaviour must be simulated with high accuracy. This field considers bonding and friction in relation to surface pressure, relative velocities, roughness, temperature et cetera. In a project jointly with the Surface Technology group a friction model that describes the effects of the surface topology on the micro scale in FE simulations on the macro scale was realized. The algorithm incorporating the model is applicable to full-scale automotive sheet metal forming simulations. Currently, this model is extended for use with coated steel and for use in hot stamping. In another project spot welding of press hardened boron steel is investigated. The influence of thermomechanical history in the heat affected zone on the strength is modelled in detail and subsequently transformed into a simplified model for full car-body analysis.
Optimization and control When processes can be modelled accurately enough, the logical next step is to optimize processes by automatic numerical optimization. If robustness is not considered in optimization of forming processes, the resulting optimum is usually critical with respect to constraints. Arbitrary safety margins may be either insufficient or not fully exploit the full potential of the material; therefore the optimization model should include variability in the material properties, tool geometries and process conditions. A methodology for the prediction of the mean and standard deviation in sheet metal forming was developed and coupled to optimization of a process while reaching a required robustness. When tolerances are reduced, a sufficiently robust process setting cannot be found and the process must be actively controlled, based on a model of the process. This model-based control requires extremely fast predictive models, to correct deviations that are measured in-line. Current research focusses on fast interpretation of process data to account for material and process scatter.
112
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Boogaard, A. H. van den, Havinga, G. T. & Tijum, R. van (2015). Model-based control of strip bending in mass production. CIRP annals, (ISSN 0007-8506 & 1726-0604), 64(1), 297-300. 10.1016/j.cirp.2015.04.092 Eyckens, P., Mulder, J., Gawad, J., Vegter, H., Roose, D., Boogaard, A. H. van den, Van Bael, A. & Van Houtte, P. (2015). The prediction of differential hardening behaviour of steels by multi-scale crystal plasticity modelling. International journal of plasticity, (ISSN 0749-6419 & 1879-2154), 73, 119-141. 10.1016/j.ijplas.2014.12.004 Geijselaers, H. J. M., Bor, T. C., Hilkhuijsen, P. & Boogaard, A. H. van den (2015). Cyclic shear behavior of austenitic stainless steel sheet. Computer methods in materials science = Informatyka w Technologii Materialow, (ISSN 1641-8581), 15(1), 9-18. Geijselaers, H. J. M., Hilkhuijsen, P., Bor, T. C. & Boogaard, A. H. van den (2015). Large strain cyclic behavior of metastable austenic stainless steel. Materials science & engineering A, (ISSN 0921-5093 & 1873-4936), 631, 166-172. 10.1016/j.msea.2015.02.047 Ho, Jen-Hsuan & Berkhoff, A. P. (2015). Flat acoustic sources with frequency response correction based on feedback and feed-forward distributed control. Journal of the Acoustical Society of America, (ISSN 0001-4966 & 1520-8524), 137(4), 2080-2088. 10.1121/1.4914997 Hol, J., Meinders, V. T., Geijselaers, H. J. M. & Boogaard, A. H. van den (2015). Multi-scale friction modeling for sheet metal forming: the mixed lubrication regime. Tribology international, (ISSN 0301-679X & 1879-2464), 85, 10-25. http://dx.doi.org/10.1016/j.triboint.2014.12.017 Hol, J. D., Meinders, V. T., Rooij, M. B. de & Boogaard, A. H. van den (2015). Multi-scale friction modeling for sheet metal forming: the boundary lubrication regime. Tribology international, (ISSN 0301-679X & 1879-2464), 81, 112-128. 10.1016/j.triboint.2014.07.015 Jong, J. A. de, Wijnant, Y. H., Wilcox, D. & Boer, A. de (2015). Modeling of thermoacoustic systems using the nonlinear frequency domain method. Journal of the Acoustical Society of America, (ISSN 0001-4966 & 1520-8524), 138(3), 1241-1252. 10.1121/1.4928301 Jonge, Bram de, Klingenberg, Warse, Teunter, Ruud & Tinga, Tiedo (2015). Reducing costs by clustering maintenance activities for multiple critical units. Reliability engineering & system safety, (ISSN 0951-8320 & 1879-0836), 145, 93-103. 10.1016/j.ress.2015.09.003 Liu, S., Bor, T. C., Stelt, A. A. van der, Geijselaers, H. J. M., Kwakernaak, C., Kooijman, A. M., Mol, J. M. C., Akkerman, R. & Boogaard, A. H. van den (2015). Friction surface cladding: An exploratory study of a new solid state cladding process. Journal of materials processing technology, (ISSN 0924-0136), 229, 769-784. 10.1016/j.jmatprotec.2015.10.029 Mulder, J., Vegter, H., Aretz, H., Keller, S. & Boogaard, A. H. van den (2015). Accurate determination of flow curves using the bulge test with optical measuring systems. Journal of
113
materials processing technology, (ISSN 0924-0136), 226, 169-187. 10.1016/j.jmatprotec.2015.06.034 Mulder, J., Vegter, H. & Boogaard, A. H. van den (2015). An engineering approach to strain rate and temperature compensation of the flow stress established by the hydraulic bulge test. Key engineering materials, (ISSN 1013-9826), 651-653, 138-143. doi:10.4028/www.scientific.net/KEM.651-653.138 Ooijevaar, T. H., Rogge, M. D., Loendersloot, R., Warnet, L., Akkerman, R. & Tinga, T. (2015). Nonlinear Dynamic Behavior of an Impact Damaged Composite Skin-Stiffener Structure. Journal of sound and vibration, (ISSN 0022-460X & 1095-8568), 353, 243-258. 10.1016/j.jsv.2015.05.011 Perdahcioglu, E. S., Hou, B. & Boogaard, A. H. van den (2015). Physically based criterion for prediction of instability under stretchbending of sheet metal. Key engineering materials, (ISSN 1013-9826), 651-653, 144-149. 10.4028/www.scientific.net/KEM.651-653.144 Rots, R. van der & Berkhoff, A. P. (2015). Directional loudspeaker arrays for acoustic warning systems with minimised noise pollution. Applied acoustics, (ISSN 0003-682X & 1872-910X), 89, 345-354. 10.1016/j.apacoust.2014.09.024 Schutte, J. H., Wijnant, Y. H. & Boer, A. de (2015). The influence of the horn effect in tyre/road noise. Acta acustica united with Acustica, (ISSN 1610-1928 & 1861-9959), 101(4), 690-700. 10.3813/AAA.918865 Wiebenga, J. H., Atzema, E. H. & Boogaard, A. H. van den (2015). Stretching the limits of forming processes by robust optimization: A numerical and experimental demonstrator. Journal of materials processing technology, (ISSN 0924-0136), 217, 345-355. 10.1016/j.jmatprotec.2014.11.018 Wijker, J. J., Ellenbroek, M. H. M. & Boer, A. de (2015). Force limited random vibration testing: the computation of the semi-empirical constant C2 for a real test article and unknown supporting structure. CEAS space journal, (ISSN 1868-2502 & 1868-2510), 7(3), 359-373. 10.1007/s12567-015-0086-0 Wijker, J. J., Boer, A. de & Ellenbroek, M. H. M. (2015). Force limited vibration testing: an evaluation of the computation of C2 for real load and probabilistic source. Advances in aircraft and spacecraft science, (ISSN 2287-528X & 2287-528X), 2(2), 217-232. 10.12989/aas.2015.2.2.217 Woldman, M., Tinga, T., Heide, E. van der & Masen, M. A. (2015). Abrasive wear based predictive maintenance for systems operating in sandy conditions. Wear, (ISSN 0043-1648 & 1873-2577), 338-339, 316-324. 10.1016/j.wear.2015.07.004
114
9.2 Books, chapters in book
Books:
chapters in book:
Loendersloot, R., Buethe, I., Michaelides, P., Moix Bonet, M. & Lampeas, G. (2015). Damage Identification in Composite Panels - Methodology and Visualisation. In P.C. Woelcken & M. Papadopoulos (Eds.), Smart Intelligent Aircraft Structures (SARISTU): proceedings of the final project conference (pp. 579-604). Springer (ISBN 978-3-319-22413-8).
Moix Bonet, M., Wierach, P., Loendersloot, R. & Bach, M. (2015). Damage Assessment in Composite Structures Based on Acousto-Ultrasonics - Evaluation of Performance. In P.C. Woelcken & M. Papadopoulos (Eds.), Smart Intelligent Aircraft Structures (SARISTU): proceedings of the final project conference (pp. 617-629). Springer (ISBN 978-3-319-22413-8).
9.3 Refereed proceedings Berkhoff, A. P. & Ophem, S. van (2015). Active noise control with fast array recursive least squares filters using a parallel implementation for numerical stability. In C. Glorieux (Ed.), Proceedings Euronoise 2015 (pp. 1-6). Maastricht: EAA.
Bezemer-Krijnen, M., Wijnant, Y. H. & Boer, A. de (2015). Three-dimensional modelling of sound absorption in porous asphalt pavement for oblique incident waves. In C. Glorieux (Ed.), Proceedings of Euronoise 2015 (pp. 1007-1012). European Acoustics Association. Breteler, D., Kaidis, C., Tinga, T. & Loendersloot, R. (2015). Physics based methodology for wind turbine failure detection, diagnostics & prognostics. In A. Rosmi (Ed.), EWEA 2015 (pp. 1-9). Paris: European Wind Energy Association. Eller, T. K., Greve, L., Andres, M. T., Medricky, M., Meinders, V. T. & Boogaard, A. H. van den (2015). Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel. In J. Duflou, A. Leacock, F. Micari & H. Hagenah (Eds.), Sheet Metal 2015 Vol. 639. Key engineering materials, (ISSN 1013-9826) (pp. 369-376). Erlangen-Nürnberg. Havinga, G. T. & Boogaard, A. H. van den (2015). Inverse identification of process variations for thin steel sheet bending. In Material Forming ESAFORM 2015 Vol. 651-653. Key engineering materials, (ISSN 1013-9826) (pp. 1363-1368). Trans Tech Publications. Hwang, J. S., Loendersloot, R. & Tinga, T. (2015). Experimental Evaluation of Vibration-Based Damage Identification Methods on a Composite Aircraft Structure with Internally-Mounted Piezodiaphragm Sensors. In F.K. Chang & A. Guemes (Eds.), Structural Health Monitoring (pp. 1-8). Lancaster, Pennsylvania: Destech Publications Inc (ISBN 978-1-60595-111-9). Jong, J. A. de, Wijnant, Y. H., Boer, A. de & Wilcox, D. (2015). Nonlinear modeling of thermoacoustic systems. In Euronoise 2015 (pp. 527-531). Maastricht.
115
Loendersloot, R. & Moix Bonet, M. (2015). Damage identification in composite panels using guided waves. In F Abbink & C Hermans (Eds.), Proceedings of CEAS 2015 (pp. 1-14). Delft. Moix-bonet, M., Eckstein, B., Loendersloot, R. & Wierach, P. (2015). Identification of barely visible impact damages on a stiffened composite panel with a probability-based approach. In F.K. Chang & A. Guemes (Eds.), Proceedings of IWSHM 10 (pp. 1-8). Lancaster, Pennsylvania: Destech Publications Inc (ISBN 978-1-60595-111-9). Mulder, J., Eyckens, P. & Boogaard, A. H. van den (2015). Differential hardening in IF steel - Experimental results and a crystal plasticity based model. In P. Hora (Ed.), Advanced constitutive models in sheet metal forming (pp. 113-118). Zurich: Institute of Virtual Manufacturing, ETH Zurich (ISBN 978-3-906031-98-9). Rijsdijk, C. & Tinga, T. (2015). Data driven decision support. In Proceedings of the Marine maintenance world expo conference 2015 (pp. 1-6). Antwerpen: UKIP Media & Events Ltd. Rijsdijk, C. & Tinga, T. (2015). Enabling maintenance performance prediction by improving performance indicators. In C. Podofillini & B. Sudret (Eds.), Safety and Reliability of Complex Engineered Systems: ESREL 2015 (pp. 1001-1008). Zurich: CRC Press. Sigvant, M., Hol, J., Chezan, A. R. & Boogaard, A. H. van den (2015). Friction modelling in sheet metal forming simulations: application and validation on an U-Bend product. In P. Hora (Ed.), Advanced constitutive models in sheet metal forming (pp. 135-142). Zurich: Institute of Virtual Manufacturing (ISBN 978-3-906031-98-9). Tiddens, W. W., Braaksma, A. J. J. & Tinga, T. (2015). The adoption of prognostic technologies in maintenance decision making: a multiple case study. In Rajkumar Roy, Ashutosh Tiwari, Kirsten Tracht, Essam Shehab, Jorn Mehnen, John.Ahmet Erkoyuncu, Nikolaos Tapoglou & Tetsuo Tomiyama (Eds.), Proceedings of The Fourth International Conference on Through-life Engineering Services Vol. 38. Procedia CIRP, (ISSN 2212-8271) (pp. 171-176). Elsevier B.V.. Torkabadi, A., Liempt, P. van, Meinders, V. T. & Boogaard, A. H. van den (2015). A constitutive model for the anelastic behavior of Advanced High Strength Steels. In COMPLAS - XIII International Conference on Computational Plasticity: fundamentals and applications (pp. 378-385). Barcelona: CIMNE (ISBN 978-84-944244-6-5).
116
10. Overview of research input and output ‘Applied Mechanics’ related to EM, 2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 11 11 2.7
Supporting staff 2) 3 3
PhD 3) 1 4 20 25 20.0
Post docs 2 2 1.6
Total 15 4 22 41 24.3 1) Sources of financing:
1: University, 2: STW, NWO, FOM, 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 20
Scientific publications: books, chapters in book 2
Scientific publications: refereed proceedings 15
PhD theses 1
* In cooperation with other EM-groups. 11. Keynote lectures and seminars
Boogaard, A. H. van den, Hol, J. & Meinders, V. T. (2015, February 26). Advanced local friction modelling for forming simulations. Dortmund, 18. Workshop Simulation in der Umformtechnik.
