environmental product declaration · steni as the norwegian epd foundation the norwegian epd...
TRANSCRIPT
1114
in accordance with ISO 14025 ISO 21930 and EN 15804Owner of the declarationProgram operatorPublisherDeclaration numberECO EPD RefNoIssue dateValid to
wwwepd-norgeno
ENVIRONMENTAL PRODUCT DECLARATION
Steni Nature and Steni Imago facade panel
Ver 4 2014
Steni AS
Steni ASThe Norwegian EPD Foundation The Norwegian EPD Foundation NEPD00096E Rev 1 000000830102201401022019 (validity extended to 01092020)
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 1
xxxx
General information
Steni AS
Manufacturer
Steni ASContact person Tor Unneberg
Phone +47 23 08 80 00 Phonee-mail postepd-norgeno e-mail
Place of production
Management system
CEN Standard EN 15804 serve as core PCR
Org No
Declared unit with option
Torhildur KristjansdottirSINTEF Building and infrastructure
Year of study
Declared unit
kg CO2 -eqv
A41
1 m2 of Steni Nature faccedilade panel top layer white marble
Post Box 5250 Majorstuen 0303 Oslo
Declaration number
Owner of the declaration
+47 33 15 56 00torstenino
NEPD 0096E rev1
Product category rules (PCR) of Building boards NPCR 010
ISO 90012008 Approval No00022
Kari Soslashrnes SINTEF Building and infrastructure Dr ing Sverre Fossdal
A1 - A314
141MJ
Steni Nature faccedilade panel with white marble Imago
type M
Approved according to ISO14025 814
Product
Program holder
(Independent verifier approved by EPD Norway)
01022014
internally
Comparability
EPD of construction products may not be comparable if they not comply with EN 15804 and seen in a the building context
Independent verification of data and other environmental information has been carried out in accordance with ISO14025 813
2013
Laringgendalsveien 2633 3277 Stensholt Norway
NO 944012044
1 m2 Steni Nature faccedilade panel top layer white marble with a service life of 60 years
Issue date
This declaration is based on Product Category Rules
Declared unit
externally
Functional unit Valid to01022019 (validity extended to 01092020)
114
Central warehouse is the production site
The product contains no substances from the REACH Candidate list or the Norwegian priority list
1 m2 of Steni Nature faccedilade panel top layer white marble
Key environmental indicatorsGlobal warmingEnergy useDangerous substances
Verification
--
TransportA41
MJMJ
Renewable energyNon renewable energy
The environmental product declaration has been
worked out by
Cradle to gateUnit
(Chairman of the Verification Group of EPD-Norway)
The Norwegian EPD Foundation
27
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 2
xxxx
ProductTechnical data
Market
Product specification Reference service life
MaterialsPolymer FillersChemical additivesCrushed stone Fiber glassTop layer - white marmour
LCA Calculation rulesSystem boundary
Data quality Cut-off criteria
Allocation
Declared unit with option
kg182 12 424
1 m2 Steni Nature faccedilade panel top layer white marble with a service life of 60 years
The analysis includes steps A1-A3 scenario for A4 A5 B2 C2 and C4 as shown in flow chart
420 27
Europe
The panel has Sintef Technical approval TG 2165
500 32
27 005 03
Product description
Steni Nature faccedilade panel is an exterior wall cladding system The panel comes with different types of top layer both stone type colour and roughness
The panel is 14 mm thick and the weight is average 15 kg m2
3 045
The data for the production is gathered from Steni and is of good quality For background data the Ecoinvent database v22 is used and is considered to be representative
60 years
All major raw materials and all the essential energy is included The production process for raw materials and energy flows that are included with very small amounts (lt1) are not included This cut-off rule does not apply for hazardous materials and substances
The allocation is made in accordance with the provisions of
EN 15804 Incoming energy and water and waste production in-house production is allocated equally among all products through mass allocation Effects of primary production of recycled materials allocated to the main product in which the material was used The recycling process and transportation of the material is allocated to this analysis
Raw materials
ProductionEnergyWaste
PackingWoodPlasticCard board
Installation at the construction siteScenario electricity
End of lifeWaste to landfill
Transport
Transport
Tran
spor
t
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 3
xxxx
LCA Scenarios and additional technical information
Truck 16-32 tonne ltkm
Additional information
Installation in the building (A5) End of Life (C1 C3 C4)
Auxiliary Hazardous waste disposedWater consumption Collected as mixed construction wasteElectricity consumption ReuseOther energy carriers RecyclingMaterial loss Energy recoveryOutput materials from waste treatment To landfillDust in the air
Transport to waste processing (C2)
Truck 16-32 tonne ltkm
LCA Results
System boundaries (X=included MND=module not declared MNR=module not relevant)
kg
15
kg
Value
FuelEnergy consumption
kg
Value (lt)
005
MNR
Lorry (Euro 4)
Type
Type
Transport to central warehouse in Norway is set to 0 km since the central warehouse is at the production location
