entry codes entry codes
TRANSCRIPT
aqa.org.uk
Copyright © AQA and its licensors. All rights reserved. AQA Education (AQA) is a registered charity (registered charity number 1073334) and a company limited by guarantee registered in England and Wales (company number 3644723). Registered address: AQA, Devas Street, Manchester M15 6EX.
November 2018 G02018a
Entry codes 2018/19All exam series
This document lists the entry codes for all series in the 2018/19 academic year. Any updates will be posted on the Exams administration/Entries page of our website aqa.org.uk
Issued November 2018 v1.1
Entry codes 2018/19
Entry codes 2018/19
3
Contents
1 General information 4 Series 4 Entry codes 4
2 Restrictions on entry in 2018/19 5 Unique Learner Numbers (ULNs) 5 Discount (classification) codes 5 Prohibited combinations 6 Private candidates 6 Restricted pilot specifications 6
3 Changes to exams 7 A-level reform 7 GCSE reform 7 Availability of reform qualifications within Wales 8 Availability of reform qualifications within Northern Ireland 8 Availability of outgoing GCSE, AS and A-level qualifications 8 GCSE exams in 2018/19 8
4 Explanatory notes on the entry code tables 9 Example entry code table 9 Key to symbols 11
5 Entry code tables 13 AQA Baccalaureate 14 AQA Certificate (all levels, including Applied General) 15 AQA Level 1/2 Award 19 ELC (Entry Level Certificate) 24 FCSE (Foundation Certificate of Secondary Education) 26 FSMQ Pilot 28 Functional Skills 29 GCE 32
GCE Use of Mathematics Pilot 103 GCSE 105 Project 137 Tech-level 138 Technical Award 154
6 Index to entry codes 155
Entry codes 2018/19
4
1 General information This document lists the unit and subject award entry codes for all series in the academic year 2018/19. Further information about making entries is available from the Exams administration | Entries page of our website aqa.org.uk Series All entries for our examinations are collected by series, irrespective of the method of entry you use to submit them. The closing date for the receipt of entries and the date of publication of results for particular examinations determine each series. A copy of the Exam series guide 2018/19 in A3 format was sent to your centre in September 2018. It is also available from the Exams administration | Entries page of our website aqa.org.uk Entry codes Section 5 contains all the entry codes for all the exams (subject awards, options, units and components) that are available in any given series. You must use the appropriate entry code irrespective of your method of entry. Basedata (containing information on the specifications, units, options and components) will also be provided for each series for centres wishing to submit entries by EDI. A separate entry, using the appropriate entry code, is required for every assessment (subject award, unit or option) for which a result is to be reported. Before making an entry for a particular subject, you should refer to:
• the specification for the subject • any changes to examination provision detailed in the appropriate specification • any restrictions on entry detailed in Section 2 of this document.
Please see the Exams administration | Entries | Entries for exams officers page of our website aqa.org.uk for full details on basedata and submitting entries.
Entry codes 2018/19
5
2 Restrictions on entry in 2018/19 Unique Learner Numbers (ULNs) From January 2014, all students entered for an exam at a state funded school/college in England need a ULN. The ULN is a 10-digit number used to access the Personal Learning Record (PLR) of anyone over the age of 14 involved in education or training. The PLR is an online, lifelong record of individuals' achievements which they can share with other parties (for example employers, colleges, universities). Before entering students, you need to get valid ULNs for them that match the details held in the Learning Records Service (LRS). We can't access LRS to amend errors so if there are mismatches, we will return the invalid data to you, via e-AQA, for you to resolve with LRS. Where the ULN is mandatory we will not process entries if the ULN is not present. However, if the supplied ULN returns as a mismatch from LRS we will report this. We will still issue student results as normal but will be unable to upload these to the PLR. ULNs will not replace UCI numbers (Unique Candidate Identifier) so please ensure you include them in your entries submissions. Discount (classification) codes Discounting guidance can be found on the Department for Education (DfE) websites
• Discounting guidance page of the GOV.UK website • QAN website https://collectdata.education.gov.uk/qwsweb The Department for Education (DfE) assign each specification a national discount code (sometimes referred to as a classification code) on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Some awards (for example GCE Advanced Subsidiary (AS) awards) have two discount codes, as they are grouped differently for key stage 4 (pre-16) and key stage 5 (post-16) discounting purposes1. An early entry rule for key stage 4 (KS4) qualifications was introduced following the Secretary of State announcement that, from 29 September 2013, only a pupil’s first entry to a KS4 qualification counts towards their school’s performance measures. The early entry rule applies even where qualifications are taken with one exam board and then re-taken with another. Although the new rule does not prevent schools from entering pupils for examinations before the end of key stage 4, it aims to focus attention on whether pupils have been sufficiently prepared to achieve the very best possible outcome in that subject. Pupils can sit an examination more than once but it will be their first certificated grade in that subject that will be used for performance measures. You may wish to advise your candidates that, if they take two specifications with the same discount code, schools, colleges, universities and employers are very likely to take the view that they have achieved only one of the two specifications. The same view may be taken if candidates take two specifications that have different discount codes but have significant overlap of contents. Candidates who have any doubts about their subject combinations should check with the institution to which they wish to progress or company they wish to join, before embarking on their programmes. Discount codes are shown in the tables in Section 5.
1 The JCQ basedata formats only allows for one discount code in basedata. From 2017/18 onwards our basedata includes: • Key Stage 4 codes for all Level 1, 2 and 1/2 awards (eg GCSEs), where the DfE have published a KS4 code • Key Stage 5 (post-16) codes for all Level 3 awards (eg AS and A-level), and for any other award that hasn’t been
assigned a Key Stage 4 code.
Entry codes 2018/19
6
Prohibited combinations Before making an entry for a particular subject, you should refer to any statement in the specification that deals with prohibited combinations of units and specifications, in addition to any restrictions of specifications within the same discount code. Candidates entered for prohibited combinations of subjects will be reported on the Centre Entry Query Report. You will be required to cancel or amend the entry. You must inform us of these decisions by EDI or e-AQA. Private candidates A private candidate is someone who enters for exams through an AQA-approved school or college but is not enrolled as a candidate there. Private candidates may be self-taught, home-schooled or have private tuition with a tutor or through a distance learning organisation. Candidates can only become a private candidate in the UK. Exams are not available for private candidates to sit outside the UK. Not all specifications are available to private candidates and those with internally-assessed units may have restrictions. Further information can be found on the private candidates page of our website aqa.org.uk/private Restricted pilot specifications Specifications offered as part of a restricted pilot have been included in this booklet. Most pilot schemes have the maximum number of candidates and centres that can participate determined by the regulator. Centres will normally be invited to take part in the pilot scheme. If you require any information on any of the restricted pilot specifications, please contact the appropriate subject team.
Entry codes 2018/19
7
3 Changes to exams A-level reform Some A-levels have been reformed for first teaching in September 2015 (see table below) with the first assessment of AS in June 2016, and the first assessment of full A-level in June 2017. Phase two and three subjects have followed, for first teaching in September 2016 and September 2017 respectively. Changes to AS levels
• AS levels will be standalone qualifications and will no longer contribute to A-levels • New AS levels have been designed to offer breadth to the curriculum and will broadly remain at their current
standard • In some subjects, it may be appropriate for the AS to be designed to be co-taught with the first year of the
A-level
Phase one subjects (first teaching September 2015)
Phase two subjects (first teaching September 2016)
Phase three subjects (first teaching September 2017)
Phase 3b subjects (first teaching September 2018)
Art and Design Business Computer Science Economics English Language English Literature English Language and Literature History Psychology Sciences (Biology, Chemistry, Physics) Sociology
Dance Drama and Theatre Studies French Geography German Music Physical Education Religious Studies Spanish
Accounting Design and Technology Environmental Science Law Maths subjects (Maths, Further Maths) Media Studies Philosophy Politics
Bengali Biblical Hebrew Modern Hebrew Panjabi Polish
GCSE reform English Language, English Literature and Maths have been reformed for first teaching in September 2015 with the first assessment in June 2017. Phase two and three subjects have followed (see table below) for first teaching in September 2016 and September 2017 respectively. There will no longer be GCSE English (which was available for the final time in June 2017).
Phase two subjects (first teaching September 2016) Phase three subjects (first teaching September 2017)
Art and Design Sciences (Biology, Chemistry, Physics, Double Science) Citizenship Studies Computer Science Dance Drama Food Preparation and Nutrition Modern Foreign Languages (French, German, Spanish) Geography History Music Physical Education Religious Studies
Business Design and Technology Economics Engineering Media Studies Modern Foreign Languages (Bengali, Chinese, Italian, Modern Hebrew, Polish, Punjabi, Urdu) Psychology Sociology Statistics
Entry codes 2018/19
8
Availability of reform qualifications within Wales We are offering all our new GCSE, AS and A-level qualifications in Wales. Of these, only ‘designated’ qualifications recognised by Qualifications Wales will be eligible for state funding. Details of which qualifications attract state funding can be found on the Qualifications Wales website. Availability of reform qualifications within Northern Ireland Schools and colleges in Northern Ireland can offer all of our GCSE, AS and A-level qualifications as long as they meet any subject-specific requirements, even if the qualification was specifically designed for England. The only AQA specifications that schools in Northern Ireland cannot offer are:
• AS Biology (7401) & A-level Biology (7402), AS Chemistry (7404) & A-level Chemistry (7405), and AS Physics (7407) & A-level Physics (7408) as these awards don’t have a mark for assessing practical skills that contribute to the overall grade.
• GCSE English Language (8700), as it doesn’t have a mark for speaking and listening that contributes to the overall grade.
GCSE Biology (8461), Chemistry (8462), Physics (8463), Combined Science: Synergy (8465) and Combined Science: Trilogy (8464) were made available in Northern Ireland for first teaching in September 2017. The first examinations for pupils in Northern Ireland will be in June 2019. Availability of outgoing GCSE, AS and A-level qualifications It is expected that schools will offer reformed GCSE, AS and A-level qualifications wherever they have been introduced. Information about re-sit opportunities for the equivalent outgoing specifications is available from Ofqual’s website. GCSE exams in 2018/19 In December 2011 Ofqual announced that all GCSEs taken in June 2014 and after will be linear in structure. All candidates will be required to take all GCSE assessments at the end of the course with the following exceptions:
• For most GCSEs, a candidate who has previously certificated and is satisfied with the result(s) awarded for the non-exam assessment (NEA) unit(s) may be able to carry forward the result(s) for the NEA.
This change to specifications, including information on carrying forward NEAs, is detailed in the information in Section 5 for each specification.
Entry codes 2018/19
9
4 Explanatory notes on the entry code tables This document lists the unit, option and subject award entry codes for all series in the academic year 2018/19.
• Subjects are grouped by qualification (GCE, GCSE etc) • In each section, subjects are in alphabetical order by specification
Example entry code table (please note that this specification is no longer available and is included here for illustrative purposes only)
8a 8b 1 2 3 4 5 7
6
9
10
Entry codes 2018/19
10
Each table contains the following information
① Details of the specification including
• Specification title
• Qualification Including Full Course, Double Award and so on as appropriate. Where they differ, e-AQA qualification codes are shown in brackets (for example (IG) or (AQAC))
• Specification code not to be confused with the Entry Code – see ②
• Basedata group code this is the code under which all entry codes for a specification can be found in the electronic basedata files (see the Exams administration | Entries | Entries for exams officers | EDI and basedata page of our website aqa.org.uk for details)
• Discount code See page 5. Also known as a classification code KS4 Key Stage 4 discount code KS5 Key Stage 5 discount code
• Qualification number
• Attainment 8 measure(s) English, Maths, EBacc or Other. See the DfE website for more information about Attainment 8 and Progress 8.
② Each entry for a subject award, unit or option should be recorded by means of an Entry Code. A separate entry, using the appropriate entry code, is required for every assessment (subject award, unit or option) for which a result is to be reported. It is essential that you make entries using only these entry codes.
③ The series in which a particular examination is available and the closing date for entries for that series. The tables show only those series in which entries for the specification are collected.
④ For most specifications, the weighting of each unit towards the overall award.
• AS GCE Advanced Subsidiary • AS sgl GCE Advanced Subsidiary Single Award • AS dbl GCE Advanced Subsidiary Double Award • ADV GCE Advanced • ADV sgl GCE Advanced Single Award • ADV+AS GCE Advanced with Advanced Subsidiary (additional) award • ADV dbl GCE Advanced Double Award • Short GCSE Short Course • Full GCSE Full Course • Sgl GCSE Single Award • Dbl GCSE Double Award
⑤ Where applicable, the maximum uniform mark (UMS).
⑥ Description of the units or options within a specification for which an entry can be made.
⑦ Information is shown where multiple components make up the unit or option. Note that no component information is shown where a unit consists of just a single component.
⑧ See Key to Symbols on page 11.
⑨ For modular specifications, entry details for the overall subject award together with information of the valid combinations of units which must be taken to give a subject award.
Entry codes 2018/19
11
⑩ Information about the specification, units or options including details of the following:
information that is relevant to entries any changes to specifications or other important information any specifications that share a discount code with another specification assess a common subject area and should be seen as alternative specifications. See page 5 for full details any prohibited combinations, in addition to restrictions within discount codes information relating to conditions that apply to the entry of private candidates
Key to symbols The following symbols may be used in the entry tables:
Indicates components/elements for which marks may be carried forward from a previous exam series.
For the lifetime of the specification there is no limit on the number of occasions on which the marks can be re-used or on the period of time since the original result. However, other restrictions may apply (please see the information under the entry code table for the specification).
Refer to the information for the specification
Refer to the information for the specification
Refer to the information for the specification
Indicates specifications, units or components for which teachers and/or candidates need to have preliminary material or early papers before the main exam period Where early material applies to the specification as a whole the symbol is shown with the specification details (see 8a in the example on page 9) otherwise it is shown against the relevant unit or component (see 8b in the example on page 9) If your centre is entering candidates for any of these specifications, you will find full details of the source and availability of preliminary material in the Specification and in the Early Question Papers and Preliminary Material booklet, which is available from the Exams administration | Exams guidance | Exams materials page of our website aqa.org.uk
* ** †
Entry codes 2018/19 - AQA Baccalaureate
14
AQA Baccalaureate Restricted entry (ABQ) (ABQE)
Series availability
Specification code Basedata group code
9000 9000
Qualification number Discount code Attainment 8 measure(s)
500/3777/8 BAC n/a
Entry code June 2019
6A19 21/2/19
Overall AQA Baccalaureate 9000
Enrichment scheme 9001
The e-AQA qualification code for the overall AQA Baccalaureate is ABQ. The qualification code for the Enrichment element is ABQE.
This is a restricted specification and, as such, centres need to be approved to take part. Further information, including details of registration for the AQA Baccalaureate, can be found on our website at aqa.org.uk/bacc
When making entries, please enter each candidate for both 9000 and 9001.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)
15
Applied Business Level 3 Certificate (Applied General)
Series availability
Weighting %
Specification code Basedata group code
1830 1830
Discount code:
Attainment 8 measure(s):
KS5 0002 Other
Entry code
Jan 2019 1A19
21/10/18
June 2019 6A19
21/2/19 Cer
tific
ate
Exte
nded
C
ertif
icat
e
Qualification numbers:
Certificate: 601/7145/5 Extended Certificate: 601/7146/7
Cer
tific
ate Unit 1 Financial planning and analysis External exam ABS1 33⅓ 16⅔
Unit 2 Business dynamics Centre assessed ABS2 33⅓ 16⅔
Unit 3 Entrepreneurial opportunities (synoptic assessment) Externally assessed ABS3 33⅓ 16⅔
Exte
nded
Cer
tific
ate Unit 4 Managing and leading people External exam ABS4 - 16⅔
Unit 5 Developing a business proposal (synoptic assessment) Centre assessed ABS5 - 16⅔
Unit 6 e-Business implementation Centre assessed ABS6 - 16⅔
Unit 7 Managing an event Centre assessed ABS7 - 16⅔
Unit 8 Marketing communications Centre assessed ABS8 - 16⅔
Certificate in Applied Business Award ABS1 + ABS2 + ABS3 1831 - -
Extended Certificate in Applied ABS1 + ABS2 + ABS3 + ABS4 Business Award + ABS5 + ABS6 or ABS7 or ABS8
1832 - -
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1831, 1832 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)
16
Applied Science new spec Level 3 Certificate (Applied General)
Series availability
Weighting %
Specification code Basedata group code
1775 1775
Discount code:
Attainment 8 measure(s):
KS5 RA14 Other
Entry code
Jan 2019 1A19
21/10/18
June 2019 6A19
21/2/19 Cer
tific
ate
Exte
nded
C
ertif
icat
e
Qualification numbers:
Certificate: 601/7104/2 Extended Certificate: 601/7105/4
Cer
tific
ate Unit 1 Key concepts in science External exam ASC1 33⅓ 16⅔
Unit 2 Applied experimental techniques Centre assessed ASC2 33⅓ 16⅔
Unit 3 Science in the modern world External exam ASC3 33⅓ 16⅔
Exte
nded
Cer
tific
ate Unit 4 The human body External exam ASC4 - 16⅔
Unit 5 Investigating science Centre assessed ASC5 - 16⅔
Unit 6
6A Microbiology Centre assessed ASC6A - 16⅔
6B Medical physics Centre assessed ASC6B - 16⅔
6C Organic chemistry Centre assessed ASC6C - 16⅔
Certificate in Applied Science Award ASC1 + ASC2 + ASC3 1776 - -
Extended Certificate in Applied ASC1 + ASC2 + ASC3 + ASC4 Science Award + ASC5 + ASC6A or ASC6B or ASC6C
1777 - -
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1776, 1777 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)
17
Further Mathematics outgoing spec Level 2 (IG)
Series availability
Weighting %
Specification code Basedata group code
8360 8360
Qualification number Discount code Attainment 8 measure(s)
600/2123/8 RB1B Maths, Other
Entry code
June 2019 6G19
21/2/19
Further Mathematics (Level 2) 8360/1 Written paper 1 (non-calculator) 8360/2 Written paper 2 (calculator) 8360 40
60
This specification will be withdrawn after June 2019.
A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Mathematical Studies Level 3 (L3)
Series availability
Weighting %
Max mark
Specification code Basedata group code
1350 1350
Qualification number Discount code Attainment 8 measure(s)
601/4945/0 2350 n/a
Entry code
June 2019 6A19
21/2/19
raw
Option A - Statistical techniques Paper 1 1350/1
1350A 50 60
Paper 2A 1350/2A 50 60
Option B - Critical path and risk analysis Paper 1 1350/1
1350B 50 60
Paper 2B 1350/2B 50 60
Option C - Graphical techniques Paper 1 1350/1
1350C 50 60
Paper 2C 1350/2C 50 60
Candidates may enter for only one of the three options per series. A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - AQA Certificate (all levels, including Applied General)
18
Personal and Social Education Award and Certificate
Specification code Basedata group code Discount code Attainment 8 measure(s)
5800 n/a HB1 n/a
Qualification numbers: Entry Level 1 Award Entry Level 1 Certificate Entry Level 2 Award Entry Level 2 Certificate Entry Level 3 Award Entry Level 3 Certificate
500/8146/9 500/8143/3 500/8120/2 500/8119/6 500/8122/6 500/8121/4
Level 1 Award Level 1 Certificate Level 2 Award Level 2 Certificate
500/3050/4 500/9966/8 500/8183/4 500/8184/6
All entries for the Personal and Social Education qualifications listed above must be made through the AQA Gateway web-portal. Centres need only make one entry under the specification Personal and Social Education (5800) each series.
During 2018/19 all Personal and Social Education qualifications will be available during three series: Autumn 2018, Spring 2019 and Summer 2019.
The entry window will be made available as per the scheduled dates in the Administrative Procedures and an e-mail will be sent to all centres that have submitted estimated entries for these qualifications.
Further information and a link to the web-portal can be found in the Administrative procedures 2018/19 document available from our website at aqa.org.uk/pse
Preparation for Working Life outgoing spec Short Course - Level 1 and Level 2 (L1L2)
Series availability
Weighting %
Specification code Basedata group code
4800 4800
Qualification number: Level 1 Level 2 Discount code Attainment 8 measure(s)
100/2292/2 100/2293/4 HC42 n/a
Entry code
June 2019 6G19
21/2/19
Preparation for Working Life 4800/W Written paper 4800/C Coursework 4800 80
20
This specification will be withdrawn after June 2019.
This specification is equivalent to a GCSE Short Course. A single entry is all that is needed for the examination paper, coursework entry and certification.
This specification is available to private candidates.
Preparation for Working Life outgoing spec Level 1/2 (AQAC)
Series availability
Weighting %
Specification code Basedata group code
4801 4801
Qualification number Discount code Attainment 8 measure(s)
600/7049/3 HC42 n/a
Entry code
June 2019 6G19
21/2/19
Preparation for Working Life 4801/1 Calculator 4801/2 Non-calculator 4801 70
30
This specification will be withdrawn after June 2019.
A single entry is all that is needed for both examination papers and certification.
This specification is available to private candidates.
Entry codes 2018/19 - AQA Level 1/2 Award
19
Children’s Learning and Development outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3715 3715 603/0504/6 n/a
Discount code: PT21 Entry code
June 2019 6G19
21/2/19
Unit 1 Research Study Internally assessed CLD1 30 90
Unit 2 Child Study Internally assessed CLD2 30 90
Unit 3 Development of the child from pre-conception to 10 years Written exam CLD3 40 120
Subject award 3716 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Fashion and Textiles outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3720 3720 603/0516/2 n/a
Discount code: JK1 Entry code
June 2019 6G19
21/2/19
Unit 1 Skills demonstration Internally assessed FNT1 30 90
Unit 2 Extended making project Internally assessed FNT2 30 90
Unit 3 Fundamentals of fashion and textiles Written exam FNT3 40 120
Subject award 3721 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Level 1/2 Award
20
Food and Catering outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3725 3725 603/0517/4 n/a
Discount code: NA1 Entry code
June 2019 6G19
21/2/19
Unit 1 Skills demonstration Internally assessed FDC1 30 90
Unit 2 Extended making project Internally assessed FDC2 30 90
Unit 3 Fundamentals of food and catering Written exam FDC3 40 120
Subject award 3726 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Health and Social Care outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3730 3730 603/0505/8 n/a
Discount code: PA1 Entry code
June 2019 6G19
21/2/19
Unit 1 Individual well-being in health and social care Internally assessed HLT1 30 90
Unit 2 Healthy living Internally assessed HLT2 30 90
Unit 3 Development through the life stages Written exam HLT3 40 120
Subject award 3731 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Level 1/2 Award
21
Information Technology outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3735 3735 603/0507/1 n/a
Discount code: CJ3 Entry code
June 2019 6G19
21/2/19
Unit 1 Practical skills in IT Internally assessed INF1 30 90
Unit 2 Creating IT systems Internally assessed INF2 30 90
Unit 3 Fundamentals of IT Written exam INF3 40 120
Subject award 3736 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Materials Technology outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3740 3740 603/0518/6 n/a
Discount code: YC4 Entry code
June 2019 6G19
21/2/19
Unit 1 Skills demonstration Internally assessed MAT1 30 90
Unit 2 Extended making project Internally assessed MAT2 30 90
Unit 3 Fundamentals of materials technology Written exam MAT3 40 120
Subject award 3741 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Level 1/2 Award
22
Sport outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3750 3750 603/0503/4 n/a
Discount code: MA1 Entry code
June 2019 6G19
21/2/19
Unit 1 Practical player performance Internally assessed SPT1 30 90
Unit 2 Coaching and officiating or organising Internally assessed SPT2 30 90
Unit 3 The sports industry Written exam SPT3 40 120
Subject award 3751 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
STEM outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3765 3765 603/1225/7 n/a
Discount code: RA1 Entry code
June 2019 6G19
21/2/19
Unit 1 STEM in industry – Research Task Internally assessed STM1 30 90
Unit 2 Creating a STEM product or service Internally assessed STM2 30 90
Unit 3 Fundamentals of STEM Written exam STM3 40 120
Subject award 3766 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - AQA Level 1/2 Award
23
Visual Communication outgoing spec Level 1/2 Award (AQAA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3755 3755 603/0519/8 n/a
Discount code: JC3 Entry code
June 2019 6G19
21/2/19
Unit 1 Skills demonstration Internally assessed VIS1 30 90
Unit 2 Extended making project Internally assessed VIS2 30 90
Unit 3 Fundamentals of visual communication Written exam VIS3 40 120
Subject award 3756 - 300
This specification will be withdrawn after June 2019.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required. The subject award will be available from the June 2019 exam series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - ELC
24
Step Up to English ELC
Series availability
Weight %
Max mark
Max mark
Specification code Basedata group code
5970 5970
Qualification number Discount code Attainment 8 measure(s)
601/5978/9 HD2 n/a
Entry code
Jan 2019 1A19
21/10/18
June 2019 6G19
21/2/19
raw scaled
Silver Step Silver step Literacy Topics 5972/1 Silver step Creative Reading and Writing 5972/2
NEA 5972 50 50
120 60
120 120
Gold Step Gold step Literacy Topics 5973/1 Gold step Creative Reading and Writing 5973/2
NEA 5973 50 50
120 60
120 120
Candidates may enter for only one of the two steps per series. A single entry is all that is needed for the non-exam assessments and certification.
Only one of the two NEA components for either step can be carried forward in the same exam series. The other component must be re-taken.
This specification is not available to private candidates.