Tinga, T. (2015, April 23). Predictive Maintenance - also for electronics ? Delft, Seminar Railtronics - Railforum.
Tinga, T. (2015, September 18). Slimmer onderhoud aan Luchtvaartsystemen. Woensdrecht, Interlogistiekiade - Koninklijke Luchtmacht.
Tinga, T. (2015, October 13). Trends in Smart Maintenance. Hilvarenbeek, Smart Maintenance Congres - Mikrocentrum.
12. Memberships
12.1 Editorial boards international journals
Prof.dr.ir. A.H. van den Boogaard
Associate editor International Journal of Material Forming
Editorial Board of Computer Methods in Materials Science
117
12.2 International scientific committees
Prof.dr.ir. A. de Boer
Member of the Scientific committee of ISMA (International Seminar on Modal Analyses), KU Leuven. Prof.dr.ir. A.H. van den Boogaard • Vice-president European Scientific Association for Material Forming • Member of the Scientific Committee of “Metal Forming” • Member of the Scientific Committee of “IDDRG” • Member of the Scientific Committee of “Shemet” • Member of the Scientific Committee of “ICTP”
Dr.ir. H.J.M. Geijselaers • Member of the Scientific Committee of “Numiform”
Dr.ir. V.T. Meinders • Member of the Scientific Committee of “Esaform” • Member of the Scientific Committee of “Numisheet”
Prof. dr. ir. T. Tinga • Member of the Scientific Committee of the European conference of the Prognostics and
Health Management society Dr.Ir. Y.H. Wijnant • Chairman of local Organizing committee Euronoise 2015 in Maastricht
12.3 National Science Foundation and Academies Prof.dr.ir. A. de Boer • Member of the Koninklijke Hollandsche Maatschappij der Wetenschappen, • Chairman of the NLR advisory committee Aerospace Vehicles • Member of the NLR Advisory Board
Prof.dr.ir. A.H. van den Boogaard • Cluster coordinator “Virtual shaping and structural performance” M2i • Local director of Graduate School Engineering Mechanics
13. Awards, patents and NWO grants
Tinga, T. (2015). Maintenance Awareness Award. UT Maintenance consortium TIME winnaar Maintenance Awareness Award: Breda. Recognition.
118
14. International collaborations: Prof. P. Hora, ETH Zürich, Switzerland Prof. F. Barlat, Postech, Pohang, Republic of Korea Prof. B. Rolfe, Deakin University, Melbourne, Australia Prof. U. Engel, Universität Erlangen, Germany Prof. L.E. Lindgren, Luleå University of Technology, Sweden Prof. W. Desmet, KULeuven, Belgium Dr. M. Masen, Imperial College, London, UK Dr. N. Vriend, University of Cambridge, UK
119
10. RESEARCH DOCUMENTATION OF GROUP SURFACE TECHNOLOGY and TRIBOLOGY
1. University/Department University of Twente
Faculty of Engineering Technology 2. Subprogrammes related to research school EM 2.1 High Tech Systems and Energy 2.2 Health 2.3 Reliability and Durability 3. Group director
Prof.dr.ir. D.J. Schipper 4. Senior academic staff:
Prof.dr.ir. D.J. Schipper Full Professor 0.30 Prof.dr.ir. P.M. Lugt Professor 0.03 Prof.dr.ir. E. van der Heide Professor 0.18 Dr.ir. R. Bosman Assistant Professor 0.15 Dr.ir. D.T.A. Matthews Assistant Professor 0.03 Dr.ir. M.B. de Rooij Associate Professor 0.30 Dr. X. Zeng Assistant Professor 0.30 Total fte: 1.29
5. Running PhD-projects in 2015 related to research school EM: Programme: Reliability and Durability
Akchurin, A. Cyriac, F. Zhou, Y Oomen, M. Wang, C.
(PhD 3) (PhD 3) (PhD 3) (PhD 3) (PhD 3)
Wear model to predict reliability of bearings The impact of water contamination on grease performance Understanding mechanical aging of grease Railway switches Friction in Boundary lubrication regime
10-2012 / 10-2016 09-2012 / 08-2016 08-2014 / 08-2018 10-2013 / 10-2017 02-2016 / 02-2020
120
6. Postdocs:
Jamari, J.
(PD 1)
Dr.ir.
01-2015 / 12-2015
Programme: High Tech Systems and Energy. Bijani, D. Muchammad Setiyana, B. Su, Y. Vries, E.G. de
(PhD 3) (PhD 3) (PhD 3) (PhD 3) (PhD 1)
Belt internal friction modeling in push belt CVT. Lubricated MEMS Abrasive wear resistance of rubber In and out-of-plane strength of hybrid joints Tribology of polymers under vacuum and cryogenic conditions
09-2012 / 08-2016 01-2013 / 10-2017 01-2013 / 10-2017 09-2012 / 08-2016 01-2014 / 01-2018
Ida Ismail (PhD 3) Experimental fiber-fiber interaction
10-2014 / 09-2018
Hilwa Mohd Zini (PhD 3) Friction between fibers 10-2014 / 09-2018 Ernens, D. Mishra, T. Mekicha, M. Alakhramsing, S. Khafidh, M. Bazrafshan, M. Borras, X. Hasib, M.
(PhD 3) (PhD 2) (PhD 3) (PhD 2) (PhD 3) (PhD 2) (PhD 3) (PhD 3)
Metal-metal seals Friction multi-layered metal sheets Wear during strip rolling Cam follower contacts Friction and wear of rubber Surface textures – vacuum Stern tube seals Laser texturing sheets
12-2013 / 11-2017 09-2015 / 09-2019 04-2016 / 04-2020 02-2015 / 02-2019 02-2015 / 02-2019 04-2015 / 04-2019 03-2016 / 03-2020 03-2015 / 03-2019
Programme: Health. Budiwan, I. Klaasen, M.
(PhD 3) (PhD 2)
Prosthetic hip joint implants Surfaces for health
01-2012 / 01-2016 10-2013 / 10-2017
Morales, M. Rodriguez, A. Saputra, E. Zhang, S. Zhang, G. Wu, Y.
(PhD 3) (PhD 3) (PhD 1) (PhD 3) (PhD 3) (PhD 3)
Enhanced Skin Comfort Functionele oppervlakte-texturen op gepoedercoat metaal Prosthetic hip joint implants Steel sheet surfaces with enhanced tactility Low friction suture in medical applications Emulsion lubrication
11-2012 / 10-2016 12-2011 / 11-2016 01-2013 / 01-2017 07-2012 / 06-2016 12-2013 / 11-2017 12-2013 / 11-2017
121
7. Dissertations: Name: Stickel, D. Title: The influence of surface finish on the dissipation power at ultra-mild wear. Advisor: prof.dr. A. Fischer Co-advisor: dr.ir. R. Bosman Date: 2015, October 22 Current position: University of Duisburg-Essen Name: Ya, W. Title: Laser material interactions during cladding: analyses on clad formation, thermal cycles, residual stress and defects. Advisor: prof.dr.ir. D.J. Schipper Co-advisor: dr.ir. B. Pathiraj Date: 2015, October 30 Current position: - Name: Mokhtari, M. Title: The effect of a tribo-modified surface layer on friction in elastomer contacts. Advisor: prof.dr.ir. D.J. Schipper. Co-advisor: - Date: 2015, November 13 Current position: - Name: Winogrodska, A. Title: Pre-sliding behavior of multi asperity ceramic contacts. Advisor: prof.dr.ir. D.J. Schipper. Co-advisor: dr.ir. M.B. de Rooij Date: 2015, December 16 Current position: -
8. Short description of sub programmes related to research school EM The subject of research of the surface technology and tribology group is the interaction between surfaces. The nature of the interaction between the opposing surfaces depends on the operational conditions and therefore the physics describing the interaction is for each situation different. In the figure below the interaction between surfaces is in general depicted. The system researched is represented by envelope I, envelope II (corrosion) is subject within the courses given by the surface technology and tribology group. Based on validated models design “tools” are developed for reliable and accurate prediction of friction and wear. The main subjects are I) High Tech Systems and Energy, II) Health and III) Reliability and Durability (maintenance).
122
Fig. Surface Technology and Tribology. Research platforms and themes, I) High Tech Systems and Energy, II) Health and III) Reliability and Durability.
8.1 High Tech Systems and Energy
The theme high tech systems deals with the realization of contacts in mechanical systems operating in extreme environments. Examples are low temperature, high temperature as well as low pressure (e.g. vacuum systems) and high pressure environments. Although these contact may appear different, there are many similarities. In order to realize such contacts, ceramics, polymers, coatings and surface treatments are required instead of metallic surfaces lubricated with lubricants. If contacts are lubricated, typically solid lubricants are used. Further, in all cases, the environment is significantly influencing the tribological behaviour. The research is performed by a combination of model development and experiments in these extreme environments. Examples, of topics studied in the theme are solid lubrication at high temperatures, bonding in composites and positioning in vacuum systems. A big societal theme which gets a lot of attention nowadays is to make energy available in a sustainable way using sources like wind and sun. However, an efficient use of the available energy does not receive the necessary attention. Within this theme the focus is on the reduction of energy loss. This loss can be the result of frictional losses and/or the waste of components (materials) in mechanical systems. The systems studied are mainly liquid lubricated systems which can be for instance found in the transport industry (automotive and railway) and metal forming industry.
123
8.2 Health
The growth of engineering activities for health care, sports and medical applications has initiated the development of innovative simulation and visualization techniques. This area of industry is e.g. searching for tools that can predict the human perception of products as a function of design optimization parameters. Such tools would also reduce the need for extensive panel testing or for animal testing. Friction and wear in human – product interfaces is considered to be of high importance for such an approach. Successful research requires knowledge on tribology, surface engineering, materials technology, physiology and dermatology, with a clear focus on industrial design. Research on the tribology needed for innovation in engineering of human - product interactions is structured in this theme by combined PhD projects focused on : 1) Skin Friction Fundamentals; 2) Sensing & Control of Friction; and 3 ) Bio Inspired Interfaces. Skin tribology requires in vivo, subject and anatomical location specific test methods, that are developed within research projects. Current predictive friction models can only partially be applied to predict in vivo skin friction. The reason for this is found in limited understanding of contact mechanics at asperity level of product - skin interactions. A recently developed model gives the building blocks for enhanced understanding of friction at micro scale. Only largely simplified power law based equations are currently available as general engineering tools. Surface texturing and polymer brush coatings are promising directions as they provide way and means to tailor friction in sliding contacts without the need of major changes to the product.
8.3 Reliability and Durability
Within the theme durability and reliability the developed knowledge should lead to the prediction and/or extension of maintenance intervals. Initially, the research is directed towards the development of models for wear and lubrication. Physical models make it possible to predict the performance under conditions which cannot be tested, either because of unacceptable high costs, or because of unacceptable duration. Wear models predict the transition from mild to severe wear and wear rates as a function of the operating conditions. Applications are wheel-rail contact, camshaft follower contacts, gears, rolling bearings and plain bearings. The wear models combine the response of the material and lubricant on severe operating conditions. The lubrication models are developed to predict re-lubrication intervals. This work is primarily done for lubricating greases. Much work is done on understanding and modeling the rheology of grease and on the development of film thickness models for grease lubrication. The lubrication and wear models should be integrated into durability models which can be used to calculate the reliability or life-time of equipment. Special attention will be paid to so-called “early failures”, i.e. failures that do not fit into the failure distribution function corresponding to the expected failure mode. In the future, the interaction between the tribological phenomena in the various elements of a machine in combination with dynamic behaviour (varying operating conditions, start-stops etc.) on reliability and durability will be studied.
124
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Hendrikson, W.J., Zeng, X., Rouwkema, J., Blitterswijk, C.A. van, Heide, E. van der & Moroni, L.
(2015). Biological and Tribological Assessment of Poly (Ethylene Oxide Terephthalate) / Poly
(Butylene Terephthalate), Polycaprolactone, and Poly (L\DL) Lactic Acid Plotted Scaffolds for
Skeletal Tissue Regeneration. Advanced healthcare materials, 5(2), 232-243.
Hol, J.D., Meinders, V.T., Rooij, M.B. de & Boogaard, A.H. van den (2015). Multi-scale friction
modeling for sheet metal forming: the boundary lubrication regime. Tribology international, 81,
112-128.
Ismail, R., Prasojo, T., Tauviqirrahman, M., Jamari, J. & Schipper, D.J. (2015). Numerical
Investigation of the Plastic Contact Deformation between Hemispheres: Variation of Radii Ratio
and Normal Loads. Advanced materials research, 1123, 16-19.
Jamari, J. & Schipper, D.J. (2015). The effect of component thickness on the flattening of surface
asperities. Jurnal Teknologi, 77(1), 119-125.
Jamari, J., Hidayat, A., Saputra, E., Anwar, I.B., Ismail, R. & Heide, E. van der (2015). The effect of
the wall tickness on war of an UHMWPE acetabular liner. Advanced materials research, 1123,
196-200.
Kuilenburg, J. van, Masen, M.A. & Heide, E. van der (2015). A review of fingerpad contact
mechanics and friction and how this affects tactile perception. Proceedings of the Institution of
Mechanical Engineers. Part J: Journal of engineering tribology, 229(3), 243-258.
Li, Zhipeng, Zhang, Yawen, Ren, Tianhui, Zeng, X., Heide, E. van der & Zhao, Yidong (2015). The
tribological performance of a long chain alkyl phenylboric ammonium derivative and its
interaction with ZDDP. Proceedings of the Institution of Mechanical Engineers. Part J: Journal of
engineering tribology, 1-9.