Product stage
C4
MND
Beyond the system
boundaries
B2
Mai
nten
ance
B6
Lorry (Euro 4) 50
End of life stage
B3
MNR MNRMNR
Was
te p
roce
ssin
g
B7
kg
MNR
Use stage
Ope
ratio
nal w
ater
use
B4
kg
De-
cons
truct
ion
dem
oliti
on
C1
Rep
air
Rep
lace
men
t
Distance km
50
C2
Tran
spor
t
Use
Ref
urbi
shm
ent
B5
Capacity utilisation (incl return)
Type of vehicle
A1
X XMND MND
C3
The results from the EPD show that the largest contribution of the environmental impact is the production of raw materials A1 Less then 1 of the GWP is due to the production of the top layer material Also transport A2 is a significant share of the environmental load
Man
ufac
turin
g
Tran
spor
t
Raw
mat
eria
ls
A2
MNR
D
Dis
posa
l
Reu
se-R
ecov
ery-
Rec
yclin
g-po
tent
ial
kgkg
Ope
ratio
nal e
nerg
y us
e
Tran
spor
t
Con
stru
ctio
n in
stal
latio
n st
age
B1A3 A4 A5
Construction installation stage
kgm3
kg
Distance km FuelEnergy consumption
Capacity utilisation (incl return)
Type of vehicleTransport from production place to user (A4)
kg
Unit
kWhMJ
50
Unit Value
The following information describe the scenarios in the different modules of the EPD
300
Value (lt)
MNRXX XXX
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 4
xxxx
Environmental impact
Resource useParameter
End of life - WasteParameter
End of life - Output flowParameter
Reading example 90 E-03 = 9010-3 = 0009
4435
210E-01
A2
234E-04
069
297E-05
009
1189 045
A3 A1-A3
700811443 0000234
103
A4
C4004
476E-04 139E-03
GWP Global warming potential (kg CO2-eqv) ODP Depletion potential of the stratospheric ozone layer (kg CFC11-eqv) POCP Formation potential of tropospheric photochemical oxidants (kg C2H4-eqv) AP Acidification potential of land and water (kg SO2-eqv) EP Eutrophication potential (kg PO4
3--eqv) ADPM Abiotic depletion potential for non fossil resources (kg Sb -eqv) ADPE Abiotic depletion potential for fossil resources (MJ)
326E-07 165E-08 104E-07
205E-04124E-02 221E-03
C2
659E-04 171E-03
239E-07
755E-05626E-04
021
208
285E-07
179E-02
474E-06
639E-10
001
401E-03143E-03318E-02 940E-03
298E-04336E-03
A1
388E-06 834E-08
038
159E-02
GWPA4 A5
181E-06
234E-04
125E-04
556E-07
914E-04 358E-03
171E-03
C2
MER
C4
811E-05
657E-04
769E-04
A4
659E-04
640E-03
4231
009
A1-A3
NRSF
A1-A31189
A5
000
EEE
CR
ETE
179E-02
A1
99E-11
003 004
1500
A5
196E-08
A5 C2 C4
151E-05
C2 C4
170E-03
003
22052795
207E-07
POCP
A4
EPAP
012
213
001
045
4207 288E-02
018
168E-06
4410
A10181462
003 221E+00
352E-08
MR
1165
A2
02111418
A3
HW Hazardous waste disposed (kg) NHW Non hazardous waste disposed (kg) RW Radioactive waste disposed (kg)
CR Components for reuse (kg) MR Materials for recycling (kg) MER Materials for energy recovery (kg) EEE Exported electric energy (MJ) ETE Exported thermal energy ( MJ)
003
1462 2695NRPENRPMTRPE
1401898E-07574E-03419E-02148E-02337E-05
2695
Parameter A1-A3
7008
TPE
028A3
022
NHWRW
W
A2
A2A1
047
RPEE Renewable primary energy resources used as energy carrier (MJ) RPEM Renewable primary energy resources used as raw materials (MJ) TPE Total use of renewable primary energy resources (MJ) NRPE Non renewable primary energy resources used as energy carrier (MJ) NRPM Non renewable primary energy resources used as materials (MJ) TRPE Total use of non renewable primary energy resources (MJ) SM Use of secondary materials (kg) RSF Use of renewable secondary fuels (MJ) NRSF Use of non renewable secondary fuels (MJ) W Use of net fresh water (m3)
150
RSF
HW
ADPM
ODP
171E-02 415E-03 024 432E-05
SM
A3
ADPE
RPEERPEM
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 5
xxxx
Specific Norwegian requirements
Electricity
kg CO2 - eqvMJ
Dangerous substances
Bibliography
PCR2007
LCA -Report
Publisher Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoProgram holder Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoOwner of the declaration Phone +47 33 15 56 00Steni AS FaxBerganmoen 3277 Steinsholt Lardal e-mail infosteninoNorway web wwwsteninoAuthor of the Life Cycle Assessment PhoneTorhildur Kristjansdottir FaxSintef Building and Infrastructure e-mail torhildurkristjansdottirsintefnoForskningsveien 3 B 0314 Oslo Norway web wwwsintefnobyggforsk
Product category rules for preparing an environmental declaration for building boards NPCR 010
11
The electricity used in the Production phase (A3) at Stensholt near Larvik in Norway is based on a factor of 392 grams CO2
eq kWh (Electricity medium voltage supply mix Norway 2007-2011)
+47 94 29 74 33
LCA- Report for environmental product declarations for Steni faccedilade panels ndash both Colour and
Nature Torhildur Kristjansdottir Sintef Building and Infrastrucutre November 2013
ISO 140442006
EN 158042012
ISO 219302007
None of the following substances have been added to the product Substances on the REACH Candidate list of substances of very high concern (of 01022014) substances on the Norwegian Priority list (of01022014) and substances that lead to the product being classified as hazardous waste The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations
Greenhouse gas emissions
Environmental labels and declarations - Type III environmental declarations - Principles and
procedures
Environmental management - Life cycle assessment - Requirements and guidelines