Mathematics ELC
Series availability
Specification code Basedata group code
5930 5930
Qualification number Discount code Attainment 8 measure(s)
601/5874/8 HD4 n/a
Entry code
Jan 2019 1A19
21/10/18
June 2019 6G19
21/2/19
Mathematics Portfolio 5930
This specification is not available to private candidates.
Personal and Social Education Award and Certificate
Specification code 5800
See page 18.
Entry codes 2018/19 - ELC
25
Science ELC
Series availability
Specification code Basedata group code
5960 5960
Qualification number Discount code Attainment 8 measure(s)
601/7522/9 1310 n/a
Entry code June 2019
6G19 21/2/19
Single award Portfolio 5961
Double award Portfolio 5962
Candidates may enter for only one of the two qualifications (Single or Double award) per series.
This specification is not available to private candidates.
Step Up to English ELC See page 24
Entry codes 2018/19 - FCSE
26
Chinese (Mandarin) FCSE
Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course
8971 8972 8973 8971 8972 8973
Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)
603/2114/3 603/2109/X 603/2110/6 5950 5950 5950 n/a
Entry code
Series availability
June 2019
6G19 21/2/19
Chinese (Mandarin) Short Course in Spoken Language Portfolio 8971
Chinese (Mandarin) Short Course in Written Language Portfolio 8972
Chinese (Mandarin) Full Course Portfolio 8973
This specification is not available to private candidates.
French FCSE
Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course
8956 8957 8958 8956 8957 8958
Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)
603/2121/0 603/2122/2 603/2120/9 5650 5650 5650 n/a
Entry code
Series availability
June 2019
6G19 21/2/19
French Short Course in Spoken Language Portfolio 8956
French Short Course in Written Language Portfolio 8957
French Full Course Portfolio 8958
This specification is not available to private candidates.
Entry codes 2018/19 - FCSE
27
German FCSE
Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course
8966 8967 8968 8966 8967 8968
Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)
603/2312/7 603/2126/X 603/2125/8 5670 5670 5670 n/a
Entry code
Series availability
June 2019
6G19 21/2/19
German Short Course in Spoken Language Portfolio 8966
German Short Course in Written Language Portfolio 8967
German Full Course Portfolio 8968
This specification is not available to private candidates.
Spanish FCSE
Specification codes: Short Course Spoken Short Course Written Full Course Basedata group codes: Short Course Spoken Short Course Written Full Course
8996 8997 8998 8996 8997 8998
Qualification numbers: Short Course Spoken Short Course Written Full Course Discount codes Short Course Spoken Short Course Written Full Course Attainment 8 measure(s)
603/2129/5 603/2128/3 603/2127/1 5750 5750 5750 n/a
Entry code
Series availability
June 2019
6G19 21/2/19
Spanish Short Course in Spoken Language Portfolio 8996
Spanish Short Course in Written Language Portfolio 8997
Spanish Full Course Portfolio 8998
This specification is not available to private candidates.
Entry codes 2018/19 - FSMQ Pilot
28
Free-Standing Mathematics Qualifications Advanced level (FSM) Final re-sit opportunity
Series availability
Maximum UMS
Specification codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus Qualification numbers: Data Analysis Hypothesis Testing Dynamics Personal Finance Decision Maths Calculus
9993 9994 9995 9996 9997 9998 100/6449/7 500/4006/6 500/4090/X 500/4092/3 500/4007/8 500/4008/X
Basedata group codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus Discount codes: Data Analysis KS4 Data Analysis KS5 Hypothesis Testing KS4 Hypothesis Testing KS5 Dynamics KS4 Dynamics KS5 Personal Finance KS4 Personal Finance KS5 Decision Maths KS4 Decision Maths KS5 Calculus KS4 Calculus KS5 Attainment 8 measure(s)
9993 9994 9995 9996 9997 9998 RB7F 2421 RB7I 2491 RB56 2441 RB7B 2381 RB6A 2490 RB55 2440 n/a
Entry code
June 2019 6A19
21/2/19
Advanced units
Data Analysis 9993 100
Hypothesis Testing 9994 100
Dynamics 9995 100
Mathematical Principles for Personal Finance 9996 100
Decision Mathematics 9997 100
Calculus 9998 100
These specifications are available as a final re-sit only opportunity.
This is a pilot specification and, as such, centres will be invited to take part with the maximum number of centres and candidates participating being determined by the regulator.
UMS marks are issued for each of these free-standing qualifications as they can be used towards the GCE in Use of Mathematics Pilot (see page 103).
These units are available to private candidates only at centres approved for the pilot.
Entry codes 2018/19 - Functional Skills
29
English Functional Skills Level 1 (FS)
Series availability
Specification code Basedata group code
4720 4720
Qualification number Discount code Attainment 8 measure(s)
500/8701/0 HD2 n/a
Entry code
Nov 2018 BG18
4/10/18
Jan 2019 1A19
21/10/18
March 2019 3G19
21/1/19
June 2019 6A19
21/2/19
Reading Paper based 47201
On-screen 47201S
Writing Paper based 47202
On-screen 47202S
Speaking, listening and communication Controlled assessment 47203
Subject award 47201 or 47201S + 47202 or 47202S + 47203 4721
Entry for the Reading, Writing and Speaking elements will not trigger certification. You will also need to make an entry for the overall Level 1 subject award (4721) if certification is required.
A different entry code is used to identify on-screen and paper based options: please ensure that the correct entry code is used.
The software required to run the test can be installed free of charge. Further information on the on-screen tests, including details of the minimum system requirements, can be found on our website at aqa.org.uk/ost
Concurrent entries for both the paper based and on-screen routes for the same element will not be accepted.
This specification is available to private candidates where
• because of the nature of the controlled assessment, candidates are attending an AQA centre that must supervise, authenticate and mark the controlled assessment
or
• if the candidate has already received a result for the controlled assessment unit, it can be used towards the award.
Entry codes 2018/19 - Functional Skills
30
English Functional Skills Level 2 (FS)
Series availability
Specification code Basedata group code
4725 4725
Qualification number Discount code Attainment 8 measure(s)
500/9126/8 HD2 n/a
Entry code
Nov 2018 BG18
4/10/18
Jan 2019 1A19
21/10/18
March 2019 3G19
21/1/19
June 2019 6A19
21/2/19
Reading Paper based 47251
On-screen 47251S
Writing Paper based 47252
On-screen 47252S
Speaking, listening and communication Controlled assessment 47253
Subject award 47251 or 47251S + 47252 or 47252S + 47253 4726
Entry for the Reading, Writing and Speaking elements will not trigger certification. You will also need to make an entry for the overall Level 2 subject award (4726) if certification is required.
A different entry code is used to identify on-screen and paper based options: please ensure that the correct entry code is used.
The software required to run the test can be installed free of charge. Further information on the on-screen tests, including details of the minimum system requirements, can be found on our website at aqa.org.uk/ost
Concurrent entries for both the paper based and on-screen routes for the same element will not be accepted.
This specification is available to private candidates where
• because of the nature of the controlled assessment, candidates are attending an AQA centre that must supervise, authenticate and mark the controlled assessment
or
• if the candidate has already received a result for the controlled assessment unit, it can be used towards the award.
Entry codes 2018/19 - Functional Skills
31
Mathematics Functional Skills Level 1 (FS)
Series availability
Specification code Basedata group code
4367 4367
Qualification number Discount code Attainment 8 measure(s)
500/8703/4 HD4 n/a
Entry code
Nov 2018 BG18
4/10/18
Jan 2019 1A19
21/10/18
March 2019 3G19
21/1/19
June 2019 6A19
21/2/19
Mathematics Level 1 4367
This specification is available to private candidates.
Mathematics Functional Skills Level 2 (FS)
Series availability
Specification code Basedata group code
4368 4368
Qualification number Discount code Attainment 8 measure(s)
500/8702/2 HD4 n/a
Entry code
Nov 2018 BG18
4/10/18
Jan 2019 1A19
21/10/18
March 2019 3G19
21/1/19
June 2019 6A19
21/2/19
Mathematics Level 2 4368
This specification is available to private candidates.
Entry codes 2018/19 - GCE
32
Accounting Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2120 2120 AS 500/2325/1 ADV 500/2329/9 n/a
Discount codes:
AS KS4 AK6 AS KS5 7410 ADV 7410 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Introduction to Financial Accounting ACCN1 50 25 100
Unit 2 Financial and Management Accounting ACCN2 50 25 100
A2 Unit 3 Further Aspects of Financial Accounting ACCN3 - 25 100
Unit 4 Further Aspects of Management Accounting ACCN4 - 25 100
AS subject award ACCN1 + ACCN2 1121 - - 200
ADV subject award ACCN1 + ACCN2 + ACCN3 + ACCN4 2121 - - 400
This specification is available as a final re-sit only opportunity.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Accounting new spec GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7126 ADV 7127 AS 603/0921/0 ADV 603/0920/9 n/a
Discount codes:
AS KS4 AK6 AS KS5 7410 ADV 7410 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 7126 7126 100 120
ADV Paper 1 Financial accounting 7127/1
7127 50 120
Paper 2 Accounting for analysis and decision-making 7127/2 50 120
A single entry is all that is needed for the examination paper(s) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
33
Anthropology Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2110 2110 AS 500/7690/5 ADV 500/7691/7 n/a
Discount codes:
AS KS4 EE23 AS KS5 4892 ADV 4892 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Being Human: Unity and Diversity ANTH1 50 25 100
Unit 2 Becoming a Person: Processes, Practices and Consequences ANTH2 50 25 100
A2 Unit 3 Global and Local: Societies, Environments and Globalisation ANTH3 - 25 100
Unit 4 Practising Anthropology: Methods and Investigations ANTH4 - 25 100
AS subject award ANTH1 + ANTH2 1111 - - 200
ADV subject award ANTH1 + ANTH2 + ANTH3 + ANTH4 2111 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1111, 2111 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
34
Archaeology Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2010 2010 AS 500/2252/0 ADV 500/2255/6 n/a
Discount codes: AS KS4 DC AS KS5 4730 ADV 4730 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 The Archaeology of Religion and Ritual ARCH1 40 20 80
Unit 2 Archaeological Skills and Methods ARCH2 60 30 120
A2 Unit 3 World Archaeology ARCH3 - 30 120
Unit 4 Archaeological Investigation Coursework ARCH4 - 20 80
AS subject award ARCH1 + ARCH2 1011 - - 200
ADV subject award ARCH1 + ARCH2 + ARCH3 + ARCH4 2011 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1011, 2011 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Private candidates wishing to submit coursework for assessment must make arrangements for their work to be authenticated. Details of their authentication arrangements must be submitted to us using a Private candidate coursework information form at the time their entry request is made. Please see our website aqa.org.uk/private for further details.
Candidates studying the coursework unit (ARCH4) are strongly advised to submit a Personal study outline form to ensure that the proposed topic of study lies within the bounds of the specification.
It is also strongly advised that the approval of the topic is obtained before the candidate embarks on any investigations.
Entry codes 2018/19 - GCE
35
Art and Design: Art, craft and design GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7241 ADV 7201 AS 601/4706/4 ADV 601/4456/7 n/a
Discount codes:
AS KS4 JA2 AS KS5 3510 ADV 3510 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Component 1 NEA - Portfolio 7241/C
7241 60 96 288
Component 2 NEA - Externally set assignment 7241/X 40 96 192
ADV Component 1 NEA - Personal investigation 7201/C
7201 60 96 288
Component 2 NEA - Externally set assignment 7201/X 40 96 192
A single entry is all that is needed for the non-exam assessments and certification.
For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
36
Art and Design: Fine art GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7242 ADV 7202 AS 601/4706/4 ADV 601/4456/7 n/a
Discount codes:
AS KS4 JA2 AS KS5 3690 ADV 3690 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Component 1 NEA - Portfolio 7242/C
7242 60 96 288
Component 2 NEA - Externally set assignment 7242/X 40 96 192
ADV Component 1 NEA - Personal investigation 7202/C
7202 60 96 288
Component 2 NEA - Externally set assignment 7202/X 40 96 192
A single entry is all that is needed for the non-exam assessments and certification.
For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
37
Art and Design: Graphic communication GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7243 ADV 7203 AS 601/4706/4 ADV 601/4456/7 n/a
Discount codes:
AS KS4 JA2 AS KS5 3550 ADV 3550 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Component 1 NEA - Portfolio 7243/C
7243 60 96 288
Component 2 NEA - Externally set assignment 7243/X 40 96 192
ADV Component 1 NEA - Personal investigation 7203/C
7203 60 96 288
Component 2 NEA - Externally set assignment 7203/X 40 96 192
A single entry is all that is needed for the non-exam assessments and certification.
For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
38
Art and Design: Photography GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7246 ADV 7206 AS 601/4706/4 ADV 601/4456/7 n/a
Discount codes:
AS KS4 KJ1 AS KS5 3570 ADV 3570 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Component 1 NEA – Portfolio 7246/C
7246 60 96 288
Component 2 NEA - Externally set assignment 7246/X 40 96 192
ADV Component 1 NEA - Personal investigation 7206/C
7206 60 96 288
Component 2 NEA - Externally set assignment 7206/X 40 96 192
A single entry is all that is needed for the non-exam assessments and certification.
For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
39
Art and Design: Textile design GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7244 ADV 7204 AS 601/4706/4 ADV 601/4456/7 n/a
Discount codes:
AS KS4 JA2 AS KS5 3650 ADV 3650 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Component 1 NEA - Portfolio 7244/C
7244 60 96 288
Component 2 NEA - Externally set assignment 7244/X 40 96 192
ADV Component 1 NEA - Personal investigation 7204/C
7204 60 96 288
Component 2 NEA - Externally set assignment 7204/X 40 96 192
A single entry is all that is needed for the non-exam assessments and certification.
For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
40
Art and Design: 3-D design GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7245 ADV 7205 AS 601/4706/4 ADV 601/4456/7 n/a
Discount codes:
AS KS4 JA2 AS KS5 3670 ADV 3670 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Component 1 NEA - Portfolio 7245/C
7245 60 96 288
Component 2 NEA - Externally set assignment 7245/X 40 96 192
ADV Component 1 NEA - Personal investigation 7205/C
7205 60 96 288
Component 2 NEA - Externally set assignment 7205/X 40 96 192
A single entry is all that is needed for the non-exam assessments and certification.
For each award (AS and A-level) only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
41
Bengali outgoing spec GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s) (AS only):
2635 2635 AS 500/2319/6 ADV 500/2336/6 EBacc, Other
Discount codes:
AS KS4 FKB AS KS5 5930 ADV 5930 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Reading and writing BENG1 100 50 100
A2 Unit 2 Reading and writing BENG2 - 50 100
AS subject award BENG1 1636 - - 100
ADV subject award BENG1 + BENG2 2636 - - 200
This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1636, 2636 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
42
Biology GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):
AS 7401 ADV 7402 AS 601/4624/2 ADV 601/4625/4 EBacc, Other
Discount codes:
AS KS4 RH3 AS KS5 1010 ADV 1010 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 7401/1
7401 50 75
Paper 2 7401/2 50 75
ADV
Paper 1 7402/1
7402
35 91
Paper 2 7402/2 35 91
Paper 3 7402/3 30 78
Practical skills endorsement 7402/C - -
These specifications are not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7.
A single entry is all that is needed for examination papers, endorsement entry (where applicable) and certification.
If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates. It is expected that students undertaking the AS will carry out at least the six required practical activities in section 7.2 of the specification, and private candidates should make arrangements to complete sufficient practical work to fulfil this expectation. 15% of the marks in the AS papers will relate to practical work.
The Advanced specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8.2 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCE
43
Business GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7131 ADV 7132 AS 601/4337/X ADV 601/4336/8 n/a
Discount codes:
AS KS4 AA3 AS KS5 3210 ADV 3210 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 Business 1 7131/1
7131 50 80
Paper 2 Business 2 7131/2 50 80
ADV
Paper 1 Business 1 7132/1
7132
33.3 100
Paper 2 Business 2 7132/2 33.3 100
Paper 3 Business 3 7132/3 33.3 100
A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
44
Chemistry GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):
AS 7404 ADV 7405 AS 601/5730/6 ADV 601/5731/8 Ebacc, Other
Discount codes:
AS KS4 RD1 AS KS5 1110 ADV 1110 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 7404/1
7404 50 80
Paper 2 7404/2 50 80
ADV
Paper 1 7405/1
7405
35 105
Paper 2 7405/2 35 105
Paper 3 7405/3 30 90
Practical skills endorsement 7405/C - -
These specifications are not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7.
A single entry is all that is needed for examination papers, endorsement entry (where applicable) and certification.
If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates. It is expected that students undertaking the AS will carry out at least the six required practical activities in section 7.2 of the specification, and private candidates should make arrangements to complete sufficient practical work to fulfil this expectation. 15% of the marks in the AS papers will relate to practical work.
The Advanced specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8.2 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCE
45
Citizenship Studies Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2100 2100 AS 500/2590/9 ADV 500/2586/7 n/a
Discount codes: AS KS4 EE31 AS KS5 4910 ADV 4910 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Identity, Rights and Responsibilities CIST1 40 20 80
Unit 2 Democracy, Active Citizenship and Participation CIST2 60 30 120
A2 Unit 3 Power and Justice CIST3 - 25 100
Unit 4 Global Issues and Making a Difference CIST4 - 25 100
AS subject award CIST1 + CIST2 1101 - - 200
ADV subject award CIST1 + CIST2 + CIST3 + CIST4 2101 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1101, 2101 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
46
Classical Civilisation Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2020 2020 AS 500/2225/8 ADV 500/2226/X n/a
Discount codes: AS KS4 DB2B AS KS5 6530 ADV 6530 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS
Unit 1
Option A: Greek Architecture and Sculpture CIV1A 50 25 100
Option B: Athenian Democracy CIV1B 50 25 100
Option C: Aristophanes and Athens CIV1C 50 25 100
Option D: Women in Athens and Rome CIV1D 50 25 100
Option E: Menander and Plautus CIV1E 50 25 100
Option F: The Life and Times of Cicero CIV1F 50 25 100
Unit 2
Option A: Homer lliad CIV2A 50 25 100
Option B: Homer Odyssey CIV2B 50 25 100
Option C: Athenian Vase Painting CIV2C 50 25 100
Option D: Athenian Imperialism CIV2D 50 25 100
Option E: Roman Architecture and Town Planning CIV2E 50 25 100
Option F: The Second Punic War CIV2F 50 25 100
A2
Unit 3
Option A: Mycenaean Civilisation CIV3A - 25 100
Option B: The Persian Wars CIV3B - 25 100
Option C: Greek Tragedy CIV3C - 25 100
Option D: Augustus and the Foundation of the Principate CIV3D - 25 100
Unit 4
Option A: Socrates and Athens CIV4A - 25 100
Option B: Alexander CIV4B - 25 100
Option C: Roman Epic CIV4C - 25 100
Option D: Tiberius and Claudius CIV4D - 25 100
AS subject award one from CIV1A–CIV1F + one from CIV2A–CIV2F
1021 - - 200
ADV subject award one from CIV1A–CIV1F + one from CIV2A–CIV2F + one from CIV3A–CIV3D + one from CIV4A–CIV4D
2021 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1021, 2021 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
47
Communication and Culture Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2625 2625 AS 500/2243/X ADV 500/2248/9 n/a
Discount codes: AS KS4 KA1 AS KS5 5310 ADV 5310 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Understanding Communication and Culture COMM1 50 25 100
Unit 2 The Individual and Contemporary Culture Portfolio/web-folio COMM2 50 25 100
A2 Unit 3 Communicating Culture COMM3 - 25 100
Unit 4 Communication and Culture in Practice Portfolio/web-folio COMM4 - 25 100
AS subject award COMM1 + COMM2 1626 - - 200
ADV subject award COMM1 + COMM2 + COMM3 + COMM4 2626 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1626, 2626 as appropriate) if certification is required.
Details of all the elements on the portfolio/web-folio work for units 2 and 4 will be available on the subject page of our website http://www.aqa.org.uk/subjects/communication-and-culture under the ‘updates’ section in the year before the year of assessment.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCE
48
Computer Science GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7516 ADV 7517 AS 601/4699/0 ADV 601/4569/9 n/a
Discount codes:
AS KS4 CK11 AS KS5 26100 ADV 26100 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS
A - C# Paper 1 Programming (on-screen) 7516/1A
7516A 50 75 75
Paper 2 Data representation 7516/2 50 75 75
B - Java Paper 1 Programming (on-screen) 7516/1B
7516B 50 75 75
Paper 2 Data representation 7516/2 50 75 75
C - Pascal/Delphi Paper 1 Programming (on-screen) 7516/1C
7516C 50 75 75
Paper 2 Data representation 7516/2 50 75 75
D - Python Paper 1 Programming (on-screen) 7516/1D
7516D 50 75 75
Paper 2 Data representation 7516/2 50 75 75
E - VB.Net Paper 1 Programming (on-screen) 7516/1E
7516E 50 75 75
Paper 2 Data representation 7516/2 50 75 75
ADV
A - C#
Paper 1 Programming (on-screen) 7517/1A
7517A
40 100 150
Paper 2 Data representation 7517/2 40 100 150
NEA Computing practical project 7517/C 20 75 75
B - Java
Paper 1 Programming (on-screen) 7517/1B
7517B
40 100 150
Paper 2 Data representation 7517/2 40 100 150
NEA Computing practical project 7517/C 20 75 75
C - Pascal/Delphi
Paper 1 Programming (on-screen) 7517/1C
7517C
40 100 150
Paper 2 Data representation 7517/2 40 100 150
NEA Computing practical project 7517/C 20 75 75
D - Python
Paper 1 Programming (on-screen) 7517/1D
7517D
40 100 150
Paper 2 Data representation 7517/2 40 100 150
NEA Computing practical project 7517/C 20 75 75
E - VB.Net
Paper 1 Programming (on-screen) 7517/1E
7517E
40 100 150
Paper 2 Data representation 7517/2 40 100 150
NEA Computing practical project 7517/C 20 75 75
(continued on next page)
Entry codes 2018/19 - GCE
49
Computer Science (continued) GCE
Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
50
Creative Writing Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2750 2750 AS 600/7746/3 ADV 600/7745/1 n/a
Discount codes: AS KS4 KC3 AS KS5 5230 ADV 5230 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Writing On Demand CREW1 40 20 80
Unit 2 Exploring Creative Writing Coursework CREW2 60 30 120
A2 Unit 3 From Reading to Writing CREW3 - 20 80
Unit 4 The Writing Portfolio Coursework CREW4 - 30 120
AS subject award CREW1 + CREW2 1751 - - 200
ADV subject award CREW1 + CREW2 + CREW3 + CREW4 2751 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1751, 2751 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCE
51
Dance GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7236 ADV 7237 AS 601/8298/2 ADV 601/8297/0 n/a
Discount codes:
AS KS4 LB1 AS KS5 7230 ADV 7230 Entry
code
June 2019 6A19
21/2/19
AS NEA Performance and choreography
(marked by AQA) 7236/X 7236
50 80
Paper Critical engagement 7236/W 50 80
ADV NEA Performance and choreography
(marked by AQA) 7237/X 7237
50 80
Paper Critical engagement 7237/W 50 100
A single entry is all that is needed for the examination paper, non-exam assessment and certification.
Examiner visits (1 March – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates provided that the centre is able to supervise and authenticate the non-exam assessment.
.