Mokhtari, M., Schipper, D.J., Vleugels, N. & Noordermeer, J.W.M. (2015). Existence of a Tribo-
Modified Surface Layer on SBR Elastomers: Balance between Formation and Wear of the
Modified Layer. Tribology letters, 58(2).
Morales Hurtado, M., Zeng, X., Gonzalez Rodriguez, P., Elshof, J.E. ten & Heide, E. van der (2015).
A new water absorbable mechanical epidermal skin equivalent: the combination of hydrophobic
PDMS and hydrophilic PVA hydrogel. Journal of the mechanical behavior of biomedical materials,
46, 305-317.
125
Muchammad, M., Tauviqirrahman, M., Jamari, J. & Schipper, D.J. (2015). Load support
Improvement on Superhydropobic Surface in Lubracated -MEMS using Numerical Investigation.
Advanced materials research, 1123, 3-6.
Saputra, E., Anwar, I.B., Jamari, J. & Heide, E. van der (2015). A Bipolar Artificial Hip Joint Design
for Contact Impingement Reduction. Advanced materials research, 1123, 164-168.
Tauviqirrahman, M., Muchammad, M., Ismail, R., Jamari, J. & Schipper, D.J. (2015). The Effect of
a Hydrophobic Coating Material on Friction in a Micro-Slider Bearing: A Numerical Analysis.
Advanced materials research, 1123, 42-45.
Woldman, M., Tinga, T., Heide, E. van der & Masen, M.A. (2015). Abrasive wear based predictive
maintenance for systems operating in sandy conditions. Wear, 338-339, 316-324.
Yan, J., Zeng, X., Ren, Tianhui & Heide, E. van der (2015). Exploring an alternative aqueous
lubrication concept for biomedical applications: Hydration lubrication based on O/W emulsions
combined with graphene oxide. BioSurface and biotribology, 1(2), 113-123.
Zhang, S., Rodriguez Urribarri, A.C., Morales Hurtado, M., Zeng, X. & Heide, E. van der (2015).
The role of the sliding direction against a grooved channel texture on tool steel: An experimental
study on tactile friction. International journal of solids and structures, 56-57, 53-61.
Akchurin, A, Bosman, R, Lugt, P.M, Van Drogen, M. (2015), On a model for the prediction of the
friction coefficient in mixed lubrication based on a load-sharing concept with measured surface
roughness, Tribology Letters, Vol 59 (1), pp. 19.
Stickel, D, Fischer, A, Bosman, R, (2015), Specific dissipated friction power distributions of
machined carburized martensitic steel surface during running-in, Wear, Vol (330-331), pp 32-41.
Cyriac, F, Lugt, P.M. Bosman,R (2015), On a New Method to Determine the Yield stress in
Lubricatin Grease, Tribology Transactions, Vol 58, pp. 1021-1030.
9.2 Books, chapters in book
Chapter in book:
Morales Hurtado, M., Zeng, X. & Heide, E. van der (2015). The human skin and hydration. In
Yoshitaka Nakanishi (Ed.), Hydrated Materials (pp. 41-69). Singapore: Pan Stanford Publishing.
Rooij, M.B. de, Valefi, M. & Song, J. (2015). Mechanical and Thermally activated self healing
surfaces made of composite ceramics for mechanical components. In S. van der Zwaag & E.
Brinkman (Eds.), Self Healing Materials (pp. 109-114). Springer Netherlands.
126
9.3 Proceedings
Anwar, I.B., Saputra, E., Ismail, R., Jamari, J. & Heide, E. van der (2015). Study on the
biocompatibility and wear of stainless steel 316L and UHMWPE materials. In Mariyam Jameelah
Binti Ghazali & Mohd Fadzli Bin Abdollah (Eds.), Proceedings of Malaysian International
Tribology Conference 2015 (pp. 56-58). Kuala Lumpur, Malaysia: Malaysian Tribology Society.
Bekke, D.A., Wijnant, Y.H., Schipper, D.J., Bobbink, B., Lansink, G. oude & Stevens, R. (2015).
Silent and safe roadtrafic project: an optimization of the tyre-road interaction on noise and wet
grip. In D. Botteldooren & Y. Wijant (Eds.), Proceedings of EuroNoise 2015 (pp. 1345-1350).
Maastricht.
Ismail, N., Vries, E.G. de, Rooij, M.B. de, Zini, N.H.M. & Schipper, D.J. (2015). Friction in fiber-
fiber contact : An experimental setup. In Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin
Abdollah (Eds.), Proceedings of Malaysian International Tribology Conference 2015 (pp. 135-
136). Kuala Lumpur, Malysia: Malaysian Tribology Society.
Mokhtari, M., Schipper, D.J., Vleugels, N. & Noordermeer, J.W.M. (2015). Contact mechanics
and friction for transversely isotropic viscoelastic materials. In S. Yoshimoto & H. Hashimoto
(Eds.), International Tribology Conference 2015 (ITO) (pp. 34-35). Tokyo, Japan: Japanse Society
of Tribologists.
Morales Hurtado, M., Zeng, X., Peppelman, P., Erp, P. van & Heide, E. van der (2015). The
Tribological Behaviour of a Newly Developed Water Absorbable Skin Equivalent Compared to
Isolated Human Skin during Sliding. In International Tribology Conference ITC 2015. Tokyo, Japan:
Japanse Society of Tribogists.
Muchammad, M., Tauviqirrahman, M., Pratomo, A.W., Jamari, J. & Schipper, D.J. (2015). The
Beneficial Effect of Superhydropobic Layer Addition on Lubrication Behavior in Bearing
Application. In S.K. Sutikno (Ed.), International Conference on Advance Materials Science and
Technology (ICAMST). Semarang, Indonesia.
Muchammad, M., Tauviqirrahman, M., Pratomo, A.W., Jamari, J. & Schipper, D.J. (2015). The
Effect of Boundary Slip and Cavitation on Hydrodynamic Pressure Generation in Pocket Bearings.
In S.K. Sutikno (Ed.), International Conference on Advance Materials Science and Technology
(ICAMST). Semarang, Indonesia.
Muchammad, M., Tauviqirrahman, M., Pratomo, A.W., Jamari, J. & Schipper, D.J. (2015).
Theoretical Investigation of Texture Depth Effect on the Lubrication Performance in Slip
Pocketed Bearing Including Cavitation. In Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin
127
Abdollah (Eds.), Proceedings of Malaysian International Tribology Conference 2015 (pp. 251-
252). Kuala Lumpur, Malaysia: MYTRIBOS.
Saputra, E., Anwar, I.B., Ismail, R., Jamari, J. & Heide, E. van der (2015). The effect of the wear
rate on impingement failure confirming the relation between impingement failure and wear of
the acetabular liner surface based on finite element simulation. In Mariyam Jameelah Binti
Ghazali & Mohd Fadzli Bin Abdollah (Eds.), Proceedings of Malaysian International Tribology
Conference 2015 (pp. 54-55). Kuala Lumpur, Malaysia: Malaysian Tribology Society.
Woldman, M., Tinga, T., Heide, E. van der & Masen, M.A. (2015). Implementation of a model for
abrasive wear to develop a predictive maintenance concept for systems operating in sandy
conditions. In P. Filip (Ed.), 20th International Conference on Wear of Materials. Toronto,
Canada: Elsevier.
Zeng, X., Zhang, S., Rodriguez Urribarri, A.C. & Heide, E. van der (2015). Tactile friction of laser
textured surfaces. In W. Huang, H. Kobayashi, F. Montemor, R. Opila & P. Schaaf (Eds.), 1st
International Conference on Applied Surface Science (ICASS). Shanghai, China: Elsevier.
10 Overview of research input and output ‘Tribology’ related to EM, 2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 5 2 7 1.29
Supporting staff 2) 3 3 -
PhD 3) 2 4 22 28 22.4
Post docs 1 1 0.8
Total 11 4 24 39 24.49
1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 18
Scientific publications: chapters in book 2
Scientific publications: proceedings 11
PhD theses 4
128
11. Keynote lectures and seminars -
12. Memberships
12.1 Editorial boards international journals -
12.2 International scientific committees -
12.3 National Science Foundation and Academies - 13. Awards, patents and NWO grants 14. International collaborations:
Imperial College, London, UK, Dr. M.A. Masen, PhD project. University of Shanghai SJTU, Shanghai, China, Prof. T. Ren, PhD project. University of Diponegoro, Semarang, Indonesia, Dr. J. Jamari, PhD project. University of Essen, Essen, Germany, Prof. A. Fischer, PhD project. University of Ghent, Ghent, Belgium, Prof. P. de Baets.
129
11. RESEARCH DOCUMENTATION OF GROUP PRODUCTION TECHNOLOGY
1. University/Faculty
University of Twente
Faculty of Engineering Technology
2. Subprogrammes related to research school EM
2.1 Automated Composites Manufacturing
2.2 Performance of Advanced Materials
3. Group director
Prof.dr.ir. R. Akkerman
4. Senior academic staff:
Akkerman, Prof.dr.ir. R. Full Professor 0.3 Baran, Dr.ir. I. Assistant Professor 0.3 Bor, Dr.ir. T.C. Assistant Professor 0.3 Visser, Dr.ir. H.A. Assistant Professor 0.3 Warnet, Dr.ir. L. Assistent Professor 0.3 Total fte: 1.5
5. Running PhD project in 2015 related to research school EM:
5.1. Automated Composites Manufacturing
Kok, ir. T. (PhD 3) Fibre Placement 01-2014 / 12-2017
Wolthuizen, Ir. D. (PhD 3) Multilayer Elements 12-2011 / 06-2016
Ravenhorst, ir. J.H. (PhD 3) Overbraiding 01-2010 / 12-2016
5.2. Performance of Advanced Materials
Abdul Rasheed, M.I. MSc (PhD 3) Compression Molding 05-2012 / 06-2016
Sachetti, F. MSc (PhD 3) Advanced Joining Methods 06-2013 / 05-2017
Shaojie Liu, MSc (PhD 3) Friction Surface Cladding I 09-2012 / 08-2016
Yussof, I. MSc (PhD 3) Friction Surface Cladding II 03-2015 / 03-2019
Vincent, G. MSc. (PhD 3) Recycling of thermoplastic composites
09-2015 / 09-2019
Slange, T. MSc (PhD 3) Stamp forming 01-2015 / 01-2019
130
6. Postdocs:
Jansma, ir. S. High Yields Low Loads Enlarged Rotor June 2014 – November 2016
06-2014 / 11-2016
7. Dissertations: related to research school EM:
Name: Drenth, E. Title: Towards condition based asset management of uPVC pipes Advisor: Prof. R. Akkerman, Date: 2015
8. Short description of subprogrammes related to research school EM Research in the Production Technology group addresses the technical issues of new products and new processes. The group focuses on the optimisation of both the manufacturing process and the product performance. ‘Processing’ and ‘Product performance’ of lightweight materials in structural applications characterise the main research themes of the Production Technology group. In our view processing and performance can be optimised after thorough analysis and modelling in combination with a firm experimental programme. The experiments identify the operating mechanisms, establish relevant material property data for the modelling and provide data to test the accuracy of the models proposed. An integral approach is pursued, taking into account the interrelations between the geometric design, the production process and the material properties. The Thermoplastic composites Research Center TPRC, hosted by the group of Production Technology, continued to grow with additional members, leading to a gradual increase in research and number of PhD students. An EU funded HORIZON-2020 project “ambliFibre” has been started since September 2015. The mission of ambliFibre is to develop and validate the first model-based laser-assisted tape winding system for the manufacturing of tubular thermoplastic FRP parts. Production Technology is leading the Work Package 3 in which multi-physics based numerical process models will be developed for inline automated process control and virtual simulations of the laser assisted tape winding process of thermoplastic composites.
8.1 Automated Composites Manufacturing The first research theme is concerned with the cost-effective application of advanced continuous fibre reinforced composites. The breakthrough of this type of materials in various applications has occurred to a smaller extent than might have been expected, mainly due to their high costs of manufacturing. Thermoplastic composites in particular have the potential to overcome these hurdles. In general, research in the PT group starts from a thorough analysis of the deformation and flow mechanisms involved during manufacturing and the modelling of these mechanisms. Design tools are developed to support the production of composite structures with modern techniques. The aim of these design tools is mostly to optimise the processing conditions in order to obtain a composite component having a prescribed shape or combination of materials properties.
High Precision Composites Moulding Forming simulations are needed to shorten the development time of novel composite products. This requires better constitutive models, better characterisation techniques and dedicated model
131
implementation. In this context, Ir. Van Ravenhorst continued the development of a circular braiding process simulation model to predict the fibre orientation and -distribution on arbitrary mandrels. He attempted to describe the non-axisymmetrical biaxial braiding process including yarn-to-yarn interaction including friction using a numerical derivative-free non-smooth non-linearly constrained non-linear optimization method. Within TPRC, Ir. Kok continued his PhD research on the laser assisted tape placement process, looking specifically into the generation of defects (porosities, and their effect on the interlaminar bonding) during fast tape deposition; with the aim to optimise the process and the resulting material performance. Ir. Wolthuizen continued his research (also funded by TPRC) on a multilayered shell element for composites forming. A procedure was developed to resolve the intra-ply shear locking phenomenon in triangular elements with extreme anisotropy. The procedure will be implemented in a finite element code suited for large scale computations. Dr Baran, who graduated in 2014, won the “ESAFORM PhD Prize for Industrial Research 2015” as well as the “Young Scientist Award” from the Danish Plastics Federation (Denmark) for his research on the pultrusion process. Within the PT group, he is mainly working on the numerical modelling of composite manufacturing processes with a focus on predicting the process induced residual stresses. Efficient wind turbine blade manufacturing Ir. Sybren Jansma has been developing new production techniques to produce (parts of) a thermoset windmill blade in particular the tip section. This is a necessary step to introduce new concepts for splitting blades which are beneficial for large wind turbines. Moreover, he has also been investigating the methods to connect the tip section to the main part of a wind turbine blade. This research concerns detailing and testing connection types from macro to micro level. Stamp forming process Within TPRC, Ir. Tjitse Slange started with his PhD research on the stamp forming of tailored thermoplastic composite blanks, with a focus on the evolution of consolidation quality (void content, crystallinity, bond strength) during the stamp forming process. The aim is to optimize the process and improve final part quality.
