english manual for duster

CAR MULTIMEDIA PLAYER

English Version

Made in China

BDVM-DUSTER

00

2

Contents

Common Operations2

To Select Source by Menu 12Reset the Unit 12Turning the Unit On/Off 12Volume Control 12Setting the Sound Characteristics 12EQ Setting 13Turning Loudness On/Off 13Insert an SD Card 13Eject a Disc 13Mute Function 13Mode Selector 13Infrared Sensor 13

13Screen Display 13Double Function

1 Before You StartImportant Safeguards 4 About this manual 4Precautions 5Maintenance 6Location & function of the controls 7Remote control 8 Specifications 10Wiring connection 11

1 5 Main MenuMain Menu Setup 14 Video Adjust 14Audio Adjust 14Time Adjust 15SCREEN ADJ 15SYSTEM 15KEY CONFIG 16BACKGROUND 16DEFAULT 16

3

DVD/VCD/MP454

DVD/VCD/MP4 Setup 17DVD/VCD/MP4 Play 17Selecting Tracks Fast 17Number Buttons 17Pause the Playback 17Stop the Playback 17Play tracks at Random 18Repeat Playing 18Skip backward/forward/F.F/F.REW thePlayback 18System Switch 18Slow Motion Playback 18Increase the size of Picture 18On Screen Display 18Setting the Playback Time 19Changing Audio Language 19Changing the Subtitle Language 19Changing the Viewing Angle 20Selecting Channel 20Program Playing 20Playing PBC(Menu) 20Selecting MENU 21DVD Setup MENU 21

39

11

Simple Troubleshooting Guide

No power. Check and make sure whether the fuse is blown, replace with the proper value if necessary.

Some errors occur in LCD or no function pressing the button.

the when

Unable to receive stations.

CDs cannot be loaded.

Sound skips.

Images skip.

Press RESET button.

Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly.

A CD is loaded in the mechanism.

The CD is dirty or damaged.

Improper setting of the color system. Set the color system according to the connected television.

to PAL or NTSC

.

.

.

Note: If any of the problem persist after check list had been made, consult your nearest service dealer. Never attempt to disassemble your unit by yourself.

The following checklist might helped to solve the problems which you meet when usingthe unit. Please double check and make sure if the connection and the procedure ofthe operation is properly before using the checklist .below

Problem Cause/Solution

..

.

Due to continuous product improvement, the operations are subject to run the model.

Additional Information

00

3

Contents

Bluetooth Operational Interface 33Using a Bluetooth Wireless connection 33Pairing Your Unit and Bluetooth Phone 33 Pairing in Handsfree Mode 33Cellphone Pairing Mode 34Bluetooth Connection and Disconnection 34Using the Unit as a Handsfree Device 34Last Number Dialing 34To Dial by Cellphone 34To Dial by the Unit 35Using the Unit as Bluetooth Music 35Audio Transfer between The Unit and Phone 35

Bluetooth Mode8

Simple Troubleshooting Guide 39

Additional Information 11

5 CD/MP3/SD/USBCD/MP3/SD/USB Setup 27CD/MP3/SD/USB Play 27Selecting Tracks Fast 27Repeat Playing 27Number Buttons 27Playing Tracks at Random 28Stop play 28Pause the Playback 28Skip backward/forward/F.F/F.REWthe Playback 28Selecting Track 28On Screen Display 29Program Playing 29Eject SD Card 29Eject USB 29

6 TunerListening to the Radio 30Band Selector 30Manual/Automatic Tuning 30DX/LOC Selector 30Selecting The stored Station 30MO/ST Selector 31Scanning/Memorizing Stations Automatically 31Goto FREQ 31Number Buttons 31

AUXAUX Touch Screen Menu 32

7

TV Touch Screen Menu 38

TV10

9 IPODIPOD Play Selecting Tracks Fast Playing Track F.F/F.REW Repeat Playing Playing Tracks at Random Pause the Playback

363636

3636

37File Selector 37Eject IPOD 37

38

Press SRC or TV on the source menu to sw-itch to the TV mode:

TV Touch Screen Menu

10 TV

Touch the screen above to enter the following menu:

MENU

Press / to choose the station towards theleft or the right.

OK CANCEL

Setting Menu

TV Channel

TV Guide

Program detail

Channel Scan

Optian

Press MENU on the screen above to open theTV setup menu as follows:

Press the item to set the corresponding setting.Press OK to save the setting and CANCELto cancel it.

Before You Start

IMPORTANT SAFEGUARDS About this manual

Be sure to connect the color coded leads according to the diagram. Incorrect con-nections may cause the unit to malfunct-

, ion or damage the vehicles electrical sy-stem.

Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never conn-ect the left and right channel speaker c-ables each other or to the vehicle body.

Make sure all the connections are comp-letely correct before turning on your unit.

When replacing the fuse(s), the replace-ment must be of the same amperage as shown on the fuse holder. Do not block vents or radiator panels. B-locking them will cause heat to build up inside and may result in fire.

This unit features a number of sophisti-

cated functions ensuring superior

operation. All the functions have been

designed for the easiest possible use,

but many are not self-explanatory. This

manual will help you understand the

functions and operations of the unit.

This manual main explains remote

control operation. However, in

addition to those functions related with

DVD/VCD/CD/MP3/MP4 operation

that can only be operated by the remote

control, there are also functions can be

operated by the buttons provided for

the main unit.To

nstall the unit in an apt pl-ace.

lest the driver distrack his attentionfrom, please i

Using the unit after starting the engine,otherwise

the electric energy of battery wasused up.

the unit can not be started, be-cause

The unit must be screened from direct sunlight, or the will be wasting for the high temperature.

electric energy of battery

Do not use the unit in extreme high tem-perature or such low temperature condi-tions, and also avoid humidity and direct sunlight.