Entry codes 2018/19 - GCE
52
Design and Technology: new spec Fashion and Textiles GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7561 ADV 7562 AS 603/1107/1 ADV 603/1104/6 n/a
Discount codes:
AS KS4 XA5A AS KS5 9050 ADV 9050 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 7561/W
7561 50 80
NEA 7561/C 50 80
ADV
Paper 1 7562/1
7562
30 120
Paper 2 7562/2 20 80
NEA 7562/C 50 100
A single entry is all that is needed for examination paper(s), non-exam assessments and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
53
Design and Technology: Final re-sit opportunity Food Technology GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2540 2540 AS 500/2219/2 ADV 500/2218/0 n/a
Discount codes: AS KS4 NH6 AS KS5 9020 ADV 9020 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Materials, Components and Application FOOD1 50 25 100
Unit 2 Learning Through Designing and Making Coursework FOOD2 50 25 100
A2 Unit 3 Design and Manufacture FOOD3 - 25 100
Unit 4 Designing and Making Practice Coursework FOOD4 - 25 100
AS subject award FOOD1 + FOOD2 1541 - - 200
ADV subject award FOOD1 + FOOD2 + FOOD3 + FOOD4 2541 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1541, 2541 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates where:
• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)
or
• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award
Entry codes 2018/19 - GCE
54
Design and Technology: Final re-sit opportunity Product Design (3-D Design) GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2550 2550 AS 500/2216/7 ADV 500/2215/5 n/a
Discount codes: AS KS4 VF2 AS KS5 9080 ADV 9080 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Materials, Components and Application PROD1 50 25 100
Unit 2 Learning Through Designing and Making Coursework PROD2 50 25 100
A2 Unit 3 Design and Manufacture PROD3 - 25 100
Unit 4 Designing and Making Practice Coursework PROD4 - 25 100
AS subject award PROD1 + PROD2 1551 - - 200
ADV subject award PROD1 + PROD2 + PROD3 + PROD4 2551 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1551, 2551 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates where:
• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)
or
• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award
Entry codes 2018/19 - GCE
55
Design and Technology: Final re-sit opportunity Product Design (Textiles) GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2560 2560 AS 500/2253/2 ADV 500/2241/6 n/a
Discount codes: AS KS4 XA5A AS KS5 9050 ADV 9050 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Materials, Components and Application TEXT1 50 25 100
Unit 2 Learning Through Designing and Making Coursework TEXT2 50 25 100
A2 Unit 3 Design and Manufacture TEXT3 - 25 100
Unit 4 Designing and Making Practice Coursework TEXT4 - 25 100
AS subject award TEXT1 + TEXT2 1561 - - 200
ADV subject award TEXT1 + TEXT2 + TEXT3 + TEXT4 2561 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1561, 2561 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates where:
• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)
or
• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award
Entry codes 2018/19 - GCE
56
Design and Technology: Product Design new spec GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7551 ADV 7552 AS 603/1108/3 ADV 603/1133/2 n/a
Discount codes:
AS KS4 VF2 AS KS5 9080 ADV 9080 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 7551/W
7551 50 80
NEA 7551/C 50 80
ADV
Paper 1 7552/1
7552
30 120
Paper 2 7552/2 20 80
NEA 7552/C 50 100
A single entry is all that is needed for examination paper(s), non-exam assessments and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
57
Design and Technology: Final re-sit opportunity Systems and Control Technology GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2555 2555 AS 500/2217/9 ADV 500/2186/2 n/a
Discount codes: AS KS4 WA2 AS KS5 9060 ADV 9060 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Materials, Components and Application SYST1 50 25 100
Unit 2 Learning Through Designing and Making Coursework SYST2 50 25 100
A2 Unit 3 Design and Manufacture SYST3 - 25 100
Unit 4 Designing and Making Practice Coursework SYST4 - 25 100
AS subject award SYST1 + SYST2 1556 - - 200
ADV subject award SYST1 + SYST2 + SYST3 + SYST4 2556 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1556, 2556 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates where:
• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)
or
• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award
Entry codes 2018/19 - GCE
58
Drama and Theatre GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7261 ADV 7262 AS 601/8585/5 ADV 601/8494/2 n/a
Discount codes:
AS KS4 LC11 AS KS5 5210 ADV 5210 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Paper Interpreting drama 7261/W
7261 40 80 80
NEA Process and performance 7261/C 60 60 120
ADV
Paper 1 Drama and theatre 7262/W
7262
40 80 80
NEA Creating original drama 7262/C 30 60 60
NEA Making theatre (marked by AQA) 7262/X 30 60 60
A single entry is all that is needed for examination papers, non-exam assessments and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
59
Economics GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7135 ADV 7136 AS 601/4372/1 ADV 601/4371/X n/a
Discount codes:
AS KS4 EB AS KS5 4410 ADV 4410 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 The Operation of Markets and Market Failure 7135/1
7135 50 70
Paper 2 The National Economy in a Global Context 7135/2 50 70
ADV
Paper 1 Markets and Market Failure 7136/1
7136
33.3 80
Paper 2 National and International Economy 7136/2 33.3 80
Paper 3 Economic Principles and Issues 7136/3 33.3 80
A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
60
Electronics Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2430 2430 AS 500/2355/X ADV 500/2341/X n/a
Discount codes:
AS KS4 RC52 AS KS5 1730 ADV 1730 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS
Unit 1 Introductory Electronics ELEC1 35 17.5 105
Unit 2 Further Electronics ELEC2 35 17.5 105
Unit 3 Practical System Development Coursework ELEC3 30 15 90
A2
Unit 4 Programmable Control Systems ELEC4 - 17.5 105
Unit 5 Communications Systems ELEC5 - 17.5 105
Unit 6 Practical System Synthesis Coursework ELEC6 - 15 90
AS subject award ELEC1 + ELEC2 + ELEC3 1431 - - 300
ADV subject award ELEC1 + ELEC2 + ELEC3 + ELEC4 + ELEC5 + ELEC6
2431 - - 600
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1431, 2431 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Private candidates wishing to submit coursework for assessment must make arrangements for their work to be authenticated. Details of their authentication arrangements must be submitted to us using a Private candidate coursework information form at the time their entry request is made. Please see our website aqa.org.uk/private for further details.
Entry codes 2018/19 - GCE
61
English Language GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7701 ADV 7702 AS 601/4846/9 ADV 601/4640/0 English, Other
Discount codes:
AS KS4 FK2B AS KS5 5030 ADV 5030 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Paper 1 Language and the Individual 7701/1
7701 50 70 70
Paper 2 Language Varieties 7701/2 50 70 70
ADV
Paper 1 Language, the Individual and Society 7702/1
7702
40 100 200
Paper 2 Language Diversity and Change 7702/2 40 100 200
NEA Language in Action 7702/C 20 100 100
A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates.
The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.
Entry codes 2018/19 - GCE
62
English Language and Literature GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7706 ADV 7707 AS 601/4642/4 ADV 601/4641/2 n/a
Discount codes:
AS KS4 FK2A AS KS5 5010 ADV 5010 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 Views and Voices 7706/1
7706 50 75
Paper 2 People and Places 7706/2 50 75
ADV
Paper 1 Telling Stories 7707/1
7707
40 100
Paper 2 Exploring Conflict 7707/2 40 100
NEA Making Connections 7707/C 20 50
A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates.
The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.
Entry codes 2018/19 - GCE
63
English Literature A GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7711 ADV 7712 AS 601/5259/X ADV 601/5327/1 English, Other
Discount codes:
AS KS4 FC4 AS KS5 5110 ADV 5110 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Paper 1 Love through the Ages: Shakespeare and
Poetry 7711/1 7711
50 50 50
Paper 2 Love through the Ages: Prose 7711/2 50 50 50
ADV
A
Paper 1 Love through the Ages 7712/1
7712A
40 75 150
Paper 2 Texts in Shared Contexts: WW1 and its Aftermath 7712/2A 40 75 150
NEA Independent Critical Study: Texts across Time 7712/C 20 50 75
B
Paper 1 Love through the Ages 7712/1
7712B
40 75 150
Paper 2 Texts in Shared Contexts: Modern Times: Literature from 1945 to the Present Day
7712/2B 40 75 150
NEA Independent Critical Study: Texts across Time 7712/C 20 50 75
Candidates wishing to take the Advanced qualification will only be allowed to enter for one of the two Advanced options (A or B) per series.
A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates.
The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.
Entry codes 2018/19 - GCE
64
English Literature B GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7716 ADV 7717 AS 601/5257/6 ADV 601/5328/3 English, Other
Discount codes:
AS KS4 FC4 AS KS5 5110 ADV 5110 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS
AA Paper 1 Drama: Tragedy 7716/1A
7716AA 50 50 50
Paper 2 Prose and Poetry: Tragedy 7716/2A 50 50 50
AB Paper 1 Drama: Tragedy 7716/1A
7716AB 50 50 50
Paper 2 Prose and Poetry: Comedy 7716/2B 50 50 50
BA Paper 1 Drama: Comedy 7716/1B
7716BA 50 50 50
Paper 2 Prose and Poetry: Tragedy 7716/2A 50 50 50
BB Paper 1 Drama: Comedy 7716/1B
7716BB 50 50 50
Paper 2 Prose and Poetry: Comedy 7716/2B 50 50 50
ADV
AA
Paper 1 Literary Genres: Tragedy 7717/1A
7717AA
40 75 300
Paper 2 Texts and Genres: Crime Writing 7717/2A 40 75 300
NEA Theory and Independence 7717/C 20 50 150
AB
Paper 1 Literary Genres: Tragedy 7717/1A
7717AB
40 75 300
Paper 2 Texts and Genres: Political Writing 7717/2B 40 75 300
NEA Theory and Independence 7717/C 20 50 150
BA
Paper 1 Literary Genres: Comedy 7717/1B
7717BA
40 75 300
Paper 2 Texts and Genres: Crime Writing 7717/2A 40 75 300
NEA Theory and Independence 7717/C 20 50 150
BB
Paper 1 Literary Genres: Comedy 7717/1B
7717BB
40 75 300
Paper 2 Texts and Genres: Political Writing 7717/2B 40 75 300
NEA Theory and Independence 7717/C 20 50 150
Candidates may only enter for one of the AS and/or Advanced entry options per series. A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates.
The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.
Entry codes 2018/19 - GCE
65
Environmental Science new spec GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7446 ADV 7447 AS 603/0977/5 ADV 603/0978/7 n/a
Discount codes:
AS KS4 QA3 AS KS5 1750 ADV 1750 Entry
code
June 2019 6A19
21/2/19
AS Written paper 7446 7446 100 120
ADV Paper 1 7447/1
7447 50 120
Paper 2 7447/2 50 120
A single entry is all that is needed for the examination paper(s) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates. Centres accepting private candidates must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Environmental Studies Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2440 2440 AS 500/2521/1 ADV 500/2513/2 n/a
Discount codes: AS KS4 QA3 AS KS5 1750 ADV 1750 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 The Living Environment ENVS1 40 20 80
Unit 2 The Physical Environment ENVS2 60 30 120
A2 Unit 3 Energy Resources and Environmental Pollution ENVS3 - 25 100
Unit 4 Biological Resources and Sustainability ENVS4 - 25 100
AS subject award ENVS1 + ENVS2 1441 - - 200
ADV subject award ENVS1 + ENVS2 + ENVS3 + ENVS4 2441 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1441, 2441 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
66
French GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):
AS 7651 ADV 7652 AS 601/8726/8 ADV 601/8727/X Ebacc, Other
Discount codes:
AS KS4 FKF AS KS5 5650 ADV 5650 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS
T
Paper 1 Listening, reading and writing 7651/1
7651T
45 90 90
Paper 2 Writing 7651/2 25 50 50
NEA Teacher conducted speaking test (marked by AQA) 7651/3T 30 60 60
V
Paper 1 Listening, reading and writing 7651/1
7651V
45 90 90
Paper 2 Writing 7651/2 25 50 50
NEA Visiting examiner conducted speaking test (marked by AQA) 7651/3V 30 60 60
ADV
T
Paper 1 Listening, reading and writing 7652/1
7652T
50 100 200
Paper 2 Writing 7652/2 20 80 80
NEA Teacher conducted speaking test (marked by AQA) 7652/3T 30 60 120
V
Paper 1 Listening, reading and writing 7652/1
7652V
50 100 200
Paper 2 Writing 7652/2 20 80 80
NEA Visiting examiner conducted speaking test (marked by AQA) 7652/3V 30 60 120
Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
Speaking tests:
• Teacher conducted options Centres must submit candidates’ speaking tests on CD or memory stick.
• Visiting examiner options Centres who request a visiting examiner must meet the requirement for a minimum of ten candidates.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates provided they attend an AQA approved centre willing to make arrangements for conducting the speaking tests. For the A-level specification, that centre must also be prepared to supervise and authenticate the individual research project.
Entry codes 2018/19 - GCE
67
Further Mathematics new spec GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):
AS 7366 ADV 7367 AS 603/1604/4 ADV 603/1841/7 Maths, Other
Discount codes:
AS KS4 RB1A AS KS5 2330 ADV 2330 Entry
code
June 2019 6A19
21/2/19
AS
Discrete and Statistics
Paper 1 7366/1
7366DS
50 80
Paper 2 Discrete 7366/2D 25 40
Statistics 7366/2S 25 40
Statistics and Mechanics
Paper 1 7366/1
7366SM
50 80
Paper 2 Statistics 7366/2S 25 40
Mechanics 7366/2M 25 40
Mechanics and Discrete
Paper 1 7366/1
7366MD
50 80
Paper 2 Mechanics 7366/2M 25 40
Discrete 7366/2D 25 40
ADV
Discrete and Statistics
Paper 1 7367/1
7367DS
33⅓ 100
Paper 2 7367/2 33⅓ 100
Paper 3 Discrete 7367/3D 16⅔ 50
Statistics 7367/3S 16⅔ 50
Statistics and Mechanics
Paper 1 7367/1
7367SM
33⅓ 100
Paper 2 7367/2 33⅓ 100
Paper 3 Statistics 7367/3S 16⅔ 50
Mechanics 7367/3M 16⅔ 50
Mechanics and Discrete
Paper 1 7367/1
7367MD
33⅓ 100
Paper 2 7367/2 33⅓ 100
Paper 3 Mechanics 7367/3M 16⅔ 50
Discrete 7367/3D 16⅔ 50
Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
68
General Studies A Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2760 2760 AS 500/2222/2 ADV 500/2184/9 n/a
Discount codes: AS KS4 EA3 AS KS5 7810 ADV 7810 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 AS Culture and Society GENA1/1 Objective test
GENA1/2 Written paper GENA1 50 25 100
Unit 2 AS Science and Society GENA2/1 Objective test GENA2/2 Written paper GENA2 50 25 100
A2 Unit 3 A2 Culture and Society GENA3 - 25 100
Unit 4 A2 Science and Society GENA4 - 25 100
AS subject award GENA1 + GENA2 1761 - - 200
ADV subject award GENA1 + GENA2 + GENA3 + GENA4 2761 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1761, 2761 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
69
General Studies B Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2765 2765 AS 500/2242/8 ADV 500/2223/4 n/a
Discount codes: AS KS4 EA3 AS KS5 7810 ADV 7810 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Conflict GENB1 50 25 100
Unit 2 Space GENB2 50 25 100
A2 Unit 3 Power GENB3 - 25 100
Unit 4 Change GENB4 - 25 100
AS subject award GENB1 + GENB2 1766 - - 200
ADV subject award GENB1 + GENB2 + GENB3 + GENB4 2766 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1766, 2766 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
70
Geography GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7036 ADV 7037 AS 601/8971/X ADV 601/8940/X n/a
Discount codes:
AS KS4 RF4 AS KS5 3910 ADV 3910 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Paper 1 Physical geography and
people and the environment 7036/1 7036 50 80 80
Paper 2 Human geography and Geography fieldwork investigation 7036/2 50 80 80
ADV
Paper 1 Physical geography 7037/1
7037
40 120 120
Paper 2 Human geography 7037/2 40 120 120
NEA Geography fieldwork investigation 7037/C 20 60 60
A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates. Private candidates wishing to undertake the AS must undertake two days of geographical fieldwork in relation to processes in both physical and human geography. The centre will require evidence to prove that this has been done (for example photos or data that has been collected).
The Advanced specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessment.
Centres accepting private candidates for either the AS or Advanced specification must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCE
71
German GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):
AS 7661 ADV 7662 AS 601/8728/1 ADV 601/8729/3 Ebacc, Other
Discount codes:
AS KS4 FKG AS KS5 5670 ADV 5670 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS
T
Paper 1 Listening, reading and writing 7661/1
7661T
45 90 90
Paper 2 Writing 7661/2 25 50 50
NEA Teacher conducted speaking test (Marked by AQA) 7661/3T 30 60 60
V
Paper 1 Listening, reading and writing 7661/1
7661V
45 90 90
Paper 2 Writing 7661/2 25 50 50
NEA Visiting examiner conducted speaking test (Marked by AQA)
7661/3V 30 60 60
ADV
T
Paper 1 Listening, reading and writing 7662/1
7662T
50 100 200
Paper 2 Writing 7662/2 20 80 80
NEA Teacher conducted speaking test (Marked by AQA) 7662/3T 30 60 120
V
Paper 1 Listening, reading and writing 7662/1
7662V
50 100 200
Paper 2 Writing 7662/2 20 80 80
NEA Visiting examiner conducted speaking test (Marked by AQA)
7662/3V 30 60 120
Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers and certification.
Speaking tests:
• Teacher conducted options Centres must submit candidates’ speaking tests on CD or memory stick.
• Visiting examiner options Centres who request a visiting examiner must meet the requirement for a minimum of ten candidates.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates provided they attend an AQA approved centre willing to make arrangements for conducting the speaking tests. For the A-level specification, that centre must also be prepared to supervise and authenticate the individual research project.
Entry codes 2018/19 - GCE
72
Government and Politics Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2150 2150 AS 500/2481/4 ADV 500/2480/2 n/a
Discount codes: AS KS4 EA AS KS5 4830 ADV 4830 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 People, Politics and Participation GOVP1 50 25 100
Unit 2 Governing Modern Britain GOVP2 50 25 100
A2
Unit 3 Option A: The Politics of the USA GOV3A - 25 100
Option B: Ideologies GOV3B - 25 100
Unit 4 Option A: The Government of the USA GOV4A - 25 100
Option B: Political Issues: Ideologies in Action GOV4B - 25 100
AS subject award GOVP1 + GOVP2 1151 - - 200
ADV subject award GOVP1 + GOVP2 + GOV3A or GOV3B or GOV3C* + GOV4A or GOV4B or GOV4C*
2151 - - 400
* Candidates must have a result from a previous series.
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1151, 2151 as appropriate) if certification is required.
Unit GOV3C (Politics and Power) and GOV4C (Perspectives on Modern Politics) were last offered in the January 2012 series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Politics new spec GCE
See page 96
Entry codes 2018/19 - GCE
73
Health and Social Care Final re-sit opportunity GCE
Series availability
Specification code Basedata group code Qualification numbers:
AS single AS double ADV single ADV double
Attainment 8 measure(s)
2820 2820 600/5259/4 600/5258/2 600/5257/0 600/5256/9 n/a
Discount codes: AS single KS4 AS single KS5 AS double KS4 AS double KS5 ADV single ADV double
PA1 0003 PA1 0003 0003 0003
Entry code
June 2019 6A19
21/2/19
AS sgl
AS dbl
ADV sgl
ADV dbl
Max UMS
AS
Unit 1 Effective Care and Communication Portfolio HSC01 50 25 25 12.5 100
Unit 2 Understanding Health Conditions and Patient Care Pathways HSC02 50 25 25 12.5 100
Unit 3 Life as a Challenge HSC03 50 25 25 12.5 100
Unit 4 Educating Children and Young People Portfolio HSC04 - 25 - 12.5 100
A2
Unit 5 Learning and Development HSC05 - - 25 12.5 100
Unit 6 Practitioner Roles Portfolio HSC06 - - 25 12.5 100
Unit 7 Food and Fitness HSC07 - - 25 12.5 100
Unit 8 Using and Understanding Research Portfolio HSC08 - - - 12.5 100
Unit 9 Understanding Mental Disorders Portfolio HSC09 - - - 12.5 100
Unit 10 Diagnosis, Treatment and Preventative Strategies HSC10 - - 25 12.5 100
AS single subject award HSC01 + HSC02 or HSC03
1821 - - - - 200
AS double subject award HSC01 + HSC02 + HSC03 + HSC04
1822 - - - - 400
ADV single subject award HSC01 + HSC02 or HSC03 + HSC06 + HSC05 or HSC07 or HSC10
2821 - - - - 400
ADV double subject award HSC01 + HSC02 + HSC03 + HSC04 + HSC06 + three from HSC05, HSC07, HSC08, HSC09, HSC10 which must include at least two from HSC05, HSC07, HSC10
2822 - - - - 800
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1821, 1822, 2821, 2822 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCE
74
History GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers:
AS 7041 ADV 7042 AS 601/4974/7 ADV 601/4973/5
Discount codes: Attainment 8
(AS only):
AS KS4 DB AS KS5 4010 ADV 4010 Measure(s): Ebacc, Other
Entry code
June 2019 6A19
21/2/19
AS Paper 1 Breadth Study - one of the AS paper 1 options A-L see
notes below
50 50
Paper 2 Depth Study - one of the AS paper 2 options A-T 50 50
ADV
Paper 1 Breadth Study - one of the Advanced paper 1 options A-L see
notes below
40 80
Paper 2 Depth Study - one of the Advanced paper 2 options A-T 40 80
NEA Historical Investigation (Personal Study) 20 40
AS components Component (* indicates a British history option)
AS Paper 1 Breadth study
1A The Age of the Crusades, c1071-1149 7041/1A 1B Spain in the Age of Discovery, 1469–1556 7041/1B 1C* The Tudors: England, 1485–1547 7041/1C 1D* Stuart Britain and the Crisis of Monarchy, 1603–1649 7041/1D 1E Russia in the Age of Absolutism and Enlightenment, 1682–1725 7041/1E 1F* Industrialisation and the People: Britain, c1783–1832 7041/1F 1G* Challenge and Transformation: Britain, c1851–1914 7041/1G 1H Tsarist and Communist Russia, 1855–1917 7041/1H 1J* The British Empire, c1857–1914 7041/1J 1K The Making of a Superpower: USA, 1865–1920 7041/1K 1L The Quest for Political Stability: Germany, 1871–1929 7041/1L
AS Paper 2 Depth study
2A* Royal Authority and the Angevin Kings, 1154–1189 7041/2A 2B* The Wars of the Roses, 1450–1471 7041/2B 2C The Reformation in Europe, c1500–1531 7041/2C 2D* Religious Conflict and the Church in England, c1529–c1547 7041/2D 2E* The English Revolution, 1625–1642 7041/2E 2F The Sun King: Louis XIV, France and Europe, 1643–1685 7041/2F 2G The Birth of the USA, 1760–1776 7041/2G 2H France in Revolution, 1774–1795 7041/2H 2J America: A Nation Divided, c1845–1861 7041/2J 2K International Relations and Global Conflict, c1890–1917 7041/2K 2L Italy and Fascism, c1900–1926 7041/2L 2M* Wars and Welfare: Britain in Transition, 1906–1929 7041/2M 2N Revolution and Dictatorship: Russia and the Soviet Union, 1917–1929 7041/2N 2O Democracy and Nazism: Germany, 1918–1933 7041/2O 2P The Transformation of China, 1936–1962 7041/2P 2Q The American Dream: Reality and Illusion, 1945–1963 7041/2Q 2R The Cold War, c1945–1963 7041/2R 2S* The Making of Modern Britain, 1951–1979 7041/2S 2T The Crisis of Communism: The USSR, 1953–2000 7041/2T
Entry codes 2018/19 - GCE
75
AS notes
Candidates may only enter for one of the AS entry options per series. A single entry is all that is needed for both examination papers and certification.
Candidates must be assessed in one British history option (indicated by an asterisk*) and one non-British history option. In addition the following combinations of papers are not permitted: • 1C cannot be combined with 2C • 1D cannot be combined with 2F
AS entry codes
These are generated as follows: • the first four characters are the AS specification code 7041 • the fifth character is the letter that indicates the paper 1 option • the last character is the letter that indicates the paper 2 option. The table below shows all the valid combinations of papers and associated AS entry codes. An asterisk* indicates a British history option.
AS Paper 1 – Breadth Study
1A 1B 1C* 1D* 1E 1F* 1G* 1H 1J* 1K 1L
AS P
aper
2 –
Dep
th S
tudy
2A* 7041AA 7041BA - - 7041EA - - 7041HA - 7041KA 7041LA
2B* 7041AB 7041BB - - 7041EB - - 7041HB - 7041KB 7041LB
2C - - - 7041DC - 7041FC 7041GC - 7041JC - -
2D* 7041AD 7041BD - - 7041ED - - 7041HD - 7041KD 7041LD
2E* 7041AE 7041BE - - 7041EE - - 7041HE - 7041KE 7041LE
2F - - 7041CF - - 7041FF 7041GF - 7041JF - -
2G - - 7041CG 7041DG - 7041FG 7041GG - 7041JG - -
2H - - 7041CH 7041DH - 7041FH 7041GH - 7041JH - -
2J - - 7041CJ 7041DJ - 7041FJ 7041GJ - 7041JJ - -
2K - - 7041CK 7041DK - 7041FK 7041GK - 7041JK - -
2L - - 7041CL 7041DL - 7041FL 7041GL - 7041JL - -
2M* 7041AM 7041BM - - 7041EM - - 7041HM - 7041KM 7041LM
2N - - 7041CN 7041DN - 7041FN 7041GN - 7041JN - -
2O - - 7041CO 7041DO - 7041FO 7041GO - 7041JO - -
2P - - 7041CP 7041DP - 7041FP 7041GP - 7041JP - -
2Q - - 7041CQ 7041DQ - 7041FQ 7041GQ - 7041JQ - -
2R - - 7041CR 7041DR - 7041FR 7041GR - 7041JR - -
2S* 7041AS 7041BS - - 7041ES - - 7041HS - 7041KS 7041LS
2T - - 7041CT 7041DT - 7041FT 7041GT - 7041JT - -
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates.
Entry codes 2018/19 - GCE
76
Advanced components Component (* indicates a British history option)
ADV Paper 1 Breadth study
1A The Age of the Crusades, c1071–1204 7042/1A 1B Spain in the Age of Discovery, 1469–1598 7042/1B 1C* The Tudors: England, 1485–1603 7042/1C 1D* Stuart Britain and the Crisis of Monarchy, 1603–1702 7042/1D 1E Russia in the Age of Absolutism and Enlightenment, 1682–1796 7042/1E 1F* Industrialisation and the People: Britain, c1783–1885 7042/1F 1G* Challenge and Transformation: Britain, c1851–1964 7042/1G 1H Tsarist and Communist Russia, 1855–1964 7042/1H 1J* The British Empire, c1857–1967 7042/1J 1K The Making of a Superpower: USA, 1865–1975 7042/1K 1L The Quest for Political Stability: Germany, 1871–1991 7042/1L
ADV Paper 2 Depth study
2A* Royal Authority and the Angevin Kings, 1154–1216 7042/2A 2B* The Wars of the Roses, 1450–1499 7042/2B 2C The Reformation in Europe, c1500–1564 7042/2C 2D* Religious Conflict and the Church in England, c1529–c1570 7042/2D 2E* The English Revolution, 1625–1660 7042/2E 2F The Sun King: Louis XIV, France and Europe, 1643–1715 7042/2F 2G The Birth of the USA, 1760–1801 7042/2G 2H France in Revolution, 1774–1815 7042/2H 2J America: A Nation Divided, c1845–1877 7042/2J 2K International Relations and Global Conflict, c1890–1941 7042/2K 2L Italy and Fascism, c1900–1945 7042/2L 2M* Wars and Welfare: Britain in Transition, 1906–1957 7042/2M 2N Revolution and Dictatorship: Russia, 1917–1953 7042/2N 2O Democracy and Nazism: Germany, 1918–1945 7042/2O 2P The Transformation of China, 1936–1997 7042/2P 2Q The American Dream: Reality and Illusion, 1945–1980 7042/2Q 2R The Cold War, c1945–1991 7042/2R 2S* The Making of Modern Britain, 1951–2007 7042/2S 2T The Crisis of Communism: The USSR and the Soviet Empire, 1953–2000 7042/2T
NEA Historical Investigation (Personal Study) 7042/C Advanced notes
Candidates may only enter for one of the Advanced entry options per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
Candidates must be assessed in one British history option (indicated by an asterisk*) and one non-British history option. In addition the following combinations of papers are not permitted: • 1C cannot be combined with 2C • 1D cannot be combined with 2F
There is an additional requirement of the Advanced level specification that candidates must cover a chronological range of at least 200 years through the topics assessed in paper 1 + paper 2 + NEA.
