engr reg form 1a
TRANSCRIPT
-
Application Form for Registered Engineer
Check List of Documents to Be Attached By the Applicant with the Application Form
Attested Copies of: Tick()
1 HSSC Pre-Engineering/Pre-Medical with Additional Maths /DAE/A-Level with
equivalence certificate from IBCC
2 Engineering Degree / Provisional Certificate
To whom it may concern certificate is not acceptable
3 Transcripts/Detailed Marks Certificate
4 Copy of CNIC
5 Three Passport size photographs with blue background
6 Copy of Passport showing the date of exit and arrival (For foreign degree holders only)
7 Copy of certificate of credit transfer from one university to another university along with
detailed marks certificate/registration certificate (If applicable)
-
PEC-1
Pakistan Engineering Council Ataturk Avenue (East) G-5/2, P.O.Box No.1296, Islamabad.
UAN:111-111-732, Fax: 051-2276224
E-mail: [email protected]
APPLICATION FOR REGISTRATION As Registered Engineer
The Registrar
Pakistan Engineering Council
Islamabad.
Dear Sir,
I request that my name may be registered on the Register of Pakistan Engineering Council as Registered Engineer under the Pakistan Engineering Council Act 1976 with following particulars and qualifications so that I may be furnished with a Certificate of Registration:
1. Name of Applicant (As per degree)
2. Fathers/Husband Name (As per degree)
Day Month Year
3. Date of Birth
4. CNIC Number
5. Permanent Address
5.1 Present Postal Address
5.2 Office Address
5.3 Mobile Number
5.4 Telephone Office 5.5.Residence#.
5.6 E-Mail 5.7.Fax Number
---- ----
__ __
--
Passport size
Photograph with
blue back ground
(Paste here)
________________________________________________________
________________________________________________________
Tehsil: _____________________ District:______________________
________________________________________________________
________________________________________________________
Tehsil: _____________________ District:______________________
________________________________________________________
________________________________________________________
-
6. Nationality District of Domicile Religion
10. Employment Status
Government Semi Government Private Unemployed
Name of the Organization /Department
11. I certify that the above particulars mentioned by me are correct. I undertake to inform the Registrar, Pakistan Engineering Council, of any change in my postal address and profession. I
also undertake to abide by the PEC Act, Bye-Laws, relevant rules and Codes of Ethics and
Conduct, prescribed for the members of the Council.
Yours Faithfully,
Signature of Applicant
Dated: _________________ Name of Applicant: _____________________________
______________________________________________________________________________
Attested By:
Engr. Designation: ..
PEC Registration No: ..... Mobile #: ......
Signature: ...... Dated: ..
7. Qualifications: Name of College/ University
Year of Passing
%age /CGPA
Discipline along with Specialization
7.1 F.Sc Pre-Engg /ICS/DAE/
A-Level
7.2 B.E./B.Sc. Engg. Degree or
Equivalent
Qualifications: Name of Institute/ College/ University
Year of Passing
Discipline along with Specialization
8. Postgraduate Engg. Qualifications.
9. Professional affiliations with
status
-
(FOR OFFICE USE ONLY)
1. Finance Department
Prescribed Fee of Rs.. has been received and credited vide.
Bank Challan No. .. Dated .
Bank Draft No... Dated .
(Accounts Clerk) Accounts Officer Finance Manager
(PEC Branch )
2. Registration Department Mr/Ms _____________________________________ passed/obtained engineering qualification from the university/institution/college as mentioned below:-
Sr.No Name of qualification and discipline
Name of
Institute/College/University
Discipline Year of
Graduation
2.1 B.E/B.Sc Engineering or Equivalent
2.2 Postgraduate Qualifications
2.3 Professional affiliations with status
5. Recommendation of PEC Secretariat:
_____________________________________________________________________________________
6. Decision of Enrolment Committee:
Chairman
7. Registration No Allotted: ______________________________ Enrolment Committee
8. Certificate Issued at Sr.#
9. Registration valid upto: 31/12/20 __ __ Registrar
3. Result Notification No with date
4. Accreditation Status
-
PEC Registration No
Date of Registration
Form PEC-2
INDEX CARD OF THE APPLICANT PAKISTAN ENGINEERING COUNCIL
(For Official Use only) Name of applicant
(As per degree)
Fathers/Husband
Name
(As per degree)
Day Month Year
Date of Birth
CNIC Number
Mobile Number
Sex District of Domicile
Email
Current
Employment
Qualification
Three Specimen Signatures of the Applicant:
(1) (2) (3)
Attested by Engr. PEC Registration No: .
Designation: ................... Mobile #: ....
Signature: ........... Registrar Dated: .. Pakistan Engineering Council
---- ----
__ __
--
Male Female
B.E/B.Sc or Equivalent Name of University/Institution Year of Graduation
Paste here One
Passport size
Photo graph
with blue
background
-
Instructions
The registration form shall be filled in capital letters by the applicant in his own handwriting
with neat, legible hand or typed. Forms of graduates of Pakistani Engineering
universities/Colleges shall be attested by *any PEC Member or Principal /
Dean/HOD/Registrar and will be submitted to the Registrar, Pakistan Engineering Council,
Ataturk Avenue (East) G-5/2, P.O.Box No.1296, Islamabad along with the documents
described under in any Liaison /Branch or Head Office. In case of an Engineering graduate
from foreign university / institute, the form shall be attested by a Professional Engineer of
grade 18 or above, or by a senior engineer who is registered Professional / Consulting
Engineer.
Photo copies of CNIC, HSSC, Engineering degree and its transcripts duly attested by *any
one of the above mentioned persons. In case, the degree has not been issued, duly attested
photo copy of Provisional Certificate issued by the concerned university will be accepted
initially for registration. But, the applicant will have to submit copy of degree within one
year from the date of registration.
Three passport size photographs with blue background, duly attested on the back side by
*any one of the above mentioned persons.
Index Card be filled by applicant with three specimen signatures in the space provided and
attested by *any one of the above mentioned persons.
Registration Fee can be deposited in PEC HQ, Islamabad or any PEC Branch/Liaison Office
alongwith Bank draft, Pay order in favour of Pakistan Engineering Council as per following
rates:
(i) Registration of fresh graduates from Pakistani universities = Rs 1,000/-
(including Rs 400 as processing fee and Rs 200/year for next three years
including current year)
(ii) Such graduates who could not obtain PEC registration would be charged fee with
penalty of Rs 200/- per year from year of graduation in addition to fee
mentioned in part (i)
(iii) Registration of fresh graduates from Foreign Universities =Rs 5,000/-(including
Rs.4,400 as processing fee and Rs.200/year for next three years including
current year)
(iv) A Registered Engineer shall obtain subsequent renewal within six months of its
expiry on payment of Rs.500/year, failing which a penalty of Rs.500/year
shall be imposed
(v) A Registered Engineer has to obtain a minimum of five years practical
experience in relevant field of engineering from a recognized engineering
organization or institution or service and earn requisite credit points to
become eligible for Engineering Practice Examination (EPE).
(vi) A Registered Engineer(RE) will has to pass Engineering Practice
Examination(EPE) to get a prestigious title of Professional Engineer(PE)
-
Reference: Professional development of engineers byelaws 2008
Note: Fee can also be deposited through on-line account No 700006-0 at MCB
Corporate Branch (code 1134), Blue Area Islamabad. However, acknowledgement
receipt must be attached with the application form.