Take care of the magnetism of the unit.Do no put the credit card, cassette or w-atch around the unit, or they would be broken or some information in them lose.

To lest disturb the video frequency, keep far away from the unit when using your phone.

Do not put the remote under high temperature or where the sun strikes it, or else the control remote can not worknormally.

control 12

1

2

3

4

5

6

7

8

9

10

11

37

IPOD

During IPOD mode, to take IPOD out, the main unit will switch to radio mode.During other mode, to take IPOD out, the main unit will keep the original mode.

Eject IPOD

Note:

During IPOD mode, press SETUP on the remote control to go back to the previouscatalog.

File Selector

Press to select the previous 5 tracks,press to select the next 5 tracks (showas in the right of the picture).

* Clicking MENU on the screen and / also perform the same function.

19

21

01-Kiss Goodbye

01-My Heart

01-Sent Love to Me

01-Take it easy

02-Love Story

09

01

5

Before You Start

Type of disc

VCD

MP3

CD

NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.

DVD

Handle the disc by its edge to keep

the disc clean, and do not touch the surface.

Do not attempt to modify the unit, modifying the unit may cause an accident.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit . To enjoy optimum sound and images while playing, handle the discs as follows:

Do not use your CDs with paste residue

or ink attached.

Do not use CDs with labels or stickers

attached, which may leave a sticky residue

while beginning to peel off.

(Shown as the picture)

Clean the discs with an optional clean-

ing cloth. Wipe each disc from the center out.

(Shown as the picture)

PRECAUTIONS

This unit can play the following discs only:

Label on the disc Recorded material

Sound and moving pictures

Sound and moving pictures

Sound only

Sound only

Size of disc

MPEG-4Sound and moving pictures

36

Press or to play the track fast for-ward or fast rewind . Press it again or press ENTER to resume to play normally.

Playing Track F.F/F.REW

20

Repeat Playing

During playback, press Press it again to

cancel this function.

RPT to trackrepeat, disc repeat, off.

* This function is operated by using the remote control only.

15

Note:

Playing Tracks atRandom

During IPOD playback, when RDM button, Shuffle off,

pressingShuffle Track,

Shuffle Album will be activated.

16

Note:

* This function is operated by using the remote control only.

IPOD play

During IPOD playback, connect the IPOD wire (5V) to the one in backside of main unit. The unit will play track in IPOD.If a IPOD is loaded, you can back to the source status, press IPOD to enter into IPOD setup:

Back to the previous menu.(First connect, click and hold it to backto root menu.)Briefly press to play previous track,press and hold to fast forward.

Play/ pause

Click it to turn page up.

Briefly press to play next track,press and hold to fast reward.

Selecting Tracks Fast

* Clicking / on the screen performs the same function

Note:

During IPOD playback, first press to return to the beginning of the current track, press again within 3 seconds to playprevious track ,press to play next track .

21

21

21

* Clicking and holding / on the screen performs the same function

Note:

Pause the Playback

During IPOD mode, press

button to pause the playback, Press it again to return to normal playback.

Clicking on the screen also performs

the same function.

Note:

*

17

IPOD

Unknown Al

Jackie Zha

02-I SWEAR

24/131

00:01:36

Click it to turn page down.

Click it to back to the SOURCE menu.

09

Before You Start01

6

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fu-ses. If the fuse is blown, check the po-wer connection and replace with a n-ew one. If the same problem occurs, it would be subjected to the malfun-ction. In such cases, please consult to the nearest service dealer.

When the range of the operation of t-he card remote control becomes short or no functions while operating. Rep-lace the lithium battery with a new b-utton cell (CR2025). Make sure the b-attery polarity before replace.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Make sure the proper polarity whenloading with the battery.

To prevent short circuit, do not use metal tweezer to clip the battery.

Gently pull out the Battery Holder whilepressing the Stopper.

Put the button-type battery with mark(+) upward into the Battery Holder.

Replacing the Battery

Insert the Battery Holder into the Remote

Control.

!

Maintenance

WarningNever use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.

Warning!Improper handle with the battery may lead to explosion.It cannot be charged , disassembled or thrown into a fire.

!

35

Bluetooth

To Dial by the Unit

when cellphone is connected, press to input the call number, then press to dial, DIAL OK appears, when the call is pick up, and it appears PICK UP.

23

Note:

* Press CLEAR on the remote control or in the monitor to delete wrong inputs.

22

Using the Unit as Bluetooth

Music

During bluetooth mode, the musics on the cellphone switch to the unit for play.To select music fast: press to play the previous track, press to play the nextone.Pause play: press to pause play.Stop play: press to stop play, and press the PLAY to play the current trackagain.

21

Note:

17

18

30

* Pressing and in the monitor also performs the same function.

Audio Transfer between the Unit and Phone

Press to change the conversation from the unit to the cellphone.

Note:

* The function will be cause to be disconnected bluetooth link for some phones, but you do not worry just press button while private conversation with some phones, then switch back to the unit automatically.

6

68

* This function is only valid on remote control .

08

01

7

Before You Start

Location of the Controls

The Front Panel

34

08 08

Cellphone Pairing Mode

1. Browse your cellphone menu and find the connectivity or Bluetooth connection section.2. Select search for a new handsfree device function and allow the phone to find the mobile. (Different cellphone has different bluetooth menu, please refer to your phone manul.)3. When CAR A/V DEVICE appear, select this item. ( if it can not be connected, please refer to mobile manual, and connect it again.) 4. To input the password, the password is: 1234.5. Press the connect with the Handsfree option on your cellphone, and CON- NECT appears.

