enviromax solar powered solution - maxon telemetry

2
Powered by the intelligence of Maxon’s exclusive Smartmax HSPA Smart Modem, the Enviromax controller is a cost-effective telemetry solution for M2M applications requiring supervisory and control of data equipment over the 3G network. Leveraging off the brains of the Smartmax Modem, the control flexibility of the Smartmax I/O Board, and it’s internal battery power, the Enviromax is impressively fully featured – including 6 digital inputs, 4 digital outputs, 2 analog inputs, 1 pulse input port, reporting using DNP3 or via SMS through programming of the digital inputs and outputs and much more. All this encased in a robust IP66 rated enclosure for challenging environmental conditions. Combine this enclosure with the solar panel option for your complete low cost RTU solution which can be easily interfaced with any M2M application without requiring any additional power supply or charging circuitry. Without requiring costly and time-consuming changes to your existing application setup, the Enviromax can be easily integrated. Ideally designed and developed for communications devices that require remote monitoring and control in M2M applications, the cost-effective Enviromax is an all-in-one smart telemetry solution. 210812 M2M HSPA Smart Telemetry Solution: MA-3010S FOR COMPREHENSIVE CONTROL OF YOUR M2M APPLICATION, THE ENVIROMAX IS A COMPLETE INTELLIGENT TELEMETRY PACKAGE TO ADVANCE & POWER YOUR INDUSTRIAL APPLICATION. Enviromax Features Compatible with any wireless operator in Australia HSPA, GSM, GPRS, EDGE compatible 6 Digital Inputs 4 Digital Outputs 2 Analog Inputs 1 Pulse Input Supports DNP3 reporting SMS reporting and Control Configurable via Web Interface Optional Solar Panel, Backup Battery and mounting brackets SDK (Software Development Kit) is available for the Smartmax HSPA Modem (Product Code: MA-2010S) CHOOSE WELL... CHOOSE WISELY... CHOOSE MAXON...

Upload: maxon-data-communications

Post on 27-Jun-2015

47 views

Category:

Technology


0 download

DESCRIPTION

Enviromax controller is economice telemetry solution for M2M applications. Requires requires supervision and control of data equipment over the 3G network. Browse www.maxon.com.au for futher details

TRANSCRIPT

Page 1: Enviromax Solar Powered Solution - Maxon Telemetry

Powered by the intelligence of Maxon’s exclusive Smartmax HSPA Smart Modem, the Enviromax controller is a cost-effective telemetry solution for M2M applications requiring supervisory and control of data equipment over the 3G network.

Leveraging off the brains of the Smartmax Modem, the control flexibility of the Smartmax I/O Board, and it’s internal battery power, the Enviromax is impressively fully featured – including 6 digital inputs, 4 digital outputs, 2 analog inputs, 1 pulse

input port, reporting using DNP3 or via SMS through programming of the digital inputs and outputs and much more. All this encased in a robust IP66 rated enclosure for challenging environmental conditions.

Combine this enclosure with the solar panel option for your complete low cost RTU solution which can be easily interfaced with any M2M application without requiring any additional power supply or charging circuitry.

Without requiring costly and time-consuming changes to your existing application setup, the Enviromax can be easily integrated. Ideally designed and developed for communications devices that require remote monitoring and control in M2M

applications, the cost-effective Enviromax is an all-in-one smart telemetry solution.

2108

12

M2M HSPA Smart Telemetry Solution: MA-3010S

FOR COMPREHENSIVE CONTROL OF YOUR M2M APPLICATION, THE ENVIROMAX IS A COMPLETE INTELLIGENT TELEMETRY PACKAGE TO ADVANCE & POWER YOUR

INDUSTRIAL APPLICATION.

Enviromax Features• Compatiblewithanywirelessoperatorin Australia

• HSPA,GSM,GPRS,EDGEcompatible

• 6DigitalInputs

• 4DigitalOutputs

• 2AnalogInputs

• 1PulseInput

• SupportsDNP3reporting

• SMSreportingandControl

• ConfigurableviaWebInterface

• OptionalSolarPanel,BackupBatteryand mounting brackets

• SDK(SoftwareDevelopmentKit)isavailablefor the SmartmaxHSPAModem(ProductCode: MA-2010S)

CHOOSE WELL... CHOOSE WISELY... CHOOSE MAXON...