If a student wishes to carry forward, they must either re-take the same written exam options as the original attempt, or confirm that the new options still comply with the requirements of the specification (ie there is no overlap of content between the original NEA and the new exam options, and that all three components together cover a chronological range of at least 200 years).
Entry codes 2018/19 - GCE
77
Advanced entry codes
These are generated as follows: • the first four characters are the Advanced specification code 7042 • the fifth character is the letter that indicates the paper 1 option • the last character is the letter that indicates the paper 2 option. The table below shows all the valid combinations of papers and associated Advanced entry codes. An asterisk* indicates a British history option.
Advanced Paper 1 – Breadth Study
1A 1B 1C* 1D* 1E 1F* 1G* 1H 1J* 1K 1L
Adva
nced
Pap
er 2
– D
epth
Stu
dy
2A* 7042AA 7042BA - - 7042EA - - 7042HA - 7042KA 7042LA
2B* 7042AB 7042BB - - 7042EB - - 7042HB - 7042KB 7042LB
2C - - - 7042DC - 7042FC 7042GC - 7042JC - -
2D* 7042AD 7042BD - - 7042ED - - 7042HD - 7042KD 7042LD
2E* 7042AE 7042BE - - 7042EE - - 7042HE - 7042KE 7042LE
2F - - 7042CF - - 7042FF 7042GF - 7042JF - -
2G - - 7042CG 7042DG - 7042FG 7042GG - 7042JG - -
2H - - 7042CH 7042DH - 7042FH 7042GH - 7042JH - -
2J - - 7042CJ 7042DJ - 7042FJ 7042GJ - 7042JJ - -
2K - - 7042CK 7042DK - 7042FK 7042GK - 7042JK - -
2L - - 7042CL 7042DL - 7042FL 7042GL - 7042JL - -
2M* 7042AM 7042BM - - 7042EM - - 7042HM - 7042KM 7042LM
2N - - 7042CN 7042DN - 7042FN 7042GN - 7042JN - -
2O - - 7042CO 7042DO - 7042FO 7042GO - 7042JO - -
2P - - 7042CP 7042DP - 7042FP 7042GP - 7042JP - -
2Q - - 7042CQ 7042DQ - 7042FQ 7042GQ - 7042JQ - -
2R - - 7042CR 7042DR - 7042FR 7042GR - 7042JR - -
2S* 7042AS 7042BS - - 7042ES - - 7042HS - 7042KS 7042LS
2T - - 7042CT 7042DT - 7042FT 7042GT - 7042JT - -
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The Advanced specification is available to private candidates.
Entry codes 2018/19 - GCE
78
History of Art Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2250 2250 AS 500/2227/1 ADV 500/2224/6 n/a
Discount codes: AS KS4 JA33 AS KS5 3830 ADV 3830 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Visual Analysis and Interpretation HART1 40 20 80
Unit 2 Themes in History of Art HART2 60 30 120
A2 Unit 3 Investigation and Interpretation (1) HART3 - 25 100
Unit 4 Investigation and Interpretation (2) HART4 - 25 100
AS subject award HART1 + HART2 1251 - - 200
ADV subject award HART1 + HART2 + HART3 + HART4 2251 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1251, 2251 as appropriate) if certification is required in June 2019.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
79
Information and Final re-sit opportunity Communication Technology GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2520 2520 AS 500/2437/1 ADV 500/2349/4 n/a
Discount codes: AS KS4 CJ AS KS5 2650 ADV 2650 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Practical Problem Solving in the Digital World INFO1 50 25 100
Unit 2 Living in the Digital World INFO2 50 25 100
A2 Unit 3 The Use of ICT in the Digital World INFO3 - 30 120
Unit 4 Practical Issues Involved in the Use of ICT in the Digital World Coursework INFO4 - 20 80
AS subject award INFO1 + INFO2 1521 - - 200
ADV subject award INFO1 + INFO2 + INFO3 + INFO4 2521 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1521, 2521 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS units of this specification are available to private candidates. The A2 units of this specification are not available to private candidates.
Entry codes 2018/19 - GCE
80
Law Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2160 2160 AS 500/2324/X ADV 500/2330/5 n/a
Discount codes: AS KS4 EC1 AS KS5 4770 ADV 4770 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Law Making and the Legal System LAW01 50 25 100
Unit 2 The Concept of Liability LAW02 50 25 100
A2 Unit 3 Either Criminal Law (Offences against the Person)
or Contract Law LAW03 - 25 100
Unit 4 Either Criminal Law (Offences against Property) or Tort and Concepts of Law LAW04 - 25 100
AS subject award LAW01 + LAW02 1161 - - 200
ADV subject award LAW01 + LAW02 + LAW03 + LAW04 2161 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1161, 2161 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
81
Law new spec GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7161 ADV 7162 AS 603/1008/X ADV 603/1009/1 n/a
Discount codes:
AS KS4 EC1 AS KS5 4770 ADV 4770
Entry code
June 2019 6A19
21/2/19
AS Paper 1 7161/1
7161 50 80
Paper 2 7161/2 50 80
ADV
A - Contract
Paper 1 7162/1
7162A
33⅓ 100
Paper 2 7162/2 33⅓ 100
Paper 3A Contract 7162/3A 33⅓ 100
B – Human rights
Paper 1 7162/1
7162B
33⅓ 100
Paper 2 7162/2 33⅓ 100
Paper 3B Human Rights 7162/3B 33⅓ 100
A single entry is all that is needed for examination papers and certification. Candidates may enter for only one of the Advanced options per series.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
82
Mathematics Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Maths AS Maths ADV Pure AS Pure ADV Further AS Further ADV Attainment 8 measure(s) (AS only):
6360 6360 100/3405/5 100/3408/0 100/6005/4 100/6006/6 100/6004/2 100/6007/8 Maths, Other
Discount codes: Maths AS KS4 Maths AS KS5 Maths ADV Pure AS KS4 Pure AS KS5 Pure ADV Further AS KS4 Further AS KS5 Further ADV
RB1 2210 2210 RB15 2230 2230 RB1A 2330 2330
Entry code
June 2019 6A19
21/2/19 AS ADV
AS
Pure Core 1 MPC1 33.3 16.7 100
Pure Core 2 MPC2 33.3 16.7 100
Further Pure 1 MFP1 33.3 16.7 100
Mechanics 1 Option B MM1B 33.3 16.7 100
Statistics 1 Option A MS1A/W Written paper MS1A/C Coursework MS1A 33.3 16.7 100
Statistics 1 Option B Written paper MS1B 33.3 16.7 100
Decision 1 MD01 33.3 16.7 100
A2
Pure Core 3 MPC3 - 16.7 100
Pure Core 4 MPC4 - 16.7 100
Further Pure 2 MFP2 - 16.7 100
Further Pure 3 MFP3 - 16.7 100
Further Pure 4 MFP4 - 16.7 100
Mechanics 2 Option B MM2B - 16.7 100
Mechanics 3 MM03 - 16.7 100
Mechanics 4 MM04 - 16.7 100
Mechanics 5 MM05 - 16.7 100
Statistics 2 Option B MS2B - 16.7 100
Statistics 3 MS03 - 16.7 100
Statistics 4 MS04 - 16.7 100
Decision 2 MD02 - 16.7 100
continued on next page
Entry codes 2018/19 - GCE
83
Mathematics (continued) Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Entry code
June 2019 6A19
21/2/19 AS ADV
AS Mathematics subject award MPC1 + MPC2 + one from MS1A, MS1B, MM1A†, MM1B or MD01
5361 - - 300
ADV Mathematics subject award MPC1 + MPC2 + MPC3 + MPC4 + Either MS1A + MM1A† or MS1A + MM1B or MS1A + MD01 or MS1A + MS2A† or MS1A + MS2B or MS1B + MM1A† or MS1B + MM1B or MS1B + MD01 or MS1B + MS2A† or MS1B + MS2B or MM1A† + MD01 or MM1A† + MM2A† or MM1A† + MM2B or MM1B + MD01 or MM1B + MM2A† or MM1B + MM2B or MD01 + MD02
6361 - - 600
AS Pure Mathematics subject award MPC1 + MPC2 + MFP1
5366 - - 300
ADV Pure Mathematics subject award MPC1 + MPC2 + MPC3 + MPC4 + MFP1 + one from MFP2, MFP3, MFP4
6366 - - 600
AS Further Mathematics subject award one from MFP1, MFP2, MFP3, MFP4 + two other units from MFP1, MFP2, MFP3, MFP4, MS1A, MS1B, MS2A†, MS2B, MS03, MS04, MM1A†, MM1B, MM2A†, MM2B, MM03, MM04, MM05, MD01, MD02
• All three units can be at AS standard. • All three units can be in Pure Mathematics. • Only one of MS1A and MS1B , one of MM1A† and MM1B ,
one of MS2A† and MS2B and one of MM2A† and MM2B can be counted towards a subject award.
5371 - - 300
ADV Further Mathematics subject award two from MFP1, MFP2, MFP3, MFP4 + four other units from MFP1, MFP2, MFP3, MFP4, MS1A, MS1B, MS2A†, MS2B, MS03, MS04, MM1A†, MM1B, MM2A†, MM2B, MM03, MM04, MM05, MD01, MD02
• Three or four Pure Mathematics units can be chosen. • At least three of the six units must be at A2 standard. • Only one of MS1A and MS1B , one of MM1A† and MM1B ,
one of MS2A† and MS2B and one of MM2A† and MM2B can be counted towards a subject award.
6371 - - 600
† Candidates must have a result from a previous series. continued on next page
Entry codes 2018/19 - GCE
84
Mathematics (continued)(final re-sit opportunity) GCE
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject awards (5361, 6361, 5366, 6366, 5371, 6371 as appropriate) if certification is required.
Units MM2A (Mechanics 2 option A) and MS2A (Statistics 2 option A) were last offered in June 2008. Unit MM1A (Mechanics 1 option A) was last offered in June 2012.
Candidates re-taking unit MS1A can also carry forward marks from the previous combined GCE Mathematics and GCE Statistics coursework component MS/SS1A/C, last offered in June 2013.
Rules for combinations of awards and unit entries
Full guidance (including examples) is available in the JCQ document GCE Maths Rules - guidance for centres at www.jcq.org.uk/exams-office/entries/gce-maths-information
• Units that contribute to an award in A-level Mathematics may not also be used for an award in Further Mathematics.
o Candidates who are awarded certificates in both A-level Mathematics and A-level Further Mathematics must use unit results from 12 different teaching modules.
o Candidates who are awarded certificates in both A-level Mathematics and AS Further Mathematics must use unit results from 9 different teaching modules.
o Candidates who are awarded certificates in both AS` Mathematics and AS Further Mathematics must use unit results from 6 different teaching modules.
• Where candidates claim a combination of awards, the units will be aggregated to provide the best grade(s) for the combination. For a candidate entered for both Mathematics and Further Mathematics, the best grade for Mathematics will be generated first.
• When units have contributed to an award in a previous series they are tied to that subject title. To release them, candidates need to re-enter the award code for these subjects again. This is particularly important for candidates who have certificated AS or A-level Mathematics in a previous series and now wish to certificate Further Mathematics.
• AS Further Mathematics (5371) cannot be certificated unless AS level Mathematics or A-level Mathematics has been or is being concurrently certificated with AQA or another awarding body.
• A-level Further Mathematics (6371) cannot be certificated unless A-level Mathematics has been or is being concurrently certificated with AQA or another awarding body.
• Combinations of subject awards for this specification are subject to the following conditions.
o Awards in the following pairs of subject titles will not be allowed:
AS Mathematics and AS Pure Mathematics; AS Mathematics and A-level Pure Mathematics; A-level Mathematics and AS Pure Mathematics; A-level Mathematics and A-level Pure Mathematics. AS Pure Mathematics and AS Further Mathematics; AS Pure Mathematics and A-level Further Mathematics; A-level Pure Mathematics and AS Further Mathematics; A-level Pure Mathematics and A-level Further Mathematics.
• Concurrent entries for the following pair of units will not be accepted:
MS1A and MS1B
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
Entry codes 2018/19 - GCE
85
Mathematics (continued)( final re-sit opportunity) GCE
This specification is available to private candidates subject to the conditions above and the following:
Unit MS1A: This unit comprises coursework and a written examination and is available only to private candidates who have already received a result for the unit, in which case the mark for the coursework component must be carried forward and the written component of the unit can be retaken.
Entry codes 2018/19 - GCE
86
Mathematics GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7356 ADV 7357 AS 603/1165/4 ADV 603/1164/2 n/a
Discount codes:
AS KS4 RB1 AS KS5 2210 ADV 2210 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 7356/1
7356 50 80
Paper 2 7356/2 50 80
ADV
Paper 1 7357/1
7357
33⅓ 100
Paper 2 7357/2 33⅓ 100
Paper 3 7357/3 33⅓ 100
A single entry is all that is needed for examination papers and certification. Please see pages 67 for details of our new GCE Further Mathematics specifications.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Further Mathematics new spec GCE
See page 67
Entry codes 2018/19 - GCE
87
Media Studies Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2570 2570 AS 500/2246/5 ADV 500/2245/3 n/a
Discount codes: AS KS4 KA2 AS KS5 5350 ADV 5350 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Investigating Media MEST1 50 25 100
Unit 2 Creating Media Coursework MEST2 50 25 100
A2 Unit 3 Media: Critical Perspectives MEST3 - 25 100
Unit 4 Media: Research and Production Coursework MEST4 - 25 100
AS subject award MEST1 + MEST2 1571 - - 200
ADV subject award MEST1 + MEST2 + MEST3 + MEST4 2571 - - 400
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1571, 2571 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates where:
• candidates are attending an AQA centre that must supervise, authenticate and mark the coursework unit(s)
or
• if the candidate has previously received a result for the coursework unit(s), then the result(s) must be used to certificate the appropriate subject award
Entry codes 2018/19 - GCE
88
Media Studies new spec GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7571 ADV 7572 AS 603/2246/9 ADV 603/2372/3 n/a
Discount codes:
AS KS4 KA2 AS KS5 5350 ADV 5350 Entry
code
June 2019 6A19
21/2/19
AS Written paper 7571/W
7571 70 112
NEA Creating a media product 7571/C 30 60
ADV
Paper 1 7572/1
7572
35 84
Paper 2 7572/2 35 84
NEA Creating a media product 7572/C 30 72
A single entry is all that is needed for examination paper(s), non-exam assessments and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
89
Modern Hebrew outgoing spec GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2675 2675 AS 500/2318/4 ADV 500/2335/4 (AS only) Ebacc,
Discount codes
Other
AS KS4 F1H AS KS5 6030 ADV 6030 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Reading and writing MHEB1 100 50 100
A2 Unit 2 Reading and writing MHEB2 - 50 100
AS subject award MHEB1 1676 - - 100
ADV subject award MHEB1 + MHEB2 2676 - - 200
This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1676, 2676 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
90
Music GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7271 ADV 7272 AS 601/8305/6 ADV 601/8304/4 n/a
Discount codes:
AS KS4 LF1 AS KS5 7010 ADV 7010 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS
Paper 1 Appraising Music 7271/W
7271
40 96 96
NEA Performance (marked by AQA) 7271/P 30 50 72
NEA Composition (marked by AQA) 7271/C 30 50 72
ADV
Paper 1 Appraising Music 7272/W
7272
40 120 120
NEA Performance (marked by AQA) 7272/P 35 50 105
NEA Composition (marked by AQA) 7272/C 25 50 75
A single entry is all that is needed for the examination paper, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates, providing that:
• the centre is able to supervise and assess the production of non-exam assessment evidence
• any other requirements concerning the administration of non-exam assessments contained within the specification are met.
Entry codes 2018/19 - GCE
91
Panjabi outgoing spec GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s) (AS only):
2680 2680 AS 500/2317/2 ADV 500/2337/8 Ebacc, Other
Discount codes: AS KS4 FKQ AS KS5 6050 ADV 6050 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Reading and writing PANJ1 100 50 100
A2 Unit 2 Reading and writing PANJ2 - 50 100
AS subject award PANJ1 1681 - - 100
ADV subject award PANJ1 + PANJ2 2681 - - 200
This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1681, 2681 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCE
92
Philosophy Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
2175 2175 AS 601/2680/2 ADV 601/2679/6 n/a
Discount codes: AS KS4 DE1 AS KS5 4790 ADV 4790 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Epistemology and Philosophy of Religion PHLS1 100 50 100
A2 Unit 2 Ethics and Philosophy of Mind PHLS2 - 50 100
AS subject award PHLS1 1176 - - 100
ADV subject award PHLS1 + PHLS2 2176 - - 200
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1176, 2176 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Philosophy new spec GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7171 ADV 7172 AS 603/0685/3 ADV 603/0684/1 n/a
Discount codes:
AS KS4 DE1 AS KS5 4790 ADV 4790 Entry
code
June 2019 6A19
21/2/19
AS Written paper Epistemology and moral philosophy 7171 7171 100 80
ADV Paper 1 Epistemology and moral philosophy 7172/1
7172 50 100
Paper 2 The metaphysics of God and the metaphysics of mind 7172/2 50 100
A single entry is all that is needed for examination paper(s) and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
93
Physical Education GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7581 ADV 7582 AS 601/8631/8 ADV 601/8633/1 n/a
Discount codes:
AS KS4 MA1 AS KS5 7210 ADV 7210 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS Paper Factors affecting participation in physical
activity and sport 7581/W 7581
70 84 210
NEA Practical performance in physical activity and sport 7581/C 30 90 90
ADV
Paper 1 Factors affecting participation in physical activity and sport 7582/1
7582
35 105 105
Paper 2 Factors affecting optimal performance in physical activity and sport 7582/2 35 105 105
NEA Practical performance in physical activity and sport 7582/C 30 90 90
A single entry is all that is needed for the examination paper(s), non-exam assessment and certification.
Moderator visits (1 March – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are not available to private candidates.
Entry codes 2018/19 - GCE
94
Physics GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers:
AS 7407 ADV 7408 AS 601/4746/5 ADV 601/4747/7
Discount codes: Attainment 8
(AS only):
AS KS4 RC1 AS KS5 1210 ADV 1210 measures EBacc, Other
Entry code
June 2019 6A19
21/2/19
AS Paper 1 7407/1
7407 50 70
Paper 2 7407/2 50 70
ADV
A - Astrophysics
Paper 1 7408/1
7408A
34 85
Paper 2 7408/2 34 85
Paper 3 section A section B option A
7408/3A 7408/3BA 32 45
35
Practical skills endorsement 7408/C - -
B- Medical physics
Paper 1 7408/1
7408B
34 85
Paper 2 7408/2 34 85
Paper 3 section A section B option B
7408/3A 7408/3BB 32 45
35
Practical skills endorsement 7408/C - -
C - Engineering physics
Paper 1 7408/1
7408C
34 85
Paper 2 7408/2 34 85
Paper 3 section A section B option C
7408/3A 7408/3BC 32 45
35
Practical skills endorsement 7408/C - -
D - Turning points in physics
Paper 1 7408/1
7408D
34 85
Paper 2 7408/2 34 85
Paper 3 section A section B option D
7408/3A 7408/3BD 32 45
35
Practical skills endorsement 7408/C - -
E - Electronics
Paper 1 7408/1
7408E
34 85
Paper 2 7408/2 34 85
Paper 3 section A section B option E
7408/3A 7408/3BE 32 45
35
Practical skills endorsement 7408/C - -
Continued on next page
Entry codes 2018/19 - GCE
95
Physics (continued) GCE
These specifications are not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7.
A single entry is all that is needed for examination papers, non-exam assessment (where applicable) and certification. Candidates taking the A-level qualification will only be allowed to enter one of the five options per series.
If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
The AS specification is available to private candidates. It is expected that students undertaking the AS will carry out at least the six required practical activities in section 7.2 of the specification, and private candidates should make arrangements to complete sufficient practical work to fulfil this expectation. 15% of the marks in the AS papers will relate to practical work.
The Advanced specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8.2 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCE
96
Polish outgoing spec GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s) (AS only):
2685 2685 AS 500/2316/0 ADV 500/2338/X EBacc, Other
Discount codes: AS KS4 FKO AS KS5 6070 ADV 6070 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS Unit 1 Reading and writing PLSH1 100 50 100
A2 Unit 2 Reading and writing PLSH2 - 50 100
AS subject award PLSH1 1686 - - 100
ADV subject award PLSH1 + PLSH2 2686 - - 200
This specification will be withdrawn after June 2019. A final re-sit opportunity will be available in June 2020.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (1686, 2686 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Politics new spec GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7151 ADV 7152 AS 603/1402/3 ADV 603/1403/5 n/a
Discount codes:
AS KS4 EA AS KS5 4830 ADV 4830 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 Government and politics of the UK 7151 7151 100 98
ADV
Paper 1 Government and politics of the UK 7152/1
7152
33⅓
77
Paper 2 Government and politics of the USA and comparative politics
7152/2
33⅓
77
Paper 3 Political ideas 7152/3 33⅓
77
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
97
Psychology GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7181 ADV 7182 AS 601/4837/8 ADV 601/4838/X n/a
Discount codes:
AS KS4 PK1 AS KS5 4850 ADV 4850 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 Introductory Topics in Psychology 7181/1
7181 50 72
Paper 2 Psychology in Context 7181/2 50 72
ADV
Paper 1 Introductory Topics in Psychology 7182/1
7182
33.3 96
Paper 2 Psychology in Context 7182/2 33.3 96
Paper 3 Issues and Options in Psychology 7182/3 33.3 96
A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
98
Religious Studies GCE
Series availability
Weight %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s):
AS 7061 ADV 7062 AS 601/8716/5 ADV 601/8830/3 n/a
Discount codes:
AS KS4 DD1 AS KS5 4610 ADV 4610 Entry
code
June 2019 6A19
21/2/19
AS
A Buddhism Paper 1 Philosophy of religion and
ethics 7061/1 7061A
66.7 120
Paper 2A Buddhism 7061/2A 33.3 60
B Christianity Paper 1 Philosophy of religion and
ethics 7061/1 7061B
66.7 120
Paper 2B Christianity 7061/2B 33.3 60
C Hinduism Paper 1 Philosophy of religion and
ethics 7061/1 7061C
66.7 120
Paper 2C Hinduism 7061/2C 33.3 60
D Islam Paper 1 Philosophy of religion and
ethics 7061/1 7061D
66.7 120
Paper 2D Islam 7061/2D 33.3 60
E Judaism Paper 1 Philosophy of religion and
ethics 7061/1 7061E
66.7 120
Paper 2E Judaism 7061/2E 33.3 60
ADV
A Buddhism Paper 1 Philosophy of religion and
ethics 7062/1 7062A
50 100
Paper 2A Buddhism and dialogues 7062/2A 50 100
B Christianity Paper 1 Philosophy of religion and
ethics 7062/1 7062B
50 100
Paper 2B Christianity and dialogues 7062/2B 50 100
C Hinduism Paper 1 Philosophy of religion and
ethics 7062/1 7062C
50 100
Paper 2C Hinduism and dialogues 7062/2C 50 100
D Islam Paper 1 Philosophy of religion and
ethics 7062/1 7062D
50 100
Paper 2D Islam and dialogues 7062/2D 50 100
E Judaism Paper 1 Philosophy of religion and
ethics 7062/1 7062E
50 100
Paper 2E Judaism and dialogues 7062/2E 50 100
continued on next page
Entry codes 2018/19 - GCE
99
Religious Studies (continued) GCE
Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
100
Sociology GCE
Series availability
Weighting %
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s)
AS 7191 ADV 7192 AS 601/3995/X ADV 601/3994/8 n/a
Discount codes:
AS KS4 EE2 AS KS5 4890 ADV 4890 Entry
code
June 2019 6A19
21/2/19
AS Paper 1 Education with Methods in Context 7191/1
7191 50 60
Paper 2 Research Methods and Topics in Sociology 7191/2 50 60
ADV
Paper 1 Education with Theory and Methods 7192/1
7192
33.3 80
Paper 2 Topics in Sociology 7192/2 33.3 80
Paper 3 Crime and Deviance with Theory and Methods 7192/3 33.3 80
A single entry is all that is needed for both examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates.