Bluetooth Connection and Disconnection

When established bluetooth connection

between this unit and the cellphone, bluetooth

icon on the display appears in red.

Press PAIR to turn off bluetooth con-

nection, and appears in blue.

Press ,PAIR SUCCESS appear on

the display, then display shows CONNECT

when bluetooth connected; display shows

PAIRING TIME OUT, when bluetooth

disconnected.

29

29

Note:

* Please keep the phone battery is full of power, or else the bluetooth connection will be disturbed.* To ensure connection succeed----Please delete menu of cellphone with blue-tooth.----Please reset the unit and cellphone.----Please reset every step of pairing. * Disconnect after paring----Please pair the phone in manual.For example: pairing fixture cellphone connect.

To Dial by Cellphone

1. The unit activated automatically when you make a call by cellphone, and DIAL OK appears.2. When you receive a call, PICK UP appears on the display.

Using the Unit as a Handsfree

Device

When the unit is ringing, then it appearscall from and the phone number ID***********on the dialing, To accept call: Press to answer a call,it appears PICK UP on the display.To reject call: Press to reject a call,it appears REJECT on the display.To end call: Press to end call, and HANG UP appears on the display.

Note:

* Some of cellphones do not support reject call during bluetooth mode.

* Pressing and on the monitor performs the same function.

30

31

Last Number Dialing

Press button, it appears last call number on , press again, and then PICK UP appears on the display during conversation.

Note:

30

4

* Pressing on the monitor performs the same function. * To dial the number of the unit in the car only.

* Pressing on the monitor also performs the same function.

5

* Press on the monitor to turn off the bluetooth function.

7

Bluetooth

NAVI

SRC

MUTE

RADIO

DISP

A/V IN

SD GPS

RES

ENT SEEK

MIC

PWRVOL

REMOTE Infrared Sensor2

3 SRCPress it to select different modes available.

5 DISPPress this button first to enter the nightmode, press it again to close display, pressthird to resume.

6

Press this button to mute.

MUTE Button

8 GPS CARD Slot

9 SD CARD Slot

10 USB Slot

7 A/V IN

During waiting mode, briefly press to turn on the unit, press and hold it to turn off; rotate it to adjust the volume up or down.

11 PWR/VOL

4 SEEK (adjust frequency)

Press it to insert or eject a disc.

Eject Button15

11 Screen Resolution: 800 x 480 DPI

12 Disc Loading Slot

16 RES ButtonPress this button to set the unit to initialstatus.

13 RADIODuring other modes, press this buttonto change to radio mode. During radio mode, press it to changebands.

14 NAVIDuring others modes, press this buttonto change to navigation mode, press it again to return to the previous mode.

MIC (for bluetooth)17

Before You Start01

8

Remote Control

Tips:For more information as to replacing battery, please refer to Replacing the Battery on page 6.

1

2

3

4

5

7

20

6

8

9

10

11

12

13

14

15

16

17

18

19

21

22

23

24

2526

27

28 31

29 30

33

08Bluetooth

Bluetooth Operational Interface

Press BT on the remote control or BT in the monitor to open the bluetooth operationalinterface:

28

2 Dal, last phone, answer a phone.i

3 Hang up, refuse a phone.

4 Number Show

PAIR5

6 ACH (audio change)

C (clear)8

POWER7

Press it to turn on or turn off the bluetooth function.

1

To input the phone number.

Number Buttons

9

Using a Bluetooth Wireless

Connection

The device can be dialed wirelessly in bluetoo-th status. Before using the bluetooth function, please turn on your cellphone bluetooth func-tion.

Pairing Your Unit and BluetoothPhone

The device supports handsfree profile,head-

set profile, A2DP( Audio Advanced Distri-

bution profile)and AVRCP(Audio Video

Remote Control profile). Follow the pairing

instruction for the first time use, after that

the unit will connect automatically.

Note:

* To provide the best sound without or little distorted sound(the cellphone or network brings).

* Full duplex conversation.

* Bluetooth ver2.0 compliant.* The unit has own MIC.

Pairing in Handsfree Mode

1. Press PAIR, and PAIRING shows on

the screen.

2. To get into CELLPHONE CONNECTION

to search fixtures;

3. If the cellphone has connected, PAIR

SUCCESS appear and then CONNECT

in order, will change from blue to red.

29

Note:

* Clicking on the screen also performs the same function.

5

33

11

1010

99

PAUSE/PLAY

44

1111

10 / Previous / Next

11 Press this button to back to SOURCEmenu.

01

9

Before You Start

1 SOURCE/PWR

4 AMS/MENU

3 BAND/TITLE

5 LOC/SUB -T

6 ST/AUDIO (mono or stereo/language orchannel selector)

10 Slow Forward/Rewind)

7 ANGLE(DVD play angle)

13 PROG(Program playing)

12 Mute

11 P/N

9 ZOOM (zoom in or zoom out)

2 GOTO (playing time/ track/[press and holdit to enter/exit the NAVI])

RPT(Repeat Playing)15

RDM (Playing Tracks at Random)16

VOL+/VOL-/SEL14

8 OSD

Press it to show the current information;in radio mode, press and hold it to showthe version number .

25 LOUD ( loudness)

SETUP19

(F.R/F.F)20

CLEAR22

0~9 (Number) Buttons23

(Eject Button)24

18 (Stop Playing)

EQ (equalizer) Button26

21 (Previous/Next Track)

ENTER 27 (Left/Right/Up/Down ENTER)

17 (Pause/Play)

28 BT (bluetooth mode) Button

29 PAIRDuring bluetooth, press this button to pair.

30

During bluetooth, press to dial, dials again or answer a phone.