Sustainability of construction works - Environmental product declaration - Core rules for the
product category of construction products
Sustainability in building construction - Environmental declaration of building products
ISO 140252006
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 6
xxxx
General information
Steni AS
Manufacturer
Steni ASContact person Tor Unneberg
Phone +47 23 08 80 00 Phonee-mail postepd-norgeno e-mail
Place of production
Management system
CEN Standard EN 15804 serve as core PCR
Org No
Declared unit with option
Torhildur KristjansdottirSINTEF Building and infrastructure
Year of study
Declared unit
kg CO2 -eqv
A41
1 m2 of Steni Nature faccedilade panel top layer white marble
Post Box 5250 Majorstuen 0303 Oslo
Declaration number
Owner of the declaration
+47 33 15 56 00torstenino
NEPD 0096E rev1
Product category rules (PCR) of Building boards NPCR 010
ISO 90012008 Approval No00022
Kari Soslashrnes SINTEF Building and infrastructure Dr ing Sverre Fossdal
A1 - A314
141MJ
Steni Nature faccedilade panel with white marble Imago
type M
Approved according to ISO14025 814
Product
Program holder
(Independent verifier approved by EPD Norway)
01022014
internally
Comparability
EPD of construction products may not be comparable if they not comply with EN 15804 and seen in a the building context
Independent verification of data and other environmental information has been carried out in accordance with ISO14025 813
2013
Laringgendalsveien 2633 3277 Stensholt Norway
NO 944012044
1 m2 Steni Nature faccedilade panel top layer white marble with a service life of 60 years
Issue date
This declaration is based on Product Category Rules
Declared unit
externally
Functional unit Valid to01022019 (validity extended to 01092020)
114
Central warehouse is the production site
The product contains no substances from the REACH Candidate list or the Norwegian priority list
1 m2 of Steni Nature faccedilade panel top layer white marble
Key environmental indicatorsGlobal warmingEnergy useDangerous substances
Verification
--
TransportA41
MJMJ
Renewable energyNon renewable energy
The environmental product declaration has been
worked out by
Cradle to gateUnit
(Chairman of the Verification Group of EPD-Norway)
The Norwegian EPD Foundation
27
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 2
xxxx
ProductTechnical data
Market
Product specification Reference service life
MaterialsPolymer FillersChemical additivesCrushed stone Fiber glassTop layer - white marmour
LCA Calculation rulesSystem boundary
Data quality Cut-off criteria
Allocation
Declared unit with option
kg182 12 424
1 m2 Steni Nature faccedilade panel top layer white marble with a service life of 60 years
The analysis includes steps A1-A3 scenario for A4 A5 B2 C2 and C4 as shown in flow chart
420 27
Europe
The panel has Sintef Technical approval TG 2165
500 32
27 005 03
Product description
Steni Nature faccedilade panel is an exterior wall cladding system The panel comes with different types of top layer both stone type colour and roughness
The panel is 14 mm thick and the weight is average 15 kg m2
3 045
The data for the production is gathered from Steni and is of good quality For background data the Ecoinvent database v22 is used and is considered to be representative
60 years
All major raw materials and all the essential energy is included The production process for raw materials and energy flows that are included with very small amounts (lt1) are not included This cut-off rule does not apply for hazardous materials and substances
The allocation is made in accordance with the provisions of
EN 15804 Incoming energy and water and waste production in-house production is allocated equally among all products through mass allocation Effects of primary production of recycled materials allocated to the main product in which the material was used The recycling process and transportation of the material is allocated to this analysis
Raw materials
ProductionEnergyWaste
PackingWoodPlasticCard board
Installation at the construction siteScenario electricity
End of lifeWaste to landfill
Transport
Transport
Tran
spor
t
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 3
xxxx
LCA Scenarios and additional technical information
Truck 16-32 tonne ltkm
Additional information
Installation in the building (A5) End of Life (C1 C3 C4)
Auxiliary Hazardous waste disposedWater consumption Collected as mixed construction wasteElectricity consumption ReuseOther energy carriers RecyclingMaterial loss Energy recoveryOutput materials from waste treatment To landfillDust in the air
Transport to waste processing (C2)
Truck 16-32 tonne ltkm
LCA Results
System boundaries (X=included MND=module not declared MNR=module not relevant)
kg
15
kg
Value
FuelEnergy consumption
kg
Value (lt)
005
MNR
Lorry (Euro 4)
Type
Type
Transport to central warehouse in Norway is set to 0 km since the central warehouse is at the production location
Product stage
C4
MND
Beyond the system
boundaries
B2
Mai
nten
ance
B6
Lorry (Euro 4) 50
End of life stage
B3
MNR MNRMNR
Was
te p
roce
ssin
g
B7
kg
MNR
Use stage
Ope
ratio
nal w
ater
use
B4
kg
De-
cons
truct
ion
dem
oliti
on
C1
