ENGINEERING DRAWING

Teknik Kendaraan RinganSemester 1th Class XKompetensi Kejuruan

DKK SK-KD 4TH

2

DIAGRAM ALUR PENCAPAIAN KOMPETENSI

Teknologi dan Rekayasa3

Target of Lesson

Student can know standard angle blocks to draw engineering

Student can draw perspective, projection, view and cross section

Teknologi dan Rekayasa4

Recognizes Device To Draw Engineering

Drawing Paper

Drawing Paper Size

Teknologi dan Rekayasa5

Pencil & Pen

PencilRapido

Pencil

Recognizes Device To Draw Engineering

Teknologi dan Rekayasa6

Jangka

Recognizes Device To Draw Engineering

Teknologi dan Rekayasa7

Ruler

Recognizes Device To Draw Engineering

Teknologi dan Rekayasa8

Screen painting Ruler

Recognizes Device To Draw Engineering

Teknologi dan Rekayasa9

Arc Ruler

Recognizes Device To Draw Engineering

Teknologi dan Rekayasa10

Standardization of Engineering Drawing

Standardization of Letter and Numeral

Explains.

Same .

Technical Letter and drawing number always becomes way to show the engineering drawing purposes and objectives clearly its..

Technical Letter and drawing number also becomes decoration for drawing the engineering. On that account position of drawing and also letter and number need to be arranged in such a manner so that easy to read.

the Letter and number can be erect or oblique

Teknologi dan Rekayasa11

Standardization of Engineering Drawing

Standardization of Drawing Line

Drawing Line: To make ridge from form of a substance in drawing

Mirage Line: In the form of dash line with thickness of line 1/2 ordinary line weightses. Applied to make ridge something substance that is is not seen direct by ocular.

Liver Line: In the form of line “ stripe, point, stripe, point “ with thickness of line 1/2 ordinary lines. Applied to show axis a substance drawn.

Scale Line: In the form of trim lines with thickness of 1 / 2 from ordinary line weights.

Secant: This line in the form of line “ strip,titik,titik,strip” with thickness of 1/2 ordinary line weightses.

Teknologi dan Rekayasa12

Line Usage

Standardization of Engineering Drawing

Teknologi dan Rekayasa13

Line Usage

Standardization of Engineering Drawing

Teknologi dan Rekayasa14

Standardization of Engineering Drawing

Squeezing lines

If when two lines or more different of its(the type squeezs, hence its the depiction must be executed as according to priority like following).

Drawing line ( Thick line joints, type A) Line is not seen ( line incises medium, type D) Secant ( line is having point, which dipertebal

its(the noses and place of direction transformations, type F)

Axis lines ( line is having point, type E) Line assists, measure line and hachures line ( trim

lines joints, type B).

Teknologi dan Rekayasa15

Level of diminution

At usage of format DIN, level of diminution to the next DIN format with photocopy is 70,7%, for example from DIN A3 becomes DIN A4.

Level of enlargement

For enlargement from format DIN to format DIN which is the next larger ones, applied level of enlargement 141,4%, for example from DIN A4 becomes DIN A3. this Diminution and also enlargement arranged automatically at copier.

Standardization of Engineering Drawing

Teknologi dan Rekayasa16

Line widthEligible line width, so that at diminution or enlargement, normal line width wanted able to emerge.

Wide in set of mm.

Standardization of Engineering Drawing

Teknologi dan Rekayasa17

Standardization of Engineering Drawing

Writes high

Writes high also can be written, so that if minimized or enlarged able to be adapted for which we to wish.

Height in set of mm.

Teknologi dan Rekayasa18

Perspective Drawing

Perspective with one points loses

Teknologi dan Rekayasa19

Perspective Drawing

Perspective with two points loses

Teknologi dan Rekayasa20

Perspective Drawing

Perspective with three points loses

Teknologi dan Rekayasa21

Projection Drawing

Piktorial Projetion

Teknologi dan Rekayasa22

Projection Drawing

Isometris Projetion

Teknologi dan Rekayasa23

Projection Drawing

Dimetris Projetion

Teknologi dan Rekayasa24

Projection Drawing

Projection of Parallel Incline

Teknologi dan Rekayasa25

View Drawing

Kind of view

Teknologi dan Rekayasa26

View Drawing

European Projection View

Teknologi dan Rekayasa27

View Drawing

American Projection View

Teknologi dan Rekayasa28

View Drawing

Projection Symbol and Dart

Teknologi dan Rekayasa29

Cross Section Drawing

The cross section drawing or function slicing to explain parts of invisible substance drawing

Teknologi dan Rekayasa30

Cross Section Drawing

Placement of Cross section Drawing

Teknologi dan Rekayasa31

Cross Section Drawing

Substances which may not be cut

Cross Section of Solid Radius

Teknologi dan Rekayasa32

Cross Section Drawing

Substances which may not be cut

Cross section of bushing

Teknologi dan Rekayasa33

Cross Section Drawing

Cross section type

Full cross section Half cross section

Teknologi dan Rekayasa34

Cross Section Drawing

Cross section type

Cross Section Partly

Cross Section of Rotary

Teknologi dan Rekayasa35

Cross Section Drawing

Cross section type

Cross Section Branchs or Jumping

Teknologi dan Rekayasa36

Electrical Symbol

CONTACT BREAKER7.

Switch6.

Switch5.

CONNECTOR4.

Not Connection3.

Connection2.

Wire1.

NAMESYMBOLNO

BATTERY14.

RESISTANCE13.

BULB12.

IGNITION COIL11.

GROUND10.

SPARK PLUG9.

FUSE8.

NAMESYMBOLNO

_ _ _+ + +

Teknologi dan Rekayasa37

TRANSISTOR :TYPE: - A: PNP - B: NPN

19.

SCR = SILICON CONTROL RECTIFIER

18.

ZENNER DIODA =17.

DIODA / RECTIFIER16.

BATTERY15.

NAMESYMBOLNO

VOLT METER23.

AMPERE METER24.

MOTOR13.

HORN24.

CONDENSATOR TYPE :-A:NON PLRITAS-B:BER PLRITAS

23.

NAMESYMBOLNO

A B

_ + + +_ _ _ +

M

V

A

Electrical Symbol

Teknologi dan Rekayasa38

Wiring Diagram

Ignition System

Teknologi dan Rekayasa39

Wiring Diagram

Charging System

Teknologi dan Rekayasa40