EPS Easy Build In-pool Corner Steps

Image used with kind permission of CAP Pools

The easy build EPS corner step is quick and easy to assemble – 1hour

approximate build time

The easy build EPS corner step unit is suitable for liner pools. Made from a 25kg/m3 density EPS block which is covered in shaped non-corrosive Magnelis steel sheeting, the units are lightweight and easy to handle. No concreting or rendering is needed, and with adhesives included and no specialist tools required the build time is approximately one hour.

Main Features

• Quick and easy to assemble – 1hour approximate build time

• No concreting or rendering required

• No specialist tools needed

• Includes the required contact adhesive and liner protection tape

• Lightweight and easy to handle

• Delivered on a single pallet

• Suitable for factory made and site applied vinyl linings

• 4 different size options available

• All sizes of step are suitable for 90° and 6” radius corner pools

Image kindly supplied by All Swim

SpecificationsSuit both 90° and 6” radius corner pools.

25kg/m³ EPS step body.

2mm cut and shaped, non-corrosive, Magnelis steel covering.

Code Descriptions

ECS1386720 EPS CORNER STEP 1386 X 720 90°

ECS1386720R EPS CORNER STEP 1386 X 720 6”RAD

ECS15751200 EPS CORNER STEP 1575 X 1200 90°

ECS15751200R EPS CORNER STEP 1575 X 1200 6”RAD

ECS1575900 EPS CORNER STEP 1575 X 900 90°

ECS1575900R EPS CORNER STEP 1575 X 900 6”RAD

ECS20001200 EPS CORNER STEP 2000 X 1200 90°

ECS20001200R EPS CORNER STEP 2000 X 1200 6”RAD

Images kindly supplied by All Swim

Contact your Certikin stockist for prices and availability.

This literature is intended as a guide. The company reserves the right to change the specifications without notice.

www.certikin.co.ukISO 9001Registered

QualityManagement 015