31

During bluetooth, press to hang up or refusea phone.

Press it to change the TV system, press and hold it to capture the instant likeness as a logo type.

32

07

Click AUX on the SOURCE menu to switchto the AUX mode:

AUX Touch Screen Menu

33

44

55

11

22

33

44

55

22

11

66

66

Full screen

Click it to enter front AUX IN.

Click it to enter VIDEO setup menu,see page 14 of the "Video Adjust".

Display

Click it to enter SOURCE menu.

Click it to enter rear AUX IN.

AUX

Before You Start

10

01

AM Tuner Section

VCD/CD Player Section

530-1710 (KHz)(U.S.A.)

VCD Signal System AUTO/PAL/NTSC

General

FM Section

87.5-108(MHz)

(Europe)

87.5-107.9(MHz)(U.S.A.)

10.7MHz

10dBuV

60dB

30dB 1KHz

40 -12KHzHzNote:

Due to continuous product improve-

ment, specifications and design are

subject to change without prior notice.

Specifications

Power Requirement 14.4V DC(11-16V allowable)

Load Impedance

7dB

Bass 100Hz

Treble 10KHz

Tone Controls

Tuning Range

IF Range

Usable Sensitivity

(-30dB)

Signal-to-noise Ratio

Stereo Separation

Frequency Response

450KHzIF Range

28dBuVUsable Sensitivity

(-20dB)

60dBSignal-to-noise Ratio

60dB(1KHz)Separation

0.3%Distortion

Max.Power Output 100W x 4

522-1620(KHz)

(Europe/Russian)

Frequency Range

(Optional)

(Optional)

65-74(MHz)(Russia)

DVD Player Section

DVD Signal System AUTO/PAL/NTSC

60dBSignal-to-noise Ratio

60dBSeparation

2Channels

40Hz to 16KHzFrequency Response

31

06Tuner

During radio status, you can press ST button on the remote control MONO mode or STEREO

to select mode.

Stereo reception is charged whenSTEREOappears. It is switched to MONO mode whenMONOappears.

MO/ST Selector

It is only valid on remote control.

It is only valid in FM tuning.

6

Switch to MONO compulsively to improve the listening quality when week signal.

Note:

*

*

*Number Buttons

During radio status, Number Buttons

(from 1 to 6) can help you yo-ur favorite station. You can follow the as below:

store steps

Press and hold AMS button to receive stations automatically, and store them in 1 to 6 number respectively.

23

During radio status, press Number Buttons to receive the stored stations.

4

When receiving a station,press and hold

any one of the Number Buttons

(from 1 to 6) until the number app-ears on the LCD, which indicates that station is already stored in the corresp-onding number button.

Press and hold another number button more than 2 seconds when listening in a station in one number buttons, thestation will be stored in that number button.

1

2

3

Clicking on the screen performs the same function.

Note:

* 5

Goto FREQ

2Press GOTO, and the monitor shows: FREQ, then press the Number to input the valid frequency, then the TV program will be played.

Note:

* It is only valid on remote control.

* It is only valid when GOTO FREQ is on in main menu.

Scanning/Memorizing Stations Automatically

During radio status, briefly press AMS button on the remote control to scan each stored seconds respectively wh-ich Number Buttons (from 1 to . You can press responding N-umber Buttons or ton when your desired station is And it starts pl-aying that station.

station 6stored in 6) the cor

AMS butcharged.

23

4

When press and hold AMS , automatically memory storing

The radio automatically selects and has it stored in any one of

Number Buttons (from1 to 6).

button it will activate function. a station the

Note:

The unit can be stored up to 6 stations for

each band.

4

23

It is only valid on remote control.*

*

01

11

Before You Start

30

06

Listening to the radio

LOC pears on the display and only local tion is available. when it disappears b

apsta

oth distance and local stations can be received.

DX/LOC Selector

During radio status, press LOC button to select or weak station reception.strong

5

The function is only valid on remote control.The function is invalid in AM tuning.

Note:

**

Band Indicator

Shows which band the radio is tuned to.

1

Preset Number IndicatorShows what preset has been selected.

2

Shows which frequency the tuner istuned.

Frequency Indicator3

Briefly press to tune by the presettable range, press and hold to tune automatically.

4

5

6 BAND

To select the bands.

7 AMSBriefly press to scan the current station,press and hold to tune automatically.

8 MENUPress it to enter the MAIN MENU.

9 MUTE

Press this button to be silent.

The 6 stations of the current band.

Briefly press to select station, press andhold to save the current station to oneof the 6 stations.

Selecting the Stored Station

During radio status, press button to select the stored station upward, press toselect downward.the stored station

27

Note:

The function is only valid on remote control.*

Note:

* Clicking on the screen performs the same function.

FM2

MW2(AM2) MW1(AM1)

FM3FM1

During radio status, repeatedly pressBAND buttonto select bands in

lowing order: the

fol

Band Selector

3

(For Two Bands)

6

Manual/Automatic Tuning

Manual Tuning: Briefly press ( button on the remote control to select thedifferent bands.

or )

Automatic Tuning: ress and ) buttonthe radio

a station or respectively and plays when it finds a station.

P hold (or automatically searches

downward upward

Note:

Tuner

10

Press this button to back to the SOURCEmenu.

* Clicking on the screen or pressing on the main unit performs the same function.