Entry codes 2018/19 - GCE
101
Spanish GCE
Series availability
Weight %
Max mark
Max mark
Specification codes: Qualification numbers: Attainment 8 measure(s) (AS only):
AS 7691 ADV 7692 AS 601/8730/X ADV 601/8732/3 Ebacc, Other
Discount codes:
AS KS4 FKS AS KS5 5750 ADV 5750 Entry
code
June 2019 6A19
21/2/19
raw scaled
AS
T
Paper 1 Listening, reading and writing 7691/1
7691T
45 90 90
Paper 2 Writing 7691/2 25 50 50
NEA Teacher conducted speaking test (Marked by AQA) 7691/3T 30 60 60
V
Paper 1 Listening, reading and writing 7691/1
7691V
45 90 90
Paper 2 Writing 7691/2 25 50 50
NEA Visiting examiner conducted speaking test (Marked by AQA) 7691/3V 30 60 60
ADV
T
Paper 1 Listening, reading and writing 7692/1
7692T
50 100 200
Paper 2 Writing 7692/2 20 80 80
NEA Teacher conducted speaking test (Marked by AQA) 7692/3T 30 60 120
V
Paper 1 Listening, reading and writing 7692/1
7692V
50 100 200
Paper 2 Writing 7692/2 20 80 80
NEA Visiting examiner conducted speaking test (Marked by AQA) 7692/3V 30 60 120
Candidates may enter for only one of the AS options and/or one of the Advanced options per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
Speaking tests:
• Teacher conducted options Centres must submit candidates’ speaking tests on CD or memory stick.
• Visiting examiner options Centres who request a visiting examiner must meet the requirement for a minimum of ten candidates.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
These specifications are available to private candidates provided they attend an AQA approved centre willing to make arrangements for conducting the speaking tests. For the A-level specification, that centre must also be prepared to supervise and authenticate the individual research project.
Entry codes 2018/19 - GCE
102
Statistics Final re-sit opportunity GCE
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification numbers: Attainment 8 measure(s)
6380 6380 AS 100/3491/2 ADV 100/3490/0 n/a
Discount codes: AS KS4 RB71 AS KS5 2260 ADV 2260 Entry
code
June 2019 6A19
21/2/19 AS ADV
AS
Unit 1 Option A: Statistics 1A SS1A/W Written paper
SS1A/C Coursework SS1A 33.3 16.7 100
Option B: Statistics 1B SS1B 33.3 16.7 100
Unit 2 Statistics 2 SS02 33.3 16.7 100
Unit 3 Statistics 3 SS03 33.3 16.7 100
A2
Unit 4 Statistics 4 SS04 - 16.7 100
Unit 5 Statistics 5 SS05 - 16.7 100
Unit 6 Statistics 6 SS06 - 16.7 100
AS subject award SS1A or SS1B + SS02 + SS03 5381 - - 300
ADV subject award SS1A or SS1B + SS02 + SS03 + SS04 + SS05 + SS06
6381 - - 600
This specification is available as a final re-sit only opportunity.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (5381, 6381 as appropriate) if certification is required.
Candidates re-taking unit SS1A can also carry forward marks from the previous combined GCE Mathematics and GCE Statistics coursework component MS/SS1A/C, last offered in June 2013.
Concurrent entries for SS1A and SS1B will not be accepted.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates subject to the following condition:
Unit SS1A: This unit comprises coursework and a written examination and is available only to private candidates who have already received a result for the unit, in which case the mark for the coursework component must be carried forward and the written component of the unit can be retaken.
Entry codes 2018/19 - GCE Use of Mathematics (Pilot)
103
Use of Mathematics (Pilot) Final re-sit opportunity GCE (FSM)
Series availability
Weighting %
Max UMS
Specification codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus USE & Award Basedata group codes: Data Analysis Hypothesis Testing Dynamics Principles for Finance Decision Maths Calculus USE & Award Qualification numbers: Data Analysis Hypothesis Testing Dynamics Personal Finance Decision Maths Calculus AS ADV Attainment 8 measure(s)
9993 9994 9995 9996 9997 9998 9360 9993 9994 9995 9996 9997 9998 9360 100/6449/7 500/4006/6 500/4090/X 500/4092/3 500/4007/8 500/4008/X 500/4094/7 500/4146/0 n/a
Discount codes: Data Analysis KS4 Data Analysis KS5 Hypothesis Test KS4 Hypothesis Test KS5 Dynamics KS4 Dynamics KS5 Personal Finance KS4 Personal Finance KS5 Decision Maths KS4 Decision Maths KS5 Calculus KS4 Calculus KS5 AS KS4 AS KS5 ADV
RB7F 2421 RB7I 2491 RB56 2441 RB7B 2381 RB6A 2490 RB55 2440 RB7H 2200 2200
Entry code
June 2019 6A19
21/2/19
AS A2
AS
Unit 1 USE1 Algebra USE1 33⅓ 16⅔ 100
Unit 2 and Unit 3
(Two of five FSMQ units)
FSMQ Data Analysis 9993 33⅓ 16⅔ 100
FSMQ Hypothesis Testing 9994 33⅓ 16⅔ 100
FSMQ Dynamics 9995 33⅓ 16⅔ 100
FSMQ Mathematical Principles for Personal Finance 9996 33⅓ 16⅔ 100
FSMQ Decision Mathematics 9997 33⅓ 16⅔ 100
A2
Unit 4 FSMQ Calculus 9998 - 16⅔ 100
Unit 5 USE2 Mathematical Applications Portfolio USE2 - 16⅔ 100
Unit 6 USE3 Mathematical Comprehension USE3 - 16⅔ 100
AS subject award USE1 + two from 9993, 9994, 9995, 9996, 9997 9361 - 300
ADV subject award USE1 + two from 9993, 9994, 9995, 9996, 9997 + 9998 + USE2 + USE3
9362 - 600
continued on next page
Entry codes 2018/19 - GCE Use of Mathematics (Pilot)
104
Use of Mathematics (Pilot)(continued)(final re-sit opportunity) GCE
This specification is available as a final re-sit only opportunity.
The e-AQA qualification code for units 2, 3 and 4 (the FSMQ units) is FSM. The qualification code for units 1, 5 and 6, and the AS and Advanced subject awards is GCE.
This is a pilot specification and, as such, centres will be invited to take part with the maximum number of candidates and centres participating being determined by the regulator.
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award (9361, 9362 as appropriate) if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates only at centres approved for the pilot.
Private candidates wishing to submit coursework for assessment must make arrangements for their work to be authenticated. Details of their authentication arrangements must be submitted to us using a Private candidate coursework information form at the time their entry request is made. Please see our website aqa.org.uk/private for further details.
Entry codes 2018/19 - GCSE
105
Art and Design (Art, craft and design) GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8201 601/8088/2 Other
Discount code:
JA2
Entry code
June 2019 6G19
21/2/19
Component 1 Portfolio 8201/C 8201
60 96
Component 2 Externally set assignment 8201/X 40 96
A single entry is all that is needed for non-exam assessments and certification.
Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates. Art and Design (Fine art) GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8202 601/8088/2 Other
Discount code:
JA2
Entry code
June 2019 6G19
21/2/19
Component 1 Portfolio 8202/C 8202
60 96
Component 2 Externally set assignment 8202/X 40 96
A single entry is all that is needed for non-exam assessments and certification.
Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
106
Art and Design (Graphic communication) GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8203 601/8088/2 Other
Discount code:
JA2
Entry code
June 2019 6G19
21/2/19
Component 1 Portfolio 8203/C 8203
60 96
Component 2 Externally set assignment 8203/X 40 96
A single entry is all that is needed for non-exam assessments and certification.
Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates. Art and Design (Textile design) GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8204 601/8088/2 Other
Discount code:
JA2
Entry code
June 2019 6G19
21/2/19
Component 1 Portfolio 8204/C 8204
60 96
Component 2 Externally set assignment 8204/X 40 96
A single entry is all that is needed for non-exam assessments and certification.
Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
107
Art and Design (Three-dimensional design) GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8205 601/8088/2 Other
Discount code:
JA2
Entry code
June 2019 6G19
21/2/19
Component 1 Portfolio 8205/C 8205
60 96
Component 2 Externally set assignment 8205/X 40 96
A single entry is all that is needed for non-exam assessments and certification.
Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates. Art and Design (Photography) GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8206 601/8088/2 Other
Discount code:
KJ1
Entry code
June 2019 6G19
21/2/19
Component 1 Portfolio 8206/C 8206
60 96
Component 2 Externally set assignment 8206/X 40 96
A single entry is all that is needed for non-exam assessments and certification.
Only one of the two NEA components can be carried forward in the same exam series. The other component must be re-taken.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
108
Bengali new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
Scaled Specification code: Qualification number: Attainment 8 measure(s)
8638 603/1130/7 EBacc, Other
Discount code:
FKB Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8638/LF
8638F
25 40 60
NEA Paper 2 Speaking test 8638/SF 25 60 60
Written Paper 3 Reading test 8638/RF 25 60 60
Written Paper 4 Writing test 8638/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8638/LH
8638H
25 50 60
NEA Paper 2 Speaking test 8638/SH 25 60 60
Written Paper 3 Reading test 8638/RH 25 60 60
Written Paper 4 Writing test 8638/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
109
Biology GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8461 601/8752/9 EBacc, Other
Discount code:
RH3 Entry
code
June 2019 6G19
21/2/19
Foundation Tier
Paper 1 Tier F 8461/1F 8461F
50 100
Paper 2 Tier F 8461/2F 50 100
Higher Tier
Paper 1 Tier H 8461/1H 8461H
50 100
Paper 2 Tier H 8461/2H 50 100
June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.
Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.
The following combinations of entries are not permitted in the same series:
• GCSE Biology with GCSE Combined Science: Synergy
• GCSE Biology with GCSE Combined Science: Trilogy
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Business new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8132 603/0304/9 Other
Discount code:
AA3
Entry code
June 2019 6G19
21/2/19
Paper 1 Influences of operations and HRM on business activity 8132/1
8132 50 90
Paper 2 Influences of marketing and finance on business activity 8132/2 50 90
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
110
Chemistry GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8462 601/8757/8 EBacc, Other
Discount code:
RD1 Entry
code
June 2019 6G19
21/2/19
Foundation Tier
Paper 1 Tier F 8462/1F 8462F
50 100
Paper 2 Tier F 8462/2F 50 100
Higher Tier
Paper 1 Tier H 8462/1H 8462H
50 100
Paper 2 Tier H 8462/2H 50 100
June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.
Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.
The following combinations of entries are not permitted in the same series:
• GCSE Chemistry with GCSE Combined Science: Synergy
• GCSE Chemistry with GCSE Combined Science: Trilogy
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCSE
111
Chinese (Spoken Mandarin) new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
Scaled Specification code: Qualification number: Attainment 8 measure(s)
8673 603/1210/5 EBacc, Other
Discount code:
FKC Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8673/LF
8673F
25 40 60
NEA Paper 2 Speaking test 8673/SF 25 60 60
Written Paper 3 Reading test 8673/RF 25 60 60
Written Paper 4 Writing test 8673/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8673/LH
8673H
25 50 60
NEA Paper 2 Speaking test 8673/SH 25 60 60
Written Paper 3 Reading test 8673/RH 25 60 60
Written Paper 4 Writing test 8673/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Citizenship Studies GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8100 601/8595/8 Other
Discount code:
EE31
Entry code
June 2019 6G19
21/2/19
Paper 1 8100/1 8100
50 80
Paper 2 8100/2 50 80
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCSE
112
Combined Science: Synergy (Double Award) GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8465 601/8760/8 EBacc, Other
Discount code:
RA1E Entry
code
June 2019 6G19
21/2/19
Foundation Tier
Paper 1 Tier F 8465/1F
8465F
25 100
Paper 2 Tier F 8465/2F 25 100
Paper 3 Tier F 8465/3F 25 100
Paper 4 Tier F 8465/4F 25 100
Higher Tier
Paper 1 Tier H 8465/1H
8465H
25 100
Paper 2 Tier H 8465/2H 25 100
Paper 3 Tier H 8465/3H 25 100
Paper 4 Tier H 8465/4H 25 100
June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.
Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.
The following combinations of entries are not permitted in the same series:
• GCSE Combined Science: Synergy with GCSE Combined Science: Trilogy
• GCSE Combined Science: Synergy with GCSE Biology
• GCSE Combined Science: Synergy with GCSE Chemistry
• GCSE Combined Science: Synergy with GCSE Physics
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 10 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCSE
113
Combined Science: Trilogy (Double Award) GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8464 601/8758/X EBacc, Other
Discount code:
RA1E Entry
code
June 2019 6G19
21/2/19
Foundation Tier
Paper 1: Biology 1 Tier F 8464/B/1F
8464F
16⅔ 70
Paper 2: Biology 2 Tier F 8464/B/2F 16⅔ 70
Paper 3: Chemistry 1 Tier F 8464/C/1F 16⅔ 70
Paper 4: Chemistry 2 Tier F 8464/C/2F 16⅔ 70
Paper 5: Physics 1 Tier F 8464/P/1F 16⅔ 70
Paper 6: Physics 2 Tier F 8464/P/2F 16⅔ 70
Higher Tier
Paper 1: Biology 1 Tier H 8464/B/1H
8464H
16⅔ 70
Paper 2: Biology 2 Tier H 8464/B/2H 16⅔ 70
Paper 3: Chemistry 1 Tier H 8464/C/1H 16⅔ 70
Paper 4: Chemistry 2 Tier H 8464/C/2H 16⅔ 70
Paper 5: Physics 1 Tier H 8464/P/1H 16⅔ 70
Paper 6: Physics 2 Tier H 8464/P/2H 16⅔ 70
June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.
Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.
The following combinations of entries are not permitted in the same series:
• GCSE Combined Science: Trilogy with GCSE Combined Science: Synergy
• GCSE Combined Science: Trilogy with GCSE Biology
• GCSE Combined Science: Trilogy with GCSE Chemistry
• GCSE Combined Science: Trilogy with GCSE Physics
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 10 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCSE
114
Computer Science GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8520 601/8301/9 EBacc, Other
Discount code:
CK1 Entry
code
June 2019 6G19
21/2/19
Paper 1 Computational thinking and problem solving 8520/1 8520
50 80
Paper 2 Written assessment 8520/2 50 80
A single entry is all that is needed for examination papers and certification.
In addition to the two written exams, students are required to undertake a Programming Project to demonstrate programming skills and understanding of programming. However the Programming Project will not contribute towards the students’ overall 9-1 GCSE grade. Schools are required to submit a Programming Project declaration and a sample of students work for verification by 15 May.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
115
Dance GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8236 601/8549/1 Other
Discount code:
LB1
Entry code
June 2019 6G19
21/2/19
NEA Component 1: Performance and choreography 8236/C 8236
60 80
Written Component 2: Dance appreciation 8236/W 40 80
A single entry is all that is needed for examination paper, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates, under condition that:
• candidates attend an AQA school or college which will supervise and assess the production of non-exam assessment evidence
• any other requirements concerning the administration of non-exam assessments contained within this specification are met.
Design and Technology new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8552 603/0984/2 Other
Discount code:
VF1
Entry code
June 2019 6G19
21/2/19
Written Paper 8552/W 8552
50 100
NEA 8552/C 50 100
A single entry is all that is needed for examination paper, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
116
Drama GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8261 601/8575/2 Other
Discount code:
LC11
Entry code
June 2019 6G19
21/2/19
Written Component 1: Understanding drama 8261/W
8261
40 80
NEA Component 2: Devising drama (practical) 8261/C 40 80
Externally-assessed practical Component 3: Texts in practice 8261/X 20 40
A single entry is all that is needed for examination paper, non-exam assessment, externally-assessed practical and certification.
Examiner visits (20 November – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Economics new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8136 603/0126/0 Other
Discount code:
EB
Entry code
June 2019 6G19
21/2/19
Paper 1 How markets work 8136/1 8136
50 80
Paper 2 How the economy works 8136/2 50 80
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
117
Engineering new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8852 603/0719/5 Other
Discount code:
XA1
Entry code
June 2019 6G19
21/2/19
Written paper 8852/W 8852
60 120
NEA Practical engineering 8852/C 40 80
A single entry is all that is needed for examination paper, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
118
English Language GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8700 601/4292/3 EBacc, Other
Discount code:
FK2B
Entry code
Nov 2018 BG18
4/10/18
June 2019 6G19
21/2/19
Paper 1 Explorations in Creative Reading and Writing 8700/1
8700
50 80
Paper 2 Writers’ Viewpoints and Perspectives 8700/2 50 80
NEA Spoken language (endorsement) 8700/C - -
This specification is not available to centres in Northern Ireland. For more information, see the Changes to exams section on page 7
A single entry is all that is needed for examination papers, non-exam assessment and certification.
If a candidate wishes to re-take the qualification, they may carry forward the endorsement provided the candidate has previously certified the same qualification. If a candidate has more than one previous attempt, the attempt that was used in the most recent award (including grades of ‘Not Classified’) will be carried forward. The endorsement may be carried forward across awarding bodies.
Centres must submit a non-exam assessment and fieldwork centre declaration form.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates where:
• because of the nature of the non-exam assessment (NEA), candidates are attending an AQA centre that must supervise, authenticate and assess the NEA
or
• if the candidate has certificated in a previous series, then the result for the NEA can be carried forward.
Entries for the November series will only be available to candidates who were at least 16 years old on 31 August in the same calendar year, as set out in Ofqual's GCSE subject level conditions and requirements for English Language.
Entry codes 2018/19 - GCSE
119
English Literature GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8702 601/4447/6 EBacc, Other
Discount code:
FC4
Entry code
June 2019 6G19
21/2/19
Paper 1 Shakespeare and the 19th-century Novel 8702/1 8702
40 64
Paper 2 Modern texts and poetry 8702/2 60 96
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Food Preparation and Nutrition GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8585 601/8421/8 Other
Discount code:
NH6
Entry code
June 2019 6G19
21/2/19
Written Paper 1 8585/W 8585
50 100
NEA 8585/C 50 100
A single entry is all that is needed for examination paper, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
120
French GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8658 601/8157/6 EBacc, Other
Discount code:
FKF Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8658/LF
8658F
25 40
NEA Paper 2 Speaking test 8658/SF 25 60
Written Paper 3 Reading test 8658/RF 25 60
Written Paper 4 Writing test 8658/WF 25 50
Hig
her T
ier
Written Paper 1 Listening test 8658/LH
8658H
25 50
NEA Paper 2 Speaking test 8658/SH 25 60
Written Paper 3 Reading test 8658/RH 25 60
Written Paper 4 Writing test 8658/WH 25 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Geography GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8035 601/8410/3 EBacc, Other
Discount code:
RF4
Entry code
June 2019 6G19
21/2/19
Paper 1 Living with the physical environment 8035/1
8035
35 88
Paper 2 Challenges in the human environment 8035/2 35 88
Paper 3 Geographical applications 8035/3 30 76
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must submit a non-exam assessment, fieldwork and live performance centre declaration form. The declaration may be completed following either the presentation of evidence by the candidate and questioning about the fieldwork enquiry, or by a teacher from the centre supervising the candidate's fieldwork activity. Fieldwork must take place outside school grounds on two separate occasions.
Entry codes 2018/19 - GCSE
121
German GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8668 601/8159/X EBacc, Other
Discount code:
FKG Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8668/LF
8668F
25 40
NEA Paper 2 Speaking test 8668/SF 25 60
Written Paper 3 Reading test 8668/RF 25 60
Written Paper 4 Writing test 8668/WF 25 50
Hig
her T
ier
Written Paper 1 Listening test 8668/LH
8668H
25 50
NEA Paper 2 Speaking test 8668/SH 25 60
Written Paper 3 Reading test 8668/RH 25 60
Written Paper 4 Writing test 8668/WH 25 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
122
History GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8145 601/8217/9 EBacc, Other
Discount code:
DB
Entry code
June 2019 6G19
21/2/19
Paper 1 1A Period Studies
See notes below
50 40
1B Wider World depth studies 44
Paper 2 2A Thematic Studies
50 44
2B British Depth Studies 40
Candidates may only enter for one of the entry options per series. A single entry is all that is needed for examination papers and certification.
Entry codes
These are generated as follows: • the first four characters are the specification code 8145 • the fifth character is the letter indicating a particular pair of paper 1 sections (A and B) • the sixth character is the letter indicating a particular pair of paper 2 sections (A and B)
The table below shows the entry code letter (fifth character) for each valid pair of Paper 1 sections.
Paper 1 – Period Studies and Wider World depth studies
Letter Section A Code Section A (Period Studies) title Section B
code Section B (Wider World depth
studies) title
A 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/A Conflict and tension – First
World War, 1894–1918
B 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/B Conflict and tension – the
inter-war years, 1918–1939
C 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/C Conflict and tension between
East and West, 1945–1972
D 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/D Conflict and tension in Asia,
1950–1975
E 8145/1A/A America, 1840–1895: Expansion and consolidation 8145/1B/E Conflict and tension in the Gulf
and Afghanistan, 1990–2009
F 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/A Conflict and tension - First
World War, 1894–1918
G 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/B Conflict and tension - the inter-
war years, 1918–1939
H 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/C Conflict and tension between
East and West, 1945–1972
J 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/D Conflict and tension in Asia,
1950–1975
K 8145/1A/B Germany, 1890–1945: Democracy and dictatorship 8145/1B/E Conflict and tension in the Gulf
and Afghanistan, 1990–2009
L 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/A Conflict and tension - First
World War, 1894–1918
M 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/B Conflict and tension - the inter-
war years, 1918–1939
N 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/C Conflict and tension between
East and West, 1945–1972
O 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/D Conflict and tension in Asia,
1950–1975
P 8145/1A/C Russia, 1894–1945: Tsardom and communism 8145/1B/E Conflict and tension in the Gulf
and Afghanistan, 1990–2009 continued on next page
Entry codes 2018/19 - GCSE
123
History (continued) GCSE (GCSE91)
Paper 1 – Period Studies and Wider World depth studies (continued)
Letter Section A Code Section A title Section B
code Section B title
Q 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/A Conflict and tension - First
World War, 1894–1918
R 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/B Conflict and tension - the inter-
war years, 1918–1939
S 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/C Conflict and tension between
East and West, 1945–1972
T 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/D Conflict and tension in Asia,
1950–1975
U 8145/1A/D America, 1920–1973: Opportunity and inequality 8145/1B/E Conflict and tension in the Gulf
and Afghanistan, 1990–2009
The table below shows the entry code letter (sixth character) for each valid pair of Paper 2 sections.
Paper 2 – Thematic Studies and British depth studies
Letter Section A Code Section A (Thematic Studies) title Section B
code Section B (British depth
studies) title
A 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/A
Norman England, c1066–c1100
B 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/B
Medieval England: the reign of Edward I, 1272–1307
C 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/C
Elizabethan England, c1568–1603
D 8145/2A/A Britain: Health and the people: c1000 to the present day 8145/2B/D
Restoration England, 1660–1685
E 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/A
Norman England, c1066–c1100
F 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/B
Medieval England: the reign of Edward I, 1272–1307
G 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/C
Elizabethan England, c1568–1603
H 8145/2A/B Britain: Power and the people: c1170 to the present day 8145/2B/D
Restoration England, 1660–1685
J 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/A
Norman England, c1066–c1100
K 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/B
Medieval England: the reign of Edward I, 1272–1307
L 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/C
Elizabethan England, c1568–1603
M 8145/2A/C Britain: Migration, empires and the people: c790 to the present day 8145/2B/D
Restoration England, 1660–1685
A tool to confirm the entry code for a particular set of papers and sections can be found at www.aqa.org.uk/gcsehistorycodes
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
124
Italian new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
Scaled Specification code: Qualification number: Attainment 8 measure(s)
8633 603/0985/4 EBacc, Other
Discount code:
FKX Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8633/LF
8633F
25 40 60
NEA Paper 2 Speaking test 8633/SF 25 60 60
Written Paper 3 Reading test 8633/RF 25 60 60
Written Paper 4 Writing test 8633/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8633/LH
8633H
25 50 60
NEA Paper 2 Speaking test 8633/SH 25 60 60
Written Paper 3 Reading test 8633/RH 25 60 60
Written Paper 4 Writing test 8633/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
125
Mathematics GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8300 601/4608/4 Maths, Other
Discount code:
RB1 Entry
code
Nov 2018 BG18
4/10/18
June 2019 6G19
21/2/19
Foundation tier
Paper 1 Tier F (Non-calculator) 8300/1F
8300F
33.3 80
Paper 2 Tier F (Calculator) 8300/2F 33.3 80
Paper 3 Tier F (Calculator) 8300/3F 33.3 80
Higher tier
Paper 1 Tier H (Non-calculator) 8300/1H
8300H
33.3 80
Paper 2 Tier H (Calculator) 8300/2H 33.3 80
Paper 3 Tier H (Calculator) 8300/3H 33.3 80
Candidates may enter for only one of the two tiers per series. A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entries for the November series will only be available to candidates who were at least 16 years old on 31 August in the same calendar year, as set out in Ofqual's GCSE subject level conditions and requirements for Mathematics.