Rep
air
Rep
lace
men
t
Distance km
50
C2
Tran
spor
t
Use
Ref
urbi
shm
ent
B5
Capacity utilisation (incl return)
Type of vehicle
A1
X XMND MND
C3
The results from the EPD show that the largest contribution of the environmental impact is the production of raw materials A1 Less then 1 of the GWP is due to the production of the top layer material Also transport A2 is a significant share of the environmental load
Man
ufac
turin
g
Tran
spor
t
Raw
mat
eria
ls
A2
MNR
D
Dis
posa
l
Reu
se-R
ecov
ery-
Rec
yclin
g-po
tent
ial
kgkg
Ope
ratio
nal e
nerg
y us
e
Tran
spor
t
Con
stru
ctio
n in
stal
latio
n st
age
B1A3 A4 A5
Construction installation stage
kgm3
kg
Distance km FuelEnergy consumption
Capacity utilisation (incl return)
Type of vehicleTransport from production place to user (A4)
kg
Unit
kWhMJ
50
Unit Value
The following information describe the scenarios in the different modules of the EPD
300
Value (lt)
MNRXX XXX
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 4
xxxx
Environmental impact
Resource useParameter
End of life - WasteParameter
End of life - Output flowParameter
Reading example 90 E-03 = 9010-3 = 0009
4435
210E-01
A2
234E-04
069
297E-05
009
1189 045
A3 A1-A3
700811443 0000234
103
A4
C4004
476E-04 139E-03
GWP Global warming potential (kg CO2-eqv) ODP Depletion potential of the stratospheric ozone layer (kg CFC11-eqv) POCP Formation potential of tropospheric photochemical oxidants (kg C2H4-eqv) AP Acidification potential of land and water (kg SO2-eqv) EP Eutrophication potential (kg PO4
3--eqv) ADPM Abiotic depletion potential for non fossil resources (kg Sb -eqv) ADPE Abiotic depletion potential for fossil resources (MJ)
326E-07 165E-08 104E-07
205E-04124E-02 221E-03
C2
659E-04 171E-03
239E-07
755E-05626E-04
021
208
285E-07
179E-02
474E-06
639E-10
001
401E-03143E-03318E-02 940E-03
298E-04336E-03
A1
388E-06 834E-08
038
159E-02
GWPA4 A5
181E-06
234E-04
125E-04
556E-07
914E-04 358E-03
171E-03
C2
MER
C4
811E-05
657E-04
769E-04
A4
659E-04
640E-03
4231
009
A1-A3
NRSF
A1-A31189
A5
000
EEE
CR
ETE
179E-02
A1
99E-11
003 004
1500
A5
196E-08
A5 C2 C4
151E-05
C2 C4
170E-03
003
22052795
207E-07
POCP
A4
EPAP
012
213
001
045
4207 288E-02
018
168E-06
4410
A10181462
003 221E+00
352E-08
MR
1165
A2
02111418
A3
HW Hazardous waste disposed (kg) NHW Non hazardous waste disposed (kg) RW Radioactive waste disposed (kg)
CR Components for reuse (kg) MR Materials for recycling (kg) MER Materials for energy recovery (kg) EEE Exported electric energy (MJ) ETE Exported thermal energy ( MJ)
003
1462 2695NRPENRPMTRPE
1401898E-07574E-03419E-02148E-02337E-05
2695
Parameter A1-A3
7008
TPE
028A3
022
NHWRW
W
A2
A2A1
047
RPEE Renewable primary energy resources used as energy carrier (MJ) RPEM Renewable primary energy resources used as raw materials (MJ) TPE Total use of renewable primary energy resources (MJ) NRPE Non renewable primary energy resources used as energy carrier (MJ) NRPM Non renewable primary energy resources used as materials (MJ) TRPE Total use of non renewable primary energy resources (MJ) SM Use of secondary materials (kg) RSF Use of renewable secondary fuels (MJ) NRSF Use of non renewable secondary fuels (MJ) W Use of net fresh water (m3)
150
RSF
HW
ADPM
ODP
171E-02 415E-03 024 432E-05
SM
A3
ADPE
RPEERPEM
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 5
xxxx
Specific Norwegian requirements
Electricity
kg CO2 - eqvMJ
Dangerous substances
Bibliography
PCR2007
LCA -Report
Publisher Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoProgram holder Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoOwner of the declaration Phone +47 33 15 56 00Steni AS FaxBerganmoen 3277 Steinsholt Lardal e-mail infosteninoNorway web wwwsteninoAuthor of the Life Cycle Assessment PhoneTorhildur Kristjansdottir FaxSintef Building and Infrastructure e-mail torhildurkristjansdottirsintefnoForskningsveien 3 B 0314 Oslo Norway web wwwsintefnobyggforsk
Product category rules for preparing an environmental declaration for building boards NPCR 010
11
The electricity used in the Production phase (A3) at Stensholt near Larvik in Norway is based on a factor of 392 grams CO2
eq kWh (Electricity medium voltage supply mix Norway 2007-2011)
+47 94 29 74 33
LCA- Report for environmental product declarations for Steni faccedilade panels ndash both Colour and
Nature Torhildur Kristjansdottir Sintef Building and Infrastrucutre November 2013
ISO 140442006
EN 158042012
ISO 219302007
None of the following substances have been added to the product Substances on the REACH Candidate list of substances of very high concern (of 01022014) substances on the Norwegian Priority list (of01022014) and substances that lead to the product being classified as hazardous waste The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations
Greenhouse gas emissions
Environmental labels and declarations - Type III environmental declarations - Principles and
procedures
Environmental management - Life cycle assessment - Requirements and guidelines
Sustainability of construction works - Environmental product declaration - Core rules for the
product category of construction products
Sustainability in building construction - Environmental declaration of building products