4

AUX

IN

IPOD

+USB

MAIN

SOCKET

AB

12

34

87

65

AUX

IN

IPOD

+USB

TV

MIC

ANT

GPS

RADIO

ANT

AB

12

34

56

98

71

2 1

1 1

0ANT

Wiring Connection

FAN

10

11

12

13

14

15

16

17

18

19

20

12

34

56

78

9

MAIN

SOCKET

MENU

2

46 789

5

103

02

12

Common Operations

Setting the Sound Characteristics Repeatedly and briefly press SEL button to select the mode in the following order:

desired

Reset the Unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

Note: * When ome errors occur on the

also press RES it will

s display, you can button to resume to normal,

and erase the clock setting and some memorized functions. * This function can only be operated by the main unit.

Press RES button in the panel wobject (such as a ball

the unit to initial status.

ith a pointed point pen),to set

14

After selecting the desired mode, youadjust the current level by pressing

.

can VOL

buttons

Note:

Press VOL+ button to increase sound level and press VOL- button to decr- ease sound level.

the

the

Volume Control

* Pressing VOL on the main unit also performs the same function.

14

14

Note:

Turning the Unit On/Off

Briefly press PWR button to turn on the unit in waiting status, and then press and hold it to turn off.

the 1

* Pressing PWR button on the main unit also performs the same function.

Note:

14

To Select Source by Menu

In any mode, touching on the screen shows the menu as follow:

Click your desired item to enter correspondingmode, and click SETUP to enter into the setting menu.If you want to navigate, click the GPS icon; if it did not enter into, that means the unit does not include the function.

TRE

BAL

BAS

VOL FAD

WOO

* This function is only performed by remote.

Please sliding horizontally on the screen turns over the menu as the figure below:

29

05

During CD status, press OSD button the display shows:

Single elapsed Single remain

Note:

* This function is operated by using the remote control.

On Screen Display

Program Playing

During CD mode, press PROG, the TFTdisplays the program menu. Press NUMBER BUTTONS to select the track Number andthen press to move the cursor to START,press ENTER to start program playing; move the cursor to EXIT and press ENTERto exit the program playing. Move the cursorto and press ENTER to the previous page; move the cursor to and press ENTER to the next page. During this process, press to cancel the program playing.

13

18

The function is only valid on remote control.

Note:

*

27

* Press CLEAR to clear the mistake input.22

Eject SD Card

Push SD card to eject it.During SD playing mode, to eject SD card toswitch to Disc mode; If there is no disc in the main unit, it will switch to USB mode, or else, it will switch to Radio mode.During other modes, to eject SD card to keepthe previous mode.

Eject USB

Pull USB to eject it.During USB playing mode, to eject USB toswitch to Disc mode; If there is no disc in the main unit, it will switch to SD Card mode,or else, it will switch to Radio mode.During other modes, to eject USB to keepthe previous mode.

CD/MP3/SD/USB

Display Off

02

13

Common Operations

Mode Selector

* Briefly pressing SRC on the main unit also performs the same function.

Note:

Repeatedly briefly press SOURCE button to select the different modes available.

1

Receptor on the main unit for the card

remote commander.

Infrared Sensor

2

Press button to shut off sound output. And appears on the LCD. Press it again to resume to previous volume level.

the

Mute Function

Pressing MUTE on the main unit also performsthe same function.

12

Note:

*

EQ Setting

Repeatedly press and hold button to choose the following modes turn:

EQ in

While listening to the popular music, classic music or rock music, you select the corresponding modes to adjust the sound quality ing EQ button.

can

perfectly byus

3

Note:

26

The default setting is OFF.

26

ROCK

CLASSPOP

OFF

* Setting EQ on the AUDIO SETUP menu also performs the same function.

Turning Loudness On/Off

Press activate loud func-tion. You can this button to increase the low quency, which can improve sen-si ty for ears. Press it again to quit this function.

LOUDbutton press

fretivi your

25

Note:

* This function is only valid on remote control .

Briefly press DISP to enter the screen

protection, do it again to back to previous

status.

Screen Display

* When the unit is in black screen, touching the screen also performs the same function.

Note:

Insert an SD Card

Common SD Card: insert a common SD card into SD CARD slot and the programsin the card will be played.Navigation SD Card: insert a navigationSD card(one loaded with a navigation map onto the SD card) in to GPS Card slot,

otherwise theis NAVI will not work.unit's

Eject a Disc

Press button to eject or insert a disc.

Note:

* Pressing on the main unit also performs the

same function.

24

Except for navigation, press NAVI on themain unit to activate the double function, means that the current radio or playing is on, press to switch to navigation status. Press it again to shut this function, back to the previous status.

NAVI

Double Function

28

05 CD/MP3/SD/USB

Selecting Track

2


Note:


During CD playback, first press GOTO, and TFT shows : disc go to:--:--,press your desired time of the playback by using num-ber buttons.Second press GOTO button, track go to:--:-- appears on TFT, also input your desirednumbers to play the current time of yourselection.During MP3/SD/USB mode, first press GOTO and the TFT shows:---. Then press NUMBER BUTTONS to input the MP3/SD track s Number to play it; secondly press GOTO button, and the TFT shows : --:--, now input the desired time to play the current track at this point.

2

Stop Play

During CD/MP3/SD/USB playback, Press to stop the playback.18


During CD/MP3/SD/USB playback,

RDM button on the remote control to play random under the directory which you select. P return to

press

any track at

ress it again to normal playing.

16


Note:

Pause the Playback

During CD/MP3/SD/USB playback, Press to switch between play and pause. Note:


Press ( or ) on remote control to perform fast rewind or fast forward.

Skip backward/forward/F.F/F.REW the playback

20

Note:


Note:


Press on screen shows the numberkeys, press the number to select track, press OK to play. *

Number Buttons

Note:


Press one of Number Buttons (0-9) on remote to select a track to be played.