Media Studies new spec GCSE (GCSE91) Series
availability Weight
%
Max mark
raw
Max mark
scaled
Specification code: Qualification number: Attainment 8 measure(s)
8572 603/2105/2 Other
Discount code:
KA2 Entry code
June 2019 6G19
21/2/19
Paper 1 Media One 8572/1
8572
35 84 84
Paper 2 Media Two 8572/2 35 84 84
NEA Creating a media product 8572/C 30 60 72
A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
126
Modern Hebrew new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
scaled Specification code: Qualification number: Attainment 8 measure(s)
8678 603/1183/6 EBacc, Other
Discount code:
F1H Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8678/LF
8678F
25 40 60
NEA Paper 2 Speaking test 8678/SF 25 60 60
Written Paper 3 Reading test 8678/RF 25 60 60
Written Paper 4 Writing test 8678/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8678/LH
8678H
25 50 60
NEA Paper 2 Speaking test 8678/SH 25 60 60
Written Paper 3 Reading test 8678/RH 25 60 60
Written Paper 4 Writing test 8678/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Music GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8271 601/8361/5 Other
Discount code:
LF1
Entry code
June 2019 6G19
21/2/19
Written Component 1: Understanding music 8271/W
8271
40 96
NEA Component 2: Performing music 8271/P 30 72
NEA Component 3: Composing music 8271/C 30 72
A single entry is all that is needed for examination paper, non-exam assessments and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates provided that the centre is able to supervise, authenticate and mark the non-exam assessments.
Entry codes 2018/19 - GCSE
127
Panjabi new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
scaled Specification code: Qualification number: Attainment 8 measure(s)
8683 603/1074/1 EBacc, Other
Discount code:
FKQ Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8683/LF
8683F
25 40 60
NEA Paper 2 Speaking test 8683/SF 25 60 60
Written Paper 3 Reading test 8683/RF 25 60 60
Written Paper 4 Writing test 8683/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8683/LH
8683H
25 50 60
NEA Paper 2 Speaking test 8683/SH 25 60 60
Written Paper 3 Reading test 8683/RH 25 60 60
Written Paper 4 Writing test 8683/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Physical Education GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8582 601/8279/9 Other
Discount code:
MA1
Entry code
June 2019 6G19
21/2/19
Paper 1 The human body and movement in physical activity and sport 8582/1
8582
30 78
Paper 2 Socio-cultural influences and well-being in physical activity and sport 8582/2 30 78
NEA Practical performance in physical activity and sport 8582/C 40 100
A single entry is all that is needed for examination papers, non-exam assessment and certification.
Examiner visits (1 March – 31 May) are arranged based on Estimated Entries. You must submit estimates to receive a visit.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - GCSE
128
Physics GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8463 601/8751/7 EBacc, Other
Discount code:
RC1 Entry
code
June 2019 6G19
21/2/19
Foundation Tier
Paper 1 Tier F 8463/1F 8463F
50 100
Paper 2 Tier F 8463/2F 50 100
Higher Tier
Paper 1 Tier H 8463/1H 8463H
50 100
Paper 2 Tier H 8463/2H 50 100
June 2019 is the first examination opportunity for pupils in Northern Ireland. For more information, see the Changes to exams section on page.7.
Candidates may only enter one tier per series. A single entry is all that is needed for examination papers and certification.
The following combinations of entries are not permitted in the same series:
• GCSE Physics with GCSE Combined Science: Synergy
• GCSE Physics with GCSE Combined Science: Trilogy
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates. Centres accepting private candidates must make provision for them to carry out all the required practical activities specified in section 8 of the specification and must submit a non-exam assessment, fieldwork and live performance centre declaration form.
Entry codes 2018/19 - GCSE
129
Polish new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
scaled Specification code: Qualification number: Attainment 8 measure(s)
8688 603/1185/X EBacc, Other
Discount code:
FKO Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8688/LF
8688F
25 40 60
NEA Paper 2 Speaking test 8688/SF 25 60 60
Written Paper 3 Reading test 8688/RF 25 60 60
Written Paper 4 Writing test 8688/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8688/LH
8688H
25 50 60
NEA Paper 2 Speaking test 8688/SH 25 60 60
Written Paper 3 Reading test 8688/RH 25 60 60
Written Paper 4 Writing test 8688/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Psychology new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8182 603/0932/5 Other
Discount code:
PK1
Entry code
June 2019 6G19
21/2/19
Paper 1 Cognition and behaviour 8182/1 8182
50 100
Paper 2 Social context and behaviour 8182/2 50 100
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
130
Religious Studies (Short Course) GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8061 601/8399/8 n/a
Discount code:
n/a Entry
code
June 2019 6G19
21/2/19
Option A: Buddhism
and Christianity
Section 1 Buddhism 8061/1
8061A
26.5 27
Section 2 Christianity 8061/2 26.5 27
Section 5 Themes 8061/5 47 48
Option B: Buddhism and Islam
Section 1 Buddhism 8061/1
8061B
26.5 27
Section 3 Islam 8061/3 26.5 27
Section 5 Themes 8061/5 47 48
Option C: Buddhism
and Judaism
Section 1 Buddhism 8061/1
8061C
26.5 27
Section 4 Judaism 8061/4 26.5 27
Section 5 Themes 8061/5 47 48
Option D: Christianity and Islam
Section 2 Christianity 8061/2
8061D
26.5 27
Section 3 Islam 8061/3 26.5 27
Section 5 Themes 8061/5 47 48
Option E: Christianity
and Judaism
Section 2 Christianity 8061/2
8061E
26.5 27
Section 4 Judaism 8061/4 26.5 27
Section 5 Themes 8061/5 47 48
Option F: Islam and Judaism
Section 3 Islam 8061/3
8061F
26.5 27
Section 4 Judaism 8061/4 26.5 27
Section 5 Themes 8061/5 47 48
A single entry is all that is needed for examination paper and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
131
Religious Studies A GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8062 601/8400/0 Other
Discount code:
DD1 4610 Entry
code
June 2019 6G19
21/2/19
Paper 1 The study of religions: beliefs, teachings and practices – two of the paper 1 options (1-7) See notes
below
25 51 25 51
Paper 2 Thematic studies – one of the paper 2 options (A or B) 50 99
Component Component code
Paper 1 options The study of religions: beliefs, teachings and practices
1 Buddhism 8062/11 2 Catholic Christianity 8062/12 3 Christianity 8062/13 4 Hinduism 8062/14 5 Islam 8062/15 6 Judaism 8062/16 7 Sikhism 8062/17
Paper 2 options Thematic studies
A Excluding textual studies 8062/2A B Including textual studies 8062/2B
Entry codes
The table below shows all the valid combinations of papers and associated entry codes.
Paper 1 combination Paper 2 option
A Excluding textual studies
B Including textual studies
1&2 Buddhism and Catholic Christianity 8062AA 8062AB 1&3 Buddhism and Christianity 8062BA 8062BB 1&4 Buddhism and Hinduism 8062CA – 1&5 Buddhism and Islam 8062DA – 1&6 Buddhism and Judaism 8062EA – 1&7 Buddhism and Sikhism 8062FA – 2&4 Catholic Christianity and Hinduism 8062GA 8062GB 2&5 Catholic Christianity and Islam 8062HA 8062HB 2&6 Catholic Christianity and Judaism 8062JA 8062JB 2&7 Catholic Christianity and Sikhism 8062KA 8062KB 3&4 Christianity and Hinduism 8062LA 8062LB 3&5 Christianity and Islam 8062MA 8062MB 3&6 Christianity and Judaism 8062NA 8062NB 3&7 Christianity and Sikhism 8062OA 8062OB 4&5 Hinduism and Islam 8062PA – 4&6 Hinduism and Judaism 8062QA – 4&7 Hinduism and Sikhism 8062RA – 5&6 Islam and Judaism 8062SA – 5&7 Islam and Sikhism 8062TA – 6&7 Judaism and Sikhism 8062UA –
continued on next page
Entry codes 2018/19 - GCSE
132
Religious Studies A (continued) GCSE (GCSE91)
Candidates may only enter for one of the entry options per series. A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
133
Religious Studies B GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8063 601/8401/2 Other
Discount code:
DD1 Entry
code
June 2019 6G19
21/2/19
Islam including religious,
philosophical and ethical
studies
Paper 1 Catholic Christianity 8063/1
8063XA
50 99
Paper 2 Section A: Islam 8063/2X
50 54
Section B: Perspectives on faith (themes) 8063/2A 48
Islam including textual studies
Paper 1 Catholic Christianity 8063/1
8063XB
50 99
Paper 2 Section A: Islam 8063/2X
50 54
Section B: Perspectives on faith (textual studies) 8063/2B 48
Judaism including religious,
philosophical and ethical
studies
Paper 1 Catholic Christianity 8063/1
8063YA
50 99
Paper 2 Section A: Judaism 8063/2Y
50 54
Section B: Perspectives on faith (themes) 8063/2A 48
Judaism including textual studies
Paper 1 Catholic Christianity 8063/1
8063YB
50 99
Paper 2 Section A: Judaism 8063/2Y
50 54
Section B: Perspectives on faith (textual studies) 8063/2B 48
Candidates may only enter for one of the entry options per series. A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
134
Combined Science: Synergy (Double Award) GCSE (GCSE91) See page 112
Combined Science: Trilogy (Double Award) GCSE (GCSE91) See page 113
Sociology new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8192 603/0798/5 Other
Discount code:
EE2
Entry code
June 2019 6G19
21/2/19
Paper 1 The sociology of families and education 8192/1 8192
50 100
Paper 2 The sociology of crime and deviance and social stratification 8192/2 50 100
A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
135
Spanish GCSE (GCSE91)
Series availability
Weight %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8698 601/8160/6 EBacc, Other
Discount code:
FKS Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8698/LF
8698F
25 40
NEA Paper 2 Speaking test 8698/SF 25 60
Written Paper 3 Reading test 8698/RF 25 60
Written Paper 4 Writing test 8698/WF 25 50
Hig
her T
ier
Written Paper 1 Listening test 8698/LH
8698H
25 50
NEA Paper 2 Speaking test 8698/SH 25 60
Written Paper 3 Reading test 8698/RH 25 60
Written Paper 4 Writing test 8698/WH 25 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Statistics new spec GCSE (GCSE91)
Series availability
Weighting %
Max mark
Specification code: Qualification number: Attainment 8 measure(s)
8382 603/1177/0 Other
Discount code:
RB71 Entry
code
June 2019 6G19
21/2/19
Foundation Tier
Paper 1 8382/1F 8382F
50 80
Paper 2 8382/2F 50 80
Higher Tier
Paper 1 8382/1H 8382H
50 80
Paper 2 8382/2H 50 80
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - GCSE
136
Urdu new spec GCSE (GCSE91)
Series availability
Weight %
Max mark
raw
Max mark
scaled Specification code: Qualification number: Attainment 8 measure(s)
8648 603/1119/8 EBacc, Other
Discount code:
FKU Entry
code
June 2019 6G19
21/2/19
Foun
datio
n Ti
er Written Paper 1 Listening test 8648/LF
8648F
25 40 60
NEA Paper 2 Speaking test 8648/SF 25 60 60
Written Paper 3 Reading test 8648/RF 25 60 60
Written Paper 4 Writing test 8648/WF 25 50 60
Hig
her T
ier
Written Paper 1 Listening test 8648/LH
8648H
25 50 60
NEA Paper 2 Speaking test 8648/SH 25 60 60
Written Paper 3 Reading test 8648/RH 25 60 60
Written Paper 4 Writing test 8648/WH 25 60 60
Candidates may only enter for one of the tiers per series. A single entry is all that is needed for examination papers, non-exam assessment and certification.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is available to private candidates.
Entry codes 2018/19 - Project
137
Level 1 Foundation Project Project (L1PJ)
Series availability
Specification code Basedata group code
7991 7991
Qualification number Discount code Attainment 8 measure(s)
600/9532/5 HC7 n/a
Entry code Jan 2019
1A19 21/10/18
June 2019 6G19
21/2/19
Level 1 Foundation Project 7991
This specification is not available to private candidates.
Level 2 Higher Project Project (L2PJ)
Series availability
Specification code Basedata group code
7992 7992
Qualification number Discount code Attainment 8 measure(s)
600/9533/7 HC7 n/a
Entry code Jan 2019
1A19 21/10/18
June 2019 6G19
21/2/19
Level 2 Higher Project 7992
This specification is not available to private candidates.
Level 3 Extended Project Project (EXPJ)
Series availability
Specification code Basedata group code
7993 7993
Qualification number Discount code Attainment 8 measure(s)
600/9534/9 HC7 n/a
Entry code Nov 2018
BG18 4/10/18
June 2019 6A19
21/2/19
Level 3 Extended Project 7993
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
138
Business: Marketing Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01020 Qualification number Discount code Attainment 8 measure(s)
601/7148/0 BA1 n/a
Jan 2019
June 2019
1 Competitive Business Environment K/506/6075 External exam 12.5
2 Marketing principles Y/506/6086 External exam 12.5
3 Customer communications D/506/6087 Centre assessed n/a* n/a* 12.5
4 Digital essentials D/506/6090 Centre assessed n/a* n/a* 12.5
5 Responsible business practices M/507/6641 Externally assessed 12.5
6 Marketing Research H/506/6088 Centre assessed n/a* n/a* 12.5
7 Stakeholder Engagement H/506/6091 Centre assessed n/a* n/a* 12.5
8 Collaborative project M/506/6076 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
139
Business: Marketing Communications Foundation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01021 Qualification number Discount code Attainment 8 measure(s)
601/7147/9 BA1 n/a
Jan 2019
June 2019
1 Competitive Business Environment K/506/6075 External exam 25
2 Marketing principles Y/506/6086 External exam 25
3 Customer communications D/506/6087 Centre assessed n/a* n/a* 25
4 Digital essentials D/506/6090 Centre assessed n/a* n/a* 25
All four units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
140
Engineering Foundation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01019 Qualification number Discount code Attainment 8 measure(s)
601/7079/7 XA1 n/a
Jan 2019
June 2019
1 Materials Technology and Science F/506/5952 External exam 25
2 Mechanical Systems H/507/6524 Externally assessed 25
4 Engineering Design D/506/6008 Centre assessed n/a* n/a* 25
5 Production & Manufacturing H/506/6009 Centre assessed n/a* n/a* 25
All four units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
141
Engineering: Design Engineering Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01018 Qualification number Discount code Attainment 8 measure(s)
601/7081/5 XA1 n/a
Jan 2019
June 2019
1 Materials Technology and Science F/506/5952 External exam 12.5
2 Mechanical Systems H/507/6524 Externally assessed 12.5
3 Mathematics for Engineers J/506/5953 External exam 12.5
4 Engineering Design D/506/6008 Centre assessed n/a* n/a* 12.5
5 Production & Manufacturing H/506/6009 Centre assessed n/a* n/a* 12.5
6 Design Visualisation Y/506/6010 Centre assessed n/a* n/a* 12.5
7 Advanced Design for Manufacture D/506/6011 Centre assessed n/a* n/a* 12.5
8 Design Engineer Project Management K/506/6013 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
142
Engineering: Mechatronic Engineering Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01016 Qualification number Discount code Attainment 8 measure(s)
601/7080/3 XA1 n/a
Jan 2019
June 2019
1 Materials Technology and Science F/506/5952 External exam 12.5
2 Mechanical Systems H/507/6524 Externally assessed 12.5
3 Mathematics for Engineers J/506/5953 External exam 12.5
4 Engineering Design D/506/6008 Centre assessed n/a* n/a* 12.5
5 Production & Manufacturing H/506/6009 Centre assessed n/a* n/a* 12.5
6 Mechatronic Project Management R/506/6023 Centre assessed n/a* n/a* 12.5
7 Mechatronic Control Systems Y/506/6024 Centre assessed n/a* n/a* 12.5
8 Programming for Engineers D/506/6025 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
143
Entertainment Technology: Video Games Art and Animation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01023 Qualification number Discount code Attainment 8 measure(s)
601/7140/6 JB61 n/a
Jan 2019
June 2019
1 Business for video games M/507/6610 External exam 16.6
3 2D games art A/507/6612 Centre assessed n/a* n/a* 16.6
4 Concept art F/507/6613 Centre assessed n/a* n/a* 16.6
5 3D environment art J/507/6614 Externally assessed 16.6
8 Games animation and VFX D/507/6618 Centre assessed n/a* n/a* 16.6
10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 16.6
All six units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
144
Entertainment Technology: Video Games Art and Design Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01024 Qualification number Discount code Attainment 8 measure(s)
601/7141/8 JB61 n/a
Jan 2019
June 2019
1 Business for video games M/507/6610 External exam 12.5
2 Digital asset management T/507/6611 External exam 12.5
3 2D games art A/507/6612 Centre assessed n/a* n/a* 12.5
4 Concept art F/507/6613 Centre assessed n/a* n/a* 12.5
5 3D environment art J/507/6614 Externally assessed 12.5
8 Games animation and VFX D/507/6618 Centre assessed n/a* n/a* 12.5
9 Level design Y/507/6620 Centre assessed n/a* n/a* 12.5
10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
145
Entertainment Technology: Video Games Art and Design Production Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01025 Qualification number Discount code Attainment 8 measure(s)
601/7142/X JB61 n/a
Jan 2019
June 2019
1 Business for video games M/507/6610 External exam 8.3
2 Digital asset management T/507/6611 External exam 8.3
3 2D games art A/507/6612 Centre assessed n/a* n/a* 8.3
4 Concept art F/507/6613 Centre assessed n/a* n/a* 8.3
5 3D environment art J/507/6614 Externally assessed 8.3
6 3D character art L/507/6615 Externally assessed 8.3
7 User interface (UI) R/507/6616 Centre assessed n/a* n/a* 8.3
8 Games animation and VFX D/507/6618 Centre assessed n/a* n/a* 8.3
9 Level design Y/507/6620 Centre assessed n/a* n/a* 8.3
10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 8.3
11 Games audio M/507/6624 Centre-assessed n/a* n/a* 8.3
12 Collaborative games development project T/507/6625 Centre assessed n/a* n/a* 8.3
All twelve units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
146
Entertainment Technology: Video Games Art and Mechanics Foundation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01022 Qualification number Discount code Attainment 8 measure(s)
601/7139/X JB61 n/a
Jan 2019
June 2019
1 Business for video games M/507/6610 External exam 25
3 2D games art A/507/6612 Centre assessed n/a* n/a* 25
5 3D environment art J/507/6614 Externally assessed 25
10 Games mechanics H/507/6622 Centre assessed n/a* n/a* 25
All four units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
147
IT: Cyber Security Foundation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01010 Qualification number Discount code Attainment 8 measure(s)
601/7124/8 XA1 n/a
Jan 2019
June 2019
1 Fundamental principles of computing Y/507/6424 External exam 25
2 Communication technologies H/507/6426 External exam 25
3 Developing and maintaining computer networks K/507/6427 Centre assessed n/a* n/a* 25
4 Network threats and vulnerabilities A/507/6433 Centre assessed n/a* n/a* 25
All four units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
148
IT: Cyber Security and Security Administration Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01009 Qualification number Discount code Attainment 8 measure(s)
601/7127/3 CN1 n/a
Jan 2019
June 2019
1 Fundamental principles of computing Y/507/6424 External exam 12.5
2 Communication technologies H/507/6426 External exam 12.5
3 Developing and maintaining computer networks K/507/6427 Centre assessed n/a** n/a** 12.5
4 Network threats and vulnerabilities A/507/6433 Centre assessed n/a** n/a** 12.5
5 Maths for computing R/507/6437 Centre assessed n/a** n/a** 12.5
6 Network and cyber security administration J/507/6435 External exam 12.5
7 Managing identity and access to systems Y/507/6438 Centre assessed n/a** n/a** 12.5
8* Programming for networking and security D/507/6439 Centre assessed n/a** n/a** 12.5
9* Computer forensic investigation R/507/6440 Centre assessed n/a** n/a** 12.5
Eight units including one of units 8 and 9 must be completed to achieve the full qualification
* Optional unit ** Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to
Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
149
IT: Networking Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01011 Qualification number Discount code Attainment 8 measure(s)
601/7128/5 CN1 n/a
Jan 2019
June 2019
1 Fundamental Principles of Computing Y/507/6424 External exam 12.5
2 Communication Technologies H/507/6426 External exam 12.5
3 Developing and Maintaining Computer Networks K/507/6427 Centre assessed n/a* n/a* 12.5
4 Supporting End Users M/507/6428 Centre assessed n/a* n/a* 12.5
5 Mathematics for Computing R/507/6437 Centre assessed 12.5
6 Network Security Management A/507/6495 External exam 12.5
7 The Internet F/507/6496 Centre assessed n/a* n/a* 12.5
8 Industrial project A/507/6464 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
150
IT: Programming Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01013 Qualification number Discount code Attainment 8 measure(s)
601/7129/7 CN1 n/a
Jan 2019
June 2019
1 Fundamental Principles of Computing Y/507/6424 External exam 12.5
2 Computer Programming F/507/6465 External exam 12.5
3 Website Technologies M/507/6476 Centre assessed n/a* n/a* 12.5
4 Mobile Applications Programming Y/507/6486 Centre assessed n/a* n/a* 12.5
5 Mathematics for Programmers Y/507/6469 External exam 12.5
6 Event Driven Programming D/507/6487 Centre assessed n/a* n/a* 12.5
7 Object Oriented Programming K/507/6489 Centre assessed n/a* n/a* 12.5
8 Industrial Project A/507/6464 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
151
IT: Scripting and App Programming Foundation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01015 Qualification number Discount code Attainment 8 measure(s)
601/7125/X CN1 n/a
Jan 2019
June 2019
1 Fundamental principles of computing Y/507/6424 External exam 25
2 Computer Programming F/507/6465 External exam 25
3 Website Technologies M/507/6476 Centre assessed n/a* n/a* 25
4 Mobile Applications Programming Y/507/6486 Centre assessed n/a* n/a* 25
All four units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
152
IT: Technical Support Foundation Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01014 Qualification number Discount code Attainment 8 measure(s)
601/7126/1 CN1 n/a
Jan 2019
June 2019
1 Fundamental principles of computing Y/507/6424 External exam 25
2 Communication technologies H/507/6426 External exam 25
3 Developing and maintaining computer networks K/507/6427 Centre assessed n/a* n/a* 25
4 Supporting end users M/507/6428 Centre assessed n/a* n/a* 25
All four units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Tech-level
153
IT: User Support Tech-level (Level 3)
Series availability
Weighting %
Specification code TVQ01012 Qualification number Discount code Attainment 8 measure(s)
601/7130/3 CN1 n/a
Jan 2019
June 2019
1 Fundamental Principles of Computing Y/507/6424 External exam 12.5
2 Communication Technologies H/507/6426 External exam 12.5
3 Developing and Maintaining Computer Networks K/507/6427 Centre assessed n/a* n/a* 12.5
4 Supporting End Users M/507/6428 Centre assessed n/a* n/a* 12.5
5 Installing and maintaining software M/507/6493 Centre assessed n/a* n/a* 12.5
6 Organisational systems security T/507/6494 External exam 12.5
7 Computer forensic investigation R/507/6440 Centre assessed n/a* n/a* 12.5
8 Industrial project A/507/6464 Centre assessed n/a* n/a* 12.5
All eight units must be completed to achieve the full qualification
*Centre assessed units must be completed by 15 May for summer verification. Grades must be uploaded to Gateway by no later than 30 June.
Centres must be approved to offer our Tech-level qualifications - approval is free of charge for Government-funded centres (schools, sixth-form colleges, further education colleges, academies and UTCs).
Full details of all of the administration arrangements relating to Tech-levels can be found in the Tech-level centre procedures guide, including
• How to apply for centre approval
• Registration of learners
• Dealing with Recognition of Prior Learning (RPL)
• How to make examination entries
• Dealing with missed examination dates
• How to appeal against an assessment, Internal Quality Assurer (IQA) or External Quality Assurer (EQA) decision
• Retention of learner work and assessment/IQA records
• Dealing with potential malpractice or maladministration
Learners are able to re-sit centre assessed units on one occasion only. They may re-sit externally assessed units on two occasions.
This specification is not available to private candidates.
Entry codes 2018/19 - Technical Award
154
Performing Arts Level 1/2 Technical Award (TA)
Series availability
Weighting %
Max UMS
Specification code Basedata group code Qualification number: Attainment 8 measure(s)
3745 3745 603/0508/3 Other
Discount code: LC11 Entry code
June 2019 6G19
21/2/19
Unit 1 Unlocking creativity Internally assessed PER1 30 90
Unit 2 The production/performance Internally assessed PER2 30 90
Unit 3 The performing arts experience Externally assessed PER3 40 120
Subject award 3746 - 300
A unit entry will not trigger certification. You will also need to make an entry for the overall subject award if certification is required.
The Department for Education (DfE) assign each qualification national discount (classification) codes on the basis of the subject area it covers - these codes are used in the calculation of school/college performance tables. Please see page 5 for information about changes to discounting and the new ‘early entry’ rule.
This specification is not available to private candidates.
