Upload File

ergonomy and safety - novopress · pdf filetechnical data eco202 dimensions: up to 54 mm metal...

  • Home
  • Documents
  • Ergonomy and Safety - Novopress · PDF fileTechnical data ECO202 Dimensions: Up to 54 mm metal pipe (depending on system up to 108 mm) / up to 110 mm plastic pipe Weight: 3.9 kg Length:
2
Comfort-Line Pressing Unit ECO202 Ergonomy and Safety Advantages: Electronic monitoring of the jaw-locking-bolt and visual error indicator – for additio- nal operational safety Electronic logbook - allows for precise and quick analysis in case of errors Availible in many worldwide requested power specifications The Novopress pressing unit ECO202 of course provides the well known comfort features, like the electronic jaw-retention-bolt and the logbook, but there are more additional features included, that make working faster and safer. The time to complete a press joint was drastically reduced and thanks to the lighter and smaller design, ergonomic working is assured. The ECO202 covers the complete compatible range of use up to 54 (108) mm metal pipes and up to 110 mm plastic pipes - equivalent to the battery driven pressing unit ACO202. The ECO202 is available in many worldwide requested power specifications. Metal up to 54 (108) mm Plastic up to 110 mm One-hand operation

Upload: buihanh

Post on 03-Feb-2018

217 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: Ergonomy and Safety - Novopress · PDF fileTechnical data ECO202 Dimensions: Up to 54 mm metal pipe (depending on system up to 108 mm) / up to 110 mm plastic pipe Weight: 3.9 kg Length:

Comfort-Line Pressing Unit ECO202

Ergonomy and Safety

Advantages:

Electronic monitoring of the

jaw-locking-bolt and visual

error indicator – for additio-

nal operational safety

Electronic logbook - allows

for precise and quick

analysis in case of errors

Availible in many worldwide

requested power

specifications

The Novopress pressing unit ECO202 of course

provides the well known comfort features,

like the electronic jaw-retention-bolt and

the logbook, but there are more additional

features included, that make working faster

and safer. The time to complete a press joint

was drastically reduced and thanks to the

lighter and smaller design, ergonomic working

is assured. The ECO202 covers the complete

compatible range of use up to 54 (108) mm

metal pipes and up to 110 mm plastic pipes -

equivalent to the battery driven pressing unit

ACO202. The ECO202 is available in many

worldwide requested power specifications.

Metal up to 54 (108) mmPlastic up to 110 mm

One-hand operation

NO-P-ECO202-13-2711-JH1-GB.indd 1 05.12.13 10:52

Page 2: Ergonomy and Safety - Novopress · PDF fileTechnical data ECO202 Dimensions: Up to 54 mm metal pipe (depending on system up to 108 mm) / up to 110 mm plastic pipe Weight: 3.9 kg Length:

Technical data ECO202

Dimensions: Up to 54 mm metal pipe (depending on system up to 108 mm) / up to 110 mm plastic pipe

Weight: 3.9 kg

Length: 430 mm

Width: 75 mm

Height: 111 mm

Power consumption: 450 W

Piston force: 32 kN

Piston stroke: 40 mm

Novopress GmbH & Co. KGScharnhorststraße 1 · D-41460 Neuss Tel.: +49(0)2131-288-0 · Fax: +49(0)2131-288-55www.novopress.de · E-Mail: [email protected]

We reserve the right to make technical modifications.

Compatible press jaws and press collars

R8-

GB/

11.1

3-1

The unit is provided with an automatic sequence control, i. e., right from the beginning of power build-up, pressing takes place fully automatically, incl. return, of course. At the end of a successful press cycle, the motor is switched off automatically. A manual release valve, by which the press cycle can be interrupted anytime, ensures a high degree of application safety.

The pressing unit ECO202 can be used with all compatible Novopress press jaws produced since 1972, forming the usual reliable whole. When the jaw is inserted, the device‘s mass centre is at the handle area, so that the unit lies safe and comfortably in the hand.