23

14

03

Set up Main Menu

As the figure above on the menu, press andhold SETUP on the remote control or click it on the screen to enter setting menu as thefigure below:

This menu includes VIDEO, AUDIO, TIME,SCREEN ADJ, SYSTEM, KEY CONFIG,BACKGROUND, DEFAULT.

.

Click your desired item to enter corresponding setting sub menu

Main Menu

1.Video Adjust

After selecting VIDEO, the sub menu willbe shown as the figure below:

In this menu you can adjust BRIGHTNESS,CONTRAST and COLOR.Click +/- to adjust the corresponding numerical value, and then click SAVE tosave preferences or click RESET to back tothe default setting.Click to back to the SOURCE menu, click to back to the previous menu.

Please sliding horizontally on the screen turns over the menu as the figure below:

Click icon on the screen to back to the SOURCE menu.

2.Audio Adjust

After selecting AUDIO, the sub menu willbe shown as the figure below:

In this menu you can adjust TREBLE, BASS,SUBWOOFER and EQ.Click +/- to adjust the corresponding numerical value, click / to choose yourdesired effect. Settings will be saved automatically.Click to back to the SOURCE menu, click to back to the previous menu.

27

05

During CD/MP3/SD/USB playback, touching the top of screen shows the following menu:

CD/MP/SD/USB Setup

* Clicking / on the screen also performs the same function.


21

Note:

During MP3/SD/USB playback, press to play previous track, press to play next track.

21

33

44

55

66

22119977 881010

CD/MP3/SD/USB

CD/MP3/SD/USB Play

Insert a CD/MP3 disc into the slot, the unit will play automatically.Take away the rubber plug USB or SDcard, then insert USB or SD card which will be played automatically.If there have be loaded a disc/USB/SD card, press DVD button on the unit to switch to play, or back to play source to select menu, press DVD to play.

10 9

During CD playback, press firstlyto repeat the current track, and in 3 second press to play previous track, press to play next track.21

21

21

Repeat Playing

During CD/MP3/SD/USB playback, press

replay the current track, press it again to replay all.

RPT to 15


Note:

* During CD/MP3 mode, the upper left corner

displays "DVD" ; during USB/SD mode,

the upper left corner displays "USB/SD".

Play/pause

33

44

55

66

22

11

77

88

99

1010

Full screen

Number keysClick it to back to root menu.

Click it to enter DVD setup menu.Click it to enter VIDEO setup menu,see page 14 of the "Video Adjust".

Fast reverse / Fast forward

Display

Previous track / Next track

Press it to enter SOURCE menu.

03

15

Main Menu

3.Time AdjustAfter selecting TIME, the sub menu will beshown as the figure below:

In this menu you can adjust the CLOCK and TYPE.Click the hour(minute,second) firstly and then click / to adjust the proper numerical value.

Click to back to the SOURCE menu, click to back to the previous menu.

Settings will be saved automatically.

4.SCREEN AD After selecting SCREEN ADJ, the sub menu will be shown as the figure below:

In this menu you can adjust the monitor byclicking icon shown on the screen until the icon shown at the middle of the screen, then click to save.

J

5.SYSTEMAfter selecting SYSTEM, the sub menu will be shown as the figure below:

In this menu you can set the KEY BEEP, BRAKEDETECT, REVERSE POLA and GPS VOICE PROMPT.Click the to choose your desired pattern.Click / to turn another page as the figure below:

/

In this menu you can set the AMS FULLUP,LOCAL AREA, PANEL LIGHT, REVERSEDETECT.

KEY BEEP: The key beeps when set ON, silent when set OFF.

BRAKE DETECT: Brake is detected automaticallywhen set ON, automatic detection closes when set OFF.

REVERSE POLA: Reversed signal is sent to the unit +12V when set BATTERY, 0V when set GROUND.

Click the / to choose your desired pattern.Click to back to the SOURCE menu, click to back to the previous menu.

GPS VOICE PROMPT: GPS voice promptis heard only during navigate mode whenset OFF, heard during any mode when set ON.

* If GPS voice reported incomplete, please adjust the volume of the map.

Note:

26

04 DVD/VCD/MP4

Password Example showing how to set password, and the default password is 8888.

(Press , or , then press ENTER)(Press

--Preference Page--

Go To Preference Page Change Password

--Preference Page--

--Password Change--

Password Password Change

16

03 Main Menu

AMS FULLUP:All the pre-existing radio depositexpires no longer allowed to save a new radio when set ON; searching and them re-cover all of the stored radio stations when set OFF.

LOCAL AREA: Depending on your area to chooseEurope, America or RUSSIA, in order to search quickly the radio station.

PANEL LIGHT: The front panel button light is notcontrolled by the car headlight, as long as the unitworking, the panel light is lit when set OFF; be controlled by the car headlight when set ON.

REVERSE DETECT: The unit is not allowed to start while reversing when set OFF; if you set 10,15 or 20 second, that means the unit would start automatically while reversing, and then turn off after 10, 15 or 20 second running forward.

6.KEY CONFIG

After selecting KEY CONFIG, the sub menuwill be shown as the figure below:

You can set the steering wheel buttons havethese features on the menu.For example, press a steering wheel buttonfirstly, and then select VOL+ on this menu,after saving, you can press the steering wheelbutton to increase the volume.


* There is a default setting of the steering wheel buttons. Please re-learning if it has different operations.* Please according to the prompt appears on the screen. * Press button to learn , there will be a corresponding voltage display.

Note:

7.BACKGROUND

After selecting BACK-GROUND, the submenu will be shown as the figure below:

You can select different background pictureson this menu. Click a background in the right side to preview, hold it to save.


