enviroscape mural plus! - denco sales converd...enviroscape mural plus!® enviroscape mural plus! is...

EnviroScape Mural Plus! ® EnviroScape Mural Plus! is a PVC-free wall, window or hard surface scaping product that is easy to install and just as easy to remove, while supporting LEED credit certification for green building applications. ® EnviroScape Mural Plus! is FSC certified by the Rainforest Alliance. To achieve sustainable advantage over traditional vinyl and pressure-sensitive vinyl materials, this high performance and dimensionally stable product is paper based and incorporates 10% post-consumer waste in its construction. Engineered to install easily and completely strippable, EnviroScape MuralPlus! also meets the strict California 01350 standards for indoor air quality, a prerequisite for LEED credit certification, and carries a class “A” fire rating based upon ASTM E-84. EnviroScape Mural HD (Heavy Duty) is a heavy duty enhanced version of our existing wallscape designed to provide an easier and more substantial installation. Available in Smooth or Textured - for a unique embossed surface finish. Applications • Murals • POP signage • Wall décor • Window signage • Pole Wrap ® ® Installation (an installation video can be viewed at www.converd.com) - Spray water to the back of the sheet until thoroughly saturated, or place in a dip tray. - Gently fold the sheet with adhesive parts facing each other to keep moist and allow adhesive paste to activate. - Set aside for 3 minutes. - Unfold sheet and place onto a wall from top to bottom. - Carefully smooth out bubbles and creases using a broad smoothing brush, not a squeegee, from the middle of the sheet out. - If necessary, re-spray with water around the edges during the entire process. - Allow surface to dry to the touch and wipe off any excess adhesive using a damp cloth or sponge. - Trim the excess waste using a straight knife with a fresh blade tip. Removal - Spray the surface of the mural with water, allowing the water-based adhesive to relax for easier removal. - Start at the top of the image and remove a 6-8" section of the panel completely, and then continue to draw the product back on itself at a 180° degree angle until the image is completely removed. - In instances where the substrate appears to be very tightly bonded to the surface, spray more water. - Use a wet cloth to remove any remaining adhesive from surface. (PVC-free wallscape material) ®

Upload: others

Post on 31-May-2020

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

EnviroScape Mural Plus!®

EnviroScape Mural Plus! is a PVC-free wall,window or hard surface scaping product thatis easy to install and just as easy to remove,while supporting LEED credit certification forgreen building applications.

EnviroScape Mural Plus! is FSC certifiedby the Rainforest Alliance. To achieve sustainable advantage over traditional vinyl and pressure-sensitive vinyl materials, this high performance and dimensionally stableproduct is paper based and incorporates 10% post-consumer waste in its construction.

Engineered to install easily and completely strippable, EnviroScape MuralPlus! also meetsthe strict California 01350

standards for indoor

air quality, a prerequisite for LEED creditcertification, and carries a class “A” firerating based upon ASTM E-84.

EnviroScape Mural HD (Heavy Duty) is a heavy duty enhanced version of our existing wallscape designed to provide an easier and more substantial installation.

Available in Smooth or Textured - for a unique embossed surface finish.

Applications

• Murals • POP signage• Wall décor • Window signage• Pole Wrap

Installation(an installation video can be viewed at www.converd.com)

- Spray water to the back of the sheetuntil thoroughly saturated, or place in a dip tray.- Gently fold the sheet with adhesive parts facing each other to keep moist and allow adhesive paste to activate.- Set aside for 3 minutes.- Unfold sheet and place onto a wall from top to bottom. - Carefully smooth out bubbles and creases using a broad smoothing brush, not a squeegee, from the middle of the sheet out.- If necessary, re-spray with water around the edges during the entire process. - Allow surface to dry to the touch and wipe off any excess adhesive using a damp cloth or sponge. - Trim the excess waste using a straight knife with a fresh blade tip.

Removal

- Spray the surface of the mural with water, allowing the water-based adhesive to relax for easier removal. - Start at the top of the image and remove a 6-8" section of the panel completely, and then continue to draw the product back on itself at a 180° degree angle until the image is completely removed. - In instances where the substrate appears to be very tightly bonded to the surface, spray more water. - Use a wet cloth to remove any remaining adhesive from surface.

(PVC-free wallscape material)