epec 6000 series product platform - high-performance control and display units
TRANSCRIPT
usb 50gethernet e
High-performance Control and Display UnitsEmbedded Control Units and Displays are the foundation
of machine control systems. Each unit can act as an
independent control unit in smaller systems or as a part of
the total control system. They are compact multifunction
units, and have open I/O interfaces which makes it easy to
connect commonly used devices such as sensors, actuators
and joysticks.
The design and unique shape of the unit housing protects
the electronics inside effectively against most demanding
environmental conditions, such as cold, heat, vibration,
moisture, and impacts. Units can handle impacts up to 100G,
and are water and dust proof according to IP67. This, along
with the functional design of the unit housing, makes it
possible to install them almost anywhere in the machine as
the unit seldom requires any extra protection.
The type of each input is determined by the application
software, allowing for flexible use of the unit. The units are
PLCopen programmable which makes the programming
easy and convenient, shortening development time for new
systems. CODESYS programming tool provides an easy
graphical programming environment for developers to work
with.
Epec uses gold plated, heavy duty, AMPSEAL connectors,
which are convenient to handle, both in the factory and
during the field service. Each connector is color coded and
mechanically keyed to fit only to the correct, corresponding
place. The connector type is specially designed for wire
harness use.
Up to four CAN bus interfaces increase the possibilities
of connecting other control units and CAN devices with
the unit. With several CAN bus interfaces, these units are
also capable of working as a gateway between different
CAN buses. Epec CANopen®, SAE J1939 and ISOBUS
communication protocol implementations together with
Epec MultiTool configuration support makes it possible to
easily set-up communication with the most commonly used
devices used in the mobile machinery.
Epec 6000 series - powerful and rugged displays and a remote access unit designed for extreme environmentsEpec 6ooo series product family consists of high-performance,
rugged and easily configurable 7” and 12” displays as well as
a remote access unit specially designed for mobile machinery.
Combining modern computing, software and display technology,
Epec 6000 series products are an ideal solution for the most
demanding heavy duty applications like mining machines,
construction machines, forest machines etc. Fully enclosed
aluminum housing provides water and dust proof operation
according to IP66.
codesys 3.5 programmable graphical user interface provides an opportunity to maximize machine usability
State-of-the-art CODESYS 3.5 programming environment gives
software developers unique benefits, such as an easy-to-use and
modern editor with versatile user interface design capabilities
using CODESYS 3.5 Target Visualization.
Together with our extensive set of application libraries and
MultiTool configuration tool we can offer customers a package
that significantly shortens the time-to-market by minimizing
the effort and maximizing the result of the system development
project. Epec 6000 series display units fulfil all the needs required
of a central operator interface for mobile machines.
built-in wireless communication interfaces brings industrial internet to mobile machinery
All Epec 6000 series products can be equipped with versatile
wireless communication interfaces, which makes them ideal
products to connect mobile machinery to industrial internet
solutions, such as Epec GlobE.
key characteristics• High CPU performance
• CODESYS 3.5 programmable
• Epec MultiTool support
• CAN, Ethernet, RS232 and USB interfaces
• CANopen and SAE J1939 communication
• Fully enclosed aluminum housing, IP66
Different memory sizes are available as options on request.
MiniPCIe card place enables additional options such as wireless
communication interfaces (2G/3G/GPS/Glonass or WLAN).
epec 6000 series display units• Wide viewing angles (with In-Plane Switching (IPS) technology
in 7” display)
• Excellent sunlight readability
• High-end graphics
• Display backlight control
• Connectors for external button panel, user wheel or keyboard
• Two analog camera inputs
• Built-in Speaker or Buzzer
• Capasitive or resistive touch screen depending on the model
• Different panel mounting versions also available on request
product order codes for epec 6107 display unit
e30d6107-02 (2g/3g/gps/glonass, 2 x ethernet, 2 x camera
input)
e30d6107-12 (2 x ethernet)
e30d6107-22 (2 x ethernet, 2 x camera input)
product order codes for epec 6112 display unit
e30d6112-21 (2g/3g/gps/glonass, 2 x ethernet, 2 x camera
input)
e30d6112-22 (2 x ethernet, 2 x camera input)
epec 6100 remote access unit
Epec 6100 Remote Access Unit is based on the high performance
6000 series product platform without the display panel. The
built-in 2G/3G/GPS/Glonass interface makes it an ideal gateway
to connect mobile machinery to the industrial internet when
there is no need for an on-board HMI. CODESYS 3.5 programming,
MultiTool configuration and built-in Epec GlobE support makes it
the most flexible and easy-to-use gateway product in the market.
product order code for epec 6100 remote access unit
e30d6100-21 (2g/3g/gps/glonass, 2 x ethernet)
Epec 6107 Display Unit
Epec 6100 Remote Access Unit
Epec 6112 Display Unit
Display size & resolution 7” 800 x 480 (WVGA) No display 12,1” 1024 x 768 (XGA)
Display brightness 800 nits No display 600 nits
Aspect ratio 16:9 No display 4:3
Touchscreen Resistive No touch Capacitive (PCAP)
Backlight/Lifetime LED/70.000 hrs No display LED/50.000 hrs
Processor ARM Cortex A9 Dual Core (800 MHz), 32-bit, internal Graphics Processing Unit (GPU)
Operating system Linux
Programming CODESYS 3.5 + Epec MultiTool
Memory
Flash 4 Gbyte (8 Gbyte as an option)
RAM (DDR3) 1024 Mbyte
Non-volatile RAM 512 kbyte
CAN 2
RS-232 1
USB 2
Ethernet 10/100 2
Camera inputs (analog) 2 Optional 2
I/O interface 5 pins total
DO/DI 2
AI/DI 1
DI 2
5V REF output 1
Speaker X Not Available Not Available
Buzzer Not Available Not Available X
Ambient light sensor X Not Available Not Available
Radio connectivity
GSM/GPRS/EDGE Optional X/X/X Optional
UMTS/HSPA+ Optional X/X Optional
GNSS Optional GPS and GLONASS Optional
EPEC GlobE support Yes
Connectors
AMP 1 x AMP23
M12 2/3
SMA optional 2 optional
Nom. operating voltage 12/24 VDC
Full Operating range 8,4-36V 8,4-36 V 9,2-36V
Overvoltage protection 70 VDC continuous overvoltage
Operating temperature up to -30 ... +70C
IP Class IP66
Size 183 x 128 x 49,5 mm 182 x 138 x 43 mm 310 x 290 x 82 mm
Weight 1,1 kg 0,7 kg 2,7 kg
Mounting Panel/Pedestal Direct Panel/Pedestal
Future options WLAN