Entry codes 2018/19 - Index
155
Entry code Qualification Entry description
1011 GCE Archaeology: Advanced Subsidiary Award 34
1021 GCE Classical Civilisation: Advanced Subsidiary Award 46
1101 GCE Citizenship Studies: Advanced Subsidiary Award 45
1111 GCE Anthropology: Advanced Subsidiary Award 33
1121 GCE Accounting: Advanced Subsidiary Award 32
1151 GCE Government and Politics: Advanced Subsidiary Award 72
1161 GCE Law: Advanced Subsidiary Award 80
1176 GCE Philosophy: Advanced Subsidiary Award 92
1251 GCE History of Art: Advanced Subsidiary Award 78
1350A AQA Certificate Certificate in Mathematical Studies: Option A: statistical techniques 17
1350B AQA Certificate Certificate in Mathematical Studies: Option B: critical path & risk analysis 17
1350C AQA Certificate Certificate in Mathematical Studies: Option C: Graphical techniques 17
1431 GCE Electronics: Advanced Subsidiary Award 60
1441 GCE Environmental Studies: Advanced Subsidiary Award 65
1521 GCE Information and Communication Technology: Advanced Subsidiary Award 79
1541 GCE Design and Technology: Food Technology: Advanced Subsidiary Award 53
1551 GCE Design and Technology: Product Design (3-D Design): AS Award 54
1556 GCE Design and Technology: Systems and Control Technology: AS Award 57
1561 GCE Design and Technology: Product Design (Textiles): AS Award 55
1571 GCE Media Studies: Advanced Subsidiary Award 87
1626 GCE Communication and Culture: Advanced Subsidiary Award 47
1636 GCE Bengali: Advanced Subsidiary Award 41
1676 GCE Modern Hebrew: Advanced Subsidiary Award 89
1681 GCE Panjabi: Advanced Subsidiary Award 91
1686 GCE Polish: Advanced Subsidiary Award 96
1751 GCE Creative Writing: Advanced Subsidiary Award 50
1761 GCE General Studies A: Advanced Subsidiary Award 68
1766 GCE General Studies B: Advanced Subsidiary Award 69
1776 AQA Certificate Certificate in Applied Science (Applied General): Award 16
1777 AQA Certificate Extended Certificate in Applied Science (Applied General): Award 16
1821 GCE Health and Social Care: Advanced Subsidiary Award 73
1822 GCE Health and Social Care: Advanced Subsidiary Double Award 73
1831 AQA Certificate Certificate in Applied Business (Applied General): Award 15
1832 AQA Certificate Extended Certificate in Applied Business (Applied General): Award 15
2011 GCE Archaeology: Advanced Award 34
2021 GCE Classical Civilisation: Advanced Award 46
2101 GCE Citizenship Studies: Advanced Award 45
2111 GCE Anthropology: Advanced Award 33
2121 GCE Accounting: Advanced Award 32
Entry codes 2018/19 - Index
156
Entry code Qualification Entry description
2151 GCE Government and Politics: Advanced Award 72
2161 GCE Law: Advanced Award 80
2176 GCE Philosophy: Advanced Award 92
2251 GCE History of Art: Advanced Award 78
2431 GCE Electronics: Advanced Award 60
2441 GCE Environmental Studies: Advanced Award 65
2521 GCE Information and Communication Technology: Advanced Award 79
2541 GCE Design and Technology: Food Technology: Advanced Award 53
2551 GCE Design and Technology: Product Design (3-D Design): Advanced Award 54
2556 GCE Design and Technology: Systems and Control Technology: Advanced Award 57
2561 GCE Design and Technology: Product Design (Textiles): Advanced Award 55
2571 GCE Media Studies: Advanced Award 87
2626 GCE Communication and Culture: Advanced Award 47
2636 GCE Bengali: Advanced Award 41
2676 GCE Modern Hebrew: Advanced Award 89
2681 GCE Panjabi: Advanced Award 91
2686 GCE Polish: Advanced Award 96
2751 GCE Creative Writing: Advanced Award 50
2761 GCE General Studies A: Advanced Award 68
2766 GCE General Studies B: Advanced Award 69
2821 GCE Health and Social Care: Advanced Single Award 73
2822 GCE Health and Social Care: Advanced Double Award 73
3716 AQA L1/2 Award Children’s Learning and Development: Award 19
3721 AQA L1/2 Award Fashion and Textiles: Award 19
3726 AQA L1/2 Award Food and Catering: Award 20
3731 AQA L1/2 Award Health and Social Care: Award 20
3736 AQA L1/2 Award Information Technology: Award 21
3741 AQA L1/2 Award Materials Technology: Award 21
3746 AQA L1/2 Award Performing Arts: Award 154
3751 AQA L1/2 Award Sport: Award 22
3756 AQA L1/2 Award Visual Communication: Award 23
3766 AQA L1/2 Award STEM: Award 22
4367 Func Skills Functional Mathematics: Level 1 31
4368 Func Skills Functional Mathematics: Level 2 31
47201 Func Skills Functional English: Level 1: Reading: Paper based 29
47201S Func Skills Functional English: Level 1: Reading: On-screen 29
47202 Func Skills Functional English: Level 1: Writing: Paper based 29
47202S Func Skills Functional English: Level 1: Writing: On-screen 29
47203 Func Skills Functional English: Level 1: Speaking, listening and communication 29
Entry codes 2018/19 - Index
157
Entry code Qualification Entry description
4721 Func Skills Functional English: Level 1 Award 29
47251 Func Skills Functional English: Level 2: Reading: Paper based 30
47251S Func Skills Functional English: Level 2: Reading: On-screen 30
47252 Func Skills Functional English: Level 2: Writing: Paper based 30
47252S Func Skills Functional English: Level 2: Writing: On-screen 30
47253 Func Skills Functional English: Level 2: Speaking, listening and communication 30
4726 Func Skills Functional English: Level 2 Award 30
4800 AQA Certificate Certificate in Preparation for Working Life: Short Course 18
4801 AQA Certificate Certificate in Preparation for Working Life 18
5361 GCE Mathematics: Advanced Subsidiary Award 83
5366 GCE Pure Mathematics: Advanced Subsidiary Award 83
5371 GCE Further Mathematics: Advanced Subsidiary Award 83
5381 GCE Statistics: Advanced Subsidiary Award 102
5800 PSE Personal and Social Education (QCF) 18
5930 ELC Mathematics 24
5961 ELC Science (Single award) 25
5962 ELC Science (Double award) 25
5972 ELC Step Up to English - Silver Step 24
5973 ELC Step Up to English - Gold Step 24
6361 GCE Mathematics: Advanced Award 83
6366 GCE Pure Mathematics: Advanced Award 83
6371 GCE Further Mathematics: Advanced Award 83
6381 GCE Statistics: Advanced Award 102
7036 GCE AS Geography 70
7037 GCE A-level Geography 70
7041AA GCE AS History : Paper 1 Option A + Paper 2 Option A 75
7041AB GCE AS History : Paper 1 Option A + Paper 2 Option B 75
7041AD GCE AS History : Paper 1 Option A + Paper 2 Option D 75
7041AE GCE AS History : Paper 1 Option A + Paper 2 Option E 75
7041AM GCE AS History : Paper 1 Option A + Paper 2 Option M 75
7041AS GCE AS History : Paper 1 Option A + Paper 2 Option S 75
7041BA GCE AS History : Paper 1 Option B + Paper 2 Option A 75
7041BB GCE AS History : Paper 1 Option B + Paper 2 Option B 75
7041BD GCE AS History : Paper 1 Option B + Paper 2 Option D 75
7041BE GCE AS History : Paper 1 Option B + Paper 2 Option E 75
7041BM GCE AS History : Paper 1 Option B + Paper 2 Option M 75
7041BS GCE AS History : Paper 1 Option B + Paper 2 Option S 75
7041CF GCE AS History : Paper 1 Option C + Paper 2 Option F 75
7041CG GCE AS History : Paper 1 Option C + Paper 2 Option G 75
Entry codes 2018/19 - Index
158
Entry code Qualification Entry description
7041CH GCE AS History : Paper 1 Option C + Paper 2 Option H 75
7041CJ GCE AS History : Paper 1 Option C + Paper 2 Option J 75
7041CK GCE AS History : Paper 1 Option C + Paper 2 Option K 75
7041CL GCE AS History : Paper 1 Option C + Paper 2 Option L 75
7041CN GCE AS History : Paper 1 Option C + Paper 2 Option N 75
7041CO GCE AS History : Paper 1 Option C + Paper 2 Option O 75
7041CP GCE AS History : Paper 1 Option C + Paper 2 Option P 75
7041CQ GCE AS History : Paper 1 Option C + Paper 2 Option Q 75
7041CR GCE AS History : Paper 1 Option C + Paper 2 Option R 75
7041CT GCE AS History : Paper 1 Option C + Paper 2 Option T 75
7041DC GCE AS History : Paper 1 Option D + Paper 2 Option C 75
7041DG GCE AS History : Paper 1 Option D + Paper 2 Option G 75
7041DH GCE AS History : Paper 1 Option D + Paper 2 Option H 75
7041DJ GCE AS History : Paper 1 Option D + Paper 2 Option J 75
7041DK GCE AS History : Paper 1 Option D + Paper 2 Option K 75
7041DL GCE AS History : Paper 1 Option D + Paper 2 Option L 75
7041DN GCE AS History : Paper 1 Option D + Paper 2 Option N 75
7041DO GCE AS History : Paper 1 Option D + Paper 2 Option O 75
7041DP GCE AS History : Paper 1 Option D + Paper 2 Option P 75
7041DQ GCE AS History : Paper 1 Option D + Paper 2 Option Q 75
7041DR GCE AS History : Paper 1 Option D + Paper 2 Option R 75
7041DT GCE AS History : Paper 1 Option D + Paper 2 Option T 75
7041EA GCE AS History : Paper 1 Option E + Paper 2 Option A 75
7041EB GCE AS History : Paper 1 Option E + Paper 2 Option B 75
7041ED GCE AS History : Paper 1 Option E + Paper 2 Option D 75
7041EE GCE AS History : Paper 1 Option E + Paper 2 Option E 75
7041EM GCE AS History : Paper 1 Option E + Paper 2 Option M 75
7041ES GCE AS History : Paper 1 Option E + Paper 2 Option S 75
7041FC GCE AS History : Paper 1 Option F + Paper 2 Option C 75
7041FF GCE AS History : Paper 1 Option F + Paper 2 Option F 75
7041FG GCE AS History : Paper 1 Option F + Paper 2 Option G 75
7041FH GCE AS History : Paper 1 Option F + Paper 2 Option H 75
7041FJ GCE AS History : Paper 1 Option F + Paper 2 Option J 75
7041FK GCE AS History : Paper 1 Option F + Paper 2 Option K 75
7041FL GCE AS History : Paper 1 Option F + Paper 2 Option L 75
7041FN GCE AS History : Paper 1 Option F + Paper 2 Option N 75
7041FO GCE AS History : Paper 1 Option F + Paper 2 Option O 75
7041FP GCE AS History : Paper 1 Option F + Paper 2 Option P 75
7041FQ GCE AS History : Paper 1 Option F + Paper 2 Option Q 75
Entry codes 2018/19 - Index
159
Entry code Qualification Entry description
7041FR GCE AS History : Paper 1 Option F + Paper 2 Option R 75
7041FT GCE AS History : Paper 1 Option F + Paper 2 Option T 75
7041GC GCE AS History : Paper 1 Option G + Paper 2 Option C 75
7041GF GCE AS History : Paper 1 Option G + Paper 2 Option F 75
7041GG GCE AS History : Paper 1 Option G + Paper 2 Option G 75
7041GH GCE AS History : Paper 1 Option G + Paper 2 Option H 75
7041GJ GCE AS History : Paper 1 Option G + Paper 2 Option J 75
7041GK GCE AS History : Paper 1 Option G + Paper 2 Option K 75
7041GL GCE AS History : Paper 1 Option G + Paper 2 Option L 75
7041GN GCE AS History : Paper 1 Option G + Paper 2 Option N 75
7041GO GCE AS History : Paper 1 Option G + Paper 2 Option O 75
7041GP GCE AS History : Paper 1 Option G + Paper 2 Option P 75
7041GQ GCE AS History : Paper 1 Option G + Paper 2 Option Q 75
7041GR GCE AS History : Paper 1 Option G + Paper 2 Option R 75
7041GT GCE AS History : Paper 1 Option G + Paper 2 Option T 75
7041HA GCE AS History : Paper 1 Option H + Paper 2 Option A 75
7041HB GCE AS History : Paper 1 Option H + Paper 2 Option B 75
7041HD GCE AS History : Paper 1 Option H + Paper 2 Option D 75
7041HE GCE AS History : Paper 1 Option H + Paper 2 Option E 75
7041HM GCE AS History : Paper 1 Option H + Paper 2 Option M 75
7041HS GCE AS History : Paper 1 Option H + Paper 2 Option S 75
7041JC GCE AS History : Paper 1 Option J + Paper 2 Option C 75
7041JF GCE AS History : Paper 1 Option J + Paper 2 Option F 75
7041JG GCE AS History : Paper 1 Option J + Paper 2 Option G 75
7041JH GCE AS History : Paper 1 Option J + Paper 2 Option H 75
7041JJ GCE AS History : Paper 1 Option J + Paper 2 Option J 75
7041JK GCE AS History : Paper 1 Option J + Paper 2 Option K 75
7041JL GCE AS History : Paper 1 Option J + Paper 2 Option L 75
7041JN GCE AS History : Paper 1 Option J + Paper 2 Option N 75
7041JO GCE AS History : Paper 1 Option J + Paper 2 Option O 75
7041JP GCE AS History : Paper 1 Option J + Paper 2 Option P 75
7041JQ GCE AS History : Paper 1 Option J + Paper 2 Option Q 75
7041JR GCE AS History : Paper 1 Option J + Paper 2 Option R 75
7041JT GCE AS History : Paper 1 Option J + Paper 2 Option T 75
7041KA GCE AS History : Paper 1 Option K + Paper 2 Option A 75
7041KB GCE AS History : Paper 1 Option K + Paper 2 Option B 75
7041KD GCE AS History : Paper 1 Option K + Paper 2 Option D 75
7041KE GCE AS History : Paper 1 Option K + Paper 2 Option E 75
7041KM GCE AS History : Paper 1 Option K + Paper 2 Option M 75
Entry codes 2018/19 - Index
160
Entry code Qualification Entry description
7041KS GCE AS History : Paper 1 Option K + Paper 2 Option S 75
7041LA GCE AS History : Paper 1 Option L + Paper 2 Option A 75
7041LB GCE AS History : Paper 1 Option L + Paper 2 Option B 75
7041LD GCE AS History : Paper 1 Option L + Paper 2 Option D 75
7041LE GCE AS History : Paper 1 Option L + Paper 2 Option E 75
7041LM GCE AS History : Paper 1 Option L + Paper 2 Option M 75
7041LS GCE AS History : Paper 1 Option L + Paper 2 Option S 75
7042AA GCE A-level History : Paper 1 Option A + Paper 2 Option A 77
7042AB GCE A-level History : Paper 1 Option A + Paper 2 Option B 77
7042AD GCE A-level History : Paper 1 Option A + Paper 2 Option D 77
7042AE GCE A-level History : Paper 1 Option A + Paper 2 Option E 77
7042AM GCE A-level History : Paper 1 Option A + Paper 2 Option M 77
7042AS GCE A-level History : Paper 1 Option A + Paper 2 Option S 77
7042BA GCE A-level History : Paper 1 Option B + Paper 2 Option A 77
7042BB GCE A-level History : Paper 1 Option B + Paper 2 Option B 77
7042BD GCE A-level History : Paper 1 Option B + Paper 2 Option D 77
7042BE GCE A-level History : Paper 1 Option B + Paper 2 Option E 77
7042BM GCE A-level History : Paper 1 Option B + Paper 2 Option M 77
7042BS GCE A-level History : Paper 1 Option B + Paper 2 Option S 77
7042CF GCE A-level History : Paper 1 Option C + Paper 2 Option F 77
7042CG GCE A-level History : Paper 1 Option C + Paper 2 Option G 77
7042CH GCE A-level History : Paper 1 Option C + Paper 2 Option H 77
7042CJ GCE A-level History : Paper 1 Option C + Paper 2 Option J 77
7042CK GCE A-level History : Paper 1 Option C + Paper 2 Option K 77
7042CL GCE A-level History : Paper 1 Option C + Paper 2 Option L 77
7042CN GCE A-level History : Paper 1 Option C + Paper 2 Option N 77
7042CO GCE A-level History : Paper 1 Option C + Paper 2 Option O 77
7042CP GCE A-level History : Paper 1 Option C + Paper 2 Option P 77
7042CQ GCE A-level History : Paper 1 Option C + Paper 2 Option Q 77
7042CR GCE A-level History : Paper 1 Option C + Paper 2 Option R 77
7042CT GCE A-level History : Paper 1 Option C + Paper 2 Option T 77
7042DC GCE A-level History : Paper 1 Option D + Paper 2 Option C 77
7042DG GCE A-level History : Paper 1 Option D + Paper 2 Option G 77
7042DH GCE A-level History : Paper 1 Option D + Paper 2 Option H 77
7042DJ GCE A-level History : Paper 1 Option D + Paper 2 Option J 77
7042DK GCE A-level History : Paper 1 Option D + Paper 2 Option K 77
7042DL GCE A-level History : Paper 1 Option D + Paper 2 Option L 77
7042DN GCE A-level History : Paper 1 Option D + Paper 2 Option N 77
7042DO GCE A-level History : Paper 1 Option D + Paper 2 Option O 77
Entry codes 2018/19 - Index
161
Entry code Qualification Entry description
7042DP GCE A-level History : Paper 1 Option D + Paper 2 Option P 77
7042DQ GCE A-level History : Paper 1 Option D + Paper 2 Option Q 77
7042DR GCE A-level History : Paper 1 Option D + Paper 2 Option R 77
7042DT GCE A-level History : Paper 1 Option D + Paper 2 Option T 77
7042EA GCE A-level History : Paper 1 Option E + Paper 2 Option A 77
7042EB GCE A-level History : Paper 1 Option E + Paper 2 Option B 77
7042ED GCE A-level History : Paper 1 Option E + Paper 2 Option D 77
7042EE GCE A-level History : Paper 1 Option E + Paper 2 Option E 77
7042EM GCE A-level History : Paper 1 Option E + Paper 2 Option M 77
7042ES GCE A-level History : Paper 1 Option E + Paper 2 Option S 77
7042FC GCE A-level History : Paper 1 Option F + Paper 2 Option C 77
7042FF GCE A-level History : Paper 1 Option F + Paper 2 Option F 77
7042FG GCE A-level History : Paper 1 Option F + Paper 2 Option G 77
7042FH GCE A-level History : Paper 1 Option F + Paper 2 Option H 77
7042FJ GCE A-level History : Paper 1 Option F + Paper 2 Option J 77
7042FK GCE A-level History : Paper 1 Option F + Paper 2 Option K 77
7042FL GCE A-level History : Paper 1 Option F + Paper 2 Option L 77
7042FN GCE A-level History : Paper 1 Option F + Paper 2 Option N 77
7042FO GCE A-level History : Paper 1 Option F + Paper 2 Option O 77
7042FP GCE A-level History : Paper 1 Option F + Paper 2 Option P 77
7042FQ GCE A-level History : Paper 1 Option F + Paper 2 Option Q 77
7042FR GCE A-level History : Paper 1 Option F + Paper 2 Option R 77
7042FT GCE A-level History : Paper 1 Option F + Paper 2 Option T 77
7042GC GCE A-level History : Paper 1 Option G + Paper 2 Option C 77
7042GF GCE A-level History : Paper 1 Option G + Paper 2 Option F 77
7042GG GCE A-level History : Paper 1 Option G + Paper 2 Option G 77
7042GH GCE A-level History : Paper 1 Option G + Paper 2 Option H 77
7042GJ GCE A-level History : Paper 1 Option G + Paper 2 Option J 77
7042GK GCE A-level History : Paper 1 Option G + Paper 2 Option K 77
7042GL GCE A-level History : Paper 1 Option G + Paper 2 Option L 77
7042GN GCE A-level History : Paper 1 Option G + Paper 2 Option N 77
7042GO GCE A-level History : Paper 1 Option G + Paper 2 Option O 77
7042GP GCE A-level History : Paper 1 Option G + Paper 2 Option P 77
7042GQ GCE A-level History : Paper 1 Option G + Paper 2 Option Q 77
7042GR GCE A-level History : Paper 1 Option G + Paper 2 Option R 77
7042GT GCE A-level History : Paper 1 Option G + Paper 2 Option T 77
7042HA GCE A-level History : Paper 1 Option H + Paper 2 Option A 77
7042HB GCE A-level History : Paper 1 Option H + Paper 2 Option B 77
7042HD GCE A-level History : Paper 1 Option H + Paper 2 Option D 77
Entry codes 2018/19 - Index
162
Entry code Qualification Entry description
7042HE GCE A-level History : Paper 1 Option H + Paper 2 Option E 77
7042HM GCE A-level History : Paper 1 Option H + Paper 2 Option M 77
7042HS GCE A-level History : Paper 1 Option H + Paper 2 Option S 77
7042JC GCE A-level History : Paper 1 Option J + Paper 2 Option C 77
7042JF GCE A-level History : Paper 1 Option J + Paper 2 Option F 77
7042JG GCE A-level History : Paper 1 Option J + Paper 2 Option G 77
7042JH GCE A-level History : Paper 1 Option J + Paper 2 Option H 77
7042JJ GCE A-level History : Paper 1 Option J + Paper 2 Option J 77
7042JK GCE A-level History : Paper 1 Option J + Paper 2 Option K 77
7042JL GCE A-level History : Paper 1 Option J + Paper 2 Option L 77
7042JN GCE A-level History : Paper 1 Option J + Paper 2 Option N 77
7042JO GCE A-level History : Paper 1 Option J + Paper 2 Option O 77
7042JP GCE A-level History : Paper 1 Option J + Paper 2 Option P 77
7042JQ GCE A-level History : Paper 1 Option J + Paper 2 Option Q 77
7042JR GCE A-level History : Paper 1 Option J + Paper 2 Option R 77
7042JT GCE A-level History : Paper 1 Option J + Paper 2 Option T 77
7042KA GCE A-level History : Paper 1 Option K + Paper 2 Option A 77
7042KB GCE A-level History : Paper 1 Option K + Paper 2 Option B 77
7042KD GCE A-level History : Paper 1 Option K + Paper 2 Option D 77
7042KE GCE A-level History : Paper 1 Option K + Paper 2 Option E 77
7042KM GCE A-level History : Paper 1 Option K + Paper 2 Option M 77
7042KS GCE A-level History : Paper 1 Option K + Paper 2 Option S 77
7042LA GCE A-level History : Paper 1 Option L + Paper 2 Option A 77
7042LB GCE A-level History : Paper 1 Option L + Paper 2 Option B 77
7042LD GCE A-level History : Paper 1 Option L + Paper 2 Option D 77
7042LE GCE A-level History : Paper 1 Option L + Paper 2 Option E 77
7042LM GCE A-level History : Paper 1 Option L + Paper 2 Option M 77
7042LS GCE A-level History : Paper 1 Option L + Paper 2 Option S 77
7061A GCE AS Religious Studies : Option A Buddhism 98
7061B GCE AS Religious Studies : Option B Christianity 98
7061C GCE AS Religious Studies : Option C Hinduism 98
7061D GCE AS Religious Studies : Option D Islam 98
7061E GCE AS Religious Studies : Option E Judaism 98
7062A GCE A-level Religious Studies : Option A Buddhism 98
7062B GCE A-level Religious Studies : Option B Christianity 98
7062C GCE A-level Religious Studies : Option C Hinduism 98
7062D GCE A-level Religious Studies : Option D Islam 98
7062E GCE A-level Religious Studies : Option E Judaism 98
7126 GCE AS Accounting 32
Entry codes 2018/19 - Index
163
Entry code Qualification Entry description
7127 GCE A-level Accounting 32
7131 GCE AS Business Studies 43
7132 GCE A-level Business Studies 43
7135 GCE AS Economics 59
7136 GCE A-level Economics 59
7151 GCE AS Politics 96
7152 GCE A-level Politics 96
7161 GCE AS Law 81
7162A GCE A-level Law Option A: Contract 81
7162B GCE A-level Law Option B: Human Rights 81
7171 GCE AS Philosophy 92
7172 GCE A-level Philosophy 92
7181 GCE AS Psychology 97
7182 GCE A-level Psychology 97
7191 GCE AS Sociology 100
7192 GCE A-level Sociology 100
7201 GCE A-level Art and Design: Art, craft and design 35
7202 GCE A-level Art and Design: Fine art 36
7203 GCE A-level Art and Design: Graphic communication 37
7204 GCE A-level Art and Design: Textile design 39
7205 GCE A-level Art and Design: 3-D design 40
7206 GCE A-level Art and Design: Photography 38
7236 GCE AS Dance 51
7237 GCE A-level Dance 51
7241 GCE AS Art and Design: Art, craft and design 35
7242 GCE AS Art and Design: Fine art 36
7243 GCE AS Art and Design: Graphic communication 37
7244 GCE AS Art and Design: Textile design 39
7245 GCE AS Art and Design: 3-D design 40
7246 GCE AS Art and Design: Photography 38
7261 GCE AS Drama and Theatre 58
7262 GCE A-level Drama and Theatre 58
7271 GCE AS Music 90
7272 GCE A-level Music 90
7356 GCE AS Mathematics 86
7357 GCE A-level Mathematics 86
7366DS GCE AS Further Mathematics: Discrete and Statistics 67
7366MD GCE AS Further Mathematics: Mechanics and Discrete 67
7366SM GCE AS Further Mathematics: Statistics and Mechanics 67
