ersan Üstündag iowa state university engineering diffraction: update and future plans
Post on 22-Dec-2015
221 views
TRANSCRIPT
![Page 1: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/1.jpg)
Ersan Üstündag
Iowa State University
Engineering Diffraction:
Update and Future Plans
![Page 2: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/2.jpg)
Engineering Diffraction: Scope
Main objective: Predict lifetime and performance Needed:
– Accurate in-situ constitutive laws: = f()– Measurement of service conditions: residual and internal stress
![Page 3: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/3.jpg)
Typical engineering studies:– Deformation studies– Residual stress mapping– Texture analysis– Phase transformations
Challenges:– Small strains (~0.1%)– Quick and accurate setup– Efficient experiment design and
execution– Realistic pattern simulation– Real time data analysis– Realistic error propagation– Comparison to mechanics
models– Microstructure simulation
Incidenth1k1l1
Scatteredh1k1l1 Incident
h2k2l2
Scatteredh2k2l2
Incident Neutron Beam
+90° DetectorBank
-90° DetectorBank
Q Q
Compression axisBragg’s law: = 2dsin
100
0
hkl
hkl
hkl
hklhklelhkl d
d
d
dd
Engineering Diffraction: Typical Experiment
Eng. Diffractometers:
SMARTS (LANSCE)
ENGIN X (ISIS)
VULCAN (SNS)
![Page 4: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/4.jpg)
Engineering Diffraction: Vision for DANSE
Objectives:– Enable new science (& enhance the value of EngND output)– Utilize beam time more efficiently– Help enlarge user community
Approach:– Experiment planning and setup: (Task 7.1)
» Experiment design» Optimum sample handling (SScanSS)» Error analysis
– Mechanics modeling (FEA, SCM): (Task 7.2)» Multiscale (continuum to mesoscale)» Constitutive laws: = f()
– Experiment simulation: (Task 7.3)» Instrument simulation (pyre-mcstas)» Microstructure simulation (forward / inverse analysis)
Impact:– Re-definition of diffraction stress analysis– Easy transfer to synchrotron XRD
![Page 5: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/5.jpg)
Incident Neutron Beam
+90° DetectorBank
-90° DetectorBank
Q Q
Compression axis
Engineering Diffraction: Typical Experiment
Proposed Applications
1. Experiment Design and Simulation
• Instrument simulation
• Optimization of parameters
• Microstructure simulation
2. Mechanics modeling I: finite element analysis (FEA)
3. Mechanics modeling II: self-consistent modeling (SCM)
4. Data analysis
Efforts underway in all of these tasks
![Page 6: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/6.jpg)
Experiment Design and Simulation
Instrument simulation
– McStas
– Machine studies (SMARTS, ENGIN X)
Optimization of parameters
– Sample setup and alignment (SScanSS)
– Parametric studies (e.g., neural network analysis)
Microstructure simulation
– Defining the sample kernel for experiment simulation
– Full forward simulation of experiment
![Page 7: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/7.jpg)
ISIS: SScanSS Software
• Implemented on ENGIN X
• Ideal for efficient sample setup
• Controlled by IDL scripts
• Generates a computer image of sample
• Creates and executes a measurement plan
• Performs GSAS analysis
• Creates 2-D data/result plots
J. James et al.
![Page 8: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/8.jpg)
Experiment Design and Simulation
Instrument characterization (machine studies)
SMARTS
1.340 1.350 1.360 1.370 1.380
0.000
0.004
0.008
0.012
0.016
0.020
0.024
0.028
0.032
0.036
-0.010
0.000
0.010
0.020
0.030
0.040
0.050
0.060
I norm (62) I norm (63) I norm (64)N
orm
aliz
ed
inte
nsi
ty (
de
tect
ors
)
d spacing (A)
Bank 1
Si 004theta = -44.700
No
rma
lize
d in
ten
sity
(B
an
k 1
)
22000 24000 26000 28000 30000
0
2
4
6
8
10
12
14
Inte
nsity
(a.
u.)