8.DEFAULT

After selecting DEFAULT, the sub menu will be shown as the figure below:

Click "VERSION" to display the informationof current version, different models show different data at different times.Pressing "RESET" will be prompted to reset, pressing "CONFIRM" can be reset to factory settings


25

04DVD/VCD/MP4

---Preferences page--

Disc Menu Example showing how to set Disc Menu Language:


--Preference Page--

Go To Preference Page Preferred Menu Language

--Preference Page--

Parental Example showing how to set parental control:


--Preference Page--

Go To Preference Page Set Parental Control

--Preference Page--

Audio Subtitle Disc MenuParental Default

Eng

Eng

Eng


Eng

Eng

Eng


Eng

Eng

Eng


Eng

Eng

Eng

2 3 4 5 6 7 8

GPgPg 13PgrRNc 17Adult

1 Kid Sat

Default Example showing how to set load factory setting:


--Preference Page--

Go To Preference Page Load Factory Setting

--Preference Page--


Eng

Eng

Eng


Eng

Eng

Eng

Reset

English

French GermanSpanish

Italian

PortugueseDutch

04

17

DVD/VCD/MP4

Press on screen shows the numberkeys, press the number to select track, press OK to play. *

Number Buttons

Note:


During DVD/VCD/MP4 playback, touching the top of screen shows the following menu:

DVD/VCD/MP4 Setup

Play/pause

DVD/VCD/MP4 Play

Insert a disc into the slot , the unit will automatically switch on, if a disc is loaded, press DVD button on the main unit to start the playback. If the unit is in other menu, press DVD to switch to disc play.

13



21

Note:

During DVD/VCD/MP4 playback, press to play previous track, press to play next track.

21

Press one of Number Buttons (0-9) on remote to select a track to be played.

33

44

55

66

22119977 88

33

44

55

66

22

11

77

88

99

1010

1010

Full screen

Number keysClick it to back to root menu.

Click it to enter DVD setup menu.Click it to enter VIDEO setup menu,see page 14 of the "Video Adjust".

Fast reverse / Fast forward

Display

Previous track / Next track

Press it to enter SOURCE menu.

During DVD/VCD/MP4 playback, press to switch between play and pause; During stoping mode, press this button to resume playback mode.

Pause the Playback

17

Note:


Stop the playback

During DVD/VCD playback, first press, , then press or on the remote control to replay; press twice to stop playing completely, then press to return to the beginning of the current track.During MP4 playback, press first, thenpress to return to the beginning of thecurrent track.

* This function is only operated by remote.

Note:

24

04 DVD/VCD/MP4

--Downmix Setup--

DOWNMIX Example showing how to set stereo mode:

(Press (Press , or , then press ENTER)

--Downmix Setup--

DOWNMIX

Go To Downmix Setup

DOWNMIX

Downmix (1+1) Setup

Lt/RtStereo

--Downmix Setup--

---Preference page---

Audio Example showing how to set Audio language:


--Preference Page--

Go To Preference Page Preferred Audio Language


Eng

Eng

Eng

--Preference Page--


Eng

Eng

Eng

Subtitle Example showing how to set subtitle language:


--Preference Page--

Go To Preference Page Preferred subtitle Language

--Preference Page--

English


Italian

PortugueseDutch


Eng

Eng

Eng


Eng

Eng

Eng

English


Italian

PortugueseDutch

23

18

04

Repeat Playing

During DVD playback, press ing

RPT on the remote control to perform replayfunction as followings:

* This function is only valid on remote control.

15

Note:

Chapter Title

Repeat Off

During VCD/MP4 playback, press RPT on the remote control to TRACK REPEAT.

Slow motion playback

During DVD mode, press to slow play. There are speeds as follow:

During VCD/MP4 mode, press to slow play. There are speeds as follow:


Note:

*

During DVD/VCD/MP4 mode, Press ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum is reached.size

Increase the size of picture

9

No Change


Note:

*

2X 3X 4X

To remove the image by pressing button.* 27

Note:

Press ( or ) on remote control to perform fast rewind or fast forward. Each pressing will change as follow:

Skip backward/forward/F.F/F.REW the playback

20

16X 2X 4X 8 X


During DVD/VCD/MP4 playback,

RDM button on the remote control to play random under the directory

which you select. P return to

press

any track at ress it again to

normal playing.

16

* Clicking on the screen also performs the same function.

Note:

During DVD/VCD mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system.

System Switch

NTSC

PAL

AUTO

Note:

On Screen Display

During DVD status, press OSD buttonthe display shows:

8

Title Elapsed

Chapter Elapsed

Chapter Remain

Title Remain

Display off

DVD/VCD/MP4

All

32X


* This function is only valid on remote control.

During VCD/MP4 status, press OSD buttonthe display shows:

Single Elapsed

Total Elapsed

Total Remain

Single Remain

Display off


Note:

*23

04DVD/VCD/MP4

--General Setup Page--

SPDIF Example showing how to set captions on/off:



Tv DisplayAngle Mark

Osd LangSpdif Output

Screen Saver

Wide On

Eng

On

Go To General Setup Page




Wide On

Eng

Screen Saver On

SPDIF

Spdif/Raw Spdif Off

Logo Type Def

Screen Saver Example showing how to set Screen Saver on/off:





Screen Saver

Wide On

Eng

On





Screen Saver

Wide On

Eng

On

Screen Saver

On Off Logo Type Def

Logo Type Example showing how to set Logo Type:





Screen Saver

Wide On

Eng

On





Screen Saver

Wide On

Eng

On

Logo Type

Default Captured

Logo Type Def Logo Type Def

Logo Type Def

Logo Type Def

Spdif/Pcm

04

1919

DVD/VCD/MP4

During DVD mode, press GOTO buttonto set the playing time, when the TFT dis-play : /chapter/audio/subtitle/angle/title time/chapter time/repeat/time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press NU-MBER BUTTONS or [ ][ ] to set the current status.

title

2

27

27

During VCD mode, press GOTO buttonto set the playing time, when the TFT dis-play : /disc time/track time/repeat/time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press NUMBER BUTTONS or [ ][ ] to set the current status.

track

2

23

Setting the Playback Time

During MP4 playback, first press GOTO, and monitor shows : ---, press your desired track by using number buttons and press EN-TER to set the status. Second press GOTO button, and the monitor shows: -:--:--, input your desired time, then press ENTER.