8.2 Performance of Advanced Materials The second research theme involves a better understanding of the mechanics of new materials, focusing on the physical properties of the component and taking into account the production process used. An increasing range of properties is being considered, from thermo-mechanical properties such as stiffness and structural integrity, to optical and electromagnetic properties on the short and the long term. Materials with ‘added functionality’ (e.g. composites with integrated sensors and actuators or even self-healing capacity) receive growing interest. The current research projects in this theme are:
recycling of thermoplastic composites
friction surface cladding of light metals
thermoplastic composite joints
sustainable materials
Recycling of thermoplastic composites Ir. Guillaume Vincent started to work on the recycling of thermoplastic composites within TPRC. Thermoplastic composites are inherently easier to recycle than their thermoset counterparts, since both the fibre and matrix material can be recycled and fibre reclamation is not required. Within this project, the recycling loop of post-industrial thermoplastic composite waste will be studied, from shredding to re-processing. The main objective is to determine processing conditions of the total recycling loop from cutting to re-manufacturing, that lead to maximal cost effectiveness and minimal
132
environmental impact.
Friction Surface Cladding Friction surface cladding (FSC) is a solid state process to deposit thin metallic layers on substrates. It is primarily developed to improve the corrosion resistance of the workpiece surface, as described by Dr. van der Stelt in his PhD thesis who graduated from the PT group in 2014. The process parameters involved in FSC are currently being studied by S. Liu MSc. The process window has been determined for different cladding tools via an experimental approach. This cladding process can also be extended to additive manufacturing like 3D printing in the solid state and more material combinations, as being studied by MSc. I. Yussof. Thermoplastic Composite Joints F. Sacchetti continued his research on the characterisation of the bonding strength, examining the effect of different manufacturing processes on the joint performance. such as ultrasonic welding, autoclave consolidation and press consolidation. The scope of this project is to establish mechanical testing procedures to characterize the performance of different fusion bonding methods for thermoplastic composites materials. Existing and novel testing methodologies will be investigated for their applicability to characterize joint performance. Proper selection of a testing technique, however, requires a good understanding of all factors affecting the measured property. Apart from intimate contact development and polymer diffusion, these factors may include interface architecture, polymer crystallinity and surface pre-treatment methods. The important factors governing the measured results will be identified through a combination of comprehensive analytical and experimental work. Sustainable materials Sustainable and bio-based materials are getting more and more attraction. Iqbal Rasheed MSc continued his work on compression moulding of woven thermoplastic composite flakes, that may originate from production waste during composites processing or end-of-life scrap, now with TPRC funding. Experimental and theoretical studies were performed to understand the material behaviour in terms of processing and mechanical performance. This enables to improve the understanding and control of the compression moulding process. A full-scale part was manufactured with integrated features like ribs, joggles, as well as moulded holes and thickness transitions to demonstrate the capabilities of the material and the developed process. With his work, Iqbal won the “Outstanding Paper Award”, CAMX –The Composites and Advanced Materials Expo”, 2015.
All activities within the programme are related to the research theme “Computational and Experimental Mechanics”.
9. Refereed scientific publications related to research school EM
9.1 Refereed journals Ramakrishna, S.N. and Cirelli, M. and Kooij, E.S. and Gunnewiek, M.K. and Benetti, E.M. (2015) Amplified responsiveness of multi-layered, polymer grafts: Synergy between brushes and hydrogels. Macromolecules, 48 (19). 7106 - 7116. ISSN 0024-9297 Agnelli, S. and Baldi, F. and Blackman, B.R.K. and Castellani, L. and Frontini, P.M. and Laiarinandrasana, L. and Pegoretti, A. and Rink, M. and Salazar, A. and Visser, H.A. (2015) Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise. Polymer testing, 44 . 72 - 81. ISSN 0142-9418
133
Carlone, Pierpaolo and Baran, I. and Akkerman, R. and Palazzo, Gaetano S. (2015) Computational analysis of the interaction between impregnation, forming and curing in pultrusion. Key engineering materials, 651-653 (651-653). 889 - 894. ISSN 1013-9826 Camp, W. van de and Dhalle, M.M.J. and Wessel, W.A.J. and Warnet, L. and Atli-Veltin, B. and Putten, S. van der and Dam, J.A.M. and Brake, H.J.M. ter (2015) Cryogenic fatigue and stress-strain behavior of a fibre metal laminate. Physics procedia, 67 . 1043 - 1049. ISSN 1875-3892 Baran, I. and Hattel, Jesper H. and Akkerman, R. (2015) Investigation of process induced warpage for pultrusion of a rectangular hollow profile. Composites. Part B : Engineering, 68 . 365 - 374. ISSN 1359-8368 Baran, I. and Jakobsen, Johnny and Andreasen, Jens H. and Akkerman, R. (2015) Investigation of the Residual Stress State in an Epoxy Based Specimen. Key engineering materials, 651-653 (651-653). 375 - 380. ISSN 1013-9826 Baran, Ismet and Hattel, Jesper H. and Akkerman, Remko and Tutum, Cem C. (2015) Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches. Applied composite materials, 22 (1). 99 - 118. ISSN 0929-189X Ooijevaar, T.H. and Rogge, M.D. and Loendersloot, R. and Warnet, L. and Akkerman, R. and Tinga, T. (2015) Nonlinear Dynamic Behavior of an Impact Damaged Composite Skin-Stiffener Structure. Journal of sound and vibration, 353 . 243 - 258. ISSN 0022-460X Baran, Ismet and Tutum, Cem C. and Hattel, Jesper H. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation. International journal of material forming, 8 (3). 379 - 389. ISSN 1960-6206 Baran, Ismet and Hattel, Jesper H. and Tutum, Cem C. and Akkerman, Remko (2015) Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario. International journal of material forming, 8 (3). 367 - 378. ISSN 1960-6206 Kotanjac, Z. and Lefferts, L. and Koissin, V. and Warnet, L. and Akkerman, R. (2015) Synthesis of Carbon Nanofibers on Large Woven Cloth. C : Journal of carbon research, 1 (1). 2 - 15. ISSN 2311-5629 Geijselaers, H.J.M. and Bor, T.C. and Hilkhuijsen, P. and Boogaard, A.H. van den (2015) Cyclic shear behavior of austenitic stainless steel sheet. Computer methods in materials science = Informatyka w Technologii Materialow, 15 (1). 9 - 18. ISSN 1641-8581 Liu, S.J. and Bor, T.C. and Stelt, A.A. van der and Geijselaers, H.J.M. and Kwakernaak, C. and Kooijman, A.M. and Mol, J.M.C. and Akkerman, R. and Boogaard, A.H. van den (2015) Friction surface cladding: An exploratory study of a new solid state cladding process. Journal of materials processing technology, 229 . 769 - 784. ISSN 0924-0136 Scorticati, D. and Illiberi, A. and Bor, T.C. and Eijt, S.W.H. and Schut, H. and Römer, G.R.B.E. and Klein Gunnewiek, Michel and Lenferink, A.T.M. and Kniknie, B. and Joy, R.M. and Dorenkamper, M.S. and Lange, D.F. de and Otto, C. and Borsa, D. and Soppe, W.J. and Huis in 't Veld, A.J. (2015) Thermal annealing using ultra-short laser pulses to improve the electrical properties of Al:ZnO thin films. Acta materialia, 98 . 327 - 335. ISSN 1359-6454
134
9.2 Books, chapters in book - Baran I. Pultrusion: State-of-the-art Process Models. Smithers Rapra, Shropshire, UK, 2015, 248 pages. ISBN: 978-1-91024-242-1.
- Baran I. Pultrusion processes for composite manufacture. In: Boisse P. editor. Advances in Composites Manufacturing and Process Design. Woodhead Publishing, Cambridge, UK, 2015. ISBN: 978-1-78242-
9.3 Refereed proceedings
Abdul Rasheed, M.I. and Rietman, A.D. and Visser, H.A. and Akkerman, R. (2015) A parametric study on compression molding of reference parts with integrated features using carbon composite production waste. In: ESAFORM 2015, 15-04-2015 - 17-04-2015, Graz, (pp. 458 - 463).
Liu, S.J. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2015) Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate. In: FSWP'2015, 01-10-2015 - 02-10-2015, San Sebastian, Spain.
Baran, I. and Warnet, L. and Akkerman, R. (2015) On the mechanical behaviour of a butt jointed thermoplastic composite under bending. In: 20th International Conference on Composite Materials, ICCM20, 19-07-2015 - 24-07-2015, Copenhagen.
Liu, S.J. and Bor, T.C. and Geijselaers, H.J.M. and Akkerman, R. (2015) Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness. In: IDDRG 2015, 31-05-2015 - 03-06-2015, Shanghai. Qin, J. and Wu, Y. and Liao, G. and Zhou, C. and Nijhuis, A. and Liu, S. (2015) Cable Rotation and Twist Pitch Variation for ITER TF Conductor in China. IEEE transactions on applied superconductivity, 25 (3). p. 8800204. ISSN 1051-8223
10. Overview of research input and output “Production Technology” related to EM, 2015
10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 5 - - 5 1.5
Supporting staff 2) 2 - - 2 -
PhD 3) - - 9 9 7.2
Postdocs - - 1 1 0.5
Total 7 0 10 17 9.2 1) Sources of financing: 1: University 2: STW, SON, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc.
2) No research input involved for supporting staff.
3) Research input for PhD per year: 0.8 fte
135
10.2 Output
Total
Scientific publications: refereed journals 14
Scientific publications: books, chapters in book 2
Scientific publications: refereed proceedings 5
PhD theses 1
11. Keynote lectures and seminars -
12. Memberships
12.1 Editorial boards international journals Prof.dr.ir. R. Akkerman: Composites Structures, International Journal of Material Forming. Dr.ir. I. Baran: Advances in Mechanical Engineering
12.2 International scientific committees Prof.dr.ir. R. Akkerman: Secretary of the European Association of Material Forming ESAFORM Scientific committee of FPCM, Flow Processes in Composite Materials Scientific committee of Texcomp, Textile Composites
Dr.ir. L. Warnet: scientific committee of the ESIS TC4 Conference on the Fracture of Polymers, Composites and Adhesives Dr.ir. I. Baran: scientific committee of the 17th European Conference on Composite Materials (ECCM17)
12.3 National Science Foundation and Academies Prof.dr.ir. R. Akkerman:
Koninklijke Hollandse Maatschappij der Wetenschappen 13. Awards, patents and NWO grants Dr.ir. I. Baran:
“ESAFORM PhD Prize for Industrial Research 2015”, European Scientific Association for Material Forming “Young Scientist Award”, The Danish Plastics Federation – Composites Section, Denmark Finalist “ECCOMAS Best PhD Thesis Award”, European Community on Computational Methods in Applied Sciences
M.I. Abdul Rasheed: “Outstanding Paper Award”, CAMX –The Composites and Advanced Materials Expo”, 2015
136
14. International collaborations:
Host of TPRC – an international public-private research centre on thermoplastic composites (current members: Boeing, Fokker Aerostructures, Ten Cate Advanced Composites, DTC, Pinette, Instron, Coriolis Composites, AFS, Aniform, Technical University of Delft, Saxion University of Applied Sciences, University of Twente, KVE). URL: www.tprc.nl
Active member of the world wide forum for composite forming, investigating textile composite characterisation and forming simulations.
EU-programmes: Horizon2020 ambliFibre project, FP7 project FibreChain (18 partners), JTI Clean Sky.
137
12. RESEARCH DOCUMENTATION OF THE GROUP MULTI SCALE MECHANICS
1. University/Department University of Twente
Faculty of Engineering Technology
2. Subprogrammes related to research school EM 2.1 Multiscale simulation techniques 2.2 Bridging the gap between particulate systems and continuum theory 2.3 Wave propagation applied to gas/oil exploration, production, and processing 2.4 Multiscale analysis of particle processes 2.5 Shaping segregation - Continuum modeling of segregation in particulate systems 2.6 Discrete particle and self-healing material models 2.7 Micromechanical modeling of asphalt 3. Group directors
Prof. dr. S. Luding
4. Senior academic staff:
5. Running PhD-projects in 2015 related to research school EM: Wave propagation applied to gas/oil exploration, production, and processing
Gueven, I. Detection and guidance of nanoparticles for enhanced oil recovery
01-2012 / 12-2015
Shrivastava, R.K. Computational science for gas/oil exploration, production, and processing
03-2014 / 03-2018
Dr. V. Magnanimo Assistant professor 0.4 Dr. W. den Otter Assistant professor 0.2 Dr. H. Steeb Visiting Professor 0.04 Dr. A. Thornton Associate professor 0.4 Dr. T. Weinhart Assistant professor 0.4 Prof. dr. S. Luding Full Professor 0.2
Total fte: 1.64
138
Multiscale analysis of particle processes
Shi, H. DEM simulations and experimental validation of tableting processes
09-2014 / 09-2017
Taghizadeh Bajgirani, K. Constitutive modelling for adhesive granular solids
11-2014 / 11-2017
Shaping segregation
van der Horn, B. Continuum modeling of segregation in particulate systems
11-2014 / 01-2016
6. Postdocs:
Saitoh, Dr. K (half time in EM)
Bridging the gap between particulate systems and continuum theory
04-2011 / 12-2015
Imole, Dr. O.I (half time in EM)
Bridging the gap between particulate systems and continuum theory
04-2014 / 04-2016
Kumar, Dr. N. (half time in EM)
Bridging the gap between particulate systems and continuum theory
06-2014 / 05-2016
Singh, A. (half time in EM)
Bridging the gap between particulate systems and continuum theory
05-2014 /05-2015
Khamseh, Dr. S. (half time in EM)
Bridging the gap between particulate systems and continuum theory
07-2014 / 02-2015
Vescovi, Dr. D. (half time in EM)
Bridging the gap between particulate systems and continuum theory
02-2015 / 04-2016
139
Tunuguntla, Dr. D (half time in EM)
Continuum modeling of segregation in particulate systems
09-2015 / 09-2017
Windows-Yule, Dr. C.R. (half time in EM)
Continuum modeling of segregation in particulate systems
05-2015 / 05-2017
7. Dissertations: related to research school EM:
- 8. Short description of sub programmes related to research school EM
8.1 Multiscale simulation techniques
The discrete element method (DEM) is used extensively for the simulation of granular materials and in powder technology. Averaging or coarse graining (CG) techniques, also referred to as the micro–macro transition, are applied to the particle data from DEM simulations to extract bulk continuum fields such as density, velocity and stress, which are important for the design of a great majority of engineering applications. The major aim of this work is to answer the question about temporal and spatial averaging scales, and what is their influence on the micro–macro projected continuum fields. Those scale often very between different engineering processes. Final goal is to enhance the way of coupling between particle and continuum methods for multi-scale modeling, not only relying on a future increase of available computing power, but also keeping massive parallelization in mind. At the same time, hierarchical hash tables and multilevel grids for efficient simulation of poly-disperse systems and FEM/DEM coupling for fluid particle interaction problems e.g. porous media, fluidized beds is being developed in the MSM group.