Comfort-Line Pressing Unit ECO202

NO-P-ECO202-13-2711-JH1-GB.indd 2 05.12.13 10:52


High Performance Diaphragm-Free Photovoltaic Lamination · S1 models process PV panels up to 2000 mm x 1000 mm glass size : S2 models process PV panels up to 2200 mm x 1200 mm glass

 · Sistem kemudi Suspensi - Depan mm mm mm mm mm mm mm cm mm 3.720 1.560 1.825 2.200 1.480 300 977 CARRY PICK UP — PICK UP Suzuki New Carry Pick Up kini lebih TANGGUH dengan tampilan

Innovation in sheet metal forming and drainage technology · Laser machining We machine sheet metal in formats up to 4000 x 2000 mm and steel up to 25 mm, aluminium up to 12 mm and

Coaxial Adapters, Within Coaxial Adapters, Between …...Coaxial Adapters, Within (Conform to IEEE-Std-287) 1 mm Up to 110 GHz 1.85 mm Up to 65 GHz 2.4 mm Up to 50 GHz 2.92 mm Up to

BARA-RTK -BARIN-R up to 30 mm variable 135 – 165 mm height … · 2020-02-29 · -RKLT / -RTK / -RTKE / -RTKEG / -RTP height adjustable up to 30 mm variable 135 - 165 mm Schlüter®-BARIN

SET-UP SHEET SHOCK TOWER UPPER SUS HOLDER UPPER SUS … · 2020-02-14 · INFINITY IF18 Ver.2.0 mm mm FRONT mm mm FRONT mm mm FRONT CONTROLLED mm mm mm mm 18T 19T 20T 60T 61T 62T

Momen Puntir Maksimum Distribusi Bahan Bakar RANGKA Sistem kemudi Suspensi - Depan mm mm mm mm mm mm mm PICK UP PICK UP Suzuki New Carry Pick Up kini lebih TANGGUH dengan tampilan

move on! - Navkratis...14,000 mm. Plates in S355J2+N up to 150 mm. Propeller shafts with a flange diameter up to 1,300 mm and a total length up to 17,000 mm. ... bringing the bent,

LET’S OPTIMIZE - Voestalpine · 2019-07-12 · COMBINING VARYING THICKNESSES + + + From 0.7 mm up to 6.0 mm Up to band width of 750 mm Innovative joining techniques (welding, mechanical

servosdarainha.org.brservosdarainha.org.br/wp-content/uploads/2017/08/Eco202.pdf · vizinhas prepararam-se ccwn urna novena. A£m vespertjno oraçåo Oreia. d.rante a 0 na Coina das

SAP MM SET UP - ganeshsapscm.files.wordpress.com

MM in Greece & the Contribution of EPOMM-PLUS project in setting up a National MM Network

NOVOSTRICTIVE Transducer up to 4250 mm · PDF fileNOVOSTRICTIVE Transducer up to 4250 mm touchless Series TP1 Special features • Non-contacting magnetostrictive measurement technology

26HP Brochure Revised - Solis · Wheel Base (mm) Total Length (mm) Total Width (mm) Height (mm) Up to ROPS Min. Ground Clearance (mm) Front Track (mm) Rear Track (mm) 1420 1560 885

Short Stroke Transducer potentiometric 10 mm up to 150 … · Short Stroke Transducer potentiometric 10 mm up to 150 mm ... Maximum permitted torque for mounting screws 140 Ncm

The future of product marking. - dinexltd.com · in accordance with IEEE 1284 ... Print width up to mm 54.2 57 104 105.6 Material External diameter up to mm 205 205 Label width mm

HIDAY ATH GRO UP · GRO UP Industrial ... 3.0 mm Coil Cut-To-Length G.I/ Aluminium Maximum Coil Width: 1500 mm ... Orbital Stainless Steel 200 A Maximum Diameter 76.2 mm