ISO 140252006
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 6
xxxx
ProductTechnical data
Market
Product specification Reference service life
MaterialsPolymer FillersChemical additivesCrushed stone Fiber glassTop layer - white marmour
LCA Calculation rulesSystem boundary
Data quality Cut-off criteria
Allocation
Declared unit with option
kg182 12 424
1 m2 Steni Nature faccedilade panel top layer white marble with a service life of 60 years
The analysis includes steps A1-A3 scenario for A4 A5 B2 C2 and C4 as shown in flow chart
420 27
Europe
The panel has Sintef Technical approval TG 2165
500 32
27 005 03
Product description
Steni Nature faccedilade panel is an exterior wall cladding system The panel comes with different types of top layer both stone type colour and roughness
The panel is 14 mm thick and the weight is average 15 kg m2
3 045
The data for the production is gathered from Steni and is of good quality For background data the Ecoinvent database v22 is used and is considered to be representative
60 years
All major raw materials and all the essential energy is included The production process for raw materials and energy flows that are included with very small amounts (lt1) are not included This cut-off rule does not apply for hazardous materials and substances
The allocation is made in accordance with the provisions of
EN 15804 Incoming energy and water and waste production in-house production is allocated equally among all products through mass allocation Effects of primary production of recycled materials allocated to the main product in which the material was used The recycling process and transportation of the material is allocated to this analysis
Raw materials
ProductionEnergyWaste
PackingWoodPlasticCard board
Installation at the construction siteScenario electricity
End of lifeWaste to landfill
Transport
Transport
Tran
spor
t
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 3
xxxx
LCA Scenarios and additional technical information
Truck 16-32 tonne ltkm
Additional information
Installation in the building (A5) End of Life (C1 C3 C4)
Auxiliary Hazardous waste disposedWater consumption Collected as mixed construction wasteElectricity consumption ReuseOther energy carriers RecyclingMaterial loss Energy recoveryOutput materials from waste treatment To landfillDust in the air
Transport to waste processing (C2)
Truck 16-32 tonne ltkm
LCA Results
System boundaries (X=included MND=module not declared MNR=module not relevant)
kg
15
kg
Value
FuelEnergy consumption
kg
Value (lt)
005
MNR
Lorry (Euro 4)
Type
Type
Transport to central warehouse in Norway is set to 0 km since the central warehouse is at the production location
Product stage
C4
MND
Beyond the system
boundaries
B2
Mai
nten
ance
B6
Lorry (Euro 4) 50
End of life stage
B3
MNR MNRMNR
Was
te p
roce
ssin
g
B7
kg
MNR
Use stage
Ope
ratio
nal w
ater
use
B4
kg
De-
cons
truct
ion
dem
oliti
on
C1
Rep
air
Rep
lace
men
t
Distance km
50
C2
Tran
spor
t
Use
Ref
urbi
shm
ent
B5
Capacity utilisation (incl return)
Type of vehicle
A1
X XMND MND
C3
The results from the EPD show that the largest contribution of the environmental impact is the production of raw materials A1 Less then 1 of the GWP is due to the production of the top layer material Also transport A2 is a significant share of the environmental load
Man
ufac
turin
g
Tran
spor
t
Raw
mat
eria
ls
A2
MNR
D
Dis
posa
l
Reu
se-R
ecov
ery-
Rec
yclin
g-po
tent
ial
kgkg
Ope
ratio
nal e
nerg
y us
e
Tran
spor
t
Con
stru
ctio
n in
stal
latio
n st
age
B1A3 A4 A5
Construction installation stage
kgm3
kg
Distance km FuelEnergy consumption
Capacity utilisation (incl return)
Type of vehicleTransport from production place to user (A4)
kg
Unit
kWhMJ
50
Unit Value
The following information describe the scenarios in the different modules of the EPD
300
Value (lt)
MNRXX XXX
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 4
xxxx
Environmental impact
Resource useParameter
End of life - WasteParameter
End of life - Output flowParameter
Reading example 90 E-03 = 9010-3 = 0009
4435
210E-01
A2
234E-04
069
297E-05
009
1189 045
A3 A1-A3
700811443 0000234
103
A4
C4004
476E-04 139E-03
GWP Global warming potential (kg CO2-eqv) ODP Depletion potential of the stratospheric ozone layer (kg CFC11-eqv) POCP Formation potential of tropospheric photochemical oxidants (kg C2H4-eqv) AP Acidification potential of land and water (kg SO2-eqv) EP Eutrophication potential (kg PO4
3--eqv) ADPM Abiotic depletion potential for non fossil resources (kg Sb -eqv) ADPE Abiotic depletion potential for fossil resources (MJ)
326E-07 165E-08 104E-07
205E-04124E-02 221E-03
C2
659E-04 171E-03
239E-07
755E-05626E-04
021
208
285E-07
179E-02
474E-06
639E-10
001
401E-03143E-03318E-02 940E-03
298E-04336E-03
A1
388E-06 834E-08
038
159E-02
GWPA4 A5
181E-06
234E-04
125E-04
556E-07
914E-04 358E-03
171E-03
C2
MER
C4
811E-05
657E-04
769E-04
A4
659E-04
640E-03
4231
009
A1-A3
NRSF
A1-A31189
A5
000
EEE
CR
ETE
179E-02
A1
99E-11
003 004
1500
A5
196E-08
A5 C2 C4
151E-05
C2 C4
170E-03
003
22052795
207E-07
POCP
A4
EPAP
012
213
001
045
4207 288E-02
018
168E-06
4410
A10181462
003 221E+00
352E-08
MR
1165
A2
02111418
A3