8.2 Bridging the gap between particulate systems and continuum theory
Particulate systems can be found in our daily life, as sand on the beach and as food - like muesli - in the kitchen. They are everywhere in nature and constitute over 75% of all raw material to industry. The particles in these materials interact and move together, which leads to unpredictable segregation phenomena - like in the muesli, where the large parts float on the top. Sometimes this also leads to fatal phenomena like landslides or snow-avalanches, which must be avoided or at least predicted. These particles can only be understood and predicted by using modern particle models and computer-programs, but continuum theory is used in engineering and design for almost all applications, because there are too many particles involved. Therefore, both pictures have to be combined and the gap between them has to be bridged in order to avoid problems, improve safety and enhance many the products we use every day.The VICI project is almost ended and great results have been achieved on the challenge bridging the gap between particles and continuous systems – where especially, stochastic and mesoscale methods are essential pillars supporting the bridge.
8.3 Wave propagation applied to gas/oil exploration, production, and processing
The project goal is to apply advanced computational science tools to predict flow, permeability, and nonlinear wave propagation through gas/oil-reservoirs to enhance efficient exploration, evaluation, and production – as well as energy efficient processing and storage. The multi-scale
140
approach starts at the disordered grain/particle/porous-structure scale, cross-couples the high-pressure multi-phase fluid thermochemistry and -mechanics, and targets at the larger, seismic/reservoir length-scales. As motivation, in underground exploration of energy-related resources, only low frequency modes are visible, i.e. small length scales disturb transport and wave propagation. The challenge is to model this multi-scale problem, which requires innovation in computational science for understanding and interpreting non-linear wave-propagation.
8.4 Multiscale Analysis of Particle Processes Despite their significance, many industrial particulate processes display unpredictable behaviour due to both their multiscale nature and the coexistence of different phases: this leads to undesirable losses in resources, energy, money and time. Considerable progress can be achieved using multiscale analysis and modelling to provide both visual and quantitative details of the dynamics of multiphase particulate systems. However, immature predictive capabilities, together with a lack of expertise and education in this developing field, hinder the adoption of these technologies. In order to address this skills gap, a new EU-ITN network, T-MAPPP, brings together 15 leading European organizations in their respective fields, including 10 industrial companies and stakeholders ranging from agriculture/food processing, consumer/personal care, chemicals/pharmaceuticals to software and equipment manufacture, to foster and develop a pool of ESRs and ERs who can transform multiscale analysis and modelling from an exciting scientific tool into a widely adopted industrial method.
8.4.1 Constitutive modeling of (adhesive) anisotropic granular solids Dense granular materials behave differently from fluids or solids. Classical continuum theories fail in describing granular matter when the onset of flowing is approached, and his properties, as dilatancy, yield limit, anisotropy and ratcheting. In fact, the behavior at macro-scale is strongly related to smaller-scale field variables and kinetic processes. The goal is to solve this lack with a multiscale approach, coupling discrete and continuum. Getting insights from Discrete Element Method (DEM) simulations a continuum in-homogeneous model will be developed and implemented to describe the macroscopic behavior of the material in terms of homogeneous local properties. A first step is the development of a local constitutive model with anisotropy The model involves only scalar quantities and a new ingredient, the anisotropy. As opposed to isotropic materials, shear strain can cause e.g. dilation and hence compressive stresses, when anisotropy is considered. The local field variables are expressed in terms of material parameters, measured by DEM simulations, leading to a complete calibration of the predictive model.
8.5 Shaping segregation: Continuum modeling of segregation in particulate systems Dense, dry granular avalanches are very efficient at sorting the larger particles towards the free surface of the flow, and finer grains towards the base, through the combined processes of kinetic sieving and squeeze expulsion. Main aim is to develop a unified continuum model of particle segregation, capable of simulating realistic particles and complex system geometries. The model will be able to handle polydisperse flows of irregularly shaped particles with evolving size-distributions. Hence, it will even be possible to predict the behaviour of systems in which the fragmentation/agglomeration of particles occurs. The focus of this research is now on using this model to explain phenomena caused by segregation. These include pattern formation in rotation drums, levee formation in geophysical flows, particle size structure of a flowing finite mass of material in avalanches and axial segregation in long rotating cylinders.
141
The proposed approach involves a powerful combination of particle simulations (S), experimental (E) techniques and continuum modelling (M), producing both theoretical and numerical solutions. The continuum numerical codes will be implemented in the open-source software package hpGEM (http://hpGEM.org), while the particle simulation codes will be implemented in MercuryDPM (http://MercuryDPM.org). These codes will be made available to both academia and industry via new public releases. In 2015 the spin off company MercuryLab (http://www.mercurylab.org) focused on training and consultancy on DEM simulations and MercuryDPM has been launched.
8.6 Discrete particle self-healing material models Using an advanced history dependent contact model for DEM simulations, including elasto-plasticity, viscosity, adhesion, and friction, pressure-sintered tablets are formed from primary particles. These tablets are subjected to unconfined uni-axial compression until and beyond failure. For fast and slow deformation we observe ductile-like and brittle softening, respectively. We propose a model for local self-healing that allows damage to heal during loading such that the material strength of the sample increases and failure/softening is delayed to larger strains. Local healing is achieved by increasing the (attractive) contact adhesion forces for those particles involved in a potentially breaking contact. By healing and sintering, the material strength is enhanced, i.e. the material fails at larger strains and reaches larger maximal stress values, when any of the parameters (a) – (c) is increased. For moderate damage detection sensitivities, the material strength increases with both increasing healing rate and increasing adhesion of the healed contacts. For very large adhesion between the healed contacts an interesting instability with strong (brittle) fluctuations of the healed material’s strength is observed.
8.6.1 Sintering – Modeling of Pressure-, Temperature-, or Time-Dependent Contacts In most realistic situations, where particles come in contact, it can NOT be assumed that the contact properties are independent of pressure, temperature or time. Therefore, this project involves pressure-, temperature-, and time-dependent contact properties and their influence on the macroscopic powder flow behavior. Sintering is chosen as one possible example and starting point, where all these phenomena are relevant. The goal of this project is to model the particles in contact, before the particles lose their identity. For this, temperature- and pressure-dependent contact models have to be developed in parallel to contact-measurements (with Kappl, Mainz). The many-particle simulations will then be adapted to the materials used and experimentally validated (with Tomas, Magdeburg). As the result of the project, a verified numerical model for the sintering process of many particles will become available. This will then be used for the micro-macro transition in order to obtain better theoretical constitutive relations for a macroscopic description based on the contact-mechanics and -physics.
8.7 Micromechanical modeling of asphalt Asphalt is an important road paving material. Besides an acceptable price, durability, surface conditions (like roughening and evenness), age-, weather- and traffic-induced failures and degradation are relevant aspects. In the professional road engineering branch empirical models are used to describe the mechanical behaviour of the material and to address large-scale problems for road distress phenomena like rutting, ravelling, cracking and roughness and phenomena like paving and compaction. The meso-scopic granular nature of asphalt and the chemistry and mechanics of the bitumen layer between the particles is only partly involved in
142
this approach. The discrete particle method is a modern tool that (first of all) allows for arbitrary (self-)organization of the asphalt meso-structure and for rearrangements due to compaction and cyclic loading. This is of utmost importance for asphalt during the construction phase and the usage period, in forecasting the relevant distress phenomena and understand their origin on the grain-, contact-, or molecular scales. The ultimate goal is to derive micro- and meso-based constitutive models that can be applied to model asphalt pavements on the larger (macro) scales. Special focuses are the heat-induced self-healing processes into the mixture and the development of Warm (low temperature) Mixture, by using proper fluidization additives.
9. Refereed scientific publications related to research school EM
9.1 Refereed journals
Berzi, D. & Vescovi, D. (2015). Different singularities in the functions of extended kinetic theory
at the origin of the yield stress in granular flow. Physics of Fluids, 27, 1-7.
Gonzalez, S., Windows-Yule, C.R., Luding, S., Parker, D. J. & Thornton, A. R. (2015). Forced axial
segregation in axially inhomogeneous rotating systems. Physical Review E, 92(2), 1-9.
Gonzalez, S. Thornton, A. R. & Luding, S. (2015). Free cooling of hard-spheres with short and long
range interactions. Europhysics Journal of Spectroscopy, 223(11), 2205-2225.
Imole, O.I., Krijgsman, D., Weinhart, T., Magnanimo, V., Chavez Montes, Bruno E., Ramaioli, M &
Luding, S. (2015). Experiments and discrete element simulation of the dosing of cohesive
powders in a simplified geometry. Powder Technology, 287, 108-120.
Imole, O.I., Paulick, M., Magnanimo, V., Morgenmeyer, M., Ramaioli, M., Chavez Montes, B.E.,
Kwade, A. & Luding, S. (2015). Slow stress relaxation behavior of cohesive powders. Powder
Technology, (ISSN 0032-5910 & 1873-328X), 1-12. 10.1016/j.powtec.2015.12.023.
Kumar, N., Magnanimo, V. & Luding, S. (2015). Tuning the bulk properties of bidisperse granular
mixtures by small amount of fines. Powder Technology, (ISSN 0032-5910 & 1873-328X).
doi:10.1016/j.powtec.2015.11.042.
Redaelli, I., Prisco, C. di & Vescovi, D. (2015). A visco-elasto-plastic model for granular materials
under simple shear conditions. Numerical and analytical methods in geomechanics (ISSN 0363-
9061 & 1096-9853), 40, 80-104. 10.1002/nag.2391.
Rivas Abud, N. A., Thornton, A. R., Luding, S. & Meer, D. van der (2015). From the granular
Leidenfrost state to buoyancy-driven convection. Physical Review E, 91(4), 042202.
Rosato, A.D., Zuo, L., Blackmore, D., Wu, H., Horntrop, D. J., Parker, D.J. & Windows-Yule, C.R.
(2015). Tapped granular column dynamics: simulations, experiments and modeling.
Computational particle mechanics, (ISSN 2196-4378 & 2196-4386). 10.1007/s40571-015-0075-2
143
Roy, S., Singh, A., Luding, S. & Weinhart, T. (2015). Micro-macro transition and simplified contact
models for wet granular Materials. Computational particle mechanics, (ISSN 2196-4378 & 2196-
4386). 10.1007/s40571-015-0061-8.
Rubio-Largo, S.M., Alonso-Marroquin, F., Weinhart, T. & Hidalgo, R.C. (2015). Homogeneous
cooling state of frictionless rod particles. PhysicaA, 443, 477-485.
Saitoh, K., Magnanimo, V. & Luding, S. (2015). A Master equation for the probability distribution
functions of overlaps between particles in two dimensional granular packings. Soft Matter 11(7),
1253-1258.
Saitoh, K. & Mizuno, H. (2015). Anomalous energy cascades in dense granular materials yielding
under simple shear deformations. Soft Matter, (ISSN 1744-683X & 1744-6848).
10.1039/C5SM02760H.
Saitoh, K., Takada, S. & Hayakawa, H. (2015). Hydrodynamic instabilities in shear flows of dry
cohesive granular particles. Soft Matter, 11(32), 6371-6385.
Singh, A., Saitoh, K., Magnanimo, V. & Luding, S. (2015). Role of gravity or confining pressure and
contact stiffness in granular rheology. New Journal of Physics, 17, 043028.
Tunuguntla, D.R., Thornton, A.R. & Weinhart, T. (2015). From discrete elements to continuum
fields: Extension to bidisperse systems. Computational particle mechanics, (ISSN 2196-4378 &
2196-4386). 10.1007/s40571-015-0087-y.
Tunuguntla, D.R., Thornton, A.R. & Weinhart, T. (2015). From discrete to continuum fields in
bidisperse granular mixtures. Computational particle mechanics, (ISSN 2196-4378 & 2196-4386),
1-17. 10.1007/s40571-015-0087-y.