Page 2: Enviromax Solar Powered Solution - Maxon Telemetry

www.maxon.com.au

Frequency Bands•WCDMA/HSPA850MHz,900MHz,1900MHz,2100MHz

•GSM/GPRS/EDGE850MHz,900MHz,1800MHzand1900MHz

Metering

Water

Road Signs

Power

Security

Transport

T | +612 8707 3000 ● F | +612 8707 3001 ● E | [email protected] ● 36A Gibson Avenue, Padstow NSW Australia 2211 ● www.maxon.com.au

M2M HSPA Smart Telemetry Solution: MA-3010S

GeneralSpecifications-Smartmax HSPA Modem (MA-2010)

•PacketData

•2WaySMS

•RemoteSMSdiagnostics&reset

•EmbeddedTCP/IP,UDP/IPSTACK

•In-builtperiodicreset

•SupportVPNServerandClientMode

•DynamicDNS

•SupportsDNP3(Outstation)usingextensionI/Oboard

•In-BuiltWebInterface

•ProgrammableschedulertocontrolWANconnection

•Telnetsupport

•Saveandrestoremodemconfigurationfromafile

•FOTA-Firmwareupgradeovertheair

•ExternalantennaconnectivitytomaximiseHSPAcoverage

Enviromax Optional/Additional Accessories:•SolarPanel,SmartmaxBoard,I/OBoard,I/OCable

Package includes: Enviromax Enclosure Only

Package includes: Enviromax Enclosure + Solar

Panel + Bracket & Arm

ProductContentFeatures:•MountingARMandBracket(galvanized)

•IP 66 enclosure

•20W solar panel

•Smartmax interface board

•I/O board

•2 X 12V 7AH battery

•Connection terminals

GeneralSpecifications-Smartmax I/O Board (MA-4020) 6 Digital Inputs Characteristics

· VIH(Inputvoltagehighrange):2~24V

· VIL(Inputvoltagelowrange):-2~0.8V

· Ri(Inputimpedance):morethan5kΩ

· Rd(Internalpull-up):47kΩforshorttogrounddetection

· InputchattersarefilteredbyS/Wsetting

1 Pulse at Input 0

· Frequencyrange0~1000Hz

· Accuracy(25°C)0.05%ofspan

· Temperaturestability 0.005%/°C

· Inputimpedance47kΩ

4 Digital Outputs

· MOSFET switch to ground

· Ro(Outputresistance):lessthan300mΩ

· VOpen(maximumallowedoutputvoltageonopen):24VDC

· IOut(maximumallowedswitchingcurrenttoground):1A

· Switching time < 10 msec

· Chatter free

 

· 2 Analog Inputs

· 12bit resolution

· Accuracy:Typical±0.25%;WorstCase ±1%

· Maximumsamplingrate:10sample/sec

· Inputsignaltype:oneof0~20mA,0~5V,or0~10V

· (Theinputtypeisselectedbythejumper“PULSE”onthe connectedSmartmaxandINPUT#ontheI/Oboard)

· Inputimpedanceforthesignaltype0~20mA<100Ω

· Inputimpedanceforthesignaltype0~10VDC>10KΩ

==

+

+ +

+ +

PAC

KAG

E 1

PAC

KAG

E 2

SmartmaxHSPA Modem

SmartmaxI/O Board

20w SolarPanel Mounting

Bracket& Arm

2 x 12v 7AHBatteries

IP66Rated

Enclosure

Prod

uctC

ode:M

A-301

0SL

Prod

uctC

ode:M

A-301

0SC

Enviromax Product Options

A mini usb cable is required for first time purchasers of the Smartmax, as most of the programming can only be done via the web interface. This is available in the Smartmax Complete Package (MA-2010C), the Smartmax SDK (MA-7000), and separately. Speak to your Maxon Account Manager for more information.