NOVOSTRICTIVE Transducer up to 4250 mm touchless · 2020. 8. 24. · Textile Packaging Sheet metal working Woodwork • Automation Technology NOVOSTRICTIVE Transducer up to 4250 mm

NOVOSTRICTIVE Transducer up to 4250 mm touchless · NOVOSTRICTIVE Transducer up to 4250 mm touchless Series TP1 Special features • Non-contacting magnetostrictive measurement technology

YTONG UP 25 UP 30 UP 37,5...Dimenzije Grupa proizvoda mm mm mm N /mm² kg/m³ l d h Srednja vrednost pritisne čvrstoće Zapreminska masa (u suvom stanju) ρ b N/mm² /t/m³ UP 25

4 inch Barcode Label Printer SLP DX420 - · PDF filePrint Width: SLP-DX420: Up to 108 mm / SLP-DX423: Up to 105.7 mm Print Length: 6 ~ 1000 mm Media Sensor: Transmissive, Reflective

ESPM1Series - Farnell element14M5 Clearance Note: The unit takes up 20 mm of the length of the fixing screw Depth: 73 mm 60 mm 110 mm 45.5 mm 180 mm 165 mm 70 mm If y o ud esi rap

Water-resistant, fl exible, dirt-resistant mortar for joints up to ......up to 10 cm 4 mm 2.0 0.16 up to 15 cm 6 mm 2.7 0.22 up to 25 cm 8 mm 3.4 0.27 up to 30 cm 10 mm 4.2 0.38 above

Evil Mad Scientist Laboratories · 2008-01-30 · The board accommodates up to 625 LEDs in standard sizes up to 10 mm. 3 mm, 5 mm, and 8 mm LEDs will work just fine. Put them where

Short Stroke Transducer potentiometric 10 mm up … · Short Stroke Transducer potentiometric 10 mm up to 150 mm ... Maximum permitted torque for mounting screws 140 Ncm ... Electrical

for package line-up ELECTRIC CO., LTD. for package line-up パッケージ一覧表 パッケージタイプ ピン数 パッケージ名 パッケージサイズ（mm） ピンピッチ（mm）

shootersworldpowder.com · Development work involves solution of propelling charges for small calibre ammunition up to 155 mm, modular charges 155 mm, mortars up to calibre 120 mm,

DAESUNG CATALOGUEdaihaidang.com/wp-content/uploads/2018/09/DAESUNG...HOME ) > KS B DS-107 a-em Welds up to 2.5 mm mm DS-108 Welds up to 6.0 mm 450 mm DS-109 Welds up to 12 mm 550 mm

WELTER · 950 mm, module 2-34, internal Ø 200 - 1800 mm, module 2-10 Worm gears: Gear Ø up to 3000 mm, module 1-34 Worms: Grinding Ø up to 500 mm, module 1-34 Gear Manufacturing

UG MM LAB WRITE UP

Up toUp to 24 51 - content2.smcetech.com · 27 mm 26 mm 26 mm 37 mm 29 mm 29 mm 31 mm 30 mm Applications expanded by making it possible to select either male or female thread within

Thermoplastic Pipe Clamps up to d = 160 mm

LRFD PIPE CULVERT BURIAL TABLES (BDE)...42 in. and 48 in. (250 mm, 300 mm, 1050 mm and 1200 mm), Types 2, up to and including 48 in. (1200 mm), Type 3, up to and including 18 in. (450

Product Programme Construction 2020 Machines and …...CORE DRILLING 4 Core drill motors CD DDE Up to Ø 162 mm 1.8 kW with percussion Up to Ø 450 mm 3.3 kW 3 gears Up to Ø 500 mm

SET-UP SHEET 1/10 Electric Touring Carsite.petitrc.com/reglages/arc/setupr12/R12_Jesper...SET-UP SHEET DOWNSTOP RIDE HEIGHT DOWNSTOP mm mm mm mm mm mm CAMBER CAMBER FRONT ˚ ˚ ˚