Entry codes 2018/19 - Index
164
Entry code Qualification Entry description
7367DS GCE A-level Further Mathematics: Discrete and Statistics 67
7367MD GCE A-level Further Mathematics: Mechanics and Discrete 67
7367SM GCE A-level Further Mathematics: Statistics and Mechanics 67
7401 GCE AS Biology 42
7402 GCE A-level Biology 42
7404 GCE AS Chemistry 44
7405 GCE A-level Chemistry 44
7407 GCE AS Physics 94
7408A GCE A-level Physics: Option A: Astrophysics 94
7408B GCE A-level Physics: Option B: Medical Physics 94
7408C GCE A-level Physics: Option C: Engineering Physics 94
7408D GCE A-level Physics: Option D: Turning Points in Physics 94
7408E GCE A-level Physics: Option E: Electronics 94
7446 GCE AS Environmental Science 65
7447 GCE A-level Environmental Science 65
7516A GCE AS Computer Science: Option A: C# 48
7516B GCE AS Computer Science: Option B: Java 48
7516C GCE AS Computer Science: Option C: Pascal/Delphi 48
7516D GCE AS Computer Science: Option D: Python 48
7516E GCE AS Computer Science: Option E: VB.Net 48
7517A GCE A-level Computer Science: Option A: C# 48
7517B GCE A-level Computer Science: Option B: Java 48
7517C GCE A-level Computer Science: Option C: Pascal/Delphi 48
7517D GCE A-level Computer Science: Option D: Python 48
7517E GCE A-level Computer Science: Option E: VB.Net 48
7551 GCE AS Design and Technology: Product Design 56
7552 GCE A-level Design and Technology: Product Design 56
7561 GCE AS Design and Technology: Fashion and Textiles 52
7562 GCE A-level Design and Technology: Fashion and Textiles 52
7571 GCE AS Media Studies 88
7572 GCE A-level Media Studies 88
7581 GCE AS Physical Education 93
7582 GCE A-level Physical Education 93
7651T GCE AS French : Option T 66
7651V GCE AS French : Option V 66
7652T GCE A-level French : Option T 66
7652V GCE A-level French : Option V 66
7661T GCE AS German : Option T 71
7661V GCE AS German : Option V 71
Entry codes 2018/19 - Index
165
Entry code Qualification Entry description
7662T GCE A-level German : Option T 71
7662V GCE A-level German : Option V 71
7691T GCE AS Spanish : Option T 101
7691V GCE AS Spanish : Option V 101
7692T GCE A-level Spanish : Option T 101
7692V GCE A-level Spanish : Option V 101
7701 GCE AS English Language 61
7702 GCE A-level English Language 61
7706 GCE AS English Language and Literature 62
7707 GCE A-level English Language and Literature 62
7711 GCE AS English Literature 63
7712A GCE A-level English Literature A: Option A: WW1 63
7712B GCE A-level English Literature A: Option B: Modern Times 63
7716AA GCE AS English Literature B: Option A & A: Drama Tragedy & Prose Tragedy 64
7716AB GCE AS English Literature B: Option A & B: Drama Tragedy & Prose Comedy 64
7716BA GCE AS English Literature B: Option B & A: Drama Comedy & Prose Tragedy 64
7716BB GCE AS English Literature B: Option B & B: Drama Comedy & Prose Comedy 64
7717AA GCE A-level English Literature B: Options A & A: Tragedy & Crime Writing 64
7717AB GCE A-level English Literature B: Options A & B: Tragedy & Political Writing 64
7717BA GCE A-level English Literature B: Options B & A: Comedy & Crime Writing 64
7717BB GCE A-level English Literature B: Options B & B: Comedy & Political Writing 64
7991 Project Level 1 Foundation Project Qualification 137
7992 Project Level 2 Higher Project Qualification 137
7993 Project Level 3 Extended Project Qualification 137
8035 GCSE Geography 120
8061A GCSE Religious Studies (Short Course) Option A: Buddhism and Christianity 130
8061B GCSE Religious Studies (Short Course) Option B: Buddhism and Islam 130
8061C GCSE Religious Studies (Short Course) Option C: Buddhism and Judaism 130
8061D GCSE Religious Studies (Short Course) Option D: Christianity and Islam 130
8061E GCSE Religious Studies (Short Course) Option E: Christianity and Judaism 130
8061F GCSE Religious Studies (Short Course) Option F: Islam and Judaism 130
8062AA GCSE Religious Studies A: Buddhism and Catholic Christianity (excluding textual studies) 131
8062AB GCSE Religious Studies A: Buddhism and Catholic Christianity (including textual studies) 131
8062BA GCSE Religious Studies A: Buddhism and Christianity (excluding textual studies) 131
8062BB GCSE Religious Studies A: Buddhism and Christianity (including textual studies) 131
8062CA GCSE Religious Studies A: Buddhism and Hinduism (excluding textual studies) 131
8062DA GCSE Religious Studies A: Buddhism and Islam (excluding textual studies) 131
8062EA GCSE Religious Studies A: Buddhism and Judaism (excluding textual studies) 131
Entry codes 2018/19 - Index
166
Entry code Qualification Entry description
8062FA GCSE Religious Studies A: Buddhism and Sikhism (excluding textual studies) 131
8062GA GCSE Religious Studies A: Catholic Christianity and Hinduism (excluding textual studies) 131
8062GB GCSE Religious Studies A: Catholic Christianity and Hinduism (including textual studies) 131
8062HA GCSE Religious Studies A: Catholic Christianity and Islam (excluding textual studies) 131
8062HB GCSE Religious Studies A: Catholic Christianity and Islam (including textual studies) 131
8062JA GCSE Religious Studies A: Catholic Christianity and Judaism (excluding textual studies) 131
8062JB GCSE Religious Studies A: Catholic Christianity and Judaism (including textual studies) 131
8062KA GCSE Religious Studies A: Catholic Christianity and Sikhism (excluding textual studies) 131
8062KB GCSE Religious Studies A: Catholic Christianity and Sikhism (including textual studies) 131
8062LA GCSE Religious Studies A: Christianity and Hinduism (excluding textual studies) 131
8062LB GCSE Religious Studies A: Christianity and Hinduism (including textual studies) 131
8062MA GCSE Religious Studies A: Christianity and Islam (excluding textual studies) 131
8062MB GCSE Religious Studies A: Christianity and Islam (including textual studies) 131
8062NA GCSE Religious Studies A: Christianity and Judaism (excluding textual studies) 131
8062NB GCSE Religious Studies A: Christianity and Judaism (including textual studies) 131
8062OA GCSE Religious Studies A: Christianity and Sikhism (excluding textual studies) 131
8062OB GCSE Religious Studies A: Christianity and Sikhism (including textual studies) 131
8062PA GCSE Religious Studies A: Hinduism and Islam (excluding textual studies) 131
8062QA GCSE Religious Studies A: Hinduism and Judaism (excluding textual studies) 131
8062RA GCSE Religious Studies A: Hinduism and Sikhism (excluding textual studies) 131
8062SA GCSE Religious Studies A: Islam and Judaism (excluding textual studies) 131
8062TA GCSE Religious Studies A: Islam and Sikhism (excluding textual studies) 131
8062UA GCSE Religious Studies A: Judaism and Sikhism (excluding textual studies) 131
8063XA GCSE Religious Studies B: Islam including religious, philosophical and ethical studies 133
8063XB GCSE Religious Studies B: Islam including textual studies 133
8063YA GCSE Religious Studies B: Judaism including religious, philosophical and ethical studies 133
8063YB GCSE Religious Studies B: Judaism including textual studies 133
8100 GCSE Citizenship Studies 111
8132 GCSE Business (new) 109
8136 GCSE Economics (new) 116
8182 GCSE Psychology (new) 129
8192 GCSE Sociology (new) 134
8201 GCSE Art and Design (Art, craft and design) 105
8202 GCSE Art and Design (Fine art) 105
Entry codes 2018/19 - Index
167
Entry code Qualification Entry description
8203 GCSE Art and Design (Graphic communication) 106
8204 GCSE Art and Design (Textile design) 106
8205 GCSE Art and Design (Three dimensional design) 107
8206 GCSE Art and Design (Photography) 107
8236 GCSE Dance 115
8261 GCSE Drama 116
8271 GCSE Music 126
8300F GCSE Mathematics : Foundation tier 125
8300H GCSE Mathematics : Higher tier 125
8360 AQA Certificate Certificate in Further Mathematics 17
8382F GCSE Statistics: Foundation tier (new) 135
8382H GCSE Statistics: Higher tier (new) 135
8461F GCSE Biology: Foundation tier 109
8461H GCSE Biology: Higher tier 109
8462F GCSE Chemistry: Foundation tier 110
8462H GCSE Chemistry: Higher tier 110
8463F GCSE Physics: Foundation tier 128
8463H GCSE Physics: Higher tier 128
8464F GCSE Combined Science: Trilogy (Double Award) Foundation tier 113
8464H GCSE Combined Science: Trilogy (Double Award) Higher tier 113
8465F GCSE Combined Science: Synergy (Double Award) Foundation tier 112
8465H GCSE Combined Science: Synergy (Double Award) Higher tier 112
8520 GCSE Computer Science 114
8552 GCSE Design and Technology (new) 115
8572 GCSE Media Studies (new) 125
8582 GCSE Physical Education 127
8585 GCSE Food Preparation and Nutrition 119
8633F GCSE Italian: Foundation tier (new) 124
8633H GCSE Italian: Higher tier (new) 124
8638F GCSE Bengali: Foundation tier (new) 108
8638H GCSE Bengali: Higher tier (new) 108
8648F GCSE Urdu: Foundation tier (new) 136
8648H GCSE Urdu: Higher tier (new) 136
8658F GCSE French: Foundation tier 120
8658H GCSE French: Higher tier 120
8668F GCSE German: Foundation tier 121
8668H GCSE German: Higher tier 121
8673F GCSE Chinese (Spoken Mandarin): Foundation tier (new) 111
8673H GCSE Chinese (Spoken Mandarin): Higher tier (new) 111
Entry codes 2018/19 - Index
168
Entry code Qualification Entry description
8678F GCSE Modern Hebrew: Foundation tier (new) 126
8678H GCSE Modern Hebrew: Higher tier (new) 126
8683F GCSE Panjabi: Foundation tier (new) 127
8683H GCSE Panjabi: Higher tier (new) 127
8688F GCSE Polish: Foundation tier (new) 129
8688H GCSE Polish: Higher tier (new) 129
8698F GCSE Spanish: Foundation tier 135
8698H GCSE Spanish: Higher tier 135
8700 GCSE English Language 118
8702 GCSE English Literature 119
8852 GCSE Engineering (new) 117
8956 FCSE Short French Short Course in Spoken Language 26
8957 FCSE Short French Short Course in Written Language 26
8958 FCSE French 26
8966 FCSE Short German Short Course in Spoken Language 27
8967 FCSE Short German Short Course in Written Language 27
8968 FCSE German 27
8971 FCSE Short Chinese (Mandarin) Short Course in Spoken Language 26
8972 FCSE Short Chinese (Mandarin) Short Course in Written Language 26
8973 FCSE Chinese (Mandarin) 26
8996 FCSE Short Spanish Short Course in Spoken Language 27
8997 FCSE Short Spanish Short Course in Written Language 27
8998 FCSE Spanish 27
9000 Bacc Baccalaureate: Overall Baccalaureate 14
9001 Bacc Baccalaureate: Enrichment Scheme 14
9361 GCE Use of Mathematics (Restricted Pilot): Advanced Subsidiary Award 103
9362 GCE Use of Mathematics (Restricted Pilot): Advanced Award 103
9993 FSMQ Data Analysis (Restricted Pilot) 28, 103
9994 FSMQ Hypothesis Testing (Restricted Pilot) 28, 103
9995 FSMQ Dynamics (Restricted Pilot) 28, 103
9996 FSMQ Maths Principles for Personal Finance (Restricted Pilot) 28, 103
9997 FSMQ Decision Mathematics (Restricted Pilot) 28, 103
9998 FSMQ Calculus (Restricted Pilot) 28, 103
ABS1 AQA Certificate Applied Business: Unit 1 15
ABS2 AQA Certificate Applied Business: Unit 2 15
ABS3 AQA Certificate Applied Business: Unit 3 15
ABS4 AQA Certificate Applied Business: Unit 4 15
ABS5 AQA Certificate Applied Business: Unit 5 15
ABS6 AQA Certificate Applied Business: Unit 6 15
Entry codes 2018/19 - Index
169
Entry code Qualification Entry description
ABS7 AQA Certificate Applied Business: Unit 7 15
ABS8 AQA Certificate Applied Business: Unit 8 15
ACCN1 GCE Accounting: Unit 1 32
ACCN2 GCE Accounting: Unit 2 32
ACCN3 GCE Accounting: Unit 3 32
ACCN4 GCE Accounting: Unit 4 32
ANTH1 GCE Anthropology: Unit 1 33
ANTH2 GCE Anthropology: Unit 2 33
ANTH3 GCE Anthropology: Unit 3 33
ANTH4 GCE Anthropology: Unit 4 33
ARCH1 GCE Archaeology: Unit 1 34
ARCH2 GCE Archaeology: Unit 2 34
ARCH3 GCE Archaeology: Unit 3 34
ARCH4 GCE Archaeology: Unit 4 34
ASC1 AQA Certificate Applied Science: Unit 1 16
ASC2 AQA Certificate Applied Science: Unit 2 16
ASC3 AQA Certificate Applied Science: Unit 3 16
ASC4 AQA Certificate Applied Science: Unit 4 16
ASC5 AQA Certificate Applied Science: Unit 5 16
ASC6A AQA Certificate Applied Science: Unit 6A 16
ASC6B AQA Certificate Applied Science: Unit 6B 16
ASC6C AQA Certificate Applied Science: Unit 6C 16
BENG1 GCE Bengali: Unit 1 41
BENG2 GCE Bengali: Unit 2 41
CIST1 GCE Citizenship Studies: Unit 1 45
CIST2 GCE Citizenship Studies: Unit 2 45
CIST3 GCE Citizenship Studies: Unit 3 45
CIST4 GCE Citizenship Studies: Unit 4 45
CIV1A GCE Classical Civilisation: Unit 1 Option A 46
CIV1B GCE Classical Civilisation: Unit 1 Option B 46
CIV1C GCE Classical Civilisation: Unit 1 Option C 46
CIV1D GCE Classical Civilisation: Unit 1 Option D 46
CIV1E GCE Classical Civilisation: Unit 1 Option E 46
CIV1F GCE Classical Civilisation: Unit 1 Option F 46
CIV2A GCE Classical Civilisation: Unit 2 Option A 46
CIV2B GCE Classical Civilisation: Unit 2 Option B 46
CIV2C GCE Classical Civilisation: Unit 2 Option C 46
CIV2D GCE Classical Civilisation: Unit 2 Option D 46
CIV2E GCE Classical Civilisation: Unit 2 Option E 46
Entry codes 2018/19 - Index
170
Entry code Qualification Entry description
CIV2F GCE Classical Civilisation: Unit 2 Option F 46
CIV3A GCE Classical Civilisation: Unit 3 Option A 46
CIV3B GCE Classical Civilisation: Unit 3 Option B 46
CIV3C GCE Classical Civilisation: Unit 3 Option C 46
CIV3D GCE Classical Civilisation: Unit 3 Option D 46
CIV4A GCE Classical Civilisation: Unit 4 Option A 46
CIV4B GCE Classical Civilisation: Unit 4 Option B 46
CIV4C GCE Classical Civilisation: Unit 4 Option C 46
CIV4D GCE Classical Civilisation: Unit 4 Option D 46
CLD1 AQA L1/2 Award Children’s Learning and Development: Unit 1 19
CLD2 AQA L1/2 Award Children’s Learning and Development: Unit 2 19
CLD3 AQA L1/2 Award Children’s Learning and Development: Unit 3 19
COMM1 GCE Communication and Culture: Unit 1 47
COMM2 GCE Communication and Culture: Unit 2 47
COMM3 GCE Communication and Culture: Unit 3 47
COMM4 GCE Communication and Culture: Unit 4 47
CREW1 GCE Creative Writing: Unit 1 50
CREW2 GCE Creative Writing: Unit 2 50
CREW3 GCE Creative Writing: Unit 3 50
CREW4 GCE Creative Writing: Unit 4 50
ELEC1 GCE Electronics: Unit 1 60
ELEC2 GCE Electronics: Unit 2 60
ELEC3 GCE Electronics: Unit 3 60
ELEC4 GCE Electronics: Unit 4 60
ELEC5 GCE Electronics: Unit 5 60
ELEC6 GCE Electronics: Unit 6 60
ENVS1 GCE Environmental Studies: Unit 1 65
ENVS2 GCE Environmental Studies: Unit 2 65
ENVS3 GCE Environmental Studies: Unit 3 65
ENVS4 GCE Environmental Studies: Unit 4 65
FDC1 AQA L1/2 Award Food and Catering: Unit 1 20
FDC2 AQA L1/2 Award Food and Catering: Unit 2 20
FDC3 AQA L1/2 Award Food and Catering: Unit 3 20
FNT1 AQA L1/2 Award Fashion and Textiles: Unit 1 19
FNT2 AQA L1/2 Award Fashion and Textiles: Unit 2 19
FNT3 AQA L1/2 Award Fashion and Textiles: Unit 3 19
FOOD1 GCE Design and Technology: Food Technology: Unit 1 53
FOOD2 GCE Design and Technology: Food Technology: Unit 2 53
FOOD3 GCE Design and Technology: Food Technology: Unit 3 53
Entry codes 2018/19 - Index
171
Entry code Qualification Entry description
FOOD4 GCE Design and Technology: Food Technology: Unit 4 53
GENA1 GCE General Studies A: Unit 1 68
GENA2 GCE General Studies A: Unit 2 68
GENA3 GCE General Studies A: Unit 3 68
GENA4 GCE General Studies A: Unit 4 68
GENB1 GCE General Studies B: Unit 1 69
GENB2 GCE General Studies B: Unit 2 69
GENB3 GCE General Studies B: Unit 3 69
GENB4 GCE General Studies B: Unit 4 69
GOV3A GCE Government and Politics: Unit 3A 72
GOV3B GCE Government and Politics: Unit 3B 72
GOV4A GCE Government and Politics: Unit 4A 72
GOV4B GCE Government and Politics: Unit 4B 72
GOVP1 GCE Government and Politics: Unit 1 72
GOVP2 GCE Government and Politics: Unit 2 72
HART1 GCE History of Art: Unit 1 78
HART2 GCE History of Art: Unit 2 78
HART3 GCE History of Art: Unit 3 78
HART4 GCE History of Art: Unit 4 78
HLT1 AQA L1/2 Award Health and Social Care: Unit 1 20
HLT2 AQA L1/2 Award Health and Social Care: Unit 2 20
HLT3 AQA L1/2 Award Health and Social Care: Unit 3 20
HSC01 GCE Health and Social Care Unit 1 73
HSC02 GCE Health and Social Care Unit 2 73
HSC03 GCE Health and Social Care Unit 3 73
HSC04 GCE Health and Social Care Unit 4 73
HSC05 GCE Health and Social Care Unit 5 73
HSC06 GCE Health and Social Care Unit 6 73
HSC07 GCE Health and Social Care Unit 7 73
HSC08 GCE Health and Social Care Unit 8 73
HSC09 GCE Health and Social Care Unit 9 73
HSC10 GCE Health and Social Care Unit 10 73
INF1 AQA L1/2 Award Information Technology: Unit 1 21
INF2 AQA L1/2 Award Information Technology: Unit 2 21
INF3 AQA L1/2 Award Information Technology: Unit 3 21
INFO1 GCE Information and Communication Technology: Unit 1 79
INFO2 GCE Information and Communication Technology: Unit 2 79
INFO3 GCE Information and Communication Technology: Unit 3 79
INFO4 GCE Information and Communication Technology: Unit 4 79
Entry codes 2018/19 - Index
172
Entry code Qualification Entry description
LAW01 GCE Law: Unit 1 80
LAW02 GCE Law: Unit 2 80
LAW03 GCE Law: Unit 3 80
LAW04 GCE Law: Unit 4 80
MAT1 AQA L1/2 Award Materials Technology: Unit 1 21
MAT2 AQA L1/2 Award Materials Technology: Unit 2 21
MAT3 AQA L1/2 Award Materials Technology: Unit 3 21
MD01 GCE Mathematics: Unit MD01 82
MD02 GCE Mathematics: Unit MD02 82
MEST1 GCE Media Studies: Unit 1 87
MEST2 GCE Media Studies: Unit 2 87
MEST3 GCE Media Studies: Unit 3 87
MEST4 GCE Media Studies: Unit 4 87
MFP1 GCE Mathematics: Unit MFP1 82
MFP2 GCE Mathematics: Unit MFP2 82
MFP3 GCE Mathematics: Unit MFP3 82
MFP4 GCE Mathematics: Unit MFP4 82
MHEB1 GCE Modern Hebrew: Unit 1 89
MHEB2 GCE Modern Hebrew: Unit 2 89
MM03 GCE Mathematics: Unit MM03 82
MM04 GCE Mathematics: Unit MM04 82
MM05 GCE Mathematics: Unit MM05 82
MM1B GCE Mathematics: Unit MM1B 82
MM2B GCE Mathematics: Unit MM2B 82
MPC1 GCE Mathematics: Unit MPC1 82
MPC2 GCE Mathematics: Unit MPC2 82
MPC3 GCE Mathematics: Unit MPC3 82
MPC4 GCE Mathematics: Unit MPC4 82
MS03 GCE Mathematics: Unit MS03 82
MS04 GCE Mathematics: Unit MS04 82
MS1A GCE Mathematics: Unit MS1A 82
MS1B GCE Mathematics: Unit MS1B 82
MS2B GCE Mathematics: Unit MS2B 82
PANJ1 GCE Panjabi: Unit 1 91
PANJ2 GCE Panjabi: Unit 2 91
PER1 Tech Award Performing Arts: Unit 1 154
PER2 Tech Award Performing Arts: Unit 2 154
PER3 Tech Award Performing Arts: Unit 3 154
PHLS1 GCE Philosophy: Unit 1 92
Entry codes 2018/19 - Index
173
Entry code Qualification Entry description
PHLS2 GCE Philosophy: Unit 2 92
PLSH1 GCE Polish: Unit 1 96
PLSH2 GCE Polish: Unit 2 96
PROD1 GCE Design and Technology: Product Design (3-D Design): Unit 1 54
PROD2 GCE Design and Technology: Product Design (3-D Design): Unit 2 54
PROD3 GCE Design and Technology: Product Design (3-D Design): Unit 3 54
PROD4 GCE Design and Technology: Product Design (3-D Design): Unit 4 54
SPT1 AQA L1/2 Award Sport: Unit 1 22
SPT2 AQA L1/2 Award Sport: Unit 2 22
SPT3 AQA L1/2 Award Sport: Unit 3 22
SS02 GCE Statistics: Unit 2 102
SS03 GCE Statistics: Unit 3 102
SS04 GCE Statistics: Unit 4 102
SS05 GCE Statistics: Unit 5 102
SS06 GCE Statistics: Unit 6 102
SS1A GCE Statistics: Unit 1A 102
SS1B GCE Statistics: Unit 1B 102
STM1 AQA L1/2 Award STEM: Unit 1 22
STM2 AQA L1/2 Award STEM: Unit 2 22
STM3 AQA L1/2 Award STEM: Unit 3 22
SYST1 GCE Design and Technology: Systems and Control Technology: Unit 1 57
SYST2 GCE Design and Technology: Systems and Control Technology: Unit 2 57
SYST3 GCE Design and Technology: Systems and Control Technology: Unit 3 57
SYST4 GCE Design and Technology: Systems and Control Technology: Unit 4 57
TEXT1 GCE Design and Technology: Product Design (Textiles): Unit 1 55
TEXT2 GCE Design and Technology: Product Design (Textiles): Unit 2 55
TEXT3 GCE Design and Technology: Product Design (Textiles): Unit 3 55
TEXT4 GCE Design and Technology: Product Design (Textiles): Unit 4 55
TVQ01009 Tech-level IT: Cyber Security and Security Administration 148
TVQ01010 Tech-level IT: Cyber Security (Foundation) 147
TVQ01011 Tech-level IT: Networking 149
TVQ01012 Tech-level IT: User Support 153
TVQ01013 Tech-level IT: Programming 150
TVQ01014 Tech-level IT: Technical Support (Foundation) 152
TVQ01015 Tech-level IT: Scripting and App Programming (Foundation) 151
TVQ01016 Tech-level Engineering: Mechatronic Engineering 142
TVQ01018 Tech-level Engineering: Design Engineering 141
TVQ01019 Tech-level Engineering (Foundation) 140
TVQ01020 Tech-level Business: Marketing 138
Entry codes 2018/19 - Index
174
Entry code Qualification Entry description
TVQ01021 Tech-level Business: Marketing Communications (Foundation) 139
TVQ01022 Tech-level Entertainment Technology: Video Games Art and Mechanics (Foundation) 146
TVQ01023 Tech-level Entertainment Technology: Video Games Art and Animation 143
TVQ01024 Tech-level Entertainment Technology: Video Games Art and Design 144
TVQ01025 Tech-level Entertainment Technology: Video Games Art and Design Production 145
USE1 GCE Use of Mathematics (Restricted Pilot): Algebra 103
USE2 GCE Use of Mathematics (Restricted Pilot): Mathematical Applications 103
USE3 GCE Use of Mathematics (Restricted Pilot): Mathematical Comprehension 103
VIS1 AQA L1/2 Award Visual Communication: Unit 1 23
VIS2 AQA L1/2 Award Visual Communication: Unit 2 23
VIS3 AQA L1/2 Award Visual Communication: Unit 3 23
aqa.org.uk
Copyright © AQA and its licensors. All rights reserved. AQA Education (AQA) is a registered charity (registered charity number 1073334) and a company limited by guarantee registered in England and Wales (company number 3644723). Registered address: AQA, Devas Street, Manchester M15 6EX.
November 2018 G02018a
Entry codes 2018/19All exam series
This document lists the entry codes for all series in the 2018/19 academic year. Any updates will be posted on the Exams administration/Entries page of our website aqa.org.uk
Issued November 2018 v1.1
Entry codes 2018/19