HW Hazardous waste disposed (kg) NHW Non hazardous waste disposed (kg) RW Radioactive waste disposed (kg)
CR Components for reuse (kg) MR Materials for recycling (kg) MER Materials for energy recovery (kg) EEE Exported electric energy (MJ) ETE Exported thermal energy ( MJ)
003
1462 2695NRPENRPMTRPE
1401898E-07574E-03419E-02148E-02337E-05
2695
Parameter A1-A3
7008
TPE
028A3
022
NHWRW
W
A2
A2A1
047
RPEE Renewable primary energy resources used as energy carrier (MJ) RPEM Renewable primary energy resources used as raw materials (MJ) TPE Total use of renewable primary energy resources (MJ) NRPE Non renewable primary energy resources used as energy carrier (MJ) NRPM Non renewable primary energy resources used as materials (MJ) TRPE Total use of non renewable primary energy resources (MJ) SM Use of secondary materials (kg) RSF Use of renewable secondary fuels (MJ) NRSF Use of non renewable secondary fuels (MJ) W Use of net fresh water (m3)
150
RSF
HW
ADPM
ODP
171E-02 415E-03 024 432E-05
SM
A3
ADPE
RPEERPEM
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 5
xxxx
Specific Norwegian requirements
Electricity
kg CO2 - eqvMJ
Dangerous substances
Bibliography
PCR2007
LCA -Report
Publisher Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoProgram holder Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoOwner of the declaration Phone +47 33 15 56 00Steni AS FaxBerganmoen 3277 Steinsholt Lardal e-mail infosteninoNorway web wwwsteninoAuthor of the Life Cycle Assessment PhoneTorhildur Kristjansdottir FaxSintef Building and Infrastructure e-mail torhildurkristjansdottirsintefnoForskningsveien 3 B 0314 Oslo Norway web wwwsintefnobyggforsk
Product category rules for preparing an environmental declaration for building boards NPCR 010
11
The electricity used in the Production phase (A3) at Stensholt near Larvik in Norway is based on a factor of 392 grams CO2
eq kWh (Electricity medium voltage supply mix Norway 2007-2011)
+47 94 29 74 33
LCA- Report for environmental product declarations for Steni faccedilade panels ndash both Colour and
Nature Torhildur Kristjansdottir Sintef Building and Infrastrucutre November 2013
ISO 140442006
EN 158042012
ISO 219302007
None of the following substances have been added to the product Substances on the REACH Candidate list of substances of very high concern (of 01022014) substances on the Norwegian Priority list (of01022014) and substances that lead to the product being classified as hazardous waste The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations
Greenhouse gas emissions
Environmental labels and declarations - Type III environmental declarations - Principles and
procedures
Environmental management - Life cycle assessment - Requirements and guidelines
Sustainability of construction works - Environmental product declaration - Core rules for the
product category of construction products
Sustainability in building construction - Environmental declaration of building products
ISO 140252006
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 6
xxxx
LCA Scenarios and additional technical information
Truck 16-32 tonne ltkm
Additional information
Installation in the building (A5) End of Life (C1 C3 C4)
Auxiliary Hazardous waste disposedWater consumption Collected as mixed construction wasteElectricity consumption ReuseOther energy carriers RecyclingMaterial loss Energy recoveryOutput materials from waste treatment To landfillDust in the air
Transport to waste processing (C2)
Truck 16-32 tonne ltkm
LCA Results
System boundaries (X=included MND=module not declared MNR=module not relevant)
kg
15
kg
Value
FuelEnergy consumption
kg
Value (lt)
005
MNR
Lorry (Euro 4)
Type
Type
Transport to central warehouse in Norway is set to 0 km since the central warehouse is at the production location
Product stage
C4
MND
Beyond the system
boundaries
B2
Mai
nten
ance
B6
Lorry (Euro 4) 50
End of life stage
B3
MNR MNRMNR
Was
te p
roce
ssin
g
B7
kg
MNR
Use stage
Ope
ratio
nal w
ater
use
B4
kg
De-
cons
truct
ion
dem
oliti
on
C1
Rep
air
Rep
lace
men
t
Distance km
50
C2
Tran
spor
t
Use
Ref
urbi
shm
ent
B5
Capacity utilisation (incl return)
Type of vehicle
A1
X XMND MND
C3
The results from the EPD show that the largest contribution of the environmental impact is the production of raw materials A1 Less then 1 of the GWP is due to the production of the top layer material Also transport A2 is a significant share of the environmental load
Man
ufac
turin
g
Tran
spor
t
Raw
mat
eria
ls
A2
MNR
D
Dis
posa
l
Reu
se-R
ecov
ery-
Rec
yclin
g-po
tent
ial
kgkg
Ope
ratio
nal e
nerg
y us
e
Tran
spor
t
Con
stru
ctio
n in
stal
latio
n st
age
B1A3 A4 A5
Construction installation stage
kgm3
kg
Distance km FuelEnergy consumption
Capacity utilisation (incl return)
Type of vehicleTransport from production place to user (A4)
kg
Unit
kWhMJ
50
Unit Value
The following information describe the scenarios in the different modules of the EPD
300
Value (lt)
MNRXX XXX
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 4
xxxx
Environmental impact
Resource useParameter
End of life - WasteParameter
End of life - Output flowParameter
Reading example 90 E-03 = 9010-3 = 0009
4435
210E-01
A2
234E-04
069
297E-05
009
1189 045
A3 A1-A3
700811443 0000234
103
A4
C4004