Weinhart, T., Thornton, A.R. & Einav, I. (2015). Editorial: Modelling and computational
challenges in granular. Computational particle mechanics, (ISSN 2196-4378 & 2196-4386). DOI
10.1007/s40571-015-0091-2
Weinhart, T., Labra, C., Luding, S. & Ooi, Jin Y. (2015). Influence of coarse-graining parameters
on the analysis of DEM simulations of silo flow. Powder Technology, (ISSN 0032-5910 & 1873-
328X). 10.1016/j.powtec.2015.11.052
Windows-Yule, C.R., Douglas, G.J.M. & Parker, D.J. (2015). Competition between geometrically
induced and density-driven segregation mechanisms in vibrofluidized granular systems. Physical
Review E, 91(3), 1-9.
Windows-Yule, C.R. & Parker, D.J. (2015). Density-Driven segregation in Binary and Ternary
Granular Systems. KONA, 32, 163-175.
144
Windows-Yule, C.R., Rosato, A.D., Parker, D.J. & Thornton, A.R. (2015). Maximizing energy
transfer in vibrofluidized granular systems. Physical Review E, (ISSN 1539-3755 & 1550-2376),
91:052203(5). 10.1103/PhysRevE.91.052203.
Windows-Yule, C.R., Tunuguntla, D.R. & Parker, D.J. (2015). Numerical modelling of granular
flows: a reality check. Computational particle mechanics, (ISSN 2196-4378 & 2196-4386).
10.1007/s40571-015-0083-2
Windows-Yule, C.R., Rosato, A.D., Thornton, A. R. & Parker, D.J. (2015). Resonance effects on the
dynamics of dense granular beds: achieving optimal energy transfer in vibrated granular systems.
New Journal of Physics, 17, 1-14.
9.2 Books, chapters in book Books: - chapters in book: -
9.3 Refereed proceedings Roy, S., Luding, S. & Weinhart, T. (2015). Towards hydrodynamic simulations of wet particle
systems. In Proceeding WCPT7 Vol. 102, Procedia engineering, pp. 1531-1538, Elsevier.
Shi, H., Singh, A., Luding, S. & Magnanimo, V. (2015). Numerical and experimental investigation
of yielding for cohesive dry powder. In Proceedings 8th Int. Conference for Conveying and
Handling of Particulate Solids (CHOPS 2015), H. Kalman & A. Levy (Eds.), pp. 1-9.
Roy, S., Luding, S. & Weinhart, T. (2015). Macroscopic Bulk Cohesion and Torque for wet
Granular matter. In Proceedings 8th Int. Conference for Conveying and Handling of Particulate
Solids (CHOPS 2015), H. Kalman & A. Levy (Eds.).
Taghizadeh Bajgirani, K., Kumar, N., Magnanimo, V. & Luding, S. (2015). Understanding the
effects of inter-particle contact friction on the elastic moduli of granular materials. In Proceeding
of International Symposium on Geohazards and Geomechanics, pp. 1-7, IOP.
Saitoh, K., Magnanimo, V. & Luding, S. (2015). A Master equation for force distributions in
polydisperse frictional particle systems. In Proceeding of Particles 2015, E. Onate, M. Bischoff,
D.R.J. Owen, P. Wriggers & T. Zohdi (Eds.), pp. 1-12.
145
10. Overview of research input and output “Multi Scale Mechanics” related to EM, 2015 10.1 Input
Sources of financing 1) Total
1 2 3 number Fte
Senior academic staff 6 6 1.6
Supporting staff 2)
PhD 3) 3 2 5 4
Postdocs 8 8 2.1
Total 6 11 2 19 7.7 1) Sources of financing: 1: University 2: STW, NWO, FOM 3: Industry, TNO, EC-funds, Nuffic, Senter, M2i, DPI etc. 2) No research input involved for supporting staff. 3) Research input for PhD per year: 0.8 fte
10.2 Output
Total
Scientific publications: refereed journals 24
Scientific publications: books, chapters in book -
Scientific publications: refereed proceedings 5
PhD theses - * In cooperation with other EM-groups.
11. Keynote lectures and seminars
19/02/2015, Luding, S. Discrete Element Method” Vom Teilchen zum Kontinuum – Forschung
& Anwendung. Hilchenbach, germany, Plenarvortrag, Verein Deutscher Eisenhüttenleute (VDEh),
SMS Siemag AG.
18/08/2015, Luding, S. Elemente Methode –Teilchen vs. Kontinuum - Forschung & Anwendung.
Ulm, Germany, Univ. Ulm.
17/12/2015, Luding, S. From Particle Simulations to Multi-Scale (Models) and Continuum Theory
(Applications). Nothingham, England, 12th UK Travelling Workshop: Geo-mechanics: From micro
to macro (GM3).
16/12/2015, Luding, S. Multi-Scale Models for particles in fluids –. Chatham, UK, The Wolfson
Centre for Bulk Solids Handling Technology.
22/09/2015 Luding, S. Multi-Scale Models for particles in fluids – micro- and meso-scale
particle-fluid models. Hamburg-Harburg, Germany, Workshop Morphodynamics, TUHH.
30/11/2015, Luding, S. Rheology of soft and cohesive granular materials. Santiago, Chile,
Southern Granular Workshop.
146
11/09/2015 Luding, S. Understanding the effects of inter-particle contact friction on the elastic
moduli of granular materials. Warwick, UK, International Symposium on Geohazards and
Geomechanics.
26/01/2015, Luding, S. Computational science from particle based models to applications.
Münster, Germany, UT-Muenster Computational Science Seminar.
18/03/2015, Luding, S. Influence of coarse graining parameters on the analysis of DEM results.
Magdeburg, Germany, GVC/DECHEMA Fachausschuss Sitzung.
24/02/2015, Luding, S. Macroscopic model with evolution of structural anisotropy based on
micro-macro, particle-to-continuum methods. Eindhoven, NL, TU/e Euromech Coll. 559.
19/03/2015, Luding, S. Multiscale Mechanics Modeling for Tire and Road/Asphalt. Aachen,
Germany, TireRoadConsortium (TRC), RWTH Aachen.
15/03/2015 Thornton, A. R. Multiscale modelling of granular avalanches. Salt Lake City, USA,
Mini Symposium on Large scale computing in the geosciences at the SIAM Conference on
Computation Science and Engineering 2015.
28/09/2015 Thornton, A. R. Discrete to continuum fields in bidisperse granular mixtures.
Barcelona, Spain, Mini symposium From Discrete to Continuum Models of Granular Mechanics
at Particles 2015.
30/11/2015 Thornton, A. R. Size and density segregation in bidisperse mixtures. Santiago, Chile,
Southern Granular Workshop.
10/11/2015 Thornton, A. R. Multi-scale modelling of segregating granular flows: From inclined
planes to drums, via a volcano. Invited speaker at EPFL, Department of Civil Engineering,
Louseanne, Switzerland
25/06/2015 Magnanimo, V. Elasticity and waves in granular materials. Koln, Germany. Invited
seminar at DLR.
08/07/2015 Magnanimo, V. The relation between elastic stiffness and microstructure in granular
materials. Madrid, Spain. Granular Material Mini Symposium at ESMC 2015.
28/09/2015 Magnanimo, V. The shear stiffness of granular packings: a micromechanical view.
Barcelona, Spain, Mini symposium From Discrete to Continuum Models of Granular Materials at
Particles 2015.
12. Memberships
12.1 Editorial boards international journals Luding, S.: Managing Editor in Chief. Granul. Matter, (ISSN 1434-5021), since 1998.
Luding, S.: Advisory Board. Particuology, (ISSN 1674-2001) since 2010.
147
Luding, S.: Editor: Journal of Computational Particle Mechanics (ISSN 2196-4378) since 2013
Luding, S.: Editor: AGEM^2, Springer Book Series (ISSN: 1866-8348) since 2013
Luding, S.: Guest Editor: PARDEM Special Issue, Powder Technology, Elsevier (2015)
Magnanimo, V.: Editorial Advisory Board. Geotechnique, (E-ISSN : 1751-7656): 2013-2016
Magnanimo, V.: Guest Editor: PARDEM Special Issue, Powder Technology, Elsevier (2015).
12.2 International scientific committees
from 2005, Luding S. President Board, President (elected 2005, re-elected 2009). AEMMG – Association pour L’Etude de la Micromecanique des Milieux Granulaires.
from 2002, Luding S. Member Board, DECHEMA (former VDI-GVC) Fachausschuss Agglomerations und Schuettguttechnik.
from 2005, Luding S. Member Board, Dutch Representative: EFCE Working Party on Mechanics of Particulate Solids.
from 2006, Luding S. Member Board, IFMCGM – Intnl. Federation of Measurement and Control of Granular Media.
2015, Luding, S., Magnanino, V., Thornton A.R., Weinhart T., Member of scientific committee of ‘Particles 2015’. Barcelona, Spain, September 2015.
2015, Luding, S., Magnanimo, V., Main organisers and co-chairs of the session on From Discrete to Continuum Models of Granular Materials at Particles 2015, Barcelona, Spain, September 2015.
2015, Thornton A.R., Weinhart T., Main organisers and co-chairs of the session on Segregating in granular systems at Particles 2015, Barcelona, Spain, September 2015.
12.3 National Science Foundation and Academies S. Luding: board-member 3TU Research Centre Fluid and Solid Mechanics (since Oct. 2013);
S. Luding: board-member of the Netherlands Mechanics Committee (NMC) (since Dec. 2013);
S. Luding: board-member of the NWO Graduate Programme Fluid and Solid Mechanics (since 2012);
Den Otter, W.: Secretary NWO/CW (Chemische Wetenschappen) studiegroep "lipids and membranes".
13. Awards, patents and NWO grants 2015: STW Take-Off Phase 1 Grant: The MercuryLab Project. 14. International collaborations:
T-MAPPP: Training on Multiscale Applications of multiphase Particle Processes. EU Funded
Framework 7, Marie Curie Initial Training Network. France, 2013-2017.
Hydrodynamic theory of wet particle systems: Modeling, simulation and validation based on
microscopic and macroscopic description. STW-DFG joint project Nr. 12272. With University of
Dortmund and TU Bergakademie Freiberg, Germany.
148
Partikel im Kontakt - Mikromechanik, Mikroprozessdynamik und Partikelkollektive – Thema: Sintering – Modeling of Pressure-, Temperature-, or Time Dependent Contacts. Schwerpunktprogramm 148 in Germany.
149
Joint Research Activities
Appendix A: Joint Research Activities
Title
Start
Participants
Local Alloying and Cladding of Advanced Al-Alloys Employing Friction Stir Welding
2009-
ApMe (UT), Prof. dr. ir. Huetink, Dr. ir. H.L.M. Geijselaars, Ir. A. van der Stelt.
ProTE (UT) prof. dr. ir. Akkerman, Dr. T. Bor, Dr. D. Christoulis
Title
Start
Participants
Intelligent Rotor Blades
2009-
ApMe (UT) Prof. dr. ir. A. de Boer, Dr. R. Loendersloot, A.R.A. Paternoster
ProTe (UT) Prof. dr. ir. R. Akkerman
Title
Start
Participants
Ultrasonic Inspection of Thermoplastics
2009-
ApMe (UT) Prof. dr.ir. A. de Boer, Dr. ir. R. Loendersloot
ProTe (UT) Prof. dr.ir. R. Akkerman, dr. A. Demcemko
Title
Start
Participants
Acoustics Shielding
2010-
Dyco (TU/e) Prof. dr. H. Nijmeijer, Prof. dr.ir. N.B. Roozen, Prof. dr.ir. I. Lopez
MMM (TU/e) Prof.dr.ir. M.G.D. Geers, dr.ir. J.A.W. van Dommelen, Ir. K. Gao.
Title
Start
Participants
Correlating fluctuations across the scales (NWO)
2011-2016
MMM(TU/e) Prof. dr. ir. M. G.D. Geers, Ir. M. Kooiman, Dr. ir. R.H.J. Peerlings, Dr. sc.nat.
M.Hutter
CASA(TU/e) Prof. dr. M.A. Peletier, Dr. A. Muntean, P.J.P. van Meurs MSC
Title
Start
Participants
Dynamics Based Structural Health Monitoring
2010-
ApMe (UT) Prof. dr. ir. A. de Boer, Dr.ir. Loendersloot, Ir. A. Sanchez
Ramirez
ProTe (UT) Prof. dr. ir. R. Akkerman, Dr. L. Warnet
Title
Start
Participants
In and out of plane strength of hybrid joints between metals and thermoplastic composites
2012-2016
ProTe (UT) Prof. dr.ir. R. Akkerman
Trib (UT) Prof. dr.ir. D.J. Schipper, Dr. ir. M.B. de Rooij, Y. Su
Title
Start
Participants
Stil Veilig Wegverkeer
2012-2016
Apme(UT) Prof. Dr ir. A. de Boer, Dr. ir. Y. Wijnant, Ir. M. Bezemer-Krijnen
Trib(UT) Prof. dr. ir. D.J. Schipper, M. Mokthari MSc
Title
Start
Participants
Tire – Road Consortium
2011-
MSM (UT) Prof. dr. Rer. nat. S. Luding, Dr. V. Magnanimo
ApMe (UT) Prof. dr. ir. A. de Boer, Dr. ir. T.C. Bor, V.T. Meinders
Trib (UT) Prof. dr. D.J. Schipper.