2

* This function is operated by using remote control.

the

Note:

Changing audio language (Multi-audio)

DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can pressAUDIO to switch between language and audio systems during playback.

AUDIO 1 AUDIO 2 AUDIO 3......

Selection options switch as follows:


the

* This function only operates with DVDs fea-

turing multi-audio recordings.

* The number in the mark on a DVD's

package indicates the number of recorded

languages/audio systems.

2

Note:

6

Changing the subtitle language (Multi-subtitle)

With DVDs featuring multi-subtitle recor-dings. You can press SUB-T to switch between subtitle languages during playback.

Subtitles 1 Subtitles 2 Subtitles OFF



the

* This function only operates with DVDs fea-

turing multi-subtitle recordings.

* The number in the mark on a DVD's

package indicates the number of recorded

subtitle languages.

2

Note:

5

......


04

22

DVD/VCD/MP4

Example showing how to set picture mode:


Captions OSD Lang

Osd Lang

Angle MarkTv Display



Example showing how to set TV Display mode:Tv Display



TV Display

Example showing how to set language mode:


Screen Saver

Captions

TV DisplayAngle Mark

OSD Lang

On

Eng Off On

Set OSD Language

English

Angle Mark


Screen Saver

Wide On

Eng

On

Logo Type Def

Tv Display

Spdif Output

Screen Saver

Wide On

Eng

On

Def Logo Type

Normal/PSNormal/LB

Wide


Angle Mark



Screen Saver

Wide On

Eng

On Logo Type Def


Angle Mark

Screen Saver

Wide On

Eng

On Logo Type Def


Tv Display


On Off

OSD Lang

Tv Display Wide Angle Mark On

Osd Lang Eng Spdif Output

Screen Saver On Logo Type Def

--General Setup Page-- --General Setup Page--

Wide Tv Display

Logo Type Def

Go To General Setup Page Set TV Display mode

Go To General Setup Page Set Angle Mark


English

Set OSD Language

Logo Type Def

Angle Mark On

Osd Lang Eng Spdif Output

Screen Saver On

PortugueseSpanish

04

20

DVD/VCD/MP4

ANGLE 1 ANGLE 2 ANGLE 3......

Changing the viewing angle (Multi-angle)

With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, youcan press ANGLEto switch among vie-wing angles during playback.



the

* This function only operates with DVDs featuring multi-angle recordings.* The mark on a DVD's package indicates it features multi-angle scenes. The number in the mark indicates the number of angles from which scenes were shot.* It is invalid to pressing ANGLE during fast forward/fast reverse or pause.

3

7

Notes:

3

Selecting Channel

During VCD status, repeatedly press AUDIO button to select the following channel:

6

Stereo Mono Left

Mono Right

Selecting the corresponding channel to setthe different sound characters.

This function is operated by using the remote

control only.

Note:

*

Program Playing

During VCD mode, press PROG, the TFT displays the program menu. Press NUMBER BUTTONS to select the trackNumber and then press to move the cursorto START, press ENTER to start program playing; move the cursor to EXIT and pressENTER to exit the program playing. Movethe cursor to and press ENTER to the previous page; move the cursor to and press ENTER to the next page.During this process, press to cancel the program playing.

13

18


Note:

*

27


*

Playing PBC (Menu)

During VCD status, firstpress TITLE, PBC playback starts and the menu of entire disc appears on the monitor, and then you can select your favorite track by using Number Buttons. When a track is playing, you can to return to

if you would like to end the track and select others. To cancel PBC playing, press button again.

press MENU the menu

TITLE

4

23

3

This function is operated by using the remote

control.

Note:

*

PBC playing confirms to version 2.0 of VCD

and SVCD disc only.

3

04

21

DVD/VCD/MP4

Selecting MENU

Selecting Menu: During DVD status, press MENU to return to the root menu, all of the chapters will appear on monitor. You can press or button to select your desired chapter.

4

27 23

Selecting Title: During DVD status, press TITLE to return the title menu, all of the titles will appear on monitor. You also can press or button to select your desired chapter.

3

1

2

Under DVD menu, touch the screen to select

items.

Note:

*

27 23 27

Press SETUP on remote control or MENU on the main unit or in the monitor, main menu and sub-menu will appear on TFT,pressing [ ][ ][ ][ ] on the remote control to select your desired items, then press ENTER.

* The selections are the preferred options that will be chosen if they are available on a disc. If the disc that is inserted does not have the preferred option then the discs own preference will be used. * Regarding SETUP MENU, please refer to the following pages for more details.

* Some functions varies depending on the types of models or formats of the disc.

DVD SETUP MENU

Notes:

Press to the pervious one, press SETUP or press [ ][ ][ ][ ] to move the cursoron , then press ENTER to exit the menu setup.

* To touch the screen to select menu, touch it again to select the item.

If the touch menu options invalid or the disc

does not support touch-TITLE, that is the

same as bottons on the remote control will

display on the screen. Press to left, press

to right, press to up, press to down

and press to ENTER.

*

27

english manual for duster

Documents