476E-04 139E-03
GWP Global warming potential (kg CO2-eqv) ODP Depletion potential of the stratospheric ozone layer (kg CFC11-eqv) POCP Formation potential of tropospheric photochemical oxidants (kg C2H4-eqv) AP Acidification potential of land and water (kg SO2-eqv) EP Eutrophication potential (kg PO4
3--eqv) ADPM Abiotic depletion potential for non fossil resources (kg Sb -eqv) ADPE Abiotic depletion potential for fossil resources (MJ)
326E-07 165E-08 104E-07
205E-04124E-02 221E-03
C2
659E-04 171E-03
239E-07
755E-05626E-04
021
208
285E-07
179E-02
474E-06
639E-10
001
401E-03143E-03318E-02 940E-03
298E-04336E-03
A1
388E-06 834E-08
038
159E-02
GWPA4 A5
181E-06
234E-04
125E-04
556E-07
914E-04 358E-03
171E-03
C2
MER
C4
811E-05
657E-04
769E-04
A4
659E-04
640E-03
4231
009
A1-A3
NRSF
A1-A31189
A5
000
EEE
CR
ETE
179E-02
A1
99E-11
003 004
1500
A5
196E-08
A5 C2 C4
151E-05
C2 C4
170E-03
003
22052795
207E-07
POCP
A4
EPAP
012
213
001
045
4207 288E-02
018
168E-06
4410
A10181462
003 221E+00
352E-08
MR
1165
A2
02111418
A3
HW Hazardous waste disposed (kg) NHW Non hazardous waste disposed (kg) RW Radioactive waste disposed (kg)
CR Components for reuse (kg) MR Materials for recycling (kg) MER Materials for energy recovery (kg) EEE Exported electric energy (MJ) ETE Exported thermal energy ( MJ)
003
1462 2695NRPENRPMTRPE
1401898E-07574E-03419E-02148E-02337E-05
2695
Parameter A1-A3
7008
TPE
028A3
022
NHWRW
W
A2
A2A1
047
RPEE Renewable primary energy resources used as energy carrier (MJ) RPEM Renewable primary energy resources used as raw materials (MJ) TPE Total use of renewable primary energy resources (MJ) NRPE Non renewable primary energy resources used as energy carrier (MJ) NRPM Non renewable primary energy resources used as materials (MJ) TRPE Total use of non renewable primary energy resources (MJ) SM Use of secondary materials (kg) RSF Use of renewable secondary fuels (MJ) NRSF Use of non renewable secondary fuels (MJ) W Use of net fresh water (m3)
150
RSF
HW
ADPM
ODP
171E-02 415E-03 024 432E-05
SM
A3
ADPE
RPEERPEM
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 5
xxxx
Specific Norwegian requirements
Electricity
kg CO2 - eqvMJ
Dangerous substances
Bibliography
PCR2007
LCA -Report
Publisher Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoProgram holder Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoOwner of the declaration Phone +47 33 15 56 00Steni AS FaxBerganmoen 3277 Steinsholt Lardal e-mail infosteninoNorway web wwwsteninoAuthor of the Life Cycle Assessment PhoneTorhildur Kristjansdottir FaxSintef Building and Infrastructure e-mail torhildurkristjansdottirsintefnoForskningsveien 3 B 0314 Oslo Norway web wwwsintefnobyggforsk
Product category rules for preparing an environmental declaration for building boards NPCR 010
11
The electricity used in the Production phase (A3) at Stensholt near Larvik in Norway is based on a factor of 392 grams CO2
eq kWh (Electricity medium voltage supply mix Norway 2007-2011)
+47 94 29 74 33
LCA- Report for environmental product declarations for Steni faccedilade panels ndash both Colour and
Nature Torhildur Kristjansdottir Sintef Building and Infrastrucutre November 2013
ISO 140442006
EN 158042012
ISO 219302007
None of the following substances have been added to the product Substances on the REACH Candidate list of substances of very high concern (of 01022014) substances on the Norwegian Priority list (of01022014) and substances that lead to the product being classified as hazardous waste The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations
Greenhouse gas emissions
Environmental labels and declarations - Type III environmental declarations - Principles and
procedures
Environmental management - Life cycle assessment - Requirements and guidelines
Sustainability of construction works - Environmental product declaration - Core rules for the
product category of construction products
Sustainability in building construction - Environmental declaration of building products
ISO 140252006
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 6
xxxx
Environmental impact
Resource useParameter
End of life - WasteParameter
End of life - Output flowParameter
Reading example 90 E-03 = 9010-3 = 0009
4435
210E-01
A2
234E-04
069
297E-05
009
1189 045
A3 A1-A3
700811443 0000234
103
A4
C4004
476E-04 139E-03
GWP Global warming potential (kg CO2-eqv) ODP Depletion potential of the stratospheric ozone layer (kg CFC11-eqv) POCP Formation potential of tropospheric photochemical oxidants (kg C2H4-eqv) AP Acidification potential of land and water (kg SO2-eqv) EP Eutrophication potential (kg PO4
3--eqv) ADPM Abiotic depletion potential for non fossil resources (kg Sb -eqv) ADPE Abiotic depletion potential for fossil resources (MJ)
326E-07 165E-08 104E-07
205E-04124E-02 221E-03
C2
659E-04 171E-03
239E-07
755E-05626E-04
021
208
285E-07
179E-02
474E-06
639E-10
001
401E-03143E-03318E-02 940E-03
298E-04336E-03
A1
388E-06 834E-08
038
159E-02
GWPA4 A5
181E-06
234E-04
125E-04
556E-07
914E-04 358E-03
171E-03
C2
MER
C4
811E-05
657E-04
769E-04
A4
659E-04
640E-03
4231
009
A1-A3
NRSF
A1-A31189
A5
000
EEE
CR
ETE
179E-02
A1
99E-11
003 004
1500
A5
196E-08
A5 C2 C4
151E-05
C2 C4
170E-03
003
22052795