Time-of-flight (TOF), microseconds
y = +0.16 mm (edge) y = -1.84 mm y = -3.84 mm y = -5.84 mm y = -7.84 mm y = -9.84 mm (center) y = -11.84 mm y = -13.84 mm y = -15.84 mm y = -17.84 mm y = -19.84 mm (edge)
Depth Scan
ENGIN-X
![Page 9: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/9.jpg)
Engineering Diffraction: Microstructure
Si single crystals (0.7 and 20 mm thick)
SMARTS data
Double peaks due to dynamical diffraction
(a)
Sample
Incident beam
45°
D(2)
Detectors
ts
A
B
C
1500 mm A'
B'
C'
1.33 1.34 1.35 1.36 1.37 1.380.01
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.00
0.01
0.02
0.03
0.04
0.05
Nor
mal
ized
inte
nsity
(a.
u.)
d spacing (Angstrom)
Thick Si
Thin Si
![Page 10: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/10.jpg)
Engineering Diffraction: Microstructure
Si single crystal (20 mm thick)
ENGIN-X depth scan
Data originates from surface layers
45°
Incident beam
Sample
Shield
Shield
Sampling volume
2 90°
Detectors
(b)
0.6 0.8 1.0 1.2 1.4 1.6 1.8
Inte
nsity
(a.
u.)
d spacing (Angstrom)
+0.16 mm (edge) -1.84 mm -3.84 mm -5.84 mm -7.84 mm -9.84 mm (center) -11.84 mm -13.84 mm -15.84 mm -17.84 mm -19.84 mm (edge)
Depth
E. Ustundag et al., Appl. Phys. Lett. (2006)
Critical question: Transition between a single crystal and polycrystal?
![Page 11: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/11.jpg)
Object Oriented Finite Element Analysis
A. Reid (NIST)
• Modeling of real microstructure
• Will be employed in DANSE for microstructure modeling
• Needs to become 3-D and validated
![Page 12: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/12.jpg)
Three Grain Model Description
xy
z
5 μm 5 μm
1 μm
0.1 μm
x-dim
[111] [001] [111]
Unixaxial Tension:
σapplied = 100, 200 & 300 MPa (along x)
x-dim varies:5 μm, 3 μm, 1 μm, 0.8 μm, 0.6 μm
Cu parametersC111
11 = 220.3 GPa, C11112 = 104.1 GPa, C111
44 = 40.8 GPa
C00111 = 168.4 GPa, C001
12 = 121.4 GPa, C00144 = 75.4 GPa
I.C. Noyan et al.
Microstructure Simulation
![Page 13: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/13.jpg)
Results from FE Model (300 MPa)
Using COMSOL Multiphysics, we obtain the out of plane strain along center line in central grain.
xy
z
5 μm 5 μm
1 μm
0.1 μm
3 μm
Interaction strain we are interested in measuring.
Bulk Strain Values
I.C. Noyan et al.
![Page 14: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/14.jpg)
Using kinematic diffraction theory, we simulate a rocking curve diffraction pattern.
Total peak shift of ~0.05o from any one edge.
Kinematic X-Ray Modeling
~0.05o
Individual Peaks
I.C. Noyan et al.
![Page 15: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/15.jpg)
Peak Fitting Analysis
Fitting the diffraction peak with multiple Gaussians, it is possible to determine the peak position and breadth at each step of the summation.
A FWHM value does not necessarily predict a unique strain distribution in a specimen.
I.C. Noyan et al.
•How to determine strain profiles from peak position and shape?
•What happens in the inelastic regime?