Title
Start
Participants
Experimental and computational techniques for the design of impactresistant materials
2010 – 2015
CosT (TUD) Prof.dr.ir. L.J. Sluys
PME (TUD) Prof. D.J. Rixen
Title
Start
Participants
Dynamics multiscale performance of multiphase steels
2009 –
ASCM (TUD) dr. S. R. Turteltaub
AMD (TUe) prof.dr.ir. A.S.J. Suiker
A.1
Title
Start
Participants
Flow in porous media using phase field modeling and the finite cell method
2013 –
ASCM (TUD) M. Ruess
MEFD (TUe) prof. dr. ir. E.H. van Brummelen, dr. ir. C. Verhoosel
Title
Start
Participants
Maintenance Consortium
2012-
ApMe (UT) Prof.dr.ir. T. Tinga, dr.ir. R. Loendersloot
Trib (UT) Prof.dr.ir.D. Schipper, Prof. dr ir. P.M. Lugt, dr.ir. R. Bosman
ME (UT) Prof.dr.ir. L.A.M. van Dongen, dr. J. Braaksma
CME (UT) Dr. A. Hartmann, dr. I. Stipanovic
IEBIS (UT-BMS) Prof.dr. H. Zijm, dr. M. v.d Heijden
PS (UT-EWI) Prof.dr.ir. P.J.M. Havinga, dr. N. Meratnia
Title
Start
Participants
Truck merging support – a step forwards autonomous driving
2013
Dyco (TU/e) Prof.dr. H. Nijmeijer, Dr.ir I.J.M. Besselink
PME (TUD) Prof. Holweg, Dr. R. Happee
Title
Start
Participants
Other participants
Extreme materials for energy applications
2014 –
MMM (TU/e) Prof.dr.ir. M.G.D. Geers, dr.ir. J.A.W. van Dommelen,
A. Mannheim
STNF (TU/e) Prof.dr. N.J. Lopes Cardozo
PMP (TU/e) prof.dr.ir. W.M.M. (Erwin) Kessels, dr. M. Creatore Differ, Dr. T. Morgan
Title
Start
Participants
Other participants
Thermoplastic Affordable Primary Aircraft Structure (TAPAS 2)
2014- 2018
ApMe (UT) Prof. dr. ir. A. de Boer, Dr. ir. H.L.M. Geijselaars
ProTe (UT) Prof. dr. ir. R. Akkerman
Title
Start
Participants
Ultrasonic inspection of water mains (Wetsus)
2014-
ApMe (UT) Dr. ir. R. Loendersloot, Prof. dr. ir. T. Tinga
ProTe (UT) Prof. dr. ir. R. Akkerman, Dr. L. Warnet,
Title
Start
Participants
Other Particpants
Maintenance and Service Logistics for Maritime Assets (Maselma)
2014-
ApMe (UT) Prof. dr. ir. T. Tinga, Dr. ir. R. Loendersloot
IEBIS (UT) Prof. dr. H. Zijm, Dr. M. v/d Heijden.
TUE, NLDA, Navy, Damen, Thales, Imtech, …
Title
Start
Participants
Other Particpants
Additive Manufacturing in Maintenance (NWO SINTAS)
2014-
ApMe (UT) Prof. dr. ir. T. Tinga, Dr. ir. R. Loendersloot
IEBIS (UT) Dr. M. v/d Heijden.
TUE, MinDef, NLR, Thales, Fokker, Additive Industries
Title
Start
Participants
Other Participants
Optimizing Railway Maintenance
2015-
ApMe (UT) Prof. dr. ir. T. Tinga, Dr. ir. R. Loendersloot
Trib (UT) Prof.dr.ir. P. Lugt, Dr.ir. R. Bosman
ME(UT) Prof.dr.ir. L.A.M. van Dongen, dr. J. Braaksma
PS (UT-EWI) Prof.dr.ir. P.J.M. Havinga, dr. N. Meratnia
Strukton
Title
Start
Participants
SHM of Bridges (H2020 Destination Rail + NWO KIEM)
2015-
ApMe (UT) Prof. dr. ir. T. Tinga, Dr. ir. R. Loendersloot
A.2
Other Participants CME (UT) Dr. A. Hartmann, dr. I. Stipanovic
PS (UT-EWI) Prof.dr.ir. P.J.M. Havinga, dr. N. Meratnia
H2020 consortium, Heijmans
Title
Start
Participants
Other participants
Topology optimization for additive manufacturing with process constraints (STW)
2015 -
PME (TUD) Prof.dr.ir. A. van Keulen, Dr. ir. C. Ayas
MS3 (UT) Prof.dr. ir. A.H. van den Boogaard, Dr. Ir. H.J.M. Geijselaers
Title
Start
Participants
Other participants
Fundamental Fluid Dynamics Challenges in Inkjet Printing (FIP)
2015 –
MEFD (TU/e) Prof.dr.ir. E.H. van Brummelen
MMM(TU/e) Prof.dr.ir. M.G.D. Geers, Dr.ir. R.H.J. Peerlings, Dr. ir. J.P.M. Hoefnagels
MSM (UT) Prof. Dr. Rer. nat. S. Luding
A.3
Overview of Input 2011-2015
B.1
Appendix B: Overview of Input 2011-2015
B.1 Senior Academic Staff
2011 2012 2013 2014 2015
total 2011-2015
Annual Average
Group # fte # fte # fte # fte # fte # fte # fte
TU/e-DyCo 9 1,6 7 1,5 8 1,5 7 1,6 10 2,3 41 8,5 8 1,4
TU/e-MSFM 12 3,8 15 5 14 4,6 13 4,2 - - 54 17,6 14 3,8
TU/e-MMM - - - - - - - - 10 3,3 10 3,3 10 3,6
TU/e-MANT 5 2,1 - - - - - - - - 5 2,1 5 2,1
TU/e-MEFD - - - - - - - - 2 0,7 2 0,7 2 0,7
TU/e-CASA 8 1,4 9 1,4 3 0,6 3 0,6 3 0,6 26 4,6 7 0,9
TU/e-AMD - - 2 0,3 2 0,3 2 0,3 3 0,3 9 1,2 2 0,3
TU/e-SyEn 5 1,5 4 1,4 4 1,4 4 1,4 - - 17 4,2 4 1,4
TUD-ASCM 8 1,7 7 1,3 8 1,7 7 1,8 7 2 37 8,5 7 1,7
TUD-ApMe 13 5,4 10 4,5 7 2,6 9 2,4 9 2,6 48 17,5 10 3,5
TUD-Cost 5 1,5 5 1,5 7 2,1 7 2,1 7 2,3 31 9,5 6 1,9
UT-ApMe 10 1,9 12 2,42 11 2,75 11 2,7 11 2,7 55 12,5 11 2,5
UT-Trib 6 1,3 7 1,56 7 1,46 7 1,29 7 1,3 34 6,9 7 1,4
UT-MeAu 3 0,5 2 0,4 - - - - - - 5 0,9 3 0,5
UT-ProTe 5 1,6 5 1,6 5 1,5 5 1,3 5 1,5 25 7,5 5 1,5
UT-MSM 4 1,2 6 1,64 6 1,64 6 1,24 6 1,64 28 7,4 6 1,5
EM total 93,0 25,5 91 24,52 82 22,15 81 20,9 80 21,2 854 114,3 85 22,9
0
5
10
15
20
25
30
2011 2012 2013 2014 2015
senior academic staff (fte)
fte average
B.2
Appendix B: Overview of Input 2011-2015
B.2 PhD-Students (fte)
Group 2011 2012 2013 2014 2015 total 2011-
2015 annual
average
TU/e-DyCo 9,6 10,4 14 7,2 8,8 50,0 10,0
TU/e-MSFM 16 18,4 27,2 30,4 - 92,0 23,0
TU/e- MMM - - - - 16 16,0 16,0
TU/e-MANT 4 - - - - 4,0 4,0
TU/e-MEFD - - - - 3,2 3,2 3,2
TU/e-CASA 4,8 4 3,2 3,2 2,4 17,6 3,5
TU/e-AMD - 0 0,8 2,4 3,2 5,6 1,6
TU/e-SyEn 2,4 0,8 1,6 0 - 4,8 1,2
TUD-ASCM 16 14,4 13,6 14,4 12,8 71,2 14,2
TUD-ApMe 23,2 17,6 18,4 17,6 16,8 93,6 18,7
TUD-Cost 11,6 12,6 16,8 24 24 89,0 17,8
UT-ApMe 15,2 12 12,8 11,2 20 71,2 14,2
UT-Trib 16 16 20,8 17,6 22,4 92,8 18,6
UT-MeAu 0,8 0,8 - - - 1,6 0,8
UT-ProTe 5,5 12,8 12,8 5,6 7,2 43,9 8,8
UT-MSM 4,8 3,2 4 9,68 4 25,7 5,1
EM total 129,9 123 146 143,3 140,8 683,0 136,6
0
20
40
60
80
100
120
140
160
2011 2012 2013 2014 2015
PhD-Students (fte)
fte average
B.3
Appendix B: Overview of Input 2011-2015
B.3 Postdocs (fte)
Group 2011 2012 2013 2014 2015 total 2010-
2014 annual
average
TU/e-DyCo 0,8 0,4 2 2 4 9,2 1,8
TU/e-MSFM 3 2,4 5,6 4,8 - 15,8 4,0
Tu/e-MMM - - - - 3,2 3,2 3,2
TU/e-MANT 2 - - - - 2,0 2,0
TU/e-MEFD - - - - 0,0 0,0 0,0
TU/e-CASA 0,5 0 0 0 0 0,5 0,1
TU/e-AMD - 0 0 0 0 0,0 0,0
TU/e-SyEn 0,8 1 1 1 - 3,8 1,0
TUD-ASCM 0,3 0 2,8 2,4 0,9 6,4 1,3
TUD-ApMe 4 0 1 2,4 3,2 10,6 2,1
TUD-Cost 0,4 0,4 0 1,1 1,2 3,1 0,6
UT-ApMe 3,2 3,2 2,8 2,4 1,6 13,2 2,6
UT-Trib 0,8 2 1,5 0,8 0,8 5,9 1,2
UT-MeAu 0,3 0 - - - 0,3 0,2
UT-ProTe 4 4 2,8 2 0,5 13,3 2,7
UT-MSM 2,7 0,4 0,4 2,04 2,1 7,7 1,5
EM total 22,8 13,8 19,9 20,9 17,5 95,0 19,0
0
5
10
15
20
25
2011 2012 2013 2014 2015
Postdocs (fte)
fte average
B.4
Appendix B: Overview of Input 2011-2015
B.4 Total Input in fte (Staff+PhD+Postdoc)
Group 2011 2012 2013 2014 2015 total 2011-
2015 annual
average
TU/e-DyCo 12 12,3 13,9 10,8 15,1 64,1 12,8
TU/e-MSFM 22,8 25,8 37,4 39,4 - 125,4 31,4
TU/e_MMM - - - - 22,1 22,1 22,1
TU/e-MANT 8,1 - - - - 8,1 8,1
TU/e-EnTe - - - - 3,9 3,9 3,9
TU/e-CASA 6,7 5,4 3,8 3,8 3 22,7 4,5
TU/e-AMD - 0,3 1,1 2,7 3,5 7,6 1,9
TU/e-SyEn 4,7 3,2 4 2,4 - 14,3 3,6
TUD--ASCM 18 0 18,1 18,6 15,7 70,4 14,1
TUD-ApMe 32,6 22,1 22 22,4 22,6 121,7 24,3
TUD-Cost 13,5 14,5 18,9 27,2 27,5 101,6 20,3
UT-ApMe 20,3 19,6 18,4 16,3 24,3 98,9 21,1
UT-Trib 18,1 19,6 23,8 19,7 24,5 105,6 21,1
UT-MeAu 1,6 1,2 - - - 2,8 1,4
UT-ProTe 11,1 18,4 18,4 8,9 9,2 66,0 13,2
UT-MSM 8,7 5,4 6,04 12,90 7,76 40,8 8,2
EM total 178,2 147,8 185,8 185,1 179,2 876,0 175,2
0
20
40
60
80
100
120
140
160
180
200
2011 2012 2013 2014 2015
Total input (fte) Staff + PhD+ Postdoc
fte average
Overview of Output
2011-2015
C.1
Appendix C: Overview of Output 2011-2015
C.1 Scientific publications: Refereed Journals
Group 2011 2012 2013 2014 2015 total
2011-2015 annual
average
TU/e-DyCo 9 11 11 12 8 51 9
TU/e-SyEn 13 14 15 10 - 52 13
TU/e-MSFM 35 38(2) 52(1) 53(1) - 230(4) 44,5
TU/e-MMM - - - - 53(2) 52(2) 52
TU/e-MANT 7(2) - - - - 7 (2) 7
TU/e- MEFD - - - - 8(2) 8(2) 8
TU/e-AMD - 6(3) 4 1(1) 4(1) 15(5) 3,7
TU/e-CASA 21 29(1) 17(1) 22(1) 10 99(3) 20
TUD-ASCM 18 9(2) 15 17(1) 20(1) 79(4) 15,8
TUD-ApMe 14(1) 21(1) 8 25 22 90(2) 18
TUD-Cost 14(1) 28(1) 23 12 25 102(2) 20,4
UT-ApMe 20(2) 19(5) 18(1) 12(1) 20(4) 89(13) 17,8
UT-Trib 11(1) 16(4) 22 19(1) 18(1) 86(7) 17,2
UT-MeAu 2(1) 1 - - - 3(1) 1,5
UT-ProTe 2 12(3) 11(1) 15 14(3) 54(7) 10,6
UT-MSM 19 17 21 22 24 103 20,6
EM total 185(6) 221(22) 217(4) 220 (6) 226(14) 1069(54) 213,6
*) In co-operation with other EM groups (to prevent double-counting net impact should be counted as 50%)
0
50
100
150
200
250
2011 2012 2013 2014 2015
Refereed Journals
total
average
C.2
Appendix C: Overview of Output 2011-2015
C.2 Scientific publications: Books, chapters in books
Group
2011
2012
2013
2014
2015
total 2011-2015
annual average
TU/e-DyCo 0 4 1 1 1 7 1,4
TU/e-SyEn 4 4 0 3 - 11 2,75
TU/e-MSFM 1 3(1) 7(5) 3(1) - 14(7) 3
TU/e-MMM - - - - 1 1 1
TU/e-MANT 1 - - - - 1 1
TU/e-MEFD - - - - 0 0 0
TU/e-AMD - 0 0 0 0 0 0
TU/e-CASA 3 1 2 2 1 9 1,8
TUD-ASCM 2 1 1 1 5 10 2
TUD-ApMe 1 1 1 4 1 8 1,6
TUD-Cost 1 1 1 4 0 7 1,4
UT-ApMe 0 2 3 3 2 10 2
UT-Trib 4 0 2 1 2 9 1,8
UT-MeAu 1 1 - - - 2 1
UT-ProTe 1 2 0 0 2 5 1
UT-MSM 0 0 1 0 0 1 0,2
EM total 19 20(1) 19(5) 22(1) 15 95(7) 19
*) In co-operation with other EM groups (to prevent double-counting net impact should be counted as 50%)
0
5
10
15
20
25
2011 2012 2013 2014 2015
Books and Chapters in Books
total
average
C.3
Appendix C: Overview of Output 2011-2015
C.3 Scientific publications: Refereed Proceedings
Group
2011
2012
2013
2014
2015
total 2011-2015
annual average
TU/e-DyCo 11 10 15 15 15 66 13,2
TU/e-SyEn 12 4 11 2 - 29 7,25
TU/e-MSFM 19 18(2) 21(1) 11(2) - 69(5) 17,25
TU/e-MANT 0 - - - - 0 0
TU/e-MMM - - - - 6 6 15
TU/e-MEFD - - - - 0 0 0
TU/e-AMD - 3 4 3 2 12 3
TU/e-CASA 6 29 3 4 1 43 8,6
TUD-ASCM 16 9 22 17 25 89 17,8
TUD-ApMe 25 17 21 33 25 121 24,2
TUD-Cost 28 17 17 28 19 109 21,8
UT-ApMe 30(6) 19 19 29 15 112 (6) 22,4
UT-Trib 16 4 13 2 11 46 9,2
UT-MeAu 6 9 - - - 15 7,5
UT-ProTe 19 12 7 11 5 54 11
UT- MSM 5 7 18 4 5 39 7,8
EM total 193(6) 158(2) 171(1) 159(2) 129 810(11) 168,75
*) In co-operation with other EM groups (to prevent double-counting net impact schould be counted as 50%)
0