207E-07
POCP
A4
EPAP
012
213
001
045
4207 288E-02
018
168E-06
4410
A10181462
003 221E+00
352E-08
MR
1165
A2
02111418
A3
HW Hazardous waste disposed (kg) NHW Non hazardous waste disposed (kg) RW Radioactive waste disposed (kg)
CR Components for reuse (kg) MR Materials for recycling (kg) MER Materials for energy recovery (kg) EEE Exported electric energy (MJ) ETE Exported thermal energy ( MJ)
003
1462 2695NRPENRPMTRPE
1401898E-07574E-03419E-02148E-02337E-05
2695
Parameter A1-A3
7008
TPE
028A3
022
NHWRW
W
A2
A2A1
047
RPEE Renewable primary energy resources used as energy carrier (MJ) RPEM Renewable primary energy resources used as raw materials (MJ) TPE Total use of renewable primary energy resources (MJ) NRPE Non renewable primary energy resources used as energy carrier (MJ) NRPM Non renewable primary energy resources used as materials (MJ) TRPE Total use of non renewable primary energy resources (MJ) SM Use of secondary materials (kg) RSF Use of renewable secondary fuels (MJ) NRSF Use of non renewable secondary fuels (MJ) W Use of net fresh water (m3)
150
RSF
HW
ADPM
ODP
171E-02 415E-03 024 432E-05
SM
A3
ADPE
RPEERPEM
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 5
xxxx
Specific Norwegian requirements
Electricity
kg CO2 - eqvMJ
Dangerous substances
Bibliography
PCR2007
LCA -Report
Publisher Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoProgram holder Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoOwner of the declaration Phone +47 33 15 56 00Steni AS FaxBerganmoen 3277 Steinsholt Lardal e-mail infosteninoNorway web wwwsteninoAuthor of the Life Cycle Assessment PhoneTorhildur Kristjansdottir FaxSintef Building and Infrastructure e-mail torhildurkristjansdottirsintefnoForskningsveien 3 B 0314 Oslo Norway web wwwsintefnobyggforsk
Product category rules for preparing an environmental declaration for building boards NPCR 010
11
The electricity used in the Production phase (A3) at Stensholt near Larvik in Norway is based on a factor of 392 grams CO2
eq kWh (Electricity medium voltage supply mix Norway 2007-2011)
+47 94 29 74 33
LCA- Report for environmental product declarations for Steni faccedilade panels ndash both Colour and
Nature Torhildur Kristjansdottir Sintef Building and Infrastrucutre November 2013
ISO 140442006
EN 158042012
ISO 219302007
None of the following substances have been added to the product Substances on the REACH Candidate list of substances of very high concern (of 01022014) substances on the Norwegian Priority list (of01022014) and substances that lead to the product being classified as hazardous waste The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations
Greenhouse gas emissions
Environmental labels and declarations - Type III environmental declarations - Principles and
procedures
Environmental management - Life cycle assessment - Requirements and guidelines
Sustainability of construction works - Environmental product declaration - Core rules for the
product category of construction products
Sustainability in building construction - Environmental declaration of building products
ISO 140252006
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 6
xxxx
Specific Norwegian requirements
Electricity
kg CO2 - eqvMJ
Dangerous substances
Bibliography
PCR2007
LCA -Report
Publisher Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoProgram holder Phone +47 23 08 80 00The Norwegian EPD FoundationPost Box 5250 Majorstuen 0303 Oslo e-mail postepd-norgenoNorway web wwwepd-norgenoOwner of the declaration Phone +47 33 15 56 00Steni AS FaxBerganmoen 3277 Steinsholt Lardal e-mail infosteninoNorway web wwwsteninoAuthor of the Life Cycle Assessment PhoneTorhildur Kristjansdottir FaxSintef Building and Infrastructure e-mail torhildurkristjansdottirsintefnoForskningsveien 3 B 0314 Oslo Norway web wwwsintefnobyggforsk
Product category rules for preparing an environmental declaration for building boards NPCR 010
11
The electricity used in the Production phase (A3) at Stensholt near Larvik in Norway is based on a factor of 392 grams CO2
eq kWh (Electricity medium voltage supply mix Norway 2007-2011)
+47 94 29 74 33
LCA- Report for environmental product declarations for Steni faccedilade panels ndash both Colour and
Nature Torhildur Kristjansdottir Sintef Building and Infrastrucutre November 2013
ISO 140442006
EN 158042012
ISO 219302007
None of the following substances have been added to the product Substances on the REACH Candidate list of substances of very high concern (of 01022014) substances on the Norwegian Priority list (of01022014) and substances that lead to the product being classified as hazardous waste The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations
Greenhouse gas emissions
Environmental labels and declarations - Type III environmental declarations - Principles and
procedures
Environmental management - Life cycle assessment - Requirements and guidelines
Sustainability of construction works - Environmental product declaration - Core rules for the
product category of construction products
Sustainability in building construction - Environmental declaration of building products
ISO 140252006
NEPD00096E Rev1 Steni Nature and Steni Imago facade panel 6