engineering presentation

25
Dubai Drydocks World Engineering Capabilities By: Willem Vijfhuizen / 05.07.2010

Upload: sanane

Post on 08-Nov-2015

7 views

Category:

Documents


0 download

DESCRIPTION

Engineering Capabilities w.r.t. organization

TRANSCRIPT

  • Dubai Drydocks World

    Engineering Capabilities

    By: Willem Vijfhuizen / 05.07.2010

  • INTRODUCTION

    Design Capabilities

    Engineering Department

    Computer Software

    Designs

    Concept Design

    Feed Studies and Basic Design

    Production Engineering

  • DESIGN CAPABILITIES

    DDW has the Design Capabilities of designing complete Floating OffshoreStructures for Exploration, Construction, Production and Specialized

    Vessels

    DDW perform Concept Design, FEED Studies, Basic Engineering andProduction Engineering in house

    DDW has Marine Engineering capabilities in Naval Architecture, Structural,Marine Systems and E&I design

    DDW performs lifting engineering and load out engineering during theconstruction phase

  • ENGINEERING DEPARTMENT

    Department

    - Main Engineering Department is located in Dubai

    - 40 engineers

    - 80 draftsmen and supporting staff

    - Qualified engineers in various disciplines

    Disciplines

    - Naval Architecture

    - Structural

    - Marine Systems

    - E&I

    - 3D Design and Animations

  • COMPUTER SOFTWARE

    Autodesk 3ds max 3D design

    Adobe creative suite 3D design

    Rhinoceros 3D design

    MaxSurf Hull forms and basic geometry

    Maxsurf Resistance and Propulsion

    Maxsurf Sea keeping

    SESAM Global Strength and Fatigue Analyses

    Strand7 FE Analysis Software

    CEASAR Pipe Stress Analysis Software

    SKM Power Tool Short Circuit Calculations

    MathCAD Engineering Calculation Software

    AutoCAD Drafting Software

    FORAN 3D Modelling Software for Production Engineering

  • DESIGNS

    Exploration

    Drilling Jack Ups / Drilling Semi Submersibles /Drilling Vessels

    Construction

    Heavy Lift Vessels / Pipe Lay Vessels / Cable Lay Vessels /Accommodation

    Vessels / Wind Turbine Installation Vessels

    Production

    Floating Storage and Offloading vessels (FSO)

    Floating Production and Offloading vessels (FPSO)

    Floating Production Unit semi-submersible (FPU)

    Floating Liquefied Natural Gas vessels(FLNG)

    Floating Storage and Regasification Units(FSRU)

    Floating Regasification Units (FRU) e.g TORP EasyLNG

  • DESIGNS

    Specialized Offshore Vessels

    Offshore Support Vessels (OSV)

    Platform Supply Vessels (PSV)

    Diving Support Vessels (DSV)

    Anchor Handling Tug Supply Vessel (AHTS)

    Safety Standby Vessels (SSV)

    Seismic Research Vessels

    Ocean Graphic Research Vessels

    Workboats and Barges

    Tugs / Fireboats / Pilot Boats / Crew Boats / Patrol Vessels / Tank Barges

    Dry Cargo Barges

  • CONCEPT DESIGN

    During the Concept Design the following will be prepared:

    - Outline Specification Specification

    - General Arrangement

    - Resistance and Power Curve

    - Sea Keeping Analysis

    - DP Capability Plot

    - Preliminary Stability Calculations

    - Electrical Load Analysis

  • CONCEPT DESIGN

    LNG Carrier

    Hull Specifications:

    Length : 107.00 M

    Breadth : 21.60 M

    Depth : 7.40 M

    Draft : 4.80 M

    LNG : 12100 M3

  • FEED AND BASIC DESIGN

    During the FEED and Basic Design the following will be prepared:

    - Building Specification

    - Accommodation Lay Outs

    - Machinery Compartments Lay Outs

    - Main Structure Construction Plans

    - Foundations of Major Equipment

    - Piping Diagrams

    - Electrical Diagrams

    - Major Equipment Specifications

    - Analyses reports for Naval Architecture, Structural, Marine Systems and

    E&I

    - Inclining Experiment Reports

  • FEED STUDY

    LNG FPSO

    Hull Specifications:

    Length : 400.00 M

    Breadth : 64.00 M

    Depth : 33.60 M

    Draft : 16.00 M

    LNG : 210000 M3

    LPG : 20200 M3

  • BASIC DESIGN

    Easy LNG

    Hull Specifications:

    Length : 170.00 M

    Breadth : 30.00 M

    Depth : 10.00 M

    Draft : 6.20 M

  • BASIC DESIGN

    FLOATING OFFSHORE STRUCTURES

    FE - Analysis of Spread Mooring System of an FPSO

  • BASIC DESIGN

    FLOATING OFFSHORE STRUCTURES

    Piping Stress Analysis for Steam Line in Engine Room

  • COMPLETE VESSEL DESIGN

    AHTS Vessel 3D model

    Specifications:

    Length : 45.00 M

    Breadth : 12.60 M

    Depth : 6.00 M

    Draft : 4.60 M

    Bollard Pull : 90t

  • COMPLETE VESSEL DESIGN

    AHTS Vessel Model tests AHTS Vessel Sea Trials

  • PRODUCTION ENGINEERING

    During the Production Engineering the following will be prepared:

    - 3D Modelling

    - Detailed Lay Out Drawings

    - Machinery Compartments Lay Outs

    - Equipment Foundations

    - Outfitting and Details

    - Pipe Arrangements (2D/3D0, Isometrics, Pipe Supports, Spool Design

    - Cable Schedules

    - Cable Trays and Ventilation Ducts

    - Build Strategy Preparation

    - Plate and Profile Nesting

    - Lifting and Load Out Engineering

  • PRODUCTION ENGINEERING

    NEW BUILD VESSELS

    Seismic Vessel

    Specifications:

    Length : 82.00 M

    Breadth : 19.00 M

    Depth : 8.00 M

    Draft : 6.60 M

  • PRODUCTION ENGINEERING

    CONVERSION PROJECTS

    FPSO Frade Detail Design of Marine Engineering

  • PRODUCTION ENGINEERING

    FLOATING OFFSHORE STRUCTURES

    Semi Submersible Hull

  • PRODUCTION ENGINEERING

    FLOATING OFFSHORE STRUCTURES

    3D Structure Model

  • PRODUCTION ENGINEERING

    FLOATING OFFSHORE STRUCTURES

    3D Pipe Routing Model

  • LOAD OUT ENGINEERING

    Load out Seismic Vessel to Hydro Lift

  • LOAD OUT ENGINEERING

    Float Off / Launch of Seismic Vessel

  • LIFTING ENGINEERING

    Lifting of a Flare Tower