50
100
150
200
250
2011 2012 2013 2014 2015
Refereed Proceedings
total
average
C.4
Appendix C: Overview of Output 2011-2015
C.4 Scientific publications: PhD Theses Completed
Group
2011
2012
2013
2014
2015
total 2011-2015
annual average
TU/e-DyCo 1 1 3 3 1 9 1,8
TU/e-SyEn 1 1 0 1 - 3 0,8
TU/e-MSFM 7 4 4 4 - 19 4,75
TU/e-MMM - - - - 7 7 5,2
TU/e-MANT 0 - - - - 0 0
TU/e-MEFD - - - - 0 0 0
TU/e-AMD - 0 0 0 0 0 0
TU/e-CASA 4 1 1 1 1 8 1,6
TUD-ASCM 5 3 5 3 3 19 3,8
TUD-ApMe 5 9 3 1 3 21 4,2
TUD-Cost 1 3 2 1 4 11 2,2
UT-ApMe 3 1 6 5 1 16 3,2
UT-Trib 3 3 5 3 4 18 3,6
UT-MeAu 0 0 - - - 0 0
UT-ProTe 0 1 3 4 1 9 1,8
UT-MSM 0 2 0 2 0 4 0,8
EM total 30 29 32 28 25 144 28,80
0
5
10
15
20
25
30
35
2011 2012 2013 2014 2015
PhD Theses
total
average
Addresses
General Information http://www.em.tue.nl/organization/
Scientific Director
Prof.dr.ir. M.G.D. Geers Eindhoven University of Technology Department of Mechanical Engineering P.O.Box 513, Building GEM-Z 4.135 5600 MB Eindhoven NL Phone: +31-(0)40-247 50 76 Fax: +31-(0) 40-244 7355 E-mail: [email protected]
Chairman Governing Board
Prof.dr.ir. L.J. Sluys Delft University of Technology Department of Civil Engineering and Geosciences Stevinweg 1 2628 CN Delft Phone: 015-2782728
Email: [email protected]
General Manager
Dr.ir. J.A.W. van Dommelen Eindhoven University of Technology Department of Mechanical Engineering P.O.Box 513, Building GEM-Z 4.125 5600 MB Eindhoven NL Phone: +31-(0)40-247 45 21 Fax: +31-(0) 40-244 7355 E-mail: [email protected]
Supporting Staff
R.A.M.F. van Outvorst Eindhoven University of Technology Department of Mechanical Engineering P.O.Box 513, Building GEM-Z 4.133 5600 MB Eindhoven NL Phone: +31-(0)40-247 8306 Fax: +31-(0) 40-244 7355 E-mail: [email protected]
Board of Directors http://www.em.tue.nl/organization/index.php/3
E-mail Phone
Geers, Prof.dr.ir. M.G.D. (TU/e) (Scientific Director)
[email protected] 040-2475076
Boogaard, prof.dr.ir. A.H. (UT) [email protected] 053-4894785
Sluys, Prof. dr.ir. L.J. (TUD) [email protected] 015-2782728
Governing Board http://www.em.tue.nl/organization/index.php/4
E-mail Phone
Sluys, prof.dr.ir. L.J. (TUD), (Chairman) [email protected] 015-2782728
Brummelen, prof. dr.ir. E.H. van (TU/e) [email protected] 040-2475470
Keulen, prof.dr.ir. F. van (TUD) [email protected] 015-2786515
Boogaard, prof.dr.ir. A.H. (UT) [email protected] 053-4894785
Luding, Prof.dr.rer-nat. J. (UT) [email protected] 053- 4894212
D.1
Advisory Board http://www.em.tue.nl/organization/index.php/5
E-mail Phone
Berg, dr.ir P. van den Geotechnics, Delft
[email protected] 015-2693681
Blom, dr.ir. F.J. NRG, Petten
[email protected] 0224-568186
Wingerde, drs. M.M. van M2i
[email protected] 015-2782535
Hoeve, ir. H.J. ten NLR Marknesse
[email protected] 088-5114672
Klever, Dr. Ir. F.J. Shell Int. Exploration and Production, Rijswijk
[email protected] 070-4473243
Lugt, Dr.ir J. van der Tata Steel
[email protected] 0251-493383
Wijshoff, dr.ir. H.M.A. Océ Technologies B.V.
[email protected] 040-247 3517
Vos, ir. H.C.L. TNO
[email protected] 088- 866 64 79
Board of AIOs http://www.em.tue.nl/organization/index.php/6
E-mail Phone
Kleinendorst, ir. S.M. TU/e
[email protected] 040 -2475169
Oomen, ir . M. UT
[email protected] 053 489 2463
Dedden, ir. R.J. TUD
[email protected] 015-2783204
D.2
Dynamics and Control
http://www.em.tue.nl/research/index.php/15
General information
University
Eindhoven University of Technology
Department
Mechanical Engineering
Local research institute
Research Profile Mechanics & Control
WWW
https://www.tue.nl/en/university/departments/mechanical-engineering/research/research-groups/dynamics-and-control/
Group directors
Prof.dr. H. Nijmeijer
Secretariat
Geertje Janssen-Dols Eindhoven University of Technology P.O.Box 513, Building GEM-Z 0.143 5600 MB Eindhoven NL Phone: +31-(0)40-247 48 17/2796 E-mail: [email protected]
D.3
Multiscale Engineering Fluid mechanics
http://www.em.tue.nl/organization/index.php/10/3
General information
University
Eindhoven University of Technology
Department
Mechanical Engineering
Local research institute
Research Profile Multiscale Engineering Fluid Dynamics
WWW
http://w3.wtb.tue.nl/en/research/research_groups/multiscale_engineering_fluid_dynamics/
Group directors
Prof.dr.ir. E.H. van Brummelen
Secretariat Marianne Meves Eindhoven University of Technology P.O.Box 513, Building GEM-Z 2.131 5600 MB Eindhoven NL Phone: +31-(0)40-247 3517 E-mail: [email protected]
D.4
Mechanics of Materials and
Microsystems http://www.em.tue.nl/research/index.php/18
General information
University
Eindhoven University of Technology
Department
Mechanical Engineering
Local research institute
Research Profile Multiscale Engineering Fluid
Dynamics
WWW http://www.mate.tue.nl/mate/research http://www.tue.nl/mechmat http://www.tue.nl/microsystems/ http://w3.wtb.tue.nl/en/research/research_groups/multiscale_engineering_fluid_dynamics/
Group directors
Prof.dr.ir. M.G.D. Geers
Secretariat Alice van Litsenburg Eindhoven University of Technology P.O.Box 513, Building GEM-Z 4.133 5600 MB Eindhoven NL Phone: +31-(0)40-247 40 60 E-mail: [email protected]
Prof.dr.ir. J.M.J. den Toonder Liesbeth van Ballegooij
Eindhoven University of Technology P.O.Box 513, Building GEM-Z 3.132 5600 MB Eindhoven NL Phone: +31-(0)40-247 5706 E-mail: [email protected]
D.5
Applied Mechanics and Design
http://www.em.tue.nl/organization/index.php/10/23
General information
University
Eindhoven University of Technology
Department
Built Environment
Local research institute
Unit of Structural Design
WWW
Webpage under construction
Group director
Prof.dr.ir. A.S.J. Suiker
Secretariat
Ms. Nathaly Rombley Eindhoven University of Technology P.O.Box 513, Building Vertigo, room 9.08 5600 MB Eindhoven NL Phone: +31-(0)40-247 3992 E-mail: [email protected]
D.6
Analysis Scientific Computing and
Applications (Casa) http://www.em.tue.nl/research/index.php/13
General information
University
Eindhoven University of Technology
Department
Mathematics and Computing Science
Local research institute
Research Profile Mechanics & Control
WWW
http://www.win.tue.nl/casa/
Group director Prof.dr. B. Koren Prof. dr. M.A. Peletier
Secretariat
Marèse Wolfs, Enna van Dijk Eindhoven University of Technology P.O. Box 513, Building MF 7.120 5600 MB Eindhoven NL Phone: +31-(0)40-247 4760 /2753 E-mail: [email protected] [email protected]
D.7
Aerospaces structures and Computational
Mechanics (ASCM)
http://www.em.tue.nl/research/index.php/16
General information
University
Delft University of Technology
Department
Aerospace Engineering
Local research institute
Koiter Institute Delft
WWW
http://www.lr.tudelft.nl/aes
Group director
Prof. Dr. C. Bisagni Secretariat
Laura Chant Delft University of Technology P.O. Box 5058, Building Kluyverweg 1 2600 GB Delft NL Phone: +31 (0)15-27 85381 Fax: +31 (0)15-27 85337 E-mail: [email protected]
D.8
Applied Mechanics (PME) http://www.em.tue.nl/research/index.php/21
General information
University
Delft University of Technology
Department
Mechanical, Maritime and Materials Engineering
Local research institute
Koiter Institute Delft
WWW
http://www.pme.tudelft.nl
Group director
Prof.dr.ir. F. van Keulen
Secretariat
Marianne Stolker Delft University of Technology Mekelweg 2, 2628 CD Delft NL Phone: +31-(0)15-27 86513 E-mail: [email protected]
D.9
Computational Mechanics,
Structural Mechanics and Dynamics http://www.em.tue.nl/research/index.php/14
General information
University
Delft University of Technology
Department
Faculty of Civil Engineering and Geosciences
Local research institute
Koiter Institute
WWW
http://www.citg.tudelft.nl/en/about-faculty/departments/structural-engineering/sections/structural-mechanics/
Group director
Prof.dr.ir. L.J. Sluys
Secretariat
Anneke Meijer Delft University of Technology Stevinweg 1, 2628 CN, Delft NL Phone: +31-(0)15-27 83332 Fax: +31-(0)15-27 88275 E-mail: [email protected]
D.10
Applied Mechanics http://www.em.tue.nl/research/index.php/12
General information
University
University of Twente
Department
Engineering Technology
Local research institute
Science Based Engineering
WWW
http://www.tm.ctw.utwente.nl/
Group directors
Prof.dr.ir. A. de Boer Prof.dr.ir. A.H. van den Boogaard Prof. dr. Ir. T. Tinga
Secretariat
Debbie Vrieze-Zimmerman van Woesik University of Twente P.O. Box 217 7500 AE Enschede NL Phone: +31-(0)53-489 24 60 Fax: +31-(0)53-489 34 71 E-mail: [email protected]
D.11
Surface Technology and Tribology http://www.em.tue.nl/research/index.php/23
General information
University
University of Twente
Department
Mechanics of Solid, Surfaces and Sytems
Local research institute Science Based Engineering
WWW
http://www.tr.ctw.utwente.nl/
Group director
Prof.dr.ir. D.J. Schipper Secretariat
Belinda Bruinink University of Twente Building Horst, HR-N106 P.O.Box 217 7500 AE Enschede NL Phone: +31-(0)53-489 56 30 E-mail: [email protected]
D.12
Production Technology http://www.em.tue.nl/research/index.php/20
General information
University
University of Twente
Department
Engineering Technology
Local research institute Science Based Engineering
WWW
http://www.pt.ctw.utwente.nl/
Group director
Prof.dr.ir. R. Akkerman
Secretariat
Belinda Bruinink University of Twente P.O. Box 217 7500 AE Enschede NL Phone: +31-(0)53-489 56 30 Fax: +31-(0)53-489 47 84 E-mail: [email protected]
D.13
Multi Scale Mechanics http://www.em.tue.nl/research/index.php/20
General information
University
University of Twente
Department
Engineering Technology
Local research institute
Institute for Nanotechnology, MESA+
WWW
http://www.msm.ctw.utwente.nl
Group director
Prof.dr. S. Luding
Secretariat
Sylvia Hodes-Laarhuis University of Twente, NL Faculty CTW, Multi Scale Mechanics building: Horst 20 Phone: +31 53 4893371 E-mail: [email protected]
D.14