![Page 16: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/16.jpg)
Mechanics Modeling
Finite element analysis (FEA)
– ABAQUS
– Optimization of material parameters
Self-consistent modeling (SCM)
– EPSC code from LANL
– Optimization of material parameters
![Page 17: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/17.jpg)
Mechanics Modeling: FEA (Finite Element Analysis)
SNS Laptop Linux cluster
Archive NeXus
Rietveld
a1(P), a2(P)
1c, 2c
ABAQUS
E1, Y1, E2, Y2
1(a1), 2(a2)
(P)
Compare (fmin) & Optimize (E1,Y1…)
1(1), 2(2)
![Page 18: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/18.jpg)
ABAQUS CALL
call services call services
Framework
Optimizer
Visualizer
Preprocessor
Main processor
Postprocessor
Use Case Diagram for FEA Application
![Page 19: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/19.jpg)
FEA (Finite Element Analysis)
![Page 20: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/20.jpg)
Example: BMG-W fiber composite
Residual stresses
Compression loading at SMARTS
Experiments on 20% to 80% volume fraction of W
Unit cell finite element model
GSAS output for average elastic strain in W in the longitudinal direction
Reference: B. Clausen et al., Scripta Mater. 49 (2003) p. 123
BMG W-BMG composite
20% W/BMG 80% W/BMG
![Page 21: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/21.jpg)
Activity Diagram: FEA (Finite Element Analysis)
1c, 2c
ABAQUS
E1, Y1, E2, Y2
1(a1), 2(a2)
(P)
Compare & Optimize
1(1), 2(2)
experimental data
Power-law
leastsq
<include>
Voce<include>
fmin
<include><include>
Easy utilization of various software components
![Page 22: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/22.jpg)
Constitutive Laws for W and BMG
o
n
oo
ooo
for
for
σo
σ
εo ε
n=∞
n=1n=4 σ1
σo
σ
εo ε
θ1
θ0
Power-law Voce
00 1 1
1
( ) 1 exp
WBMG
Input parameters: (σ0)BMG, nBMG, (σ0)W, (σ1)W, (θ0)W, (θ1)W and DT
![Page 23: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/23.jpg)
Neural Network Analysis
Sensitivity Studies
L. Li et al.
• Strong influence by parameters: (σ0)BMG, (σ0)W, (σ1)W and (θ0)W
• Weak/no influence by parameters: nBMG, (θ1)W and DT
• Rigorous experiment planning to optimize data collection
-0.5
-0.45
-0.4
-0.35
-0.3
-0.25
-0.2
-0.15
-0.1
-0.05
0
0 500 1000 1500 2000
Applied Stress (MPa)
W L
atti
ce S
trai
n (
%) Series1
Series2
Series3
Series4
Series5
Effect of W σ1 parameter-0.45
-0.4
-0.35
-0.3
-0.25
-0.2
-0.15
-0.1
-0.05
0
0 500 1000 1500 2000 2500
Applied Stress (MPa)W
Lat
tice
Str
ain
(%
)
Series1
Series2
Series3
Series4
Series5
Effect of W θ0 parameter
Important region
-2250
-2000
-1750
-1500
-1250
-1000
-750
-500
-250
0
-0.4 -0.2 0 0.2 0.4
W lattice strain (%)
Ap
plie
d c
om
po
site
str
ess
(MP
a)
Diffraction data
Voce
Power-law
![Page 24: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/24.jpg)
Neural Network Analysis
Result
L. Li et al.
• Use of experimental data for inverse analysis
• Prediction of ‘optimum’ values of all 7 input parameters
• Previous analyses optimized only 3 parameters
W Consittutive Laws
0
500
1000
1500
2000
2500
0 1 2 3 4
Total Strain (%)
vo
n M
ise
s S
tre
ss
(M
Pa
)W (as-received)
W (in-situ by manual anal.)
W (in-situ by leastsq)
W (in-situ by ANN)
![Page 25: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/25.jpg)
FEA (Finite Element Analysis)
Custom (standard) geometries as templates
API release planned for 2007
![Page 26: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/26.jpg)
Mechanics Modeling: Self-Consistent Model
User
Reduce
()
I(TOF)
NeXus file
EPSC
<include>
<include>
pyre-mcstas<include>
c c
HEM
• Self-consistent modeling (SCM)
• Estimate of lattice strain (hkl dependent)
• Study of deformation mechanisms
002
200
1
2
002
200
1
2
002
200
3
4
002
200
3
4
103301
5 6
103301
5 6
ScatteringVector
Incident beamIncident beam DetectorDetector
• In collaboration with C. Tome (LANL)
• Parallel modularization of EPSC, VPSC codes and DANSE implementation
![Page 27: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/27.jpg)
Data Analysis
Peak fitting
– Rietveld (full-pattern) analysis GSAS, DiffLab
– Single peak fitting
Integration of mechanics models to peak fitting
– Strain anisotropy analysis
Texture analysis and visualization (MAUD)
Real-time data analysis
![Page 28: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/28.jpg)
Analysis Methods
-0.0025
-0.002
-0.0015
-0.001
-0.0005
0
-200 -150 -100 -50 0
Applied Stress (MPa)
Lat
tice
Str
ainrsca c strain
regular Rietveld c strain
single peak 002
Elastic
Data Analysis: Mechanical Loading of BaTiO3
M. Motahari et al. 2006
• Time-of-flight neutron diffraction data from ISIS
• Complete diffraction patterns in one setting
• Simultaneous measurement of two strain directions
Different data analysis approaches:
Single peak fitting: natural candidate; but some peaks vanish as the corresponding domain is depleted
Rietveld: crystallographic model fit to all peaks; but results are ambiguous
Constrained Rietveld: multi-peak fitting, but accounting for strain anisotropy (rsca); most promising
Incident Neutron Beam
+90° DetectorBank
-90° DetectorBank
Q Q
Compression axis
![Page 29: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/29.jpg)
Strain Anisotropy Analysis
Desirable to perform multi-peak fitting (e.g. via Rietveld analysis) to improve counting statistics.
Question: How to account for strain anisotropy (hkl-dependent) due to elastic constants and inelastic deformation (e.g., domain switching)?
Current approach for cubic crystals (in GSAS):
is called ‘rsca’ and is a refined parameter for some peak profiles.
Works reasonably well in the elastic regime, but not beyond.
Needed: rigorous multi-peak fitting with peak weighting and peak shift dictated by mechanics modeling.
2222222222 )/()( lkhhllkkhAhkl
cAnisotropi
hkl
Isotropic
hkl
hklhklhkl A
d
dd
0
0
cAnisotropi
hkl
Isotropichkl
ASSSSE
)2/(21
44121111
Integration of crystallographic and mechanics models
![Page 30: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/30.jpg)
Anisotropic Strain Analysis in Rietveld
a
c
cos isotropichkl
2 2 4 2 23 11 3 33 3 3 13 44
1(1 ) (1 )(2 )
hkl
l S l S l l S SE
)1()1( 23
233
432
2231 llllisotropichkl
30
35
40
45
50
55
60
0 10 20 30 40 50 60 70 80 90 100
phi angle (degrees)
Eh
kl
Ehkl
up to cos(phi)^1
up to cos(phi)^2
up to cos(phi)^3
16
18
20
22
24
26
28
30
0 20 40 60 80 100
phi angle (degrees)
1/E
hkl
1/Ehkl
1 parameter
2 parameters
3 parameter
![Page 31: Ersan Üstündag Iowa State University Engineering Diffraction: Update and Future Plans](https://reader031.vdocuments.net/reader031/viewer/2022032105/56649d805503460f94a6513c/html5/thumbnails/31.jpg)
Engineering Diffraction: Team
E. Üstündag‡, S. Y. Lee, S. M. Motahari, G. Tutuncu (ISU)
X. L. Wang‡ (SNS) - VULCAN
C. Noyan‡, L. Li, A. Ying (Columbia) – microstructure
M. Daymond‡ (Queens U., ISIS) – ENGIN X, SCM
L. Edwards‡ and J. James (Open U., U.K.) - SScanSS
C. Aydiner, B. Clausen‡, D. Brown, M. Bourke (LANSCE) - SMARTS
J. Richardson‡ (IPNS)
P. Dawson (Cornell) – 3-D FEA
H. Ceylan (ISU) - optimization
‡ Member of EngND Executive Committee